Multiple Reticle System PMD504 red dot sight featuring three reticle options the classic 2 MOA dot, the 62 MOA circle and their combination circle-dot reticle that allows for fast target acquisition.. 10 Illumination Settings 10 bright settings, fully multi-coated that increase light transmission and clarity in any environment.. Shake Awake After about 225 seconds without sensing any motion, the sight will enter into sleep mode. Even the slightest movement will wake it up to the previous brightness setting.. Convenient Tray Battery CompartmentThe readily available CR1632 battery is side-loading, allowing for quick battery replacement without having to remove the sight from the firearm. No more Re-zeroing.. Built To Last 1x24mm Compact Micro Red Dot Sight housed in durable yet lightweight aircraft-grade aluminum for use in any environment.IPX7 waterproof, fogproof and shockproof construction.. IMPORTANT NOTES The PMD504 is compatible with RMR footprint, please make sure you have the RMR cut slides on your handgun, otherwise, you may have to find the correct adapter plate to fit this optic..

For Glock 43X48 MOS Hellcat OSPPRO with the RMSc optic cut to mount a Holosun 407K507K, No need to modify the slide.. Fully support recoil posts design, durable, reliable.. .058 thick,ultra Low Profile and lightweight, Easy to install.. Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish, mounting hardware included.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

COMPLETE 32-PIECE SET Includes 8 common optic mount screw types 4 of each size for broad fitment across adapter plates and optic-ready mounting interfaces.. PRE-APPLIED THREADLOCKER Each screw comes with blue threadlocker pre-coated for secure mounting and worry-free installation under recoil conditions. PREMIUM CONSTRUCTION Made from carbon steel grade 12.9 with black oxide finish for superior strength and corrosion resistance, ensuring long-lasting durability. TSA Quality Assurance Engraved TSA branded head for authenticity and confidence in fitment.. Compatible Optics Fits leading red dot brands and footprints including Trijicon RMR, SRO, Holosun 407C507C508T407K507K507COMP, Vortex Venom Viper, Leupold DeltaPoint Pro, Shield RMSRMScSMS, Aimpoint ACRO, Docter Noblex, Vector Optics FrenzyParagonMaverick, AmeriGlo Haven, LibertyJustice, Primary Arms Mini Reflex, Riton X3 Tactix PRD, ADE RD3 Series, and many others.. Compatible Pistols Works with leading optics-ready pistols including Springfield Armory Hellcat Echelon, Smith Wesson MP 2.0, Equalizer Shield Plus, Walther PDP Series, FN 509510545502 Tactical, CANIK METE TP9 Series, CZ P-07P-09P-10 Shadow 2, Taurus GX4 T.O.R.O. TX22, HK VP9VP40, Beretta 92XAPXM9A4, Ruger Max-9, SCCY CPXDVG, Stoeger STR-9 Series, Staccato Models, Rock Island STK100, IWI Masada, Lone Wolf Dusk19, and more.. Not for GLOCK or SIG SAUER For those models, see TSA-SK-0001 GLOCK and TSA-SK-0002 SIG SAUER..

A 6 MOA red dot built for modern everyday carry, the micro-sized Defender-CCW delivers maximum concealment, reliability, and the quickness you need. The slim profile means no extra bulk or width for a smoother, no-snag draw.. Meant for those who prioritize personal protection, the Defender-CCW is a complete redesign from our current MRDS and lets you carry more discreetly. It will fit all Shield RMS and Shield RMSc footprints without any modification.. Motion activation automatically wakes up the red dot for use while the 14 hour auto-shutoff preserves battery life. The fast-rack textured front face adds grip for racking slide off of any surface.. The large, aspherical lens provides a class-leading sight window larger than Viper and Venom MRDS for a distortion-free sight picture and truer colors. A brilliant, illuminated dot helps you lock on target faster and more accurately, even in low light.. Waterproof, shockproof and with ArmorTek coating protecting the lens, the Defender-CCW is ultra-durable. The ShockShield polymer insert absorbs everyday impacts and brings increased toughness.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

COMPATIBLE WITH Springfield XD, XD MOD.2, XDS, XDM, Pistol. NOT FIT 5.25 XDM competition series and ALL OSP Models. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. Update to 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.no more need shim Installation hardware and tools included.. Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

Vortex Pro 1 inch cantilever ring mount provides the correct height and forward placement for proper scope mounting.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA..

Version 3 modified the dovetail to make it more sturdy and easy to install. Precision CNC Machined from 6AL4V aerospace grade Titanium with black PVD finish.. 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

For piggyback mounting of red dot sights as a secondary sighting system directly to your rifle scope tube. Allows for fast transition between your rifle scope and a 1x power red dot optic for use at closer ranges. Micro red dot mount compatible with Vortex VenomViper, Burriss Fastfire 23, TRUGLO TRU-TEC, UTG Micro, and all DocterNoblex footprint pattern red dots. Please refer to compatibility chart before purchasing.. Ring mount fastens around your scope tube, installing via two set screws and included hex key. All Monstrum mount and accessory products are backed by a lifetime guarantee.

? The charging cover has a percentage battery display for you to monitor the battery level of both the charging cover and the optic anytime. The well-built cover can also protect your optic from dust and scratches when it's stored in your strong box warehouse. - On a single charge, the optic itself can last over 70,000 hours on its lowest mode. Even at its brightest setting, it can continuously run for over 17 days and this duration can be extended to over 70 days with the support of a fully charged charging cover. Featuring a 0.94 in x 0.85 in lens, the optic ensures accurate target acquisition even during recoil. ? The dot is clear and easy to locate, ensuring swift and precise dot acquisition. ? The optic can be easily zeroed at 15-yard, 25-yard, or 30-yard distances with windage and elevation adjustments. The default zeroing distance is 25 yards. ? The OLIGHT Osight allows you to wake your optic in an instant. The optic turns off automatically after 10 minutes of inactivity. - By adopting the most common industry-standard mounting footprint Ruggedized Miniature Reflex for optic cuts, Osight ensures versatility and ease of integration. 10 for daylight and 2 for night. The cover is USB-C rechargeable, while the optic is charged magnetically. A fully charged cover can charge a low battery optic three times.

ABSOLUTE COWITNESS - Best for using Micro Red Dots on Modern Sporting Platforms - Also compatible with Vortex Venom and Burris Fastfire Red Dot Sights. CANTILEVER DESIGN - The angled, single-rail mount keeps the red dot forward for fast target acquisition. LIGHT WEIGHT - At only 1.1 oz, this is one of the lightest red dot risers out there. INSIDE THE BOX - Includes Allen wrench for tightening the riser to a picatinny rail. LIFETIME WARRANTY - AT3 Tactical stands behind its products. If you experience an issue, we will make it right..

CUSTOM FIT FOR GLOCK MOS - Precision-engineered for Glock MOS platforms, this mounting plate is compatible with Glock 19, 17, 45, 47, and other full-size or compact Glock MOS models Designed for a perfect fit, it ensures secure optic alignment and reliable performance. DPPROMEO PRO OPTIC COMPATIBILITY - This Night Fision mounting plate is compatible with the Leupold Delta Point ProRomeo Pro and other red dot optics with the same mounting footprint. CO-WITNESS SIGHT PAIRING - The DPPRomeo Pro optic mounting plate pairs best with Night Fision 469-494 blade height backup sights, achieving proper lower 13 co-witness for reliable backup sighting under any condition. PROFESSIONAL GRADE CONSTRUCTION - Made from 17-4 stainless steel and finished in black nitride, this mounting plate is strong, corrosion-resistant, and durable Measures just 0.2 thick and machined to tight tolerances for optic alignment and recoil resistance. ALL-IN-ONE SETUP - This kit includes optic-specific screws and an installation tool for streamlined mounting A scannable QR code links to Night Fision's Optic Sight Pairing Guide, offering step-by-step guidance for optimal co-witness setup.

Use this cantilever mount for mounting 34mm tubes.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base..

ACCURATE - Sharp 3 MOA Red Dot multicoated lens keeps your view clear on-target, without the deep blue tint found in other compact sights. Tactile click adjustments for easy sight-in.. ADAPTABLE Perfect for rifles, shotguns, pistols. Top-loading battery and picatinny mount included. Compatible with Burris Fastfire Vortex Venom mounts and handgun slide adapters.. LIGHTWEIGHT, BIG VIEW Compact design weight of only 1.8oz. Extra-large field of view for quick target acquisition.. DEPENDABLE - Waterproof with sealed electronics IPX67. Lifetime Warranty. Shockproof components to unfailingly maintain zero. Stealthy, scratch resistant matte anodized finish.. INSIDE THE BOX - ARO Red Dot Sight, Rubber Lens Cover, CR1632 Battery, Low Picatinny Mount, Instruction sheet, Lens cloth, Allen wrench for Windage Adjustment, Torx Wrench for Mounting Screws, Flathead Screwdriver for Battery Cap.

This diving board mount provides the perfect mounting height and positioning for the Vortex Impact 4000 Rail Mounted Ballistic Laser Rangefinder, red dots, and other picatinny mounted accessories. Made in the USA.. Vortex Precision Diving Board Mounts are machined with certified USA7075T6 billet aluminum, held to an extremely tight tolerance of .0005 and anodized with Type III hardcoat.. Compatible with Vortex Precision Matched Rings and Precision Extended Cantilever Mounts.. Height 1.36 34.5mm, Weight 2.1 oz 59.5g. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Dovetail micro red dot mounting plate for use wth Glock models 17 19 20 21 22 23 34 35 40 41 45 47. Not for MOS version Glock pistols. Not compatible with Slimline Glock 43x or 48 pistols.. Compatible with DocterNoblex footprint standard red dots including Vortex VenomViper and Burris Fastfire 23. Not compatible with other model red dots. Please refer to the compatibility chart graphic before purchasing.. The plate installs seamlessly into the dovetail slot at the rear of your slide in place of your fixed rear sight. Requires removal of your fixed rear sight using a sight pusher tool.. Made from hard anodized 6061 grade aluminum. Recommended torque specs 15 inlbs.. All Monstrum mount and accessory products come with a lifetime guarantee.

Micro Red Dot The VOTATU PMD504-SR is a open reflex sight for RMR footprint cut pistols and picatinny rail mount. Featuring a red 3 MOA aiming dot with a 24mm window for quick acquisition.. 10 Illumination Settings 10 bright settings, fully multi-coated lens that increase light transmission and clarity in any environment.. Shake Awake Function After about 225 seconds without sensing any motion, the sight will enter into sleep mode.Even the slightest movement will wake it up to the previous brightness setting.With up to 50,000 hours of battery life.. Convenient Tray Battery Compartment The readily available CR1632 battery is side-loading, allowing for quick battery replacement without having to remove the sight from the firearm.No more Re-zeroing.. Built To Last This PMD504-SR Reflex Sight housed in durable yet lightweight aircraft-grade aluminum for use in any environment.IPX7 waterproof, fogproof and shockproof construction.. IMPORTANT NOTESThe PMD504 is compatible with RMR footprint , please make sure you have the RMR cut slides on your handgun, otherwise, you may have to find the correct adapter plate to fit this optic..

NoteCompatible with RMR and SRO red dot.Not available for RMRcc or other red dot.also not fit romeo zero rmr. Lengthmm45 Widthmm32 Heightmm11Weightg30. Humid environment may cause rust, please keep it properly. If there is a problem of rust after receiving the product, please contact us to replace it in time.. Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize. Also suitable for RMR SRO similar red dotBut I hope you pay attention to the size of red dot..

The Venom Enclosed Micro Red Dot combines ruggedness with simplicity ensuring optimal maneuverability and handling. Easy to mount and compatible with a DeltaPoint Pro footprint, it delivers enhanced reliability and function.. Simple, intuitive controls with top-mounted buttons and a convenient side-load battery allow for easy adjustments and replacements. Motion activation with a 10-minute auto-shutoff helps to save battery life.. Features a red dot with 12 adjustable brightness settings 10 for daylight and 2 night vision-compatible for clear, precise aiming in any lighting condition.. An aspherical lens and large viewing window offer a clear, distortion-free sight picture with truer colors and fast target acquisition.. Durable 6061 aluminum housing protects against debris, moisture, and impact. Waterproof, fogproof, and shockproof for maximum durability in harsh environments.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Include 4 custom .390 Length High Strength Mounting Screws Compatible with Trijicon RMR Mounting on Glock MOS and most Optics-Ready pistol. Ensure Maximum Thread Depth Engagement.It has a smooth surface finish that makes it more tightly contacted with the bottom seal, Allows your sight to be submerged up to 66ft for up to 1 hour without leaks. Works with direct pistol slide mounting and all other aftermarket pistolsrifle mounts Some cut slide use 4-40 screws, the screws come with this kit will not fit.This kit is NOT FIT copycat red dots.. Greatly reduces the chance of your reflex sight battery losing connection resulting in flickering or temporary loss of your sight's reticle. The Anti Flicker Plate utilizes a raised protrusion directly under the battery to create upward pressure ensuring a reliable battery connection.. The kit includes 1X regular sealing plate,1X anti-flicker sealing plate, 4X custom .390 Length Screws short and 1X Hex Key.. Made from 304 stainless steel with Black finish.100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

We improved the quality of our products that the height of recoil stops, and it more fit Holosun 407K507K,CTS-1550 and Romeo zero. Easy to install. 100 MONEY-BACK warranty within 30 days of purchase. NO QUESTIONS ASKED.. The kit includes 1X mount plate, 6X Screws and 2X Hex Key.. Compatible with Crimson Trace Red Dot. Maximum torque, lbfin 7.97Using a torque wrench to make sure you didnt over-tighten the screws stripped..

Red dot adapter plate for Gen 4 Gen 5 optics ready MOS full sized or compact Glocks for mounting of DeltaPoint Pro DPP footprint red dots. Compatible with optics ready MOS Version G17, G19, G22, G23, G34, G40, G41, G45, and G47 NOT compatible with Non-MOS version Glocks or with Slimline MOS version G43xG48 Glock pistols. Not compatible with other pistols.. Compatible with Leupold DeltaPoint Pro DPP footprint red dots including Holosun SCS 320 Sig Romeo-X PRO X PRO Enclosed Eotech EFLX Bushnell RXS-100 RXS-250 Vortex Defender ST XL Venom post 2025. Monstrum Real Steel Series mounts are crafted from stainless steel and electrolysis treated for corrosion resistance. Steel is a more durable material than aluminum, providing 1 more rigidity against recoil 2 more resistance to extreme temperatures and 3 less susceptibility to stripping.. All Monstrum products are backed by our lifetime guarantee.

FITS RUGER 57 5.7 ONLY This plate is for Ruger 57 Ruger 5.7 pistol ONLY, it does NOT fit any other pistols. Please note Ruger 57 and Ruger 5.7 are the same pistol. Designed specifically to replace the factory cover plate, ensuring secure fit and alignment with compatible red dot sights.. RED DOT COMPATIBILITY The plate is compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray, Trijicon RMRSRO, Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, KingslayerLibertyJustice.. HARDWARE INCLUDED Screws are provided for Trijicon, Holosun 407C507C and ADE. The provided screws may NOT work with other red dots listed. If not, we recommend getting the right size screws from a local hardware store.. NOT FOR OTHER FOOTPRINTS The footprint of this plate is NOT compatible with other red dot sights such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Sentinel, ADE Spike, Holosun 407K507K.. DURABLE CONSTRUCTION Precision machined out of 6061 aluminum for long-lasting strength and stability. Weighs only 0.4 oz, adding minimal bulk. Due to the added weight of larger red dot sights like the RMR, using 40 grain ammo may be necessary for proper cycling and reliable performance..

Dovetail red dot mounting plate for use wth non-optics ready Glock pistols. Compatible with Leupold DeltaPoint Pro DPP footprint pistol red dots.. Slots seamlessly in place of your fixed rear sight. Requires removal of your fixed rear sight using a sight pusher tool.. Compatible across all Glock models 17 19 20 21 22 23 34 35 40 41 43x 45 47 48. Not for optics ready MOS version Glocks. Not compatible with other pistol models.. Compatible with Leupold DeltaPoint Pro DPP footprint red dots including Holosun SCS 320 Sig Romeo-X PRO X PRO Enclosed Eotech EFLX Bushnell RXS-100 RXS-250 Vortex Defender ST XL Venom post 2025. 7075 Series plates are crafted from 7075 grade aluminum. Most consumer grade gun accessories are made from 6061 aluminum. 7075 aluminum is lightweight like 6061 aluminum yet rates significantly stronger in terms of Brinell Hardness, Tensile Strength, and Shear Strength..

Lightweight Optic Mount PlateWeight23.5g0.82oz. The bottom is made of steel, and the periphery is made of hard alumina.. Ventilated ribs widthFits 0.236 in.6mm to 0.395 in.10mm ventilated ribs width. CompatibleRed dot Optic-cut Compatible with VortexViperBurris FastfireDocter ect.. Only fit Original Open Venom, not fit New Enclosed Venom.

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a rifle.. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used.. This mount positions the center of the riflescope tube at a height of 1.45 inches 37 mm from the top surface of the Picatinny base.. The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Weighs 8.9 ounces. Made with pride in the USA.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 2245 pistol. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Also fit Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots.. Mounting hardware comes with screws and allen wrench. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Mounting hardware comes with screws and allen wrench. Aircraft grade Aluminum in Matte black finish. Mounting hardware comes with screws and allen wrench. We are learning that depending on the date of production batches of the ruger mark series, some pre-drilled holes are slightly shortershallower. If so, please contact us, we will send you shorter screws. We are in the process of adding shorter screws, but it is not factory included til next production.. This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user to co-witness the rear sight..

ELEVATION CONTROL FOR SIGHT ZEROING Precision 1 Delrin shim fits between your red dot optic and mounting plate, allowing fine-tuned elevation adjustments. Flip orientation to raise or lower the dot, solving alignment issues during zeroing without returning your optic.. SAVE YOUR SIGHT, DONT RETURN IT If your red dot maxes out its elevation adjustment and still sits too high to zero, this precision shim offers a practical fix. By slightly raising the optic, it allows the illuminated dot to move lower within your sight pictureno need to return a working red dot as defective.. FITS POPULAR MICRO OPTICS Precision-fit shim made for footprints including Vortex VenomViper, Burris Fastfire IIIII, Docter, Insight, Meopta, EOTech MRDS, Sightmark Mini Shot, Hex Dragonfly, Leica Tempus, and ADE RD3-006, 009, 011, 012, 013, 015028. DOES NOT FIT Holosun, Trijicon RMR, Shield, or Romeo Zero.. ELEVATION FIX FOR HARD-TO-ZERO DOTS Some optics cant adjust low enough to zero, even when the screw is maxed out. This 1 delrin shim lifts the optic just enough to bring the dot into alignment. Taper 1.0, Tolerance .005 for precision correction.. EASY INSTALLATION WITH FLEXIBLE FIT Installs between red dot and mounting plate in minutes. Position the thicker side toward the rear of the slide to lower the dot. Position the thicker side toward the front of the slide to raise the dot. If center screw holes are slightly off on some optics, simply widen the hole as needed for a secure, flush fit. No need to return or replace your sightjust fine-tune and go..

The Venom Red Dot Sight-3 MOA promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it.. High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels.. The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers. Parallax Free. 1 MOA wind age and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.. The Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility.O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.

Compatible with Burris Sightmark Vortex Red Dot Sight. It is equipped with a movable dovetail, which is easy to install and made of steel. Including the necessary screws and wrenches for installation. Note Not fit for RMR, RMS, DOCTOR.

PRECISION PICATINNY RAIL MOUNTING This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. ADDITIONAL COMPATIBILITY This plate also fits the following Canik and Taurus non-optic ready models Canik TP9 SA, TP9 SF, TP9 SDdoes not fit SFX, COMBAT, SFT, Mete. AND Taurus TX22 Gen 2, GX4, and G3C with newer factory steel sightsdoes not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111. These Canik and Taurus pistols share the same rear sight dovetail dimensions as standard Glock models, which makes the this plate compatible without modification.. RUGGED ALUMINUM BUILD FOR LONGEVITY Made from high-quality aluminum, this picatinny mount plate withstands recoil and heavy firing. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. COMPATIBLE WITH POPULAR RED DOTS Two Picatinny rail slots accept any red dot mounted on a Picatinny plate. Models like Vortex Venom, Burris FastFire and ADE RD3 include Picatinny mounts and attach directly. Note Holosun and Trijicon RMR often do NOT include Picatinny plates users must purchase the plate separately.. EASY INSTALLATION WITH BUILT-IN SCREW HOLE This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k, Holosun EPS Carry footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and DDP have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

G-lock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile. Fit these micro red dots Vortex RazorViperVenom micro red dot. Fit Burris Fastfire micro red dot some burris might require longer screws which is not included. Fit Ade Advanced Optics rd3-001, rd3-02, rd3-009 And similar MicroCompact style mini Red dot sight. Replace the rear sight slot with mini red dot base plate. Note Not fit for RMR, RMS, DOCTOR..

Gotical Super Slim Mounting Plate Red Dot.

The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.. The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.. Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex VenomViper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots. Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c507c, ADE RD3-020, RD3-023. Also works with Holosun 407k507kESP red dots. Compatible with Any red dot with footprint of Shield RMSRMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.

PRECISION PICATINNY RAIL MOUNTING This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. ADDITIONAL COMPATIBILITY This plate also fits the following Canik and Taurus non-optic ready models Canik TP9 SA, TP9 SF, TP9 SDdoes not fit SFX, COMBAT, SFT, Mete. AND Taurus TX22 Gen 2, GX4, and G3C with newer factory steel sightsdoes not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111. These Canik and Taurus pistols share the same rear sight dovetail dimensions as standard Glock models, which makes the this plate compatible without modification.. RUGGED ALUMINUM BUILD FOR LONGEVITY Made from high-quality aluminum, this picatinny mount plate withstands recoil and heavy firing. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. COMPATIBLE WITH POPULAR RED DOTS Two Picatinny rail slots accept any red dot mounted on a Picatinny plate. Models like Vortex Venom, Burris FastFire and ADE RD3 include Picatinny mounts and attach directly. Note Holosun and Trijicon RMR often do NOT include Picatinny plates users must purchase the plate separately.. EASY INSTALLATION WITH BUILT-IN SCREW HOLE This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k, Holosun EPS Carry footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and DDP have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

PRECISION-FIT ADAPTER PLATE -This adapter plate mounts mini and micro red dot sights onto certain NON-OPTIC READY SW pistols that does NOT has an optic cut. The optic plate basically replaces the factory rear sight.. FITS MULTIPLE SMITH WESSON MODELS Compatible with MP Full Size, MP 2.0, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE, SD40VE, and MP Shield. This mount is for NON-OPTIC READY models that does NOT has a optic cut. Simply replace the rear sight and secure for a stable optic mount.. IMPORTANT INSTALLATION NOTICE This aftermarket mounting plate is not simply plug and play. ADE recommends installation by a qualified gunsmith. Unprofessional installation may cause loose screws, loss of zero, damage to the firearm or optic, and possible personal injury. Proper fitment and installation are essential for safe use.. NOT COMPATIBLE WITH MP C.O.R.E. Series already optics-ready, MP Shield EZ .380, MP .22 Compact, SW9VESW40VESigmaSW9SW40, Shield Plus, and any pistol that is factory optics-ready. Please check your pistol model before purchasing. This mount does NOT fit any optic ready models.. COMPATIBLE WITH RMSC FOOTPRINT OPTICS Fits ADE RD3-018 SPIKE, RD3-021 NUWA, Holosun 407K, 507K, EPS Carry, Osight SE Enclosed, Vortex Venom Enclosed, Defender CCWST, Burris Fastfire C, Shield RMScRMS, Sig Romeo Zero, JPOINT4, Swampfox Sentinel, CT1550, and Riton X3 Tactix MPRD.

Dovetail Mounting Compatibility Dovetail micro red dot mounting plate for use with Glock models 17 19 20 21 22 23 34 35 40 41 45 47. Not for MOS version Glock pistols. Not compatible with Slimline Glock 43x or 48 pistols. RMR Footprint Compatibility Compatible with RMR footprint standard red dots including Holosun 407C507C508T. Not compatible with other red dot footprints. Please refer to the compatibility chart graphic before purchasing. Seamless Dovetail Installation The plate installs seamlessly into the dovetail slot at the rear of your slide in place of your fixed rear sight. Requires removal of your fixed rear sight using a sight pusher tool. Durable Aluminum Construction Made from hard anodized 6061 grade aluminum. Recommended torque specs 15 inlbs. Ultra Low Profile Design Features 2mm width for ultra low profile mounting, allowing for use of an electronic red dot sight for improved visibility and faster target acquisition.

PRECISION FIT ADAPTER PLATE FOR RUGER MARK SERIES This red dot mounting plate is engineered to attach securely to Ruger Mark pistols using factory top holes, creating a stable optic mounting solution without slide modification or removal of original components.. UNIVERSAL FOOTPRINT FOR RUGER MARK I II III IV MODELS Designed specifically for Ruger Mark I, Mark II, Mark III, and Mark IV pistols, this red dot adapter plate supports a universal footprint for compatible micro red dot optics while maintaining proper alignment and balance.. SECURE MOUNTING WITH INCLUDED HARDWARE AND TOOL Built with precision machining, this red dot mount includes mounting screws and tool to ensure a tight, reliable fit, helping keep your optic stable through regular use and repeated adjustments.. EASY INSTALLATION WITH CLEAR HOW-TO USE DESIGN To install, align the adapter plate with the existing holes on the Ruger Mark receiver, secure it using the included screws, then attach your red dot optic following the optic manufacturers mounting instructions.. LOW PROFILE DESIGN FOR NATURAL SIGHT PICTURE The slim profile keeps the red dot sight positioned close to the receiver, delivering a clean sight picture and comfortable shooting experience while maintaining the original balance of the Ruger Mark platform..

COMPATIBILITY Designed for 1911 pistols with Novak cut, compatible with Vortex Viper, Venom, Docter, Noblex, 407K, and 507K red dot sights.. DURABLE CONSTRUCTION Crafted from high-grade aluminum, this mount plate delivers a lightweight yet sturdy platform weighing just 20 grams.. SECURE FIT Precision-machined design ensures a snug, reliable fit on your 1911 slide, keeping your red dot sight firmly in place.. SLEEK FINISH Features a black anodized finish that blends seamlessly with your firearm for a clean, professional look.. EASY INSTALLATION Straightforward mounting process allows for quick and hassle-free attachment of your preferred red dot sight..

UNIVERSAL COMPATIBILITY Mount plate designed for 1911 with Novak cut, FITS NOVAK CUT 1911 5 IN 9MM .40SW,compatible with Vortex Viper, Venom, ADE, Docter, and Noblex red dot sights. DURABLE CONSTRUCTION Crafted from high-grade aluminum material for long-lasting durability and reliable performance in tactical applications. PRECISION FIT Engineered specifically for secure mounting on 1911 platforms, ensuring a stable and accurate sight picture for improved target acquisition. COMPACT DIMENSIONS Package measures 0.5 x 0.2 x 0.2 inches, providing a low-profile mounting solution that maintains the sleek profile of your firearm. COMPLETE PACKAGE Includes mount plate with all necessary components for installation, backed by a one month return policy for customer satisfaction. fit Sig Sauer 1911 CompactSpringfield 1911 EMP Champion CC ContourSAO Compact Pistol Chambered in 9mm Luger,Tisas 1911 Raider .45Ruger 9ESW 19111911 springfield operatorRIA 1911Rock Ultra FS HC 10mmGSG 922Springfield 1911 loaded1911 EMP1911 with novak. MOUNT Plate fit Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Holosun 507K 407K, Romeo Zero, DocterNoblex Sight C sight 2 sight III, DocterNoblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec M-Spec, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, or Vomz Pilad 120 optics. The JPoint, Shield RMSc, Romeo Zero, Holosun 507K, Holosun 407K, and Sightmark Mini mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. .

Universal Compatibility Designed specifically for Taurus G3C, G3, G3X, G3XL, GX4, and Toro 9mm pistols, providing a secure mounting platform for various optics. Wide Optic Support Compatible with ADE DocterNoblex, Vortex Viper, Burris Fastfire, and micro red dots with 407K507K footprints for versatile sight options. Durable Aluminum Construction Manufactured from high-grade aluminum metal for lightweight strength and long-lasting durability in demanding shooting conditions. Precision Mounting Base Engineered to provide a stable and secure platform for red dot sights, ensuring proper alignment and consistent zero retention. Easy Installation Includes necessary mounting hardware and tools for straightforward installation on compatible Taurus pistol models. The JPoint, Shield RMSc, Romeo Zero, Holosun 507K, Holosun 407K, and Sightmark Mini mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. . MOUNT Plate fit Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Holosun 507K 407K, Romeo Zero, DocterNoblex Sight C sight 2 sight III, DocterNoblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec M-Spec, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, or Vomz Pilad 120 optics.

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Sig Sauer Standard P365 Handgun.. Only fits Sig Sauer standard P365 Model. It does NOT fit P365XL which is already Optics Ready.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

Compatible with Glock vortex venom viper burris fastfire ade NOT FIT Counterfeit sights. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.. Precision CNC Machined from 7075T6 Aluminum with Black anodized finish.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

This Optic mount is designed to connect certain red dot optics to 1911 pistols with Novakdoes NOT fit Novak OVERSIZE rear sight cut. One of the advantage of this ADE plate over others is this optic plate has a CURVEDCONCAVED design that will sit flushwrap the top curved pistol slide on the top of the pistol. Many other plates are Flat design.. 1911s have several different rear sight dovetail cuts, such as ColtG.I. Standard, LPA, Novak standardtraditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standardtraditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.. Does NOT fit any Novak cut that is NOT GENUINEtraditionaltrue Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark MinishotCoreshot, Crimson Trace CTS-12001300 and similar red dots. Does NOT fit Trijicon RMR, DeltaPoint Pro, Shield type red dot footprint.. Installation screws are included for working with Vortex Venom, Burris Fastfire and ADE RD3. The screws provided might be too shorttoo long for some red dots that match the same footprintscrew hole of this plate, such as sightmark Mini Shot M Spec. We recommend going to a local hardware store such as ACE Hardware to get the right size. Please be prepared to purchase longershorter screw separately for other red dots brands such as Sightmark, Meopta, Doctor, Bushnell..

FITS SIG P320 M17M18 WITH LCI This brand new designed optic mounting plate is designed to fit Sig P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR and has two holes for plate's two teeth for the plate to insert to. CHECK X-CARRY COMPATIBILITY FIRST It also fits XCarry ONLY IF it has a loaded chamber indicator. Some XCarry does not have a loaded chamber indicator, then this plate does NOT fit it. Inspect your XCarry fully before purchasing.. DOES NOT FIT STANDARD OR MILITARY P320 VERSIONS This plate does NOT fit Standard Sig P320, Sig P320 Military SurplusMil Spec version, Sig P320 RX.. WIDE RED DOT COMPATIBILITY Fit Ade RD3-006A Huracan, RD3-006B Python, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red dots, iShot, and similar red dots. Also fits Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Min. GUNSMITH INSTALLATION REQUIRED This optic plate requires removal of the rear sight and disassembly of the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note Unprofessional installation such as improper torque will result in screw loosening, loss of zero, damage to the firearmoptic, and potential personal injury..

This handy mount quickly attaches the venom red dot to your rifle while ensuring the correct lower 13 co-witness sight height.. The positive lock, one-handed operation makes it incredibly simple to use.. Type III hard-anodized machined aluminum construction keeps the package lightweight, tough, and durable.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Instantly switch from long-range to close-range with no need to grip or head shift needed. Compatible with DeltaPoint Pro and Micro T-2 footprints.. Mount a red dot sight without adding bulk, while leaving room for lights and other essential gear.. The 45 offset design provides fast access to backup opticsperfect for dynamic environments.. Weighs just 1.48 oz and installs securely on any Picatinny rail for a lightweight, low-profile setup.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Steyr A1 Handgun.. compatible with S-A1 C-A1 M-A1 L-A1 M9-A1. Fitment on A2 is not guaranteed due to different Rear sight dovetail dimension.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable, lightweight, low profile.. This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex. ViperVenom micro red dot sight. Fits Burris Fastfire micro red dot sight Notes the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot. Replace the rear sight slot with mini red dot base plate. Note Not fit for RMR, RMS, DOCTOR.. Attaches firmly to your firearm for sure performance in tactical situations..

Pistol mount plate fits 17 19 22 23 26 27 34.. Fits Vortex ViperVenom micro red dot sight. Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight. Fits Burris Fastfire micro red dot sightNotes the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot. WO WOLTIS,Caution NOT fit RMR, RMS, Doctor..

Easy to install -- Replace the rear sight slot with mini red dot base plate Caution NOT fits for RMR, RMS, DOCTOR.Size 1.81X1in. Pistol mount plate fits G17 19 22 23 26 27 31 34 35.. Suitable Mini Red Dot Sight -- Fits Vortex ViperVenom micro red dot sight, designed for rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight.. Special Pistol Mount -- Fits Burris Fastfire micro red dot sight Notes the screws included are not long enough for some Burris red dot, pls use the screws in the red dot.. Highest Quality Material -- Full metal, heavy duty, made of 6061 T6 aluminum alloy in durable black matte finish..