GLASS-LIKE LENS Watermelon HERO LED Lights from RoadWorks recreate the vintage reflection of the watermelon light with a glass lens. Vintage Style in a more durable light. MULTIPLE LENS AND COLOR OPTIONS The RoadWorks Watermelon HERO LEDs are available in a variety of color options. From Red to Purple, there are plenty of options to fit your trucks color or theme.. EASY INSTALLATION The RoadWorks Watermelon LED Light fits into most standard watermelon light hole patterns, making it easy to switch out your old glass lights for the more durable RoadWorks light. BACKED BY ROADWORKS RoadWorks LED Lights are backed by a 3-year warranty against manufacturer defects..

Package incldues 2 Pieces Red 7 Round StopTailTurn Bus Lights with reflex lens. Screws and thick mounting gaskets are included for complete mounting. This is a Red 7 Round LED Transit Light StopTurnTail Light which has 36 LEDs. This 7 LED Stop Tail Turn light is sonically sealed and waterproof with a surface mount light with mounting gasket. With the built-in reflex, the reflector in the center of the light can be visible from a long way off.. This 7 inch stopturntail light is 12V DC and is hard wired with separate ground wire white is ground, black wire is dimmer for normal taillightrunning lights mode, and red wire is brighter for brake lights mode. NOTE These 7 School Bus lights can be used but they do not have flashing patterns. But with a proper relay it can be a flasher. These 7 Round LED Transit Lights are Great for School buses and refuge haulers, Also compatible with almost All automobiles and devices equipped with a 12 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.. Warranty and Waterproof These 7 inch round stop turn tail lights are sealed and IP 65 waterproof, even has a waterproof circuit board. The three wires that power the lamp are sealed with glue inside at the point where they exit the back of the lamp. NOTE Please do not use it under water, thanks We truly offer 2 year warranty for round 7 LED Trailer Stop Lights If you have any questions or issues about our Partsam led lights, Please feel free to us and we will reply in 24 hours.

Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light. These Triple Vertical Taillights include 3 red lenses 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White LedsBuilt-in reflex reflector removes the need for a separate reflector This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surfaceflat mount, whatever suits your application. This LED Triple Tail Light is hardwired with 8 wires White is the ground, Blue is backupreverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights NOTE If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal. Overall dimensions Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 13.4 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit. Warranty We truly offer 1 year warranty for these rear tail light combos If you have any questions or issues about our Triple LED Taillights, Please feel free to us and we will reply in 24 hours.

BRIGHT LIGHTING These 7 Round Trailer Lights adopts 36 pieces of advanced LED lamp beads, glows brightly but not dazzlingly. Longer working lifespan, much brighter and lights faster than OE units, guarantees optimal visibility and reliable safety under bad weather.. PRACTICAL FUNCTIONS These 7 Round LED Transit Lights functions as stop, turn, tail light and reflectors. Each side is equipped with 18 red square LEDs Stop, Turn Tail. Built with reflex lens, the reflector in the center of the light can be visible from a long way off.. WATERPROOF Waterproof rate IP65, sealed and waterproof with a surface mount light with mounting gasket. Effectively protects the 7 inch stop turn tail lights from dust, sand, moisture, rain and other impact of severe weather. Lower consumption and power saving, ensures long-term use for your vehicles.. EASY INSTALLATION Designed with 4 specific colored wires for convenient connection. White GroundNegative. WhiteRed High Brightness, used as BrakeTurn Light. WhiteBlack Low Brightness, used as RunningTail Light. Screws and thick mounting gaskets are included for complete mounting.. UNIVERSAL FIT These 7 LED Transit Lights suitable for most 12V vehicles, such as Semi Truck, Semi Trailer, Service Truck, Bus, School Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV, Peterbilt, freightliner, international ,Kenworth, mack and lorries etc..

Top LED Each light has 12PCS upgrade Piranha LEDs, feature better heat dissipation, wider lighting angle, higher intensity light and extend a longer lifetime, features excellent bright light and extend a longer lifetime. Stand Out Brightness Output 3 time brighter light than others. High brightness for TurnBrake light, low brightness for Tail light. Improve visibility and ensure you a safer night. Easy Installation Just surface mount the grommets light setup, attach the 3-prong plug to light, and then connect the 3 wires lead. Hole size for surface mount is 4. 3 diameter hole, 2 depth. Ready For The Weather Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. Universal Application Work on 12V DC system, function as turnBrake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase. 2 Years Warranty Honored by Nilight..

Multi functionsTriple lighting brightness functions, 10 LED Red outer ring for tail lights and also brake functions and dual function White 6 LED inner circle for Reverse and Backup Functions. Brightness SafetyEach light use 16PCS quality LEDs to output excellent bright light. Also adopt specially designed polycarbonate lens to reflect back direct light, ensure a better visibility and safety at night.. Ready For The Weather 360 edge full coverage of rubber, not easy to fall off, protect taillights, completely sealed outlet, eliminating all possibility of moisture, IP67 waterproof rating, always be ready for different kinds of weather attack. Easy to Wire InstallJust mount the grommet firstly on the pre-cut or existing holes, pop in the marker lights, and then connect to power to make it work,black wire- ground, red wire- break light, white wire- reverse light, brown wire- running light. Wide ApplicationWork on 12V DC system, function as Brake, Running, Reverse light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, etc. 2 Years Warranty Honored by Nilight..

Upgraded Brightness Each light includes 40pcs high-quality and durable LED, stably output super bright white reverse light, red runningbrake light and amber turn signals light. The rear vehicles can clearly see your light changes during the day and night, ensure your travel safety.. Outstanding Materials The clear and transparent PC lens can well display the lighting effect while isolating water, dust and sand. The outer sturdy iron frame can withstand collision and scratching.. Highly Sealed Durable The wear-resistant PC lens are wrapped with a waterproof silicone strip, and then tightly fixed with screws to the lamp body. The wires behind the light also use heat shrinkable tubes to effectively prevent water from entering the light.. Easy Installation The back of the light is equipped with bolts on the left and right. the installation is completed by tightening the bolts Wiring guidance black wire for ground, green wire for running light, red wire for brake light, yellow wire for turn signals light, white wire for reverse light.. Wide Application Can be perfectly used on most 10-30V heavy duty trucks, semi trailer, cargo trailers, boat trailers, travel trailers, horse trailers, RV, camper, UTV, Boat, Van, work vehicles etc. 2 Years Warranty Honored by Nilight..

This Listing includes 2Pcs Bright 35 LED Tear Drop Tail Lights some customers DIY it as saddle bag lights with Red Lens and Stud Mount Chrome Bezels. We add nuts to the package according to customers' suggestion.. Unit is supplied with 3 wire plugs for ground, braketurn and tail light. Black wire - ground, White wire is low brightness and Red wire is high brightness. if your stock part is the same as ours, you can make it plug and play, however, if the different plug, you need to cut the plug and rewire it Note if the taillight and stop light function properly, but the turn signal does not, please replace your existing flasher unit with an LED compatible flasher unit.. Light is secured by the 2 studs 5.21 apart on the chrome bezel Two Screws are included for mounting. These lights are tail lights and then get brighter for the turn signal and brake functions These Lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed.. Light Size 118mm x 56mm x 20mm 4.6'' x 2.2'' x 0.8'' Size with Chrome 150mm x 66mm x 20mm 5.95'' x 2.58'' x 0.78''.

Material Black Metal Housing and Plastic Red Lens.Bulb Type8 LEDs.. FunctionsRunning Tail Light, Brake Stop Light etc.. High QualitySuper bright with high visibility safety driving Signal lights.. InstallationBlack wire for groundRed wire for brake signal lightsblue wire for driving lights.. FitmentUniversal Compatible With ATVs, Dirt Bike, Custom Chopper, Cruiser, Buggy,.

FATECIM vintage duolamp LED tail light can work as stop indicator, turn signals, license plate lamp. Perfect choice for Hot Rods, Street Rods Rat Rods as well as other classic custom cars trucks builds.. 5 Wires set up. 2 Black Wires for ground, Red Wire for brake lights, White Line for driving lights, Yellow Wire for turn signal lights.. Condition 100 Brand New. 12 Volt Operation.. Material Metal Chromed Housing. Smoke Glass Lens. Red Light for driving and braking, Amber Light for turn signals.. FATECIM service If the product make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers. Plesae don't hesitate to contact us by email..

Vintage duolamp LED tail light can work as running light, stop indicator, turn signals, license plate lamp. Perfect choice for Hot Rods, Street Rods Rat Rods as well as other classic custom cars trucks builds.. 5 Wires set up. 2 Black Wires for ground, Red Wire for brake lights, White Line for driving lights, Yellow Wire for turn signal lights.. Material High Quality Metal Matte Black Housing. Smoke Glass Lens. Red Light for driving and braking, Amber Light for turn signals.. Condition 100 Brand New. 12 Volt Operation.. Great service If the product make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers. Plesae don't hesitate to contact us by email..

Each one is equiped with 39 Super bright LEDs 12 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 6 White LED as License Plate illuminator.. This square stop turn tail light is Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, etc. Also you may need to DIY to suit for Jeep YJ JK Wrangler, Jeep CJ CJ-7 NOT factory Jeep light . Partsam Lights are impact resistant and less susceptible to shock damage Each LED is directly wired and water-tight sealed.. Size 170mm x 145mm x 60mm 6.7'' x 5.7'' x 2.4'' Wire Length 150mm 6''. Wire Connection Tips Black Wire is the Ground White Wire,Red 12 LED works with low brightness as Tail Light and bottom white 6 LED works as License Plate Light Yellow Wire,White 21 LED on the upside Works as Reverse Light Red Wire,Red 12 LED works with high brightness as BrakeTurn LightPlease note this one is NOT plug and play, we need make the wire connect,because this one never come with the plug, just come with the wires.

BRIGHT LIGHTING Equipped with 24 pieces of LED diodes with better heat distribution, no glare, brighter and more energy-efficient than halogen bulbs, guarantee maximum visibility and safety even in harsh weather.. SEALED WATERPROOF Exquisite appearance with sealed design and waterproof feature, the LED tail lights are capable to prevent any invasion and corrosion from sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles.. PRACTICAL FUNCTIONS Work as stopping light, turn signal light, tail light, brake light and auto marker lights. Come with chrome bezels, PC lens and grommet housing welded together to ensure a permanent and durable use.. EASY INSTALLATION Designed with 3 specific colored wires for easy connection. Gray wire negative. Red wire brake stop light. Green wire tail running light.. UNIVERSAL FIT Ideal for Trucks, Trailers Box, Camper, Transport, 4WD, Caravans, Motor Homes, Earthmoving Mining Equipment, Forklifts, Buses and Coaches..

Nice Exterior Polish Aluminum with Glass Lens, enhance the look of your Motorcycle with these Custom Headlights.. Easy to Install and Remove 3 wires are configured, installed in a variety of motorcycles easily, which can be directly connected to the motorcycle ACC circuit, AAC circuit means Adaptive Cruise Control .Which is the position where the key is controlled.Use the nut to secure the product in places you want to install.. Fitment Universal fit for most motorcyclecruisersbikes with 10 mm mounting bolt thread.. Old School Style But Without Losing Grace. FATECIM service If the product make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers. Plesae don't hesitate to contact us by email..

OEM standard quality reproduction with a modern touch of the classic Model A tail light with license light in 12 Volt. Black powder coated steel housing with Duolamp stamp and amber STOP script on red thick sturdy glass lens. Features stop and tail functions. A favorite choice for custom projects. Size 3-34 diameter x 2-14 deep 58 long stud 2 studs as the ground and 2 wires for power Sold by each. Fit type Vehicle Specific.

WHATS IN THE BOX Included in the order is the following ONE United Pacific Tail Light with Stainless Steel Rim and Glass Lens for 1938-39 Ford Car. NOTE ONLY ONE TAIL LIGHT will be on the order, if you need multiples, please order accordingly.. FEATURES The United Pacific Tail Light for 1938-1939 Ford features a stainless steel rim and a beautiful all red glass lens. Weve powder coated the black housing for extra rust protection while out in the elements. The UP Tail Light features a pre-installed 12-volt 1157 bulb. We recommend using green and black nylon wires for that vintage look.. INFORMATION Our United Pacific Tail Light goes through the same quality control as all our UP products offered. Weve spent countless hours of research and development to come up with the best and coolest products, along with great OE style pieces to fit your classic cars and trucks. We at United Pacific listen to our customers and were always doing our best to update and create the newest items out there in the market.. WHO WE ARE We are unique individuals whose varied talents and experiences bring value to the way we connect with big rig drivers and car enthusiasts, and the world. With over 30 years of experience, were dedicated to the design, manufacturing and supply of automotive products for heavy-duty trucks and classic cars.. UNITED PACIFIC United Pacific has a large library of aftermarket parts and accessories from our classic car department to our trucking department. We strive to be the best and offer the best at the best cost We take pride in our work and products, and it takes countless hours to create the best products out there Our team provides you with the answers you need when ordering our products..