1.0-inch 25.4-mm. REFINED DESIGN Compact and refined design, with low-profile, non-snagging hardware Type 303 stainless steel top cap screws with black oxide finish Micro-radiused on all machined leading edges to ensure a non-marring design. BUBBLE LEVEL Integral anti-cant bubble level in top half of ring. RECOIL LUG Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil. DURABLE ULTRALIGHT Approximately 4.41 oz. with screws pair 30mm low Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish Hard Case and T15 and T25 Torx driver bits included.

LIGHTWEIGHT DURABLE - Only 13 the total weight of steel rings approved for use under the heaviest of recoil conditions. MATERIALS - Rings sets are crafted of machined 7075-T6 hard anodized aluminum, with titanium crossbolts and jaws, they give you the performance of steel at half the weight. CONSTRUCTION - The unique construction of the rings provides strength well beyond that normally found in lightweight rings. HIGH PERFORMANCE RINGS - The four-screw ring will provide a lifetime of service for most applications. If you think you need 50 more clamping force, the six-screw Ultralite Rings will hold your scope under any conceivable situation. NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values 4-screw models - 68 in-lb 6-screw models- 100 in-lb.

DISCOVERYOPT heavy-duty 34mm scope rings, position the center of the scope tube at a height of 0.85 inches from the base.. Heavy-Duty Multi-Function Scope Rings Crafted from scope rings are CNC machined from 7075 aircraft-grade aluminum, offering rock-solid reliability and strength. The durable construction ensures long-lasting performance, even in demanding conditions.. Long Distance Precision Design Engineered for Long distance accuracy, these scope rings feature a high-precision inner bore grinding process, resulting in minimal radial and coaxial errors. This guarantees superior mounting and clamping precision, saving you time on lapping.. Durable Stainless Steel Side Clamps Equipped with stainless steel Side Clamps, these scope rings are resistant to wear and tear, ensuring they remain in optimal condition over time. The robust materials contribute to the overall durability and reliability of the product.. Picatinny Rail and Bubble Level These scope rings come with Picatinny Rail and bubble level, allowing for easy and precise alignment. The bubble level ensures your scope is leveled.For higher precision, the scope rings inner bore is pre-polished. As a result, slight aluminum traces may remain on the riflescope tube surface, and be impossible to wipe off, which is normal and does not affect performance..

Aerospace-Grade Precision Crafted from solid 7075 aluminum via zero-tolerance CNC machining. Engineered for unwavering accuracy and extreme durability, ensuring your optic maintains a true zero even under powerful recoil and harsh conditions.. Preserves Optic Integrity By utilizing the built-in angle adjustment, there is no need to max out your scope's elevation turretsa practice that can cause internal binding. This protects your internal mechanics, ensuring peak optical performance and ample adjustment headroom.. 0-90 MOA Adjustable Angle Patent Pending Precisely calibrated elevation adjustment allows you to dial in up to 90 MOA of built-in cant. This exclusive, patent-pending mechanism is essential for long-range precision shooting, providing extreme elevation travel without relying solely on your optic's internal turrets.. Locking Anti-Slip Interface Featuring a directional anti-slip recoil lug, these scope rings secure firmly to any Picatinny rail. This prevents shifting under heavy recoil impact and keeps your zero perfectly consistent shot after shot.. Innovative Single-Side Clamp The advanced single-side clamping mechanism reduces gap inconsistency by 50 compared to traditional designs. This achieves perfectly stable alignment and eliminates any risk of shifting or shaking..

DISCOVERYOPT Pro Series scope rings are precision machined from 7075 aerospace-grade aluminum.For higher precision, the scope rings inner bore is pre-polished. As a result, slight aluminum traces may remain on the riflescope tube surface, and be impossible to wipe off, which is normal and does not affect performance.. To achieve exceptional circularity and coaxiality, our scope rings undergo precision machining and lapping, guaranteeing overall precision. Index pin studs facilitate precise scope mounting and clamping, with four T-25 screws providing a secure lock. These scope rings are serialized, vibratory tumbled, hand-bead blasted, and finished with a Type III hard coat anodizeamazing resistance to scratches and impacts, providing better protection in all weather and harsh conditions. These 34mm scope rings position the center of the riflescope tube at a height of 1.45 inches from the base. They will only work with Picatinny spec mounts they do not work with Weaver rails. Important Scope rings and mounts must be tightened to the listed torque values. Over-tightening the bolts can cause damage to the scope tubes, rings, or mounts, and may void the warranty.

Provides extra rail room for rear Back Up Iron Sights BUIS when using the StrikeFire red dot along with the VMX-3T magnifier.. The cantilever ring will move the StrikeFire forward about one inch.. Provides lower 13 co-witness mounting height of 40 mm.. Will work with most 30 mm red dot sights.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

DISCOVERYOPT Pro Series scope rings are precision machined from 7075 aerospace-grade aluminum. It has higher tensile strength, shear strength, and hardness compared to 6061 aluminum.. To achieve exceptional circularity and coaxiality, our scope rings undergo paired precision machining and lapping, guaranteeing overall precision.. Index pin studs facilitate precise scope mounting and clamping, with four T-25 screws providing a secure lock.. These scope rings are serialized, vibratory tumbled, hand-bead blasted, and finished with a Type III hard coat anodizeamazing resistance to scratches and impacts, providing better protection in all weather and harsh conditions.. These 30mm scope rings position the center of the riflescope tube at a height of 1.26 inches from the base. They will only work with Picatinny spec mounts they do not work with Weaver rails..

Durable Construction Made from durable materials for long-lasting use.. Weaver Mount Designed to fit Weaver style scopes and rings for versatile mounting.. Compatible Devices Fits 1.25 inch scope rings for use with various optics.. Black Finish Features a black anodized finish for stealthy hunting.. MDT Branding Proudly displays MDT branding for quality assurance..

ULTRALITE SERIES - The X-Treme Duty Ultralite 34mm Scope Rings by Nightforce are crafted from machined 7075-T6 hard-anodized aluminum They feature a unique design with titanium crossbolts and jaws, providing the strength of steel at half the weight These ringmounts come in set of two. EXCEPTIONAL STRENGTH - The innovative construction of these versatile 34mm scope rings goes beyond the norm for lightweight rings, ensuring exceptional strength suitable for various applications The use of high-quality materials enhances durability and performance for years of reliable service. SIX-SCREW DESIGN - The six-screw configuration of these mounting scope rings ensures a secure and stable mount for your scope, promising a lifetime of service under the heaviest recoil conditions This design is a testament to the reliability and longevity of Nightforce products. PRECISION MACHINING - CNC machined to exacting standards, the mounting rings for your optic tool scope exhibit meticulous craftsmanship The use of 7075-T6 black aluminum and titanium crossbolt and jaw highlights Nightforce's commitment to precision and quality. OPTIONS - The X-Treme Duty Ultralite Rings are available in various heights 1.0, 1.125, 1.375 1.5 and colors BlackDark Earth, allowing shooters to choose the perfect fit for their specific needs and preferences This versatility makes them a top choice for discerning users.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0. 95 inches 24. 13 mm from the base. Sold two rings per package.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Picatinny Rails. Weight Per Ring 45. 92 Grams - 1. 62 oz.

Aerospace Precision Machining Scope ring crafted from solid 6061-T6 aluminum with zero-tolerance CNC machining. Engineered for unwavering accuracy and extreme durability, make maintaining zero under powerful recoil and harsh conditions. Diameter Compatibility Scope rings compatible with 30mm 34mm 1inch rifle scope tubes, 1.25 is sufficient to accommodate the height of most rifle scopes. Eliminating the need to purchase separate scope ring when switching scope. Locking Anti-Slip Interface Featuring a directional anti-slip plate, these scope rings secure firmly to picatinny rail, prevent movement under the impact of recoil and always keep the zero position consistent. Single-Side Clamp Design Innovative single-side clamping, these scope rings reduce gap inconsistency by 50 compared to traditional designs, achieve stable alignment and eliminate shaking. What do you get 234mm scope rings, 230mm replacement rings, 225.4 mm replacement rings, 1screwdriver. If you have any questions, please feel to contact us, and we will resolve them for you within 24 hours.

Use this cantilever mount for mounting 34mm riflescope tubes. Built-in 20 MOA cant.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base.. Base Clamp Screws - 45-50 inlbs Ring Screws - 18 inlbs. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Color Black.

Use this cantilever mount for mounting 34mm tubes.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base..

ULTRAMOUNT - The Nightforce UltraMount was originally designed and chosen to meet the needs of USSOCOM's S-VPS, R-VPS, and P-VPS scope programs. This 34mm rings mount will hold your scope securely in place under any conceivable situation. LIGHTWEIGHT AND DURABLE - The UltraMount's engineered combination of aluminum, steel, and titanium balances weight, strength, and stiffness to ensure a reliable and repeatable mounting solution for both bolt guns and gas guns. SPECIFICATIONS - This one-piece mount is designed for 34 mm scope tubes diameter and features a 0 MOA Taper Cap screws 25 in-lbs Crossbolts 100 in-lbs Comes in many commercial configurations 1.540 and 1.930 height, Dark Earth or Black anodizing. CONFIGURATIONS - The commercial UltraMount shares the same materials and construction as the MIL-SPEC UltraMount but has different engraved instructions and Nightforce branding. NIGHTFORCE - Since 1992, Nightforce has been creating the finest scopes that are used by professionals, hunters, and competitors Nightforce also provides a wide range of high-quality optics accessories for all your needs.

Monstrum Precision Picatinny Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. For 1 inch rifle scope tubes.. Picatinny Scope rings are compatible with Picatinny mounting platforms only. Not compatible with Weaver platforms. See Picatinny vs Weaver infographic before purchasing.. Available in four center heights to match your given needs 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch. Height is measured from the center of the rifle scope tube to the bottom plane of the mounting base.. Features an anti-recoil lug that slots seamlessly into Picatinny bases with zero wiggle, guaranteed to hold zero against the toughest of recoil.. All Monstrum products are backed by a lifetime guarantee.

Vortex Pro 34mm cantilever ring mount provides the correct height and forward placement for proper scope mounting.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA..

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1.10 inches from the base. Sold two rings per package. Made in the USA.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Picatinny Rails Weight Per Ring 2.05 ounces. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1.45 inches from the base. Sold two rings per package. Made in the USA.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Picatinny Rails Weight Per Ring 2.67 ounces. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

DISCOVERYOPT heavy-duty 34mm scope mount features Inner Bore Grinding, achieving smaller radial and coaxial errors than other models on the market. This ensures higher durability, recoil resistance, and stability, always holding zero even after repeated high-recoil firing, well-suited for powerful riflescope.. The 20 MOA built-in cant allows for a more available elevation adjustment range for the scope, enabling precise targeting at longer distances. Weight 6.3ounces Height 1.5inch Suitable Tube Size 34mm.. The offset design offers a 2-inch forward extension for the scope positioning, ensuring optimal eye relief position. Designed for all-day comfort with minimal fatigue.. Crafted from 6061 aerospace aluminum, this cantilever mount offers a lightweight design while maintaining exceptional strength and durability. Secured by 12 T-20 screws, it ensures superior stability.. This one-piece scope mount features picatinny locking bolts and TORX screws, ensuring a solid fit on any standard picatinny rail. The base is secured with 3 TORX screws for enhanced stability and accuracy.For higher precision, the scope rings inner bore is pre-polished. As a result, slight aluminum traces may remain on the riflescope tube surface, and be impossible to wipe off, which is normal and does not affect performance..

This diving board mount provides the perfect mounting height and positioning for the Vortex Impact 4000 Rail Mounted Ballistic Laser Rangefinder, reddots, and other picatinny mounted accessories. Made in the USA.. Vortex Precision Diving Board Mounts are machined with certified USA7075T6billet aluminum, held to an extremely tight tolerance of .0005 and anodized with Type III hardcoat.. Compatible with Vortex Precision Matched Rings and Precision Extended Cantilever Mounts.. Height 1.61 40.9mm, Weight 2.6 oz 73.7g. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

2 Rifle Scope Ring Mounts These 30 mm scope rings from Hiram clamp firmly onto 20 mm Picatinny rails, giving your rifle scope a stable foundation that holds zero shoot. Built to Last Precision-machined from tough 7075 aluminum and finished with a hard-anodized coating, these lightweight 1.7 oz. scope ring mounts resist wear, corrosion, and the rigors of the field. No-Fuss Mounting With precise torque settings of 20 in.-lb. for T15 screws and 30 in.-lb. for T25 screws, the included Torx wrenches help you achieve a perfect, slip-free fit. Right Height for Accuracy Elevating your scope by 1 in. 25 mm, these scope mount rings help minimize parallax issues and fine-tune your sight picture for more reliable targeting. Engineered to Stay Put Your rifle may kick, but your scope won't budge as the integrated recoil lugs on our ring mounts prevent any movement, keeping your optic stable through every round.

Monstrum Rogue Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. Available for 1 inch, 30 mm, and 34 mm diameter scope tubes. Base with recoil stop is compatible with both Picatinny and Weaver mounting platforms.. Available in multiple heights to match your given needs. Center height is measured from the center of the rifle scope tube to the bottom plane of the mount.. All Monstrum products are backed by a lifetime guarantee.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.00 inches 25.4 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

Light, rigid, and able to hold onto an optic in a dramatic recoiling environment.. Final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made.. Steel guide pins between base and caps, aiding in alignment. 7075 Aerospace Grade Billet Aluminum. Type 3 Hardcoat Anodize internal bore is raw aluminum.

Scope rings are designed to work with 34mm diameter rifle scopes any scope tube with a 34mm diameter will fit securely in these rings,compatible with standard picatinny 20mm Rail. The 1.14 inch center height,positions the scope at a specific distance above the picatinny rail, giving you the correct eye relief and sight line alignment for your rifle setup. This height is ideal for most standard rifle configurations.. 34 mm scope rings are made from 6061 T6 aluminum with precision CNC manufacturing, matte Black, lightweight and rugged. 34mm Scope Rings feature Torx screws,mounting rings has four torx screws.this allows the fasteners to be tightened more securely without stripping, which is critical for keeping your scope mounted firmly and maintaining zero during shooting. Mil-S.pec 65 inlb., 12 Nut attachments for securely clamping to the rail.

Our third gen scope mount with ultra-hard anodization process are more resilient and durable, which significantly enhances the hardness compared with traditional process. The 34mm picatinny scope rings work great for night vision and thermal scopes.. 1.95 extra high LPVO scope mount. 74mm total height with a 1.95-inch base-to-centerline height, elevates the optic for improved sight alignment, especially on flat-top rifles.. Easily and securely mounts to standard Picatinny rails. Compatible with optics using 34mm main tubes.. Built-in tape inside scope rings provide cushioning and prevent slippage of the scope in the rings, offering easy installation and secure fit.. Secure Mounting System Features double ring screws 6 screws per ring for reliable scope retention.. Precision CNC Machined Ensures durability and a precise fit for stable mounting. Anodized Black Finish Corrosion-resistant and sleek tactical appearance..

With a rigid beefed-up design with strategically placed lightening cuts to reduce weight - the Monstrum Deadlock Series provides rock-solid mounting of your rifle scope at the absolute minimum amount of weight possible. Mounts to any Picatinny or Weaver mounting platform with custom locking bolts that slot seamlessly into your rail - guaranteed to hold zero against the toughest of recoil. Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.. Deadlock Scope Rings are available for 1 inch, 30 mm, and 34 mm diameter rifle scope tubes. All Monstrum products are backed by a lifetime guarantee.

Heavy duty shockproof design for 34mm riflescope tubes. Height 1.61 from the base to the center of the rifle scope tube.. 2 pcs 34mm scope rings fit 20mm standard picatinnyWeaver rail. Shock proof design for high recoil rifles.. Made out of durable high quality material - 6061-T6 aluminium alloy. Sturdy and durable.. Built-in tape inside scope rings provide cushioning and prevent slippage of the scope in the rings, offering easy installation and secure fit.. Package includes 1 Pair x 34mm Scope Mount Rings 1 x Allen Key..

Designed for optimal long-range performance, these precision scope rings accommodate 30mm and 34mm tubes with a 1.4-inch height. The high-precision internal bore grinding ensures exceptional alignment and accuracy.. Built-In Bubble Level for Perfect Alignment The integrated bubble level guarantees your Scope Ring remains perfectly vertical, eliminating errors from canted shooting positions.. Enhanced Accuracy The combination of the Picatinny Rail and precision alignment tool optimizes performance for your Scope Ring setup.. Quick and Easy Mounting Effortlessly attaches to your Rifle Scope Ring tube, providing a secure and stable fit for your optics.. Aircraft-Grade Aluminum Construction Crafted from 6061-T Aluminum using CNC machining, this scope level delivers unmatched durability and precision.For higher precision, the scope rings inner bore is pre-polished. As a result, slight aluminum traces may remain on the riflescope tube surface, and be impossible to wipe off, which is normal and does not affect performance..

The Venom 5-25x56 First Focal Plane MOA riflescope is built for long-range and competition with a 5-25x mag range built into a 34mm tube for a massive amount of turret travel 85 MOA max elevationwindage.. XD Optical System delivers impressive resolution, edge-to-edge sharpness and greatly reduces chromatic abberation. Fully multi-coated lenses provide superior light transmission for exceptional clarity and low-light performance.. The RevStop Zero System offers an easy to set, fast and reliable return to zero. Side knob parallax adjust allows quick and easy parallax adjustments with range numbers visible while in the shooting position.. EBR-7C reticle ensures subtensions are accurate throughout the mag range making it easy to measure and range targets.The fast focus eyepiece allows for easy reticle focusing while the included throw lever allows for fast transitions between magnifications. Nitrogen purged and o-ring sealed providing water and fogproof performance. Armortek coating protects the lenses from scratches and oil. The one-piece, aircraft grade aluminum, 34mm tube is shockproof, shrugging off recoil and other impacts..

Rugged Tactical Rings for 1, 30mm, and 34mm Scopes Designed for serious shooters who need rugged reliability in any environment. Compatible with all major scope tube sizes. Mission-ready fit for LPVOs, precision optics, and long-range glass.. Extra-Wide Centerline Height Range 0.751.45 From low-profile setups to high-mounted optics, the Armada adapts to your rifle and shooting style. Easily achieve the right cheek weld, scope clearance, and comfort. Ideal for bolt actions, AR platforms, and custom rigs.. Mil-Spec Hard Anodized 6061 Aluminum Machined from durable 6061-T6 aluminum and finished in a hard anodized coating to resist corrosion and impact. Lightweight without sacrificing strength. Built for duty use and competitive range days alike.. Recoil-Proof Lockdown with Precision Torque 18 inlbs ring torque and 30 inlbs base torque ensure tight, consistent clamping without distortion. Set it, forget itzero wont shift under recoil. Designed for shooters who dont cut corners.. Battle-Tested for Tactical and Long-Range Use Developed with real-world scenarios in mind, these rings thrive under stress. Whether you're at a match or on patrol, the Armada delivers no-fail optic retention. Built for shooters who trust their gear.. Backed by the Triton Lifetime Warranty Your mission mattersand your gear should never let you down. We stand behind the Armada for life. If it breaks, we replace itno questions asked..

ROCK-SOLID STEEL CONSTRUCTION Engineered for heavy-recoiling rifles and rugged hunting conditions, these Zee-style rings mount securely to any Weaver-style or Picatinny base. They offer the strength of steel with the precision of a high-end match mount.. IDEAL FOR LARGE OBJECTIVE OPTICS Available in High and Extra High heights, these 34mm rings provide the necessary clearance for large 50mm and 52mm objective lenses, ensuring a comfortable cheek weld and proper barrel clearance.. REVOLUTIONARY POS-ALIGN INSERTS These 34mm rings feature Burriss iconic synthetic Pos-Align Inserts. They provide 100 scope-to-ring contact, compensating for any misalignment in the receiver or bases without putting stress on the scope tube.. CUSTOMIZE YOUR MOA The included inserts allow you to virtually zero your scope within the rings. Optional offset insert kits sold separately let you add or subtract up to 40 MOA of cant, maximizing your scope's elevation for extreme long-range shooting.. Tube Diameter 34mm Height Medium Base Compatibility Weaver-style or Picatinny Material Solid Steel with Synthetic Inserts Finish Matte Black Warranty Burris Forever Warranty.

Slim, low profile design allows the Lo Pro Bubblevel to be mounted on most scopes without removing the scope from the rifle.. Easily visible while maintaining the sight picture.. Mounts quickly and easily to the riflescope tube.. Made in the USA..

Each set of scope rings is precision crafted to a given height specification. Choose the height that matches your particular setup and preferred cheek weld.. Available for both 30 mm and 34 mm scope tubes.. Mount base mechanism comes equipped with custom Weaver locking bolts that slot seamlessly into Weaver platforms with zero wiggle - guaranteed to hold zero against the toughest of recoil. Compatible with both Weaver and Picatinny bases.. Uses hardened steel Torx mounting hardware to prevent stripping of the bolts. All Monstrum products come with a lifetime guarantee.

These Vortex Precision Matched Rings position the?center?of the riflescope tube at a height of 1.45 inches 36.8 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

Dual ring scope mount for flat top Picatinny mounting platforms. 5.75 inches in length with 2 inches of forward extension allowing for extra flexibility for optimum eye relief and shooting position. Lightweight 6061 grade aluminum construction. Available in 1 inch, 30mm, or 34mm diameter versions. All Monstrum products are backed by a lifetime guarantee.

Monstrum Next Level Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target, reducing scope cant error. Mount base mechanism comes equipped with custom Weaver locking bolts that slot seamlessly into Weaver platforms with zero wiggle - guaranteed to hold zero against the toughest of recoil. Compatible with both Weaver and Picatinny bases.. Available for 1 inch, 30 mm, and 34 mm diameter scope tubes. All Monstrum products are backed by a lifetime guarantee.

These Sport riflescope rings position the center of the riflescope tube at a height of 0.9 inches and weigh 1.74 ounces per ring. Sold two rings per package.. Compatible with both Picatinny and Weaver mount systems.. Crafted from durable 6061 aluminum with a low-glare, matte-black anodized finish, it features laser-engraved torque specs for fast, accurate installation every time.. Integrated recoil lug ensures secure, repeatable alignment under recoil.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount. 34 mm diameter rings for mounting standard 34 mm rifle scope tubes. Available for either Picatinny or Weaver standard mounting platforms. Confirm your rifle's mounting base before purchasing.. Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil. Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.

The Strike Eagle 5-25x56 First Focal Plane MOA riflescope provides the features needed to improve your long distance shooting.. XD Optical System delivers impressive resolution, edge-to-edge sharpness and greatly reduces chromatic abberation. Anti-reflective coatings on all air-to-glass surfaces provide superior light transmission for exceptional clarity and low-light performance.. The RevStop Zero System offers an easy to set, rock-solid return to zero after turret adjustments. Tactical locking turrets prevent accidental adjustments and provides fast, accurate adjustments.. An illuminated reticle eases use in low light and against dark backgrounds. The included throw lever can be installed for quick and easy magnification adjustments.. The scopes are nitrogen purged and o-ring sealed the for water and fogproof performance. The one-piece, aircraft grade aluminum, 34mm tube is shockproof, shrugging off recoil and other impacts..

Transform your rifle in an instant With the Monstrum Hypergrip Series QD Scope Mount, you can quickly swap out your optic to meet the needs of any situation.. The Hypergrip Cantilever Scope Mount is a dual ring scope mount with a one inch forward offset allowing for flexible placement of your preferred optic.. Mounts secure to any flat top Picatinny equipped rifle via the Monstrum Hypergrip QD mount system. Fastened by adjustable tension QD levers, with no tools required, and anchored in place by the unique Hypergrip locking mechanism.. The Monstrum Hypergrip QD Scope Mount is available for 1 inch, 30 mm, and 34 mm diameter rifle scope tubes.. All Monstrum products are backed by a lifetime guarantee.

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches 22.0 mm from the base.. Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.. Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs Base Clamp Screws-25-30 inlbs, Ring Screws-15 inlbs.. Sold two rings per package.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Center height - 1.375-inch 34.9-mm.. REFINED DESIGN - Compact and refined design, with low-profile, non-snagging hardware Type 303 stainless steel top cap screws with black oxide finish Micro-radiused on all machined leading edges to ensure a non-marring design.. BUBBLE LEVEL - Integral anti-cant bubble level in top half of ring.. RECOIL LUG - Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.. DURABLE ULTRALIGHT - Approximately 4.41 oz. with screws pair 30mm low Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish Hard Case and T15 and T25 Torx driver bits included. Top cap screw torque specifications 25 inch pounds..

PREMIER CHOICE - The Burris AR-P.E.P.R. Scope Mount is a perfect choice for shooters seeking an unparalleled combination of solidity and durability in a cantilever mount It ensures exceptional performance and reliability in various shooting scenarios. INNOVATIVE DESIGN - This mount combines both ring and base mounting This innovative design streamlines the installation process while ensuring maximum stability and alignment for mounted optics, enhancing overall shooting precision and consistency. SCOPE POSITIONING - With the capability to provide up to 2 inches of forward scope positioning, the P.E.P.R. mount delivers adequate clearance and optimal eye placement This feature promotes comfortable shooting ergonomics to maintain proper eye relief. VERSATILITY - Designed to accommodate various scope types and mounting preferences, the Burris P.E.P.R. Scope Mount includes both smooth Picatinny ring tops This versatile configuration ensures compatibility with a wide range of optics and accessories. BURRIS - Burris has built a reputation for some of the most solid, reliable rings, mounts, and bases on the market Our quality rings, mounts, and bases are vital to getting and staying on target, round after round.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.92 inches 23.4 mm from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.. Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.. We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled CNC mill.. These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.. Sold two rings per package. Hex wrench included. Made in the USA..

The Razor HD Gen III 1-10x24 first focal plane scope provides accurate holdovers through the entire magnification range from point-blank to more than 1, 000 yards. The 34mm, shockproof, aircraft-grade aluminum tube provides maximum strength and rigidity.. The true daylight bright illumination features 11 intensity levels for red-dot like speed. Easily accessible and lockable illumination dial is located on the left side of turret housing. The L-TEC tool will help make precise adjustments to the turrets.. HD optical system delivers exceptional resolution, cuts chromatic aberration and provides outstanding color fidelity and light transmission. Proprietary coatings increase light transmission with anti-reflective coatings on all air-to-glass surfaces.. The EBR-8 reticle provides true red dot-like performance at 1x and holdovers to 600 yards, and an included ranging feature in the reticle. Index-matched lenses correct color across the entire visual spectrum and optimize image sharpness and brightness.. The anodized stealth shadow finish provides a low-glare matte surface to help to reduce reflections. Designed to meet IPX7 waterproofing standards. Argon gas purged to prevent internal fogging over a wide range of temperatures.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a rifle.. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used.. This mount positions the center of the riflescope tube at a height of 1.45 inches 37 mm from the top surface of the Picatinny base.. The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Weighs 8.9 ounces. Made with pride in the USA.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

All new rigid unibody design with strategically placed lightening cuts to reduce weight. A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25 lighter than our previous generation Slim Profile Series scope mounts. Available in 3 different mount configurations allowing for optimum placement of your optic Inline Rings, 1 Inch Offset Cantilever Rings, and 2 inch Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.. Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil. All Monstrum products are backed by a lifetime guarantee.

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.75 inches 19.0 mm from the base.. Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.. Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs Base Clamp Screws-25-30 inlbs, Ring Screws-15 inlbs.. Sold two rings per package.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Mount your 34mm riflescope tube while positionsing the center of the scope tube at a height of 1.50 from the base.. The 2 offset gets your head position and eye relief dialed, while leaving plenty of real estate available to you.. Weighing just 5.43 ounces and manufactured from 6061 Aluminum, the mount is lightweight and can hold up to the rigors of range day.. Picatinny rail compatible with torque specs laser engraved on the mount - mounting your scope has never been easier. Type 2 low-glare matte black anodized finish.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

The Viper PST Gen II takes incredible performance and rock solid tactical features to new heights. The 5-25x50 first focal plane riflescope is incredibly versatile and ideal for close to long range shooting scenarios.. Shooters who dial their turrets for bullet drop and wind compensation will appreciate the laser etched turrets, adjustable parallax and the RZR zero stop. A fiber optic rotation indicator ensures you can keep track of your turret position with ease.. The reticle offers shooters highly functional, intuitive, and detailed hold points, yet remains uncluttered for optimal viewing and features 10 intensity levels with off positions between each setting.. Extra-low dispersion glass increases resolution and color fidelity. XR fully multi-coated lenses increase light transmission. Armortek coatings protect the lenses from scratches, oil, and dirt.. O-ring sealed and argon purged, the Viper delivers waterproof and fogproof performance while the single-piece, aircraft-grade aluminum construction gives shooters a durable platform..

ROCK-SOLID STEEL CONSTRUCTION Engineered for heavy-recoiling rifles and rugged hunting conditions, these Zee-style rings mount securely to any Weaver-style or Picatinny base. They offer the strength of steel with the precision of a high-end match mount.. IDEAL FOR LARGE OBJECTIVE OPTICS Available in High and Extra High heights, these 34mm rings provide the necessary clearance for large 50mm and 52mm objective lenses, ensuring a comfortable cheek weld and proper barrel clearance.. REVOLUTIONARY POS-ALIGN INSERTS These 34mm rings feature Burriss iconic synthetic Pos-Align Inserts. They provide 100 scope-to-ring contact, compensating for any misalignment in the receiver or bases without putting stress on the scope tube.. CUSTOMIZE YOUR MOA The included inserts allow you to virtually zero your scope within the rings. Optional offset insert kits sold separately let you add or subtract up to 40 MOA of cant, maximizing your scope's elevation for extreme long-range shooting.. Tube Diameter 34mm Height High Base Compatibility Weaver-style or Picatinny Material Solid Steel with Synthetic Inserts Finish Matte Black Warranty Burris Forever Warranty.

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.. This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.83 inches 21.0 mm from the base.. Sold one ring per package.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Great Product.

DIMENSIONS Positions the center of the riflescope tube at a height of 1.10 inches 27.94mm from the base. SPECS Features flat top rings for leveling and retained lock nuts to secure to a pic rail. DURABLE Drastically increased clamping force can be applied due to the 6-hole ring design and the entire mount is constructed of 6061 aluminum. CONVENIENT Features a flip-out, anti-cant indicator that can be mounted on the rear or forward ring. Fits Weaver and Picatinny Rails. INCLUDES Torx screws and Torx Wrench. DEPENDABLE Constructed with a reliable and quality design to ensure the ultimate accuracy and consistency. GUARANTEED This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.

Use this cantilever mount for mounting 30mm riflescope tubes. Built-in 20 MOA cant.. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574 40mm from the base.. Base Clamp Screws - 45-50 inlbs Ring Screws - 18 inlbs. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

The best rifle scope in the world is useless without scope rings precisely aligned that hold it immovably in place. Gotical Precision Scope Rings are the best available to mount precision optics to precision rifles. The best rifle scope in the world is useless without scope rings precisely aligned that hold it immovably in place. Gotical Precision Scope Rings are the best available to mount precision optics to precision rifles. Machined from 7075-T6 aluminum in serialized pairs to the most exacting standards in the industry, Gotical Scope Rings never need to be lapped or altered in any way. Scope Rings are .8 wide 4 screw cap to provide more clamping surface area than any other ring on the market.. Smooth edges and radiuses make Gotical Scope rings snag free and will not hang up when deploying from drag bags or scabbards. Ring sets 1.26 and taller, have weight reduction machining in the bottom of the ring body. All rings are Hardcoat Anodized matte black for a durable non-glare finish. Overall height 52mm, width 51mm, thickness 18mm.. We provide 247 Customer Services to our Buyer for the satisfaction of the Buyers. If you have any question or query please leave us message our expert team will reach out you to solve your issue.

package dimensions 5.6 cm L x 8.0 cm W x 18.4 cm H. Product type SPORTING GOODS. country of originChina. Package weight 3.0lbs. Designed with Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability.

Designed with significant lightening cuts to massively reduce weight without compromising durability. Radiuses edges and corners to prevent snagging, Scratching, or tearing of other gear and for effortless access to scope wind age and elevation turrets. Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold. Precision CNC Machined from aircraft grade aluminum with a Matte Black anodize, designed to fit on MIL-STD-1913 Pica tinny rail platform. 18mm saddle height, 34mm Offset distance, 100mm base length, medium profile fits 30mm tube optics with up to a 65mm outer objective diameter. NOTE We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 35 inch-lb..

DUAL STEEL CLAMPS - The Xtreme Signature Rings feature unique, self-centering dual steel clamps with a full cross-through connection This innovative design ensures proper centering on any width Picatinny rail while adding extra strength. POS-ALIGN INSERTS TECHNOLOGY - Revolutionary Pos-Align Inserts technology sets these rings apart, offering perfect centering and maximum scope-to-ring contact for unparalleled gripping power without risking damage to the scope finish. VIRTUALLY SIGHT-IN - The Xtreme Signature Rings enable shooters to virtually sight in the gun without moving the scope adjustments, streamlining the zeroing process and saving valuable time and ammunition This feature enhances efficiency and convenience. CORRECTS MISALIGNMENT - These rings are designed to correct misalignment caused by off-center receiver holes Also, they correct for bases or rings being slightly off-center, eliminating the need for tapered bases or shimming for long-range shooting. VERSATILITY - Crafted from rugged and robust aluminum, the Xtreme Signature Rings are both lightweight and durable, capable of mounting on any Picatinny and most Weaver-style rails Pos-Align Inserts allow shooters to adjust the cant from 0 to 40 MOA.

Designed with Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability. Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets. Patent-Pending Quick Release QR Mount Features Tool-free Tension Adjustment, Locking Quick Release Levers, and Squared Recoil Stops. Precision CNC Machined from Aircraft Grade Aluminum with a Matte Black Anodize, Designed to Fit on MIL-STD-1913 Picatinny Rail Platform. 15mm Saddle Height, 32mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 64mm. NOTE We recommend to tighten the ring top screws with a torque value of 25 inch-lb..

Use this cantilever mount for mounting 30 mm telescopic sights.. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces.. Aluminum construction. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

Designed with Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability. Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets. Patent-Pending Quick Release QR Mount Features Tool-free Tension Adjustment, Locking Quick Release Levers, and Squared Recoil Stops. Precision CNC Machined from Aircraft Grade Aluminum with a Matte Black Anodize, Designed to Fit on MIL-STD-1913 Picatinny Rail Platform. 20mm Saddle Height, 37mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 74mm. NOTE We recommend to tighten the ring top screws with a torque value of 25 inch-lb..

DIMENSIONS Positions the center of the riflescope tube at a height of 1.25 inches 31.75mm from the base. SPECS Features flat top rings for leveling and retained lock nuts to secure to a pic rail. DURABLE Drastically increased clamping force can be applied due to the 6-hole ring design and the entire mount is constructed of 6061 aluminum. CONVENIENT Features a flip-out, anti-cant indicator that can be mounted on the rear or forward ring. Fits Weaver and Picatinny Rails. INCLUDES Torx screws and Torx Wrench. DEPENDABLE Constructed with a reliable and quality design to ensure the ultimate accuracy and consistency. GUARANTEED This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.

Precision CNC Machining Perfectly matched pairs ensure precise alignment, eliminating tolerance issues for exceptional accuracy in long-range shooting and tactical applications.. Durable Construction Made from aerospace-grade 7075 T6 aluminum and titanium, these rings withstand extreme recoil and harsh environments, making them perfect for hunting and competitive shooting.. Versatile Fit Compatible with MIL-STD Picatinny rails, available in multiple heights for 30mm and 34mm scopes, offering flexibility for various rifle setups.. Lightweight and Sleek Design Starting at just 4.3 oz, the lightweight, matte black finish reduces rifle weight and glare, enhancing usability in field conditions.. Optimized Performance Reinforced recoil lugs, Torx-style screws, and ideal torque settings 18inlb for rings, 30inlb for bases ensure secure mounting, ideal for precision optics and titanium scope mounts..

Color Black. Gun Model AR-15. Tube Diameter 34 mm. FabricMaterial Aircraft Aluminum. Cant 20 MOA.

Cantilever Picatinny Scope Mount is made of aircraft-grade aluminum, providing exceptional strength and durability while keeping the weight down, making it ideal for hunting and shooting.. Rigid Precision Scope Mount can be quickly and easily mounted with the included hardware. Whether you're a beginner or experienced shooter, our mount is easy to install and use.. The mount is perfectly concentric and provides a solid platform for your rifle scope, resulting in improved accuracy and precision. You can rest assured that your scope is securely mounted and won't shift or move during use.. The rifle scope mount is designed to work with Picatinny rails and provides the option to select 30mm or 34mm tube sizes.. Our Scope Mount is built to withstand the toughest hunting and shooting conditions. Its rugged construction is finished with a black anodized coating for added durability and scratch resistance, making it a must-have accessory for any serious hunter or shooter..

Medium profile P.O.I precision optics interface rings have a 32mm center height to fit optics with a 34mm tube, and up to a 63mm outer objective. 2 piece ring set, each equipped with 4 top Torx screws designed with a 22mm ring width. Designed to fit on Mil-Spec 1913 Picatinny rail platforms.

2 piece ring set, each equipped with 4 top Torx screws designed with a 22mm ring width. Designed to fit on Mil-Spec 1913 Picatinny rail platforms. Machined from 6061-T6 aluminum alloy and 4605 steel with matte black hard coat anodize.

High performance tactical rifle scope with 6-24x magnification for mid to long distance shooting out to 1000 yards. Functionally designed first focal plane MOA reticle, with easy-to-read ranging information that remains constant regardless of magnification, for faster range estimation and holdover correction. Equipped with an adjustable objective lens - or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation. Inline dial controlled reticle illumination with multiple brightness intensities, for better reticle visibility in low light environments. Package also includes set of high profile picatinny scope rings, a detachable sunshade, a set of spring loaded flip-up lens covers.

The Monstrum Next Level Precision Scope Level Bubble tool checks for proper vertical alignment of your rifle - with precision MOA hashmarks for precision down to the very last MOA. Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot.. The level bubble attaches to your rifle scope via the integrated ring mount. Available in 1 inch, 30 mm, and 34 mm diameter versions. All Monstrum optics and accessory products come with a lifetime guarantee.

2 Rifle Scope Ring Mounts These 34 mm scope rings from Pinty fit 20 mm Picatinny rails, offering a firm, stable base to secure your riflescope, ensuring every shot is both accurate and reliable. Robust Construction Made from tough 7075 aluminum alloy and finished with a hard-anodized coating, these scope ring mounts weigh only 1.7 ounces but are built to withstand harsh conditions. Easy Mounting With the included Torx wrenches, you can precisely torque the T15 screws to 20 in.-lb. and T25 screws to 30 in.-lb., providing a secure, easy-to-install solution for mounting your riflescope. Enhanced Alignment The see-through base elevates your scope by 1 inch 25 mm above the rail, reducing parallax distortion and ensuring perfect alignment, so your shots are always on target and precise. Precision Under Recoil Featuring integrated recoil lugs, these riflescope rings prevent any movement, securing your scope in place and maintaining zero accuracy, even through intense recoil or rough shooting conditions.

Use on 34-mm riflescope tube for the most precise long-range shooting.. Use the bubble level to ensure that the rifle is perfectly vertical.. This will eliminate potential error caused by shooting a canted rifle.. Mounts quickly and easily to the riflescope tube..