Compatibility- Rear Step Bumper for 2007 2008 2009 2010 2011 2012 2013 Tundra Models. Not compatible with factory back-up sensors. Full Protection- Rugged styling and full protection bumper. Retains factory receiver hitch. Equipped with 218w LED floodlights. Practical Design- Features high strength D-ring mountsD-Rings Not Included. Integrated license plate mount Equipped with a license plate light. Heavy-Duty Construction- Made of high tensile 11-gauge18 inch steel for the bumper main body. Durable Coating- Textured black powder coat finish Premium E-coating process inside for long-lasting durability and corrosion resistance. Easy Installation- 3-Piece modular design bumper. No cutting, drilling or modification required. Direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. Package Content- Rear bumper 218W high power LED floodlights Mounting hardware accessories Installation instruction. Bumper weight about 58 lbs.

Compatibility- Hooke Road rear bumper compatible with 2014-2021 Toyota Tundra Regular Cab, Double Cab, CrewMax pickup trucks, designed to accommodate the OEM backup sensors, hitch, and trailer plug, so that enhanced style comes with full preservation of towing utility and driving safety not compatible with blind spot monitoring. Recovery-Ready Strength- Integrated high-strength D-ring mounts offer dependable rear recovery points for off-road extraction, towing assistance, or emergency situations, giving Tundra owners confidence when exploring trails or hauling heavy loads D-rings not included. Rear Visibility Street Compliance- Includes two 25W LED spotlights to improve rear visibility when reversing at night, on trails, or at campsites, paired with a license plate light and dedicated mounting plane to ensure street-legal operation and clear visibility in low-light conditions. Heavy-Duty Steel Strength- The bumper main body is crafted from heavy-duty, high-tensile 11-gauge 18 in steel, while the mounting structure uses 9-gauge 532 in steel for stable, secure installation. Bumper weighs about 74 lbs. Rust-resistant Finishes- The textured black powder coat finish enhances its appearance while providing robustness. Premium E-coating internally safeguards against the elements, making it a reliable choice for daily driving and off-road adventures. Bolt-On Installation- Direct bolt-on design installs to factory mounting points with no drilling or vehicle modification required, allowing a clean, garage-friendly installation using the included hardware and step-by-step installation guide. Warranty Support- Backed by a 2-year limited manufacturer warranty from the date of purchase, plus lifetime customer support from Hooke Road.

Compatible With 2007-2013 Toyota Tundra. NOTICE Fits BOTH models WO SENSOR Hole WO Sport Appearance Package Resin Bumper. Package Includes 1 X Rear Bumper AssemblyFace Bar and Pads, License Plate Lights. DURABLE MATERIAL Black Steel Construction High Grade ABS Plastic, Durable In Using For a Long Time. Easy Fit All mounting hardware is included in the bumper kit bolts directly on, and no modification or drilling is required.

Front Bumper Cover Support Fit For Toyota Tundra 2022 2023 2024 2025, match to the original front bumper support bracket. This Front Bumper Support Bracket OEM-Grade ABS Replacement with Parking Sensor Mount is engineered to embrace your trucks front end, delivering a snug fit that maintains the stock parking sensor alignment and avoids any drifting or misplacement for Parking Sensor Mount accuracy. Designed fit for 2022-2025 Toyota Tundra models, this bumper support features precision-molded contours that mirror the factory unit, providing consistent panel gaps and head-turning aesthetics, while reinforcing the front bumper cover support to resist everyday knocks. Easy, bolt-on Front Bumper Cover Support installation means no cutting or drillingsimply remove the old front bumper support bracket and swap in this OEM-grade ABS replacement that holds your parking sensors securely in place for seamless Parking Sensor Mount operation. Maintain your Tundras showroom appearance and factory safety functionality with this Front Bumper Cover Support Bracket that preserves original sensor performance, restores proper front bumper alignment, and blends flawlessly with the stock front bumper cover for lasting durability.

Application- Rear Bumper designed for Toyota Tundra models 2000 2001 2002 2003 2004 2005 2006.. Full Protection- Features 1 piece design with a full-width Tundra rear bumper for a rugged off-road appearance and superior protection.. Offroad Use- The bumper is reinforced with high-strength D-Ring mounts, supporting up to 4.75 tons Includes 2 D-rings. Practical Design- Comes with 218w LED square lights and 2 license plate lights, provides adequate lighting at night.. Durable Coating- Constructed from heavy-duty, high tensile steel. Finished with a textured black powder coat and treated with a premium E-coating process internally to ensure long-lasting durability and resistance to corrosion.. Easy Installation- Easy to assemble, it serves as an upgrade replacement for the original stock bumper, utilizing the factory mounting points. With pre-drill sensor holes but no sensors.

Perfect Fitment Designed specifically for 2000-2006 Toyota Tundra models, including those with a towing package. No modifications or drilling required.. Towing Package Compatibility Ideal for trucks equipped with tow straps. Simply remove the metal piece behind the bumper for seamless installation.. Comprehensive Package Includes 1 rear bumper assembly face bar and pads, and all necessary mounting hardware.. OEM Equivalent Quality Matches Partslink Number TO1103107 and TO1102229, OEM 520150C010, 520160C010, ensuring a direct OEM fit for your vehicle.. Durable Construction This tundra rear bumper is made of high-quality ABS plastic and chrome-plated steel, offering exceptional durability and corrosion resistance..

VEHICLE COMPATIBILITYRear Bumper Assembly Compatible With 00-06 Toyota Tundra without Park Assist Sensor Holes. Replacement Number TO1103107. PREMIUM HOUSING MATERIALSThis Rear Bumper is sturdy constructed ensuring excellent weather and impact resistance. It ensures a pleasant and comfortable driving experience. DURABILITYIt ensures a pleasant and comfortable driving experience. Stable characteristics and high reliability. EASY INSTALLATIONInstallation instruction is not included. Professional installation would be highly advised. ONE PIECE DESIGNThe rear bumper features ONE-PIECE design that ensures effortless installation. No assembly is required, offering enhanced convenience while prioritizing safety for your vehicle..

Application- Hooke Road full width front bumper for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 Regular Cab Double Cab CrewMax all models. Compatible with factory parking sensors. Tundra Front Bumper- 3-piece modular design. Includes 418w LED spotlights. Accommodate LED straight light bars ranging from 16 to 28 not included. Equipped with a license plate mounting bracket. Offroad Use- Built-in winch plate up to 12,000 lbs. Includes two openings to allow easy access to the winch. Features high strength D-ring mounts with 4.75-ton capacity. D-rings not included. Heavy-Duty Construction- Heavy-duty, high tensile 11-gauge 18 in steel for the bumper main body, 10-gauge 964 in steel for the mounting structure, 8-gauge 1164 in steel for the winch plate. Front bumper weight is about 100 lbs. Durable Coating- Textured black powder coat finish Premium E-coating process inside for long-lasting durability and corrosion resistance. Bolt-On Install- Easy installation wclear and detailed instruction. Direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. No cutting, drilling or modification required. Warranty- Manufacturer warranty for 2-Year from date of purchase. Lifetime customer support from Hooke Road.

Perfect Fitment This full-width tundra front bumper is compatible with Toyota Tundra models from 2007 to 2013. Please verify the vehicles model and year before placing an order.. Premium Material Crafted from high-quality carbon steel and treated with an E-coating process and textured black powder coat finish, this front bumper is highly resistant to wear and corrosion, ensuring long-lasting durability.. Tundra Front Bumper Newly designed bumper in elegant style, providing ample protection for the front of your truck.. Integrated Lighting Equipped with a built-in 144W LED long light bar and two 18W LED lights, this front bumper enhances the off-road style of your vehicle and provides illumination for nighttime adventures. No wiring harness to connect the lights. Effortless Installation 3-piece design, this tundra front bumper includes all necessary mounting hardware for direct bolt installation, requiring no modification or drilling. With sensor holes but no sensors.

Fit for Following Vehicles -- The Black Rear bumper Compatible for 2000-2006 Toyota Tundra notes Fit For without Rear Park Assist Sensor Holes Models Only. Product Detail -- The KUIPERAUTO rear bumper built-in 2pcs high power 20W flood beam fog lights, good for road lighting, much brighter.Package List 1x Rear Bumper, 2x 20W LED Lights, Includes mounting hardware Materials. direct replacement, no modifications, drilling or cutting are required. Advantages -- The bumper made of superior steel and ABS plastic, which is designed to fit your vehicle perfectly, provides effective protection in the event of a sudden collision, anti-rust and anti-corrosion process makes the bumper more durability and have a long-lasting. Function -- The KUIPERAUTO bumper to protect your body from the harsh environment and sudden collision, making your travel more reassuring, and which have a very stylish and practical appearance. Notes -- Please double check the compatibility chart and model description before your purchasing.

SUITABLE MODELSThe rear bumper cover compatible with 2010,2013 Tundra Platinum 2007-2011,2013 Tundra SR5 2007-2013 Tundra Base, Limited without Park Assist Sensor Holes. Fits models WO Sport Appearance Package Resin Bumper Replacement Number TO1103117. PREMIUM DESIGNThis Rear Bumper is sturdy constructed ensuring excellent weather and impact resistance.. DRIVING SAFERIt ensures a pleasant and comfortable driving experience. Stable characteristics and high reliability. INSTALLATION Ease of use and installation in mind, this bumper installs quickly and easily without requiring any modification to your vehicle.. WARRANTYRear Bumper assembly will come with 30 days HASSLE-FREE RETURN 365 DAYS UNLIMITED REPLACEMENT PROMISE.. NoteWith a seamless one-piece construction, this rear bumper is easy to install and eliminates the hassle of assembly. Designed for durability, it guarantees reliable safety..

Fitment This valance panel is compatible with 2007,2008,2009 Toyota Tundra Base, Limited, SR5, providing a seamless integration with the vehicle's front end. Feature Made from plastic PP-polypropylene. This material is known for its durability, against to impact, and ability to withstand various weather conditions. Replacement Matches the specifications of replacement parts TO1095199 and 539110C030. You can refer to the number to ensure further that this is fit your model. Function The flow deflectors help direct air flow around the vehicle. This not only improves aerodynamics but also helps to cool the engine and radiator by optimizing the air intake. Package 1x front bumper center cover without install parts and instruction, but you just need to replace the old one, you can do it by yourself.

Compatible WithSteel front and rear bumper compatible with 2000 2001 2002 2003 2004 2005 2006 Toyota Tundra. Heavy Duty Steel 532 inch thick alloy steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper, black powder coating, corrosion resistance and durability.. Adventure LightingThe front bumper is equipped with 1x144W aluminum lamp 4x24W aluminum lamps. The rear bumper is equipped with 2x24W aluminum lamps. It provides bright lighting for you on dark roads and wilderness off-road, giving you ample vision to ensure safety.. Multifunctional useThe front bumper has two 4.75-ton high-strength D-ring mounts. And equipped with 2x4.75T D-ring. The maximum pulling force can support 9500 pounds. The front bumper includes a built-in winch plate that can support a 12,000-pound winch.. Front and rear bumper compositionThe front bumper consists of a main body and two side wings it is not a single-piece bumper. The rear bumper also consists of a main body and two side wings it is not a single-piece bumper.. InstallationlEasy to install without drilling or cutting. Follow the instructions to install. The bumpers are shipped separatelyThe front bumper, light bar, and rear bumper are individually packaged and shipped in separate batches. This prevents products from being damaged during transportation, providing a better logistics experience.. Note A 22.5mm sensor mounting hole is reserved. Not compatible with original sensors. A sensor hole suitable for 22.5mm can be purchased to mount the sensor..

Compatibility Front Bumper Cover is compatible with 2014-2021 Toyota Tundra. Replacement for TO1000404, 539110C050. Please confirm your vehicle model before purchasing. Feature Front Bumper Cover is made of durable PP plastic and the color is black. The material of this front bumper cover is hard-wearing, not easily damaged and can withstand a certain degree of impact. Enhance Function Designed to absorb and disperse crash energy, reduce the impact force on the passenger compartment and lowering the risk of damage to passengers and drivers. Package Content 1 x Front Bumper Cover, without installation hardware and instructions. Installation Directly replace the broken or old bumper cover, it is easy to install. Professional installation is also recommended.

SUITABLE MODELSThe rear bumper compatible with 2000-2006 Toyota Tundra without Park Assist Sensor Holes.Replacement Number TO1103107. PREMIUM DESIGNThis Rear Bumper is sturdy constructed ensuring excellent weather and impact resistance.. DRIVING SAFERIt ensures a pleasant and comfortable driving experience. Stable characteristics and high reliability. ONE-PIECE DESIGNWith a seamless one-piece construction, this rear bumper is easy to install and eliminates the hassle of assembly. Designed for durability, it guarantees reliable safety.. Service If you don't like it, just contact the customer service. All we wanna do is to make you love TUSDAR products.

VEHICLE COMPATIBILITYRear Bumper Assembly Compatible With 2010,2013 Tundra Platinum 2007-2011,2013 Tundra SR5 2007-2013 Tundra Base, Limited. Fits models WO Park Assist Sensor Holes WO Sport Appearance Package Resin Bumper OEM TO1103115. DURABILITYIt ensures a pleasant and comfortable driving experience. Stable characteristics and high reliability. EASY INSTALLATIONInstallation instruction is not included. Professional installation would be highly advised. ONE PIECE DESIGNThe rear bumper features ONE-PIECE design that ensures effortless installation. No assembly is required, offering enhanced convenience while prioritizing safety for your vehicle.. PREMIUM HOUSING MATERIALSThis Rear Bumper is sturdy constructed ensuring excellent weather and impact resistance. It ensures a pleasant and comfortable driving experience.

VEHICLE COMPATIBILITYBack Bumper Assembly Compatible with 2010,2013 Tundra Platinum 2007-2011,2013 Tundra SR5 2007-2013 Tundra Base, Limited. Fits models WO Park Assist Sensor Holes WO Sport Appearance Package Resin Bumper OEM part number TO1103117. PREMIUM HOUSING MATERIALSThis Rear Bumper is sturdy constructed ensuring excellent weather and impact resistance. It ensures a pleasant and comfortable driving experience. DURABILITYIt ensures a pleasant and comfortable driving experience. Stable characteristics and high reliability. EASY INSTALLATIONInstallation instruction is not included. Professional installation would be highly advised. ONE PIECE DESIGNThe rear bumper features ONE-PIECE design that ensures effortless installation. No assembly is required, offering enhanced convenience while prioritizing safety for your vehicle..

Steel front bumper fit 22 23 24 tundra unlimited.. Built-in aluminum light design, beautiful appearance. The front bumper is equipped with 1 144W aluminum light and 4 24W aluminum lights. Aluminum lights can not only produce visual beauty, but also provide you with illumination and safety on dark roads.. Manufactured from 532 thick low carbon hard steel and 2 x 0.120 precision tolerance steel tube, advanced three-stage black powder coating, corrosion and durability.. Advanced texture welding design. Two high-strength D-ring shackles are welded to the bumper. Comes with two 4.75T D-rings. Includes built-in winch and sensor mounting holes, and the winch plate can support a 12,000-pound winch. The diameter of the reserved sensor mounting hole is 22.5mm. Sensor mounts can be purchased with a diameter of 22.5mm.. The bumper is easy to install, no drilling required. No cutting required. Just insert and tighten with screws. But the truck needs to do some simple cutting. Manufacturer defects can be replaced with new products within 1 year from the date of purchase. TIOYAR provides lifetime customer support..

SUITABLE MODELSThe rear bumper cover compatible with 2010,2013 Tundra Platinum 2007-2011,2013 Tundra SR5 2007-2013 Tundra Base, Limited without Park Assist Sensor Holes. Fits models WO Sport Appearance Package Resin Bumper Replacement Number TO1103115. PREMIUM DESIGNThis Rear Bumper is sturdy constructed ensuring excellent weather and impact resistance.. DRIVING SAFERIt ensures a pleasant and comfortable driving experience. Stable characteristics and high reliability. INSTALLATION Ease of use and installation in mind, this bumper installs quickly and easily without requiring any modification to your vehicle.. WARRANTYRear Bumper assembly will come with 30 days HASSLE-FREE RETURN 365 DAYS UNLIMITED REPLACEMENT PROMISE.. NoteWith a seamless one-piece construction, this rear bumper is easy to install and eliminates the hassle of assembly. Designed for durability, it guarantees reliable safety..

Fitment The Rear Step Bumper Assembly Compatible with 2010,2013 Tundra Platinum 2007-2011,2013 Tundra SR5 2007-2013 Tundra Base, Limited. Fits models WO Park Assist Sensor Holes WO Sport Appearance Package Resin Bumper OEM TO1103117. Package 1 Rear Bumper and Installation Accessories Installed Direct OEM Replacement completely identical to factory unit. Engineered with a single-mold design, this rear bumper simplifies installation by removing the need for assembly. Its strong structure provides dependable protection and safety.. Good Protection Rear Step Bumper plated is made of heavy-duty steel,which is can effectively avoid damage to the vehicle caused by collisions. Durability Made of premium quality steel. The surface is chrome-plated and powder coated effectively for a longlasting lifetime.. Installation Directly bolt-on. If you have no previous installation experience, we sincerely recommend that you choose professional installation..

COMPATIBILITY Hooke Road Discovery front bumper is compatible with 2007-2013 Toyota Tundra Regular Cab, Double Cab, and CrewMax pickup trucks. RUGGED OFF-ROAD STYLE 3-piece modular steel design offers a bold, aggressive look while providing excellent front-end protection. Precisely follows factory body lines and includes a solid skid plate for under-engine protection. WINCH RECOVERY READY Built-in winch plate rated for up to 12,000 lbs, fits winches with standard 10 4.5 bolt pattern. High-strength D-ring mounts support up to 4.75 tons, welded inside and out for durability D-rings not included. ENHANCED VISIBILITY This offroad bumper comes with 418W LED spotlights to increase visibility during nighttime driving or harsh weather conditions. DURABLE CONSTRUCTION Made from 11-gauge 18 high-tensile steel for the bumper body and 10-gauge 964 steel for the winch plate and mounting structure. This tundra bumper weighs approximately 102 lbs. CORROSION-RESISTANT FINISH Features a textured black powder coat and premium E-coating on the interior for superior corrosion resistance and long-term durability in tough environments. BOLT-ON INSTALLATION No cutting, drilling, or modification required. Directly bolts to factory mounting points using included hardware and detailed instructions. WARRANTY Backed by a 2-year limited manufacturer warranty from the date of purchase and lifetime customer support from Hooke Road.

FitmentCompatible with 2022 2023 2024 2025 Toyota Tundra models. Please confirm that this product fits your vehicle before purchasing. If you encounter any problems, please contact us right away with your vehicle's exact year and model, as well as photos of the installation issue. We are dedicated to addressing and resolving the issue as promptly and efficiently as we can.. Complete AccessoriesThe front bumper comes with dual sturdy D-ring shackle mounts, welded securely both internally and externally. It's also equipped with a 12,000 lbs winch plate, two 4.75-ton D-rings and a license plate bracket. We include installation instructions and all required screws for an easy setup.. Superior QualityCrafted from durable high-strength steel, our front bumper features a two-stage textured black powder coating that provides strength, style, and protection. It's also rust-resistant, guaranteeing enduring performance and a polished appearance, even in case of powder coating damage.. Bolt-on InstallationThe front bumper itself doesn't require cutting, it's the car that needs cutting. Once the cutting is done, the subsequent installation is a straightforward bolt-on process. For safety reasons, we highly recommend professional installation.. NoteThe bumper does not include extension harnesses for connecting the lights. Extension harnesses need to be purchased separately..

Perfect Fitment This full-width Tundra front bumper is compatible with Toyota Tundra models from 2007 to 2013. Please verify the vehicles model and year before placing an order.. Premium Material Crafted from high-quality carbon steel and treated with an E-coating process and textured black powder coat finish, this front bumper is highly resistant to wear and corrosion, ensuring long-lasting durability.. Robust Winch Plate The winch plate is constructed from high-strength steel and features a reinforced design capable of handling up to 12000lbs.. Integrated Lighting Equipped with a built-in 144W LED long light bar and four 18W square lamps, this front bumper enhances the off-road style of your vehicle and provides illumination for nighttime adventures. No wiring harness to connect the lights. Effortless Installation 3-piece design, this tundra front bumper includes all necessary mounting hardware for direct bolt installation, requiring no modification or drilling. With sensor holes but no sensors.

Reliable Everyday Protection VRC's replacement front bumper shields your truck from unexpected scratches, curbs, abrasions, and minor impacts, helping preserve its rugged appearance and shielding it from everyday wear and tear. One-Piece Construction Crafted as a single, reinforced piece, this front bumper cover resists cracks and splits, maintains its shape, and provides reliable, long-lasting protection for your vehicle's front end. Exact Replacement Compatible with 2007-2013 Toyota Tundra, this front bumper face bar features pre-cut fog light parking sensor openings and meets OEM standards with part number TO1002181 for a perfect fit. Durable Steel Build Made from heavy-duty steel with a nickel-plated surface, this bumper cover fascia offers superior resistance to cracking, fading, wear, and corrosion, and has passed 72-hour salt spray testing for lasting performance. Eye-Catching Chrome Finish The mirror-like chrome finish not only gives your truck an attention-grabbing appearance while providing enhanced protection against oxidation and punishing daily use.

Compatibility The front bumper kit is compatible with 2007-2014 Toyota Tundra, 2008-2022 Toyota Sequoia, for models with front park assist sensors. Replacement for TO1032108, TO1010102, TO1033108, TO1014100, TO1002181, 521110C901, 521290C901, 525380C020, 525370C020, 525060C050. Feature The front bumper kit is made of steel and plastic. Chrome, painted and electrophoresis surface finish ensure this bumper kit adopt to outside weather conditions, not easy to scratched. Color is black and silvery. Function The front bumper kit absorb and disperse the impact force in low-speed crash. With parking aid sensor holes, it is convenient to observe the road conditions ahead of the vehicle when parking. Installation No need any accessories, it is directly replacement. Professional installation is still recommended. Package Content 1 X front bumper face barsplit design, 3 pcs with fog light holes, 1 X upper bumper cover, 3 X bumper retainer. Including assembly accessories and assembly manual, no installation hardware.

Application- Hooke Road rear bumper compatible with 2014-2021 Toyota Tundra Regular Double Cab Crewmax. Not compatible with factory back-up sensors. Offroad Use- Retains factory hitch receiver. Pre-cutout for trailer connector. Shackle mounts are robotic-welded onto the bumper from the inside and outside. 9500 lbs rated, 34 D-rings included. License Plate Corner Steps- Includes license plate mounting holes and works with factory license plate light. Integrated corner steps for easy access to the truck bed. LED Lighting- Comes with 2x 18w high power LED floodlights. Improve visibility in low-light situations or inclement weather. Heavy-Duty Construction- High tensile 11 gauge964 Inch steel for strength. Bumper weight about 95 lbs. Durable Coating- Textured black powder coat finish Premium E-coating process inside for long-lasting durability and corrosion resistance. Easy Installation- Direct bolt-on upgrade replacement for your original stock bumper. No cutting, drilling or modification required. Warranty- Manufacturer warranty for 2-Year from date of purchase. Lifetime customer support from Hooke Road.

Condition New. Material Plastic Steel. Interchange Part Number TO1000198 TO1002170 TO1095180 TO1067127 TO1066127. OEM 521010C020 521190C010 521410C010 521420C010 539110C010. Fitment Type Direct Replacement. Warranty 1 Year.

Bumper Compatible with 2000-2006 Toyota Tundra. Interchange Part Number 521010C020, TO1002170. Finish on the Bumper is Chrome. This Bumper is a Direct Fit Aftermarket Replacement Product. 1-Year Warranty When Purchased through Auto Parts Giant. Easily restore your vehicle's appearance with this high-quality bumper replacement..

FITMENTRear Bumper Assembly Compatible with 00-06 Toyota Tundra without Rear Object Sensor OEM No TO1103107. ACCESSORIESBumper and brackets are included. Crafted from ? , making it simple to install without the need for assembly. Its robust design ensures maximum safety for a worry-free driving experience.. IMPACT-RESISTANT TOUGHThe high-impact shell provide excellent protection from road debris abuse and the impact of branches on the trail and also better withstands the shock and vibration of off-road adventures.. DIRECT REPLACEMENT Installation instruction is not included. Professional installation would be highly recommended.. SERVICE30 Days Refund 365 Days Defective Item Replacement Warranty If you're not sure that if this item fit your car, please contact and tell us your car model before purchase..

Fitment This off-road rear bumper compatible with 2014-2021 Toyota Tundra 2WD4WD. Fits Both 2 and 4 Wheel Drive model. Heavy Duty Protection This sturdy rear bumper can withstand road and off-road inspect and help deflect impact debris. Protect your car from serious damage in a rear-end collision. Good Off-Road Performance This rear bumper provides a more aggressive appearance for your vehicle with its solid structure and black powder coating. 2x18w LED lights not only enhance the off-road style of vehicles, but also provide you with lighting and safety on dark roads. Specification Color Black for enhanced off-road style Material Made of heavy duty steel. Surface Finish Textured black powder coat finish for long-lasting durability and high strength. Installation Package Direct bolt-on. Precision designed to match your vehicles body lines. Come with 1 X Rear Bumper and 2 X 18w Led Floodlights. Mounting Hardware Kit and Installation Instruction are included.

Vehicle Compatibility Compatible with 2000-2006 Toyota TundraBase, Limited, SR5. Only for regular and access cab. Replacement for 521010C010 TO1002171. Please ensure you check your vehicle model before purchasing to avoid buying an incompatible part. Premium Material The front bumper face bar is made of high-strength steel to ensure a solid structure. The surface is black with powder coated finish, which has long lasting durability and maintains good appearance even after long term use in outdoor harsh environments. Appearance Enhancement Front Bumper Face Bar matches the body style, which can effectively highlight the vehicle's rough and aggressive off-road characteristics and enhance the overall visual effect of the vehicle. Great Functionality This front bumper absorbs and reduces a portion of the impact force and guards the front of the vehicle from damage to other critical vehicle components in the event of a low-speed collision or scrape. Installation Note 1 X Front bumper face bar Black with necessary assembly hardware, no additional mounting accessories. Direct replacement. If you do not have the experience we recommend that you seek professional assistance to ensure a secure installation.

Compatibility - Hooke Road full width front bumper for 2007-2013 Toyota Tundra Truck. Not compatible with factory parking sensors. Full Protection -Includes a skid plate provides under carriage protection. With this installed, your trucks front end wont easily sustain damages since this bumper effectively deflects road debris with its strong build. Offroad Use-Bumper is equipped with high strength shackle mounts and 2x 18W LED spotlights. Accommodated with a 22 straight LED light barNot Included. Heavy-Duty Construction- Heavy-duty, high tensile 11-gauge18 Inch steel for the bumper main body, 8-gauge1164 Inch for the parts of mounting bracket. Durable Coating- Textured black powder coat finish Premium E-coating process inside for long-lasting durability and corrosion resistance. Easy Installation - No cutting, drilling or modification required. Direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. Warranty - Manufacturer warranty for 2-Year from date of purchase. Lifetime customer support from Hooke Road. Item Weight- Bumper weighs about 83 lbs.

Fitment The Rear Bumper Step Pad Kit is compatible with 2007-2014 Toyota Tundra models. It serves as a replacement for part numbers TO1196100, TO1197100, 521640C040, 521630C040, and TO1191101. Durable Construction Made from PP plastic, this rear bumper step pad kit is built for exceptional durability, providing excellent wear resistance and long-lasting reliability. High Strength Designed with high-strength materials and impact resistance, it offers reliable protection against bumps and scratches, ensuring long-term performance. Easy Installation Featuring a convenient snap-in design, this kit allows for quick and tool-free installation on your vehicle's rear bumper. Package Includes 3 Rear Bumper Step Pads. Please note that installation instructions and accessories are not included.

Note Your order may be split and fulfilled from multiple locations - arriving on different days.. Front, Lower Bumper Compatible with 2009-2014 Ford F-150 For Models With Steel Bumper, Extended Cab Pickup Access Cab. Components 1-Bumper, 2-Bumper Bracket, 1-Bumper Reinforcement, 2-Fog Light. Interchange Part Numbers 521010C020, TO1002170, 521420C010, TO1066127, 521410C010, TO1067127, 521310C010, TO1006168, 812200C010, TO2592102, 812100C010, TO2593102. Finish on the Bumper is Chrome. Easily restore your vehicle's appearance with this high-quality bumper replacement..

?Chrome Steel Finish Thick heavy gauge metal triple chrome plated.. OE Equivalent Performance Aligns with the original equipment standards of your vehicle. Providing the same look and fitment of the original equipment manufactured part, these are the same parts your local body shop will use for repairing your vehicle.. Pre-Drilled Holes Specifically designed with pre-drilled holes for user-friendly installation.. Cost-Effective Alternative Provides a pocket-friendly alternative for cost-conscious customers looking to beat the price of dealerships and body shops.. Designed for Toyota Tundra Direct replacement for 2007-2013 Toyota Tundra models without park assist sensors..

Fitment Front Bumper Upper is compatible with 2007-2013 Toyota Tundra. Replacement for TO1014100 521290C901. Premium Material Made of durable PP plastic. The PP plastic material makes this bumper cover lightweight and durable. Painted surface treatment not only enhances the product' s appearance and functionality but also improves its durability. Function The front bumper upper cover not only absorb and disperse the impact force in low-speed crash, but also have a decorative function. Its matte black color are usually coordinated with the appearance design of the vehicle. Easy Installation Directly replacement. The process is easily. Professional installation is also recommended. Package Included 1 X Front Bumper Upper Cover, without instruction and hardware.

?Chrome Steel Finish Thick heavy gauge metal triple chrome plated.. OE Equivalent Performance Aligns with the original equipment standards of your vehicle. Providing the same look and fitment of the original equipment manufactured part, these are the same parts your local body shop will use for repairing your vehicle.. Pre-Drilled Holes Specifically designed with pre-drilled holes for user-friendly installation.. Cost-Effective Alternative Provides a pocket-friendly alternative for cost-conscious customers looking to beat the price of dealerships and body shops.. Designed for Toyota Tundra Direct replacement for 2007-2013 Toyota Tundra models with park assist sensor and without rock warrior package..

Compatibility - Compatible with 2007-2014 Toyota Tundra and 2008-2022 Toyota Sequoia models equipped with front park assist sensors - Direct replacement for part numbers TO1002181 and 521110C901 - Note This front bumper face bar features a split 3-piece design not a 1-piece unit. Material Finish - Made of steel with chrome surface finish - Designed for outdoor use and regular driving conditions. Installation - Direct replacement for damaged face bars - Professional installation recommended. Function - Includes pre-cut openings for parking aid sensors - Helps maintain sensor functionality. Package Contents - Includes 1 front bumper face bar 3 separate pieces requiring assembly with assembly accessories and manual - Note Installation hardware not included.

Application- Front Bumper designed for Toyota Tundra models 2007 2008 2009 2010 2011 2012 2013.. Well Protection- Features a 3-piece design with a full-width Tundra front bumper for a rugged off-road appearance and superior protection.. Practical Design- Comes with 218w LED lights and 1 144W long light bar, provides adequate lighting at night.. Durable Coating- Constructed from heavy-duty, high tensile steel. Finished with a textured black powder coat and treated with a premium E-coating process internally to ensure long-lasting durability and resistance to corrosion.. Easy Installation- Easy to assemble, it serves as an upgrade replacement for the original stock bumper, utilizing the factory mounting points. With pre-drill sensor holes but no sensors. Easy Installation- Easy to assemble, it serves as an upgrade replacement for the original stock bumper, utilizing the factory mounting points. With pre-drill sensor holes but no sensors.

Range Of Application Compatible with 2014-2021 Toyota Tundra 1794BaseLimiteddNightshadePlatinumSR5SRTRD,Please check your car model before purchasing.. Premium Material Made of high-quality plastic, it is not easily broken or bent, durable, and has a long service life. It ensures continuous performance under various driving conditions. Replaces Original OE Part 539110C050, 531120C020, 521120C080, 521130C080, 8121002160, 8122002160. Partslink Number TO1000404, TO1036147, TO1005184, TO1004182, TO1038175,TO1039175. Package Include 1 x Front Bumper Cover, 1 x Front Bumper Lower Grille, 2 x Front Bumper End Cap 1PairLR Side, 2 x Fog Lights 1PairLR Side, 2 x Fog Lights Bezel 1PairLR Side.Installation instructions are not included. If you do not have relevant experience, it is recommended to choose a professional installation. After-sales Service We have a complete pre-sales and after-sales process. If you have any questions, please contact us and we will provide you with a reliable and accurate replacement solution.

Product Compatibility - Engineered exclusively compatible with 2000-2006 Toyota Tundra. Directly Replace - Replacement for TO1102229 521510C021. Installation Method - Simply replace using bolts, no drilling or cutting required. Please note Assembly accessories and instruction are NOT included. High-Grade Material - Crafted from heavy-duty, chrome steel, engineered to absorb serious impact energy. Appearance Upgrade - Chrome finish blends seamlessly with vehicle rear. Restores new appearance.

Vehicle Compatibility This bumper face bar is Compatible with 2000-2006 Toyota TundraBase, Limited, SR5. Only for regular and access cab. Replacement for 521010C020 TO1002170. Please ensure you check your vehicle model before purchasing to avoid buying an incompatible part. Premium Material The front bumper cover is made of high-strength steel to ensure a solid structure. The surface is silver with chrome finish, which has long lasting durability and maintains good appearance even after long term use in outdoor harsh environments. Appearance Enhancement Front bumper face bar matches the body style, which can effectively highlight the vehicle's rough and aggressive off-road characteristics and enhance the overall visual effect of the vehicle. Great Functionality This front bumper impact bar absorbs and reduces a portion of the impact force and guards the front of the vehicle from damage to other critical vehicle components in the event of a low-speed collision or scrape. Installation Note 1 X 3pcs front bumper face bar Silvery with necessary assembly hardware and installation instructions, no additional mounting accessories. Direct replacement. If you do not have the experience we recommend that you seek professional assistance to ensure a secure installation.

Vehicle Compatibility This bumper step pad is compatible with 2014-2021 Toyota Tundra models. It serves as a direct replacement for part numbers TO1191104 and 520570C061. Functional Benefits The step pad provides rear-end impact protection, helping to minimize damage from impacts. It also offers a stable step surface, making it easier to enter or load the vehicle. Good Durability This product is black in color, made of automotive-grade plastic, and designed for rear mounting. It is lightweight yet durable, able to withstand deformation and cracking, and engineered for long-term use. Installation Value Designed for bolt-on mounting. Professional installation is recommended for optimal fit and secure performance. In addition to protective function, this bumper step pad enhances the vehicle's appearance and everyday utility. Package Contents The package includes one bumper step pad without sensor hole please note that installation hardware and instructions are not included.

CompatibilityRear Bumper Face Bar compatible with Toyota Tundra 2000-2006.. Product FunctionCome with set of 1 primered black finish rear bumper face bar, can replace the broken or missing oem face bar for refresh appearance of vehicle with a visually striking presence.. Premium MaterialsIt is made of heavy duty stamped steel construction to guarantee an extremely long lasting performance life in outdoor conditions.. OEM Factory StyleIt is made specifically for your vehicle with exact factory style appearance and function which will make you enjoy the convenience.. Easy InstallationPlug-n-Play Operation, direct bolt-on OE fitment and replacement for factory unit, fast and easy to install without any drilling or modification..

Fitment This off-road rear bumper compatible with 2014-2021 Toyota Tundra 2WD4WD. Fits 2 and 4 Wheel Drive. Heavy Duty Protection This sturdy rear bumper can withstand road anid off-road inspect and help deflect impact debris. Protect your car from serious damage in a rear-end collision. Good Off-Road Performance This rear bumper provides a more aggressive appearance for your vehicle with its solid structure and black powder coating. 2x18w LED lights not only enhance the off-road style of vehicles, but also provide you with lighting and safety on dark roads. Specification Color Black for enhanced off-road style Material Made of heavy duty steel. Surface Finish Textured black powder coat finish for long-lasting durability and high strength. Installation Package Direct bolt-on. Precision designed to match your vehicles body lines. Come with 1 X Rear Bumper and 2 X 18w Led Floodlights. Mounting Hardware Kit and Installation Instruction are included.

Compatibility The front bumper kit is compatible with 2007-2014 Toyota Tundra, 2008-2022 Toyota Sequoia. For models with front park assist sensors. Replacement for TO1014100, TO1002181, 521110C901, 521290C901. Feature The front bumper kit is made of steel and plastic, the color is black and silvery. Chrome and painted surface finish ensure this bumper kit adopt to outside weather conditions, not easy to scratched. Function The front bumper kit absorb and disperse the impact force in low-speed crash. With parking aid sensor holes, it is convenient to observe the road conditions ahead of the vehicle when parking. Installation Directly replacement. Professional installation is still recommended. Note This bumper kit is not including bumper brackets and fasteners. Package Content 1 X front bumper face barsplit design in 3 pcs with fog light holes, 1 X upper bumper cover. Including assembly accessories and assembly manual, no installation hardware.

Fitment Specifically engineered for 2007-2013 Tundra models. This full-width rear bumper provides superior protection for your trucks rear end, shielding it from impacts, debris, and trail obstacles with a rugged, aggressive look.. Heavy-Duty Construction Made from high-strength carbon steel with reinforced welding for maximum durability. The dual-stage textured black powder coating and E-coating process provide superior resistance to wear and corrosion in diverse weather conditions.. Integrated Lighting Access Features dual 18W LED pods and a built-in license plate light for enhanced visibility during night driving. Includes a non-slip step plate, providing secure and easy access to the truck bed or cargo area. Note Wiring harness not included.. Towing Recovery Ready Equipped with a built-in trailer plug port for towing needs and two integrated D-Rings to support heavy-duty off-road recovery tasks. This bumper is designed to handle demanding utility and rescue missions.. Bolt-On Setup Sensor Ports Utilizes mounting points for a direct bolt-on installation with no drilling or cutting required. Includes precision-cut holes for factory rear sensors and built-in license plate mount holes. Note Sensors not included..

FITMENT Front Bumper Compatible with 2007-2013 Toyota Tundra. Please check your car model before purchasing.. HEAVY DUTY Made of 316 cold rolled steel body with excellent strength and durability. 2-stage powder coating for long-lasting lifespan. Applicable to all kinds of bad weather and environment.. HIGH PERFORMANCE Provide superior protection for your vehicle when youre driving up a steep driveway, parking close to curbs, or going over roads with massive potholes.. PACKAGE LIST You will receive 1 Full-Size Off Road steel FRONT 3 PIECE bumperhardware and 2 D-ringsLights. Note This bumper will be sent from 2 packages. Instructions not included.. INSTALLATION Direct bolt on. No modification required. Professional installation is highly recommended..

Fitment Compatible with 2014-2021 Toyota Tundra. Replacement for 539110C050, TO1000404. Material Made from robust black plastic, this bumper cover is built to withstand the rigors of daily use and is engineered for durability and impact resistance. Performance The Front Bumper Cover protects the underlying structures of your vehicle from minor impacts and debris during everyday driving or off-road adventures. It also helps restore your truck's appearance, making it look new again while providing improved functionality. Package 1 X Front Bumper Cover, mounting accessories and instructions are not included. Installation Easy to install, you just need to replace the old one.

WIDE COMPATIBILITY This front bumper ompatible with 2000 2001 2002 2003 2004 2005 2006 Tundra models. The sensor holes in the bumper do not apply to the original. EASY TO INSTALL This 2001 Tundra Front Bumper is designed for easy installation, no cutting or drilling is required,direct bolt-on. BUILT-IN LED LIGHTS DESIGN 2005 Tundra Front bumper with winch plate and sensor holes LED Lights D-rings Install hardware and manual. The LED Llights can not only produce visual beauty, but also provide you with lighting and safety on dark roads. HIGH QUALITY 2001 Tundra Front bumper are made of 532 inch steel plate and 2 inch X 0.120 inch steel pipe. E-coating process and textured black powder coat finish make the wear resistance and corrosion resistance of the bumper better. MORE DETAILS 2006 Tundra Front bumper size 43X22X15. Weight 147lbs. NOTE 2003 Tundra Front Bumper does not include wiring harness.

Check Your Fitment The Peforway front bumper fits for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021, 2 Door and 4 Door. Please confirm the Make, Model and Year of your truck before ordering. Heavy Duty Construction Heavy-duty Carbon hard steel sheet tolerance steel tubing. Ultra-rugged, Screw fixation design for extra strength, protects the front of the vehicle. The black powder-coated surface has more strength and stiffness, as well as long-lasting durability. LED Corner Light Design The off road front bumper fit for Tundra is equipped with 2 x LED Corner Lights. Enhance visibility and safety during night driving, making your vehicle stand out with their modern design. Upgrade your front bumper with our LED corner lights for a sleek and functional upgrade. Rerain Sensor Holes Keep Your Safety Systems Intact. This offroad front bumper is meticulously crafted to retain the original sensor holes, ensuring your vehicle's parking and safety systems remain operational. It guarantees a suitable match with your car's existing features, maintaining both functionality and appearance. Easy Installation Features a straightforward bolt-on design, utilizing existing mounting points on your vehicle. The package of the front bumper off-road for Tundra includes necessary mounting hardware and detailed instructions for a hassle-free installation experience. You can quickly upgrade your vehicle's front end with less effort. What You Get 1 x Front Bumper with sensor holes corner lights, 1 set Screws, Washers Kit Mounting Hardware, 1 x Installation instruction. If you have any questions about installation or concerns about the bumper, Peforway is here available to assist you. Functional Design The preserved light bar mounting bracket provides the flexibility to add auxiliary work lights as needed. The off road bumper front is designed to complement the lines of your pickup, giving it a modern and aggressive look and enhancing both the appearance and functionality of your vehicle. Ready for Any Adventure with Customizable Lighting.

Fitment Compatible with 2000-2006 Toyota TundraBase, Limited, SR5. Only for regular and access cab. Replacement for TO1002171 521010C010. Feature The front bumper face bar is constructed from high-strength alloy steel for a solid structure and features a durable black powder-coated finish that withstands harsh outdoor environments while maintaining its appearance. Function This front bumper absorbs and reduces impact force in low-speed impacts, helping to protect critical vehicle components from damage. Installation Bolt-on installation, direct replacement. Assembly required. Package 1 Front bumper, assembly hardware and instructions are included.

FitmentPrior to your purchase, kindly ensure that the product is compatible with Toyota Tundra models spanning the years 2014 2015 2016 2017 2018 2019 2020 2021.. Complete AccessoriesLoaded with functionalities, our rear bumper boasts a stainless steel skid-resistant plate, two 4.75-ton D-rings, sensor holes, detachable decor, and four powerful 18W LED spotlights. Engineered with pre-drilled holes for the license plate, license plate lights, and a trailer plug, it arrives complete with installation instructions and screw fittings.. Excellent craftsmanshipFashioned from durable high-strength steel and treated with a two-stage textured black powder coat, our rear bumper seamlessly merges strength with aesthetics, delivering steadfast protection. Its resistance to rust guarantees lasting performance and a sleek look, even in the face of potential damage to the powder coating.. Easy to InstallFeaturing a straightforward bolt-on design, our Rear Bumper guarantees effortless installation without requiring any vehicle alterations, allowing for a swift and hassle-free setup. However, for safety purposes, we highly recommend seeking professional installation services.. Note The bumper does not include extension harnesses for connecting the lights. The sensor holes do not support the installation of original sensors. Extension harnesses and sensors need to be purchased separately..

FitmentCompatible with 2022 2023 2024 2025 Toyota Tundra models. Before completing your purchase, please make sure that the product is suitable for your vehicle. If you encounter any issues, please contact us promptly with your vehicles year, model, and photos of the problem area. Well work to resolve it quickly.. Complete AccessoriesThe front bumper includes a 12,000 lbs winch plate, two 4.75-ton D-rings and a license plate bracket. The rear bumper is equipped with two high-powered 18W LED spotlights, license plate lights, D-rings, four sensor holes and pre-drilled holes for a license plate and a trailer plug. Both bumpers come with installation instructions and screws for a hassle-free setup.. Excellent craftsmanshipOur steel front and rear bumpers are durable, with a two-stage textured black powder coating for style and protection. They resist rust, ensuring lasting performance, even with coating scratches.. Bolt-on InstallationThe front bumper itself doesn't require cutting, it's the car that needs cutting. Once the cutting is done, the subsequent installation is a straightforward bolt-on process. The rear bumper requires no modifications to your vehicle. For safety reasons, we highly recommend professional installation.. Note The bumper does not include extension harnesses for connecting the lights. The sensor holes do not support the installation of original sensors. Extension harnesses and sensors need to be purchased separately..

FitmentBefore completing your purchase, please confirm that the product is compatible with your vehicle, ensuring its suitability for Toyota Tundra models in the years 2022, 2023, 2024, and 2025. If you encounter any issues, please contact us promptly with your vehicles year, model, and photos of the problem area. Well work to resolve it quickly.. Complete AccessoriesThe front bumper includes a 12,000 lbs winch plate, a skid plate, two 4.75-ton D-rings, a license plate bracket, detachable decor, four sensor holes and two 18W LED spotlights. The rear bumper is equipped with two high-powered 18W LED spotlights, license plate lights, D-rings, four sensor holes and pre-drilled holes for a license plate and a trailer plug. Both bumpers come with installation instructions and screws for a hassle-free setup.. Durable StylishOur front and rear bumpers are meticulously crafted from high-strength steel and coated with a durable black powder finish. They provide excellent defense against rust and maintain reliable performance and aesthetics, even if the coating is damaged.. Bolt-on InstallationThe front bumper itself doesn't require cutting, it's the car that needs cutting. Once the cutting is done, the subsequent installation is a straightforward bolt-on process. The rear bumper requires no modifications to your vehicle. For safety reasons, we highly recommend professional installation.. Note The bumper does not include extension harnesses for connecting the lights. The sensor holes do not support the installation of original sensors. Extension harnesses and sensors need to be purchased separately..

Wide Applicability Full width front bumper bar for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 to upgrade.. High Quality The front bumper is welded by 4mm high-quality carbon steel. premium E-coating process and textured black powder coat finish make the wear resistance and corrosion resistance of the front bumper better, which can be protected for more than 5 years in normal use.. Winch Plate The winch plate is made of 4mm high-strength steel plate, and the bending reinforcement design is also added in the structure, which can up to 12000lbs.. Built-in Light Built-in 1x 144W LED long light bar, 4x 18W square lamp,that enhances the off-road style of your vehicle and facilitates night adventure.. Easy Installation This bumper kit includes Mounting Hardwares, direct bolt installation. No modification or drilling is required..

Applicable Range Our Front Lower Bumper Kit Can Fit For 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Tundra Cab Pickup 4-DoorPls Attention This front lower bumper kit is unpainted. Due to the manufacturing process, there may be some traces. After receiving the package, you are required to carry out the spraying process according to your own needs. . Just For Models Without Park Assist System. Package List Come with 1 x Front Bumper Cover, 1 x Front Bumper Lower Grille, 2 x Front Bumper End Cap. Instructions and installation hardware are not included. OEOEM Part Number 521120C080, 521130C080, 539110C050, 531120C020 Manufacturer Part Number TO1004182, TO1005182, TO1000404, TO1036147. Easy To Install No additional modifications or special tools are required, allows for quick enhancement of the vehicle's appearance. Used to restore the front appearance of the vehicle and prevent damage caused by road obstructions and minor impacts. High Quality Constructed of high quality plastic for light weight and durability, cope with any kinds of weather and environment, no aging or cracking. A simple replacement can enhance the smooth and integrated appearance of the front panel of your vehicle. Pls Attention This front lower bumper kit is unpainted. Due to the manufacturing process, there may be some traces. After receiving the package, you are required to carry out the spraying process according to your own needs.

Application- ExplorerX front bumper with robust bull bar fits for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 Regular Cab, Double Cab, CrewMax pickup trucks. Compatible with factory front parking sensors. Enhanced Protection- This full width bumper combines aggressive style with superior strength. Includes a full grille guard and silver stainless steel skid plate for enhanced front-end protection against brush, rocks, and other trail debris. Winch-Ready Recovery-Ready- Equipped with a winch plate rated up to 12,000 lbs and heavy-duty D-ring shackle mounts D-rings not included, making it a reliable recovery-ready upgrade for off-road adventures. Practical Design- Equipped with 49W white LED spotlights comes with a flip-up license plate mount. Whether driving on rough off-road routes or on city roads, it can provide you better visibility and ensure your legal driving. Decorated with a durable honeycomb steel plate in the middle, adds a sleek and modern look to your Tundra. Sturdy Construction- Heavy-duty, high tensile 11-gauge 18 in steel plate for bumper main body, 1.570.06 and 1.260.06 steel tube for bull bar, 9-gauge532 in steel plate for mounting structure and winch platewhile maintaining a manageable weight of 108 lbs to strike a balance between the performance and robustness. Corrosion-Resistant Finish- Features a textured black powder coat with a premium E-coating inside, offering exceptional corrosion protection for long-lasting durability, even in harsh weather or muddy trails. Easy Upgrade- No cutting, drilling or modification required. Direct bolt-on installation reusing the factory mounting points. Comes with mounting hardware kit and detailed instruction. Warranty Support- Purchase with confidence, backed by our 2-year manufacturer warranty and dedicated lifetime customer service from Hooke Road.

Application- Hooke Road Guardian rear bumper fits for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 Regular Cab, Double Cab, CrewMax pickup trucks. Compatible with factory backup sensors. Not compatible with blind spot monitoring BSM system. Enhanced Protection- Full width structure off-road bumper provides a robust protective solution that surrounds the rear end, absorbing impacts and shielding the vehicle from rocks and other obstacles. Decorated with a brushed gray stainless steel plate in the sides for a sleek, eye-catching style. Practical Design- Comes with 225W LED white spotlights and a license plate light, providing extra illumination in poor weather or nighttime conditions. Wiring harness is not included. 18-gauge wire is required for a safe connection. Features pre-cut outs for license plate mount and factory trailer plug.. Recovery-Ready- Retains the factory hitch receiver. Features robust D-ring shackle mounts, providing reliable attachment points that up to 4.75 tons for recovery operation. D-Rings not included. Robust Build Quality- Heavy-duty, high tensile 11-gauge18 inch steel for the bumper main body, 9-gauge532 inch for mounting structurewhile maintaining a manageable of 68 lbs profile to strike a balance between the performance and robustness. Corrosion-Resistant Finish- Dual-layer protection with outer textured black powder coating and inner E-coating to resist scratches, rust, road salt, and UV fading, keeping the bumper looking clean and durable in harsh weather or muddy trails. Simple Bolt-On Installation- Enjoy a hassle-free installation with a direct bolt-on design. No drilling or modification required, utilizing factory mounting points for a perfect fit. All mounting hardware and detailed install guide included. Warranty Support- Purchase with confidence, backed by our 2-year manufacturer warranty and dedicated lifetime customer service from Hooke Road.

Application- Hooke Road Guardian front bumper fits for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 Regular Cab, Double Cab, CrewMax pickup trucks. Compatible with factory front parking sensors. Enhanced Protection- The bumper features sharp angles and sleek lines with a solid skid plate. Built to absorb impacts and protect the front end of your truck. The professional-grade design and an eye-catching style also make it ideal for both daily driving and light off-road adventures. Practical Design- Works with factory tow hooks. Equipped with a flip-up license plate mount. Come with 49W white LED spotlights. Center panel features a durable honeycomb steel plate with internal brackets designed to fit a 22 straight LED light bar light bar not included, offering flexible lighting configurations. Heavy Duty Construction- High tensile 11-gauge18 in steel plate for bumper main body, 9-gauge532 in steel plate for the skid plate and mounting structure, while maintaining a manageable weight of 68 lbs to strike a balance between the performance and robustness. Corrosion-Resistant Finish- Features a textured black powder coat with a premium E-coating inside, offering exceptional corrosion protection for long-lasting durability, even in harsh weather or muddy trails. Easy Installation- Direct bolt-on design utilizing factory mounting points. No drilling is required. Includes all necessary hardware and detailed instructions for hassle-free setup. Warranty Support- Purchase with confidence, backed by our 2-year manufacturer warranty and dedicated lifetime customer service from Hooke Road.

Compatibility- Hooke Road Tundra front bumper is compatible with 2014-2021 Toyota Tundra, compatible with front parking sensors and factory tow hooks. Full-Width Front-End Armor- Three-piece modular steel construction delivers full-width protection for daily driving and offroad, with a widebody profile that sits flush with pocket-style fender flares for a seamless, integrated look that elevates your Tundras front-end presence. Integrated LED Lighting System- Comes equipped with 425W LED spotlights for enhanced visibility in low-light conditions wiring harness not included 18-gauge wire required for safe electrical connection. Includes a convenient flip-up license plate mount for street-legal compliance. Heavy-Duty Construction- Constructed with high-tensile steel for uncompromising durability 11-gauge 18 in steel for the bumper main body and 9-gauge 532 in steel for the mounting structure. Bumper weighs about 79 lbs. Rust-resistant Finishes- The textured black powder coat finish enhances its appearance while providing robustness. Premium E-coating internally safeguards against the elements, making it a reliable choice for daily driving and off-road adventures. Easy Installation- Direct bolt-on installation with no drilling required. Utilizes factory mounting points. Includes all necessary hardware and installation guide. Warranty Support- Backed by a 2-year limited manufacturer warranty plus lifetime Hooke Road support, giving you confidence and peace of mind for everyday driving, off-road adventures, and long-term ownership.

Compatibility- Hooke Road Tundra front bumper is compatible with 2014-2021 Toyota Tundra models and supports front parking sensors. Engineered for a precise fit and a bold, functional upgrade to your trucks off-road capability. Aggressive Styling Front-End Protection - Featuring a full-width three-piece modular construction with an integrated bull bar and grey stainless steel off-road tire tread pattern accents, this Tundra off-road bumper combines an imposing, aggressive look with enhanced front-end protection, making it ideal for rugged trails, rocky terrain, and extreme overland adventures. Off-Road Recovery- Equipped with high-strength D-ring mounts for dependable off-road self-rescue and vehicle recovery D-rings not included, this heavy-duty Tundra bumper also features a built-in winch plate rated to support up to 12,000 lbs, ensuring reliable performance when tackling unexpected trailside emergencies. Superior Lighting Functionality- Equipped with 29W and 225W LED spotlights for wide-angle night visibility, this Tundra functional bumper also features dual grille openings that accommodate 16 to 25 straight LED light bars sold separately, delivering extended illumination for safer off-road driving. The built-in flip-up license plate mount ensures hassle-free daily use and enhanced practicality. Heavy-Duty Construction- Made from 11-gauge 18 steel for the main body and 9-gauge 532 steel for the winch plate and mounting brackets, delivering structural integrity and reliable impact resistance. Total weight approx. 89 lbs for optimal strength balance. Dual-Layer Corrosion Protection- Textured black powder-coated exterior paired with inner E-coating for long-lasting rust defense. The rugged matte finish complements your trucks classic design while maintaining a premium off-road appearance. Effortless Installation- Designed for direct bolt-on installation using factory mounting pointsno cutting, drilling, or modification required. Includes mounting hardware and a detailed installation guide. Warranty Support- Backed by a 2-year limited manufacturer warranty plus lifetime Hooke Road support, giving you confidence and peace of mind for everyday driving, off-road adventures, and long-term ownership.

Fitment--Rear Bumper End Caps, will be compatible with 2014-2021 Toyota Tundra.. Replacement for 521520C030 521510C100 TO1104140 TO1105140. NoteFit models without parking sensors only. Made of sturdy steel for years of use. They come prepped with advanced electrophoresis.. Material Steel Color Black Surface Finish Electrophoresis. Package content End Caps X 1 pair. Built to strict quality control standards.. Installation--Direct replacement, direct bolt-on. Instruction is Not included. Professional Installation is highly recommended..

Wide Applicability Full width tundra rear bumper bar for Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 to upgrade.. High Quality The rear bumper is welded by 4mm high-quality carbon steel. premium E-coating process and textured black powder coat finish make The wear resistance and corrosion resistance of the rear bumper better, which can be protected for more than 5 years in normal use.. Antiskid Plate Stainless steel anti-skid plate is added on the middle step of the rear bumper bar, which can prevent skid and protect the bumper from scratching.. Built-in Light Built-in 2x18w LED light,that enhances the off-road style of your vehicle and facilitates night adventure.. Easy Installation This bumper kit includes Mounting Hardwares, direct bolt installation. No modification or drilling is required. Equipped with pre-drilled sensor holes sensors are not included. Excluding license plate lights for the rear bumper..

Compatible with2007-2013 Toyota Tundra,both for models withwithout Park Sensor Holes. Package Content1x Pickup Rear Bumper Assembly, 1 x Set of License Plate Lamps, 1 x Set of Mounting Brackets,Hardwares are Included. Replacement NumberTO1103116, TO1103118, 520230C120, 521510C090, 521780C030, 520570C030, 521510C070. Lifetime Servic Guaranteed quick response to all your questions life-long service for each purchase,providing you with peace of mind and confidence in your purchase.. Good Chrome Steel ConstructionThe rear step bumper assembly is made from using high quality steel and ABS plastic, it is designed to withstand impacts and protect the rear of your vehicle from damage.. Enhanced protection In the event of a collision, Our 2007 2008 2009 2010 2011 2012 2013 Tundra Rear Bumper absorbs and cushions the impact of the outside world, effectively mitigating collisions and scratches, and restoring your vehicle to like-new condition at all times, protecting both the vehicle body and passengers..

Compatible with2007-2013 Toyota Tundra 2nd Gen Pre-Facelift,for models without Park Sensor Holes. Package Content1x Pickup Rear Bumper,1 x Set of License Plate Lamps,1 x Set of Mounting Brackets,Hardwares are Included. Replacement NumberTO1103115, TO1103117, 520230C120, 520570C030, 521510C060, 521630C040, 521510C081. Lifetime Servic Guaranteed quick response to all your questions life-long service for each purchase,providing you with peace of mind and confidence in your purchase.. Good Chrome Steel ConstructionThe rear step bumper assembly is made from using high quality steel and ABS plastic, it is designed to withstand impacts and protect the rear of your vehicle from damage.. Enhanced protection In the event of a collision, Our 2007 2008 2009 2010 2011 2012 2013 Toyota Tundra Rear Bumper absorbs and cushions the impact of the outside world, effectively mitigating collisions and scratches, and restoring your vehicle to like-new condition at all times, protecting both the vehicle body and passengers..

FitmentThe front grill specially designed for 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Tundra truck. Replacement for 53101-0C031-C0, ensuring a flawless fit and simple installation with no modifications needed. Premium MaterialThe central bumper grille is made of high-quality ABS plastic, it has good mechanical and thermal properties, high surface hardness. This front upper grille trim protects your vehicle from debris and reduces damage or wear caused by impacts or scratches. FeatureElevate the look of your car, different colors painted finish that adds a touch of elegance and luxury. This stylish trim enhances your vehicle's exterior, making it stand out with a high-end appearance. Package1pcs front grille and car front grill hood bulge trim. Not include Installation Instructions. InstallationDirect Replacement, no vehicle modifications are required, No drilling, glue, welding required, the installation process will not damage the original parts of the car. Professional installation is highly recommended.

FitmentCompatible with 2007 2008 2009 2010 2011 2012 2013 Toyota Tundra models. Please make sure the product is compatible with your vehicle before making a purchase.. Complete AccessoriesThe front bumper includes two sturdy D-ring shackle mounts, a 12,000 lbs capacity winch plate, two 4.75-ton D-rings, pre-drilled holes for light bars, one 120W LED spotlight, and four 18W LED spotlights. The rear bumper features a stainless steel plate on the rear step for skid prevention, two 4.75-ton D-rings, sensor holes and four 18W LED spotlights. Both bumpers come with customizable detachable decor options to match your vehicle.. Excellent craftsmanshipOur front and rear bumpers are made of high-strength steel for durability. The two-stage textured black powder coating adds style and extra protection. They are engineered to withstand rust and maintain performance even if the powder coat is damaged.. Easy to InstallOur Front and Rear Bumpers come with a user-friendly bolt-on design for a hassle-free installation. No vehicle modifications are required, ensuring a quick and easy setup. However, for your safety, we strongly recommend considering professional installation services.. Note The bumper does not include extension harnesses for connecting the lights. The sensor holes do not support the installation of original sensors. Extension harnesses and sensors need to be purchased separately.. Full After-Sales Support2-year factory warranty and lifetime customer service support included. Installation instructions provided. Contact us for any questions or concerns..

Vehicle Compatibility Front bumper compatible with Toyota Tundra 2007-2013, fit models without parking sensor holes. Premium Material Construction Made of high quality steel, which is hardness enough and durability, can effectively protect the vehicle to reduce the external impact. Product Information 3-Piece Modular Design direct fit aftermarket replacement product. Chrome finish, can be paint to match vehicle's color. Easy Installation Process Convenient to plug play, direct bolt-on OE fitment or replacement for the stock unit, require no modification or drilling. Package Contents 1 X Front Bumper with heavy duty construction design. Direct OE Replacement Manufactured as a direct replacement for OEM Part Number TO1002181, ensuring proper fit and function. Chrome Polished Finish Features a polished chrome finish that enhances the appearance of your vehicle and can be customized with paint to match your vehicle's color scheme.

Fits Following Vehicles - 2014 2015 2016 2017 2018 for Toyota Tundra. Heavy-Duty Protection - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 532 steel sheet and 2X0.120 steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style.. Surface Protection. - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection... Package included - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes Front no Rear yes.. Bolt-on Installation - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..

Application- Offroad front and rear bumper Kit for 2007-2013 Tundra Pickup Truck. Not compatible with front and rear factory back-up sensors. . Tundra Front Bumper- Audacious, angular off-road design with low-profile hoop. Built-in winch plate rated up to 12,000 lbs. Includes 418w LED spotlights. Features high strength D-ring mountsD-Rings Not Included. Tundra Rear Bumper- 3-piece modular design. Rugged styling and protection bumper works with factory receiver hitch. Features high strength D-ring mountsD-Rings Not Included. Equipped with a license plate light 218w LED floodlights. Heavy-Duty Construction- Heavy-duty, high tensile 11-gauge18 Inch steel for the bumper main body 8-gauge1164 Inch for mounting bracket plate. Durable Coating- Textured black powder coat finish Premium E-coating process inside for long-lasting durability and corrosion resistance. Easy Installation - No cutting, drilling or modification required. Direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. Warranty- Manufacturer warranty for 2-Year from date of purchase. Lifetime customer support from Hooke Road. Product will be shipped in 2 boxes may not arrive at the same time. Package include front and rear bumper with all mounting hardware and detailed installation instruction.

IMPORTANT NOTICE - Pickup truck front bumper is compatible with 2014-2021 Toyota Tundra Exclude the radar blind spot monitoring systems. If you have any questions, please contact us to confirm fitment before ordering.. INNOVATIVE PATENT DESIGN IRONBISON foldable design Invention Patent can effectively reduce the damage during transportation. The bumper included 2 LED fog light with IP67 waterproof. You can use the provided light brackets kit to add an additional 30 center LED light bar for a better off-road experience.. RICH ACCESSORIES IRONBISON BARDE front bumper guard including customized splash guard and license plate relocation bracket, no worry about the refitting.. EASY INSTALLATION IRONBISON Tundra front bumper is engineered to be a direct bolt-on upgrade replacement for your truck original stock bumper reusing the factory mounting points. All mounting hardware and Installation instruction included.. NO-HASSLE WARRANTY IRONBISON Tundra Pickup truck front bumper with no-hassle 5-year warranty against manufacturing defects and products damaged during delivery..

1.Compatible with 2014-2015-2016-2017-2018-2019-2020-2021 Tundra. Not Compatible with Factory Back-Up Sensors.. 2. Package size and weight Front bumper size 47.2 x 20.9 x 15 Weight 146 lbs Rear bumper size 62.2 x 14.6 x 11.8 Weight 88.6 lbs Package size Product Size. 3.Material 532 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel pipe make the bumper more durable. The surface is also coated with black powder to form a black texture and is more resistant to corrosion. 4. Simple installation, please follow the procedure in the instruction manual. We offer unconditional after-sales service for up to two year.. 5. Package Included Front Bumper Rear Bumper 1x144W LED Light Bar 8 x 20W Aluminum LED lights 4 x 34 D-rings and shackle isolators 4 x D-shaped washers A set of Mounting Hardware Installation instructions excluding wiring harness . Sensor hole does not support original, the sensor hole diameter is 19.5mm.

Tough Heavy Duty Steel Construction.. Durable Quality Black Carbon Powder Coating.. Best Approach Angle and Maximum Tire Clearance. Includes 2 Rough Country LED Cubes, Integrated steps for easy access to bed, Retains factory receiver hitch, and Includes backup sensor relocators. Backed by Rough Country's Limited Lifetime Replacement Warranty..

Made of heavy-duty 5mm carbon steel with powder-coated black textured finish for extreme protection and rust-resistant. FITMENT - Compatible with 2014-2021 Tundra. TYGER patent pending unique design will make your vehicle stand out on the street Removable light covers for aftermarket lights and pre-drilled license plate holes for easy customization. Fits up to 22 middle ligth bars and up to 3 side light pods.. LED light bar mounting brackets included. Lights NOT included. Optional customized Skid Plate sold separately SKU TG-SP6T80568.. Easy Bolt-On installation. No drilling required. DIY instruction included in the package.. TYGER No-Hassle 5 year warranty for US customers against manufacturing defects.

Made of heavy duty 5mm carbon steel with powder coated black textured finish for extreme protection and rust resistant. FITMENT - Compatible with 2014-2021 Toyota Tundra Exclude blind spot alert and rear cross traffic alert system. Comes with predrilled holes for Parking Sensors, Tow Socket and License Plate Lights equipped on factory bumper.. TYGER patent pending unique design will make your vehicle stand out on the street Removable light covers for aftermarket lights and pre-drilled license plate holes for easy customization. Fits up to 3 side light pods.. Easy Bolt-On installation. No drilling required. DIY instruction included in the package.. TYGER No-Hassle 5 year warranty for US customers against manufacturing defects.