FITMENT These whip light mounting brackets are compatible with Can-Am Maverick X3 Can-Am Maverick X3 MAX 2017-2024 all models, such as Can-Am Maverick X3 RS Turbor, X3 MAX Ds Turbo RR. WORK WITH VARIOUS PRODUCTS The X3 mount brackets are compatible with Radios Antenna mounts, Lighted Whips, Fiberglass whips, or anything else. DESIGN UPGRADE KEMIMOTO whip lights X3 Mounting Bracket has a 30 adjustable mounting angle for you to adjust the whip light to stand straight up or with a nice slant. And the notch cut design is for a tidy while wiring the wire. EASY INSTALLATION KEMIMOTO whip flag brackets mount on the exit holes on the right left side rear upper pillars with stock bolts. No drilling required. STURDY KEMIMOTO mount Heavy-duty material, made from 316 steel which is nice and will be very sturdy for your LED whips.

FunctionMounting a flag or whip light to your machine will give other riders notice that you are on on the track, trail, or dune.. More Sturdy Construction kemimoto mount different inner shape makes the construction more stable. Prevent hole wear problems caused by long-term use of screws.. Easy to InstallEasy to install with the mounting tool, directly bolt-on design, no drilling or trimming. kemimoto whip light mounting angle can be adjusted, you can only loosen one bolt and change it to the perfect angle you want.. AdaptabilityThe hole diameter size of the utv whip mount is about 12.2mm0.48inch, that is to say, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm.. Fitmentkemimoto utv whip mount compatible with all UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar..

UTV Flag mountUTV flag mount Also know as UTV whip mount, flag mount clamp, light mounting bracket., UTV flag holder, whip light mounting bracket, UTV bar flag mount, flag pole holder, light bar mount, gives your off-road vehicle the extra touch. It is a good Practical Christmas Gift for Men Women in the special holiday season if he or she loves off-road life.. Feature Teeth Inside, Stable Flag and light whip HolderIf you look at many whip amount or UTV flag holder, you'll find that the Zidiyoruo flag mount or flag holder is Special among all flag brakets or LED whips mounts. Because it has teeth inside to hold the bar or roll cage tightly.. 360 Rotation Flag Holder BracketThe ZIDIYORUO UTV flag bracket can revolve 360, make the bracket more flexible.. Universal FitmentThis light whip mount typically used for off-road vehicles such as Can Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxSUTV Polaris YAMAHA, 4x4's, Jeeps,etc Where there is a bar at 1.75 to 2 , there is a flag and let whip go up straight. No difference to install the flag and whip on left or right. Stable and Durable.. Easy InstallationOne package delivery, all hardware included. 5 screws to install it. Once intall it tightly, the whip mount or flag holder will cake your flag and whip to any terrain and maintain a good performance. 1. Universal Fits to Roll Bar from 1.75 to 2 Diameter. Please Must Check Your Car Before Making The Final Decision..

Professional Light Bar Mount Securely install LED whip light, light bars, chase lights, or off-road flags on 1.75-2 UTV roll cages. The aluminum alloy bracket with locking teeth prevents wobbling, even on rocky trails.. Zero-Slip Grip Technology Inner locking teeth bite into roll cages no drilling, ensuring rigid hold for light bars and whip flags. Tested to withstand 60 MPH vibrations.. 360 Full-Angle Adjustment Rotate light bars or flags to 12 positions 30 increments for optimal beam direction or flag visibility. Perfect for night trails or desert racing.. Universal UTVRZR Compatibility Fits Polaris RZR, Can-Am Maverick X3, Yamaha YXZ most 1.75-2 cages. Works with UTV Whip light bars up to 4.5 lbs. Quick-Install Weatherproof Set up in 3 minutes Anodized blue aluminum resists rust and UV damage survive mud, rain, or sandstorms..

Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us Our light bar clamp mount isnt just another accessoryits a game-changer for your off-road experience. Designed with riders in mind, it combines durability, flexibility, and ease of use. Whether youre tackling rocky trails or cruising through the desert, this mount keeps your light bar exactly where you need it..

HEAVY-DUTY CNC-MACHINED ALUMINUM The whip mount is made with CNC aluminum machining. Precision machining, excellent mechanical strength, beautiful glossy appearance, make this UTV whip mount the premium and solid product.. EASY TO INSTALL Installation requires only screws, no drilling or trimming. All necessary mounting tools and hardware are included.. 360 STABLE ADJUSTABLE 12 pins on the base allow angle adjustment from 30 to 360. Sturdy material, precision mechanism, and screw fixing, provide a secure mounting bracket for lights and flags.. APPLICATION 12.2mm 0.48inch hole diameter of the mount works well with whip lights, flags, light bars, light pods, antennas. FITMENT This UTV whip mount fits 1.75-2 roll bar, is compatible with Can-Am Maverick X3 X3 MAX, Polaris RZR, Talon, Kawasaki Mule Teryx... Does not fit Pro-Fit cage and ATV..

MATERIAL Whip mounts are made of cast aluminum and well finished. Strong, rustproof, impact-resistant, and scratch-resistant whip light mounting brackets, suitable for all weather conditions and situations. STRONGER Unique-designed flag mounts using stiffener ribs to be more stable. Cooperating with 10mm-thick bases, flag brackets would hold your products up to much off roading safer, comparing with other sheet or plastic flag mounting brackets in the market. 360 ADJUSTABLE Light bar brackets have 360 rotation adjustability for you to turn them as you like for different purposes. Light bar mounts using 12 pins to lock the mount in and keep them more stable than using a single screw. APPLICATION 12.2mm 0.48inch hole diameter of KEMIMOTO mounting brackets work great for installing led whip lights, flags, led light bars, led pods, cb antennas on the UTV cage. FITMENT CB antenna mounts only fit UTV pro-fit cages channel shaped cages, are compatible with Polaris Ranger General Polaris Expedition2024 2025 Can-Am Defender Commander 2021 Maverick Trail Sport.

Package 1pc Aluminum UTV Whip Light Mount with tools and installation instruction available. Function Mounting a flag or whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the KEMIMOTO mount for. In addition, the bracket adopts a double pipe clamp design, which makes the installation more secure.. Fitment KEMIMOTO whip light mount can be mounted on a 1.5 to 2 roll bar. That is to say, it works with all UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on. Installation Easy installation with all hardware included, directly bolt-on design, no drilling or trimming. KEMIMOTO whip lights mounting angle can be adjusted, you can loosen the bolt and twist it to the perfect angle you want.h RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, compatible with Talon, compatible with Mule YXZ, KUBOTA RTV and the list goes on. Material Aluminum with CNC cut for perfect outlook. KEMIMOTO UTV whip light mount is designed for long-term use, great for all weather conditions.

HEAVY-DUTY ALUMINIUM MOUNT The UTV flag mount is crafted from CNC 6061 aluminum alloy, making it more durable than standard metal or steel, and capable of handling even the largest LED whips, with greater load-bearing capacity and impact resistance. The ATV flag mount adopts a coating surface, which is heat-resistant and corrosion-resistant, and can resist rust and dust. Premium quality makes this light bar mount more sturdy and durable.. SECURE AND STABLE DESIGNXprite light bar mounting brackets are different from other flag brackets, the whip light mount comes with widened spacers, suitable for 1.75-2 inch bars, providing a secure and stable mount for your whip lights, flag poles, light bars, spotlight, chasing light, off-road vehicle LED lights, antennas or other application equipments. 360 ROTATION FLAG HOLDER BRACKET The flag holder for truck adopts a flexible and stable 360 adjustable design, suitable for different mounting angles. At the same time, the truck flag mount has a pull-out quick adjustment function, making it highly versatile in any off-road adventure.. CONVENIENT QUICK-RELEASE DESIGN The flag holder bracket features a quick-release design, providing a better user experience by making it more convenient to adjust the angle of the whip light and flag. This enhances the overall passability of the UTV and addresses the hassle of frequently dismantling the whip light for users.. COMPATIBLE WITH MOST OFF-ROAD VEHICLES Our light whip mount can be compatible with Can-Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, UTV Polaris YAMAHA, 4x4's, etc. Roll bar mount fits bars with 1.75 to 2 diameters and is stable and durable..

Stronger Grip Single-hinge design, double-bolt locking, and equipped with anti-slip rubber ring inserts with standard inner diameter sizes, allowing our UTV flag pole mounts to fit more closely against roll cages, roof racks, bull bars, head racks and motorcycle front shock absorption and other round pipes.. Heavy Duty With a thickened and reinforced design, our CNC machined aluminum mounting bracket is ideal for mounting heavy-duty whip lights, flag poles, light bars, spotlight, chasing light, off-road vehicle LED lights, antennas and other application equipments. CNC machined, Class III anodized finish ensures the durability and reliability of this UTV whip light mount even in the most demanding environments.. 360 Degree Rotation Adopts a snap gear design, which can easily adjust the angle of the installation equipment 360 degrees. The diameter of the hole used to install equipment screws is 12.7mm 0.5'', which can match the base screws of most whip lights, flag poles, light bars and antennas on the market.. Applicable tube Diameters Comes with four anti-slip rubber ring inserts in standard inner diameter sizes 1.5'' 1.75'' 1.85'' 2''. The inner diameter of the pipe clamp is 2.1'' without the rubber ring embedded. Therefore, this heavy-duty whip mount is ideal for mounting to installations with 1.5'' 1.75'' 1.85'' 2'' 2.1'' round rails on ATV, UTV, Truck, Off-Road Vehicles, Motorcycles and Boats.. Friendly Reminder If you have any questions about the products you received, please feel free to contact our store customer service. Our after-sales team will provide you with solutions within 24 hours. NOTE Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation.. Kit contains two whip mounts, heavy-duty, each weighing up to 300 g 0.66 lb 10.58 oz. Why Choose Us Our whip light mount isnt just another accessoryits a game-changer for your off-road experience. Designed with riders in mind, it combines durability, flexibility, and ease of use. Whether youre tackling rocky trails or cruising through the desert, this mount keeps your light bar exactly where you need it..

Warm Prompt for Compatibility 8 Beads Fixed grooves this item does NOT fit 6 ball bearings. Not compatible with whip lights with center pin. KEMIMOTO Spring Mounting Bases are specially designed for Whip Lights, UTV ATV side-by-side offroad led whip lights. Quick easy upgrade your whip lights. DO NOT work for antennas. Upgraded Anti-Rotation Design KEMIMOTO upgraded whip spring mounting bases are designed with 8-ball special grooves, whip lights stay firmly in place even when you are rocking and rolling down the trail. Compatible with utv atv whip lights that have an 8-ball bearing design. Easy installation Unlike other spring bases, KEMIMOTO whip spring bases don't need to rotate whip lights to fasten the spring base. Simply remove the original bases of whip lights and replace them with the upgraded KEMIMOTO spring base right away Quick installation in one second. View the video to confirm the compatibility of your whip light with the KEMIMOTO spring bases. Protect Whip Light Adds extra flex to your utv whip lights. It will help save your whip in the wind from being damaged from its bending let the spring bend, not the whip itself. they seem very stiff, but they do bend very easily with the whips in place. Especially in high winds or driving in the jungle. Heavy-Duty KEMIMOTO Spring Bases are made of heavy-duty Spring Steel with Solid Black Powder Coating. The washers and nuts are 304 Stainless Steel which means the bases are anti-rust, corrosion, and scratch-resistant. What You Get Every spring base comes with one spring washer, one flat washer, and one nut.

Wide Compatibility- This UTV Pro-fit roll cage whip light mount is widely compatible with all UTVs with Pro fit Cage. Fits Polaris General, fits Ranger, fits Can-Am Defender, fits Commander and Maverick SportTrail, fits CFMOTO UFORCE 6008009501000, fits Kawasaki RidgeCrew, etc.. Versatility- The whip light mount can provide 12 diameter mounting holes on the roll cage for aftermarket antennas or whip lights, cargo lights, marker lights, reverse lights, third brake lights, strobe lights, pod lights and other auxiliary lights.. 360Adjustment Design- Our UTV whip mount is designed with a 360adjustment construction, you can adjust the angle you need, allowing you to position your whip lights at just the right angle for maximum visibility and style.. Durable Stylish- Our whip light mounting brackets are made from premium material and rust-resistant process, it is built to withstand even extreme weather conditions.Also with special cutting, the appearance looks more eye-catching, more texture and layering.. Installation Package- Easy to install with its clamp-on design, directly Clamp onto the roll cage, no drilling or modifications are required. Package includes 2 x Whip Light MountPro-fit.

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the red mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

The light mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.. Fit on 0.87511.1251.261.375 tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail .. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights.. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 0.875 22mm, 1 25.4mm, 1.125 28.6mm, 1.26 32mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp mount have a 1.375 34.92mm diameter mounting hole when without the rubber ring insert.. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation..

STURDY AND DURABLE Made from heavy-duty CNC aluminum alloy, this whip light mount holds your whip lights or flags securely. It also comes with a nylon patch lock screw to ensure stability even during rough rides and challenging terrain. PRO-FIT CAGE FITMENT We are aware that many whip light mounts available on the market are designed for round roll cages. To cater to the needs of those requiring profilepro-fit roll cage mounting, we have developed this specific type of whip mount, ensuring it is both robust and reliable. EASY TO INSTALL Our design incorporates fewer components than other UTV light bar mountbracket solutions, enhancing stability and durability while also making installation more straightforward and efficient for you. ADJUSTABLE TO ALL ANGLES By loosening the nylon lock screw, you can adjust the utv flag mount in a full 360-degree rotation. This allows you to find the perfect lighting angle for better driving visibility and a safer journey. WIDE APPLICATION Universal fits for a wide range of Pro-fit cage UTVATVSXS vehicles, including RZR Polaris Ranger General, Can-Am Defender Maverick TrailSport, and Commander 2021. With the whip light mounting brackets, you can securely attach your flag, whip light, light pod, bar, antenna, and more with ease.

1. Precision 24-Tooth 360 Rotation Upgraded from 12 to 24 micro-serrated teeth for finer 15 adjustmentslock your whip light or flag at the exact angle you need, even on uneven terrain. No more close enough compromises. 2. Heavy-Duty CNC Aluminum Anti-Loosening Bolts Machined from 6061 aircraft-grade aluminum with zinc-alloy bolts that resist stripping and over-tightening. Holds 48 LED whips through brutal off-road impacts tested on RZR Turbos Can Am X3.. 3. Universal Fit, Zero Guesswork Fits 1.75-2 roll cages on all major UTVs Polaris RZR including 2024 Turbo R 4, Ranger, Can Am Maverick X3Commander, Kawasaki Teryx, Yamaha Wolverine, Jeep Wrangler. Includes sizing guide to confirm compatibility.. 4. 5-Minute Installation All hardware includedjust hand-tighten 5 bolts. Pre-assembled clamps with internal teeth grip cages securely, even on custom setups no rattling or re-tightening needed.. 5. Scratch-Resistant Protected Delivery Anodized black finish withstands branches and debris. Ships in boxes with bubble wrap to prevent transit damage..

Die-casting Aluminium Flag Holder Benlari UTV flag mount is made of Die-casting Aluminium, offering superior strength and stability compared to standard metal mounts. The whip light mount is compatible with Polaris General Can-Am Defender Commander.. Enhanced Gear Design with 360 Adjustability The UTV whip mount features an upgraded gear-type center structure, enabling 360 rotation and precise 15-degree incremental angle adjustments. This allows easy positioning for various uses, while the load-bearing bracket clamps firmly with even force distribution, ensuring stable mounting for flags or lights.. Universal Compatibility The 13mm 0.51-inch hole diameter of the UTV whip holder is ideal for mounting LED whip lights, flags, LED light bars, LED pods, and CB antennas. It easily installs on roll cage bars measuring 1.75 to 2 inches in diameter.. Durable Coating The Light Bar Bracket features a special coating on its surface, which can resist high-temperature baking and erosion from complex weather like rain, snow, wind and frost. This further extends the bracket's service life, making it suitable for various off-road environments.. Easy to Install The package includes a mounting tool for easy installation with a direct bolt on design without any drilling required. The whip light mount features an adjustable angle simply loosen one bolt to set it to your desired position. Please verify your roll bar size before installation..

Package includes- A Pair of Black Mounting Bracket. Material- Powder coated black finished for a sleek look waterproof and long service life. Easy Install- Easy to instal without drilling holes, Install this bracket on the rear, Great for LED whips, Chase Lights, Back up lights. FITMENT- For Polaris RZR 800 2008-2014, RZR 900 2015-2020, RZR 4 XP 1000 2015-2022, RZR S 1000 2015-2021, RZR S 900 2015-2021 Models. FITMENT- For Polaris RZR XP 2015-2018, RZR XP 1000 2014-2023, RZR XP 4 2016-2018, RZR XP 4 1000 2014-2021, RZR XP 900 2011-2021 Models.

Application Z8LED whip light holder fits for 1.75 2 inches roll bar. such as RZR 900 1000 XP Pro, Maverick x3 Commander, Talon, Mule YXZ, and the list goes on.. FunctionMounting a flag fog light whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the flag mounts for.. Design The 12-hole design allows you to adjust to your favorite or suitable angle, and at the same time make the UTV bracket more powerful and stable. The ring mouth of the flagpole holder is wavy, making it better fixed on your utv.. Material Made of aluminum alloy, CNC cut, thicker than other brackets on the market, light and strong, with a perfect appearance.. Installation No modification or drilling is required. Tools and accessories are already included. It can be installed easily just by tightening the screws ..

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the blue mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

The rail mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Multi-Function Mounting a flag or whip light to your UTV will make you stand out from other riders wherever you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the flag mounts for. Aluminum Made KEMIMOTO UTV flag whip lights are made of aluminum with CNC cutting perfect outlook owned the feature of scratch resistance, dustproof, corrosion resistant and not easy to fade. Flag mount is designed for durable use, which is great for all weather conditions. More Stable Construction and 360 Degree Rotation Design UTV whip mount is designed with 12 Pins so as to make it stable even riding in harsh terrain and you can adjust the proper angle to Fit the Vehicle. Easy to Attach You can finish the installation within minutes due to all hardware and installation manual included, KEMIMOTO light mount has directly bolt-on design without drilling or trimming. The mounting angle can be adjusted by loosing the bolts and change it to the perfect angle you want. Wide Application Universal fits all Pro fit cage UTVs. The whip light mounting brackets will be compatible with Polaris Ranger General Can am Defender Maverick Trail Sport and Can am Commander 2021. The flag mount can be mounted on all channel-shaped bars. You can also use these pro-fit mounting brackets to hold your off-road led light bars, CB radio antennas, whip lights, etc.

FitmentThe whip light mount flag brackets for your CF Moto Zforce Gen 2 UTV. Anti-vibration designOur brackets significantly reduce whip vibration and wobble, preventing your expensive LED whip lights or flags from loosening or breaking. Ensures your signals remain stable and visible on the toughest trails. Whip light mount flag bracketsSecurely mount your LED whip lights or flags to increase your vehicle's profile. Crucial for night riding, group off-roading, or dune adventures, making you more visible to others and significantly improving trail safety. High-quality materialBuilt to last with robust iron material and a corrosion-resistant black finish. Withstands the impacts of rocks, debris, and harsh weather conditions, providing reliable season-after-season performance for all your off-road adventures. Package includedGet ready to ride fast You need is included a pair of brackets and necessary bolts. Simply bolt them onto your CFMOTO's existing mounting points.

Package Included- 2 Pcs '17-'24 Can Am X3 Flag Mount Brackets. FITMENT- Whip light mounting brackets for 17-2024 Can Am Maverick X3 and X3 Max, X3 RS Turbor, X3 Max Ds Turbo RR. Durable Material- This whip flag brackets mount is made of hard metal, Strong and durable, Black coating, Resist corrosion and rust. Adjustable- Whip lights X3 Mounting Bracket has a 20 adjustable mounting angle for you to adjust the whip light to stand straight up or with a nice slant. Material- Made of solid metal, durable service Black coating finish, Consistent with your vehicle, Make it outstand in the crowd, Adjustable design, Make it meet the needs of various application scenarios.

Durability Polaris general whip mounts made from heavy-duty materials CNC machined aluminum, which provides excellent corrosion resistance and can withstand harsh off-road conditions, it can be used for all weather conditions and situations.. Easy Installation The design of utv whip light mounts polaris general allows for easy and quick installation, without the need for drilling or extensive modifications to the UTV. Directly mount it to your UTV with pro-fit or profile cage with screws.. Secure Attachment The polaris general whip light mounts designed to securely hold whip lights, flags, or antennas, preventing them from coming loose during rough rides. This is crucial for maintaining visibility and communication while off-roading.. Application Pro fit whip light mount compatible with Polaris General all models, compatible with Polaris Ranger Most Full-size Rangers 2014, compatible with Can-Am Maverick Trail, Sport, and Sport MAX and Can-Am Commander 2021. Fit for all utv with pro-fit or profile cage.. SUNPIE Service SUNPIE provides 5 years of service for this pro fit whip mount. Any issue during the warranty, please contact us or the local customer service for replacement..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Stable Sturdy Structure The whip light mount is made of solid 6061-T6 aluminum alloy, CNC machining, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1 mm, 1.6541.91 mm, 1.7544.45 mm, 1.8546.99 mm, with the rubber ring insert removed, the clamp mount diameter is 250.8 mm. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Wide Application The hole size of utv light bar mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.5, 1.65, 1.75, 1.85, 2 bull bar crash bar roof rack roll bar cage. Please Note Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Spiral RGBW Chasing 3ft Whip Lights 3 foot whip lights for UTVs with hundreds of colors, dancing patterns, and adjustable brightness and speed settings. The tightly coiled lighted whip design ensures a 360glow, delivering brighter, more uniform lighting. Ensure your safety on the night trail and always stand out during the ride. Dual Control and Music Syncing Easily explore a variety of color, brightness, and pattern settings in the App or 24 keys remote. ATV LED whip lights syncs with your music's beats through the app or phone mic, creating a fully immersive off-road experience. Adjust the external mic sensitivity in the app before using the music sync function. Upgrade Spring Base and Strong 3' whip lights for side by side come with two rugged spring bases.The reinforced spring base has more spring coils and a thicker diameter than others,ensuring greater elasticity and better pressure buffering.IP67 Waterproof,Sandproof,Shockproof.Gives you more confidence when you are offroad on tough terrains or in extreme weather. Turn Signal and DIY Create exclusive lighted whip colors with APP. Memory Function makes RZR whip lights stay at your favorite light settings. No need to reset. Our LED whip lights come with synchronized left and right steering,reverse,and brake warning functions to enhance driving safety. The timing function allows Can-am whip lights to automatically turn offon based on scheduled time. Wide Applications and Easy Installation Suitable for UTV, ATV,4 Wheeler,trucks, Go Kart,RZR, Can-am, Polaris, Dune Buggy, Sand Rail, Motorcycle and Boat,etc. Install the whip light in a 12mm hole. Connect the whip lights to the controller wire, then connect it to the included rocker switch and 12V vehicle battery. The rocker switch helps prevent the vehicle battery from draining and protects the whip light. Warm Tips Comes with 6 flags, including 2 uniquely designed by Ehaho, to showcase your individuality. The whip light control box has a built-in fuse, which acts as a protective vehicle, so there is no need to install an additional fuse. Our whip light is 12V DC. If you use a power supply higher than 12V, it is recommended to use a voltage converter. Set the sound sensitivity of the external mic on the app before using music synced function.

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Stable Sturdy Structure The whip light mount is made of solid 6061-T6 aluminum alloy, CNC machined, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1mm1.6541.91mm1.7544.45mm1.8546.99mm, with the rubber ring insert removed, the clamp mount diameter is 250.8mm. Wide Application The hole size of utv light bar mount is 0.512.7mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.51.651.751.852 bull bar crash bar roof rack roll bar cage. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Stable Sturdy Structure The utv flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the whip mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of TPU soft rubber ring inserts 1.538.1 mm, 1.7544.45 mm, 1.8546.99 mm, 250.8 mm, when the rubber ring insert is removed the whip mount diameter is 2.153.34 mm. 360 Flexible Rotation The whip flag mount can be rotated 360, and can be adjusted flexibly to any angle you want to install the flag or whip light. Wide Application The hole size of atv whip mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The utv whip flag holder can easily mount on 1.5, 1.75, 1.85, 2, 2.1 bull bar bumper roof rack tubular bar roll bar cage. Please Note Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

FIT FOR CAN AM X3The 2PCS stainless steel x3 whip light mount easily installs on 1.75inch to 2inch X3 roll cage bars. Its 13mm 0.51 mounting hole is ideal for LED whip lights, flags, LED light bars, LED pods, and CB antennas. NOTEPlease verify your roll bar size before installation.. HEAVY DUTY STAINLESS STEELThe UTV whip light mount is constructed from heavy-duty stainless steel, offering greater hardness and tensile strength than aluminum. Engineered to withstand the significant elastic force produced by a shaking LED whip light, it resists breakage and fatigue. Its stainless steel build makes it suitable for all outdoor and weather conditions, providing excellent corrosion resistance for maximum durability.. 15 DEGREE ADJUSTABLE GEARThe UTV light bar mount bracket features an upgraded gear-type core with 15-degree adjustment grids for precise angle changes. Its load-bearing clamp secures firmly and distributes force evenly, ensuring a rock-solid mount for your flag or light.. 360 FLEXIBLE STABLE ROTATIONThe x3 flag light mounts offer 360 of rotation for flexible adjustment, featuring a gear-type structure that allows easy repositioning to suit any need, making them a versatile off-road accessory.. QUICK INSTALLATIONThe X3 Whip Light Mount 2PCS kit includes a mounting tool for direct bolt-on installationno drilling needed. The whip light mount itself is angle-adjustable simply loosen a single bolt to set your desired position..

1.fitments The ATV mounts fits 78-98 tubular bars and handle bars, good for RZR, Yamaha, Polaris and many ATV models.. 2.Stable and Sturdy mounts for ATV Solid Materials and Construction made of the ATV flag whip mount,, heavy duty and unbreakable. 3. CNC CUTSstrong CNC machined aluminum construction, stable and beautiful ATV mounts. 4. BrandZidiyoruo, a brand famous for ATV accessories, UTV, SXS, ATV flag or whip mount. 5.3 colorsThere color available, black, red, and blue, choose the ATV mount color match your vehicle.. 6. 360 degreethere are 12 pins, rotate the 12 pins, 30 degree each, find the best angle to install your flag, whip light, chasing light and light bars.

Specialized Vehicle Design Designed specifically for 2016 3rd Gen Toyota Tacoma. Ensure compatibility with your vehicle before purchasing to guarantee a perfect fit. Multi-purpose Design Versatile design allows you to mount a rear-facing LED pod, CB antenna, for GoPro camera, whip flag, or any other accessory, maximizing the utility of your tailgate space. Durable Construction Crafted from high-quality steel and finished with a black powder coat to resist rust and corrosion, ensuring long-lasting performance and reliability. Simple Installation No drilling required This mounting bracket bolts directly onto your truck using factory bolts, making installation quick and easy. What You Get 1x heavy-duty pod light mounting bracket, Driver's or passenger's side available. ready to enhance your Tacoma's functionality and style..

Sturdy bracket Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks. Wide application Can be used on tubes of 1, 1-12, 1-34 2 In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 2Pcs LED light bar mounting bracket. 2 Years Warranty Honored by Nilight..

360 dgree adjustmentWe adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off. Premium QualityPrecision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket. For Pro-Fit Cage OnlyThe whip light mounting brackets will be compatible with Polaris Ranger General Can am Defender Maverick Trail Sport and Can am Commander 2021, you can choose to install the UTV flag mount in a rear or front pro-fit cage. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want. Multiple ApplicationThe hole diameter size of the mounting bracket is 12.5mm0.5 inch. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc.

Stable Sturdy Structure The whip flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1 mm, 1.6541.91 mm, 1.7544.45 mm, 1.8546.99 mm, with the rubber ring insert removed, the clamp mount diameter is 250.8 mm. Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. An allen wrenches is included for easy installation and removal. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Wide Application The hole size of utv light bar mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.5, 1.65, 1.75, 1.85, 2 bull bar crash bar roof rack roll bar cage. Please Note Pack of 1. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Fitment Compatible with Can am Maverick X3 2017-2021, direct mounts on rear pillar with stock bolts, no modification required. Multipurpose Can be widely used for radio antenna mounts, lighted whips, Go Pro, Fiberglass whips, led pod light mounts. Hole size for Can am X3 Whip Mounts is 12.3mm 0.48inch in diameter. Solid Built Well constructed with 3MM sturdy steel and painted with quality finishes, no corrosion, no vibration for durable use. Adjustable Use 30adjustable mounting angle for the flag antenna rear mounts, can be installed either inside or outside of the roll cage with the whip mount tab up or down. Package Include 1 pair of rear pillar flag antenna mounting brackets left and right. 2 Years Warranty Honored by Nilight..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The light bar mount can be securely fastened to the roll cage on any terrain. Includes two allen wrenches for you to install and remove. Heavy-Duty Clamp Mounts The light bar mounting brackets are crafted from sturdy 6061-T6 aluminum alloy, CNC machined, with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Rubber Ring Inserts Including 4 sizes of anti-slip TPU rubber ring inserts in 0.87522.2mm125.4mm1.12528.6mm1.2632mm. when the rubber ring insert is removed the light bar clamp mount diameter is 1.37534.9mm. Thickened Base The base of led light bar mounting brackets are thickened to 0.4712mm. Sturdy and durable, excellent load-bearing capacity. Wide Compatibility Light bar tube mounts base hole is 0.3910mm in diameter, compatible with a wide range of light bars and motorcycle flags, which means you can mount anything on the roll cage mounts as long as it can be inserted into the 10mm base hole. Multi-purpose The led light mounts can be widely used for 0.87511.1251.261.375 diameter handlebars, bull bars, roof racks, tubular bars, roll cages or any round bars on motorcycles, bicycles, ATVs, UTVs, boats, jeeps, trucks. More Size Options You can insert 1.26 rubber ring into 0.875 or 1 rubber ring, and cut and combine different diameters of rubber ring inserts according to your needs to be compatible with 0.78720mm0.7519mm0.718mm roll cage. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Heavy-Duty Whip Mount Tavaray whip light mounts are made from premium aluminum alloy for superior strength and impact resistance. More durable than standard metal or steel, with a protective coating that resists heat, corrosion, and rust for long-lasting performance in any off-road conditions.. Flexible 360 Rotation Our UTV whip mount features a unique 360 adjustable gear-tooth design for quick, precise angle adjustments. This light bar mount offers smooth, flexible movement. Unlike ordinary pinhole mounts that wear out, rust, break easily with complicated hole patterns.. Universal Compatibility Comes with wider spacers for secure mounting on 1.65-2 roll bars. This roll cage mount fits most off-road vehicles including Can-Am Maverick X3, Polaris RZR XP 1000900, Yamaha, Sand Rails, Buggies, Commander, 4x4s, and more.. Multiple Application The whip light mounting bracket has a 0.5-inch mounting hole, combined with 3 non-slip rubber pads, firmly holds whip lights, flagpoles, spotlights, chase lights, antennas, light bars and other application equipments even on the roughest terrain.. Easy Installation No drilling or special tools required. The dual-bolt clamp design with locking nuts allows fast and easy to install. Simply loosen the bolt to adjust the mounting angle to your preference. All hardware is included for a quick, secure setup right out of the box..

360 dgree adjustmentWe adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off.. Premium QualityPrecision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket.. Fit SizeSpecially designed for flag antenna whip mounts on all UTVs with 1.5 to 1.75 and 1.75 to 2 Round Roll Cages, such as Polaris RZR, Ranger, Can-Am Maverick X3, Commander, Yamaha, Kawasaki, Honda Talon Pioneer, ect.. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want.. Multiple ApplicationThe hole diameter size of the mounting bracket is 12.5mm0.5. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc. 2 Years Warranty Honored by Nilight..

360 dgree adjustmentWe adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off. Premium QualityPrecision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket. Fit SizeSpecially designed for flag antenna whip mounts on all UTVs with 1.5 to 1.75 inch and 1.75 to 2 inch Round Roll Cages, such as Polaris RZR, Ranger, Can-Am Maverick X3, Commander, Yamaha, Kawasaki, Honda Talon Pioneer, ect. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want. Multiple ApplicationThe hole diameter size of the mounting bracket is 12.5mm0.5. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc.

Stable Sturdy Structure The atv flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the whip mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the atv whip mount in place has two pressure washers, making the whip flag mount more secure and firmly fastened to the roll bar. An allen wrench is included for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of non-slip TPU rubber ring inserts in 0.87522.2 mm, 125.4 mm, 1.12528.6 mm, 1.2632 mm, when the rubber ring insert is removed the whip light mount diameter is 1.37534.9 mm. 360 Flexible Rotation The whip flag mount can be rotated 360, and can be adjusted flexibly to any angle you want to install the flag or whip light. Wide Application The hole size of atv whip mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The atv light bar mount can easily mount on 0.875, 1, 1.125, 1.26, 1.375 tubular bars handlebars bumper roll bar cage for atvs motorcycles utvs or other off-road vehicles. Combination of Different Sizes By inserting 0.875 and 1 soft rubber rings into 1.26 rubber rings, combining them to get more new sizes of rubber ring inserts, which are compatible with 0.78720 mm, 0.7519 mm, 0.718 mm roll bars. Please Note Pack of 1. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

The rail bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roll bars, roof racks, roll cages, bull bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation. Color Red, Quantity 2 PCS.

Upgraded Anti-Rotation Design Tavaray whip light spring base is built for whip lights with an 8-groove locking base, delivering a secure hold that won't twist or loosen. Anti-rotation grooves keep your LED whips upright and secure on any terrain. NOT for 6-ball bearing or center-pin mounts.. Heavy-duty Spring Base Crafted from durable aluminum alloy for strength, corrosion resistance, and long-term use. Built to handle mud, rain, harsh outdoor conditions, and high speed vibration without cracking or bending over time.. Easy to Install No tools or modifications needed. This UTV whip lights spring mounting base features a quick-release design makes attaching or removing your whips in seconds. Perfect for trail riders who value convenience and flexibility on the go.. Shock-Absorbing Spring The built-in barrel spring absorbs shocks and reduces vibrations on rocky trails and bumpy roads. Keeps your whip lights protected from bending or breaking during aggressive off-road riding.. Universal Fitment This LED whip light spring base fits any UTV, ATV, SXS, or off-road vehicle with a 0.450.47 inch mounting hole or M12 threaded bracket. Great for Polaris RZR, Can-Am Maverick X3, dune buggies, golf carts, and more. Note Not suitable for antennas..

Heavy-Duty Whips Mount Xprite whip light mounts made from CNC-machined aluminummore durable than metal or steel, and capable of handling the fat LED whips for superior strength and shock resistance. Our whip light brackets coated surface resists heat, corrosion, and rust, ensuring durability in any off-road environment.. 360 Adjustable The utv whip light mount is designed with a precision gear teeth, allows for 10-360 of flexible and stable angle adjustment for different mounting angles. This atv flag mount has a vibration-resistant design ensures a secure hold, even on rough terrain.. Universal Compatibility The utv flag mount fits roll bars ranging from 1.75 to 2 in diameter. Come with three non-slip rubber pads for a firm grip. Compatible with ATV, UTV, SXS, RZR, Polaris RZR 1000 XP, Can-Am Maverick X3, Jeeps and more.. Multi-Purpose Mounting With a 12mm mounting holes, this roll bar light mount is works for securely mounting whip lights, antennas, flags, chase lights, work lights, off-road lights, light whips for side by side, and LED light bars on roll bars, bumpers, or roof racks.. Quick Easy Installation No drilling or modifications needed This direct bolt-on whip light mounting bracket comes fully assembled, clamps down and is ready to use. Comes with all the necessary hardware for a quick installation..

Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us Our light bar clamp mount isnt just another accessoryits a game-changer for your off-road experience. Designed with riders in mind, it combines durability, flexibility, and ease of use. Whether youre tackling rocky trails or cruising through the desert, this mount keeps your light bar exactly where you need it..

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, head racks, roll bars, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Wide Adjustment Range The light mount brackets are equipped with a 8mm hole, compatible with a variety of light bars or led lights and provides a 48mm range of adjustment, allowing you to flexibly adjust the installation position of light bar. Solid and Durable Material The utv light bar mount is constructed from sturdy 6061-T6 aluminum alloy, CNC machined, the light bar clamp is finished with III grade hard anodized surface. Sturdy and durable, resistant to oxidation and weathering. Single Bolt Hinge Design Simple to install with only 1 screw to hold it in place. The screw that secures the light bar mounting brackets have 2 pressure washers for a stronger hold on the roll cage. Tool comes with two allen wrenches for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of TPU soft rubber ring inserts 1.538.1mm1.7544.45mm1.8546.99mm250.8mm, when the rubber ring insert is removed the roll bar mounts diameter is 2.153.34mm. Universal Compatibility The light bar mounting brackets can be widely used for 1.51.751.8522.1 diameter bull bar, roof rack, grille guard, tubular bar, roll bar or any diameter round tubes on ATVs, UTVs, boats, jeeps, trucks, off-road vehicles and etc.. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

The whip light mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 0.87511.1251.261.375 tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail . The whip flag mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 0.875 22mm, 1 25.4mm, 1.125 28.6mm, 1.26 32mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp mount have a 1.375 34.92mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Fitment This UTV roll cage whip light mount is specially designed to fit ZFORCE 950 SportSport-4TrailG22023-2026 and fit ZFORCE 800 TrailG22023-2026.. Wide Application The whip light mount can provide 12 diameter mounting holes on the roll cage for aftermarket antennas, whip lights, cargo lights, marker lights, reverse lights, third brake lights, strobe lights, pod lights and other auxiliary lights.. Durable Material Our Whip Light Mount bracket is made of 3mm heavy-duty steel and features a weather-resistant finish that is built to withstand even extreme weather conditions.. Easy Installation With our easy-to-follow instructions, you'll have your whip light mount brackets installed in no time by using the stock holes on the roll cage directly, so no drilling or modifications are required.. Package included 1 x Driver Side Whip Light Mount, 1 x Passenger Side Whip Light Mount, 1 x Installation Instructions.

Durable Material Made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.. Free Adjustability Youre able to freely adjust 180up and down and 60left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.. No Drilling Anti-slip Design No drilling is required, just clamp the kit and tighten up. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood.. High Compatibility Can used to mount different thickness of work lights, fog lights, driving lights etc. As only the max limit of the clamp board thickness on the vehicle is within 8mm.. Package Include 2 x 304 stainless steel brackets Lamp is not included., 2 x hex Allen wrench..

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the red mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. An allen wrenches is included for easy installation and removal. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1 mm, 1.6541.91 mm, 1.7544.45 mm, 1.8546.99 mm, with the rubber ring insert removed, the clamp mount diameter is 250.8 mm. Stable Sturdy Structure The whip flag mount is made of solid 6061-T6 aluminum alloy, CNC machining, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Wide Application The hole size of utv light bar mount is 0.512.7 mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.5, 1.65, 1.75, 1.85, 2 bull bar crash bar roof rack roll bar cage. Please Note Pack of 1. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Sturdy bracket strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Wide application can be used on tubes of 1, 1-12, 1-34 2 in diameter and applied to led light bar for almost all kinds of vehicle. Easy installation pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 4 PCs led light bar mounting bracket, 2 Years Warranty Honored by Nilight.

Fits SizeCan be used on tubes from 2.87inch to 3.2inch, the holes for mount lights is perfect for whip lights with M12 or 12 screws, also suitable for screws with a MIN diameter of M8 needs washers for firm installation.. Premium QualityPrecision-welded from cast heavy duty 6063 aluminum with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket.. Anti-Slip ProtectionThe internal sides are designed with anti-slip tooth, which can firmly grip the mount, making the bracket hold the whip lights or light bar firmly, meanwhile avoid your lights from being damaged, comes with the rubber inserts dempen, help dampen vibrations during off-roading and protect your bull bar from being scraped.. Wide ApplicationThis Mounting Clamp Set is perfect for creating unique mounting points on bumper bars, ATV, UTV, RV, truck, boats, tractor, quads, motorcycl, 4x4 offroad, farm vehicles, and roof racks, test tubes, anti-collision Rod, roll cage etc. Can work with most whip lights, Work Lights, Fog Lights, Driving Light, LED Light Bar.. Easy installationTube bracket clamps is easy and direct installation, no drilling or welding required, and it is not damage to the vehicle surface. Achieve adding more lights to the vehicle without drilling holes. 2 Years Warranty Honored by Nilight..

Multipurpose Off-Road Compatibility - Designed for 1.75-2 roll bars, this UTV light mount bracket fits UTVs, ATVs, trucks, boats, motorcycles, and farm vehicles. Compatible with popular models like Polaris RZR, Can-Am Maverick X3, Yamaha, and more. Clamp it on and mount your lights to tackle any adventure.. Universal Fit with Versatile Mounting - Featuring a 10mm installation hole and equipped with M6 and M8 rubber nut inserts, this mount supports various accessories. Perfect for LED light bars, driving lights, work lights, antennas, and more. Compatible with M6, M8, and M10 applications for complete flexibility in mounting options.. Heavy-Duty Aluminium Alloy Construction - Crafted from premium 6063 aluminium alloy with precision CNC cutting and a black powder-coated finish, this mount offers outstanding durability. The internal tooth design ensures a tight grip on roll cages, providing long-lasting performance in even the harshest off-road conditions.. 360 Adjustable Rotation for Flexibility - The 360 rotating design with a toothed meshing structure lets you precisely position lights. The anti-shock design maintains your desired angle even on rough terrain. Adjust and secure your accessories easily for optimal visibility during off-road rides.. Quick and Hassle-Free Installation - Installation is a breeze with the included hardware and Allen key. Designed for 1.75-2 roll bars, this mount securely attaches without the need for drilling or modifications. The package includes two black UTV light mounts, ensuring a fast, secure setup for any terrain..

1. Optimal Lighting Positioning - Off-Road Light Bar Mount and Cube Light Bar Mounts feature a 360 angle rotation for customized Motorcycle and ATVs lighting angles to meet all your off-road needs. Fits 0.75-1.5 bars. 2. Rock-Solid Stability - Hang tough on even the roughest rides with our durable mount designed to secure a variety of lighting options.. 3. Easy Installation - This motorcyle ATVs Bars Size compatible mount includes an Allen key to make your installation process a snap. 4. Built to Last - Constructed with 6063 aluminum alloy materials, our LED Light Bar Bracket was built to withstand tough off-road conditions and provide long-lasting use.. 5. Perfect Fit - Ideal for use with motorcycle ATV and other bars sized from 0.75-1.5, our secure mount option will effortlessly hold your light bar in place, no matter where your adventure takes you.

FitmentThis bracket is suitable for 2017 to 2019 Can Am Maverick X3,2019 Polaris RZR Turbo S and mounting on roll cages ranging from 1.75 inches to 1.875 inches.. FunctionYou can use the flag bracket in a variety of scenarios,such as fixing off road LED light bars,flags,whip lights,radio antennas,etc,for a wide range of applications.. High Quality Material The main material is high quality aluminum alloy, using professional CNC cutting technology,the product is wear resistant. In order to enhance the waterproof function of the product,black powder is also applied to the surface of the product.. Easy to OperateNo drilling or other complicated operations are required,just unscrew and adjust the desired angle.. Package Included1x flag mount..

BRACKET APPLICATION LED light bar mounting bracket is designed for Pro-Fit Cag, for Polaris General Ranger Can-Am Defender Commander Maverick Sport Trail. NOTICE NOT FOR ROUND-FIT CAGE. MOUNT HOLE APPLICATION UTV light bar mount measures 0.47 inches in diameter, please check the dimensions of your flagpole, light bar, antenna, etc. 360 ADJUSTABLE TEETH DESIGN For Polaris Ranger whip flag mount adopts a teeth design, you can loosen the screw to adjust the angle, stronger, more durable, and more flexible to rotate the equipment. HEAVY-DUTY ALUMINUM ALLOY UTV whip light mount is made of high-quality aluminum alloy, rust-proof, sturdy, and durable exquisite workmanship makes it fit the product and is easy to use. EASY TO INSTALL UTV light bar mount is easy to install, no drilling required, no glue required, installation tools are provided, quick to install. WHAT YOU GET 1 Pack light bar mount for UTV Polaris Ranger General Can-Am Defender Commander Maverick with Pro-Fit Cage.

BRACKET APPLICATION LED light bar mounting bracket is designed for 1.75- 2 roll bars, like UTV, ATV, golf cart, boats, off-road, bikes, camps, wheelchairs, scooters, walkers, including for Polaris RZR 900 1000 XP Pro Ranger General, for Can-Am Maverick X3 Commander, for Pioneer YamahaTalon Mule YXZ. MOUNT HOLE APPLICATION UTV ATV light bar mount measures 0.47 inches in diameter, please check the dimensions of your flagpole, light bar, antenna, etc. 360 ADJUSTABLE TEETH DESIGN UTV ATV whip flag mount adopts a teeth design, you can loosen the screw to adjust the angle, stronger, more durable, and more flexible to rotate the equipment. HEAVY-DUTY ALUMINUM ALLOY UTV ATV whip light mount is made of high-quality aluminum alloy, rust-proof, sturdy, and durable exquisite workmanship makes it fit the product and is easy to use. EASY TO INSTALL UTV ATV light bar mount is easy to install, no drilling required, no glue required, installation tools are provided, quick to install. WHAT YOU GET 1 Pack light bar mount for UTV ATV with 1.75-2 Roll Bar.

Comes with 3 non-slip rubber inserts with a wider range of sizes, perfect fit with 1, 1.5,1.75, and 2 in diameter Round Roll Cages. UTV Whip Mount Flag Holder Adjustable 360 Rotation Whip Light Mounting Bracket Fit for Talon, ATVs, UTVs, Trucks, Polaris RZR, Ranger, Can-Am. For mounting whip lights, Antenna, flags, chasing lights, work lights, and Light bars. 360-degree adjustable serrated engagement structure for different mounting angles. Direct bolt-on design, UTV Whip Mount is easy to install with just a few screws to tighten. One set of packaging 2Pcs 1 to 2 360 Rotation flagpole brackets, 2Pcs 0.78-inch washers, 2Pcs 1.14-inch washers, 2Pcs 1.57-inch washers, 2Pcs wrench accessories.

Compatible with Can Am Maverick X3 X3 MAX 2017-2026 2PCS. Made of solid metal, durable service Adjustable design, make it meet the needs of various application scenarios. Black coating finish, consistent with your vehicle, make it outstand in the crowd. Quick easy to install, no drilling or cutting. Package include One pair of antenna mounting brackets with all mount hardware.

FITMENT - The Bed pods light mounts compatible with 2016 third gen Toyota Tacoma. Passenger Side .NOT compatible with 2024 4th Gen Tacoma.. MULTI PURPOSE - The Tacoma bed pods mount has a 10mm mounting hole for led pods, antenna, led whip light, flag, camera, etc.. NO DRILLING NEEDED - The led pods mount is easy bolt on installation, lines up with the original holes, no modification is needed.. DURABLE CONSTRUCTION - This tailgate antenna mount bracket is made from high grade steel with black powder coated for against rust, corrosion and scratch.. PACKAGE INCLUDED - 1 piece of 2016 Tacoma pods mount Passenger Side.

Compatible with The Brackets fit for 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 Polaris Ranger full-size body and Ranger 570 800 900 900 XP 1000 XP 1000 Crew XP 1000 for more specific vehicle models, please refer to the details page. No Drill Very easy to install. Just directly install it on both sides factory bolt holes of the rear roof, and use factory screws, no need to drill or cut. Excellent quality Made of thickened solid iron alloy, durable, CNC formed and pressed, precise size, smooth edges, electrophoresis process, covered with thickened black matte powder, durable and non-fading and not easy to scratch for long service life. Wide Applications With various uses, not limited to rear lights, backup lights, whip lights, but also suit rear view cameras, whips, antennas, etc. Package Include 2pcs mounting brackets, a pack of spare hardware.

Fitment This rear roof pillar mounting bracket is compatible with Polaris Ranger 2013-2026 models.. Premium Material The LED light mount bracket is made with sturdy steel material and a rust-resistant coating, a sleek design that will complement the look of your vehicle. It's a durable and long-lasting investment for your vehicle.. Enhances Illumination This Reverse LED Light pod mounting bracket provides two mounting points on the B-Pillar upper rear windshield over the Roof to add 2 cube lights as backup reverse off-road lighting equipment.. Easy Installation The installation process is easy to follow with all the necessary hardware included in the package. It will need a little drilling to install.. Package Include A pair of rear roof roll cage bar mount bracket.Not come with install instruction..

Sold as a Pair 2 per Purchase. Aluminum Alloy That will Never Rust. Each Clamp comes with one thick and one thin silicone shim. Use a combination of shim to find the best fit. Note Gasket Trimming and Stacking can allow fitment of a wider range tubes. Mount hole can be easily enlarged by drilling. Drilled location will also never rust. Will fit Tubes with Outer Diameter between 0.95 to 1.2 inch see sizing chart.

Durable Aluminium Alloy MountZidiyoruo UTV Flags Bracket or Whips Mount is made of heavy-duty solid aluminium alloy,It is heavy than standard metal or steel. It won't be out of shape even handle the largest LED whips.. Feature Teeth Inside, Stable Flag and light whip HolderIf you look at many whip amount or UTV flag holder, you'll find that the Zidiyoruo flag mount or flag holder is Special among all flag brakets or LED whips mounts. Because it has teeth inside to hold the bar or roll cage tightly.. 360 Rotation Flag Holder BracketThe flag bracket can revolve 360, make the bracket more flexible.. Universal FitmentThis light whip mount typically used for off-road vehicles such as Can Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, UTV Polaris YAMAHA, 4x4's, Jeeps,etc Where there is a bar at 1.75 to 2 , there is a flag and let whip go upstraight. No difference to install the flag and whip on left or right. Stable and Durable.. Easy InstallationOne package delivery, all hardware included. 5 screws to install it. Once intall it tightly, the whip mount or flag holder will cake your flag and whip to any terrain and maintain a good performance. 1. Universal Fits to Roll Bar from 1.75 to 2 Diameter. Please Must Check Your Car Before Making The Final Decision..

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roll bars, roof racks, roll cages, bull bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation. Color Blue, Quantity 2 PCS.

Protect your whip lightsThe design of the whip lights spring structure can effectively protect your whip lights or antennas from being easily broken when encountering such as low branches, tunnels, eaves, and strong winds, and disperse the huge and concentrated impact force through flexible bending.. Easy to Install DREAMIZER whip lights spring mounting bases don't need to rotate whip lights to fasten the spring base,no need to twist the threads,just remove the original base from the bottom of the whip light and insert the whip light into the upgraded spring base right away,quick installation in one second.. Wide FitmentDREAMIZER this spring base fit for most vehicles,It can be widely compatible with ATV, UTV, Buggy,Off road,Trucks, SUV, Golf Cart, Boat,Sedan, dune buggy,ambulance, pilot car,Motorcycle,such as RZR 1000 ,Can-Am X3,YXZ1000R,Teryx,Wrangler JK,etcNote don't suitable for fat whip lights,please check the size before buying. High Quality and Durablity DREAMIZER Whip Lights Spring Mounting Base is made of heavy-duty spring steel with a sturdy black powder coated finish. high performance of anti-vibration, anti-rust, anti-corrosion, and anti-fracture.Pot-belly style barrel spring increases flexibility and durability and strengthens the middle part to avoid fracture.. Package Includes2pcs Black Whip Lights Spring Mounting Bracket Base,Accessory set,If you have any questions about the whip lights spring mounting base please contact us freely, we will feedback you within 24 hours..

Premium Sturdy BracketEhaho UTV Flag Mount is constructed from solid aluminum alloy, with reinforced thickness in key areas for stronger load-bearing capability and anti-shock. With a coated finish, offering heat and corrosion resistance, and resists rust and dirt. Designed specifically for off-road vehicles, Strong and sturdy. Universal CompatibilityComes with 3 non-slip rubber inserts with a wider range of sizes, perfect fit with 1, 1.5,1.75, and 2 in diameter Round Roll Cages. It helps dampen vibrations and protects your bull bar from being scraped. ideal for Talon, ATVs, UTVs, Trucks, Polaris RZR, Ranger, Can-Am. Multiple ApplicationSimplify the installation with no need for drilling holes in the vehicle body. The hole diameter size of the mounting bracket is 12mm Securely and quickly mount any light to roof racks, bumpers, and roll cages. Ideal for mounting whip lights, Antenna, flags, chasing lights, work lights, and Light bars. 360 Flexible Rotation StableTruck flag mount has a flexible and sturdy 360-degree adjustable serrated engagement structure for different mounting angles. It also has built-in anti-loosening nuts and extended screw length for added stability and secure installation. Easy InstallationDirect bolt-on design, UTV Whip Mount is easy to install with just a few screws to tighten. Comes with all hardware, no need to drill or trim. Once installed, the whip mount or flag holder will hold your flag and whip securely in place over any terrain. Please verify the dimensions of your roll bar before installation.

1.Innovative Design Featuring a novel H-shaped appearance, a bidirectional perforated structure design allowing for varied positioning of different sizes of round tubes, accommodating multiple sizes of roll bars.. 2.Sturdy Construction Crafted from high-density aluminum alloy through die-casting, the four corners tightly envelop the roll bar, providing enhanced overall load-bearing capacity, effortlessly handling heavy-duty aluminum supports on any terrain.. 3.Safety and Stability The L-shaped platform at the light bar mounting position allows for 360-degree rotation, enabling adjustment to different angles. Upgraded with double reinforced triangular structures, it enhances load-bearing capacity.. 4.Multi-Size Compatibility Compatible with round tube diameters ranging from 0.26-0.7 0.7-1.25 inches, fitting a variety of off-road vehicles, including Can Am , Polaris , YAMAHA, ATV and Motorcycle. It can be easily installed on any bar measuring 0.26-0.7 0.7-1.25 in.. 5.Versatile Applications Multiple options for ATV brackets, such as ATV Whip Mount and ATV Light Bar Mount. It can also be installed on the round bars of Motorcycle..

FitmentThe 2pcs whip light mounting brackets fit for 2017-2025 Can Am Maverick X3 and X3 Max,X3 RS Turbor, X3 Max Ds Turbo RR. MaterialMade of solid metal, durable service Black coating finish, consistent with your vehicle, make it outstand in the crowd. Adjustable design, make it meet the needs of various application scenarios. AdjustableKATIMOTO whip lights X3 Mounting Bracket has a 20 adjustable mounting angle for you to adjust the whip light to stand straight up or with a nice slant. InstallationQuick and easy to install. Directly installed on the exit holes on the right left side rear upper pillars with stock bolts. No drilling or cutting. PackageEvery package come with 2pcs flag mount brackets. Perfect for Radios Antenna mounts, Go Pro, Lighted Whips, Fiberglass whips, or anything else..

Aluminium DurableThis whip light mount is crafted from solid, coated Heavy-Duty aluminum alloy and designed with triangular reinforcing ribs at the corner. It is built to withstand tough conditions. 360 AdjustableEasily find the suitable position,The whip light brackets rotates a full 360 degrees with multiple locking points, allowing for precise adjustment of lights or flags. Easy Bolt-On Installation No Drlling Required, Installation is a breeze with the bolt-on design, making it quick and hassle-free. No drilling or modifications are needed, so you can mount it securely on your UTV roll bar with minimal effrt. AdaptabilityThe hole diameter size of the utv whip mount is about 12.2mm0.48inch, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm. Fitmentkemimoto utv whip mount compatible with UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar.

Vehicle Compatibility LED whip light mount fit for Polaris General and Ranger rear bed holes. Provides a secure mounting point for LED whip lights without drilling or welding. Heavy-Duty Steel Build Made from thick stainless steel for enhanced strength and stability. Reinforced structure withstands vibration and off-road impact, keeping the whip light firmly supported. Adjustable Positioning Extended slot design allows sliding adjustment to fit different bed rack widths. Users can easily fine-tune the mounting position for ideal alignment and whip light placement. Protective Powder Coating Black powder-coated finish offers strong resistance to rust and surface wear. Maintains a clean look while providing long-lasting durability for outdoor use. Fast Installation Easy-grip star knob handles simplify the installation process. Quick tightening reduces setup time and eliminates the need for complex tools.

Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. 360 degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us When the trail gets tough, trust the blue mount that stands out. Designed for durability and visibility, its your ultimate safety companion..

Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0 75 1 1 25 It is applicable for roof racks roll cages bull bars handlebars on ATV UTV and trucks. High Compatibility Compatible with various types of light bar brackets the 10mm screw hole diameter fits all light with 8mm mounting screws. Perfect Fit Rubber Inserts Rubber insertsstrip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp Making installation easier and always protecting the metal from being worn down. Built With Quality Clamps are built using precision-welded cast sturdy aluminum makes it lightweight but pretty neat and durable. Make Light Mounting Easier With the high compatible bar clamp youll hassle, free of drilling holes in your vehicle body. Simple all in one kit makes your life easier.

360 dgree adjustment We adopt 360 degree adjustable toothed meshing structure, flexible and strong enough to antishock. In addition, the bracket is also built-in anti-loosening nut inside, more stable and not easy to fall off. Premium Quality Precision-welded from cast heavy duty steel with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket. Fit Size Specially designed for flag antenna whip mounts on all UTVs with 1.5 to 1.75 and 1.75 to 2 Round Roll Cages, such as Polaris RZR, Ranger, Can-Am Maverick X3, Commander, Yamaha, Kawasaki, Talon Pioneer, ect. Easy to Installation This UTV whip lights mount bracket is easy to install, all hardware included, directly bolt-on design, no drilling or trimming. And the mounting angle can be adjusted, you can loosen the bolt and change it to the perfect angle you want. Multiple Application The hole diameter size of the mounting bracket is 12.5mm0.5. You can add anything with a 12mm size to this whip light mount. It can be used as a dune flag mount, whip light mount, chasing light mount, flag pole mount, etc.

CROSS COMPATIBLE - Our whip bases work with 14 and 516 whip poles so there is no need to stress about whether your whip will work with our base. Just insert your new flag pole, tighten the set screw, and hit the road. Simple.. QUICK-RELEASE - Smacking your whip into the top of your garage or toy hauler is never fun. Our whip bases feature a simple quick-release mechanism so you can easily remove the whip for parking, towing, or trailering.. LED WHIP READY - Our quick-release bases are also compatible with all of our LED whips. That means your not limited to just an LED whip or just a flag pole on your UTV. Easily switch back and forth without the hassle of changing bases.. AIRCRAFT ALUMINUM - The trails will test your equipment to the limit. Our whip bases are ready. Machined from 6160 aircraft grade aluminum, theyre more than ready for anything the trail can dish out.. SIMPLE INSTALL - There's nothing better than a simple install. Our bases are about as simple as it gets. We even include all of the needed hardware so you can skip the trip to the parts store. Did easy just get easier Yup..

UTV Flag mountUTV flag mount Also know as UTV whip mount, flag mount clamp, light mounting bracket., UTV flag holder, whip light mounting bracket, UTV bar flag mount, flag pole holder, light bar mount, gives your off-road vehicle the extra touch. It is a good Practical Christmas Gift for Men Women in the special holiday season if he or she loves off-road life.. A way to mount two whips on your UTVUpgrade your Polaris General or Ranger with a set of colorful LED whip lights quickly and easily with ZIDIYORUO's UTV whip mounts, to show off your flair no matter where you travel.. 360-degree rotationZIDIYORUO UTV whip flag mount designed with 12 Pins so as to make it stable even riding in harsh terrain and you can adjust proper angle to fit the Vehicle.. Solid heavy duty aluminium alloy UTV mountsZidiyoruo is famous for UTV whip mounts because of its quality, all heavy duty Aluminum made, the UTV mounting brackets is good to hold flag whip, spots light. Easy InstallationOne package delivery, all hardware included. 3 screws to install it. Once intall it tightly, the whip mount or flag holder will take your flag and whip to any terrain and maintain a good performance..

Compatible with Can Am Commander Compatible with Talon 1000. The whip light mounting bracket can be mounted on a 1.75 to 2 roll bar. Made of high quality aluminum alloygreat for all weather conditions.. Easy to install, directly bolt-on design, no drilling or trimming.. 2 wrenches included, no additional tools required.

Mutil FunctionUTV whip mount also know as UTV flag mount,whip light mounting bracket,UTV flag holder,light bar mount.This will give your off-road vehicle a different feel When you are driving in rugged forests, windy deserts, snow, install flags or whip lights on your UTV to make sure you are noticed and give your ride added safety and visibility. StabilityUnlike the 12-pin design on the market, our UTV whip mount is a serrated and single-hole design that eliminates the need for multi-hole alignment. 360 rotatable design, you can freely adjust the desired angle.The internal design is also serrated to hold whip lights, light bars, flags and will not slip off easily. Strong Materials Addsafety heavy-duty UTV whip mounts are made of premium aluminum alloy with anti-rust paint surfaces that can be dustproof, scratch resistant, corrosion resistance, not easy to fade, and durability.. Universal Fitment whip light mountThis light whip mount fit for all 1.75-2 roll bar or roll cage. It is typically used for off-road vehicles such as Can-Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, ATVUTV Polaris YAMAHA, 4x4's, etcPlease Must Check Your Car Before Making The Final Decision.. Easy Installation mount for SXS flags2pcs of SXS flag mount packed into a package with all mounting hardware.Installation is complete in three minutes, and once installed whip light mount or flag mount will take your flags and whip lights to any terrain and keep them performing well. We provide installation videos..

Easy Installation.. Durable black powder coat finish.. 316-inch laser cut steel.. Backed by Rough Country's Lifetime Warranty..