1 Inch Scope Mount CVLIFE 1 scope mount is suitable for scopes with a diameter of 1, the spacing between the rings is 2.36, the center to base height is 1.57, base length is 3.. Hold Well Zero Two screws on each side of the ring provide a recoil-resistant grip to your scope, with great alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.. Offset Cantilever Mount Scope mount features a 2.4 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.. Lightweight Material This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesnt add much extra weight to you.. Torx Screws Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life..

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 54 Inches 39. 1 mm from the base. Sold two rings per package.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Pica tinny Rails. Weight Per Ring 53. 8 Grams - 1. 9 oz.

The Venom 5-25x56 First Focal Plane MOA riflescope is built for long-range and competition with a 5-25x mag range built into a 34mm tube for a massive amount of turret travel 85 MOA max elevationwindage.. XD Optical System delivers impressive resolution, edge-to-edge sharpness and greatly reduces chromatic abberation. Fully multi-coated lenses provide superior light transmission for exceptional clarity and low-light performance.. The RevStop Zero System offers an easy to set, fast and reliable return to zero. Side knob parallax adjust allows quick and easy parallax adjustments with range numbers visible while in the shooting position.. EBR-7C reticle ensures subtensions are accurate throughout the mag range making it easy to measure and range targets.The fast focus eyepiece allows for easy reticle focusing while the included throw lever allows for fast transitions between magnifications. Nitrogen purged and o-ring sealed providing water and fogproof performance. Armortek coating protects the lenses from scratches and oil. The one-piece, aircraft grade aluminum, 34mm tube is shockproof, shrugging off recoil and other impacts..

The 1-4x24 Crossfire II riflescope is one of many configurations in the Crossfire II line. The V-Brite reticle uses the V-Plex format with battery-powered electronics to illuminate the center dot for huntersshooters during extra-low light conditions.. With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. The fast focus eyepiece allows quick and easy reticle focusing.. Anti-reflective, fully multi-coated lenses provide bright and clear views for the user. Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.. A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fogproof performance.. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces..

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.26 inches 32 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.. This mount positions the?center?of the riflescope tube at a height of 1.45 inches 37 mm from the top surface of the Picatinny base.. The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish.. Weighs 8.9 ounces. Made with pride in the USA..

The Strike Eagle 1-8x24 FFP scope gives accurate holdovers at any magnification youve been looking for in an LPVO, providing you with the ultimate short to medium-range riflescope.. The EBR-8 reticle provides true red dot-like performance at 1x and holdovers out to 600 yards, and an included ranging feature in the reticle. With 9 daylight and 2 night-vision settings, you can dial up illumination to perfectly match the scenario.. The XD optical system and fully multi-coated lenses deliver a crisp sight picture to pick out targets faster. The included throw lever makes for rapid magnification changes.. To stand up to getting knocked around, the shockproof, 30mm tube is made of aircraft grade aluminum, and capped turrets keep your zero locked in.. The scope is nitrogen purged and o-ring sealed for waterproof and fogproof performance. Armortek coatings protect the lenses from scratches, oil, and dirt..

Mount your 30mm scope tube while positionsing the center of the scope tube at a height of 1.50 from the base.. The 2 offset gets your head position and eye relief dialed, while leaving plenty of real estate available to you.. Lightweight and durable, the mount weighs just 5.39 ounces and is manufactured from 6061 Aluminum.. Picatinny rail compatible with torque specs laser engraved on the mount - mounting your scope has never been easier. Type 2 low-glare matte black anodized finish.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

The updated Strike Eagle 1-6x24 is defined by speed and versatility. A true 1x on the low end adapts to a wide range of scenarios, letting shooters rapidly engage targets from point-blank to extended ranges.. The magnification ring has been updated and now includes a thread-in throw lever, and the magnification indicators can now be seen without coming off the scope.. The new illuminated BDC3 reticle focuses the shooter's eye to the target faster and holdovers allow for immediate use out to 650 yards for targets of known distance.. The fast focus dial on the eyepiece allows for quick and easy reticle focusing. Anti-reflective coatings on all air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance.. Nitrogen purged and o-ring sealed the for water and fogproof performance. The one piece, aircraft grade aluminum, 30mm tube is shockproof shrugging off recoil and other impacts..

Use this cantilever mount for mounting 30 mm telescopic sights.. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces. Aluminum construction. Weighs 6.7 ounces.

Mounting rings are pushed forward 2 for better eye relief. Designed for mil-spec upper receivers with 1913 Picatinny rail. 6061 T6 extruded aluminum construction. MIL-A-Type 3 black hard-coat anodize. Ridged and lightweight Made in the USA.

The 2-7x32 Crossfire II Rim fire riflescope is one of many configurations in the Crossfire II line. The V-Plex reticle is a popular all-purpose hunting reticle intended for a variety of hunting applications.. With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. The fast focus eyepiece allows quick and easy reticle focusing.. Anti-reflective, fully multi-coated lenses provide bright and clear views for the user.. Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.. A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fog proof performance..