Made of High Quality material, Wear-Resistant, Corrosion-Resistant, Easy to Clean and Long service Life. Safe to stand even on mud, snow or ice. Package Including 1 x Rear Bumper Step. Part Number 82215289AG, 82215289AH, 82215289AB, 82215289AC, 82215289AD, 82215289AE, 82215289AF, 82215289. Replacement For Dodge Ram 1500 DT New Body Style 2019 2020 2021 2022 With Dual Exhaust Vehicles. Get easy access to your truck bed even when the tailgate is down. The features an articulating arm that lowers down for easy access to the truck bed and retracts back into the stored position with a gentle push to give an out of the way look within the bumper. The bumper and chassis of the truck is very high off the ground, getting in and out of the bed will be very troublesome and dangerous, so the retractable bumper tailgate pedal is a good choice. This product is installed in the lower corner of the tailgate. You can choose to install one on each side, so that there are steps in both directions, making it more convenient to use the trunk. Easy to install, telescopic steps, no extra space is needed, and it can bear the weight of an adult male. This easy-to-use, flip-down step mounts to vehicle frame and stores under the rear bumper when not use, Loaded with spring, can be deployed easily by stepping on, so it works even with an open tailgate or when towing.

Fitment OEDRO drop running boards specifically made to fit 2009-2018 Dodge Ram 1500 Crew Cab 4 full-size doors, 2019-2024 Ram 1500 Classic, 2010-2024 Ram 2500 3500. Not fit Quad Cab These side steps for Ram integrate seamlessly with your truck, enhancing its aesthetics and utility. Wheel to Wheel Bed Access Running Boards for Ram upgrade a dual convex platform design. 90.4in is a length longer than normal ones that simplifies unloading of roof and bed cargo without needing to climb into the truck bed. Two-Stair Layout Retained two-stair layout makes OEDRO step bars easy for all ages to step in and out of the vehicle The raised center step offers convenience for placing luggage or items on the roof. Heavy-Duty Material The rock sliders are powder coated carbon steel that offers excellent rust and corrosion resistance, and the ability to support up to 550 LBS without deformation. Easy Installation No drilling is required as it uses original hole positions for installation. The welded brackets provide additional strength for quick and simple assembly with minimal parts Note The brackets are not pre-welded to the step bar Ensure the boards match your vehicle.

Non-slip, retractable bumper step quickly flips down or retracts with the nudge of your foot providing a faster, easier and safer way to load or unload your pickup's cargo. High-strength aluminum alloy components Engineered to support loads up to 300 pounds. Precision stainless-steel pivot pins for rock-solid stability. Maintenance-free, self lubricating bushings for all-weather performance.

FITMENT Fits 2014 - 2018 Chevrolet Silverado 1500 GMC Sierra 1500 2015 - 2019 SilveradoSierra 2500 HD3500 HD 2019 SilveradoSierra 1500 LDLimited. STRONG RUGGED Engineered to support loads up to 300 lbs. MAINTENANCE-FREE Self-lubricating bushings for all-weather performance. HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS Precision stainless steel pivot pins for rock solid stability. WARRANTY AMP Research stands behind its products with a hassle-free, comprehensive 5-year60,000 mile warranty.. INSTALLATION Includes all hardware necessary for installation. Product comes with easy to understand vehicle specific installation instructions. Be sure to read and precisely follow the provided instructions when installing..

Replaces Part Retractable Bumper Step 82215289AG 82215289AG 82215289 82215289AB 82215289AC 82215289AD 82215289AE 82215289AF.While this is not genuine OEM part, it is a direct replacement.See below for the full vehicle compatible list. Compatible with Rear Bedstep with 2019 2020 2021 2022 2023 2024 Dodge Ram 2500 3500. Retractable Bumper Step Easy to install, telescopic steps, no extra space is needed, and it can bear the weight of an adult male. Options This product is installed in the lower corner of the left tailgate making it more convenient to use the trunk. Attention We sincerely appreciate the purchase of our Ram 2500 3500 bed step.If product has any quality issues, you can request to send a new product, we value your shopping experience.

Replacement Part Number-?82215842,82215842AB,82215842AC,82215842AE,82215842AD, 82215842AF,82215842AG. Before Ordering, Please Confirm Compatibility And Weather Are Suitable For Your Vehicle. Compatible Vehicle - Rear Bed Step Compatible With 2019 2020 2021 2022 Dodge Ram 2500 3500.. Advantage - The Retractable Bumper Side Tailgate Step Can Easily Solve The Difficult Problem Of Getting In And Out Of The Trunk Of The Car.100 Tested Before Leaving The Factory,Perfectly Matched,Installed Directly,And Installation is Simple.. High Quality- Our Rear Bed Step Made of High-Strength Metal,Wear-Resistant, Corrosion-Resistant, Easy To Clean, And Long Service Life.Can Bear Up To 300lb Weight.. After-Sales Service - We Have 1 Year Warranty, Worry-free Return And Refund Policy, Please Buy With ConfidenceIf You Have Any Questions About our product Please Contact Us,We Will Deal With It As Soon As Possible.

PATENT PENDING UPGRADED UNIVERSAL FIT TAILGATE LADDER MAKES GETTING IN AND OUT OF YOUR BED A BREEZE - Nowadays with pickup trucks as big and high off the ground as they are, its nearly impossible to step up into your bed. Beech Lanes Tailgate Ladder fixes this problem by providing a sturdy ladder that attaches to your bed tailgate and easily folds out when needed., Universal fit, extends up to 45. Does not fit Dodge RamBox, Chevrolet Avalanche or Cadilac Escalade Trucks. ALUMINUM STEP GRIP PLATES INCREASE TRACTION- The tailgate ladder comes with ultra durable mounted aluminum step grip plates for increased traction. Step confidently into your truck no matter if the ladder is wet from an unexpected thuderstorm or morning dew.. STURDY RUBBER LADDER FEET ENSURE HOLD ON THE GROUND- All ladders need a solid footing at the base, why shouldn't your tailgate ladder We've added secure rubber ladder feet to make sure the ladder has a sturdy base and connection point to the ground.. REINFORCED BIGGER STRAP AND HEAVY DUTY BUCKLE- Reinforced, bigger straps that come with a durable POM buckle make sure the ladder stays where it should.. BEECH LANE LIFETIME WARRANTY- Unlike other brands that have a short return policy window, Beech Lane has a LIFTIME WARRANTY on the tailgate ladder. If you experience any issue down the line you are guaranteed a free replacement or complete refund..

Non-slip, retractable step can be mounted on either side of the truck box, just behind the cab and forward of the rear wheel to provide easy access to the truck bed, tool box or 5th wheel hitch. Step quickly flips down or retracts with just the nudge of your foot and is engineered to support loads up to 300 pounds. High-strength aluminum alloy components and precision stainless-steel pivot pins for rock-solid stability.Do not apply silicon spray,waxes or protectants like Armour all to the stepping surfaces. Maintenance-free, self-lubricating bushings for all-weather performance.

Ram 1500 DT Retractable Bumper Step Bedstep, Ram 1500 Bedstep, For Dual Exhaust Vehicles, 2019-2021. OE Part 82215289AG, 82215289, 82215289AB, 82215289AC, 82215289AD, 82215289AE, 82215289AF. For 2019-2021 Ram 1500 DT Models New Body Style Dual Exhaust Vehicles. Features a no-drill installation, which providing a faster, easier and safer way to load or unload your pickups cargo. Manufacturued from high-strength aluminum with a black powder-coat finish and non-slip design, rated to support 300 lbs. This easy-to-use, flip-down step mounts to vehicle frame and stores under the rear bumper when not use, Loaded with spring, can be deployed easily by stepping on, so it works even with an open tailgate or when towing.. Brand New, 24 Months Warranty.

Easier entry and exit from your vehicle. 14 wide functional step area. Extends 2 further than our current steps.. Made of corrosion resistant, durable cast aluminum alloy for extreme longevity. Exclusive multi-mount system. Easier Entry And Exit From Your Vehicle. 14 in. Wide Functional Step Area. Extends Further Than Our Current Steps. Aggressive And Appealing Tread Design For A Non-Slip surface. Appealing Tread Design For A Non-Slip surface.

Constructed from lightweight and durable 6005A-T6 aluminum. Folds up out of the way when not in use. Universal application. Mountable on trucks with bed covers.

FITMENT Fits 2002 - 2008 Dodge RAM 1500 2003 - 2009 Dodge RAM 25003500. STRONG RUGGED Engineered to support loads up to 300 lbs. MAINTENANCE-FREE Self-lubricating bushings for all-weather performance. HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS Precision stainless steel pivot pins for rock solid stability. WARRANTY AMP Research stands behind its products with a hassle-free, comprehensive 5-year60,000 mile warranty.. INSTALLATION Includes all hardware necessary for installation. Product comes with easy to understand vehicle specific installation instructions. Be sure to read and precisely follow the provided instructions when installing..

Replaces PartTacoma bed step PT392-35100.Please check whether the model is suitable before ordering.. Compatible with2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 Tacoma models with a factory tow package.. Premium QualityTacoma bed step are made of reinforced, high-quality materials that are wear-resistant, corrosion-resistant, easy to clean, and long-lasting. When the steps are stretched, the non-slip, high-impact pad above the steps will provide you with a strong support foothold, allowing you to get in and out of bed easily and safely. When the steps are retracted, the steps fit into the bumper. Completely convenient for you, providing you with long-term stability and superior performance.. Easy installBecause the truck's bumper and chassis are very high off the ground, getting in and out of the truck can be very troublesome and dangerous. Our bed step Installation is relatively easy until it becomes time to mount the assembled arm to the frame. It is recommended that you purchase a bumper step to solve the problem.. AttentionWe sincerely appreciate the purchase of our 2012-2023 Tacoma bed step.If product has any quality issues, you can request to send a new product, we value your shopping experience..

EASY TO USE Slip this Heavy-Duty Truck Step over your vehicle tire, then reach your roof rack, engine bay, truck box, lumber rack, luggage, and bike without overreaching. VERSATILE The universal and height-adjustable design means it will fit car tires, truck tires, RV tires, even semi-truck tires we tested it, it fits perfectly with a cross width of 13 inches or less at the tread. SAFETY The open design lets mud, slush, and debris pass through and the metal cheese grater surface with anti-slip tape strips offer incredible grip in the best and worst conditions. EASY STORAGE The folding design makes it easy to stow behind a seat, in a truck box, or RV storage bin. SIZE AND CAPACITY Platform is 8-34 inches x 21-34 inches with a 300-pound weight capacity. Great for washing and waxing, loading roof racks, engine service and more. Fits any diameter tire up to 12 deep. Folds flat for compact storage. 300 pound capacity.

Universal FitExtend up to 42 inches,suitable for all trucks with a height of 34 to 42 inches from the ground ,make it to getting into your trucks like a breeze. Easy Installation Only need a 516 or 8 mm Nut Driver Drill Attachment and a 38 or 10 mm wrench with the Assembly Instruction, it is foolproof for you to install. Anti-slip DesignWith aluminum step grip plates, the friction is greatly strengthened. It won't slip even in rainy days. Rubber ladder feet make a solid connection with the ground and two more for you to replace. Sturdy and Durable Made of galvanized steel and load capacity is 300 lbs. Electroplated surface is not be prone to getting rust. Package Include1 x Tailgate Ladder, 1 x Self-drilling hex screws kit, 2 x Tie Down Strap, 1 x Assembly Instruction.2 Years Warranty Honored by Nilight.

Fit for almost all pickup trucks models, such as F150, RAM 1500, Tacoma, etc. The length of the 40-inch ladder can be extended by about 2 inches for use as a 42-inch ladder Only suitable for the vehicles that the height from the tail box to the ground is no more than 42 inch and the tailgate width is not less than 51-inch, max load capacity is 600 lbs.. Made of high-quality metal steel with weatherproof powder coating, super load bearing, anticorrosive and rustproof, significant prevention of surface oxidation or scratch, it is a great item for you to upgrade your vehicle. This is a upgrade version of the original tailgate ladder which add a 50CM long armrest to provide a sturdy support when we go up and down the ladders. The ladder is designed with wide pedals, sturdy steel frame, non-slip rubber feet and metal crossbars provide safety and support when you stand, work and complete tasks, and greatly increase your sense of security. Easy Installation. The base has been predrilled at the installation points that need to be fixed with screws. After installing the pickup truck trunk to climb the ladder, no need to worry about the danger of bumping and jumping. It has special lock device, after use, the ladder can be well-locked to the tailgate. Package include 1 set of 42 pickup truck tailgate ladder with all mount hardware Notice Drill is needed during installation.

FITMENT Fits 1999 - 2016 Ford F-250F-350F-450 Super Duty. STRONG RUGGED Engineered to support loads up to 300 lbs. MAINTENANCE-FREE Self-lubricating bushings for all-weather performance. HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS Precision stainless steel pivot pins for rock solid stability. WARRANTY AMP Research stands behind its products with a hassle-free, comprehensive 5-year60,000 mile warranty.. INSTALLATION Includes all hardware necessary for installation. Product comes with easy to understand vehicle specific installation instructions. Be sure to read and precisely follow the provided instructions when installing..

FITMENT Fits 2015 - 2020 Ford F-150. STRONG RUGGED Engineered to support loads up to 300 lbs. MAINTENANCE-FREE Self-lubricating bushings for all-weather performance. HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS Precision stainless steel pivot pins for rock solid stability. WARRANTY AMP Research stands behind its products with a hassle-free, comprehensive 5-year60,000 mile warranty.. INSTALLATION Includes all hardware necessary for installation. Product comes with easy to understand vehicle specific installation instructions. Be sure to read and precisely follow the provided instructions when installing..

FITMENT Fits 2009 - 2014 Ford F-150. STRONG RUGGED Engineered to support loads up to 300 lbs. MAINTENANCE-FREE Self-lubricating bushings for all-weather performance. HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS Precision stainless steel pivot pins for rock solid stability. WARRANTY AMP Research stands behind its products with a hassle-free, comprehensive 5-year60,000 mile warranty.. INSTALLATION Includes all hardware necessary for installation. Product comes with easy to understand vehicle specific installation instructions. Be sure to read and precisely follow the provided instructions when installing..

Fits most trucks with tailgate heights ranging from 28 to 42, providing a nearly universal fit for pick-up truck owners.. Deploys in just a couple of seconds, making it easy to use and saving you time and effort.. Significantly reduces the physical strain on your body as you enter and exit your truck bed, making it an excellent choice for those with back, knee or mobility issues.. Heavy-duty construction ensures exceptional durability, giving you peace of mind knowing that your ladder can handle heavy use. Folds neatly against the tailgate and stays out of the way of your valuable cargo space when not in use, maximizing the space in your truck bed.. This part will not work with Dodge Ram Box, Chevrolet Avalanche or Cadillac Escalade Trucks. We do not support installation on these vehicles..

Replace Part Number7531201A. Compatibility with Rear Retractable Bumper Bed Step Fit for 2015 2016 2017 2018 2019 2020 Ford f150 Single Exhaust Vehicle. Features Made of High Quality Aluminum material, Wear-Resistant, Corrosion-Resistant, Easy to Clean and Long service Life. Safe to stand even on mud, snow or ice.. Reliable Performance This retractable bumper truck tailgate step is made of light and high-strength aluminum alloy die-casting structure and glass reinforced nylon. It is safe and stable, easy to transport up and down, and suitable for upper and lower tailgates. Meanwhile, the rear bed step pad with patterned anti-skid and glass fiber reinforced composite materials makes the tailgate pedal convenient and safe. Featuring the above structure, our tailgate step will not disappoint you.. 1 year warranty.100 tested by the factory, perfect match with the original car, can be installed directly, do not worry about installation problems, comes with instructions.

Replace Part Number82215289AH 82215289AG. Rear Retractable Bumper Bed Step Compatible with Ram 1500 2019-2022 Double Exhaust Vehicle. The function of the rear retractable bumper pedal The bumper and chassis of the truck are very high off the ground, and getting on and off the car will be very troublesome and dangerous. The use of the rear retractable bumper pedal can help you solve this trouble. Features Made of High Quality Aluminum material, Wear-Resistant, Corrosion-Resistant, Easy to Clean and Long service Life. Safe to stand even on mud, snow or ice.. 1 year warranty.100 tested by the factory, perfect match with the original car, can be installed directly, do not worry about installation problems, comes with instructions.

Provides easy, stair-step access to truck bed with 6 drop and 300 pound load capacity. Spring-loaded mechanism tucks step under rear bumper for ground clearance and hands-free drop down. Maintenance-free aluminum and stainless steel construction with 3-year36,000 mile warranty. No drill installation to frame for solid support installs in about 10 minutes. Drops down 6 inches from rear bumper.

REPLACE PART NUMBER82215289AG, 82215289, 82215289AB , 82215289AC, 82215289AD, 82215289AE, 82215289AF. FITMENTThis Retractable Bumper Bed Step is compatible with Ram 1500 DT New Body Style Dual Exhaust Vehicles. Year 2019-2022.. EASY INSTALLATIONA no-drill installation provides you an easier and safer way to load or unload your cargo. When it is not usesd, it can be retracted to be matched with the bumper.. FEATUREEnhanced aluminum material improves wear-resistant and corrosion-resistant condition. It is safer to step on this pedal for the bumper and chassis of the truck are very high off the ground. It is also easy to clean for more durable use.. SERVICEIf you have any troubles, please feel free to contact us. We will reply within 24 hours. Thanks for your support..

Country Of Origin United States. Package Weight 1.429 Kilograms. Product Type Auto Accessory. Package Dimensions 6.502 Cms L X 30.302 Cms W X 33.909 Cms H.