Model SARMSS-32x1515. Rack Mountable 32 Channel Splitter Snake Cable. 4 Space. Send Cable - No Returns. XLR TRS 14 Combo Jacks on the box end.

3 Pin XLR female to Dual XLR male Y Cable, This Y-cable is designed to connect an XLR output to two XLR inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console.. Compatible with equipments with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decodersand stage lighting.. Nickel Plated Connectors With Metal Serviceable Ends, OFC spiral shields for effective EMI and RFI rejection and flexibility.. Balanced Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1. A balanced connection will help reduce interferance and produce a much stronger un-distorted signal.. This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal..

SUPPORT DATA AUDIO SIGNAL TRANSPORTATION - XLR microphone cable with amazingly superior clarity and the highest cancellation of noise and RF interference. 3-conductor XLR cable design is renowned for vastly improving the rejection of noise to the tune of a 95 quieter. Balanced Shielded Cords- XLR Cables Both braided Oxygen Free Copper shielding and Aluminium shielding outside 3 conductors. Balanced XLR Male to XLR Female, Gold-Plated Connector. Assure the transportation of both data and audio signal in a smooth way.. MULTI USE- Y-shaped splitter, and the distance between the Y-shaped splitter and the XLR interface is 0.65 feet 20CM. customers can use this xlr Y cable to send 2 channel to a speaker, a recorder, a mixer, a camcorder, an amp, etc.. Before BuyPlease note 1FT the distance from the splice to the XLRend is 15cm0.5feet6.6FT10FT the distance from the splice to the XLRend is 50cm1.6feet. This distance is too shot toconnect two separated devices. For longer connection,we suggest to take our xlr extension cable together. 2 yeas warrantyWe offer 2 years warranty for this XLR patch cable, for any issues during the warranty time, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page, and we'll give response within 12 hours..

Balanced XLR Splitter Cable, 1 XLR Female to Dual XLR Male, This XLR Y-cable is designed to connect an XLR output to two XLR inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console. Compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decoders, and stage lighting.. Balanced XLR Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1, a balanced connection will help reduce interference and produce a much stronger un-distorted signal. NOTE This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.. 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.. With Heavy Duty 24K gold-plated XLR connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. It splits closer to the XLR male ends, the distance to the split point is about 10 inches25CM.. Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable..

TISINO XLR Y-Splitter Cable, 2 XLR Female to 1 XLR Male, This cable is designed to connect two XLR outputs to one XLR input, Ideal for mixer, amplifier, equalizer, limiter, crossover, digital decoders, and more for stage speaker, KTV, home theater, etc.. Balanced XLR Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1. A balanced connection will help reduce interference and produce a much stronger un-distorted signal.. 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. great choice for music lovers, It's especially great for studio or live performances.. With Heavy Duty XLR connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. It splits closer to the XLR female ends, the distance to the split point is about 19.5 inches50 cm.. Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable..

4-Channel XLR to Ethernet Adapters - Connect these two extender boxes with an Ethernet cable up to 300 ft. sold separately to carry up to 4 channels of XLR audio or 3-pin DMX control signals across stages, studios, DJ venues and live events over a single connection.. EtherCON-Compatible RJ45 Connectors - Lock the Ethernet connection in place during busy concerts and live events with EtherCON-compatible RJ45 connectors on each adapter box. Run an EtherCON-compatible Ethernet cable between the boxes up to 300 feet, and you can trust the boxes won't get detached when it matters most.. 4 Channels of Analog Audio, One Cable - Used together, these two adapters carry 4 analog XLR audio signals over one RJ45 network cable. Connect audio from mixers, microphones and instruments to the XLR ports, and run all 4 signals to the other adapter via shielded, balanced Ethernet cable sold separately.. 4 Separate DMX Control Signals - Control LED stage lights, DJ lights, fog machines and effects with up to 4 DMX signals over 3-pin XLR connectors. These adapters allow you to use up to 4 different lighting controllers to control separate lights, while minimizing long cable runs from the control room.. Carries Phantom Power for Mics and DI Boxes - Connect stereo DI boxes, groups of condenser mics and more over a single Ethernet cable to your preamps. These two adapters safely carry 48V phantom power over a compatible RJ45 network cable, so you can use phantom-powered studio or stage gear..

Split 8 balanced low impedance microphone signals into sixteen. Each channel has one direct output and one transformer-isolated output. Direct outputs pass phantom power. Ground-lift switch on each isolated output. Features a -29db attenuator pad switch on each input.

Professional series XLR plugs, designed for equipments with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting. Balanced mic cable with soft PVC jacket, strong and durable, good thick, but flexible. The housing for high?strength?zinc?alloy die-casting?polished?black?spray?paint, attractive?and?durable. High quality noise free performance, locks with worry-free 2-years warranty. Package include 1 x 0.3 meter XLR male to two female cable.

Pro-grade XLR y splitter cable is designed for a Microphone, professional recording, mixing, or studio equipment with standard 3 pin XLR connectors Connect a wireless Mic cable to 2 different inputs such as an amplifier and mixer with this Microphone Y cable. Amp y splitter cable with a soft PVC jacket in a flexible 18 inch length easily connects to equipment with a single XLR output such as a DAC or guitar amplifier Connect to a guitar amplifier with single XLR output or a DAC with single XLR output. Balanced audio options with this bi-directional XLR splitter female to dual male Split a Mic stereo to L R signal with this XLR stereo to mono cable Combine a left and right signal to a single channel with this XLR combiner cable Combine two audio feeds into a single audio track. Rugged metal connectors have easy-grip treads, molded strain-relief boots, and gold-plated contacts to provide maximum flexibility, durability and longevity Braided shielding provides 97.5 coverage for maximum cancellation of hum and noise Polyethylene insulation improves high frequency response Constructed with oxygen-free copper OFC conductors for delivering pristine sound. XLR female to 2x male cable is compatible with a wireless Microphone, PA mixing board, DAC mixer, guitar amplifier or other equipment with a 3-pin XLR connectors.

Splits a microphone to two different inputs. Phantom block?circuitry prevents interference from two?different phantom power sources.. One Male XLR and Two Female XLR. Metal.

Professional series XLR plugs, designed for equipments with 3-pin XLR connectors such as shotgun microphones, mixing boards, patch bays, preamps, speaker systems, studio harmonizers, and stage lighting. Dual XLR Male to XLR Female Y Cable, This cable is designed to connect one XLR outputs to two XLR input. It can be used to distribute the microphone signal to two channels on the mixer. This XLR Splitter Patch Cable is made of 99.99 high purity oxygen-free copperOFC, high transmission rate, the signal loss is very small.. Balanced audio cables utilize impedance balanced lines ,Enhanced internal noise suppression,that reduce EM and RF noise and extend the effective range of the cable run. 3 pin XLR Female to Dual XLR male, high quality metal housing,Designed for accurate transmission of digital audio and DMX lighting control data.

1-in6-out XLR Line-level Splitter.