Good CompatibilityCompatible for Sony NP-F series batteries, like NP-F550,NP-F570,NP-F750,NP-F770,NP-F930,NP-F950,NP-F960,NP-F970. With USB-C and D-TAP ports, it can supply power for Sony A7V,FX30,FX3,A7IV,A7SIII, for Canon EOS R5 Mark II,R6 Mark III,R5,R5C,R6, for Panasonic S5,GH5, for Nikon Z8,ZR and other DSLR cameras, LED light, monitor, transmitter receiver, camcorder, gimbal, phone. 9600mAh High CapacityZGCINE BT-NPF970 is a 7.2V 9600mAh 69.12Wh replacement battery for NP-F970. With 36W PD fast charging technology, this NPF970 battery can be fully charged in just 3 hours, ideal for weddings, live streaming, and video recording, and outdoor adventures. Multi Ports NP-F BatteryEquipped with NP-F, D-Tap, USB-C, and BP ports, this f970 battery is compatible with all devices utilizing the NP-F series. USB-C inputoutput 36W and D-Tap output 25W deliver 61W total power for simultaneously powering devices. The bidirectional USB C port supports 36W PD fast charging, enabling rapid device charging and a full battery recharge in just 3 hours. Precision OLED DisplayA simple tap of a button instantly wakes up the ultra-clear screen. ZGCINE BT-NPF970 screen provides real-time remaining capacity, battery voltage, inputoutput power and port status, charging status, and battery temperature than other np f970 battery as for KF NEEWER SMALLRIG that merely display remaining capacity, enables you to easily monitor battery status during use. Multiple Safety Protection SystemThis NP-F970 battery features premium lithium-ion cells and comprehensive protection system designed to effectively prevent overheating, overvoltage, overcurrent, overcharging, over-discharging, overloading, and electric shock risks. It can safely discharge within a wide temperature range of -10C to 45C and safely charge at temperatures between 0C and 45C. NoteDo not use it to charge external devices while being recharged itself,as doing so may cause overheating and reduce battery lifespan.

Power up your camera with your USB-C V mount battery, power bank, wall charger, or other USB-C out power sources PD-FW50 Power input 9-12V, Output 8.4V3A. Compatible with Sony camera with NP-FW50 Battery, for Sony A7 A7R A7S A7M2 A7R2 A7S2 A6000 A6300 A6500 RX10RX10 IIRX10 IIINEX-5CNEX-5NNEX-5RZV-E10 etc. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits..

1.5H Fully ChargedSupports PD 3.0 technology, comes with a USB-C port to deliver up to 100W of power. With a 100W fast charging GaN charger included, you can have a full charged battery in just 1.5 hours-slash downtime and maximize productivity, while other V-Mount batteries take 2.5 hours or even longer. Multiple PortsWith 2 USB C, 8.4V3A DC 12V3A DC ports, BP and D Tap interfaces to simultaneously charge multiple devices like DSLR cameras Compatible with Canon Sony Nikon BMPCC 4K 6K Cinema Cameras, field monitor compatible with Godox Atomos Ninja v, etc, LED video lights, V mount battery plates VM-VP5, VM-VP4. Also comes with dust covers to protect the ports. Intelligent Battery Management System The battery features an intelligent battery management system BMS that automatically protects against short circuits, overvoltage, overcurrent, overcharging, and over discharge, and sends timely alerts in case of overpower, over current, over voltage, over temperature, and under power discharge. Aerospace aluminum casing enhancs safety and durability. Portable Airline Friendly Palm sized at 4.33 x 2.95 x 2.29inches, and weighing just 21.34oz605g, airline friendly and never adding bulks to your luggage. Additionally, it features a threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp. Real-Time Power MonitoringThe ZGCINE V Mount Battery comes equipped with a bright 1.1inch OLED screen, offering instant visibility into port status, voltage, power output, and remaining battery lifeeliminating any guesswork. Single Click Short press the power button to wake up the screen. With intuitive controls and precise monitoring, ensures you're always in charge of your power supply. Need other capacityYou can look at 50 Wh battery ZGCINE V50Asin B0B6BJ4CJX, ZGCINE X50Asin B0CQCRBZ2P, 99 Wh batteries ZGCINE V99ProAsin B0DYK7XG7H, ZGCINE X99Asin B0CQCQHMM6, 156Wh battery ZGCINE X160Asin B0CQCPK7XQ and 212 Wh battery ZGCINE X222Asin B0G5YHFNY2.

Full decoding technology prevents pop-up warnings, ensuring seamless compatible with Canon R5 Mark II, R5, R5 C, R6 Mark II, R6, R7, R, RA, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 6D, 6D Mark II, 7D, 7D Mark II, 60D, 60Da, 70D, 80D, 90D, XC10 et XC15 For LP-E6, LP-E6N and LP-E6NH battery. Perfect for time - lapse photography, starry sky photography, wedding videography, sports events videography, and online live streaming. It provides a continuous power supply, eliminating the worry of battery exhaustion during long - term shoots.. Built-in guards against overcurrent, overvoltage, short circuits, overheating, and overcharging. Protect your camera and devices with this reliable power solution.. USB-C PD input can be powered by a wall charger, V Mount Battery, V - Mount Plate, battery grip, or any device with a USB - C Output. It offers flexibility in powering your camera according to your shooting environment and setup. 60cm lightweight cable fits easily in gear bags built to withstand daily use in various shooting environments..

Dual-Port PD Fast Charging, Save TimeEquipped with dual USB-C ports, each supporting up to 18W PD fast charging. Fully charge two NP-FZ100 batteries in just 2 hours50 faster than traditional chargers.. Wide Compatibility with Sony CamerasCompatible with Sony ZV-E1, FX3, A7 IV, A7R V, A9 II, A6600, and 20 other models see full list in the description. Also works with third-party FZ100 batteries e.g., Wasabi Power, Neewer.. Compact Design with Smart ProtectionCompact and lightweight, easily fits in your camera bag. Built-in overcharge protection, temperature control, and short-circuit prevention. FCCCE certified for safety.. No Need for Original ChargerCharge directly via USB-C using a power bank, laptop, or car charger. Eliminates the need for Sonys original charging dock, making it perfect for on-the-go shooting.. Includes USB-C Cable, Ready to UseComes with a 1-meter PD fast-charging cable, compatible with most charging devices. Start charging your camera batteries right out of the box..

High Capacity V-Mount BatteryBattery Capacity 9600mAh, adopting the premier battery cells contributes to more efficiency and long-lasting time, more stable and safe. Various Types of Ports ZGCINE V160 features one BP Double D-tapDouble USB-C ports It can support multiple smart devices at the same time. Various Output USBC PD Output5V2A, 9V1.8A, 12V2A, 15V2.2A, 20V3A .D-tap Output 14.8V15A BP Output 14.8V15A. OLED DisplayCharging status and battery level can be viewed clearly through the OLED Display Screen. Charging Time of ZG-V1602.5Hours Fully Charged by 100W Charger. 3.5 Hours Fully Charged by 65W Charger.

Bi-direction PD 100W Fast-ChargingSupports PD 3.0 technology, comes with a USB-C port to deliver up to 100W of power. With a 100W fast charging GaN charger not included, you can have a full charged battery in just 1.5 hours slash downtime and maximize productivity. Additionally, it features a threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp. V Mount Battery 94.72Wh with Multiple PortsWith 2 USB C, 8.4V3A DC 12V3A DC ports, BP and D Tap interfaces to simultaneously charge multiple devices like DSLR cameras Compatible with Canon Sony Nikon BMPCC 4K 6K Cinema Cameras, field monitor compatible with Godox Atomos Ninja v, etc, LED video lights, V mount battery plates VM-VP5, VM-VP4. Also comes with dust covers to protect the ports. Portable Airline Friendly Palm sized at 4.33 x 2.95 x 2.29inches, and weighing just 21.34oz605g, airline friendly and never adding bulks to your luggage. With a capacity of 94.72Wh 6400mAh and can charge for Canon R5C for 7 hours and for Nikon Z8 5.7 hours, for MacBook 16 Pro for 1 time or for iPhone 17 Pro Max 4.3 times. Real-Time Power MonitoringThe ZGCINE V Mount Battery comes equipped with a bright 1.1inch OLED screen, offering instant visibility into port status, voltage, power output, and remaining battery lifeeliminating any guesswork. Single Click Short press the power button to wake up the screen. With intuitive controls and precise monitoring, ensures youre always in charge of your power supply. Intelligent Battery Management System The battery features an intelligent battery management system BMS that automatically protects against short circuits, overvoltage, overcurrent, overcharging, and over discharge, and sends timely alerts in case of overpower, over current, over voltage, over temperature, and under power discharge. Aerospace aluminum casing enhancs safety and durability. Need other capacityYou can look at 50 Wh battery ZGCINE V50Asin B0B6BJ4CJX, ZGCINE X50Asin B0CQCRBZ2P, 99 Wh batteries ZGCINE V99ProAsin B0DYK7XG7H, ZGCINE X99Asin B0CQCQHMM6, 156Wh battery ZGCINE X160Asin B0CQCPK7XQ and 222 Wh battery ZGCINE X222Asin B0G5YHFNY2.

Real Pocket Size TELESIN pocket charger comes in 115mm4.53inch length, 59.5mm2.34inch width,24.9mm0.98inch thickness, real thin and compact side, easy to put in your pocket and carry in hand. Note it's a single charger that needs plug in, not a power bank, no batteries included. Side Charging PortUnlike the other pocket charger in the market put their charging port at the bottom, TELESIN pocket charger built with side charging port for your charge work, which makes it possible store the charger with cable in pocket together, much more convenient for carrying.. Exclusive Smart Charging IndicatorNormally when you need to know the battery power you need to put it into the camera and check. With TELESIN pocket charger you can see the power more quickly and easily, it built with 4 smart indicator light to tell you how much your go pro power left in 4 level.. Triple Slot and Faster Charge TimeTELESIN battery pocket charger equip with 3 channel charging slot, and same as TELESIN squre and Allin in Box charger, it can store for 2 TF SD Card Note the sim card is NOT included. Whats more, it takes only 150 mins to charge 3 batteries to fully 100 power.. Compatibility and Warranty TELESIN new pocket charger is compatible with all TELESIN hero 12 11 10 9 battery, the blue one and yellow one, TELESIN Enduro battery, and for GoPro original enduro battery and standard batteries for go pro hero 11 hero 10 hero 9 black camera. Not compatible for other hero 8 7 6 5 version. 90 Days free return and refund, any problem please contact GAOPOLO customer service for help.

Dual-Port PD Fast Charging, Save TimeEquipped with dual USB-C ports, each supporting up to 18W PD fast charging. Fully charge two LPE6E6NE6NHE6P batteries in just 2 hours50 faster than traditional chargers.. Wide Compatibility with CamerasCompatible with Canon EOS R5C, R5, R6, R6 II, R7, R, 5D II, 5D III, 5D IV, 5Ds, 5Ds R, 6D, 6D II, 7D, 7D II, 60D, 60Da, 70D, 80D, 90D. Compact Design with Smart ProtectionCompact and lightweight, easily fits in your camera bag. Built-in overcharge protection, temperature control, and short-circuit prevention. FCCCE certified for safety.. No Need for Original ChargerCharge directly via USB-C using a power bank, laptop, or car charger. Eliminates the need for Sonys original charging dock, making it perfect for on-the-go shooting.. Includes USB-C Cable, Ready to UseComes with a 1-meter PD fast-charging cable, compatible with most charging devices. Start charging your camera batteries right out of the box..

Support High-Power LED LightWith 222Wh capacity, ZGCINE X222 can stably power professional-grade LED film and television lights ranging from 60W to 220W. For Godox ML80Bi, ML100R, ML100Bi, ML60II Bi, UL60, UL60Bi, UL150, UL150I, UL150II Bi for Aputure LS 60d, 60x, P60c, F21c, F21x, 60dx S, Pano 60c, 120c, STORM 80c for Nanlite Forza 60CCR 6060B II for Yongnuo LUX100 for Ulanzi VL120BiC. Bi-direction PD 140W Fast ChargingPowered by PD 3.1 technology, V mount battery X222 takes 2 hours to fully charge and comes with 2 USB-C ports to deliver up to 140W power. Boost for MacBook Pro 16 to 25 in 10 minutes. Note Please use a PD protocol charger and connect to the USB-C1 port for optimal charging. Charging via D-TAP, ensure voltage does not exceed 16.8V and current stays below 3A. 222Wh High CapacityBuilt-in high-quality LG power battery cells, with a capacity of 15000mAh and can charge for MacBook Pro 13 for 3.5 times or for iPhone 17 Pro Max 8 times, for Canon R5 C 11.5 hours, for Sony FX6 10 hour, and for BMPCC 6K Pro approximately 9 hours. X222 supports extended outdoor shoots, live streaming, and studio production, allowing you to bid farewell to battery anxiety. Multiple InterfacesWith 2 USB-C,3 D-TAP,DC 8V,DC 12V and BP ports, ZGCINE X222 versatile Vmount Battery is wide compatible for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop, video light and other photography devices. D-Tap Step-Up Under load, the D-Tap3 port can achieve 22V by long pressing the power button, re-plug to restore 14.8V. Real-Time Power MonitoringThe ZGCINE V Battery equipped with a 1.45-inch bright smart OLED digital display, offering instant visibility into port status, voltage, power output, and remaining battery life concise and clear. With precise monitoring, the ZGCINE V-Mount Battery ensures you're always in charge of your power supply. Safe Stable PowerThis ZGCINE X222 V Mount Battery is equipped with an advanced Intelligent Battery Management System BMS, overvoltage, overcurrent, overcharge, overdischarge, temperature, overpower, recovery, short circuit protection.Rigorously certified by FCC MSDS, UN38.3, IEC 62133, UL2054, and UL62368, it ensures your equipment and camera are always protected. Built to LastPorts are equipped with dust-proof caps to effectively protect ports the sturdy casing material features drop resistance, heat resistance, and flame retardant properties the scratch-resistant panel protects the smart digital display screen low temperature durability-can still release in -20 extreme cold conditions and be recyclable, which has an ultra-long service life. NoteZGCINE X222 V Mount Battery can't be taken on the plane.

Dual-Port PD Fast Charging, Save TimeEquipped with dual USB-C ports, each supporting up to 18W PD fast charging. Fully charge two NP-FW50 batteries in just 2 hours50 faster than traditional chargers.. Wide Compatibility with Sony CamerasCompatible with Sony ZV-E10, Aplha A6000, A6400, A6500, A6300, A5000, A5100, A7, A7II, A7R, A7RII, A7S, A7SII, RX10, RX10 II III IV Cameras. Compact Design with Smart ProtectionCompact and lightweight, easily fits in your camera bag. Built-in overcharge protection, temperature control, and short-circuit prevention. FCCCE certified for safety.. No Need for Original ChargerCharge directly via USB-C using a power bank, laptop, or car charger. Eliminates the need for Sonys original charging dock, making it perfect for on-the-go shooting.. Includes USB-C Cable, Ready to UseComes with a 1-meter PD fast-charging cable, compatible with most charging devices. Start charging your camera batteries right out of the box..

Universal CompatibilityThe 1.4938mm camera baseplate accessory v-mount is compatible for Canon EOS 6D II90DR5R8R6R7R10R5 IIR6 II, for Sony FX3FX30A7S III A7S IValpha A9A7SA7RA7CRA7CA6700ZV-E10ZVE10, for Nikon Zf Zfc Z30 Z9, for Fujifilm X100VI fuji X-S20 X-T5 X-H2S, for Panasonic LUMIX GH6S5 II and other DSLRmirrorless digital cameras. Quick-Release Design This compact V mount battery plate simultaneously mounts a camera and a V mount battery. It has a quick release button for effortlessly attachingdetaching VMount battery and a detachable mini V mount adapter that is compatible with Arca-Swiss 38mm quick release plate, work with the V lock system. Compatible with most v mount battery for KF NEEWER SmallRig. 90 Flexible V-Mount Plate The 90 tilt lets you mount the V mount battery in vertical or horizontal positions and keeps sure the camera flip screen fully accessible. Fold it flat and fit it inside your bag for outdoor shooting. Multiple PortsIncluding one USB-C and three D-Tap outputs,the plate v mount features power transmission capabilities, provides ample power options to meet the needs of complex camera setups. Sturdy SecureThe quick release plate features a durable aluminum alloy structure to ensure the stability for heavy cameras like the EOS R5C and LUMIX S1R. Lightweight CompactOnly 4.332.761.97 inch, ZGCINE VM-VP4 vmount plate is small and foldable to fit inside a pocket with 0.7 LB weight, minimal added bulk for handheld filming, ideal for gimbals and rigs. Independent SwitchThis vmount plate is equipped with one-key power control opening and closing, help you control over power to your accessories. Note If the bayonet mount becomes loose during use, you can refer to the instructional video and try tightening it yourself. If you encounter any other problems during use, please feel to contact us. We will provide you with comprehensive after-sales service..

This dummy battery works as an NP-FZ100 Battery for Sony ZV-E10 ii, Alpha A7III, A7 IV, a6600, A7R IV, Alpha A9 II, A7C, A7S III, A7R IV, A7C II, A7 IV, A7R V, FX30, ZV-E1, A7R III, A9, A1, A7M4, A7M3.. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output. The D-Tap Male connector has Anti-reverse indicator and it also offers 180 Degress rotation flexibility. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits..

Wide compatibility Working with Sony mirrorless cameras virtually all modern that use the NP-FZ100 battery, ZGCINE DT-FZ100 dummy battery is compatible for Sony A7, A7III, A7 V, A7 IV, A7R IV, A7RV, A7C II, A7S III, A7S3, A7CR, A1, A1 II, A6700, A6400,A6600, FX3, FX30, ZVE10 II, A7M3, Alpha A9 II ,ZVE1,etc. Regulated 8V This ZGCINE D-Tap dummy battery provides a stable 8V output, ensuring reliable power for Sony NP-FZ100 battery cameras. Compared to unregulated batteries, this battery cable for Sony is safer for the camera. It also eliminates the need for battery replacements during shooting. 12V-17V Input Voltage Accepts 12V-17V input voltage overvoltage, overheating, and overcharge short-circuit protection. 180 Rotatable D-Tap Port This NPFZ100 Dtap Male can be rotated 180, which prevents cable strain and helps organize the cables connected to Sony camera, providing greater flexibility when using the camera. Anti-reverse Connection Indicator A flashing red light indicates an incorrect connection, and the power will automatically shut off a steady green light indicates a correct connection. You don't need to worry about damaging the camera or battery connector, making your shooting safer. No Warning Fully decoded battery adapter, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original camera battery, so there is no need to worry about it getting stuck. Working for KF ZGCINE Neewer SmallRig V Mount Battery on the market, it doesn't reduce device performance and provides continuous power to the camera for extended periods. Beautiful Appearance This D Tap NP-FZ100 features an orange braided cable, which is easy to spot compared to most black cables, adding a touch of brightness to your shooting process.

Upgraded Decoding Chip Full decoding technology prevents pop-up warnings, ensuring seamless compatible with Fuji X-T5X-T4GFX100SX-H2S W235 battery models. USB-C PD Fast Charging Supports 9V-12V input output 8.4V3A regulated, compatible with most USB-C PD chargers for stable power delivery.. Uninterrupted Shooting Eliminates battery limits during video recording, live streaming, or time-lapse-ideal for long-duration content creation.. Multi-Protection Safety Design Built-in overvoltage, overheating, overcharge, and short-circuit protection to safeguard your camera and equipment.. 60cm Flexible Cable 23.5-inch durable cable for easy setup in studios or outdoor shoots.

ZGCINE DT-LM Power Cable designed for Select RED, ARRI, and SONY cameras, offers excellence in power delivery and compatibility- Max 150W 10A. The D-Tap Male connector features an innovative anti-reverse insertion indicator light,secure connections with visual feedback for added convenience. Nylon Braided for durability and resilience. LM Plug 90 right-angled 2-pin connector design. The D-Tap Male connector offers a versatile 180 rotation capability, enhancing ease of use and adaptability in various setups.

Wide compatibility Working with Sony mirrorless cameras virtually all modern that use the NP-FZ100 battery, ZGCINE PD-FZ100 dummy battery is compatible for Sony A7, A7III, A7 V, A7 IV, A7R IV, A7RV, A7C II, A7S III, A7S3, A7CR, A1, A1 II, A6700, A6400,A6600, FX3, FX30, ZVE10 II, A7M3, Alpha A9 II ,ZVE1,etc. Regulated 8V This ZGCINE USB-C Battery Dummy provides a stable 8V output, ensuring reliable power for Sony NP-FZ100 battery cameras, which is safer for your camera compared to unregulated alternatives. Safe to use This NP-FZ100 dummy battery USB C provides safety features such as full decoding and no pop-up warnings, and it securely plugs into Sony camera. Working with KF CONCEPT ZGCINE Neewer SmallRig V Mount Battery on the market, it doesn't reduce device performance and provides continuous power to the camera for extended periods. 12V-17V Input Voltage Accepts 12V-17V input voltage overvoltage, overheating, and overcharge short-circuit protection. Durable Tangle-free This ZICINE USB-C to NP-FZ100 battery dummy for Sony cameras is made of high-quality braided nylon material, making it durable and wear-resistant. The sturdy nylon braiding prevents tangling, ensuring easy and convenient setup and storage. Beautiful Appearance For Sony NP-FZ100 battery UCB-C, it features an orange braided cable, which is easy to spot compared to most black cables, adding a touch of brightness to your shooting process.

Bi-direction PD 99W Fast-Charging Supports PD 3.0 technology, comes with a USB-C port to deliver up to 99W of power. With a 99W and above fast charger, you can have this lightweight V-mount battery fully charged in just 1.5 hours. With a capacity of 94.72Wh 6400mAh, which meets the requirements 100Wh to be safely taken on airplanes as carry-on baggage and high-speed trains.. Multiple Interfaces This V mount battery comes with a BP port Input 16.8V3A MAX, Output 14.8V13A MAX, USB-C1 InOut 5V3A, 9V3A, 12V3A, 15V3A, 20V5A, D-Tap Input 16.8V3A MAX, Output 14.8V13A MAX, USB-C2 Output 5V3A, 9V3A, 12V3A, 15V3A, 20V3.25A, as well as DC 12V3A and DC 8.4V3A ports, a versatile V mount battery for phones, tablets, laptops, cameras, and video lights, etc.. Compact Size, Huge Power Only 4.33 x 2.95 x 2.29 inches 109.94 x 74.99 x 58.2mm and weighs 605g 21.34oz, with a capacity of 94.72Wh 6400mAh. It can charge an iPhone 15 Pro for 5.6 times, an iPad Pro 11-inch for 3.1 times, a MacBook Pro for 1.3 times, or power professional cameras and COB lights for hours. From outdoor vlogging and indie filmmaking to studio portraits, this battery is your endless power source, keeping your inspiration flowing without interruption.. Real-Time Power Monitoring The ZGCINE ZG-V99Pro V Mount Battery features a comprehensively upgraded smart display, offering instant visibility into the input and output status of any port. With real-time charging and discharging data available at a glance, it eliminates any guesswork. With intuitive and precise monitoring, the ZGCINE V-Mount Battery ensures you're always in complete charge of your power supply.. Comprehensive Lifecycle Safety Making safety a standard feature rather than an option. The ZGCINE V99 Pro is built with an advanced battery management system that offers 8 layers of ultimate protection overvoltage, overcurrent, overcharge, overdischarge, temperature, overpower, recovery, and short circuit protection. This comprehensive safety system ensures maximum reliability and peace of mind for you and your valuable gear during every shoot.. Extreme Cold Durability Engineered for resilience, it shows no fear of the cold and works exceptionally well even in -20C extreme conditions. Coupled with an extremely long lifespan and long-term circulation capabilities, this battery ensures reliable power delivery for your winter outdoor shoots or high-altitude expeditions..

Fully compatible with original battery The Charging case is designed for sony zv1 RX100 HX50 M5 M6 Batteries. With 5200mAh rechargeable battery, it can fully Charge battery in 2h.. Unique Design with Storage Function Precise slot design, can charge 2pcs batteries simultaneously. Insert the battery to start charging, easy to operate, just twice press the power button to turn off the charging. It can also store 2 TF Cards with 2 pcs batteries.. Reverse Charging Be Power Bank With USB-C PD output and USB-A out put, it can charge the GoPro camera,mobile phones and other devices.. Multiple Protections The NP-BX1 Charging case built-in safety integrated circuit, with multiple self-protectioin function,safe and stable.. Clearly display and easy to use Very easy installation. Easy to grasp the charging status through the indicator light..

Multi-Layer Safety Systems Built-in overcurrent, overvoltage, and short-circuit protection ensures stable power deliveryideal for Amaran 60ds60xs, Atomos Ninja V, and Hollyland Mars LED lights during extended shoots. Eliminate Battery Limits Perfect for time-lapse, starry sky photography, wedding videography, sports events, and live streamingdelivers continuous D-Tap power to keep your equipment running without interruptions.. 180 Rotatable D-Tap Anti-Reverse Protection Flexible D-Tap male rotates 180 for easy rigging LED indicator prevents reverse insertion red flasherror, auto power cut to safeguard devices and V-MountGold Mount batteries.. 60cm Durable Braided Cable Tangle-resistant braided wire 60cm balances flexibility and toughness compatible with V-MountGold Mount batteries for versatile studio, outdoor, or on-location power solutions.. 10A High-Current Output 12-17V inputoutput with 10A max current supports power-hungry gear like Feelworld monitors, camera accessories, and LED panelsno voltage drops for 4K recording or live streaming..

for devices with DC 5.5x2.5mm Input, compatible with Apture Amaran 60ds 60xs Video light, Atomos Ninja V monitor,Feelworld Monitor, Hollyland Mars 400s, Hollyland Cosmo and LED lights,with DC Input. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output DT-EL25 Power input 12-17V, Output 8.4V3A. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits. Features an Anti-reverse insertion indicator light on the D-Tap Male end.

This dummy battery works as a Replacement for Sony NP-F970 F960 F950 F770 F750 F570 F550 Battery, compatible with Camera monitors, Wireless o Transmission System , LED video lights, or other devices with NPF input. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output Power input 12-17V, Output 8.4V. D-Tap Male with Anti-reverse insertion indicator light, also offers 180 Degrees rotation flexibility. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits.. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming.

Anti-Reverse Insertion LED Indicator Prevents incorrect D-Tap insertion with visual feedback, Compatible with REDARRISONY cameras and batteries from short circuits or damage.. Straight Lemo 2Pin Precision Plug Secure, corrosion-resistant straight connector ensures stable 14.8V power transmission for professional cinema cameras during long takes. 150W High-Power Support Delivers 14.8V10A 150W max to handle demanding setups cinema cameras, LED panels, or monitorsperfect for film production, documentaries, or live broadcasts.. 180 Rotatable D-Tap Connector Flexible rotation design allows easy connection in tight camera rigs, compatible with V-mountAnton Bauer batteriesideal for dynamic film sets or outdoor shoots.. Ultra-Durable Safe 60cm nylon braided cable 70g resists tanglingabrasion built-in overvoltageoverheating protection for reliable, worry-free power in harsh shooting environments..

Full decoding technology prevents pop-up warnings, ensuring seamless compatible with Canon R5 Mark IIR5R5 CR6 Mark IIR6R7RRA5D Mark II5D Mark III5D Mark IV5DS5DS R6D6D Mark II7D7D Mark II60D60Da70D80D90DXC10XC15works as a replacement battery for LP-E6, LP-E6N and LP-E6NH battery as well. The 180 rotatable D-Tap Male connector lets you adjust the cable angle for tight setups, while the anti-reverse insertion indicator light ensures you plug it in correctly every time. Built-in guards against overcurrent, overvoltage, short circuits, overheating, and overcharging. Protect your camera and devices with this reliable power solution.. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Regulated 8V6A output, 14.8V input delivers consistent power to keep your camera running smoothly Durable 60cm Braided Cable Tangle-resistant, flexible braided wire 60cm offers easy setup in studios or outdoor shoots..

Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output DT-FW50 Power input 12-17V, Output 8.4V3A. Compatible with Sony camera with NP-FW50 Battery, for Sony A7 A7R A7S A7M2 A7R2 A7S2 A6000 A6300 A6500 RX10RX10 IIRX10 IIINEX-5CNEX-5NNEX-5RZV-E10 etc. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits..

ZGCINE DT-W235 dummy battery is a replacement battery for Fujiflilm XT5 XT4 GFX100S XH2S GFX100S Cameras. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output DT-EL25 Power input 12-17V, Output 8.4V3A. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits.

ZGCINE DT-EL15 dummy battery is a replacement battery for Nikon EN-EL15, and is fully compatible with Nikon D7100 D810 D7500 V1 Z6 II Zf Cameras. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output D-Tap Power input 12-17V, Output 8.4V3A. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits.

ZGCINE LM-P4 Power Cable Special designedfor select RED, ARRI cameras. With overvoltage, overheating, and overcharge short-circuit protection, ensure peace of mind and longevity for your valuable devices. Offer continuous power supply for video recording or live broadcast. Lemo Plug 90 right-angled 2-pin connector, offering a blend of precision for seamless connectivity.. D-Tap Plug design with 4 ports of D-Tap female connections, enhancing versatility for your power needs.

This dummy battery works as an NP-FZ100 Battery for Sony ZV-E10 ii, Alpha A7III, A7 IV, a6600, A7R IV, Alpha A9 II, A7C, A7S III, A7R IV, A7C II, A7 IV, A7R V, FX30, ZV-E1, A7R III, A9, A1, A7M4, A7M3.. USB C PD to NP-FZ100 dummy battery provides stable continuous power for Sony cameras Perfect for long video recording, live streaming, interviews, and studio shooting without battery interruption.. Supports USB-C Power Delivery input Use with PD power banks, wall chargers or V-mount batteries for reliable high-efficiency power supply during extended shoots.. Smart Protection Safe Operation Built-in intelligent chip with over-voltage, over-current and short-circuit protection ensures safe power delivery to protect your camera during continuous operation. Durable Braided Cable Design Premium braided wire construction enhances flexibility and durability. Anti-wear, anti-tangle design built for professional production environments..

Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output D-Tap Power input 12-17V, Output 8.4V3A. ZGCINE DT-BMPCC is Power cable desinged for Blackmagic Cinema Camera 4K and Blackmagic Cinema Camera 6K. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits. Features an Anti-reverse insertion indicator light on the D-Tap Male end.

Upgraded Full Decoding Chip Prevents pop-up warnings via advanced decoding technology, compatible with Panasonic GH5GH5SG9LUMIX S5S5 II BLK22 battery models. Note Due to Panasonic battery door design, battery door may not close during use.. USB-C PD Stable Power Input Supports 9V-12V input output 8.4V3A regulated, compatible with most USB-C PD chargers for reliable power delivery. Multi-Protection Safety Design Built-in overvoltage, overheating, overcharge, and short-circuit protection to safeguard your camera and equipment.. Uninterrupted Shooting for Creators Eliminates battery limits during video recording, live streaming, or time-lapse photographyideal for long-duration shoots.. 60cm Flexible Cable 23.5-inch durable cable for easy setup for camera rigs systerm..

Upgraded Decoding Chip Full decoding technology prevents pop-up warnings, ensuring seamless compatible with Nikon D7100D810D7500Z6 IIZf EN-EL15 battery models.. USB-C PD Fast Charging Supports 9V-12V input, compatible with most USB-C PD chargers for stable power delivery output 8.4V3A regulated.. Multi-Protection Safety Design Built-in overvoltage, overheating, overcharge, and short-circuit protection to safeguard your camera and equipment.. Continuous Power Supply Eliminates battery limitations during video recording, live streaming, or time-lapse photographyideal for long shooting sessions,. 60cm Flexible Cable 23.5-inch durable cable offers easy setup in studios or outdoor shoots.

Decoded chip mimics original DJI performance, with precise battery level display on the OSMO Pocket 3 LCD for real-time power monitoringFor Pocket 4 users The battery level indicator only displays the reading captured at initial connection, and will not update as the controller battery discharges. PK-H01 supports data transmission for Pocket 4.. Extended Battery Life 7.7V1600mAh high-voltage battery delivers 1.0 full charges for OSMO Pocket 3 vs. 0.6x with original 950mAh grip, eliminating low-battery interruptions during shoots.. 17W PD Fast Charging Fully charges in 60 minutes via USB-C PD supports reverse charging and low-temperature charging with zero electrical noise for safe, efficient power management.. Ultra-Compact Portable Weighing 85g and sized at 83x22x7mm, it fits in pockets or one-handed useideal for travel, vlogging, or on-the-go shooting without bulk.. Enhanced Versatility Features 14-inch threaded interface Arri positioning hole for stable tripod mounting one-touch control ensures effortless, shake-free shooting..

ZGCINE DT-W126 dummy battery is a replacement W126 Type battery for Fujiflilm XT50 XT30 XT1 XPro1 XA1 XE4 X-E1 X-M1 X-A1 FinePix HS50 EXR HS30 EXR HS33 EXR X100V. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output DT-EL25 Power input 12-17V, Output 8.4V3A. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits.

No Pop-Up Alerts Upgraded decoding chip ensures full compatible with Nikon Z50Z30Z fc.cameras, avoiding non-genuine battery pop-ups during use. USB-C PD Power Input Supports 9V-12V input and regulated 8.4V3A output, compatible with PD chargers, power banks, or wall adapters for flexible power sources.. Uninterrupted Recording Eliminates battery replacement downtime ideal for long video shoots, live streaming, or time-lapse photography.. 4-Layer Safety Protection Built-in safeguards against overvoltage, overheating, overcharging, and short circuits for secure operation.. 60cm Flexible Cable 23.5-inch 60cm durable braided cable allows easy rigging and connection to external power sources without restricting camera movement..

Power your camera and a range of accessories simultaneously using a single high-capacity V-mount battery with this V-Mount Battery Adapter Plate featuring a 15mm Rod Clamp and Adjustable Arm.. With 2 USB-C PD PortUSB-C1 PD Inputoutput 5V2.4A9V3A12V3A15V3A20V2.25A, USB-C2 PD output 5V2.4A9V3A12V3A15V3A20V3A. Support a variety of other interface output- LM Output14.8V10A, DC 8.4V3A OUT1st, DC 12V3A OUT2nd, D-Tap OUT14.8V15A2, BP OUT14.8V15A. Support one-key power control for quickly cutting OnOff the power from the battery.. The rod clamp also includes several 14-20 accessory mounting threads, providing extra options for mounting accessories..

This dummy battery works as an NP-F970F960F950F770F750F570F550 Battery, compatible with Camera monitors, Wireless transmitter-receivers, LED video lights, or other devices with NPF Type power interface.. With USB-C Input power Delivery PD, Supports multiple voltage outputs 5V, 9V, 12V, 15V, ensuring versatile use for different devices and continuous operation.. High-quality braided wire design anti-tangle and anti-break 60CM fixed length perfect for on-site shooting and live broadcast, providing long-lasting durability for on-the-go filmmakers and photographers.. Safe and Efficient Charging Provides safe and stable power delivery to your devices, preventing overcharging, short-circuits, and other safety issues, ensuring reliable performance every time... Ideal solution for long-lasting video recording, time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming.

Bi-direction PD 99W Fast-Charging Supports PD 3.0 technology, comes with a USB-C port to deliver up to 99W of power. With a 99W and above fast charger, you can have this lightweight V-mount battery fully charged in just 1.5 hours. With a capacity of 94.72Wh 6400mAh, which meets the requirements 100Wh to be safely taken on airplanes as carry-on baggage and high-speed trains.. Multiple Interfaces This V mount battery comes with a BP port Input 16.8V3A MAX, Output 14.8V13A MAX, USB-C1 InOut 5V3A, 9V3A, 12V3A, 15V3A, 20V5A, D-Tap Input 16.8V3A MAX, Output 14.8V13A MAX, USB-C2 Output 5V3A, 9V3A, 12V3A, 15V3A, 20V3.25A, as well as DC 12V3A and DC 8.4V3A ports, a versatile V mount battery for phones, tablets, laptops, cameras, and video lights, etc.. Compact Size, Huge Power Only 4.33 x 2.95 x 2.29 inches 109.94 x 74.99 x 58.2mm and weighs 605g 21.34oz, with a capacity of 94.72Wh 6400mAh. It can charge an iPhone 15 Pro for 5.6 times, an iPad Pro 11-inch for 3.1 times, a MacBook Pro for 1.3 times, or power professional cameras and COB lights for hours. From outdoor vlogging and indie filmmaking to studio portraits, this battery is your endless power source, keeping your inspiration flowing without interruption.. Real-Time Power Monitoring The ZGCINE ZG-V99Pro V Mount Battery features a comprehensively upgraded smart display, offering instant visibility into the input and output status of any port. With real-time charging and discharging data available at a glance, it eliminates any guesswork. With intuitive and precise monitoring, the ZGCINE V-Mount Battery ensures you're always in complete charge of your power supply.. Comprehensive Lifecycle Safety Making safety a standard feature rather than an option. The ZGCINE V99 Pro is built with an advanced battery management system that offers 8 layers of ultimate protection overvoltage, overcurrent, overcharge, overdischarge, temperature, overpower, recovery, and short circuit protection. This comprehensive safety system ensures maximum reliability and peace of mind for you and your valuable gear during every shoot.. Extreme Cold Durability Engineered for resilience, it shows no fear of the cold and works exceptionally well even in -20C extreme conditions. Coupled with an extremely long lifespan and long-term circulation capabilities, this battery ensures reliable power delivery for your winter outdoor shoots or high-altitude expeditions..

Large Capacity Battery HandlePowered with 7.7V1600mAh high-voltage battery, the battery handle for dji osmo pocket 4 pocket 3, for xtra muse camera can use 17W PD fast charging in about 60 minutes and at low-temperature and can fully charge your Pocket 3 camera 1.0 times.The original Battery Grip, 7.7V950mAh, can only charge 0.6 times. Four-bar battery IndicatorSalf LocketZGCINE PK-H01 features a four-bar battery Indicator, enable you to clearly know the remaining battery level. It has a built-in safety lock that automatically locks when the battery grip is connected to the Pocket 4 Pocket 3 via the Type-C interface, preventing the camera from falling. To detach the handle, simply press the unlock button for quick release. Supports Data TransmissionThe pocket 3 battery also for xtra muse battery can directly connect to a computer via data cable to read data from the memory card, facilitating quick and easy export of photos and videos, allowing you to create anytime, anywhere. Charge While UsingThe PK-H01 battery handle uses a 17W fast charging design, which can be fully charged in 1 hours. Using this battery handle does not affect the charging speed of your Pocket 4 Pocket 3, allowing you to charge the camera while using it simultaneously. Reserved 14 threadFor Dji Osmo Pocket 3 and Pocket 4 battery handle includes a reserved 14 thread port for easy connection to tripods, selfie sticks and other devices, ideal for vlogging, video recording, and filming for YouTube, TikTok, and other platforms. Compact and ComfortableErgonomic design for a more comfortable grip. With dimensions of 3.15x1.26x1.06 inches and a weight of only 0.19 pounds, the compact design can easily fit into your pocket or bag, making it perfect for travel and outdoor activities. NoteWhen the PK-H01 Battery Grip is used with the Pocket 4, the battery level indicator will only display the charge level present at the moment of connection. Even if the grip subsequently runs out of power, the display will continue to show the battery level that was read at the time of the initial connection.

Born for ProfessionalZGCINE PK-H01 Battery Grip Compatible with DJI Pocket 43,Portable Battery Handle with 17W Fast Charging,Built-in 3200mAh Battery, Reserved 14 Thread.. Accurate ControlThe industry's first third-party decoding for Pocket 43 battery handle power information, synchronized display, same as the original.. Fast ChargingThe Battery Grip for DJI Pocket 43 uses a 17W fast charging design, which can fully charge for Pocket 3 in just 60 minutes, and the grip itself can be fully charged in 90 minutes via Type C. The Type-C interface is designed as a two-way interface and can also be used as a charging bank to charge your phone.. Reserved 14 threadThe Battery Grip for Pocket 43 Battery Grip includes a reserved 14 thread port for easy connection to tripods, selfie sticks and other devices.. Safety ProtectionAdopts an integrated intelligent charging circuit to provide stable power supply, which can be charged while shooting. The power supply automatically adapts to different working voltages and can be connected to a power adapter or computer USB for charging. Working temperature -2070..

100W USB-C PD Power Delivery Charge high-demand devices like laptops cameras rapidly with 5V20V output, compatible with PD 3.0 standards for fast, stable energy transfer. 10-Port Multi-Interface Flexibility Power up to 10 devices simultaneously via 2x Lemo 2Pin 14.8V10A, 4x D-Tap 14.8V10A, 1x BP 14.8V10A, and USB-C PD ports, ideal for cameras, monitors, and film rigs. Hot-Swap Dual V-Mount Design Seamlessly switch between batteries without power interruption dual micro V-mounts enhance stability for handheldsteadicam setups and extend runtime. Professional-Grade Build Control Features one-touch power management, LED power status indicators, and a 15mm rod clamp for secure mounting on cinema rigs or tripods. Compact Travel-Ready Lightweight 1.15LB with a 4.8x4.8x3.2IN footprint, includes mounting base and USB-C E-mark cable for on-location efficiency.

Power your camera and a range of accessories simultaneously using a single high-capacity V-mount battery with this V-Mount Battery Adapter Plate featuring a 15mm Rod Clamp and Adjustable Arm.. With 2 USB-C PD PortUSB-C1 PD Output 5V2.4A9V3A12V3A15V3A20V3A, USB-C2 PD output 5V2.4A9V3A12V3A15V3A20V3A. Support a variety of other interface output-USB-A QC5V 3A 9V2A12V1.5ADC 8.4V3A Output1st, DC 12V3A Output2nd, D-tap Input16.8V3A, BP Input6.8V3A. Support one-key power control for quickly cutting OnOff the power from the battery.. The rod clamp also includes several 14-20 accessory mounting threads, providing extra options for mounting accessories..

Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output DT-LPE6 Power input 12-17V, Output 8.4V. Compatible with Canon LP-E6N LPE6 type camera for Canon EOS 5D II5D III5D IV6D6D II7D7DII60D70D80D90DXC15RR5R6R5CR5CR7R6 II. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits. The D-Tap Male connector has Anti-reverse indicator and it also offers 180 Degress rotation flexibility.

Upgraded Full Decoding Chip Prevents pop-up warnings via advanced decoding technology, ensuring seamless compatibility with Canon EOS Canon EOS RP R8 R10 R50 R100 Rebel T6i T6s T7i, T8i Rebel SL2 SL3 M3 M6 Mark II EOS 77D, 750D, 760D, 800D, KISS X8iLPE17 battery models.. Power up your camera with D-tap devices like V mount battery, Battery Grip, or other power sources with D-tap output DT-EL25 Power input 12-17V, Output 8.4V3A. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming. Multiple Safety Protection It has a built-in protection system that can prevent overcurrent, overvoltage, and short circuits. Portable Built to Last 60cm cable fits easily in gear bags, with durable materials designed to withstand daily use in studio or outdoor environments..

Ideal high-energy production workflows power solution for Sony FX3FX30A7S III A7S IV, Canon EOS 6D II,90DR5R6R7R10R5 IIR6 II, LUMIX GH6S5 II etc. Equipped with an Arca-Swiss 38mm quick release plate, this product enables seamless switching between handheld and tripod modes. The quick release plate allows for easy attachment and detachment, providing flexibility in usage. The 90 rotatable structure of this product offers easy access to flip a screen. This allows for convenient viewing and interaction from different angles. VM-VP4 Support USB PD D-Tap and BP OUT, a diverse range of interface outputs, providing extensive compatibility with different devices. The folding and telescopic design of this product makes it extremely convenient for storage.

Specifically designed for Godox AD200, AD200Pro, AD300Pro, and AD200Pro II pocket flash lights replaces original battery packs for continuous power supply via V-Mount batteries or battery grips.. Input 12V-17V Output 14.8V10A. Integrated circuit protects against overvoltage, overcurrent, and short circuits ensures reliable performance for long shooting sessions. Male D-Tap port rotates 360 to reduce cable tangling braided wire 23.6-inch60cm enhances durability and resists kinks, ideal for outdoor shooting.. Built-in indicator light red blink incorrect connection power cuts off automatically green solid safe setup prevents damage to your flash or battery.. Lightweight design no bulky battery pack simplifies on-location photography plug-and-play operation with no additional setup required.

ZGCINE PD-BMPCC is Power cable desinged for Blackmagic Cinema Camera 4K and Blackmagic Cinema Camera 6K. Power your bmpcc camera by power bank, Wall Charger, V Mount Battery, V-Mount Plate, battery grip or other Device with USBC PD Output. Ideal solution for long-lasting camera power supply requests like time-lapse photography, Starry sky photography, wedding videography, sports events videography, and online live streaming Power cable for BMPCC 4k 6K. This Cable has built-in protections against overvoltage, overheating, overcharging, and short circuits, safeguarding connected devices from potential damage. D-Tap Male connector can be rotated 180 degrees, useful for flexibility in connecting devices without worrying about the orientation.

3-Bay USB-C PD Fast Charging Simultaneously charges 3 GoPro Hero13 batteries 4.4V1A per bay via USB-C PD input 5V3A 9V3A, saving charging time for outdoor adventures.. Thermal Safety Protection Built-in overchargeshort-circuit protection and thermal optimization to extend battery lifespan.. Dual SDTF Card Slots 2 SD 2 TF memory card slots for convenient storage of media files, ideal for travel and on-location shooting.. 0.96 OLED Screen Displays real-time battery capacity and charging status, ensuring precise power management.. Compact Lightweight Net weight 135g, portable design for easy carryingperfect for vloggers, travelers, and outdoor enthusiasts..

ZGCINE NPF-01 is a multi-functional NP-F Battery charger for F970, F750.F550 Battery Pack. It can be used with NPF battery as a power sources to power your mobile phones, cameras or other devices. Output Power Type-C PD 5V2.6A, 9V2A USBA-QC5V2.6A, 9V2A, D-TAP7.4V5A MAX.

The ZGCINE VM-VP5 is a high performance battery plate engineered specifically for the Sony FX6 camera, designed to eliminate power interruptions during crucial shoots.. 19.5V Stable Output Hot-Swap Support Ensures uninterrupted shooting by enabling seamless switching between external power and Sony FX6s BP-U batteries without power loss.. Rotatable Bracket Flexible installation adapts to any shooting angle, avoiding interference with camera controls for hassle-free adjustments.. Dual Power Ports for Accessories USB-C 5V3A to 15V3A and D-Tap 14V1.5A ports charge devices like monitors, lights, or microphones, enhancing workflow efficiency.. Compact and Lightweight Design Measures 120x80x33mm and weighs 245g, ideal for on-location shoots with easy portability and quick setup..

Delivers ultra-fast charging up to 65W 20V3.25A for mirrorless cameras, smartphones, and tablets while simultaneously charging V-mount batteries via bidirectional power flow. Reversible connector eliminates wrong-way insertion. Anti-reverse indicator ensures proper polarity alignment for safe operation. Reinforced nylon braiding 14-20 screw mount point secure cable to camera cages. 20 50cm length optimizes studiofield use with 55g lightweight design. Supports PD 3.0 devices MacBook Pro, iPhone 15, Sony A7IV, etc. and all major V-mount batteries 12-17V input. Designed for Professional Video Rigs Perfect power solution for Sony FX3FX6, Canon R series, Blackmagic cameras, MacBook Pro, iPad Pro, field monitors and other USB-C powered production gear..

High Capacity for Professional Use With a 160Wh 10400mAh high-capacity lithium-ion battery, this V-Mount battery delivers long-lasting power for your video broadcast camera, camcorder, or LED light, making it ideal for extended shoots and professional productions.. Universal V-Mount Compatibility The standard V-MountV-Lock design ensures broad compatibility with most professional camcorders, cinema cameras, and studio lighting systems.. Rechargeable Travel-Friendly Rechargeable and compact, this lightweight V-Mount battery is designed for both studio and location shooting. Great for filmmakers, journalists, and content creators who need portable power without the bulk.. Power for LED Lights and More Not just for camerasthis battery can also power on-camera monitors, field recorders, and video LED light panels, offering flexible use across your production gear with stable performance.. Built-in Protection Reliable Performance Features overcharge, over-discharge, and short circuit protection to ensure safe, reliable operation. Count on this battery for stable voltage output and durability during demanding filming conditions..

Wide CompatibilityThis NP-FZ100 dummy battery is the perfect replacement for Sony NP-FZ100 batteries and is fully compatible with a range of Sony cameras, including Alpha A7 III,A7 IV,A7S III,A7R III,A7R IV,A7R V,A7C,A1,A9,A9 II,A6600,A6700,and ZV-E1. For the firmware upgrade of the FX3, FX30 cameras, this battery maybe have a warning pop-up when used, but it will not damage the camera, it can still work normally.. Continuous Power Supply SolutionOur dummy battery empowers you to extend your shooting sessions effortlessly. With D-TAP plug-in support, you can connect your camera to V mount battery, eliminating concerns about battery changes or overheating during extended recording. Ideal for video conferences, live streaming, time-lapse photography, live broadcasts, studio sessions, file transfers to your PC, and more.. User-Friendly Design Our NP-FZ100 dummy battery seamlessly pairs with most V-mount batteries on the market featuring a D-TAP output. The 180-degree rotatable D-TAP connector ensures adaptability, and orange color design looks more energetic,we provide Velcro straps for convenient storage.. No Annoying Warning Rest easy with our fully decoded dummy battery. Say goodbye to pesky warning pop-ups about potential camera damage.Our dummy battery matches the size of the original NP-FZ100 camera battery, ensuring a hassle-free fit.. Safety and Reliability at the Core Our dummy battery prioritizes safety and reliability. It features robust protection against over voltage, overheating, overcharging, and short-circuits. Crafted from fire-resistant PVC and ABS materials, it's designed to keep you and your equipment safe. Input Voltage 12V - 17V, Output 8.4V regulated 3A..

More-Port Smart NPF Battery Independent circuit design,features a standard NP-F port that fits equipment using NP-F batteries. USB-C PD inputoutput 36W and D-Tap Regulated output 8.4V3A.. Precision OLED Display Touch the button to activate the ultra-clear screen, Real-time display of remaining power and power information to know the remaining power of the battery more accurately than other batteries with LED indicator lights, and there is no need to worry about electricity.. Fast Charging PD 36W fast charging refuels this NPF970 battery in 3 hours, ideal for weddings, live streams, and outdoor adventures.. 70wH True High Capacity for Continuous PowerReplacement battery Compatible with Sony NP-F970, delivering longer runtime than the original model and extended, uninterrupted power supply for cameras.. Pro-Grade Thermal Safety Control Built with Top-tier Li-ion cells and 8-layer protection overchargeovercurrentshort-circuit. Operates safely at -10C45C discharge and 0C45C chargetrusted for outdoor film production in harsh environment..

1.Input Voltage 12V - 17V. 2.USBC PD INOUT5V2A9V1.8A12V2A15V2.2A20V3.25A. 3.D-Tap INOUT12-16.8V5A Max. 4.Power 100W Max. 5.Cable Size50CM,Weight55g.

Dual USB-C PD Fast Charging Charges 2 LP-E17 batteries simultaneously 8.4V0.6A per bay via USB-C PD input 5V3A 9V3A, ideal for quick power replenishment.. 0.96 OLED Display Real-time battery capacity and charging status monitoring for precise power management.. Safety Protection Built-in overchargeshort-circuit prevention and thermal optimization to extend battery lifespan.. 5-in-1 Card Storage 2 SD 2 TF 1 CFE Type-B card slots for organized media storageperfect for photographers and travelers.. Compact Lightweight 135g net weight with 666284mm size, portable design for on-the-go shooting hiking, vlogging, travel..

Important Safety Information for wireless microphone system - 1.Do not use, expose or store in excessive heat or excessive moist conditions. 2.This lavaliber mic when you are using, its normal to get warm. 3.Issue could not be identified Please contact customer service repair or replacement service.. 2.4G Lavalier Microphone Wireless- ZGCINE ATOM wireless lavalier microphone system with With 2.4 GHz wireless transmission technology---high signal stability, low interference and short audio delay, which help you get rid of the shackles of the cable, free your hands and speak freely. The wireless video recording microphone can be widely used for interviewing, live-stream,Vlogging,Online course,podcasting,meeting,class,speech,tour guiding,YouTube videoaudio recording, outdoor interview etc.. Working Distance Up to 50M- About the working distance of this vlogging microphone for smartphone, camera, DSLR,Laptop,PC etc.Compatible with DJI Osmo OM 4 and Osmo Mobile 3. the unobstructed effective distance can reach up to 50M, and obstructed distance can reach 30M.. Real-time Audio Monitor - The lav mic with real-time monitoring function, you can listen while recording, and monitor the audio status to complete the recording at one time.Built-in rechargeable Li-ion battery,work continuously for 6 hours after fully charged.This wireless microphones with tiny size and weightlight is very suit for outdoor photography or travelling which can be clipped directly on your clothes or attach to any photography equipment with clod shoe mount.. Lapel Microphone System with Magnetic ClipThe MagClip is a powerful magnetic clip system that allows for easy positioning of a ZGCINE ATOM transmitter. Which can even be used to place the mic discreetly on an object in a scene or on a stage to capture dialogue .Clothing can be sandwiched between the magnet and clip for total flexibility. Also you can use the extra magnetic clip to hide the Transmitter in certain occasions when in needed.Comes with one year warranty..

EXCLUSIVE CUSTOMIZATION - The charging case compatible for RODE Microphones Wireless GOGO 2.This charger box is small and compact,making it easy to charge, storage and carry.It is a good choice of accessories.. 3400MAH CAPACITY - Powerful charging station with built-in 3400mAh battery can fully charge up to 7 RODE Wireless Lavalier GO II,the charge box can be fully charged in just 2 hours.. SIMPLE CHARGING - The charging case supports multi-slot charging for up to 3 devices2TX and 1RX at the same time. Take the hassle out of charging multiple cables.. MULTIPROTECT - Built-in safety Integrated circuitry with powerful multi-protection features Compatible with Rode Wrieless Go original battery.. USB OUTPUT PORT - External USB port for charging mobile phone or other devices for emergency usage..

More Than a Charger - ZGCINE NPF battery charger not only can fast charging for NP-F battery, but also as a powering adapter uses Sony NP-F batteries to provide enough powers to the flash light or your shoot equipment when go out for a trip, which helps you to capture the wonderful moment.. Fast Charging for Any NP-F Battery - Unlike other NP-F fast charger, ZGCINE fast charger for NP-F battery adopt the latest PD fast charging technology to achieve incredible charging speeds. With ZGCINE PD fast charger you only need 14 of the charging time of other chargers to be fully charged, saving you a lot of time.. Multiple Output Ports - New upgrade to Type-C PD, USB-A QC and D-tap output, which power your camera, LED light and another accessory all at the same time unto 35W, pefect for outdoor shooting or traveling.. Helpful LED Indicator - The cool-white LED displays the NP-F battery's remaining power and charging status. Just push the button to see how much power you have left and no more guessing whether need to charge it or not.. Easy to Set Up - With 14'' standard screw can attachable to any regular sized tripod, monopod, cage and other device with standard 14 screw thread at the bottom. The thickness is only 0.86 in, ultra-thin and lightweight, easy to carry in a pocket or bag..

Compatible with Sony NP-F Battery Charge any Sony NPF battery with USB Type-C input up to 21W. Fast charging F550 fully in 1.3h For f750 in 2h For F970 in 3.5h.. Power your camera ZGCINE NPF-001 could mount your NP-F battery on your cage to power your camera and other devices with 14 industry mounting. Simultaneously use all three ports the output can up to 35W Type-C17.1W,USB-A17.1W,D-TAP37W Power your DSLR camera, a film light and a wireless microphone receiver all at the same time. Clear indicator display monitors the charging status of all the batteries 25-50-75-100.. With 14 screw hole Easy to supply power to various devices..

Compatible with Sony NP-F Battery NP-F970NP-F750NP-F550 Battery. Charge any Sony NPF battery with USB Type-C input up to 21W. Fast charging F550 fully in 1.3h For f750 in 2h For F970 in 3.5h.. Power your camera ZGCINE NPF-001 could mount your NP-F battery on your cage to power your camera and other devices with 14 industry mounting. Simultaneously use all three ports the output can up to 35W Type-C17.1W,USB-A17.1W,D-TAP37W Power your DSLR camera, a film light and a wireless microphone receiver all at the same time. Clear indicator display monitors the charging status of all the batteries 25-50-75-100.. With 14 screw hole Easy to supply power to various devices..

36 Channels UHF Wireless Microphone Compared to 2.4GHz technology, UHF technology possesses larger dynamic range of signal and more stable transmission, with less interference. ZGCINE Real mini wireless microphone provides 36 channels for choosing, various channels provides you optional choices for recording when influenced by frequency interference.Just make sure that the transmitter and receiver are in the same frequency before using.. Maximum Clear Sound Output Extra Magnetic Clip Clip-on microphone boasts SNR 90dB. The higher signal-to-noise ratio, the fewer noise mixed in the signal, delivering the maximum clear sound output while reducing background noise.The transmitter features a bulit-in mic for using directly.Extra magnetic clip are attached to keep it stick on place, reducing the noise of clothes rubbing to keep the recording voice more clearly.Or using the lavalier microphoneincluded to recording voice.. Real Time Monitoring 70m Transmission The receiver of this lavalier wireless microphone has 3.5mm TRS headphone jack for monitoring recording effect during shooting in real time. Volume range from 0-15 for adjustment while monitoring. ZGCINE one transmitter to one receiver microphone wireless set transfers stable and anti-interference signals up to 230ft70m range under the condition of no obstacle,offers a high flexibility audio performance in live broadcasting.. Double OLED Display Mini Pocket Size ZGCINE REAL wireless microphone lavalier with receiver and transmitter features OLED screen display, clearly indicates the parameters,such as current channel, frequency, dB input volume on transmitter, monitoring volume on receiver, battery status and signal, helps you to know your devices status and make instant adjustment at any time while using. This mini wireless recording microphone is very light and small, easy to carry, portable for outdoor using.. Long Working Time Widely Use With built-in rechargeable battery600mAh,this lav mic for recording supports TYPE-C interface, working hours up to 6 hours. Equipped with a 3.5mm TPSTRRS audio output, our lav microphone is compatible with DSLR,camcorder,audio recorder,phone,etc.with 3.5mm interface It could be mounted fast on the camera equipment with the cold shoe adapterincluded, compatible with various applications like interview, micro film, podcast, vlog, teaching, presentation..

Compatible with Rode Wireless GO II GO I Microphones. Built-in 3400mAh battery with 3 charging slots for up to 3 Wireless Go TX and RX units. Comfortable magnetic opening and closing mechanism, intelligent charging indicator to easily check charging status.. Only weight 265g with small size 135mm73mm66mm. Easy to carry outdoors on-the-go charging station for the Rode Wireless go.. The charging case is Made of safe fire-retardant material, can prevent battery overcharge while achieving fast charging, saving your valuable time and storage space..

Compatible with Rode Wireless GO 2 GO Built-in 3400mAh battery with 3 charging slots for up to 3 rode wireless go TX and RX units. Can be fully charged for Rode Wireless GOGO II microphone in 1 hour and up to 3 times.. Compact and light design Only weight 265g with small size 135mm73mm66mm. Easy to carry outdoors on-the-go charging station for the Rode Wireless go. Note When charging is not required, please double-click the power button to disconnect the power.. Intelligent charging system The charging case is Made of safe fire-retardant material, can prevent battery overcharge while achieving fast charging, saving your valuable time and storage space. Easy Operation Comfortable magnetic opening and closing mechanism, intelligent charging indicator to easily check charging status.. Reverse Charging be power bank Support Reverse Charging function for other devices with USB-A port for other power supply emergencies.

In order to achieve a better charging effect, it is recommended to use a PD USB C Charger that supports 45W or 60W.. Applicable equipment Video Cameras, Camera Monitor, LED Video Light, Smartphones and Other Digital Equipment. Use High Quality Imported Batteries, Supports Multiple Output and Input Ports, Fast Charging Time, and Charging Time can be Displayed on the OLED Screen.

Recommended Charger In order to achieve a better charging effect, it is recommended to use a PD USB C Charger Optional that supports 45W or 60W. Professional V Mount BatteryHigh capacity 99WH 14.8V 6800mah, this compact V-lock battery can supply enough power for professional studio lights and camcorder kits, also it can provide low-watt output for mobile phones, cameras, monitors, electric slides, and other digital equipment. Multiple outputs portsWith D-TAP BP USB-C USB-A Output ports meet all your needs in a video recording and you can use it as a power bank to charge your other devices. Built-in indicator light and OLED screen Built-in 4-level indicator light and an OLED screen, you can check the remaining battery in percentage. Fast ChargingCharge the battery with a 65W charger can be fully charged in one and a half hours. 40W high-energy high-speed charging will save you lots of time.

PACKING INCLUDED This offer comes with a ZGCINE V99 Battery, and a ZGCINE ZG-V99 PD65W Charger, and charging cables. APPLICABLE EQUIPMENT Video Cameras, Camera Monitor, LED Video Light, Smartphones and Other Digital Equipment. OLED SCREEN Battery level and Charging Time can be clearly Displayed on the OLED Screen. HIGH-QUALITY BATTERY Use High Quality Imported Batteries, Supports Multiple Output and Input Ports, Fast Charging Time. CHARGING PORT INPUT The maximum charging power is 40W PD 20V, supporting PD, QC, PPS, SCP and other protocols.