Wall-mounted WiFi 6 access point with a built-in PoE switch.. WiFi6 4x4 MIMO. Powered using PoE.

Original brand product.. One-year warranty against factory defects..

Ubiquiti Networks UAP-AC-M 802.11AC IndoorOutdoor Wi-Fi Access Point with Plug Play Mesh Technology. With mesh multi-hop, you can can cover a large outdoor area with minimal infrastructure, with just a few mesh access points. Networking Interface 1 101001000 Ethernet Port Power Method. hese APs include adjustable dual-band omnidirectional antennas, but can be used with any 5 GHz omni antenna for spot-beam coverage in high-density locations with numerous APs and clients.. Multiple Power Options Compatible with 802.3af PoE Alternative A and 24V passive PoE. You can power it with an 802.3af Alternative switch, EdgePoint EP-R6, UniFi PoE Switch, or the included Gigabit PoE adapter..

4x4 MU-MIMO on 5GHz 1733Mbps Max PHY rate, 2x2 MIMO on 2.4GHz 300Mbps Max PHY rate.. 802.3af for base functionality. 802.3at required if using PoE pass-through.. 1x4 1 in, 4 out switched Gigabit Ethernet ports with configurable PoE pass-through port 1 only.. Networking interface 5 101001000 Ethernet ports. Four-stream 802.11AC Wave 2 technology. 802.3af802.3at PoE compatibility.. Dimensions 139.7 x 86.7 x 25.75 mm 5.5 x 3.41 x 1.01. weight 210 g 7.41 oz..

Ubiquiti Networks networks Unifi AC Lite AP Wi-Fi 802.22. 2.4 GHz Speed 300 Mbps, 5 GHz Speed 867 Mbps.

Up to 5X Faster with Dual-Radio 3x3 11AC MIMO Technology. Ubiquiti Unifi AP AC PRO UAP-AC-PRO-US 802.11ac PRO Wireless Access Point - Enterprise Wi-Fi System. The UniFi AC Pro AP supports simultaneous dual-band, 3x3 MIMO technology in the 5 and 2.4 GHz radio bands.. The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.. Install, configure, and manage all of the UniFi APs with the intuitive and user-friendly UniFi controller user interface..

Manage Your Networks from a Single Control Plane. Intuitive and Robust Configuration, Control and Monitoring. Remote Firmware Upgrade. Users and Guests. Guest PortalHotspot Support.

AX3000 Wi-Fi 6, Upgrades Everything. AP3000 provides 160MHz bandwidth and 1024-QAM for dramatically faster wireless connections. With a total networking speed of about 3000Mbps AP3000 is 2.5X faster than 802.11ac 2x2 dual-band access point.. Downlink Uplink OFDMA MU-MIMO Technology. With a revolutionary combination of DLUL OFDMA and MU-MIMO technology, AP3000 provides up to 8X2.4GHz to 16X5GHz greater network capacity and efficiency in traffic-dense environments.. Connect 100 Devices. Designed for connecting 100 devices, everyone is able to enjoy a more efficient network that loads faster without dragging down performance.. Multiple Power Options for Easy Installation. AP3000 supports 802.3at PoE or DC 12V power supply power adapter included , can be either powered by a PoE switch or PoE adapter the provided DC adapter, making deployment effortless and flexible.. Easy Install with the included mounting kits. Cudy AP3000 provides flexible and convenient installation methods, including ceiling-mount installation and wall-mount installation, which is convenient for customers to choose different installation methods according to the installation environment..

Connectivity technology Ethernet.

Ubiquiti 5-PACK UAP-AC-PRO PN UAP-AC-PRO-5-US. Important -5-Packs Do Not Include PoE Power Injectors.? Assumes use of PoE Switch or Must Purchase 802.3af PoE Separate. 3x3 11AC MIMO Dual Band 5 and 2.4GHz. 2 101001000 Ethernet with?5 GHz Speed 1300 Mbps and 2.4GHz Speed 450 Mbps. Indoor Outdoor Use See Outdoor Specifications for Details.

Indoor, dual-band WiFi 6 access point that can support over 300 clients with its 5.3 Gbps aggregate throughput rate.. Dual-band WiFi 6 802.11ax. 5 GHz 4x4 MU-MIMO band with a 4.8 Gbps throughput rate. 2.4 GHz 2x2 MIMO band with a 573.5 Mbps throughput rate. Operates at full 4x4 MIMO with 160 MHz bandwidth. 300 concurrent client capacity. Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion. Includes universal mounting plate, backing plate, and screw kit. PoE injector sold separately.

Ubiquiti NanoStation M5 locoM5 IndoorOutdoor airMAX CPE 5GHz High-Power 2x2 MIMO Point to Point PtP Bridging 2-PACK. The NanoStation M can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE. The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE.. With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.. 150 Mbps real outdoor throughput and up to 10km range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before..

Package Dimensions 8.76 L x 9.6 W x 22.97 H inches. Country of origin China. Model Number LOCOM2. Package Weight 1 pounds.

Ubiquiti Networks networks networks networks 2.4GHz Nano MIMO airman. Model Number NSM2. Country Of Origin China. Item Package Weight 1.0 lb.

Up to 5X Faster with Dual-Radio 3x3 11AC MIMO Technology. Ubiquiti Unifi AP AC PRO UAP-AC-PRO-US 802.11ac PRO Wireless Access Point - Enterprise Wi-Fi System 3-Pack. The UniFi AC Pro AP supports simultaneous dual-band, 3x3 MIMO technology in the 5 and 2.4 GHz radio bands.. The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.. Install, configure, and manage all of the UniFi APs with the intuitive and user-friendly UniFi controller user interface..

Enjoy real-time device insights and deep configuration options. Centrally manage multiple networks from an intuitive interface through the UniFi Network app. Personalize the design, architecture, and privacy of guest hotspots. Set up devices quickly and manage them on the go with a powerful mobile app.

Power Supply 5V. Power Method PoE 24V In on LAN Port 1 or 2A Micro USB Adapter Not Included. Supported Power Voltage 4.95-5.05V. Max. Power Consumption 5W. PoE Out Controllable 24V PoE Out 4, 5 -7, 8 on WAN Port. Management Interface Wi-Fi Ethernet. Networking Interface 4x 10100 Fast Ethernet Ports. LED Status. Max. TX Power 22 dBm. Antenna Gain 4 dBi.

Ubiquiti Network airCube ACB-AC airMAX 802.11ac Dual-Band Home Wi-Fi Access Point PoE 24V InOut. With a compact design and integrated 24V PoE passthrough, the airCube is a home Wi-Fi access point designed to interoperate with airMAX CPEs and is available in two models.. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points.. airMAX Home Wi-Fi Access Point. Ethernet Ports 4x Gigabit.

Ubiquiti airCube ac ACB-AC-US airMAX 802.11ac Dual-Band Home Wireless Access Point PoE 24V IndoorOutdoor. With a compact design and integrated 24V PoE passthrough, the airCube is a home Wi-Fi access point designed to interoperate with airMAX CPEs and is available in two models.. Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points.. The airCube can be powered by and provide power to an airMAX CPE using 24V PoE.. Use the intuitive UNMS Mobile app for iOS and Android to install and configure airCube..

Wi-Fi 6 802.11ax. 2.4 GHz 5 GHz Dual-Band. Includes PoE Adapter. Wall Pole Mounting Kits Included. Up to 5374 Mbs Throughput.

UPC 817882029629. Weight 2. 500 lbs.

2x2 high-efficiency Wi-Fi 6. 5 GHz band 2x2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps. 2.4 GHz band 2x2 MIMO with radio rate of 300 Mbps. Gigabit Ethernet, powered with 802.3af PoE. 802.3af PoE adapter not included.

Expert Pre-Configuring Applied to a set of two airMAX NanoStation 5AC Loco Devices to work as a Point-to-Point Wireless Bridge.. Bundle Includes Configuration Applied, 2 Paired airMAX NanoStation 5AC Loco Ubiquiti, 2 POE Injectors with Power Cords, 2 Straps, Installation Guide.. Meticulously optimized by our team of experts for unparalleled performance.. Do Not Reset the Devices to Factory Setting, this will result in the lost of the Configuring Applied.. Create a seamless and high-speed point-to-point wireless connection effortlessly..

Expert Pre-Configured Bundle A set of two NanoStation Loco M5 devices, meticulously optimized by our team of experts to function as a Point-to-Point Wireless Bridge.. Bundle Includes Configuration Applied, 2 Paired NanoStation Loco M5 Ubiquiti, 2 POE Injectors with Power Cords, 2 Straps, Installation Guide.. Robust Performance Experience unparalleled performance with the expert pre-configured NanoStation Loco M5 bundle.. Maintain Configuration Important Do not reset the devices to factory settings as this will result in the loss of the applied configuration.. Seamless High-Speed Connection Create a reliable and high-speed point-to-point wireless connection effortlessly..

Two installation methods This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you.. 150 degree adjustment The rod of wireless bridge bracket mount can be adjusted up and down by 150. After you install the CPE, adjust the angle of the rod to receive signals of different strengths.. Firmness This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.. Waterproof The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. Its very suitable for outdoor use.. Wide application This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..

AX3000, Faster, Farther,More StableFeatures up to 600mW of power and an enhanced receiver design,Up to 256 devices.Supports dual-band maximum speed up to 5GHz 1201Mbps and 2.4GHz 574Mbps, avoiding wireless interference congestion and offering lightning-fast Internet speed. you can enjoy HD videos, smooth gaming, etc. even outdoors.. Multiple Modes, Flexible UseYou can install it anywhere you want,Place as you like,Equipped with IP67 waterproof enclosure, 15kV ESD protection and 6kV lightning protection, it can work normally in rainsnowwindthunder and other bad weather. Supports Mesh, AP, Router, Repeater, APRepeater and other modes to meet your different needs and apply to more outdoor use scenarios.. Seamless WiFi RoamingThe 4x8dBi Fiberglass tube high-gain antennasomnidirectional antennas and two built-in high-power amplifiers provide extreme WiFi coverage and penetration,greatly expanding the WiFi coverage, and eliminating every network dead zone.design for more strong penetration longer range coverage, ideal for providing Wi-Fi service in big area such as Home,Camping,Factory, Community, Street.. Optional PoE Power SupplySupports 802.3AFAT active PoE and passive PoE, transferring data and charging the product with a single Ethernet cable, so you can install the product outdoors where power outlet is not available,Give you more choice of installation locations. Note The PoE converter is not waterproof. Please use CAT5E or above cable and the length should not exceed 100m328ft.. About After SalesPlease feel free to contact us in the buyer communication if you have any question.Phone support 18889730883 UTC-5 Mon -Fri 9AM -6PM. email support Contactwavlink.com. We will provide solutions within 8 h,12-month worry free warranty and life-long technical support..

Wide Application with 2 Adjustable Mount Brackets The CPE366 Wireless Bridge comes with two adjustable mounting pole kits for easy installation of your wireless ethernet bridges on walls or poles. It ensures optimal signal positioning for your outdoor CPE and point-to-point wireless bridges outdoor setups, ideal for diverse installation environments.. Seamless High-Speed Connectivity With both 100Mbps and 1000Mbps LAN ports, the CPE366 WiFi bridge enhances data transfer rates significantly. This WiFi bridge provides seamless streaming, gaming, and large file transfers, making it the perfect choice for modern networking needs and wireless internet bridge applications.. 3KM Long-Range Transmission Equipped with a 16dBi high-gain antenna, the CPE366 wireless bridge supports point-to-point wireless bridges outdoor connections up to 3,000 meters Line of Sight. It is ideal for large-scale environments like factories and warehouses, eliminating the need for costly buried cables.. 5.8GHz for High-Speed Connectivity Operating on 5.8GHz, this WiFi bridge offers speeds up to 900Mbps and a LAN data rate of 433Mbps. With excellent anti-interference and low latency, it ensures optimal performance for voice, video transmission, and wireless internet bridge applications in demanding environments.. Multi-Functional CPE366 for Extensive Connectivity The AdaLov CPE366 wireless bridge supports multiple modes, including PTP, PTMP, AP, and Bridge, making it perfect for long-range wireless needs in industrial settings, rural areas, and construction sites, where reliable wireless ethernet bridges are crucial.. Affordable Link Sharing The CPE366 is an economical solution for connecting devices like security cameras, Starlink, and buildings. It maximizes communication efficiency and reduces the need for expensive cable infrastructure, offering affordable wireless ethernet bridges for both residential and industrial use.. IP65-Rated for Outdoor Durability With an IP65 waterproof and dustproof rating, the CPE366 outdoor CPE is built to withstand harsh weather conditions. It's perfect for extending your network to remote locations, such as garages, barns, shops, or surveillance systems, with reliable WiFi bridge performance even in challenging environments.. Suitable for Various Scenarios The CPE366 wireless internet bridge extends networks to farms, garages, or building-to-building connections. It supports surveillance systems and integrates with Starlink, providing seamless connectivity and easy internet sharing with neighbors.. Effortless Network Expansion The CPE366 wireless internet bridge supports 12V DC power not included and 24V POE with two included POE adapters. This makes it simple to deploy in remote locations without nearby power outlets, facilitating easy expansion for point-to-point wireless bridges outdoor without extensive network rewiring.. Comprehensive Package Contents The CPE366 package includes 2 wireless bridges, 2 adjustable mounting brackets, 2 POE adapters, metal cable ties, network cables, and a user manual, providing everything you need for quick and reliable installation of your WiFi bridge or wireless ethernet bridges..

1.3 GHz dual-core processor now upgraded to support full-duplex 1 Gbps TCPIP performance.. Four-stream high-efficiency Wi-Fi 6 technology.. 5 GHz band 4x4 MU-MIMO and OFDMA with radio rate of 2.4 Gbps.. 2.4 GHz band 4x4 MIMO with radio rate of 600 Mbps.. Powered with 802.3at PoE PoE injector not included..

Ubiquiti Networks networks networks networks Unifi AP AC in wall.