Provides ultimate brute strength for disassembling even the most seized U-Joints in minutes on virtually all medium duty trucks, school buses, farm and light industrial vehicles.. Application Commonly found on class 3-5 trucks and equipment. For use with Ram 35005500, for use with Chevrolet 35005500, for use with Ford F-350550, for use with Isuzu NPR etc.. U-joints with bearing cups 1.25 inches to 1.7 inches O.D., Spicer SPL 90 100 Series.. Manufactured from high-grade materials for strength and durability Eliminates dangerous vice-and-socket or hammering methods. Reduces risk of damage to the driveshaft, yokes, joints or bearing caps.. The manufacturing and metal treatment processes ensure threads will hold up under even the most extreme conditions, commonly found in stubborn and seized U-Joints.. Each glove is cast from high-grade steel to ensure the most universal fit possible while still maintaining the strength to tackle even the most stubborn U-Joints. Engineered for use with a 1 inch impact tool. Tiger Tool provides quality, experience, and reliability you can count on..

The Tiger Tool 10105 provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all cars, light-duty trucks and farm machinery.. Application Commonly found on class 1-2 trucks, cars and equipment. For use with Ford F-150350, for use with Chevrolet 15003500, for use with Ram 15003500, etc.. The 10105 works with U-joints that have bearing cups between 1 to 1.25 O.D. Please note Damage to flange style yokes may occur if bearing cups are severely seized. The 10105 is not compatible with Double Cardan joints. To service Double Cardan joints see Tiger Tool 10205.. The Tiger Tool 10105 is Manufactured from high-grade materials for strength and durability. This tool eliminates dangerous vice-and-socket or hammering methods and reduces risk of damage to the driveshaft, yokes, joints or bearing caps.. Our proprietary manufacturing and metal treatment processes ensure that the threads will hold up under even the most extreme conditions which are commonly found in seized u-joints. We take our U-Joint Pullers seriously, each glove is cast from high-grade steel to ensure the most universal fit possible while still maintaining the strength to tackle even the most stubborn u-joints.. The Tiger Tool Automotive UJoint Removal Tool, part number 10105, is proudly made in North America to ensure you have what it takes to get the job done right..

EFFICIENT DUAL CAP INSTALLATION Revolutionize u-joint service with the ability to install two bearing caps simultaneously, streamlining the process for medium and light-duty u-joints. Compatible with a -inch impact gun or hand wrench, this tool simplifies each job and ensures precision and saves time.. VERSATILE COMPATIBILITY Commonly found on class 1-2 trucks, cars, and equipment. For use with Ford F-150350, for use with Chevrolet 15003500, for use with Ram 15003500, etc.. Works on Bearing caps with a minimum diameter of .85. This tool has a Max opening of 5.675 and a throat depth of 2.2.. INNOVATE DESGN FOR EASE OF USE Using the Bearing Cap Installer is simple. Featuring an encased magnet that holds the new bearing cap in place over the yoke assembly, opposite the forcing screw. The plunger found at the end of the forcing screw allows for positioning of the second bearing cap. By applying an impact or hand wrench to the forcing screw, the first bearing cap is secured in place, allowing for the installation of the first retaining clip. After rotating the u-joint, the process is repeated.. BUILT TO LAST Crafted from high-grade steel, this tool doesn't just promise exceptional durability it delivers. Designed to withstand the rigors of frequent use, it ensures long-lasting performance and reliability, making it an indispensable tool in your kit.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

VERSATILE POWERFUL Elevate your mechanical work with our C-Frame Socket Press, engineered for both removal and installation tasks across a spectrum of driveline and non-driveline needs. Its robust design ensures it's an indispensable asset in your toolkit, perfect for professional and DIY projects.. BROAD APPLICATION Designed to be versatile, this tool is indispensable for mechanics working on class 1-2 trucks, cars, and heavy equipment. For use with Ford F-150350, for use with Chevrolet 15003500, and for use with Ram 15003500. This tool excels with universal and Double Cardan Joints, wheel studs, and suspension bushings.. COMPREHENSIVE ACCESSORY SET Our Socket Press comes with an extensive selection of plungers and flat anvils, making it capable of handling any socket size with 14, 38, or 12 drives. Socket sizes can be used in any combination for service. They can be installed into either end of the press, allowing the tool to be used for numerous clamping or pressing applications.. UNMATCHED DURABILITY PERFORMANCE Constructed with a drop-forged C-frame with a 4.5-ton capacity, this tool is built to withstand heavy use and provide consistent performance. Manufactured from high-grade steel to ensure strength and durability, making it reliable. To prevent galling and maintain smooth operation, this tool features hardened self-lubricated steel components, enhancing the longevity of the tool, and ensuring optimal performance.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction. CA Patent No. 3015834, US Patent No. 10744627, AU Patent No. 2017225956, EU Patent No. 3423238..

12-Ton Hydraulic Press Featuring a 12-ton capacity, this hydraulic press makes metal bending, straightening, and stamping tasks easier and more efficient. Its robust design ensures reliable support for various operations, whether in professional workshops or home DIY projects.. User-Friendly Operation Designed for ease of use, the hydraulic press operates smoothly with a long handle for the bottle jack. Simply press or lift to apply pressure, making metalworking tasks simpler. The built-in relief valve ensures safe, controlled operations, preventing overpressure damage.. Versatile Work Range The press offers a working range of 1.6 to 27.8, perfect for diverse applications. Users can easily adjust the height with the convenient pin system, ensuring flexibility for different workpieces and enhancing work efficiency during each pressing operation.. Durable Sturdy Construction Crafted from heavy-duty carbon steel with an H-shaped frame, this press offers stability and strength to prevent wobbling during use. The powder-coated finish resists rust and corrosion, ensuring durability for long-term, reliable performance in demanding environments.. Enhanced Precision Safety The precision springs provide a slow, controlled rebound after each press, while the treated piston-ram resists skiving. The integrated overload safety valve automatically prevents damage from excessive pressure, ensuring secure and efficient operation at all times..

Great Compatibility Suitable for bearing cups ranging from 1 to 1.25 , this universal joint puller is compatible with most Class 6 and 8 trucks and machinery, offering versatile use in various scenarios.. Upgraded and optimized The legs are raised and thickened and heat-treated to make it stronger and less prone to bending. Thicken the stress surface so that it is not easy to break.. Heavy-Duty Construction Crafted from sturdy tool steel with a black anodized finish, our U-Joint puller is built to withstand extreme conditions. It ensures superior durability and corrosion resistance, ensuring long-lasting performance.. Wide Application This tool is versatile for various applications, including removing gaskets, springs, oil seals, and O-rings from automobiles, enhancing its usability.. More efficient and labor-saving The package comes with a socket that used with up to a 12 inch wrench..

PRECISION DESIGN The Tiger Tool 75 Degree Snap Ring Pliers part number 70301 feature a unique jaw specifically tailored for the effortless removal and replacement of Hotchkiss-style snap rings on universal joints. This design ensures a smooth operation, saving time and effort during maintenance tasks on a variety of vehicles.. WIDE COMPATIBILITY Commonly found on class 1-5 trucks, cars, ATVUTV and equipment. For use with Ford F-150550, for use with Chevrolet 15005500, for use with Ram 15005500, etc... RELIABLE PERFORMANCE Equipped with an angled tip, these Snap Ring Pliers are adept at breaking loose, removing, and replacing even the most corroded snap rings. Their robust construction ensures reliable performance across a wide array of vehicles and equipment, extending the tool's usability and lifespan.. MULTIPURPOSE ITILITY Beyond snap rings, these pliers are also effective in removing plastic push-pin retainers found on numerous late-model cars. This dual functionality makes the pliers a versatile addition to your toolkit, catering to a wide range of maintenance needs across different makes and models.. QUALITY ASSURANCE Tiger Tool is renowned for its commitment to manufacturing high-quality, reliable tools. These Snap Ring Tool Pliers are no exception, embodying the durability and effectiveness required to tackle diverse maintenance tasks with confidence and precision..

10102 U-Joint Puller Use with up to a one-inch impact wrench and work with U-Joint bearing cups from 1.5 to 2.2. Provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all Class 7 and 8 trucks and machinery. Does not damage the driveshaft, yokes, joints, or bearing cups.. 5192 Bearing Cup Installer Quickly and easily installs bearing cups on bolt-retained universal joints and automatically aligns bearing cups during installation. Fits for series 1610 to 1880 and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups.. Superior Quality Premium grade heavy duty carbon steel with black anodized finish, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.. Great Compatibility Fit for Spicer drivelines 1610 1710 1760 1810 1880 Meritor Rockwell 16N 17N 18N 1710 Spicer SPL 140 170 250 Life Series Meritor RPL 20 25 Permalube Series. Fit virtually all Class 7 and 8 Trucks and Machinery. 100 Satisfaction Guarantee If you're not 100 satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

WHEEL BEARING PULLER SET This wheel bearing tool kit by Orion Motor Tech provides everything you need to let you quickly and easily remove and install your wheel bearings without hammering and front-end alignment, Please lubricate the rod to protect the threads. UNIVERSAL COMPATIBILITY Our versatile wheel bearing press kit offers multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, whether foreign or domestic. QUICK EASY OPERATION Two 8.8 grade sliding screws with precision threading firmly hold your bearings and let you smoothly pop them out without damage, leaving the steering knuckle and strut assembly untouched. DURABLE CONSTRUCTION Made of premium stainless steel, this wheel bearing removal tool set provides strong and dependable long-lasting service the sliding screws are heat treated and blackened for superior strength and corrosion resistance. COMPACT PORTABLE This 24 piece front wheel bearing press tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.

1, EASY OPERATION The ORION MOTOR TECH Ball Joint Press Set with 4x4 Adapters effortlessly removes press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm.. 2, UNIVERSAL COMPATIBILITY Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 12 and 34 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC, and Jeep vehicles.. 3, PROFESSIONAL-GRADE DURABILITY Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.. 4, ALL-IN-ONE TOOL SET 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. 5,PROTECTIVE CARRYING CASE Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know..

PRECISION DESIGN The Tiger Tool Straight Snap Ring Pliers part number 70300 feature a unique jaw specifically tailored for the effortless removal and replacement of Hotchkiss-style snap rings on universal joints. This design ensures a smooth operation, saving time and effort during maintenance tasks on a variety of vehicles.. WIDE COMPATIBILITY Commonly found on class 1-5 trucks, cars, ATVUTV and equipment. For use with Ford F-150550, for use with Chevrolet 15005500, for use with Ram 15005500, etc... RELIABLE PERFORMANCE Equipped with a straight tip, these Snap Ring Pliers are adept at breaking loose, removing, and replacing even the most corroded snap rings. Their robust construction ensures reliable performance across a wide array of vehicles and equipment, extending the tool's usability and lifespan.. MULTIPURPOSE ITILITY Beyond snap rings, these pliers are also effective in removing plastic push-pin retainers found on numerous late-model cars. This dual functionality makes the pliers a versatile addition to your toolkit, catering to a wide range of maintenance needs across different makes and models.. QUALITY ASSURANCE Tiger Tool is renowned for its commitment to manufacturing high-quality, reliable tools. These Snap Ring Tool Pliers are no exception, embodying the durability and effectiveness required to tackle diverse maintenance tasks with confidence and precision..

Professional Ball Joint Tool Set -- Easily remove and install stubborn press-fit upper and lower ball joints, U Joints and brake anchor pins on most vehicles without removing control arm from the vehicle.. Widely Compatible -- 23pcs ball joint removal tool features a wide range of receiver tubes and adapters, fits most 2WD and FWD vehicles, including GM, Chrysler, Ford, Jeep, Dodge, and more. Suitable for professional and DIY mechanics use.. Professional Craftsmanship -- Designed with special clamping or separating tools, the precise construction is designed to provide an even and straight force that will allow you to press out joints quickly without damaging the joint or surrounding components.. Special Design -- Addition of 4-point sockets 1-5964-inch and 2-964-inch to remove and install special threaded upper ball joints on many Chrysler vehicles.. RELIABLE MATERIAL -- Ball joint press made of premium steel with high strength and rust resistance for long-lasting performance. Blow molded case keeps the tools securely organized and easy to transport.. Package includes 11 adapters, 1 plug, 1 ball joint press, 1 installation adapter, 1 installation cup, 1 installation cup adapter, 1 receiving cup, 3 receiving tubes, 1 removal adapter, 1 screw and 1 socket.

Heavy duty forged ball joint press kit is excellent for removal and installation of press-fit parts such as ball joints, U joint and brake anchor pins for most 2WD and 4WD cars and light trucks. Heat treated C clamp puller can excellent press rusted parts effortlessly.. This ball joint removal tool can be used to remove upperlower ball joints, install upperlower ball joints, removeinstall brake anchor pin, disassembleassemble universal U joints.. The heavy duty 4-wheel drive u joint removal tool is compatible with most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars. It allows service for 12 and 34 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC and Jeep vehicles.. Package Included Ball Joint Tool 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. Blow Mold Carring Case The ball joint removal tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Premium Quality Construction The u joint removal tool is constructed from heavy-duty carbon steel, featuring black anodic oxidation for exceptional anti-rust performance. This ensures the tool is not only sturdy but also highly resistant to rust, contributing to its long-lasting quality.. Comprehensive Package Contents The ball joint press kit includes a range of essential components, such as 1 C-frame press, 1 screw, 1 install cup adapter, 1 receiving cup, 1 installing cup, 3 receiver tubes 2-14x2-34x3, 1-34x2-14x2-12, and 1-34x1-34x2, 1 installation adapter, and 1 removal adapter. This comprehensive package ensures you have the right tools for the job.. Versatile and Efficient Functionality This professional forged steel ball joint press tool set is exceptional for both the removal and installation of press-fit parts like ball joints, universal joints, and truck brake anchor pins. It's a versatile and efficient solution for a wide range of applications.. Wide Range of Applications The heavy-duty 4-wheel ball joint press kit is suitable for use with most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that feature press-fit type ball joints. Additionally, it includes a 4-wheel drive 4WD adapter that allows service for 1967 through current 12 and 34 ton 4WD vehicles equipped with the Dana 30 or 44 front axle, which are commonly found on Ford, GM, IHC, and Jeep vehicles.. Convenient Storage Case The ball joint separator tool set is thoughtfully packaged in a heavy-duty storage case. This case features precision-sized compartments for each piece, offering an organized and secure storage solution. It's also designed for easy transport while extending the life of the entire tool set..

PRACTICAL FOR U-JOINTS The ABN Sealed U-Joint 1.5 to 2.2 Inch Cup Puller Removal Tool for Spicer Meritor Rockwell Class 7 8 Truck Machinery quickly and easily removes sealed U-joint cups. NO DAMAGE, NO DANGER Removes rusted and corroded bearings easily and mechanically without damage to the U-joint components driveshaft, yokes, joints, or bearing cups Eliminates dangerous vice and socket method and hammering method. HEAVY-DUTY BRUTE STRENGTH Engineered for use with up to 1 inch impact wrench providing the ultimate strength for disassembling drivelines Approximate 7 Ton 6.4MT capacity. EASY TO USE Disassemble stubborn U-joints by pulling until you hear a pop noise As with any puller, use in conjunction with lubrication if it is not able to force the part free on its own Remove a stubborn bearing cap with lubrication or heat applied to the yoke While a new U-joint will break free with an impact tool, frozen parts are best set free by hand tools. FITMENT Fits U-joint bearing cups 1.5 to 2.2 inches and will fit nearly all Class 7 and 8 trucks and machinery Compatible with all Spicer drivelines 1610, 1710, 1760, 1810, 1880, Spicer SPL 140, 170, and 250, Life Series Meritor Rockwell 16N, 17N, 18N, 1710 Meritor RPL 20 and 25 Premalube Series.

Ball joint press kit removes and installs press-in ball joints on most cars and light trucks. Ball joint C-frame presses feature 3X the throat space to press out ball joints without removing the top-mounted grease fittings. Ball joint tool set is compatible with large ball joints on pickup trucks and works with multiple larger adapters that can't be installed on standard C-frame presses. Ball joint press tool includes long and short drive screws for flexibility when needed. With a carrying case,easy for storage. Made of premium forged steel.

EASY OPERATION Use our 21PCS Ball Joint Press Set with multi-size adapters to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. UNIVERSAL COMPATIBILITY This tool set works with most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, or vehicles with the Dana 28, 30, 35, 44, 60 axles.. PROFESSIONAL-GRADE DURABILITY Built to last with heavy-duty forged carbon steel with anti-rust black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion.. ALL-IN-ONE TOOL KIT 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tubes, 1x Removal Adapter, 1x Screw, 1x Sleeve.. PROTECTIVE CARRYING CASE Each component is contained in a heavy-duty ABS plastic blow-molded carrying case with handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know..

Impressive Press This bearing clamp installs bearing cups on U joints Use the pressure of the forcing bolt to provide clearance for the insertion of the retaining rings. Drive Shaft Doctor Performing essential U joint installation tasks is easy thanks to this tool Use this bearing clamp to correctly connect the U joint and drive shaft. For Magnetic Mechanics The end of the forcing bolt and the closed end of the clamp both have magnets that hold the U joint ends in place while installing the bearing cups. Make It Quick The bearing cup installer design allows for the installation of 2 bearing cups at a time without damaging the bearing or drive shaft Save time by working on 2 at once. No Need For Benchtop Presses Avoid using spare sockets and tabletop presses This U joint tool presses bearing cups with the use of a 12 inch drive impact wrench or smaller.

Premium Quality The ball joint press kit is made of high carbon steel with a black oxide finish for maximum strength and longevity, resisting rust and other corrosion. This strength allows its adapters to safely remove even severely rusted-out or corroded parts.. Function The master ball joint service adapter set is excellent for the removal and installation of press-fit upper and lower ball joints, U-joints, and truck brake anchor pins. without needless time-consuming removal of control arms.. Wide Compatiblility This ball joint press kit is compatible with most Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, and Plymouth trucks, vans, minivans, and SUVs up to 1997 including Chevy Blazers Dodge Rams and Ramchargers Ford Broncos, F-150s, F-250s, F-350s, and Rangers and Jeep Cherokees, Comanches, Wagoneers.. Package Included Our ball joint removal tool contains 2 x receiving cups 2 x installing tubes 1 x removerinstaller 8 x receving tubes 1 x plug bolt. Storage Case The ball joint removal tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Great Compatibility Compatible with Spicer drivelines 1610 1710 1760 1810 1880 Series, Spicer SPL 140 170 250 Life Series, Meritor Rockwell 16N 17N 18N 1710 Series, Meritor RPL 20 25 Permalube Series. Fit for Kenworth, Peterbilt, Freightliner, Volvo, Mack and virtually all Class 6 to 8 trucks, machinery and heavy equipment. Perfect Design Provides ultimate brute strength and the most effective mechanical advantage, effortlessly disassembles seized U-Joints in minutes. Eliminates dangerous vice and socket, or hammering methods, significantly reduces risk of damage to the driveshaft, yokes, joints or bearing caps.. Special Features Works with U-Joints that have bearing cups from 1.5 to 2.2 O.D., used with a 1-inch impact wrench for a smooth and damage-free operation. Provides a safer, faster and preciser alternative to traditional methods.. Superior Quality Advanced premium grade CNC machined heavy duty carbon steel with black anodized, superior strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation, high precision and hardness to withstand tough conditions for optimal performance and long-lasting reliability.. 100 Satisfaction Guarantee If you're not 100 satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

PRODUCT SIZE This U-shaped CV axle removal tool has the opening size of 63 mm2.5inch and 3.3inch depth which can pry joints out with hidden retaining rings from vehicles, satisfy your needs.. EASY TO USE Attach the CV joint fork removing adapter to your slide hammers with 58-inch x 18 threadsnot included in the package, then position the adapter around the shaft behind the inner boot. Use the slide hammer to create torque to pull out the axle. Easy, yet powerful.. BENEFITS Unlike pry bars, this CV joint axle removing tool is designed more easier and simpler to remove axle without damaging the roller bearing inside the joint. Services the wide-style inner CV joint assembly, found on 4WD and other vehicles.. WIDE APPLICATION Applications include, but are not limited to 1997-2017 Ford 4.2L, 4.6L, 5.4L, 2010-2014 Ford SVT Raptor 6.2L, 1997-2017 Ford Expedition 4.6L, 5.4L, 2007-2015 Lincoln Navigator 5.4L.. PREMIUM MATERIAL This CV joint fork removing adapter is made of high hardness carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life..

Heavy-Duty Applications It is a 10pcs heavy-duty press tool set for Ball Joint that can withstand the most challenging tasks, ensuring durability and long-lasting performance. perfect for frequent users who need a sturdy and durable tool, It's an ideal tool for various vehicles, excellent for removal and installation of press-fit parts such as ball joints, U joint, Control arm bushing and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks. Hardend C Clamp Puller can excellent press rusted parts effortlessly.. Complete with Adapters Our hd ball joint installation tool with 4 wheel drive adapters, making it compatible with a broad range of four wheeler vehicle models. It gives you the flexibility and convenience needed to get the job done right. Fit most American domestic and imported car SUV ATV UTV semi pickup and light truck and Fit on Ford, GM, Dodge Ram, IHC and Jeep vehicles.. Robust Construction Crafted with high-grade materials, this ball joint press kit promises heavy-duty performance, enabling you to tackle even the most stubborn ball joints and bushings. Upper and Lower Control Arm Ball Joint Removal Tool be able to Remove UpperLower Ball Joints, Install UpperLower Ball Joints, RemoveInstall Brake Anchor Pin, DisassembleAssemble Universal U Joints.. Package include 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. 4 in 1 ball joint service kit tool set Four Wheel Drive Is Made of Strong Carbon Steel, Instruction In English Included ,Plastic Carrying Red Case Package..

4-IN-1, 4 wheel drive ball joint removerinstaller kit.. Perfect for 4WD ball joint servicerepair. 1 C frame press 1 C frame screw. Excellent for removal and installation of press-fit parts such as ball joints. Universal joints and truck brake anchor pins.. It will also remove rusted and corroded parts. High impact blow molded storage case included.. Set contains C-frame press, 3 receiver tubes sizes 2-34x3, 2-14x 2-12 1-34x2, installation and removing adapters..

The MT Ball Joint Press Set with 4x4 Adapters makes removing press-fit parts like ball joints, U-joints, brake anchor pins, and more a breeze on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm.. Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 12 and 34 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC, and Jeep vehicles.. Made from high-quality alloy steel material, this bearing separator is highly durable, rust-resistant, and scratch-resistant, ensuring a longer product lifespan.. Ball joint tool kit is enclosed inside a heavy-duty plastic blow-molded carrying case. Besides, with the convenient handle, it is for easy storage and quick organization.. At MT MoreTechData, we stand behind the quality of our tools. If you experience any issues, please don't hesitate to contact us. We want to ensure you're only getting the best tools for the job..

Applicable Models The 23 pcs ball head extractor and U-joint disassembly kit Replacement for most 2WD 4WD cars trucks SUVs. Package Includes 23 pcs ball head extractor and U-joint disassembly kit. Product Material The 23 pcs ball head extractor and U-joint disassembly kit is made of steel, strong, long in service life and simple to install. Reference Part Number Replacement for 648617. Note Our 9-inch C-frame press has a 6-inch opening and an ultra-long screw jack, which will not damage other parts.

Essential Tool for Ball Joint Service weyleity's ball joint press kit is an indispensable tool for your garage, designed to effortlessly remove press-fit components like ball joints, U-joints, and brake anchor pins without the need to disassemble your vehicle's control arm.. Professional Grade Quality Trust in weyleity's commitment to quality and durability. Crafted from heavy-duty forged steel with a corrosion-resistant black-oxide finish on adapters, this ball joint press kit is built to last, resisting rust and corrosion, making it the choice of off-road enthusiasts, novices, and professional mechanics alike.. Universal Compatibility This versatile ball joint removal tool kit is universally compatible with a wide range of American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks. It even includes a 4WD adapter for servicing 12 and 34 ton 4WD vehicles equipped with Dana 30 or 44 front axles, found in popular brands like Ford, GM, Dodge, IHC, and Jeep, dating back to 1967.. Package Content The ball joint press kit includes 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, and 1x Installing Cup.. Storage Case This ball joint separator tool set is housed in a durable storage case featuring meticulously-sized compartments for each component. This not only simplifies storage and transportation but also extends the longevity of the tool set..

Remove on a Multitude of Models Remove stubborn seized u joint cups on most class 7 and 8 trucks with our heavy duty u joint tool. Gentle On Vehicles Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing this u joint tool No need to use hammering or heating methods. Easy To Use The heavy duty u joint removal tool can be used with a 1-inch drive impact wrench or smaller Yokes easily fit into the 1.5 to 2.2 inch outside diameter bearing cup. Durable Build Quality Easily torque the u joint removal tool to remove a seized back or front driveshaft U-joint Built to hold up to frequent heavy duty use. Keep Money in Your Pocket Working on a budget doesnt mean you have to sacrifice quality This joint puller is a cost-effective option to get the job done right.

The Ultimate Ball Joint Press Kit This ball joint tool kit installs and removes press-fit parts on most vehicles, including ball joints, U joint, and brake anchor pins. Broad Applications U joint removal tool with adapters for use on upper and lower ball joints on GM, Ford, and Chrysler 2WD and 4WD light duty trucks, vans, and SUVs. All Access Compact design for tight spaces Includes adapters with specialized cut-outs to easily maneuver around obstructions. Heavy Duty Ball Joint Removal Tool The included C frame is constructed with a durable steel alloy for the toughest ball press removal Ball joint tool set even works on rusted, seized joints. Convenient Storage This ball joint kit comes in a sturdy case for secure storage in your garage or shop until you need it Easily take your ball joint adapter kit where the job takes you.

GREAT COMPATIBILITY - Provides ultimate brute strength and the most effective mechanical advantage for disassembling even the most seized u-joints in minutes on virtually all class 1-3 cars, light-duty trucks and farm machinery. Compatible with Ford F-150350, Chevrolet 15003500, Ram 15003500, etc.. PERFECT DESIGN - Provides a safer, faster and preciser alternative to traditional methods, effortlessly disassembles seized U-Joints in minutes. Eliminates dangerous vice and socket, or hammering methods.. SPECIAL FEATURES - Works with U-Joints that have bearing cups from 1 to 1.25 O.D., used with a 12 inch impact wrench for a smooth and damage-free operation. Note This 10105 is not compatible with Double Cardan joints.. SUPERIOR QUALITY - Advanced premium grade CNC machined heavy duty carbon steel with black high precision and hardness to withstand tough conditions for optimal performance and long-lasting reliability..

Easy Operation Effortlessly remove press-fit parts like ball joints, U-joints, and brake anchor pins on most 2WD and 4WD vehicles using our 21PCS Ball Joint Press Set with multi-size adapters, without the need to remove the control arm.. Universal Compatibility Designed to work with most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans, SUVs, and vehicles with Dana 28, 30, 35, 44, and 60 axles, providing versatile application across different models.. Professional-Grade Durability Constructed from heavy-duty forged carbon steel with anti-rust black-oxide finished adapters, ensuring maximum strength, longevity, and resistance to rust and corrosion.. All-In-One Tool Kit Includes 9 adapters, center rod, C-frame, install adapter, install cup, receiving tubes, removal adapter, screw, and sleeveeverything you need for various tasks in one complete set.. Protective Carrying Case Comes with a durable ABS plastic blow-molded carrying case with a handle, ensuring safe storage and easy organization of all components. Customer satisfaction guaranteed, with support available for any questions or concerns..

COMPREHENSIVE 23-PIECE SET CARVALAX versatile ball joint press kit includes all essential components, installation adapters, sockets, tubes, cups, a heavy-duty 9 C-frame press HRC32-38 with a 6 opening, and an extra tough pressure screw HRC28-36, ensuring the right tool is available for any ball joint removal or installation task.. DURABLE CONSTRUCTION Crafted from premium forged and blackened carbon steel, this kit is designed for long-lasting durability and strength against corrosion and rust, making it perfect for both professional mechanics and DIY enthusiasts.. EASY TO USE The kit features a straightforward setup that makes the process of pressing in and out ball joints quick and efficient, saving time on repairs and enabling you to efficiently remove and install ball joints and universal joints without damaging surrounding components.. WIDE COMPATIBILITY Suitable for a variety of vehicles, including most 2WD4WD cars, trucks, and SUVs of all the popular brands. This kit is ideal for a range of automotive applications, making it a must-have addition to your garage or workshop.. PORTABLE STORAGE CASE Our Ball Joint Removal Tool Kit comes with a sturdy, organized carrying case that keeps all pieces securely stored and easily accessible, ensuring everything needed is at your fingertips whenever you tackle a project..

This 20 adapter kit covers many TruckVanSUV applications and some car applications.. With the majority of Cars and TruckVanSUV applications having press-in ball joints and universal joints, this kit is designed to service many of those applications.. This kit is a combination of 7249, 7918, and 7996 kits, and includes 20 adapters, C-Frame, Ball Joint Application Guide, and carrying case..

1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 12 and 34 ton 4WD vehicles having the Dana 30 or 44 front axle compatible with Ford, GM, Dodge, IHC and Jeep vehicles.. 4.CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press bushing removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch 27.9cm x 7.6cm x 38.1cm plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. 5.ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..

Removes and replaces ball joints. New forged alloy C frame press has industry leading strength and can alone be used to remove and replace universal joints. Set includes all the receiver tubes and removinginstalling adapters needed to work on press-fit upper and lower ball joints on most Domestic 2 and 4 wheel drive vehicles plus many Import and Euro applications though the 2020s, guidance for over 1,200 applications listed in the manual.. Also included is the 2030-1 live center forcing screw plug. Astros famous forged alloy press measures 6 internally, 8.75 overall. For a larger press and larger applications see Astro 78100 Goliath Press, 9.1 internal, 11.9 overall..

OTC's C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints. Can also service u-joints found on Dana 60 4WD front drive axles with the addition of an OTC No. 6935 adapter. Handy tool also removes heavy duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints. Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money. High-grade materials ensure quality performance over the lifetime of the tool.

Large C-Frame Press The C-Frame ball joint press is a specialized tool used for removing and replacing ball joints.Large ball joint press for max clearance and easier use of tall and stacked adapters.. Premium Quality Our C-Frame ball joint press is made of 40Cr alloy steel, rugged and durable, making it an ideal tool for removing stuck joints.. Wide Application The Ball joint press kit is compatible with most 2WD and 4WD vehicles, such as ATV, UTV, Ford, Dodge, Jeep. Designed specifically for ATV and UTV ball joints, this kit saves you time and money. Use with Compatible Adapters Our universal ball joint press does not include ball joint adapters.Please note that our universal ball joint press does not include ball joint adapters. It is compatible with most other brands of sleeve adapters, making your work easier.. Assured Guarantee We provide 1 Year Guarantee. If you have any questions about the product, please contact us immediately. We will do our best to help you and ensure your satisfaction..

Material Made of carbon steel, surface blackening treatment, solid, not easy to rust.. Handle Double dip plastic handle, composite ergonomics, comfortable grip, can reduce hand fatigue for long time work.. Uses Designed to assist in the removal and replacement of Hotchkiss style snap rings on universal joints with greater visibility. Meanwhile, Also used to break loose, remove as well as replace even the most highly corroded snap rings, plastic push-pin retainers, u-joint bearing cups and plastic clips that secure body panels.. Application Suitable for and not limited to the following devices. Commonly found on class 1-5 trucks, cars, atvutv and equipment. For use with Ford F-150550, for use with Chevrolet 15005500, for use with Ram 15005500, etc... Easy to Use Simply insert the pliers into the hole in the snap ring and squeeze the handle to remove the circlip or tighten the clasp with the pliers and pull it out firmly..

ALL IN ONE FRONT END SERVICE KIT Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.. HARDENED ALLOY CONSTRUCTION Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. PROFESSIONAL PORTABLE ABS CASE The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.. ORION MOTOR TECH PROMISE If any issues from our tools arise please dont hesitate to contact us. We guarantee the quality of our tools and want to ensure youre only getting the best. Because to do perform your best, you deserve the best, thats our Orion Motor Tech Promise..

OTC's Ball Joint, U-Joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.Fit Type Universal. Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases. Contains 3 receiver tubes - 2-34 inch ID x 3 inch OD, 2-14 inch ID x 2-12 inch OD, and 1-34 inch ID x 2 inch OD. Includes 1 each installing cup, receiving cup, and installing adapter. Sturdy blow molded hard case keeps contents protected and secure when not in use.

Includes all the receiving tubes and removinginstalling adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997. Work on press-fit upper and lower ball joints. Set also includes live center forcing screw plug.. Blow molded case keeps the tools organized and easy to transport.

Spicer greaseable universal joint with snap rings. Inside Snap Ring Style ISR. S44 Series. Bearing Cap Diameter 1.125 inches. Length Between Snap Rings 2.556 inches. Spicer genuine OE replacement. Inside snap rings. Inside to inside dimension 2.556 inch. Bearing cup size 1.125 inch. 2-3011, CP3147X, RL3000.

Heavy duty forged steel tool and set is excellent for removalinstallation of press-fit parts such as ball joints, universal joint and truck brake anchor pins. Will remove rusted and corroded parts. Set contains C-frame press, 3 receiver tubes sizes 2-34x3, 2-14x 2-12 1-34x2, installation and removing adapters. Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 12 and 34 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC and Jeep vehicles. Astros famous forged alloy press measures 6 internally, 8.75 overall. For a larger press and larger applications see Astro 78100 Goliath Press, 9.1 internal, 11.9 overall.

quickly and easily removes sealed u-joint caps without damage to driveshafts, yokes or bearing caps.. two sizes to work on many cars, trucks and ag equipment.. heat-treated threads and casting for durability.. 42890 works on cars, light-duty trucks and ag equipment with 1 to 1.25 bearing caps. Fit type Vehicle Specific.

Efficient press-fit removal and installation - Ball Joint Press Kit is Designed for easy removal and installation of press-fit parts such asjoints, universal joints, and truck brake anchor pins.. Versatile 4-in-1 tool - This Ball Joint Press is for 4WDjoint service and repair, providing all the necessary tools in one set.. Convenient carrying case - The U Joint Removal Tool included carrying case provides easy transportation and storage, keeping all the components organized and accessible whenever you need them.. Wide compatibility -The Ball Joint Separator Suitable for most cars and light trucks that have press-fit typejoints, this tool kit allows you to work on various vehicles without the need to remove the control arm.. and - Made of carbon steel, the tool kit is built to withstand heavy-duty use. It can also effectively remove rusted and corroded parts, ensuring long-lasting performance..

Use the driver with an air hammer to remove u-joint caps up to 1-516 diameter. On some vehicles the u-joint is retained with plastic from the factory. The plastic must be removed prior to driving out the u-joint caps. Prevents damage to drive shaft and axle shaft ears, when presses or chisels are used.

Ball and U Joint Removal Tool Includes a C clamp ball joint removal tool and adapters for the upper and lower joints on 12 to 34 Ton 4WD vehicles with the Dana 44 series front axle. Heavy Duty Forcing Bolt This ball joint kit features a heat treated forcing bolt for enhanced strength Hammer on the ball joint anchor pin press tool for extra force. Standard Tool Compatibility Its simple to operate this ball joint puller kit Torque the forcing bolt with an everyday 78 inch or 22 mm ratchet using the ball joint removing tool. Compact Design This ball joint tool set features a compact design for easier ball joint replacements in tight places Requires less vehicle elevation and saves you time. Build the Ultimate Set Create a master ball joint service kit with compatible ball joint adapters from OEMTOOLS Adapter Sets 27023, 25105 and 37310.

Easiest Way To Service And Replace U-joints.

Easy Suspension Strut Handling Orion Motor Tech's suspension strut spreader tool helps you easily widen strut knuckles for smooth and efficient removal or installation of spring struts and spherical hub bearing seats. Precision Strut Spreader Tool Precision-engineered with a 5.0-10.5 mm spreading range and a 16 mm external hexagon to fit suspension struts of various sizes. Comes with an 38 drive socket for even easier operation. Safe Damage-Free Operation The bottom of this strut removal tool remains parallel to your socket wrench during operation, so it doesn't slip off or jump out. Wide Compatibility This strut knuckle spreader is compatible with most vehicles from Volkswagen, Audi, BMW, MINI, and Ford that feature pinch bolt wheel hubs. Solid Construction for Lasting Use Crafted from high-strength 35CrMo and 40Cr steel with corrosion resistant black oxide and electrophoretic coatings, this strut spreader is ready to tackle strut spreading tasks for years to come.

Extended Versatility 14 piece master ball joint adapter set includes installing and receiving tube and cup adapters for use in conjunction with the OEMTOOLS 27023 Ball Joint Press. Wide Applications Work on a wider range of vehicles including pickups, vans, SUVs, and imports Ball joint removal tool kit works on many GM, Ford and Chrysler 2WD and 4WD vehicles. Cut to Fit Designed with the technician in mind The ball joint adapters are cut to fit around obstructions found on many common makes and models, streamlining your repairs. Forged Steel Construction Don't worry about bending, breaking, or warping during your ball joint auto repair remover install adapter set will last you for years to come. Sturdy Case Ball joint service set comes in a sturdy case for easy storage, portability, and organization Easy to find in a crowded garage or carry to the job site.

Remove on a Multitude of Models Remove stubborn seized u joint cups on most passenger vehicles and light duty trucks with the heavy duty joint puller tool.Fit Type Universal Fit. Gentle On Vehicles Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing this u joint tool No need to use damaging methods like hammering or heating. Easy To Use The heavy duty u joint removal tool can be safely used with a 12-inch drive impact wrench or smaller Not with pneumatic impact drills. Durable Build Quality Easily torque the u joint removal tool to remove a seized back or front driveshaft U-joint Yokes easily fit into the 1 to 1.25 inch outside diameter bearing cup. Keep Money in Your Pocket Working on a budget doesnt mean you have to sacrifice quality u joint removal This OEM puller is a cost-effective option to get the job done right.

4-IN-1, 4 wheel drive ball joint removerinstaller kit.. Perfect for 4WD ball joint servicerepair. 1 C frame press 1 C frame screw. Excellent for removal and installation of press-fit parts such as ball joints. Universal joints and truck brake anchor pins.. It will also remove rusted and corroded parts. High impact blow molded storage case included.. Set contains C-frame press, 3 receiver tubes sizes 2-34x3, 2-14x 2-12 1-34x2, installation and removing adapters..

ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 12 and 34 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC and Jeep vehicles.. CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press bushing removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch 27.9cm x 7.6cm x 38.1cm plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..

1.EASY OPERATION Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm.. 2.UNIVERSAL COMPATIBILITY Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 12 and 34 ton 4WD vehicles with the Dana 30 or 44 front axle compatible with Ford, GM, Dodge, IHC, and Jeep vehicles.. 3.PROFESSIONAL-GRADE DURABILITY Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.. 4.ALL-IN-ONE TOOL KIT 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. 5.PROTECTIVE CARRYING CASE Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know..

Provides Ultimate Brute Strength for disassembling even the most seized and stubborn U-Joints in minutes on virtually all Class 7 and 8 trucks and machinery.. Application Commonly found on class 7-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.. U-joints with bearing cups 1.5 to 2.2 outside diameter, Spicer 1610, 1710, 1760, 1810, 1880 Series . Spicer SPL 140, 170, 250 Life Series. Meritor Rockwell 16N, 17N, 18N, 1710 Series, Meritor RPL 20, 25 Permalube Series.. Manufactured from high-grade materials. Each glove is cast from high-grade steel to ensure the most universal fit possible while still maintaining the strength to tackle even the most stubborn U-joints.. We take our heavy duty u-joint pullers seriously. Eliminates dangerous vice-and-socket or hammering methods. Reduces the risk of damage to driveshaft, yokes, joints or bearing caps. Engineered for use with a 1 inch impact tool. Quality, experience, and reliability you can count on.. Our proprietary manufacturing and metal treatment processes ensure threads will hold up under even the most extreme conditions, commonly found in seized u-joints on class 7 and 8 trucks..

Our kit includes 10 cup sizes for most pick-up applications.

APPLICATION The Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with 4WD Adapter can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle. MATERIAL Heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. COMPATIBLITY The Ball Joint tool compatible with most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints. PACKAGE LIST It includes 1x C-frame ball joints press and 1x forcing screw, 2x removalinstallation adapter, 2x installingreceiving cup, 1x install cup adapter, 3x receiving tubes.. PORTABILITY come with a durable storage case, convenient to collect the tools.

Large ball joint press for max clearance and easier use of tall and stacked adapters. Includes both long and short drive screws to maintain a shorter overall working length when desired. Features 3X the throat space and includes a notched foot that allows for pressing out ball joints without removal of top mount grease fittings. Astro's new forged alloy steel. 9.1 throat, 11.9 length.

Heavy-duty tool removes and installs ball joints, U-joints and truck brake anchor pins. Live center forcing screw plug. Heavy-duty steel and cast metal construction for years of service. Molded storage case included.

SERVICE YOUR VEHICLE Use the Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. BUILT TO LASTBall Joint Press Removal Tool Set is constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. APPLICATIONFit most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 12 and 34 ton 4WD vehicles having the Dana 30 or 44 front axle Compatible for Ford, for GM, for Dodge, for IHC vehicles.. EASY TO STOREBall joint press removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch 27.9cm x 7.6cm x 38.1cm plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization.. PACKAGE CONTENTS3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup. If any problem, we will slove to you, refund or replace..

DURABLE STRUCTURE The heavy duty ball joint press kit is made of heavy forged steel with black oxide finish adapters. The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant. The bushing press kit can withstand long-term and massive use.. FUNCTION The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency.. EASY TO OPERATE The ball joint removal tool is ideal for removinginstalling vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed.. WIDE COMPATIBILITY The ball joint press U joint removal tool kit is suitable for most two wheel drive 2WD and four wheel drive 4WD vehicles, as well as lightweight pickup trucks with press fit ball joints. The 4WD ball joint service kit allows service for 1967 to present 12 and 34 ton four-wheel drive vehicles with Dana 30 or 44 front axles compatible with Ford, General Motors, Dodge, IHC, and Jeep vehicles.. PACKAGE INCLUDED 1 x Ball Joint Press C-Clamp, 1 x Jack Screw Forcing C-Screw, 1 x Installation Adapter, 1 x Removal Adapter, 1 x Installing Cup, 1 x Receiving Cup, 1 x Installation Cup Adapter, 3 x Receiving Tubes.. SPECIFICATIONS Installing Cup3.6L x 1-34I.D. x 2O.D. Receiving Cup2-12L x 2I.D. x 2.13O.D. Install Cup Adapter0.8L x 1.9I.D. x 2-14O.D. Removal Adapter1.06L x 12I.D. x 3O.D. Installation Adapter1.1L x 0.98I.D. x 3.03O.D. 3 Receiving Tube1-34L x 1-34I.D. x 2O.D.1-34L x 2-14I.D. x 2-12O.D.2.13L x 2.7I.D. x 3O.D... KINDLY NOTE All products of our ball joint press kit have undergone rust prevention treatment, so there may be some anti-rust oil residue on the surface. If the box is damaged, it may be due to mishandling during the shipping process..

Solid Carbon Steel Construction with Anti-Rust Finish, Durable and Versatile. Designed to Remove and Replace Press-Fit Upper and Lower Ball Joints. All-in-One Set Includes All Receiver Tubes, RemovingInstalling Adapters etc.. Forged C-Frame Press Can be Used to Remove and Replace Universal Joints. Blow Molded Case Keeps the Tools Securely Organized and Easy to Transport.

648617 Ball Joint U-Joint Service Tool Set of 23. Kit Services Most domestic and import rear wheel drive vehicles. Removes and installs pressed-in type ball joints found on most vehicles. Remove and install special threaded upper Ball Joints replacement for many Chrysler vehicles. Changes ball joint without removing control arm from the vehicle. Tools can also be used to remove and install U Joints. This set includes - PlugOD 78 - Receiving Tube OD 2-14 ID 2, 2- Installing Tube OD 2 ID 1-34, 3 - Receiving Tube OD 2-12 ID 2-14, 1-12 - Receiving Cup OD 2 -14 ID 1-78, 716 - Receiving Tube OD 2 12, 2-14, 34 - Receiving Tube OD 2-716 ID 2-316, 3-316 - Removerinstaller OD 1-716 ID 34, 1 - Installing Tube OD 2 ID 1-34, 2-516 - Receiving Cup OD 2-18 ID 1-34, 12 - Receiving Tube OD 2-12 ID 2-14, 2-34 - Receiving Tube OD 3 ID 2-34, 2-14 - Receiving Tube OD 2-34, ID 2-716, 2-14- Receiving Tube OD 2-78 ID 2-58, 2-78 - Screw. C-frame - Receiving Tube 1-34 X 2 - Receiving Tube 2-14 X 2-12 - Receiving Tube 2-34 X 3 - Removal Adapter - Install Adapter 34dr. X 1-5964 - Install Adapter 34dr. X 2-964.

PREMIUM MATERIALS -- Rugged ball joint press kits are constructed of heavy-duty forged steel with a rust and corrosion-resistant finish for long life. Ideal for removing stubborn joints.. Versatile U-joint Tool -- ball joint removal tool designed to remove and install press-fit parts, including upper and lower ball joints, u-joints, universal joints, brake anchor pins and more without removing the control arm from the vehicle. Comes with multi-sized adapters to keep your suspension running smoothly.. Convenient Storage -- A rugged carrying case is included to keep all tool components neatly organized and stored. As a complete professional set, portable ball joint tool deliver the performance demanded by automotive shops and DIY mechanics.. WIDE APPLICATION -- Fits most 2-wheel drive 2WD and 4-wheel drive 4WD cars, SUVs, light trucks, pickups, vans, and sport utility vehicles such as GM, Chevrolet, Chrysler, Ford, and Dodge. Includes vehicles with Dana 28, 30, 35, 44 or 60 front axles.. Complete setAll in one Set --- 21pcs Master Ball joint service kit includes 1 x C-Frame, 1 x jack screw, 9 x Adapters, 1 x Center Rod, 1 x Install Adapter, 1 x Install Cup, 1 x Install Cup Adapter, 1 x Receiving Cup, 3 x Receiving Tube, 1 x Removal Adapter, 1 x Sleeve. Meets most of your needs..

Premium Material -- Heavy duty ball joint tool constructed from forged steel and heat treated for strength and durability. Special spraying finish improves the corrosion and rust resistance and effectively extended service life.. Wide Application -- Ball joint press kit with a 9-inch inside width provides greater reach and can be used with several larger adapters. Ideal for any ball joint removal job on vehicles, trucks and SUVs such as 4WD and Chevy trucks 2500-3500.. Efficient Operation -- Large c-frame press has 3 times the throat space of a normal press, allowing ball joints to be pressed out with minimal force without removing the top-mounted grease fittings.. Professional Craftsmanship -- Strength and durable construction design is perfect for removing larger press-fit joints, making it ideal for trucks like the Ford F350-550 and Dodge Ram 2500-3500, Toyota Tundra and Tacoma trucks.. Fit for Your Needs -- Ball joint removal tool comes with 6.5 and 9 inch drive screws with pressure fastener head adapters to keep overall working length short when needed..

Application Fit for 1 - 1.252.5 - 3.2 cm bearing cups. This universal joint puller is universal and can easily remove stuck universal joint cups on most Class 1-3 cars, trucks and farm machinery. Material Made of sturdy tool steel, our products can remain durable even under the most extreme conditions. The U-joint removal tool with black anodized finish offers excellent durability and corrosion resistance. Function This u joint puller with practical leg design can handle the most challenging jobs without heating and hammering, saving time and effort. It fits perfectly on the cross shaft and prevents damage to the drive shaft, yoke, joints and bearing cups. Features This 10105 heavy duty universal joint puller eliminates dangerous vise, socket or hammering methods. Provides extreme brute force to remove even the most stuck universal joints. Customer Supports We offer lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Please feel free to contact us if you have any questions.

10102 U-Joint Puller This heavy-duty u joint puller works with up to a one-inch impact wrench and fits bearing cups from 1.5 to 2.2. It also serves as an effective u joint removal tool, providing brute strength to disassemble even the most seized u-joints on virtually all Class 7 and 8 trucks and machinery in minutes, without damaging the driveshaft, yokes, joints, or bearing cups. 5192 Bearing Cup Installer Quickly and easily installs bearing cups on bolt-retained universal joints while automatically aligning them during installation. This u joint tool fits series 1610 to 1880 and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups. Superior Quality Manufactured from premium grade heavy duty carbon steel with a black anodized finish for durability, corrosion resistance, and anti-rust protection. As a reliable universal joint removal tool, it offers high precision and hardness to provide a much longer service life. Great Compatibility Fits Spicer drivelines 1610 1710 1760 1810 1880, Meritor Rockwell 16N 17N 18N 1710, Spicer SPL 140 170 250 Life Series, and Meritor RPL 20 25 Permalube Series. This versatile u joint press and removal tool works with virtually all Class 7 and 8 trucks and machinery. Warranty maXpeedingrods warrants its products against manufacturing defects in materials and workmanship for 1 year from the date of purchase, and provides unlimited technical support and customer service.

Extra Large C Frame Press Essential ball joint tool kit staple for removing press fit parts from pick up trucks Specialized C clamp makes truck ball joint removal simple. Truck Ball Joint Separator Ball joint puller tool made for pick up trucks For use with Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F550. Rugged Frame Strength Build a stronger master ball joint service kit with this heavy duty forged steel C frame This extra large ball joint press even removes seized joints. Extended Applications This heavy duty ball and U joint removal tool features an extended C frame Compatible with larger ball joint adapters that standard C frame presses won't fit. Use with Compatible Adaptors Universal ball joint press does not include ball joint adaptors Use with OEMTOOLS 37310, 25104, 27023, or 27089 adapters.

MULTIFUNCTION C-FRAME PRESS Orion Motor Tech's ball joint press kit lets you remove and install ball joints on most cars and light trucks with press fit type ball joints this C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints it supports removing heavy duty truck brake anchor pins and press in wheel studs. LARGE BALL JOINT PRESS This extended C frame press with a 9 inner width allows use with multiple larger adapters that standard c-frame press won't fit our ball joint tool set is compatible with the large ball joints on pick-up trucks, including Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F551. POWERFUL OPERATION Our ball joint tool set is compatible with your large adapters and is a near-universal ball joint separator that holds up and removes seized ball joints our ball joint separator tool comes with 6.5 and 9 inch pressure fasteners with pressure fastener head adapters. EASY TO USE This ball joint press tool separates ball joints without damaging your hands or any of your car's other components our pneumatic ball joint press lets you press out ball joints with minimal effort without removing the top mount grease fittings. DURABLE CONSTRUCTION Our ball joint removal tool is made from premium forged steel that has been cold-forged and heat treated for superior strength and longevity while the classic matte black coating ensures long lasting corrosion resistance.

Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw. Works with most OTC ball joint kits, cups and adapters. Locking cups and adapters set up faster on the vehicle and leave one hand free. Professional Kit option CA6630 includes 25 cups and adapters to work on more than 600 vehicle models, 76 more vehicle models than the competition. No O-Rings or removable fasteners to lose, damage or replace. For RI of ball joints, U-joints, wheel studs and more.

Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw. Works with most OTC ball joint kits, cups and adapters. Locking cups and adapters set up faster on the vehicle and leave one hand free. Starter kit option CA7149 includes 7 cups and adapters to work on more than 230 vehicles models, 38 more than the competition. No O-Rings or removable fasteners to lose, damage or replace. For RI of ball joints, U-joints, wheel studs and more.

Complete 23-Piece Ball and U Joint Service Set Includes a full selection of receiving tubes, adapters, sockets, and a heavy-duty C-frame for removing and installing ball joints and U-joints with precision.. Universal Compatibility Designed to service press-fit ball joints and U-joints on a wide range of domestic and import vehicles, including cars, SUVs, and light trucks.. Heavy-Duty, Shop-Grade Construction Built from premium materials to withstand high torque and repeated use in professional and DIY settings.. Time-Saving Design Eliminates the need to remove control arms during service, reducing effort and repair time while improving efficiency in ball joint and U-joint replacement tasks.. Organized Storage Case with Step-by-Step Instructions Durable molded case keeps tools protected and accessible, and includes laminated instructions with usage photos for clear, grease-resistant guidance..

SAFE Designed for safe, efficient removal, and installation of Press Type Ball Joints. VERSATILE Industry-leading adapter set allows ball joint and driveshaft service on multiple makes and models including 2-wheel drive, 4-wheel drive, SUVs, trucks, and many more. LONG USE Top quality designed set is strong and dependable for a lifetime of use. COMES IN Heavy duty blow molded case to keep set protected and organized. EASY TO READ Includes usage instructions with photos. Tool set for removing and replacing press-fit ball joints and U-joints. For use on domestic and import rear wheel drive cars. For use on Ford, GM and Dodge 2 and 4 wheel drive pickups, vans and SUVs. Storage case includes usage photos. Kit 72 includes 10-Piece for removal and installation of press-fit ball joints and U-joints.

COMPREHENSIVE SERVICE KIT The Driveline Master Kit part number 20478 comes equipped with six essential tools for comprehensive servicing of driveline and suspension components. Perfect for light to medium-duty vehicles, this kit is a must-have for professionals working on class 1-5 trucks, cars, and equipment.. POWERFUL U-JOINT SERVICE TOOLS Included in the kit are the Medium Duty U-Joint Puller part number 10104 and the Automotive U-Joint Puller part number 10105, both engineered to provide exceptional strength for disassembling seized u-joints swiftly. These tools are indispensable for maintenance on medium and light-duty trucks, cars, school buses, farm, and light industrial vehicles. Commonly found on class 1-5 trucks, cars, and equipment.. EFFICIENT YOKE REMOVAL BEARING CAP INSTALLATION The Automotive Yoke Puller part number 10850 is a key component of this kit, designed to remove automotive yokes efficiently from driveshafts, transmissions, and differentials without causing any damage. This tool streamlines the yoke removal process, ensuring a smoother maintenance experience. The Automotive Bearing Cap Installer part number 10202 facilitates the installation of two bearing caps simultaneously on a wide range of u-joints. This addition makes bearing cap installation a hassle-free process.. SPECIALIZED SNAP RING PLIERS The kit is rounded off with the inclusion of the Straight U-Joint Snap Ring Pliers part number 70300 and the 75 Snap Ring Clip Pliers part number 70301, featuring unique jaws designed for easy removal and replacement of Hotchkiss-style snap rings. The 75 head pliers are specially crafted to reach difficult areas, making this kit comprehensive for driveline maintenance.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

COMPREHENSIVE U-JOINT SERVICE The Automotive U-Joint Service Kit is expertly crafted for servicing a wide range of vehicles, including cars, light to medium-duty trucks, and farm machinery, ideal for bearing caps measuring 1 inch to 1.25 inches. Including three specialized tools, this kit provides a safer and more efficient alternative to traditional vice, socket, and hammering methods. Designed to service U-joints without causing damage to driveshafts, yokes, joints, or bearing caps, it ensures maintenance tasks are performed with precision and care.. WIDE COMPATIBILITY Commonly found on class 1-2 trucks, cars, and equipment. For use with Ford F-150350, for use with Chevrolet 15003500, for use with Ram 15003500, etc... STRONG EFFICIENT The kit features the Automotive Universal Joint Puller part number 10105, known for its brute strength in disassembling seized u-joints quickly. The Automotive Bearing Cap Installer part number 10202 streamlines the installation of two bearing caps simultaneously on a variety of u-joints, enhancing service efficiency.. SPECIALIZED SNAP RING PLIERS The Straight U-Joint Snap Ring Pliers part number 70300 included in the kit boast a unique jaw design tailored for the removal and replacement of Hotchkiss-style snap rings on universal joints. This specialized tool is indispensable for technicians dealing with intricate snap ring configurations.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

COMPREHENSIVE U-JOINT SERVICE The Tiger Tool 20150 Commercial U-Joint Service Kit is your all-in-one solution for servicing universal joints on heavy duty trucks. Equipped with essential tools, this kit facilitates both the dismantling and assembly of u-joints across a wide range of vehicles, making it an indispensable set for commercial truck maintenance.. WIDE COMPATIBILITY Commonly found on class 6-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for sue with Freightliner, for use with Mack, for use with Volvo, etc... INCLUDED U-JOINT REMOVAL TOOL This kit features the Tiger Tool Commercial U-Joint Removal Tool part number 10102, renowned for its brute strength in disassembling even the most seized u-joints swiftly. Compatible with class 6 and 8 trucks and machinery, the 10102 tool streamlines u-joint service, saving time, effort, and money.. BEARING CAP INSTALLERS FOR PRECISION Also included are two bearing cap installers, model part numbers 10217 and 10201, designed for precise installation of bearing caps. The 10217 is tailored for DanaSpicer Life Series quick-disconnect u-joints, while the 10201 caters to bolt-retained bearing caps, ensuring a perfect fit and efficient service.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

High Compatibility Tool Kit Are you ready to get your car out of the garage Our 21-piece ball joint tool kit is designed to fit most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles, including vehicles with Dana 28, 30, 35, 44 or 60 front axles. It is compatible with popular car brands such as Ford, General Motors, Dodge, IHC, and Jeep.. Make it Harder Our ball joint install kit is built to handle tough tasks without bending or breaking. The C-clamp hardness is HRC32-38, and the jack screw hardness is HRC28-36, achieved through multiprocess heat treatment. This makes our kit reliable and capable of handling the most challenging and high-stress tasks.. Robust Powerful Structure Our heavy-duty ballpoint press kit is made from high-quality carbon steel, providing the strength and durability needed to handle any task. It is coated in black, offering superior protection against water, corrosion, and rust. This ensures that the kit remains efficient and durable even in the harshest conditions.. Protection for All Your Tools The ball joint press makes it easy to remove and install ball joints, U-joints, and brake anchor pins without dismantling the control arm. Our portable carrying case kit includes 10 high-quality pieces, and it is designed for easy transportation and storage.. Whats in the Package Our 21 pcs ball joint kit includes 9 adapters, 1 plug, 1 ball joint press, 1 installation adapter, 1 installation cup, 1 installation cup adapter, 1 receiving cup, 3 receiving tubes, 1 removal adapter, 1 screw and a socket. With these tools at your disposal, you'll have a professional car repair assistant that can help you get the job done right..

6-Ton Strong Loading Capacity Whether you're a seasoned professional or a DIY enthusiast, our hydraulic shop press is the perfect tool for removing and installing automobile bushings, bearings, ball joints, U-joints, pulleys, gears, and more. This press can also be used for metalworking tasks like bending, straightening, and stamping. Get the job done quickly and easily.. Relief Valve Mechanism The hydraulic jack with a built-in relief valve is your perfect partner for heavy lifting tasks. With a clever design that ensures your security, this jack won't let you down when it counts. The relief valve kicks in automatically when the pressure exceeds 6T, avoiding any overpressure-related damage to the workbench.. Heavy and Stable The H-shaped frame structure provides a sturdy base that won't wobble or shake during use. Built to last, our hydraulic press boasts a robust 0.1-inch carbon steel body that can handle even the toughest jobs. And with a sleek powder-coated finish, the surface of the shop press is corrosion-resistant, and a breeze to clean.. Adjust to Any Task With a range of 2.2 to 9.8, you can easily find the perfect working height for a comfortable and efficient experience. And adjusting the height is a breeze thanks to the convenient pin system. Plus, our hydraulic bushing press comes with two movable stamping plates that are perfect for securing small parts during use.. More Helpful Details Your security and satisfaction are our top priorities Our hydraulic press machine is certified by DOC international, providing peace of mind during use. Plus, we've reinforced our carton packaging to minimize any loss or damage to the components during shipping..

VERSATILE TOOL SET OMT's ball joint tool lets you quickly and easily remove and install stubborn press fit parts, including ball joints, U joints, and brake anchor pins. UNIVERSAL COMPATIBILITY This ball joint removal tool kit includes adapters of common sizes to work with most 0.5 0.75 ton 4WD vehicles and is compatible with GM, Ford Jeep, Dodge, and IHC since 1967. SAFE SECURE The 9 inch long C frame press with a 6 inch opening and extra long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components. DURABLE CONSTRUCTION Our ball joint removal tool is made from premium 45 steel that has been forged and coated to provide optimal corrosion resistance and durability for powerful leverage. EASY TO USE This 10 piece U joint removal tool removes and installs press fit upper and lower joints without removing the control arms a custom molded case comes included for easy transport and storage between uses.

VERSATILE TOOL Orion Motor Techs universal U joint puller lets you remove seized U joint caps on most class 7 and 8 trucks it is compatible with various Kenworth, Peterbilt, Freightliner, Mack, Volvo, and other models. WIDE COMPATIBILITY This separator tool works with U joint bearing caps from 1.5 to 2.2 it is compatible with Spicer drivelines 1610, 1710, 1760, 1810, 1880, Meritor Rockwell 16N, 17N, 18N, 1710, the Spicer SPL 140, 170, 250 Life Series, and Meritor RPL 20, 25 Permalube series. QUICK EASY OPERATION Our U joint puller helps you to disassemble drivelines without the need for dangerous hammering or damaging heat, leaving your driveshaft, yokes, joints, and bearing caps untouched. BUILT TO LAST Made of premium steel, our U joint extractor provides strong and dependable service for the long haul heat treated and blackened, each part offers superior durability and corrosion resistance. 1 YEAR WARRANTY Order Orion Motor Tech's U joint puller with your peace of mind assured thanks to its strong 1 year warranty and our usual friendly 247 customer service.