FITMENT These whip light mounting brackets are compatible with Can-Am Maverick X3 Can-Am Maverick X3 MAX 2017-2024 all models, such as Can-Am Maverick X3 RS Turbor, X3 MAX Ds Turbo RR. WORK WITH VARIOUS PRODUCTS The X3 mount brackets are compatible with Radios Antenna mounts, Lighted Whips, Fiberglass whips, or anything else. DESIGN UPGRADE KEMIMOTO whip lights X3 Mounting Bracket has a 30 adjustable mounting angle for you to adjust the whip light to stand straight up or with a nice slant. And the notch cut design is for a tidy while wiring the wire. EASY INSTALLATION KEMIMOTO whip flag brackets mount on the exit holes on the right left side rear upper pillars with stock bolts. No drilling required. STURDY KEMIMOTO mount Heavy-duty material, made from 316 steel which is nice and will be very sturdy for your LED whips.

FunctionMounting a flag or whip light to your machine will give other riders notice that you are on on the track, trail, or dune.. More Sturdy Construction kemimoto mount different inner shape makes the construction more stable. Prevent hole wear problems caused by long-term use of screws.. Easy to InstallEasy to install with the mounting tool, directly bolt-on design, no drilling or trimming. kemimoto whip light mounting angle can be adjusted, you can only loosen one bolt and change it to the perfect angle you want.. AdaptabilityThe hole diameter size of the utv whip mount is about 12.2mm0.48inch, that is to say, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm.. Fitmentkemimoto utv whip mount compatible with all UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar..

Premium Sturdy BracketEhaho UTV Flag Mount is constructed from solid aluminum alloy, with reinforced thickness in key areas for stronger load-bearing capability and anti-shock. With a coated finish, offering heat and corrosion resistance, and resists rust and dirt. Designed specifically for off-road vehicles, durable and sturdy.. Universal CompatibilityComes with 3 non-slip rubber inserts with a wider range of sizes, perfect fit with 1, 1.5,1.75, and 2 in diameter Round Roll Cages. It helps dampen vibrations and protects your bull bar from being scraped. ideal for Talon, ATVs, UTVs, Trucks, Polaris RZR, Ranger, Can-Am. Multiple ApplicationSimplify the installation with no need for drilling holes in the vehicle body. The hole diameter size of the mounting bracket is 12mm0.5. Securely and quickly mount any light to roof racks, bumpers, and roll cages. Ideal for mounting whip lights, Antenna, flags, chasing lights, work lights, and Light bars.. 360 Flexible Rotation StableTruck flag mount has a flexible and sturdy 360-degree adjustable serrated engagement structure for different mounting angles. It also has built-in anti-loosening nuts and extended screw length for added stability and secure installation.. Easy InstallationDirect bolt-on design, UTV Whip Mount is easy to install with just a few screws to tighten. Comes with all hardware, no need to drill or trim. Once installed, the whip mount or flag holder will hold your flag and whip securely in place over any terrain. Please verify the dimensions of your roll bar before installation..

UTV Flag mountUTV flag mount Also know as UTV whip mount, flag mount clamp, light mounting bracket., UTV flag holder, whip light mounting bracket, UTV bar flag mount, flag pole holder, light bar mount, gives your off-road vehicle the extra touch. It is a good Practical Christmas Gift for Men Women in the special holiday season if he or she loves off-road life.. Feature Teeth Inside, Stable Flag and light whip HolderIf you look at many whip amount or UTV flag holder, you'll find that the Zidiyoruo flag mount or flag holder is Special among all flag brakets or LED whips mounts. Because it has teeth inside to hold the bar or roll cage tightly.. 360 Rotation Flag Holder BracketThe flag bracket can revolve 360, make the bracket more flexible.. Universal FitmentThis light whip mount typically used for off-road vehicles such as Can Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, ATVUTV Polaris YAMAHA, 4x4's, Jeeps,etc Where there is a bar at 1.75 to 2 , there is a flag and let whip go upstraight. No difference to install the flag and whip on left or right. Stable and Durable.. Easy InstallationOne package delivery, all hardware included. 5 screws to install it. Once intall it tightly, the whip mount or flag holder will cake your flag and whip to any terrain and maintain a good performance. 1. Universal Fits to Roll Bar from 1.75 to 2 Diameter. Please Must Check Your Car Before Making The Final Decision..

Professional Light Bar Mount Securely install LED whip light, light bars, chase lights, or off-road flags on 1.75-2 UTV roll cages. The aluminum alloy bracket with locking teeth prevents wobbling, even on rocky trails.. Zero-Slip Grip Technology Inner locking teeth bite into roll cages no drilling, ensuring rigid hold for light bars and whip flags. Tested to withstand 60 MPH vibrations.. 360 Full-Angle Adjustment Rotate light bars or flags to 12 positions 30 increments for optimal beam direction or flag visibility. Perfect for night trails or desert racing.. Universal UTVRZR Compatibility Fits Polaris RZR, Can-Am Maverick X3, Yamaha YXZ most 1.75-2 cages. Works with UTV Whip light bars up to 4.5 lbs. Quick-Install Weatherproof Set up in 3 minutes Anodized blue aluminum resists rust and UV damage survive mud, rain, or sandstorms..

Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us Our light bar clamp mount isnt just another accessoryits a game-changer for your off-road experience. Designed with riders in mind, it combines durability, flexibility, and ease of use. Whether youre tackling rocky trails or cruising through the desert, this mount keeps your light bar exactly where you need it..

Mounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the kemimoto utv flag mounts for.. High-quality Aluminum with CNC cut for perfect outlook, We are the updated version with more pins to secure the whip light sturdily, which can reduce the wear between the L bracket and Roll Bar Mount, designed for long term use.. Kemimoto Whip Light Mount can also be used to hold your off-road LED light bars, reverse light,CB radio antennas, pole, etc. The hole diameter size is about 12mm, that is to say, you can attach anything to this whip light mount as long as its base size is 12mm.. Easy to install with the mounting tool, directly bolt-on design, no drilling or trimming. The whip light mounting angle can be adjusted, you can only loosen one bolt and change it to the perfect angle you want.. UTV Whip Light Mount universally fits all UTV, such as RZR 900 1000 XP Pro, Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75 to 2 roll bar..

Package2 PCS Heavy-duty Aluminum UTV Flag Mount with hardware.. FunctionMounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the flag mounts for.. FitmentUniversal fits all UTV, such as RZR 900 1000 XP Pro, Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The flag mount can be mounted on a 1.75 to 2 roll bar.. InstallationEasy to install, all hardware included, directly bolt-on design, no drilling or trimming. The mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want.. MaterialHigh-quality Aluminum with CNC cut for perfect outlook. Flag mount is designed for long-term use, great for all weather conditions..

MATERIAL Whip mounts are made of cast aluminum and well finished. Strong, rustproof, impact-resistant, and scratch-resistant whip light mounting brackets, suitable for all weather conditions and situations. STRONGER Unique-designed flag mounts using stiffener ribs to be more stable. Cooperating with 10mm-thick bases, flag brackets would hold your products up to much off roading safer, comparing with other sheet or plastic flag mounting brackets in the market. 360 ADJUSTABLE Light bar brackets have 360 rotation adjustability for you to turn them as you like for different purposes. Light bar mounts using 12 pins to lock the mount in and keep them more stable than using a single screw. APPLICATION 12.2mm 0.48inch hole diameter of KEMIMOTO mounting brackets work great for installing led whip lights, flags, led light bars, led pods, cb antennas on the UTV cage. FITMENT CB antenna mounts only fit UTV pro-fit cages channel shaped cages, are compatible with Polaris Ranger General Polaris Expedition2024 2025 Can-Am Defender Commander 2021 Maverick Trail Sport.

Package 1pc Aluminum UTV Whip Light Mount with tools and installation instruction available. Function Mounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the KEMIMOTO mount for. In addition, the bracket adopts a double pipe clamp design, which makes the installation more secure.. Fitment KEMIMOTO whip light mount can be mounted on a 1.5 to 2 roll bar. That is to say, it works with all UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on. Installation Easy installation with all hardware included, directly bolt-on design, no drilling or trimming. KEMIMOTO whip lights mounting angle can be adjusted, you can loosen the bolt and twist it to the perfect angle you want.h RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on. Material Aluminum with CNC cut for perfect outlook. KEMIMOTO UTV whip light mount is designed for long-term use, great for all weather conditions.

HEAVY-DUTY ALUMINIUM MOUNT The UTV flag mount is crafted from CNC 6061 aluminum alloy, making it more durable than standard metal or steel, and capable of handling even the largest LED whips, with greater load-bearing capacity and impact resistance. The ATV flag mount adopts a coating surface, which is heat-resistant and corrosion-resistant, and can resist rust and dust. Premium quality makes this light bar mount more sturdy and durable.. SECURE AND STABLE DESIGNXprite light bar mounting brackets are different from other flag brackets, the whip light mount comes with widened spacers, suitable for 1.75-2 inch bars, providing a secure and stable mount for your whip lights, flag poles, light bars, spotlight, chasing light, off-road vehicle LED lights, antennas or other application equipments. 360 ROTATION FLAG HOLDER BRACKET The flag holder for truck adopts a flexible and stable 360 adjustable design, suitable for different mounting angles. At the same time, the truck flag mount has a pull-out quick adjustment function, making it highly versatile in any off-road adventure.. CONVENIENT QUICK-RELEASE DESIGN The flag holder bracket features a quick-release design, providing a better user experience by making it more convenient to adjust the angle of the whip light and flag. This enhances the overall passability of the UTV and addresses the hassle of frequently dismantling the whip light for users.. COMPATIBLE WITH MOST OFF-ROAD VEHICLES Our light whip mount can be compatible with Can-Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, UTV Polaris YAMAHA, 4x4's, etc. Roll bar mount fits bars with 1.75 to 2 diameters and is stable and durable..

Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us Our light bar clamp mount isnt just another accessoryits a game-changer for your off-road experience. Designed with riders in mind, it combines durability, flexibility, and ease of use. Whether youre tackling rocky trails or cruising through the desert, this mount keeps your light bar exactly where you need it..

Warm Prompt for Compatibility 8 Beads Fixed grooves this item does NOT fit 6 ball bearings. Not compatible with whip lights with center pin. KEMIMOTO Spring Mounting Bases are specially designed for Whip Lights, UTV ATV side-by-side offroad led whip lights. Quick easy upgrade your whip lights. DO NOT work for antennas. Upgraded Anti-Rotation Design KEMIMOTO upgraded whip spring mounting bases are designed with 8-ball special grooves, whip lights stay firmly in place even when you are rocking and rolling down the trail. Compatible with utv atv whip lights that have an 8-ball bearing design. Easy installation Unlike other spring bases, KEMIMOTO whip spring bases don't need to rotate whip lights to fasten the spring base. Simply remove the original bases of whip lights and replace them with the upgraded KEMIMOTO spring base right away Quick installation in one second. View the video to confirm the compatibility of your whip light with the KEMIMOTO spring bases. Protect Whip Light Adds extra flex to your utv whip lights. It will help save your whip in the wind from being damaged from its bending let the spring bend, not the whip itself. they seem very stiff, but they do bend very easily with the whips in place. Especially in high winds or driving in the jungle. Heavy-Duty KEMIMOTO Spring Bases are made of heavy-duty Spring Steel with Solid Black Powder Coating. The washers and nuts are 304 Stainless Steel which means the bases are anti-rust, corrosion, and scratch-resistant. What You Get Every spring base comes with one spring washer, one flat washer, and one nut.

Wide Compatibility- This UTV Pro-fit roll cage whip light mount is widely compatible with all UTVs with Pro fit Cage. Fits Polaris General, fits Ranger, fits Can-Am Defender, fits Commander and Maverick SportTrail, fits CFMOTO UFORCE 6008009501000, fits Kawasaki RidgeCrew, etc.. Versatility- The whip light mount can provide 12 diameter mounting holes on the roll cage for aftermarket antennas or whip lights, cargo lights, marker lights, reverse lights, third brake lights, strobe lights, pod lights and other auxiliary lights.. 360Adjustment Design- Our UTV whip mount is designed with a 360adjustment construction, you can adjust the angle you need, allowing you to position your whip lights at just the right angle for maximum visibility and style.. Durable Stylish- Our whip light mounting brackets are made from premium material and rust-resistant process, it is built to withstand even extreme weather conditions.Also with special cutting, the appearance looks more eye-catching, more texture and layering.. Installation Package- Easy to install with its clamp-on design, directly Clamp onto the roll cage, no drilling or modifications are required. Package includes 2 x Whip Light MountPro-fit.

The light mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.. Fit on 0.87511.1251.261.375 tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail .. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights.. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 0.875 22mm, 1 25.4mm, 1.125 28.6mm, 1.26 32mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp mount have a 1.375 34.92mm diameter mounting hole when without the rubber ring insert.. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation..

1. Precision 24-Tooth 360 Rotation Upgraded from 12 to 24 micro-serrated teeth for finer 15 adjustmentslock your whip light or flag at the exact angle you need, even on uneven terrain. No more close enough compromises. 2. Heavy-Duty CNC Aluminum Anti-Loosening Bolts Machined from 6061 aircraft-grade aluminum with zinc-alloy bolts that resist stripping and over-tightening. Holds 48 LED whips through brutal off-road impacts tested on RZR Turbos Can Am X3.. 3. Universal Fit, Zero Guesswork Fits 1.75-2 roll cages on all major UTVs Polaris RZR including 2024 Turbo R 4, Ranger, Can Am Maverick X3Commander, Kawasaki Teryx, Yamaha Wolverine, Jeep Wrangler. Includes sizing guide to confirm compatibility.. 4. 5-Minute Installation All hardware includedjust hand-tighten 5 bolts. Pre-assembled clamps with internal teeth grip cages securely, even on custom setups no rattling or re-tightening needed.. 5. Scratch-Resistant Protected Delivery Anodized black finish withstands branches and debris. Ships in boxes with bubble wrap to prevent transit damage..

Die-casting Aluminium Flag Holder Benlari UTV flag mount is made of Die-casting Aluminium, offering superior strength and stability compared to standard metal mounts. The whip light mount is compatible with Polaris General Can-Am Defender Commander.. Enhanced Gear Design with 360 Adjustability The UTV whip mount features an upgraded gear-type center structure, enabling 360 rotation and precise 15-degree incremental angle adjustments. This allows easy positioning for various uses, while the load-bearing bracket clamps firmly with even force distribution, ensuring stable mounting for flags or lights.. Universal Compatibility The 13mm 0.51-inch hole diameter of the UTV whip holder is ideal for mounting LED whip lights, flags, LED light bars, LED pods, and CB antennas. It easily installs on roll cage bars measuring 1.75 to 2 inches in diameter.. Durable Coating The Light Bar Bracket features a special coating on its surface, which can resist high-temperature baking and erosion from complex weather like rain, snow, wind and frost. This further extends the bracket's service life, making it suitable for various off-road environments.. Easy to Install The package includes a mounting tool for easy installation with a direct bolt on design without any drilling required. The whip light mount features an adjustable angle simply loosen one bolt to set it to your desired position. Please verify your roll bar size before installation..

Package includes- A Pair of Black Mounting Bracket. Material- Powder coated black finished for a sleek look waterproof and long service life. Easy Install- Easy to instal without drilling holes, Install this bracket on the rear, Great for LED whips, Chase Lights, Back up lights. FITMENT- For Polaris RZR 800 2008-2014, RZR 900 2015-2020, RZR 4 XP 1000 2015-2022, RZR S 1000 2015-2021, RZR S 900 2015-2021 Models. FITMENT- For Polaris RZR XP 2015-2018, RZR XP 1000 2014-2023, RZR XP 4 2016-2018, RZR XP 4 1000 2014-2021, RZR XP 900 2011-2021 Models.

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the blue mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

The rail mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Multi-Function Mounting a flag or whip light to your UTV will make you outstanding from other riders wherever you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the flag mounts for.. Heavy Duty Aluminum Made Kemimoto UTV flag whip light are made of premium alluminum with CNC cutting perfect outlook owned the feature of scratch resistance, dustproof, corrorision resistant and not easy to fade . Flag mount is designed for durable use, which is great for all weather conditions.. More Stable Construction and 360 Degree Rotation Design UTV whip mount designed with 12 Pins so as to make it stable even riding in harsh terrain and you can adjust proper angle to Fit the Vehicle.. Easy to Attach You can finish the installation within mins due to all hardware and installation manual included, Kemimoto light mount owns directly bolt-on design without drilling or trimming. The mounting angle can be adjusted by loosing the bolts and change it to the perfect angle you want.. Wide Application Universal fits all Pro fit cage UTVs. The whip light mounting brackets will be compatible with Polaris Ranger General Can am Defender Maverick Trail Sport and Can am Commander 2021. The flag mount can be mounted on all channel-shaped bars. You can also use these pro-fit mounting brackets to hold your off-road led light bars, CB radio antennas, whip light, etc..

FitmentThe whip light mount flag brackets for your CF Moto Zforce Gen 2 UTV. Anti-vibration designOur brackets significantly reduce whip vibration and wobble, preventing your expensive LED whip lights or flags from loosening or breaking. Ensures your signals remain stable and visible on the toughest trails. Whip light mount flag bracketsSecurely mount your LED whip lights or flags to increase your vehicle's profile. Crucial for night riding, group off-roading, or dune adventures, making you more visible to others and significantly improving trail safety. High-quality materialBuilt to last with robust iron material and a corrosion-resistant black finish. Withstands the impacts of rocks, debris, and harsh weather conditions, providing reliable season-after-season performance for all your off-road adventures. Package includedGet ready to ride fast You need is included a pair of brackets and necessary bolts. Simply bolt them onto your CFMOTO's existing mounting points.

Package Included- 2 Pcs '17-'24 Can Am X3 Flag Mount Brackets. FITMENT- Whip light mounting brackets for 17-2024 Can Am Maverick X3 and X3 Max, X3 RS Turbor, X3 Max Ds Turbo RR. Durable Material- This whip flag brackets mount is made of hard metal, Strong and durable, Black coating, Resist corrosion and rust. Adjustable- Whip lights X3 Mounting Bracket has a 20 adjustable mounting angle for you to adjust the whip light to stand straight up or with a nice slant. Material- Made of solid metal, durable service Black coating finish, Consistent with your vehicle, Make it outstand in the crowd, Adjustable design, Make it meet the needs of various application scenarios.

Durability Polaris general whip mounts made from heavy-duty materials CNC machined aluminum, which provides excellent corrosion resistance and can withstand harsh off-road conditions, it can be used for all weather conditions and situations.. Easy Installation The design of utv whip light mounts polaris general allows for easy and quick installation, without the need for drilling or extensive modifications to the UTV. Directly mount it to your UTV with pro-fit or profile cage with screws.. Secure Attachment The polaris general whip light mounts designed to securely hold whip lights, flags, or antennas, preventing them from coming loose during rough rides. This is crucial for maintaining visibility and communication while off-roading.. Application Pro fit whip light mount compatible with Polaris General all models, compatible with Polaris Ranger Most Full-size Rangers 2014, compatible with Can-Am Maverick Trail, Sport, and Sport MAX and Can-Am Commander 2021. Fit for all utv with pro-fit or profile cage.. SUNPIE Service SUNPIE provides 5 years of service for this pro fit whip mount. Any issue during the warranty, please contact us or the local customer service for replacement..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Stable Sturdy Structure The whip light mount is made of solid 6061-T6 aluminum alloy, CNC machining, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1 mm, 1.6541.91 mm, 1.7544.45 mm, 1.8546.99 mm, with the rubber ring insert removed, the clamp mount diameter is 250.8 mm. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Wide Application The hole size of utv light bar mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.5, 1.65, 1.75, 1.85, 2 bull bar crash bar roof rack roll bar cage. Please Note Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. An allen wrenches is included for easy installation and removal. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Stable Sturdy Structure The whip flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1 mm, 1.6541.91 mm, 1.7544.45 mm, 1.8546.99 mm, with the rubber ring insert removed, the clamp mount diameter is 250.8 mm. Wide Application The hole size of utv light bar mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.5, 1.65, 1.75, 1.85, 2 bull bar crash bar roof rack roll bar cage. Please Note Pack of 1. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the red mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

The light mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.. Fit on 0.750.87511.1251.261.375 tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail.. The tube clamp with 10mm screw hole. Ideal for a variety of applications including light bars, LED off road lights, driving lights, antennas, whip lights and whip flags.. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 0.875 22mm, 1 25.4mm, 1.125 28.6mm, 1.26 32mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp mount have a 1.375 34.92mm diameter mounting hole when without the rubber ring insert.. Note 1.26'' rubber rings can be inserted into 0.875'' and 1'' soft rubber rings to combine rubber ring inserts of different diameters to be compatible with 0.787''20mm 0.75''19mm 0.7''18mm round rail.. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.. Pack of two..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Stable Sturdy Structure The whip light mount is made of solid 6061-T6 aluminum alloy, CNC machined, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1mm1.6541.91mm1.7544.45mm1.8546.99mm, with the rubber ring insert removed, the clamp mount diameter is 250.8mm. Wide Application The hole size of utv light bar mount is 0.512.7mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.51.651.751.852 bull bar crash bar roof rack roll bar cage. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

FIT FOR CAN AM X3The 2PCS stainless steel x3 whip light mount easily installs on 1.75inch to 2inch X3 roll cage bars. Its 13mm 0.51 mounting hole is ideal for LED whip lights, flags, LED light bars, LED pods, and CB antennas. NOTEPlease verify your roll bar size before installation.. HEAVY DUTY STAINLESS STEELThe UTV whip light mount is constructed from heavy-duty stainless steel, offering greater hardness and tensile strength than aluminum. Engineered to withstand the significant elastic force produced by a shaking LED whip light, it resists breakage and fatigue. Its stainless steel build makes it suitable for all outdoor and weather conditions, providing excellent corrosion resistance for maximum durability.. 15 DEGREE ADJUSTABLE GEARThe UTV light bar mount bracket features an upgraded gear-type core with 15-degree adjustment grids for precise angle changes. Its load-bearing clamp secures firmly and distributes force evenly, ensuring a rock-solid mount for your flag or light.. 360 FLEXIBLE STABLE ROTATIONThe x3 flag light mounts offer 360 of rotation for flexible adjustment, featuring a gear-type structure that allows easy repositioning to suit any need, making them a versatile off-road accessory.. QUICK INSTALLATIONThe X3 Whip Light Mount 2PCS kit includes a mounting tool for direct bolt-on installationno drilling needed. The whip light mount itself is angle-adjustable simply loosen a single bolt to set your desired position..

1 SECURE ANTI-SLIP GRIP ON 78 to 1-18 BAR. 12-tooth interlocking clamp design locks onto tubular bars ranging from 78 to 1-18 22mm-29mm without slipping or rotating under vibration. Unlike friction-only mounts, the toothed interface eliminates the weak-point that causes whip droop on rough trails. Includes shim inserts for a snug fit on smaller diameter handlebars and roll cage bars.. 2 CNC-MACHINED 6061 ALUMINUM CONSTRUCTION Each mount is precision-cut from a solid billet of aircraft-grade 6061 aluminum not cast or stamped metal that fatigues and cracks. The black anodizing finish resists corrosion from mud, snow, and salt exposure season after season.. 3 360 ROTATION WITH 12 INDEXED POSITIONS 12 locking pins spaced 30 apart let you dial in the exact angle for your whip light, flag pole, or chase light no re-tightening. Once set, the pin-lock mechanism holds position even through whoops, rock gardens, and high-speed desert runs. Rotate between vertical trail riding and a laid-back dune profile in minites.. 4 BOLT-ON INSTALL IN UNDER 15 MINUTES Everything you need comes in the box two mounts, stainless steel hardware, and hex wrenches. Clamp onto any exposed bar section, tighten the two bolts, and you are done. No drilling, no welding, no removal of existing accessories. Detailed installation card with photos included for first-time ATV owners.. 5 COMPATIBILITY CHECK MEASURE BEFORE YOU ORDER These mounts fit round tubular bars between 78 and 1-18 outside diameter. Measure your bar with a caliper or wrap a tape measure around the bar and divide by 3.14. Compatible with Polaris RZR, Yamaha, Honda, Can-Am, Kawasaki, and most ATVUTV models using standard-diameter handlebars or cage bars. NOT compatible with oval or square-profile bars or bars over 1-14 diameter. Questions about your specific model Message us with your bar measurement and we will confirm fitment within 12 hours..

Specialized Vehicle Design Designed specifically for 2016 3rd Gen Toyota Tacoma. Ensure compatibility with your vehicle before purchasing to guarantee a perfect fit. Multi-purpose Design Versatile design allows you to mount a rear-facing LED pod, CB antenna, for GoPro camera, whip flag, or any other accessory, maximizing the utility of your tailgate space. Durable Construction Crafted from high-quality steel and finished with a black powder coat to resist rust and corrosion, ensuring long-lasting performance and reliability. Simple Installation No drilling required This mounting bracket bolts directly onto your truck using factory bolts, making installation quick and easy. What You Get 1x heavy-duty pod light mounting bracket, Driver's or passenger's side available. ready to enhance your Tacoma's functionality and style..

Sturdy bracket Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks. Wide application Can be used on tubes of 1, 1-12, 1-34 2 In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 2Pcs LED light bar mounting bracket. 2 Years Warranty Honored by Nilight..

360 dgree adjustmentWe adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off. Premium QualityPrecision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket. For Pro-Fit Cage OnlyThe whip light mounting brackets will be compatible with Polaris Ranger General Can am Defender Maverick Trail Sport and Can am Commander 2021, you can choose to install the UTV flag mount in a rear or front pro-fit cage. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want. Multiple ApplicationThe hole diameter size of the mounting bracket is 12.5mm0.5 inch. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc.

Stable Sturdy Structure The atv flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the whip mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the atv whip mount in place has two pressure washers, making the whip flag mount more secure and firmly fastened to the roll bar. An allen wrench is included for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of non-slip TPU rubber ring inserts in 0.87522.2 mm, 125.4 mm, 1.12528.6 mm, 1.2632 mm, when the rubber ring insert is removed the whip light mount diameter is 1.37534.9 mm. 360 Flexible Rotation The whip flag mount can be rotated 360, and can be adjusted flexibly to any angle you want to install the flag or whip light. Wide Application The hole size of atv whip mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The atv light bar mount can easily mount on 0.875, 1, 1.125, 1.26, 1.375 tubular bars handlebars bumper roll bar cage for atvs motorcycles utvs or other off-road vehicles. Combination of Different Sizes By inserting 0.875 and 1 soft rubber rings into 1.26 rubber rings, combining them to get more new sizes of rubber ring inserts, which are compatible with 0.78720 mm, 0.7519 mm, 0.718 mm roll bars. Please Note Pack of 1. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Stable Sturdy Structure The utv flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the whip mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of TPU soft rubber ring inserts 1.538.1 mm, 1.7544.45 mm, 1.8546.99 mm, 250.8 mm, when the rubber ring insert is removed the whip mount diameter is 2.153.34 mm. 360 Flexible Rotation The whip flag mount can be rotated 360, and can be adjusted flexibly to any angle you want to install the flag or whip light. Wide Application The hole size of atv whip mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The utv whip flag holder can easily mount on 1.5, 1.75, 1.85, 2, 2.1 bull bar bumper roof rack tubular bar roll bar cage. Please Note Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Fitment Compatible with Can am Maverick X3 2017-2021, direct mounts on rear pillar with stock bolts, no modification required. Multipurpose Can be widely used for radio antenna mounts, lighted whips, Go Pro, Fiberglass whips, led pod light mounts. Hole size for Can am X3 Whip Mounts is 12.3mm 0.48inch in diameter. Solid Built Well constructed with 3MM sturdy steel and painted with quality finishes, no corrosion, no vibration for durable use. Adjustable Use 30adjustable mounting angle for the flag antenna rear mounts, can be installed either inside or outside of the roll cage with the whip mount tab up or down. Package Include 1 pair of rear pillar flag antenna mounting brackets left and right. 2 Years Warranty Honored by Nilight..

WORK WITH 4 ELECTRICAL BOXDesigned to fit standard 4 electrical box with small and medium size wall lights, close to ceiling lights, and pendants. NOT strong enough for heavy fixtures like chandeliers, ceiling fans or ceiling fan lights.. 180 ADJUSTABLE ANGLEThe flexibility allows you to customize the position and alignment of your light fixture for the perfect lighting setup.. EASY INSTALLATIONEach pack includes all necessary screws and decorative nuts for a hassle-free installation process.. STABLE AND SECUREThe high-quality mounting plates provide a sturdy base, preventing any wobbling or shaking of your light fixture.. DURABLE AND RELIABLEMade from durable materials, these mounting brackets are built to last and withstand regular use.. PACKAGE INCLUDES2 x mounting crossbars 4 x screws 2 x ground screws 3 x wiring nuts, 4 x black acorn cap nuts, 4 x black washer..

Heavy-Duty Whip Mount Tavaray whip light mounts are made from premium aluminum alloy for superior strength and impact resistance. More durable than standard metal or steel, with a protective coating that resists heat, corrosion, and rust for long-lasting performance in any off-road conditions.. Flexible 360 Rotation Our UTV whip mount features a unique 360 adjustable gear-tooth design for quick, precise angle adjustments. This light bar mount offers smooth, flexible movement. Unlike ordinary pinhole mounts that wear out, rust, break easily with complicated hole patterns.. Universal Compatibility Comes with wider spacers for secure mounting on 1.65-2 roll bars. This roll cage mount fits most off-road vehicles including Can-Am Maverick X3, Polaris RZR XP 1000900, Yamaha, Sand Rails, Buggies, Commander, 4x4s, and more.. Multiple Application The whip light mounting bracket has a 0.5-inch mounting hole, combined with 3 non-slip rubber pads, firmly holds whip lights, flagpoles, spotlights, chase lights, antennas, light bars and other application equipments even on the roughest terrain.. Easy Installation No drilling or special tools required. The dual-bolt clamp design with locking nuts allows fast and easy to install. Simply loosen the bolt to adjust the mounting angle to your preference. All hardware is included for a quick, secure setup right out of the box..

1. WIDER FIT RANGE 1.75 TO 2.25 INCH BARS These extended-fit mounts accommodate thicker roll cages that standard brackets cannot handle. Compatible with 1.75, 2.0, and 2.25 diameter tubes on Jeep JLJT sport bars, Ford RaptorTacoma roof racks, Polaris RZR XP roll cages, and Can-Am Defender bars. A Upgrade if your vehicle has oversized tubing.. 2. 20 LOCKING POSITIONS WITH 18 INCREMENTS Get laser-precise aiming with twice the adjustment resolution of standard mounts 20 positions vs. typical 12. Each click locks firmly into place so your lights stay pointed exactly where you set them no drifting on bumpy trails. Ideal for ditch lights, camp lighting, and precision work illumination.. 3. 30 THICKER ALUMINUM CNC-machined from 6061 aluminum that is 30 thicker. The 3-bolt clamp design eliminates wobble at speed, while interlocking teeth prevent rotation under impact. Rated for LED light bars, cube pods, and work lights up to 50 lbs combined weight.. 4.TOOL-FREE SETUP IN MINUTES Includes hex wrench for bolt-tightening right out of the box. No drilling required for most installations on standard roll bars. 10mm dia hole for light mounting. For custom or oversized light bases, minor hole enlargement may be needed check your light mounting footprint against the bracket bolt pattern before purchase. Works with Baja Designs, KC Hilites, Rough Country, and most major LED brands.. 5. ENGINEERED FOR YEAR-ROUND OFF-ROAD USE Black anodized finish resists scratches, chips, and corrosion from salt, mud, and harsh UV. Backed by ZIDIYORUO's commitment to quality UTV accessories. Join thousands of riders who trust our mounts for their daily driver and weekend warrior builds alike..

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road. High Compatibility Can be used on the hood or roof to mount any side-mounted light bars, straight or curved, single row, double row, triple row, or quad row. All works well and still remain ample room to adjust the mounting angle of the light. Dual Mounting Functions Directions Can be used as a whole to mount side-mounted light, or remove L shape bracket, just use the magnetic base to mount bottom-mounted light. For the L shape bracket, you can also choose to mount them inward or outward. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please check the 9th picture on the left. Package Include 2 x magnetic mounting brackets with sucker base.

360 dgree adjustmentWe adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off.. Premium QualityPrecision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket.. Fit SizeSpecially designed for flag antenna whip mounts on all UTVs with 1.5 to 1.75 and 1.75 to 2 Round Roll Cages, such as Polaris RZR, Ranger, Can-Am Maverick X3, Commander, Yamaha, Kawasaki, Honda Talon Pioneer, ect.. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want.. Multiple ApplicationThe hole diameter size of the mounting bracket is 12.5mm0.5. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc. 2 Years Warranty Honored by Nilight..

Fits Modle Fits screw with Min diameter of 0.448 and Max diameter of 0.465, suitable for LED whip, fiberglass CB antenna, center load antenna, whip lights, ect. ATTENTION If you are looking to upgrade your whip lights purchased at Nilight, then please note that this spring mount will only fit NON-SPRING Mount models.. Hight Strength and Durable Made of high-strength carbon steel, durable, shockproof and not easy to deform. Covered with thickened black powder coated, equipped with stainless steel nuts, washers, etc., waterproof and dustproof, not easy to rust, smooth surface, easy to clean.. Flexible and Protective The design of the spring structure can effectively protect your whip lights or antennas from being easily broken when encountering such as low branches, tunnels, eaves, and strong winds, and disperse the huge and concentrated impact force through flexible bending.. Wide Application Compatible with most vehicles, as long as there are a 0.47 hole in the vehicle or bracket for the screws M1230 thread on the bottom of the base to mount, such as UTV, ATV, Truck, compatible with Can-am, go-kart, golf cart, dune buggy, sand rail, ambulance, pilot car, etc. Atten please confirm the size before order. Package Include 1 Spring Base, 1 stainless steel nut, 2 stainless steel washers. Easy to install, can be finished within 10mins.

The rail bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roll bars, roof racks, roll cages, bull bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation. Color Red, Quantity 2 PCS.

Upgraded Anti-Rotation Design Tavaray whip light spring base is built for whip lights with an 8-groove locking base, delivering a secure hold that won't twist or loosen. Anti-rotation grooves keep your LED whips upright and secure on any terrain. NOT for 6-ball bearing or center-pin mounts.. Heavy-duty Spring Base Crafted from durable aluminum alloy for strength, corrosion resistance, and long-term use. Built to handle mud, rain, harsh outdoor conditions, and high speed vibration without cracking or bending over time.. Easy to Install No tools or modifications needed. This UTV whip lights spring mounting base features a quick-release design makes attaching or removing your whips in seconds. Perfect for trail riders who value convenience and flexibility on the go.. Shock-Absorbing Spring The built-in barrel spring absorbs shocks and reduces vibrations on rocky trails and bumpy roads. Keeps your whip lights protected from bending or breaking during aggressive off-road riding.. Universal Fitment This LED whip light spring base fits any UTV, ATV, SXS, or off-road vehicle with a 0.450.47 inch mounting hole or M12 threaded bracket. Great for Polaris RZR, Can-Am Maverick X3, dune buggies, golf carts, and more. Note Not suitable for antennas..

Heavy-Duty Whips Mount Xprite whip light mounts made from CNC-machined aluminummore durable than metal or steel, and capable of handling the fat LED whips for superior strength and shock resistance. Our whip light brackets coated surface resists heat, corrosion, and rust, ensuring durability in any off-road environment.. 360 Adjustable The utv whip light mount is designed with a precision gear teeth, allows for 10-360 of flexible and stable angle adjustment for different mounting angles. This atv flag mount has a vibration-resistant design ensures a secure hold, even on rough terrain.. Universal Compatibility The utv flag mount fits roll bars ranging from 1.75 to 2 in diameter. Come with three non-slip rubber pads for a firm grip. Compatible with ATV, UTV, SXS, RZR, Polaris RZR 1000 XP, Can-Am Maverick X3, Jeeps and more.. Multi-Purpose Mounting With a 12mm mounting holes, this roll bar light mount is works for securely mounting whip lights, antennas, flags, chase lights, work lights, off-road lights, light whips for side by side, and LED light bars on roll bars, bumpers, or roof racks.. Quick Easy Installation No drilling or modifications needed This direct bolt-on whip light mounting bracket comes fully assembled, clamps down and is ready to use. Comes with all the necessary hardware for a quick installation..

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, head racks, roll bars, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Wide Adjustment Range The light mount brackets are equipped with a 8mm hole, compatible with a variety of light bars or led lights and provides a 48mm range of adjustment, allowing you to flexibly adjust the installation position of light bar. Solid and Durable Material The utv light bar mount is constructed from sturdy 6061-T6 aluminum alloy, CNC machined, the light bar clamp is finished with III grade hard anodized surface. Sturdy and durable, resistant to oxidation and weathering. Single Bolt Hinge Design Simple to install with only 1 screw to hold it in place. The screw that secures the light bar mounting brackets have 2 pressure washers for a stronger hold on the roll cage. Tool comes with two allen wrenches for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of TPU soft rubber ring inserts 1.538.1mm1.7544.45mm1.8546.99mm250.8mm, when the rubber ring insert is removed the roll bar mounts diameter is 2.153.34mm. Universal Compatibility The light bar mounting brackets can be widely used for 1.51.751.8522.1 diameter bull bar, roof rack, grille guard, tubular bar, roll bar or any diameter round tubes on ATVs, UTVs, boats, jeeps, trucks, off-road vehicles and etc.. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Nondestructive Installation - With these led hood light mounts, you can add more lights on your machine without drilling or modification.. Durable Construction - The whole led hood light bracket is made of 304 high-quality stainless steel, with black paint on the surface, pod light mounts does not fade and scratch easily, making your car look attractive.. Anti-scratch Rubber - The part of the led light mounts in contact with the surface of your car paint are wrapped in rubber, which is non-slip and protects your car paint from scratches.. Adjustable Brackets - These unversal ditch light brackets can be adjust up and down 180 degree, left and right 60 degree, in order to find a best angle for you.. Universal Application - Our pod light mounts can be mounted to bumper, hood or any other flat surface with thickness less than 8mm, apply to trucks, van, sedan, pickups, SUV, etc.. 10mm Hole - 10mm mounting hole can meet the installation of most led lights in the market, NORTHYUN hood mount light brackets compatible with most LED light pods, led work lights, led light bar, fog lights, driving lights, etc..

The whip light mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 0.87511.1251.261.375 tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail . The whip flag mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 0.875 22mm, 1 25.4mm, 1.125 28.6mm, 1.26 32mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp mount have a 1.375 34.92mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. 360 degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the blue mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

High-quality Material Side Pillar Mounting Brackets made of high-quality metal, the surface is black powder coating, solid and waterproof. Long service life. Wide Compatible It compatible with 12W18W20W27W45W48W LED pod, can be used with most round or square LED lights. Fitments 2014-2019 POLARIS RZR XP 1000 2015-2019 POLARIS RZR 900. Please check the fitment. Easy to Install Pre-Drilled Holes, no modification or drilling required, the installation bracket ensures secure fixed on the LED light to your vehicle. Package Includes 2PCS Side Pillar Mounting Bracket. Packaging may vary.

High Quality Premium stainless steel material mounting bracket is free from rust and corrosion, sturdy bracket can hold the light bar firmly. Anti-vibration when travelling through rough terrain. Adjustable Bracket The max adjustable angle of the mounting bracket was 180 degree. Allow you to change the direction of light beam, lighting every corner. Easy to Install Mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down and shaking. Wide Application Fit for round and square 4.5 inch 27W 42W LED light bar, suitable for most types of cars, off-road. Jeeps, trucks, 4x4s, SUVs, ATVs, UTVs, agriculture, tractors, etc.. Package Included 2pcs base mounting brackets, screws and bolts.

Durable Material Made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather. Free Adjustability Youre able to freely adjust 180up and down and 60left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle. No Drilling Anti-slip Design No drilling is required, just clamp the kit and tighten up. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood. High Compatibility Can used to mount different thickness of work lights, fog lights, driving lights etc. As only the max limit of the clamp board thickness on the vehicle is within 8mm. Package Include 2 x 304 stainless steel brackets Lamp is not included., 2 x hex Allen wrench. Can used to mount different thicknesses of work lights, fog lights, driving lights, etc.

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. An allen wrenches is included for easy installation and removal. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1 mm, 1.6541.91 mm, 1.7544.45 mm, 1.8546.99 mm, with the rubber ring insert removed, the clamp mount diameter is 250.8 mm. Stable Sturdy Structure The whip flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Wide Application The hole size of utv light bar mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.5, 1.65, 1.75, 1.85, 2 bull bar crash bar roof rack roll bar cage. Please Note Pack of 1. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Sturdy bracket strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. wide application can be used on tubes of 1 inch, 1-12 inch, 1-34 inch 2 inch diameter and applied to led light bar for almost all kinds of vehicle. Easy installation pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 4 PCs led light bar mounting bracket.

Fits SizeCan be used on tubes from 2.87inch to 3.2inch, the holes for mount lights is perfect for whip lights with M12 or 12 screws, also suitable for screws with a MIN diameter of M8 needs washers for firm installation.. Premium QualityPrecision-welded from cast heavy duty 6063 aluminum with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket.. Anti-Slip ProtectionThe internal sides are designed with anti-slip tooth, which can firmly grip the mount, making the bracket hold the whip lights or light bar firmly, meanwhile avoid your lights from being damaged, comes with the rubber inserts dempen, help dampen vibrations during off-roading and protect your bull bar from being scraped.. Wide ApplicationThis Mounting Clamp Set is perfect for creating unique mounting points on bumper bars, ATV, UTV, RV, truck, boats, tractor, quads, motorcycl, 4x4 offroad, farm vehicles, and roof racks, test tubes, anti-collision Rod, roll cage etc. Can work with most whip lights, Work Lights, Fog Lights, Driving Light, LED Light Bar.. Easy installationTube bracket clamps is easy and direct installation, no drilling or welding required, and it is not damage to the vehicle surface. Achieve adding more lights to the vehicle without drilling holes. 2 Years Warranty Honored by Nilight..

Multipurpose Off-Road Compatibility - Designed for 1.75-2 roll bars, this UTV light mount bracket fits UTVs, ATVs, trucks, boats, motorcycles, and farm vehicles. Compatible with popular models like Polaris RZR, Can-Am Maverick X3, Yamaha, and more. Clamp it on and mount your lights to tackle any adventure.. Universal Fit with Versatile Mounting - Featuring a 10mm installation hole and equipped with M6 and M8 rubber nut inserts, this mount supports various accessories. Perfect for LED light bars, driving lights, work lights, antennas, and more. Compatible with M6, M8, and M10 applications for complete flexibility in mounting options.. Heavy-Duty Aluminium Alloy Construction - Crafted from premium 6063 aluminium alloy with precision CNC cutting and a black powder-coated finish, this mount offers outstanding durability. The internal tooth design ensures a tight grip on roll cages, providing long-lasting performance in even the harshest off-road conditions.. 360 Adjustable Rotation for Flexibility - The 360 rotating design with a toothed meshing structure lets you precisely position lights. The anti-shock design maintains your desired angle even on rough terrain. Adjust and secure your accessories easily for optimal visibility during off-road rides.. Quick and Hassle-Free Installation - Installation is a breeze with the included hardware and Allen key. Designed for 1.75-2 roll bars, this mount securely attaches without the need for drilling or modifications. The package includes two black UTV light mounts, ensuring a fast, secure setup for any terrain..

1. Optimal Lighting Positioning - Off-Road Light Bar Mount and Cube Light Bar Mounts feature a 360 angle rotation for customized Motorcycle and ATVs lighting angles to meet all your off-road needs. Fits 0.75-1.5 bars. 2. Rock-Solid Stability - Hang tough on even the roughest rides with our durable mount designed to secure a variety of lighting options.. 3. Easy Installation - This motorcyle ATVs Bars Size compatible mount includes an Allen key to make your installation process a snap. 4. Built to Last - Constructed with 6063 aluminum alloy materials, our LED Light Bar Bracket was built to withstand tough off-road conditions and provide long-lasting use.. 5. Perfect Fit - Ideal for use with motorcycle ATV and other bars sized from 0.75-1.5, our secure mount option will effortlessly hold your light bar in place, no matter where your adventure takes you.

BRACKET APPLICATION LED light bar mounting bracket is designed for Pro-Fit Cag, for Polaris General Ranger Can-Am Defender Commander Maverick Sport Trail. NOTICE NOT FOR ROUND-FIT CAGE. MOUNT HOLE APPLICATION UTV light bar mount measures 0.47 inches in diameter, please check the dimensions of your flagpole, light bar, antenna, etc. 360 ADJUSTABLE TEETH DESIGN For Polaris Ranger whip flag mount adopts a teeth design, you can loosen the screw to adjust the angle, stronger, more durable, and more flexible to rotate the equipment. HEAVY-DUTY ALUMINUM ALLOY UTV whip light mount is made of high-quality aluminum alloy, rust-proof, sturdy, and durable exquisite workmanship makes it fit the product and is easy to use. EASY TO INSTALL UTV light bar mount is easy to install, no drilling required, no glue required, installation tools are provided, quick to install. WHAT YOU GET 1 Pack light bar mount for UTV Polaris Ranger General Can-Am Defender Commander Maverick with Pro-Fit Cage.

High QualitySide Mounting Bracket is made of black aluminum material, anti- rust and anti-corrosion, weather-proof, sturdy,Nicely powder coat black finish,great quake proof ability,raise the light bar height to help to avoid car paint damage.. AdjustableFirmly hold the slide mounting bracket on the LED light bar use necessary hardware on the place that you want to install , such as bull bar, grille guard tube, roof racks, etc. Allow you to adjust the viewing angle freely with 360 degree rotating to ensure maximum visibility.. PackageYou will get A pair of side mounting side brackets and A pair of rubber pad, Easy installation with tools and accessories, Comes with all the necessary mounting hardware as nuts, bolts, washers, allen wrenches and some necessary accessories to install these brackets.. InstallationLED light bar mounting bracket,apply to most slide mounting bracket straight or curved LED light bar from 7 inch up to 52 inch, 18W, 36W, 72W, 108W, 120W, 180W,etc.Improve air flow for better heat elimination.. Customer ServicePlease contact us through your order firstly for any problems,attach some pictures so that we can confirm the issue and do solution at first time.Heartfelt customer service 365 Days Money Back Service 24 hours online heartfelt service..

Specifications Color Silver Material Galvanized Carbon Steel Overall Size 120 x 100 x 15mm 4.72 x 3.94 x 0.59 inches LWH Board Thickness 1.5mm 0.06 inches Ground Wire Length 150mm 5.9 inches Packing List 1 x Ceiling Light Plates Including Screws, Wiring Caps, Ground Wires. Advantages Made of thicker galvanized steel, cut and polished, sturdy and durable, not easy to fall off, will not deform, and can support the installation of ceiling lamps weighing up to 22 pounds The surface of the carbon steel material is galvanized, anti-oxidation anti-rust, and durable Contains ground wire and a green ground screw, which can be used for quick grounding to more comprehensively protect your electrical and home safety.. Application This lamp mounting bracket kit is designed for various types of lighting fixtures. It works perfectly with the ceiling light plate cover, making installation a breeze. It can be used with most wall lamps, ceiling lamps, chandeliers, corridor lights, outdoor lamps, pendant lights, etc. It is very suitable for use in many scenes such as home, office, store, etc.. Instructions The package contains screws and installation accessories, which are easy to install. You only need to use a household screwdriver to easily complete the installation of the lamp, saving you time and energy.. Note 1. Please disconnect the power supply before installing the lamp. 2. Please confirm the required size before purchasing. 3. Not suitable for ceiling fan installation..

Compatible with The Brackets fit for 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 Polaris Ranger full-size body and Ranger 570 800 900 900 XP 1000 XP 1000 Crew XP 1000 for more specific vehicle models, please refer to the details page. No Drill Very easy to install. Just directly install it on both sides factory bolt holes of the rear roof, and use factory screws, no need to drill or cut. Excellent quality Made of thickened solid iron alloy, durable, CNC formed and pressed, precise size, smooth edges, electrophoresis process, covered with thickened black matte powder, durable and non-fading and not easy to scratch for long service life. Wide Applications With various uses, not limited to rear lights, backup lights, whip lights, but also suit rear view cameras, whips, antennas, etc. Package Include 2pcs mounting brackets, a pack of spare hardware.

FIT FOR JL - CB antenna mount fits for Jeep JL Wrangler 2-door JL Wrangler Unlimited 4-door 2018-2022. DURABLE CONSTRUCTION - JL CB antenna mount are made of high quality steel, with black powder coated finish for rust corrosion resistance.. NO DRILLING - CB antenna mounts directly mounted on your JL tailgate hinge, just easy bolt-on installation, comes with rubber pad to prevent your car paint from scratching.. MULTI PURPOSE - JL CB antenna mount comes with 2 mounting hole, you can mount a CB antenna and a flag or whip light at the same time.. WHATS INCLUDED - 1 tailgate hinge CB antenna mount, 1 mounting kit..

FitmentThe Polaris Mount bracket fits for Polaris Ranger RANGER 570800900900 XP1000XP 1000Crew XP 1000. 2013 2014 2015 2016 2017 2018 2019 2020 full size body. MaterialThis Polaris rear roof light bar brackets are made with laser and CNC formed, with black powder coated finish, which is solid and durable, rust-resisting,long service life. FunctionThe Mounting Brackets works with led pod lights, install it on the Polaris ranger rear, and you can add 2 backup light pods. Easy InstallThe light pods mounting brackets match with exit factory points, no drilling or cutting required. Package Include2 rear roof roll cage bar mount bracket, 4 screws, 4 nuts, 4 washers.

Applicable Model Thespring mounting base is for Polaris UTV ATV, compatible with a wide range of vehicles, giving you the flexibility to customize and enhance different rides.. Spring Base for Flexibility Built with a spring base, these whip lights offer flexibility and durability, allowing them to withstand rough terrains and off-road conditions while minimizing the risk of breakage.. Material The spring base mount is made of and material, high strength, resisting , shaking, fracture and wear. Enjoy long-lasting performance and reliability, even in challenging outdoor environments.. Convenient Replacement The base mounting mount can be quickly released and directly replace the old and broken spring mount, ensuring the normal of the whip light.. Easy to Install The spring base mounting mount has a simple installation, convenient and time saving, don't need too much tools or complicated steps..

Sold as a Pair 2 per Purchase. Aluminum Alloy That will Never Rust. Each Clamp comes with one thick and one thin silicone shim. Use a combination of shim to find the best fit. Note Gasket Trimming and Stacking can allow fitment of a wider range tubes. Mount hole can be easily enlarged by drilling. Drilled location will also never rust. Will fit Tubes with Outer Diameter between 0.95 to 1.2 inch see sizing chart.

Durable Aluminium Alloy MountZidiyoruo UTV Flags Bracket or Whips Mount is made of heavy-duty solid aluminium alloy,It is heavy than standard metal or steel. It won't be out of shape even handle the largest LED whips.. Feature Teeth Inside, Stable Flag and light whip HolderIf you look at many whip amount or UTV flag holder, you'll find that the Zidiyoruo flag mount or flag holder is Special among all flag brakets or LED whips mounts. Because it has teeth inside to hold the bar or roll cage tightly.. 360 Rotation Flag Holder BracketThe flag bracket can revolve 360, make the bracket more flexible.. Universal FitmentThis light whip mount typically used for off-road vehicles such as Can Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, ATVUTV Polaris YAMAHA, 4x4's, Jeeps,etc Where there is a bar at 1.75 to 2 , there is a flag and let whip go upstraight. No difference to install the flag and whip on left or right. Stable and Durable.. Easy InstallationOne package delivery, all hardware included. 5 screws to install it. Once intall it tightly, the whip mount or flag holder will cake your flag and whip to any terrain and maintain a good performance. 1. Universal Fits to Roll Bar from 1.75 to 2 Diameter. Please Must Check Your Car Before Making The Final Decision..

Package ContentsEach package includes 4 universal light fixture mounting bracket, 4 38-inch 18IP light tubes 40 mm in length, 4 lock nuts, and 4 anchor bolts. Fully equipped, mounting brackets are ideal for upgrading existing equipment or installing new equipment to meet various lighting layout requirements.. High-Quality MaterialsMade from high-quality zinc alloy, these light mounting bracket are designed for long-term use. Their sturdy construction ensures that lighting fixtures are securely in place, providing sturdy and reliable support.. Universal CompatibilityThese mounting brackets are designed to be compatible with a variety of lighting fixtures, including pendant lights, wall sconces, and recessed wall lights. The flexible design of ceiling fan bracket mount kit can seamlessly adapt to various application scenarios, making them an ideal choice for any lighting project.. Easy InstallationThe ceiling light mounting bracket set includes all necessary hardware, making the installation process simple and quick. Whether you are a professional or a DIY enthusiast, you can complete the installation quickly, saving time and effort.. Stylish DesignThe silver finish of the mounting brackets not only enhances durability but also gives lighting fixtures a modern and elegant visual appeal. Their stylish design seamlessly integrates with most decor styles, enhancing the overall aesthetic of the space..

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roll bars, roof racks, roll cages, bull bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation. Color Blue, Quantity 2 PCS.

Protect your whip lightsThe design of the whip lights spring structure can effectively protect your whip lights or antennas from being easily broken when encountering such as low branches, tunnels, eaves, and strong winds, and disperse the huge and concentrated impact force through flexible bending.. Easy to Install DREAMIZER whip lights spring mounting bases don't need to rotate whip lights to fasten the spring base,no need to twist the threads,just remove the original base from the bottom of the whip light and insert the whip light into the upgraded spring base right away,quick installation in one second.. Wide FitmentDREAMIZER this spring base fit for most vehicles,It can be widely compatible with ATV, UTV, Buggy,Off road,Trucks, SUV, Golf Cart, Boat,Sedan, dune buggy,ambulance, pilot car,Motorcycle,such as RZR 1000 ,Can-Am X3,YXZ1000R,Teryx,Wrangler JK,etcNote don't suitable for fat whip lights,please check the size before buying. High Quality and Durablity DREAMIZER Whip Lights Spring Mounting Base is made of heavy-duty spring steel with a sturdy black powder coated finish. high performance of anti-vibration, anti-rust, anti-corrosion, and anti-fracture.Pot-belly style barrel spring increases flexibility and durability and strengthens the middle part to avoid fracture.. Package Includes2pcs Black Whip Lights Spring Mounting Bracket Base,Accessory set,If you have any questions about the whip lights spring mounting base please contact us freely, we will feedback you within 24 hours..

1.Innovative Design Featuring a novel H-shaped appearance, a bidirectional perforated structure design allowing for varied positioning of different sizes of round tubes, accommodating multiple sizes of roll bars.. 2.Sturdy Construction Crafted from high-density aluminum alloy through die-casting, the four corners tightly envelop the roll bar, providing enhanced overall load-bearing capacity, effortlessly handling heavy-duty aluminum supports on any terrain.. 3.Safety and Stability The L-shaped platform at the light bar mounting position allows for 360-degree rotation, enabling adjustment to different angles. Upgraded with double reinforced triangular structures, it enhances load-bearing capacity.. 4.Multi-Size Compatibility Compatible with round tube diameters ranging from 0.26-0.7 0.7-1.25 inches, fitting a variety of off-road vehicles, including Can Am , Polaris , YAMAHA, ATV and Motorcycle. It can be easily installed on any bar measuring 0.26-0.7 0.7-1.25 in.. 5.Versatile Applications Multiple options for ATV brackets, such as ATV Whip Mount and ATV Light Bar Mount. It can also be installed on the round bars of Motorcycle..

Aluminium DurableThis whip light mount is crafted from solid, coated Heavy-Duty aluminum alloy and designed with triangular reinforcing ribs at the corner. It is built to withstand tough conditions. 360 AdjustableEasily find the suitable position,The whip light brackets rotates a full 360 degrees with multiple locking points, allowing for precise adjustment of lights or flags. Easy Bolt-On Installation No Drlling Required, Installation is a breeze with the bolt-on design, making it quick and hassle-free. No drilling or modifications are needed, so you can mount it securely on your UTV roll bar with minimal effrt. AdaptabilityThe hole diameter size of the utv whip mount is about 12.2mm0.48inch, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm. Fitmentkemimoto utv whip mount compatible with UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar.

SMALLER SIZE - Ever have to jerry-rig your bar clamp over a smaller bar to make it fit Not anymore. The Mini Bar Clamp is designed specifically for bars with a smaller diameter ranging from .75 to 1 to 1.25. Mount your mini bar clamp on roof racks, roll cages, bull bars, handlebars, and more The mini bar clamp takes up less space than traditional bar clamps, allowing you to mount it in tighter spaces.. RUBBER TEETH - Unsatisfied with the grip of your current bar clamp The Mini Bar Clamp comes with multiple rubber teeth which allows the mini clamp to get a more secure grip and fit handlebars of different diameters. The rubber teeth also help dampen vibrations, stops the metal from being worn down and keeps your bars protected all the way through.. STURDY ALUMINUM RUBBER STRIP- The Mini Bar Clamp is built using precision-welded cast aluminum, allowing it to be both lightweight and durable, and easy to hang onto get it. For mounting onto the aluminum teeth directly, the mini bar clamp comes with an additional rubber strip to prevent the aluminum from being worn down.. NO DRILLING - Tired on drilling holes on your bar Us too. With the mini bar clamp, simply bolt it over your handlebars, and mount your light bar onto the clamp. It's that easy. Plus, the Mini Bar Clamp accessories kit comes with everything you need for installation.. YOUR PURCHASE. PROTECTED - We stand by our products. A lot. We love them so much we'd marry them if we could Sorry Jill. That's why every mini bar clamp comes with a 90-day return policy, 2-year warranty, and the best US based telephone support in the business. It's that good..

Vehicle Compatibility LED whip light mount fit for Polaris General and Ranger rear bed holes. Provides a secure mounting point for LED whip lights without drilling or welding. Heavy-Duty Steel Build Made from thick stainless steel for enhanced strength and stability. Reinforced structure withstands vibration and off-road impact, keeping the whip light firmly supported. Adjustable Positioning Extended slot design allows sliding adjustment to fit different bed rack widths. Users can easily fine-tune the mounting position for ideal alignment and whip light placement. Protective Powder Coating Black powder-coated finish offers strong resistance to rust and surface wear. Maintains a clean look while providing long-lasting durability for outdoor use. Fast Installation Easy-grip star knob handles simplify the installation process. Quick tightening reduces setup time and eliminates the need for complex tools.

Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0 75 1 1 25 It is applicable for roof racks roll cages bull bars handlebars on ATV UTV and trucks. High Compatibility Compatible with various types of light bar brackets the 10mm screw hole diameter fits all light with 8mm mounting screws. Perfect Fit Rubber Inserts Rubber insertsstrip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp Making installation easier and always protecting the metal from being worn down. Built With Quality Clamps are built using precision-welded cast sturdy aluminum makes it lightweight but pretty neat and durable. Make Light Mounting Easier With the high compatible bar clamp youll hassle, free of drilling holes in your vehicle body. Simple all in one kit makes your life easier.

360 dgree adjustment We adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off. Premium Quality Precision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket. Fit Size Specially designed for flag antenna whip mounts on all UTVs with 1.5 to 1.75 and 1.75 to 2 Round Roll Cages, such as Polaris RZR, Ranger, Can-Am Maverick X3, Commander, Yamaha, Kawasaki, Talon Pioneer, ect. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want. Multiple Application The hole diameter size of the mounting bracket is 12.5mm0.5. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc.

UTV Flag mountUTV flag mount Also know as UTV whip mount, flag mount clamp, light mounting bracket., UTV flag holder, whip light mounting bracket, UTV bar flag mount, flag pole holder, light bar mount, gives your off-road vehicle the extra touch. It is a good Practical Christmas Gift for Men Women in the special holiday season if he or she loves off-road life.. A way to mount two whips on your UTVUpgrade your Polaris General or Ranger with a set of colorful LED whip lights quickly and easily with ZIDIYORUO's UTV whip mounts, to show off your flair no matter where you travel.. 360-degree rotationZIDIYORUO UTV whip flag mount designed with 12 Pins so as to make it stable even riding in harsh terrain and you can adjust proper angle to fit the Vehicle.. Solid heavy duty aluminium alloy UTV mountsZidiyoruo is famous for UTV whip mounts because of its quality, all heavy duty Aluminum made, the UTV mounting brackets is good to hold flag whip, spots light. Easy InstallationOne package delivery, all hardware included. 3 screws to install it. Once intall it tightly, the whip mount or flag holder will take your flag and whip to any terrain and maintain a good performance..

PackageOne pcs Heavy-duty Aluminum UTV Whip Light Mount with tools and installation instruction available.. FunctionMounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the UTV whip lightflag mounts for.. FitmentKemimoto whip light mount can be mounted on a 1.5 to 2 roll bar. That is to say, it works with all UTV, such as RZR 900 1000 XP Pro, Maverick x3 Commander, Talon, Mule YXZ, KUBOTA RTV and the list goes on.. InstallationEasy installation with all hardware included, directly bolt-on design, no drilling or trimming. The mounting angle can be adjusted, you can loosen the bolt and twist it to the perfect angle you want.. MaterialHigh-quality Aluminum with CNC cut for perfect outlook. Kemimoto UTV whip light mount is designed for long-term use, great for all weather conditions..

With a beefier M1230 thread, this spring base is suitable for LED whip, fiberglass CB antenna, center load antenna, 102 whip, and so much more.. FLEXIBLE - High speeds and corners can do a number on your whips and antennas, testing them to the limit of their flexibility. A sturdy spring base can take a lot of the stress of your equipment during hard highway or off-road use.. APPLICATION - Applicable to all vehicles and boats.. STRONG AND SECURE - Great performance of shockproof, waterproof, and rustproof. High carbon steel material with the pot-belly style barrel spring increases flexibility and durability, protects your whip light from being broken.. BOX COME WITH - 2 x spring base, 2 x M12 nut, 2 x M12 spring washer, 2 x M12 flat washer. Provide 1 year quality assurance. Quickly responded within 24 hours and good after-sales service.

Easy Installation. Durable black powder coat finish. 316-inch laser cut steel. Backed by Rough Country's Lifetime Warranty.. Backed by Rough Country's Limited Lifetime Replacement Warranty..

Easy Installation.. Durable black powder coat finish.. 316-inch laser cut steel.. Backed by Rough Country's Lifetime Warranty..

FEATURESNew Mounting bracket for Xprite LED whip Lights. Includes a locking pull pin to easily collapse the whip down for storage of your UTV, ATV, Buggy, Sand Rail or off road vehicle when transported. MATERIALFull Aluminum Metal construction that help stability and strength when mounted.. FITMENT Universal for whip lights, spot lights, lightbars, etc.. EASY INSTALLATIONMounts to 1.75 to 2 Roll Bars With No Modifications Required. PACKAGE INCLUDES1x Xprite Whip Light Mounting Bracket.