LED tag lights for license plate that mount in place of a standard license plate bolt no drilling, cutting, or major rewiring required. Just remove your existing license plate mounting bolt, install the LED bolt, connect 2 wires positive and ground, and you have a bright, weatherproof tag light. Perfect for trailers, motorcycle tail tidy, fender eliminator, side mount, and aftermarket plate bracket installations.. Specifications 12V DC operation compatible with all standard automotive and motorcycle 12V systems, 6500K cool white color temperature for the brightest, daylight-tone illumination, IP67 waterproof rating for full all-weather and submersion protection, 14 inch 6mm bolt thread fits standard license plate mounting holes, integrated SMD LED chip rated for 50,000 hours of operation.. Perfect for utility trailers, boat trailers, cargo trailers, and enclosed trailers federal law requires all trailers to have a functional license plate light visible at night. Without one, you risk traffic citations and unsafe towing. This compact bolt-mounted LED installs in seconds on virtually any trailer license plate bracket. Also great for motorcycle riders running tail tidy or fender eliminator kits.. Universal compatibility motorcycles all brands Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, Triumph, Ducati, BMW, KTM, trailers utility, boat, cargo, enclosed, dump, cars and trucks most makes and models, Jeep tire carrier plate relocations Wrangler JK, JL, Gladiator, RVs and motorhomes, ATVUTV plate mounts Polaris RZR, General, Ranger Honda Pioneer Can-Am, boat trailers, race bikes, custom builds.. The bright 6500K cool white color temperature is significantly brighter than warm white 2700K or natural white 4000K options ensuring your license plate is clearly visible to other drivers and law enforcement at night, in fog, and in heavy rain. IP67 waterproof rating means full submersion protection no concerns about rain, road spray, car wash water, or boat trailer submersion at the launch ramp..

Perfect Vehicle Compatibility - Specially designed for most off-road vehicles and pickup trucks equipped with a 10-inch hawse fairlead on the front bumper Note Not compatible with roller fairleads or 2024 Wrangler models with original winches.. 90 Flip-Up Design for Winch Access - Need to use the winch Just lift the plate up, and youre good to gono tools, no hassle. Fit perfectly under the winch cable guide without affecting any operation of the cable or winch.. 4-Points of Attachment for The Plate - Full 4-Corner License Plate FixationSecures all four corners of your license plate firmly in place, preventing wobbling, rattling, or detachment even during high-speed driving or off-road jolts.. Heavy-Duty Metal Construction - Crafted from premium high-density metal to withstand off-road impacts, rough terrain vibrations, and daily driving wear built tough enough for extreme outdoor adventures.. No-Drill Hassle-Free Installation - Mounts directly to your vehicles original bumper screw holesno extra drilling, cutting required.Loosen bolts, slide holder into place, tighten bolts, add license plate, Complete.. Package Include - 1 Flip license plate bracket,1 Single-open end wrench,1 Hex key,4 Screws,4 Nuts,4 Washers..

Fitment UTV ATV license plate holder fits UTV, ATV, Trailer, Truck, RV, Boat, Golf Cart, Snowmobile, etc. License plate holder with light street legal kit compatible with Can-Am Maverick X3 Polaris RZR Ranger Sportsman Arctic Cat Commander Defender Outlander Renegade DS SXS, and the list goes on. Size The dimension of kemimoto golf cart license plate holder kit is about 7.5 x 5.7, universal fits utv atv golf cart, etc. Please note that it is not compatible with auto plate. Bright LED Lights Kemimoto UTV ATV license plate frame is equipped with LED lights, which are bright enough with 6 spotlights. So your license plate can be seen clearly when driving at night. Material Kemimoto UTV license plate holder with LED light is made of aluminum with black powder coating on the surface, which will be durable and good-looking. Waterproof Design Kemimoto license plate holder with light is equipped with a sealing lampshade, the LED lamp is watertight. So there is no need to worry about rainy days or muddy streets affecting the use of the lights. Package Includes Comes with a kemimoto UTV ATV LED license plate mount, 4 M6 screws, 4 M6 nuts, 4 Gaskets, 2 wiring clips, 5 Zip ties, which will make your installation easier.

UNIVERSAL FIT KEMIMOTO UTV ATV license plate holder compatible with UTV, ATV, Trailer, Truck, RV, Boat, Golf Cart, Snowmobile, etc. Such as compatible with polaris rzr ranger sportsman compatible with maverick x3 talon kawasaki mule teryx kubota RTV license plate holder.. SUPER BRIGHT UTV ATV golf cart license plate holder mount with LED light come with 6 lamp beads. Add license plates to make your UTVATV street-legal and highlight the license plate in the night driving.. TWO INSTALL METHOD KEMIMOTO license plate bracket with light fit any UTV or ATV with turn signal Kits. Drill holes in the body panel or use 1.25-2 inch round pipe on the round bar. Comes with all license plate bracket accessories.. HEAVY DUTY ALUMINUM KEMIMOTO lighted license plate frame is made of aluminum with powder coating, which is not easy to rust, durable and beautiful, much better than the plastic license plate mount.. WORRY FREE PURCHASE KEMIMOTO are responsible for all quality issues. We are devoted to providing better shopping experience for customers, any problems, please contact us..

HIGH QUALITY DIODE Each of the License Plate Light Equiped with 1 Piece 12V Bright Enough 5050-SMD Three-core White Lamp Cool Tone, Maybe Someone Thinks It is A Little Blue. Long Lifespan and Low Consumption.. ALUMINIUM LIGHT HOLDER Our License Tag Light Use Aluminium Light Holder, Which Finished with Thick Black Spray. Round, Cute and also Rust Free.. RAINPROOF DESIGN Waterproofing Process are Employed to the Diodes, the Connection between the Screw Bolt and Wire. This Design can Protect the Light from Rain.. EASY TO INSTALL AND EXTENSIVE FITMENT TYPE Direct Replace the Number Plate Screw Bolt, and Simply Bolt-on, Tight and Shock-proof. Legal Assistance for Passing the Inspection of Cars, Motorcycles, Trucks, RVs, ATV, Bike. CLIENT SUPPORT Please Feel Free to Contact Us at First If There is Any Problem When You Receive or Use Our Products. We are Always Here to Support You..

CUSTOM FIT - License plate bracket is suitable for following vehicle models Nissan 2000-2025. Save money on fines Bracket size 6 x 12 fits US Canada license plates won't cover license plate or registration sticker.100 street legal. HIGHEST QUALITY - The license tag holder is made of premium heavy-duty plastic, which is totally rust-proof, anti-wear, corrosion-resistant. The metal license plate doesn't directly contact the car paint surface, so it won't lead to scratches. KIT INCLUDES- 6 secure screw bolts. Bracket has 4 mounting holes, one in each corner to hold plate secured. May require drilling holes in bumper if existing holes far apart from each other. NO EXTRA TOOLS REQUIRED Wrench is included w every bracket. EASY TO INSTALL- Align License Plate Bracket to Existing holes on car bumper and attach bracket with 2 long screws. Attach your License Plate to a Mounting Bracket using 4 small screws. Wrench is Included for Your Convenience Easy Installation. BEST EXPERIENCE - We are committed to providing customers with premium-quality automotive accessories to suit all their needs. This is why we always use non-toxic materials of the highest quality produce all goods according to GMP standards..

Fitment License plate frame is fit Polaris fit RZR Pro XP Pro XP 4 2020-2026, fit RZR Turbo R Turbo R 4 2022-2024, fit RZR Pro R Pro R 4 2022-2026, fit RZR Pro S Pro S 4 2025-2026. Fits Pro XPTurbo RPro S models use factory holes for screw-on installation no drilling required. Fits Pro R models requires minimal drilling on rear plastic trimsimple even for beginners.The mounting position of the two models is different, please read the installation instructions before installing. License Plate LED Light Durable 6 LED License Plate Light ensures that your license plate is visible in dim light, rain, or on muddy roads, not only provides you with clear visibility during nighttime adventures, but also compliance with road regulations. Material Manufactured from rugged, steel with a matte black powder coat finish for extreme durability. This heavy-duty steel license plate withstands harsh off-road vibration, shock and weather to ensure long-lasting performance. Installation With a pre-wired tail light power harness for quick, tool-free electrical connectionno complex wiring needed. Simply plug into the tail light circuit for instant illumination. Just takes a few moments, Easy to install. Package 1 x License Plate Holder, 2 x Support Brackets, 1 x LED Light, 1 x Power Harness, and Step-by-Step Instructions. Get your UTV road-ready quicklyno extra parts required.

Universal FitmentThe size of this utv license plate holder with light is 7.3 x 5.7inch, it can be installed on utv, sxs, atv, golf cart, rv, truck, snowmobile, trailer, boat, etc. and is compatible with polaris rzr, ranger, general, can am maverick x3, defender, commander, cfmoto zforce, uforce, kawasaki mule, teryx etc. PLEASE NOTE IT IS NOT SUITABLE FOR AUTO-PLATE.. Upgraded BrightnessUpgraded to 6 eco-friendly and longlived LED lights, StarknightMT UTV license plate holder is much brighter than those x3 license plate mounts with 3 lights barely. With this rzr license plate holder, your utv license plate can be seen clearly at night in the distance.. Waterproof LED LightsThe golf cart license plate bracket is IP67 waterproof, so the led light will not malfunction due to driving in puddles or rainy days, which provides much longer service life and frees you from worrying about the damage.. Premium MaterialThe ranger license plate frame is made of rigid aluminum alloy with anti-rust and scratch-resistant coating on the surface, which is waterproof, durable, anti-faded and impact-resistant. Unique design is perfect for your tough off-road style, long service life assures legitimacy of your vehicle street activities.. Humanized DesignFor higher adaptability and stability, fixing holes of 4 sizes are added to StarknightMT utv lighted license plate holder, 4 fasteners and screws is to help installing more stable. If there are only 2 holes on your vehicle, the installation place should be determinded before ordering..

KEY FEATURE The aluminum license plate bracket measures approx. 9-25 X 5 X 7100 inches and weighs approx. 2.3 oz. Designed to replace old plastic license plate brackets and mount trailer lights. FLEXIBLE SIZE RANGE The installation size for the bracket is from 1-58 to 2-12. And the installation size for the license plate is from 4 to 8-58. GREAT REPLACEMENT Made of sturdy and rustproof aluminum alloy with well-polish surface. Can prevent corrosion and rust. WIDELY APPLIED Standard bracket for most trailer and truck license plate light. Also suitable for combination tail light and stop light. EASY TO INSTALL Only a few minutes are taken to install the license plate holder with light, drilling may be required.

Superior Brightness Equipped with high-power 2835 LED chips, this light offers an exceptionally bright output, ensuring optimal visibility of your license plate during nighttime driving.. DOT Compliant and Versatile Fully compliant with DOT regulations, this license plate light is perfect for a wide range of vehicles, including trailers, RVs, off-road vehicles, UTVs, ATVs, SUVs, and pickup trucks.. Waterproof Design Crafted with a PC lens and ABS housing, this light is fully sealed and scratch-resistant, designed to withstand long-term exposure without moisture issues.. Effortless Installation Featuring a simple 2-wire connection system, installation is straightforward with a white wire for ground negative and a black wire for positive.. Complete Package The product includes one LED license plate light with a sturdy bracket and screws, ensuring you have everything needed for a secure and reliable fit..

UNIVERSAL FIT, CLEAN LOOK Universal license plate bracket designed for most standard platesuse as a license plate holder or license plate frame. Sleek black license plate frame style to match ATVs, and UTV accessories.. INTEGRATED LED PLATE LIGHTING Built-in led license plate light improves night visibility and keeps your tag readable. Includes license plate light assembly with wiring kit and splice clip for quick installs on motorcycle, trailer, or bumper plate setups.. VERSATILE MOUNTING OPTIONS Flat-mount friendly and rounded back for tuberail installsgreat for rear license plate frame placement. Works as a universal license plate bracket for racks, bumpers, bars, and custom builds.. MULTI-VEHICLE READY Use it as an ATV license plate and UTV accessories for street-legal conversions.. SECURE, RATTLE-RESISTANT SUPPORT Holds plates firmly to help keep your license plate safe on rough terrain. A reliable tag frame for license plate use...

NOTE When determining the right size to order, ALWAYS measure the height of the bar, top to bottom not the circumference. The measurement around the bar would be the incorrect measurement.. 2 Stainless Steel C-Grip mounts. 2 Stainless Steel Bolts. 2 Stainless Steel Lock Nuts. Choose from different sizes. Secures better and stronger than Zip Strips.

Trailer License Plate Holder - The aluminum metal trailer light bracket is for replacing your plastic trailer license plate light holder, prevent damage and loss of utility boat trailer, PWC, Snowmobile, ATV, Jet ski, RVs license plate, make the trailer frames last longer.. Flexible Trailer License Plate Mount - Sturdy thickness aluminium to keep strong and No bending easily, ensure no rusting and longer years lifetime. The installation size for the bracket is from 1-58 to 2-12, and the installation size for the license plate is from 4 to 8-58, suitable for license plate locks of various models, such as trucks, trailers, motorcycles, etc.. Black Aluminum License Plate Frame - The matte black license plate cover adopts rustproof aluminum, smooth and high gloss surface. 1.3mm thickness. The four-corner round design will not scratch your hands. Heavy duty metal license plate frame, with black screw cap, is suitable for the front or rear license plate of various colors of cars. Easy To Install - Our trailer plate bracket kit matches with license plate light of size 2 screw hole spacing. We provide boat trailer hardware- stainless steel license plate screws and nuts. M620mm and M616mm screws can easily mount the trailer bracket to the 2 hole license plate light lamp assembly.. After-Sale - If our trailer tag bracket frame any questions, If the screws are not suitable for your car license plate mount, we will send you the appropriate replacement.

Brighter Than Stock Tag Light Built-in high power 2pcs 2835 LED chips, super bright light output makes your license plate clear at night.. DOT Compliant Fully Sealed and Waterproof This license plate lamp has passed the waterproof test, has a high-quality PC lens, ABS housing processed with ultrasonic treatment, is anti-scratch, not faded with long-time exposure, and can adapt to all kinds of extreme weather, has no moisture inside after heavy rain or car wash anymore.. Easy Installation 2-wire connection, white wire is the ground negative, and black wire is positive.. Wide Applications Universal for trailers, RVs, off-road vehicles, UTVs, ATVs, SUVs, pickup trucks, etc. Before operating the product, check the diagram to ensure proper installation.. Package Content 1x LED License Plate Light with Bracket and Screws.

No-Drill Hassle-Free InstallationThe Flip-Up License Plate Mount can be fixed at the original screw hole location without requiring any additional drilling.The winch fairlead license plate mount secures all four corners of the license plate,providing increased stability. Totally Street Legal For U.S.License plate.With zero license plate sticker obstruction,this winch license plate mount for car wont bring you trouble.. 90 Flip-Up DesignThe fairlead license plate mount features a flip design,offering enhanced aesthetics and a tech-savvy feel.It seamlessly conceals the winch and folds effortlessly for operation.The bracket folds beyond 90 degrees without obstructing anchor chain passage.This newly designed front bumper license plate mount is compatible with chain fairleads and modified winch hooks.This flip-up license plate mount is the ideal choice for vehicles equipped with winches not suitable for roller fairleads.. Durable Weather-Resistant DesignThe license plate flipper is constructed using high-density metal and coated with black powder for improved durability and resistance to corrosion.It's a perfect upgrade for your car.. Father's Day GiftsEverything you need is included the bracket,all necessary screws,nuts,and installation tools.Packaged and presented as an excellent gift idea,this practical and sleek accessory is ideal for car enthusiasts,drivers, and adventurers for birthdays,Father's Day,or any occasion.Your satisfaction is paramount - if you have any questions,we're here to help.

Wide Compatibility Stable Voltage - This UTV license plate light operates at DC 12V, perfectly compatible fit for UTV, ATV, Trailer, RV, Truck, Boat, Golf Cart, Snowmobile, etc. Such as RZR Ranger General Maverick X3 Commander Defender Outlander Renegade DS SXS, and the list goes on. With White Light Design - Our utv license plate holder with light will come with 3 bright LED lights so that others can see the license plate number clearly even in the dark evening, while meeting standard road use requirements. Premium 6063 Aluminum Construction - This utv license plate mount made of high-strength 6063 aluminum alloy for excellent heat dissipation, rust resistance and impact resistance, built to withstand harsh outdoor environments. Easy to Install UTV License Plate Holder - Easy to install utv license plate holder with light, drilling may be required, package is attached with an instruction manual for installation, and come with all hardware required. Stable structure, low power consumption, providing long-term reliable use. Waterproof Design - The utv license plate holder can work greatly in bad weather. With IP67 rate waterproof and outstanding shock resistance, it allows you to go off-road even on rainy days without worrying about your lights being damaged..

Compatibility Widely Compatible with most UTVATVMotorcycleGolf CartSnowmobileTractorBoat.This license plate holder, Which is specially equipped with 6LED lights, unlike other 3LED lights on the market, making your vehicle street legal and offering better lighting.. Superior Performance With IP67 rate waterproof and outstanding shock resistance, it allows you to go off-road even on rainy days without worrying about your lights being damaged.. Durable Material Made from CNC Billet aluminum not only makes it light-weight, but also ensures high- Strength. Black powder-coated treatment offers more resistance to corrosion. Easy Installation You can choose to install it on the front or rear of the vehicle according to your preference.Through Computer-aided design multiple fitment tests to ensure fit.. Package list 1 X License Plate Bracket.

Sturdy Bracket High-quality aluminum alloy material and advanced production process, the mounting bracket is impact resistant and anti-corrosion. UNIVERSAL Fits most standard vehicle license plates and auxiliary lighting systems with front license plate holes. Easy Installation no drilling, no modification required, just like to replace a license plate using its mount location, usually can be installed in 20 minutes. Wide Application Fits for almost all cars, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road Auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars. Package Includes 1PCS Universal License Plate Mount Bracket. 2 Years Warranty Honored by Nilight.

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, head racks, roll bars, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Universal Fit - OPP ULITE utv license plate holder can widely fit for UTV, ATV, Trailer, RV, Truck, Boat, Golf Cart, Snowmobile, etc. Such as RZR Ranger General Maverick X3 Commander Defender Outlander Renegade DS SXS, and the list goes on.. With Light Design - Our atv license plate holder with light will come with 3 bright LED lights so that others can see the license plate number clearly even in the dark evening, make your vehicle street legal.. Aluminum Body - OPP ULITE utv license plate mount, made of aluminum with black powder coating on the surface, is enough sturdy and solid to avoid crack, scratch, or deformation. It stays more stable than plastic in driving. also, the black powder coating can prevent corrosion and resists all kinds of weather conditions, making it a longer lifespan.. Easy to Install UTV License Plate Holder - Only a few minutes are taken to install the license plate holder with light, drilling may be required, package is attached with an instruction manual for installation, and come with all hardware required.. Waterproof Design - The utv license plate holder can work greatly in bad weather. With IP67 rate waterproof and outstanding shock resistance, it allows you to go off-road even on rainy days without worrying about your lights being damaged..

CZC AUTO brand aluminum license plate bracket designed for replacing your Plastic license plate bracket. Advantage More sturdylong years lifetime and No rusting. Exclusive and shinny looks for your trailer. Blue film to cover the front and back sides of aluminum tread surface for protecting shinny surface and no crash Just peel off film before install it. Standard size for almost trailer and truck license plate light bracket.

Premium Aluminum Construction Our Trailer License Plate Bracket Frame is crafted from high-quality aluminum, offering a durable and rustproof solution for trucks, trailers, RVs, and boats. This heavy-duty bracket ensures long-lasting performance even in harsh outdoor environments. Designed for standard models This license plate holder is perfect for a wide range of standard vehicles including RVs, trailers, and trucks. Sturdy and Secure Design The black aluminum metal frame not only enhances the aesthetic appeal of your vehicle but also provides a sturdy and secure hold for your license plate. The metal construction prevents bending and ensures that your license plate stays in place. Versatile and Easy Installation With its user-friendly design, this trailer license plate bracket allows for easy installation. The included instructions guide you through the process, ensuring that your license plate is securely mounted in minutes. Ideal for both novice and experienced installers. NOTE The package contains only 1 license plate bracket installation accessories are not included.

Universal Fitment The license plate holder fits UTV, ATV, Trailer, Truck, RV, Boat, Golf Cart, Snowmobile. The UTV license plate is compatible with RZR Ranger General Maverick X3 Commander Defender Outlander, and the list goes on. Impact-resistant Material The UTV license plate mount is made of CNC Aluminum, not only strong and solid but also has good stability. The black powder coating can prevent corrosion and extend it have a longer lifespan. Much better than the plastic license plate mount. Waterproof LED Light The ATV license plate holder includes 3 waterproof, high-brightness LED lights, ensuring your license plate is clearly visible to others, even in dark evenings or low-light conditions. This critical visibility not only boosts safety on roadspaths but also helps keep your UTVATV fully street legal. Easy to Install The golf cart license plate holder takes only a few minutes to install. Drilling may be required, but weve included a detailed installation manual and all necessary hardware in the package, no extra tools or parts are needed. All-Weather Applicable The license plate light mount resists all kinds of weather conditions. Equipped with a strong-sealing lampshade, the LED lamp is waterproof, and the use of the lights will not be affected by rainy days or muddy roads. Undeterred by harsh environments.

Universal all ATV UTV Models Universal UTV ATV License Plate mount kit bracket holder with light fits for P-olarisRanger XP 1000, Ranger 500 570 1000, RZR 570 800 900, RZR XP 1000, RZR Pro XPR, General 1000XP 1000 C-an A-mMaverick X3TrailSport, Commander 10001000R, Defender HD10Pro HD10HD8HD5 KawasakiMule 40040104010 TransPRODXTPROFXPROFXRPROFXTPROMXSX, Teryx 800KRX 1000, Teryx4 800SportsmanOutlanderRenegadeDS.For more applicable models, please see the details page. Lighting Design UTV ATV RV boat trailer lighted license plate bracket holder frame mount is designed with LED light.Six spotlights make your license plate bright enough to be seen when driving at night.License plate holder with light street legal kit makes your UTV and ATV legal on the road.Easy installation,comes with wiring clips,plug and play wiring.NOTE Red wiring for positive,Black wiring for negative.. Waterproof Design UTV ATV RZR golf cart x3 ohv license plate holder bracket frame mount kit with LED light is made of high quality aluminumthe surface is black powder-coated for durability,which is wear-resistant, waterproof, not easy to rust.The light part has a strong sealed lamp cover, so you don't have to worry about splashing water during driving or rainy days affecting the normal operation of the light. Adjustable Mounting Hole Design The mounting hole distance of the license plate holder can be adjusted according to the license plate hole position or vehicle articulation hole position.Universal for all license plates with 7 inches long 4 inches wide.Please see the size display to confirm whether it is suitable before purchasing.NOTE not compatible with auto license plates. Package 1 X LED license plate mount with hardware.

ALL-IN-ONE REGISTRATION SOLUTION Complete off-road license plate kit includes one durable white mounting plate 4 x 7.5, rust-proof mounting hardware, two sets of 0-9 numerals, and one set of A-Z letter decals. Everything you need to get trail-legal fast.. MEETS STATE REQUIREMENTS Specifically designed to satisfy off-road vehicle registration laws for Minnesota MN, South Dakota SD, North Dakota ND, and Wisconsin WI. Avoid fines and ride with confidence on public trails.. EXTREME DURABILITY Constructed from heavy-duty injection-molded PVC plastic. This impact-resistant plate is engineered to withstand deep scratches, fuel spills, UV fading, and the harshest trail conditions without cracking or peeling.. HIGH-VISIBILITY DECALS Includes comprehensive alphanumeric decal sets featuring 1.5-inch tall characters. The black text on the white background ensures high contrast, making your registration ID easy for trail officials to read from a distance.. UNIVERSAL FIT EASY INSTALL Proudly Made in the USA. Designed for universal compatibility with ATVs, UTVs, Side-by-Sides SXS, and snowmobiles. Easily mounts to plastics, bumpers, or roll cages using the included hardware.

Universal Fit Vi9000 License plate holder with LED lights universally fits for UTV, ATV, Trailer, RV, Truck, Boat, Golf Cart, Snowmobile, etc. Such as RZR General Ranger Maverick X3 Commander Defender trail Outlander Renegade DS SXS, and other UTVATV models. Long Lifespan Vi9000 UTV license plate kit is well-built made of aluminum and precise CNC cut technic, can withstand high impact and brave all harsh climatic conditions, making it a longer lifespan, much better than the plastic license plate mount. Waterproof LED UTV License plate holder with light will come with 3 bright LED lights so that others can see the license plate number clearly even in the dark evening, make your vehicle street legal.The sealed LED lights make off-road and water fording more user-friendly, even in harsh environments such as rain or mud. Impeccable Build Quality Vi9000 ATV license plate holder made of black powder coating on the surface that effectively prevents corrosion. It's enough sturdy and solid to avoid crack, scratch, or deformation. Smooth matte black finish and fashionable appearance show a cool metal sense. Easy to Install All hardwares and instruction manualare included. lighted license plate frame is easy to install at the rear of UTV ATV. Waterproof LED light with aluminum is designed for long-term use, It can better cope with the high-frequency vibration of UTV, no more hassling of buying a new one. Note this license plate frame is standard car plate size, NOT motorcycle plate size.

Trailer License Plate Holder Bracket You will receive 1 pack black trailer license Plate bracket, 4 packs sets of mounting screws and 4 pack safety reflective stickers in the package. The size of the license plate frame is 9.4 x 4.9 x 0.5, 2.06 mm thick. It is compatible with most trailer lights, including motorcycle, boat, transport, construction, snowmobile, etc. trailers. Installation Dimensions The installation size for the bracket is from 1-58 to 2-12, and the installation size for the license plate is from 4 to 8-58, suitable for license plate of various models, such as trucks, trailers, motorcycles, etc. Stainless Steel Trailer License Plate Holder Metal license plate bracket is designed for replacing your plasticrubber license plate holder. It is made of premium stainless steel material, which is rust-proof and corrosion-resistant, prevents damage and loss of your trucktrailerRV license plate, makes the license plate light bracket last longer. Easy to Install This trailer light bracket holder matches with license plate lights that have a screw hole spacing of 2. We provide rust-proof license plate screws, nuts, and screw caps in the set to help you install easily and quickly. The M6 screws allow for easy installation of the trailer bracket onto the two hole license plate light lamp assembly. Safety Reflective Stickers There are 4 packs safety reflective stickers in the set, and the size is 1.97 11.77. It is made of premium PET composite material and with industrial strength polymer adhesive hold. The red and white reflective decals effectively prevent traffic accidents, can be widely used for cars, RVs, SUV, boat, road signs, mail boxes, trucks, trailers, fence, bicycles.

Trailer Truck License Plate Holder- Aluminum license plate bracket is designed for replacing your plastic license plate holder, heavy-duty, prevent damage and loss of your TruckTrailerRV license plate, make the license plate light bracket last longer. This product was specifically designed for Boat, PWC, Snowmobile, ATV, Utility trailers and RVs. For Universal Truck License Plate- Sturdy thickness Aluminium to keep strong and No bending easily, ensure no rusting and longer years lifetime. The installation size for the bracket is from 1-58 to 2-12, and the installation size for the license plate is from 4 to 8-58, suitable for license plate locks of various models, such as trucks, trailers, motorcycles, etc.. Silicone License Plate Frame- The black rustproof rattleproof car tag frame uses industrial-grade silicone material, soft and tough, can withstand extremely high and low temperatures. The flexible material protects your vehicle from license plate rattle and scratching . 5 drainage holes are designed on the bottom of the silicone plate frame, to release rain and dust. Easy To Install- Our truck license plate holder frame kit matches with license plate light of size 2 screw hole spacing. We provide license plate mounting hardware- license plate screws and nuts. M620mm and M616mm screws can easily mount the trailer bracket to the 2 hole license plate light lamp assembly.. Our bracket frame provides 1 year service. If the size of the screws are not suitable for your car license plate mount, please contact us, we will send you the appropriate replacement.

5x8 Rigid Metal UTV License Plate custom dyed with YOUR registration numbers. Click The Customize Now Button to enter your registration information. Extremely Quick Turnaroud. Comes with pre-drilled holes and zip-ties to install. Available with optional frame and mounting bolts for a professional finished look. No stickers or paint to peel, fade, or crack Pressure washer safe. Extra Heavy Duty Metal Extremely Durable. Extremely Quick Turnaroud. WIDNR Compliant.

High brightness Our license plate light built-in 2pcs 2835 LED chip, high brightness output, so that your license plate is clearly visible at night. You can use this high brightness LED license plate light repalcement for license plate lamp that is no longer bright or not bright enough, showcasing its plates in brilliantly bold by white LED illumination.. IP67 Waterproof This license tag light adopts Fully sealed design,with the IP67 Waterproof rating. which can effectively prevent moisture, dust and other impurities from entering the interior of the lamp, and protect the circuit and LED lamp beads from damage. Whether it is in rainy days, snow days or bad road conditions, LED license plate lights can work properly.. Universal fit This is a universal automotive license plate light assemblies fit for trailer RV camper trucks Van UTV ATV lorry motorcycle and boat marine applications etc. The license tag light with bracket mount does not require additional accessories to be purchased.. Easy Installation The installation of the license plate light is very simple, you only need to use the attached mounting screw to fix the license plate light on the license plate frame, and connect it to the wire of the license plate light. Due to the reasonable design of the license plate light, it will not obscure the license plate number, ensuring that your vehicle is legal and compliant.. Package Content 1x LED License Plate Light with Bracket and Screws.

Fitment Widely Compatible with most UTVATVMotorcycleGolf CartSnowmobileTractorBoatRV. Performance With IP67 rate waterproof and outstanding shock resistance, it allows you to go off-road even on rainy days without worrying about your lights being damaged. Durability Made of CNC Billet aluminum not only makes it light-weight, but also ensures high- Strength.Black powder-coated treatment offers, thus prolonging service life and maintaining aesthetics on your vehicle. Precision Assurance Through Computer-aided design Multiple Fitment Tests to ensure the fit.. Easy Installation You can choose to install it on the front or rear of the vehicle according to your preference..

Material Fender Eliminator- Made of CNC Aluminum, adjustable license plate holder,laser cutting,treated with oxidized surface.. Suitabled Fender eliminator kit plate holder universial Replacement for Yamaha Kawasaki Honda Ducati Suzuki.. Packaged1 license plate light fender eliminator 1 necessary install hardware, instruction is not included,the fender eliminator light need to manually connect the cables.. FunctionLicense plate bracket holder protects against the splashing of water and the tires and engines of your motorcycle during using, keeping the motorcycle clean even on wet roads.. ConfirmedFor detailed license plate mount compatibility information, please see the following descriptionand please confirm with the model and year of your motorcycle from the following description ..

Vertical curved license plate bracket. Machined from Billet Aluminum, then Black Anodized for a Long Lasting Finish. Mounts behind your axle nut, or lower shock bolt. Very easy to install. Simply unbolt your axle bolt, slide this into place, and reinstall the axle bolt. Will fit almost all motorcycles with a 34 axle.

Fitment Perfect fits for most UTVs and ATVs, such as Polaris RZR Ranger, Can-Am Maverick X3 Outlander Defender. Also suitable for most Trailer, RV, Truck, Golf Cart, Snowmobile, Boat and etc.. Material Made of high quality HDPE plastic with sturdy construction. Not easy to produce cracks and scratches, will not be easily broken. Compared with the aluminum license plate holder, it will not cause friction damage to the license plate. It can be used for a long time and adapt to various weather conditions.. LED Light The holder equipped with waterproof and bright LED light, so it can be used for a long time. And even in the dark night, your license plate can be seen clearly.. Function Holds your license plate firmly in place, make your vehicle street legal.. Installation Easy to install, drilling may be required. Plug and play. Package include one license plate bracket, necessary hardware and instruction..

Fit For Kawasaki Teryx KRX 1000 2020-2025 Fit For Kawasaki Teryx KRX4 1000 2023-2025 Fit For Polaris RZR Pro XP 2020-2025 Fit For Polaris RZR Pro XP4 2020-2025. Own different test machines to design exact accurate parameter for our products.All items were tested for performance.. Made by high quality material, lightweight, anti-rust, colorfast and durable.. Aftermarket product with premium quality.. Stable performance, high reliability,suitable for replacing your broken one..

PREMIUM QUALITY This FERAL ATV License Kit is resistant to UV fading, fuel, scratches, and impact. The plate is Composite, which is a cool name for plastic. The mounting hardware is steel, because plastic clamps and little nylon screws dont cut it for this application. Seriously.? Confidently use this license kit for years to come.. PROUDLY MADE IN THE USA? Our license plate kits are manufactured to scale in Wisconsin, to meet state requirements.? The plate dimensions are 4 x 7.6 with mounting holes, spaced at 4 apart.. EVERYTHING IS INCLUDED The kit includes two sets of 0-9 numerals and one set of A-Z letters along with high tack adhesive-backed vinyl. We only use premium-quality American-made Oracal vinyl. We will never cut corners on quality. Steel hardware and vinyl-coated steel clamps See Hardware Compare Zip ties are included as an alternative mounting option.. FREE BONUS INCLUDED This license plate kit includes a FERAL Performance Koozie, 3 window sticker and card, introducing you to FERAL Performance. Yep, it's also Made in the USA.. BUY WITH CONFIDENCE Buy this FERAL ATV Gear license plate kit worry free We stand behind all of our products 100. THANK YOU, for considering our products and supporting our small, family business. You won't regret it. Take care..

Fitment The UTV license plate holder fits for all UTV- 7 4inch license plate,such as all Can Am Maverick X3 Models, Polaris RZR 570 800 900 XP 1000 Turbo s ranger general, Golf cart, Kawasaki mule teryx krx, YXZ Rhino Viking Wolverine and so on.. Premium material The Can am X3 license plate frame is made of aircraft grade 6061 T6 aluminum,with black powder coated black, which is corrosion resistance, rustproof, not easy to break during use, much better than the plastic license plate mount.. Features The aluminum universal license plate frame mount is equipped with LED lights with 6 spotlights, plug and play wiring, light up your license plate while driving at night.. Easy installation The Polaris RZR license plate holder with LED light easy to install, no drilling or any modification required, bolt connection installation, the operation is simple and does not require professional guidance. some may need drilling.. Package 1 Pentagram License plate with all Hardware Included. NOTE Red wiring for positive,Black wiring for negative..

Works great for dealer plates. Simple, secure and clean. When bike is parked, entire mount can be locked in saddlebag for a clean, secure look. No drilling or fastening needed. Closure of lid holds mount in place.

FITMENT Universal Fits for All 7 4inch license plate -UTV, ATV, RV, Trailer, Truck,Snowmobile, Boat, Such as All Can Am Maverick X3 Models, Can-am commander, Polaris RZR XP 1000 Ranger, Kawasaki Teryx,Golf cart and so on.. Mounted on the rear of the vehicle to display the vehicle registration sticker or licence plate label. Our license plate frames are equipped with LED lights with 6 spotlights, Plug Play Wiring. Light up your license plate while driving at night.. Made of aluminum with a black powder coating for resistant and good looks.The dimension is about 7.5 x 5.7.. The lampshade is sealed with a waterproof design. So don't worry, the rain will not affect the use of the light.. ALL Hardware Included Easy to Install.NOTE Red wiring for positive,Black wiring for negative..

DESIGN PURPOSE The Chelhead UTV license plate holder with light is to be mounted to the back of vehicle to display vehicle registration sticker or license tag.. VEHICLE APPLIED The dimension of universal utv license plate mount is about 7.5 x 5.7, will compatibel with Polaris RZR, Can-am commander maverick x3, Kawasaki Teryx,golf cart and other ATV UTV some may need drilling. UNIVERSAL FOR LICENSE fits for 7 inch length and 4 inch width license plate. LED ILLUMINATED UTV universal led license plate frame 6 PCS led with low amps,saving engery, just ties into the factory wiring to power the LED.. DURABLE ALUMINIUM Chelhead license plate holder made from durable aircraft grade 6061 T6 aluminum,with black Powder coated black for a durable finish.

Premium QualityMotorcycle license plate bracket is made of high quality alloy steel, scratch and wear resistant, strong structure, high strength, fine workmanship and long service life.. Easy InstallationSimplify installation steps, no modification, cutting or drilling required. Easy to install with 6mmM6 screws.Note This order does not include mounting parts for screws, etc.. Widely ApplicationLicense plate holder bracket is suitable for most motorcycles. Can be used with combination tail, stop, license lights.Compatible with most trailer lights, including motorcycle, boat, transport, construction, snowmobile, etc. trailers.. Product SizeTotal Length 177 mm 6.97 inchMounting Hole Diameter 6 mm 0.24 inch.Please pay attention to the size before order placed.. Perfect AccessoriesBlack polished surface.Designed as a sturdier and more aesthetically pleasing replacement for your factory plastic license plate holder..

IMPECCABLE BUILD QUALITY - Made from high-quality components which are designed to withstand damage and brave all harsh climatic conditions.. HASSLE FREE INSTALLATION - In addition to the ready to mount stainless steel bracket, the kit comes will all the accessories required for installation thus making sure that the installation experience is as pleasant as possible.. WATERPROOF - With an IPX7 waterproof certification, this kit is well protected from rainfall or a dip in a puddle thus enhancing its functionality and durability.. VERSATILE - Being waterproof doesn't only add to this LED kit's durability, but also its functionality, making it suitable for various purposes including marine applications.. SAFELY PROTECTED BY LAW - With a DOT FMVSS-108 Certification, this license plate kit enhances your visibility and ensures that you conform to the set laws..

Long Lifespan KEMIMOTO UTV license plate mount is not only strong and solid but also has good stability and corrosion protection, resists all kinds of weather conditions, much better than the plastic license plate mount.. Waterproof LEDATV License plate holder with light will come with 3 bright LED lights so that others can see the license plate number clearly even in the dark evening, make your vehicle street legal.. Wide CompatibilityWaterproof License plate bracket fits UTV, ATV, Trailer, Truck, RV, Boat, Golf Cart, Snowmobile. KEMIMOTO license plate is compatible with RZR Ranger General Maverick X3 Commander Defender Outlander Renegade DS SXS, and the list goes on.. Easy to InstallAll hardwares are included. lighted license plate frame is easy to install at the rear of your beloved UTV ATV. Waterproof LED light with high-quality aluminum is designed for long-term use, no more hassling of buying a new one.. Fashion UniqueUTV license plate holder is well built, smooth without defects, and shows strong metal sense due to its fashionable and unique appearance design. Note this license plate frame is standard car plate size, NOT motorcycle plate size..

ADD MORE LIGHTS, LESS HASSLE- Simplify the installation of LED light bars work lights without drilling any holes in the bodywork quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.. ALMOST ENDLESS APPLICATIONS- Can be used on tubes measuring 1, 1.5, 1.75 2 in diameter perfect for off-road vehicles, ATVs, UTVs, trucks, boats, farm vehicles more.. CAST ALUMINUM CONSTRUCTION- Precision-welded from cast aluminum, our clamps are strong built to last.. COMES FULLY-LOADED- Includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.. RUBBER INSERTS DAMPEN PROTECT- Rubber inserts for snugger fitment with a wider range of sizes help dampen vibrations during off-roading and protect your bull bar from being scraped.. BRAND-NEW BACKED - 100 brand-new, never used, and covered by a 1-year original manufacturer warranty. Got questions Hit us upwere here to help..

For U.S. License plate. - Aujen license plate frames use the high quality silicone materials, which protect license plate from rusting and damaging. This license plate frame black is more durable than plastic frame.. Rust-proof. Rattle-proof. Weather-proof Car Accessories. - Made from industrial-grade silicone, this liscen plate frame have soft flexible surface that prevents any scratches or rattles. And these lisences plate frame will not rust even if it is exposed all year round to wind and rain.. Humanized design - Our automotive license plate frames have 3 drainage holes to release water. Black matte material does not discolor or rust and gets better with use.. Totally street legal - With zero license plate sticker obstruction, this license plate frame for car wont bring you trouble. No more worrying about being stopped by the police.. Worry-Free Purchase - Aujen service team stands firmly behind our products and will be responsible for all quality issues. We are devoted to providing better shopping experience for customers, any problems, please contact us..

For Front License Plate Mount- If you have 2 pre-drilled holes in your front bumper, no matter if the hole spacing or position is in line with standard license plate, you can use our front license plate adapter for license plate mount, if your car bumper has no hole, you can use our stainless steel cable ties to mount on a grill with protruding contours. Refer to the 4th image.. Firm License Plate Tag Holder - This front license plate bracket is made of black ABS plastic which resists corrosion and rust. The metal license plate does not directly contact the car paint, avoid scratches and noise, protect the license plate rustproof and rattle proof.. Easy To Install - Our front tag brackets have a unique design - 4 copper nuts with neat threads that hold the bolts tightly and hold the license plate on the bracket. The kit includes license plate mounting hardware stainless steel license plate screws, black screw caps , stainless steel cable ties.. For Front Plate Holder- Suitable for 6 12 standard car license plates, with multiple adjustable mounting holes, suitable for 4-hole or 2-hole license plates. Not applicable as a JDM to USDM license plate adapter. Please check the spacing size of the pre drilled holes in your car before purchasing.. Guarantee - Regarding the front license plate bracket, if you encounter any installation issues, such as incompatibility with the vehicle model or missing hardware screws, cap nuts, and stainless steel cable ties, please feel free to contact us, and we will actively respond and handle the issue, send replacement or refund..

Black License Plate Bracket Trailer- Heavy-duty Metal license plate bracket is designed for replacing your plasticrubber plate holder, stainless steel metal prevents damage and loss of your Boat Trailer license plate, make the trailer light bracket last longer. This product was specifically designed for PWC, Snowmobile, ATV, Utility trailers and RVs. Trailer Tag Bracket Mount- Black car plate holder bracket Trailer, Size 9.4 x 4.5 x 0.5in, 1.3 mm thick. The installation holes distance is between 100mm-220mm, compatible with most trailer lights, including motorcycle, boat, transport, construction, snowmobile, etc. trailers.. Easy To Install- Our trailer light bracket kit matches with license plate light of size 2 screw hole spacing. We provide license plate mounting hardware- rustproof license plate screws and nuts and screw caps. M6 screws can easily mount the trailer bracket to the 2 hole license plate light lamp assembly.. Reflective Stripe - 4 pack safety reflective stickers in the trailer plate holder kit as a present, size 2 x11 5x28cm. It is made of high quality PET composite material and with industrial strength polymer adhesive hold. The red and white reflective decals greatly prevent traffic accidents, widely used for cars, RVs, SUV, boat, road signs, mail boxes, trucks, trailers, fence, cycling..

Safe Street Legal Kit The UTV street legal kit includes a turn signal kit and a 110dB universal horn, a License plate holder with light, and ensures your off-road vehicle is street legal and enhances driving safety in the wild or during bad weather conditions. Compatible with Polaris, Pioneer, Talon, Can-Am X3, Can-Am, Teryx, Arctic Cat, CFMOTO, ATV, and more. Larger Size Brighter Light The turn signal kit is made of 144 LED beads delivering 2000LM brightness, with arrow indicators featuring a flowing light effect. Even during the daytime, they are clearly visible. The rectangle design is more beautiful and fits the UTV better. Plug Play Installation The UTV blinker kit is a Pre-wired systemno wire splicing neededwith extended cables. Fits 2-seater, 4-seater, and 6-seater UTVs perfectlyno extra extensions needed. Pre-assembled harness labeled light connector positions make installation quick and easy. All accessories for the lighted license plate frame are included and can be easily installed on your UTVs rear. Lever Turn Signal Switch 110dB Louder Horn This versatile lever switch matches your UTVs original look and feel, easily clamping onto the steering columnno drilling or cutting needed It combines turn signal, hazard light, and horn controls in one unit, boosting convenience while saving dashboard space. The built-in 110dB loud horn cuts through noisy environments, effectively alerting nearby vehicles and pedestrians for safer UTV driving. Waterproof Rugged The ATV blinker kit is IP67 waterproof, and the license plate holder with light is equipped with a sealing lampshade the LED lamp is watertight, no fear of harsh environments. Impact-ready UTV turn signals EVA buffers, tough PC lenses, aluminum heat-sink frame CNC aluminum license plate holder.

Durable All-Weather Construction for Long-Term Use Engineered with strength and stability in mind, the DREAMIZER license plate mount is built from premium materials to resist corrosion and withstand harsh outdoor elements. It offers superior durability and protection in all weather conditions, far outlasting standard plastic frames.. Integrated Waterproof LEDs for Enhanced Visibility Compliance Stay street-legal day and night. Our license plate holder features 3 bright, waterproof LED lights that clearly illuminate your plate number after dark or in low-light conditions, ensuring your UTVATV meets visibility requirements and enhances safety.. Universal Fit for Most UTVs, ATVs, Trailers More Designed for wide compatibility, the DREAMIZER bracket fits a vast range of vehicles including UTVs, ATVs, trailers, trucks, RVs, boats, and golf carts. It is compatible with popular models from Polaris RZRRanger, Can-Am Maverick, Honda, Yamaha, and many others.. Simple, Complete Installation Kit Included Everything you need for a secure rear mount is in the box. The DREAMIZER lighted license plate frame is designed for a straightforward, hassle-free installation on your vehicle, allowing you to set it up quickly and reliably for long-term use.. Sleek, Stylish Metal Design with Premium Finish Featuring a fashionable and unique design, this license plate holder is meticulously crafted with a smooth, defect-free finish that showcases a modern, premium metal aesthetic. Please note this frame is designed for standard-sized car plates, not motorcycle-sized plates..

Trailer License Plate Bracket- FBJTDQ Chrome License Plate Holder is made of high-grade Aluminum, is designed for replacing your plastic license plate holder, ensuring its heavy-duty and longevity. This license plate holder is designed to withstand harsh outdoor environments and resist rust and corrosion.The chrome-plated cover adds an aesthetic appeal to your trailer or truck, making it stand out from the rest. For Universal Truck License Plate- The bracket size is 9.5 x 5 x 0.6in, Upgrade trailer license plate holder Never rust,superior aluminum quality, it's longer years lifetime. Surface with anti-scratch protective film protecting shinny surface. With an installation dimension of 1-582-12 for the bracket and 48-58 for the license plate, Designed for Trucks, Trailers, RVs, Boats, Snowmobiles, ATVs, and Utility Trailers, This bracket is a perfect fit for all your needs. Complete Set- Include 1 pack Aluminum license plate light bracket, Machine License Plate Screws, can easily mount the trailer bracket to the 2 hole license plate light lamp assembly, ensuring easy installation and a secure fit. The Black plated screw caps match the universal license plate holder and add an extra layer of protection against the elements. Easy Mounting- First, remove the old license plate bracket and the license plate and taillight on it Secondly, use our new aluminum license plate holder, after removing the blue protective film on the surface, align the rear light screw, and fix the license plate bracket Finally, the vehicle license plate is installed and fixed. Easy Mounting- First, remove the old license plate bracket and the license plate and taillight on it Secondly, use our new aluminum license plate holder, after removing the blue protective film on the surface, align the rear light screw, and fix the license plate bracket Finally, the vehicle license plate is installed and fixed.

COMPLETE REGISTRATION SOLUTION All-in-one kit includes one durable 4 x 7.5 black license plate, complete mounting hardware, two sets of numerals 0-9, and one set of letters A-Z. Everything you need to display your registration number immediately.. BUILT FOR EXTREME CONDITIONS Manufactured from injection-molded high-impact PVC plastic. This heavy-duty plate is engineered to resist fuel spills, harsh UV rays, fading, and scratches from trail brush and debris.. STATE COMPLIANT Specifically designed to meet off-road licensing requirements for Minnesota MN, South Dakota SD, and North Dakota ND. Note Not for use in Wisconsin requires white plate.. HIGH VISIBILITY UNIVERSAL FIT Features 1.5-inch tall white adhesive decals that provide high contrast against the black plate for easy readability by trail officials. Mounts easily to bumpers, roll cages, or flat surfaces on almost any ATV, UTV, or Side-by-Side.. MADE IN THE USA Proudly manufactured in the United States, ensuring high-quality materials and craftsmanship for your off-road adventures..

Universal Compatibility Our street-legal turn signal and license plate holder kit is designed to fit a wide range of vehicles it is compatible with Polaris RZR Ranger, Pioneer, Talon, Can-Am X3, Kawasaki Teryx, Mule, Arctic Cat, CFMOTO, Golf Cart, LandMaster, Segway, and more. Saving your time by letting you skip the browsing. Auto Turn-Off Function Smart self-canceling turn signals automatically turn off after 5 flashes with a quick press perfect for lane changes or 22 flashes when held for 2.5 seconds3 flashes ideal for turns, eliminating the hassle of manual shutoff. No confusing manual switches. Plug Play Turn Signal Kit Pre-wired with extended cables for easy, no-splice installation lighted plate holder requires wiring on 246-seaters. No extra extensions needed. The pre-assembled harness and labeled light connector positions make installation quick and easy. Thicker wires ensure stable current flow. 110dB Horn The KEMIMOTO UTV turn signal kit features a powerful yet considerate 110dB horn designed to alert nearby vehicles and pedestrians without startling them. Its intuitive operation allows short or long pressessound activates when pressed and stops immediately upon release. The kit includes a matching flexible switch with laser-etched LED markings for easy visibility, even in low-light conditions. Package Includes The KEMIMOTO turn signal kit features an upgraded wire harness fits vehicles up to 220 inches with color-coded markings for easy installation. The kit includes all necessary accessories, including amber turning signal lights x4, Aluminum License plate holder with light x1 Excluding the license,110db horn x1, leftright rocker switch x1, hazard, horn switch x1, harness set x1, relay x1, nylon cable ties set x1, and an installation guide x1.

12SMD high brightness LED chips per lights for maximum illumination.. Working Voltage 12V, universal fit for any 12V cars, trucks, trailers, RV's.. Just fit the hole distance of the license plate, very simply 2 wires hook-up installation.. More than 300 brighter than original halogen bulb, built in stable current IC driver for longer lifespan.. Warranty fully ONE YEAR guaranteed for the manufacturer defect. Please check the fitment note application before purchasing..

Utility License Plate Bracket Meet your needs for installing car lights and license plates License plate light mount bracket is a standard bracket for many trailers and trucks license plate light This license plate bracket allowed you to mount on the back of the fender up higher. Premium Aluminum Construction Utility trailer license plate bracket is made of diamond plate aluminum material which has a cool impressive appearance Corrosion resistance for strength and longevity, rust-proof, weather-proof. Perfect size License plate holder perfectly fitting all U.S. Canadian license plates with 6x12 inch standard size The license frame is compact enough to fit trucks, trailers, RVs, snowmobiles, ATVs, and utility trailers Not for Boat Ship trailer. Easy To Install Our trailer plate bracket kit matches with license plate light of size 2 screw hole spacing We provide stainless steel license plate screws and nuts M618mm screws can easily mount the trailer bracket to the 2 hole license plate light lamp assembly. Complete Set Include 1 pack Aluminum license plate light bracket, Machine License Plate Screws, can easily mount the trailer bracket to the 2 hole license plate light lamp assembly, ensuring easy installation and a secure fit.

UPGRADE YOUR BIKE Add the perfect final touch and give your motorcycle a stylish, clean look with our flawless silicone bike tag frame. Bold and beautiful like you wouldn't believe with 8 juicy solid colors to choose from. Perfect for the discerning bike owner.. ORIGINAL PATENTED DESIGN Rightcar Solutions ensures the highest quality accessories for your motorcycle. Our unique and original proprietary design of silicone license plate frames for men and women offers flawless construction with even edges and surfaces. The perfect fit for any standard-issue plate.. PATENTED DESIGN Unique Proprietary Design. Flawless Construction. Even edges and surfaces. Perfect fit for any standard-issue plate.. RUST-PROOF, RATTLE-PROOF WEATHER-PROOF Enjoy the silence and confidently drive without scratching your paint. Silicone license plate covers frames are resistant to rust and deformation. Our bike frames have drainage holes that release water so your plates will never tarnish, ice over or lose shape. No matter how cold it gets.. 100 STREET LEGAL 4x7 inch - Standard size. Cops can pull you over for an obscured license plate With our license plate holder, youre 100 compliant. ZERO license plate obstruction. ZERO sticker obstruction. Drive safe and don't get stopped by the police..

OFF-ROAD DesignLicense plate is now securely mounted yet easily removable for winching. Protects your roller fairlead from debris and dirt.. Universal ApplicationZORASEN license plate mounting bracket is designed to fit US license plates, compatible with most trucks, pickups, SUV, Jeep, 4x4, cars.. MaterialAll made of high quality stainless steel. Black textured powder coat finish.. Package IncludedIncluded license plate mounting bracket Mounting Hardware.. INSTALLATIONEasy bolt-on to install. No drilling required..

Waterproof and LED lights - This utv license plate holder is equipped with one bright LED light, allowing others to clearly see the license plate number even in the dark night, making your vehicle street legal. And these lisences plate frame will not rust even if it is exposed all year round to wind and rain.. Premium Quality - Maiker ATVUTV license plate is made of high-grade aluminum, which is both durable and lightweight. This helps to protect your license plates from bending or corrosion.. Easy Installation - Install your plate frames in a few minutes No drilling or modifications required. It comes with screws and leaves just enough room for you to comfortably and effortlessly snap your license plate into place.. Universal Adaptability - Fits UTV, ATV, Trailer, Truck, RV, Boat, Golf Cart, Snowmobile, such as compatible with RZR Ranger General Maverick X3 Commander. Worry-Free Purchase - Maiker stands firmly behind our products and will be responsible for all quality issues. We are devoted to providing better shopping experience for customers, any problems, please contact us..

A high quality, HDP high density polyethylene mount plate. Includes all hardware for mounting in various positions. Tusk offers a License Light part number 1444830001 that can be used in place of one of the mount bolts to illuminate the universal plate.