Important note This cable has two male plugs one-quarter inch TRS male and XLR male it does not connect to microphones, which require an XLR female port for mic use, search XLR female to male designed for balanced line-level output to monitor input only. Heavy-duty 22 AWG conductor Uses oxygen-free copper for lower resistance and cleaner balanced signal transmission from audio interface to studio monitor thicker gauge reduces signal loss compared to standard 24 AWG cables. Compatibility check before buying Requires a source device with one-quarter inch TRS outputs and a destination device with XLR male inputs compatible with Focusrite Scarlett 2i2, KRK Rokit, Yamaha HS series, and JBL 305P MkII. Dual shielding construction Aluminum foil layer plus ninety-eight point five percent OFC braided copper spiral eliminates EMI and RFI interference three-conductor balanced design cancels common-mode noise for clean audio in studio, stage, or home recording environments. Two-pack for complete stereo setup Each cable carries one mono balanced channel connect cable one from left interface output to left monitor XLR input and cable two from right output to right monitor both cables required for full stereo playback. Color-coded connector rings for easy channel identification One cable features a black ring and the other a red ring instantly identify left and right channels without tracing cables behind equipment or rack. Built for long-term use Nylon braided jacket and twenty-four karat gold-plated connectors withstand over fifteen thousand bends without loss of flexibility or signal performance backed by a three-year manufacturer warranty covering defects in materials and workmanship also available in ten-foot and fifteen-foot lengths. 3-YEAR WARRANTY AND MORE LENGTHS 3-year manufacturer warranty covers defects in materials and workmanship also available in 10ft and 15ft for larger studio rooms or live sound setups needing more reach between mixer, interface, and powered speaker.

This Balanced XLR Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.. High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.. The XLR connector is a high quality metal shielded type with positive locking into the microphone The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability.. XLR pin 1 is connected to the 14 plug sleeve, XLR pin 2 is connected to the 14 plug tip, XLR pin 3 is connected to the 14 plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

Function DesignDISINO Dual 14 inch to XLR Male Y Splitter Cable is perfect plugged into a stereo 14 inputoutput to create an XLR male connection, it can be used in both directions. The XLR signal is simply split across the 14 connectors. Suitable for splitting or combining audio signals, is ideal for solving a number of audio problems.it can be used to improve connectivity between equipment such as amps, mixers and microphones.. Super CompatibilityXLR to 2x 6.35mm cable is is perfect for connecting microphones with 14 inch jack to DV cameras, camcorders, or other professional audio equipments with XLR connector. Suitable for mic, mixer, amplifier, sound card, KTV, home theater and other environments etc.. Excellent Sound24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer.Multiple metal-wound shield to effectively isolate electromagnetic interference, no noise and current to restore original sound quality.It splits closer to the 6.35mm ends, the distance to the split point is 19.6 inchs50 cm .This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.. Professional Quality22AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, No hum, no noise, crystal clear music. High quality noise free performance,great choice for music lover, It's especially great for studio or live performances.. Incredible DurabilityHeavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable..

These 14 Stereo to XLR cables are designed to split a 6.35mm 14 inch balanced stereo signal into two unbalanced mono XLR signals left and right channels.. Sturdy metal Housing XLR Connector with internal strain relief for rugged reliability, 20 AWG Oxygen-Free Copper OFC conductor for enhanced signal clarity.. Heavy Duty Gold-plated 6.35mm connector resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.. Copper braided shielding provides maximum cancellation of hum and noise, Fully molded and shielded to prevent EMIRFI interference.. These cables are wired so the Ring Right Channel on the 6.35mm TRS jack is wired to the Red XLR..

Super Compatibility Unbalanced 3.5mm to XLR Male Mic Cable,Connect a smartphone with headphone jack to XLR input Connect a tablet using an instrument App into a mixing console for a performance. connects an iPhone, iPod, MP3 player, tablet, laptop, voice recorder or any 3.5mm audio output to a mixing console or powered speakers.. Signal TransmissionXLR to 3.5mm Mini jack cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is a Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most balanced applications.. Professional QualityXLR male connector has molded strain relief to support the weight of the cable 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.. Excellent Sound20 AWG 4N Oxygen Free Copper, High Density Shielding and Al-foil Shielded to Prevent EMIRFI Interference ensuring the highest quality audio transfer without static, or popping.and provide maximum conductivity and signal clarity.great choice for music lover.. Incredible DurabilityHeavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable..

Balanced XLR female to 14-inch TRS adapter converts an XLR male output to a balanced 14-inch outputPackage included 4 pack XLR female to 14 TRS stereo male adapter.. Female XLR to 14 adapter,Connection A 3-Pin XLR Female Connecter Connection B 14 TRS Plug.. Pro-grade performance delivers pristine sound with this male 14 to XLR adapter.Great for mixers, microphones, amplifiers, EQ, rack gear, keyboards, guitars, electric piano, electric drums, etc.. Male 14 inch to XLR adapter features robust construction in a rugged metal housing, Stable, Durable, and Flexible, work perfectly.. The international standard of Female XLR to 14 inch audio connectors, reliable transmission of audio frequencies, all-metal construction ensure loss-less transmission signal. Protective Shielding for RF and EMI noise elimination..

4-Channel Shielded Audio Cable This Proreck Audio cable has 4 channels, allowing you to transmit multiple audio signals at the same time. The added shielding helps block electromagnetic EMI and radio frequency interference RFI, ensuring clearer sound with minimal noise.. Faster And Better Sound Quality The Proreck Audio cable features a copper core, providing excellent conductivity and ensuring superior signal transmission with minimal loss. This makes it a reliable choice for studio recordings, live sound setups, and other demanding audio applications.. Number And Color Mark Each cable is labeled with matching numbers and colors, enabling quick and accurate connections to your devices. This makes it an excellent choice for professional audio setups, surround sound systems, or multi-track recording.. Connection Stability Compared to wireless transmission, audio cables offer a more stable and reliable connection, preventing audio signal interruptions or delays.. Wide Compatibility This 4 channel 6ft snake cable features standard-sized TRS to XLR male connectors, making it compatible with a wide range of devices such as headphones, speakers, mixers, and instruments. It is versatile in application..

Nature Sound Smithok xlr to 14 adapter uses shielded 24 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.. PROFESSIONAL Balanced 14 to XLR Cable This 6.35mm TRS to XLR Male Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. Balanced XLR to 14 cable is perfect for interconnecting many types of audio equipment with XLR connector and 14 inch TRS jack.. Robust Construction Standard user-friendly, This balanced 14inch to 3pin XLR Male cable is 6.6ft long. The wire is nylon braided, it's strong and heavy duty. 14inch XLR plug is 24k gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.. High Quality Materials Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.3mm0.25 inch, Top quality and made material, Polyethylene insulation improves high-frequency response, strong, flexible. The 14 to XLR cable has molded strain relief to support the weight of a device. This male xlr to 14 cable use high quality material of nylon braided cable, which is more soft, durable and beautiful. Easier to clean. Provide longer service life than normal cables.. What You Get 2 packs 14 to xlr male 6.6 feet. Smithok is a professional manufacturer focusing on audio cables, Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed., so please feel free to contact us if you have any problem about this xlr to 6.356.5mm microphone cable..

Widely Compatibility and Multiple Use Smbiutoofe XLR to 14 designed to convert a balanced XLR output to a 14 TRS input, highly compatible with mixers, power amplifier, stereo system, speakershome karaoke system, sound card and other types of audio equipment with XLR connector and 14 inch TRS jack.. High-Fidelity Sound Quality This XLR male to 14 uses 24K Gold-plated 3 pins and 6.35mm connector, which can eliminate signal loss and static noise, improve the signal transmission and durability Zinc alloy material shell blocks any interference which prevents the loss of sound quality.. Noise Cancellation Smbiutoofe 14 to XLR use 24AWG oxygen-free copper OFC conductors and multi-layer shielding structure, built with double aluminum, foil shielding and copper shielding for high-quality sound and minimal signal loss, ensuring clear, distortion-free audio.. Flexible Durable Nylon Braided Our 14 TRS to XLR male use high-density nylon braided outer layer over the import PVC Jacket, improve the flexibility and durability. This XLR to TRS cable can stand 100,000 times bends without reducing the flexibility. 10 times more durable than normal PVC cable. Extend the service life of this cable.. What You Get Balanced XLR to 14 cable 10ft 2packs, easy to store and resistant to dirt. Tangled free..

Model SAXT-4x5M. Channels 4 each TRS Male 14 Male XLR connections. Length 5 feet from tip to tip. Conductor 22 ga high purity copper. Color coded and numerically labeled.

SHORT 1FT PATCH SOLUTION At just 1 foot 30cm, these cables are the perfect length for patching adjacent studio gear and organizing audio racks. Eliminate the spaghetti mess of long cords behind your deskideal for clean, professional cable management.. PRO BALANCED AUDIO Designed to connect gear with balanced 6.35mm 14 TRS outputs to XLR inputs. The balanced wiring provides crisp, uncolored signal for recording and live sound.. LOW INTERFERENCE PROTECTION Features high-purity conductor wiring and internal shielding to protect against EMI and RFI. Enjoy transparent, high-fidelity sound transmission without, even in busy studio environments.. RUGGED DURABILITY FLEXIBILITY Built with a heavy-duty PVC jacket and reinforced strain relief. Designed to withstand daily use.. SECURE CONNECTION 2-PACK VALUE Precision-molded 3-pin XLR male and 14 inch TRS connectors provide a snug, lock-in fit. Connvenient 2-Pack for home studios, professional stages, and audio-visual setups..

Wide Compatiblity XLR to Dual 6.35mm 14'' TRS Male Balanced Y Splitter Cable, it's a biditional cable, 14 TRS Male can input or output, by connecting to the XLR, designed to split the XLR into two 14 TRS balanced audio cable, suitable for microphone, mixing board, amplifier, sound card, KTV, home audio theater and other devices. Sound Quality Gold Plated Plug and Joints, provides high sound quality with noiseless Interference, no hum, crystal clear music it's more sensitive and more steady connection. Signal Transferring The High Coverage of OFC conductor, covered with polyethylene insulation, inner with the tensile cotton yarn, aluminum foil shielding, and metal shielding wrap eliminate interference the cable is with the dual shielding by the foil and conductivity pvc, which ensures the maximum cancellation of noise undisturbed by external signals, provides pristine sound. Durability Durable Molding Type Cable SR, flexible and strong toughness, environmentally friendly pvc jacket, and high quality metal housing, which makes a longer service life. Quality Assurance Manufacting process is under cotrol from the incoming check, in-process testing and outgoing audit toa ensure the product quality to satisfy your purchase.

Professional Audio Quality Our XLR microphone cable is expertly crafted for use with professional microphones and recording equipment. Featuring high-quality 3-pin XLR connectors, this XLR cord ensures exceptional sound quality, making it ideal for studio and live recording environments. Convenient 2-Pack Bundle This value pack includes two XLR to XLR cables, offering spare or replacement options for different audio setups. Whether for studio microphones or various audio systems, these XLR microphone cables provide the flexibility and convenience you need. Enhanced Sound Clarity Constructed with oxygen-free copper OFC conductors, our XLR mic cable delivers pristine sound. The balanced design, combined with a soft PVC jacket, ensures minimal interference and maximum audio fidelity. Superior Shielding Durability The XLR male to female cables feature copper braided shielding for maximum noise cancellation, and heavy-duty metal connectors with molded strain relief for increased durability. The robust construction ensures long-lasting performance and reliability. Versatile Compatibility Compatible with a wide range of professional audio equipment, these microphone cords are suitable for connecting shotguns microphones, mixing boards, preamps, speaker systems, and stage lighting with 3-pin XLR connectors, making them a versatile choice for various audio applications.

Professional-Grade XLR to 14 Cable Connects mixers, powered speakers, amplifiers, and recording equipment, ideal for professional studio, live sound, and stage use. Bi-Directional Design 14 to XLR Male Adapter with plug-and-play setup, no drivers required, making it versatile for instruments and audio devices. High Audio Quality TRS cable designed with dual-channel TRS to XLR balanced connection maintains audio quality, reducing interference for long-distance transmission. Anti-Oxidation Performance XLR Male to 14 Inch Cord features copper conductors, tin-plated pins, and nickel-plated connectors for secure signal stability and anti-oxidation performance. Superior Durability Mic Cable XLR to 14 Inch Male built with PVC jacket and SR strain relief to minimize stress, prevent wear, and ensure durability in daily use.

cable pighog cable instrument cable. 25 Ft. Length. Balanced Cable.

Model Number SAXT-16x10M. 16 Channels. 14 TRS Male to XLR Male. Length 10 Feet. Brand New with One Year Warranty.

Nature Sound Smithok xlr to 14 adapter uses shielded 23 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.. PROFESSIONAL Balanced 14 to XLR Cable This 6.35mm TRS to XLR Male Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. Balanced XLR to 14 cable is perfect for interconnecting many types of audio equipment with XLR connector and 14 inch TRS jack.. Robust Construction Standard user-friendly, This balanced 14inch to 3pin XLR Male cable is 10ft long. The wire is nylon braided, it's strong and heavy duty. 14inch XLR plug is 24k gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.. High Quality Materials Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.3mm0.25 inch, Top quality and made material, Polyethylene insulation improves high-frequency response, strong, flexible. The 14 to XLR cable has molded strain relief to support the weight of a device. This male xlr to 14 cable use high quality material of nylon braided cable, which is more soft, durable and beautiful. Easier to clean. Provide longer service life than normal cables.. What You Get One 14 to xlr male 10 feet cable. Smithok is a professional manufacturer focusing on audio cables, Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed., so please feel free to contact us if you have any problem about this xlr to 6.356.5mm microphone cable..

High-Quality Conductor The cable uses 20 AWG 6N silver-plated copper conductors, combined with a tin-plated copper braided shielding with a coverage rate of over 95. This ensures exceptional signal clarity, minimal interference, and optimal audio transmission.. Heavy-Duty Zinc Alloy Housing The connectors are housed in heavy-duty zinc alloy casing, which provides excellent protection and durability, making the cable perfect for both professional and home studio setups.. Reliable Connections The cable features high-quality 14 TRS right angle to XLR male connectors made of gold-plated brass. These connectors offer reliable contact and corrosion resistance, ensuring a stable and uninterrupted audio signal.. Flexible and Durable The HUALEU micphone cable is constructed with a flexible rubber jacket that provides maximum flexibility and durability, ensuring a long-lasting performance.. Compact and Convenient The cable has an outer diameter of 6mm, making it lightweight and easy to manage. 1-foot long 14 TRS right angle to XLR male connectors, allowing for convenient connection in various audio setups..

XLR to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. All equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier is available. Heavy Duty Flexible PVC Jacket to Protect Your Cable, the cable outer diameter 6.0mm0.24 inch to ensure the high durability. Copper braid is thick enough and elastic.Cotton Yarn wrap to reduce noise, cable is made by environment-friendly material, Polyethylene insulation improves high frequency response, strong, flexible and durable.. XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable, is to make sure excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is to greatly improve noise suppression, reducing noise by 95. Pure Copper and Plated Conductors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. Packaging in the Box is 2 Cables, with different colors to make you easily to install onto your device for friendly identification. And there is different size cable in our store for your purchase to make choice as per your needings.

Excellent Sound Quality Stable TransmissionThis 6.6FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Wide Compatibility The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. High Durability Flexibility Yumiwoow XLR to 6.35mm cable is made of softNylon braided heavy duty jacket to ensure flexibility and durability, XLR connector with self-locking design has been tested plug and pull over 15,000 times, It is heavy, resistant to deformation and rust, and improves signal performance without worrying about signal deterioration over time.. Heavy Duty 24K gold-plated XLR and 6.35mm Connectors it could eliminate signal loss and static noise, provide durability and improve signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Yumiwoow offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Model Number SATRXL-M2 Orange 6 Pack. Metal 3 Pin XLR Male to TRS 14. Length 2 Feet for each cable. Heavy Duty Flexible Rubber Jacket. Brand New with One Year Warranty.

Wide CompatibilityXLR Male to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. Excellent Sound QualityMale XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95. Process AssurancePure Copper and Plated Conductors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. Flexible and DurableHeavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable.. In the Box2 pack, 6.6 FT XLR Male to 14 TRS Mono Jack Microphone Cable with Black and white grid layer.

Balanced 14 to XLR Cable This 6.35mm TRS to XLR male cable is designed to convert a balanced 14 TRS output to a balanced XLR input. Typically used with active speakers, it transfers the audio signal from the mixing console to the speakers. The balanced XLR to 14-inch cable is ideal for connecting a variety of audio equipment through the XLR connector to the 14-inch TRS jack.. DOUBLE-SHIELDED The 14 inch TRS to XLR male balanced mic cable constructed with 20 AWG OFC conductors, double-layers of shielding high density bare copper braid shielded aluminium foil, so as to reducing shaking noise, trampling noise and electrostatic sound interference. No humming, no noise.. Professional Connector 24K gold-plated 6.35mm jack connectors provide excellent conductivity, reducing resistance, audio signal attenuation and distortion. Heavy Duty Metal Connector made of heavy alloy with molded stress relief and frosted texture. The heavy-duty metal shell blocks out interference and reduces loss of sound quality.. PREMIUM SOUND QUALITY This mono plug adapter seamlessly transmits audio for clear sound quality, while ensuring reliability and reduced signal loss.Maintains consistent sound output over time. A great choice for music lovers.. COMPATIBLE FLEXIBLE Quarter inch TRS male to XLR male patch cable compatible with equipment with 3-pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier..

Excellent Sound Quality Stable TransmissionThis 10FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Wide Compatibility The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. High Durability Flexibility Yumiwoow XLR to 6.35mm cable is made of softNylon braided heavy duty jacket to ensure flexibility and durability, XLR connector with self-locking design has been tested plug and pull over 15,000 times, It is heavy, resistant to deformation and rust, and improves signal performance without worrying about signal deterioration over time.. Heavy Duty 24K gold-plated XLR and 6.35mm Connectors it could eliminate signal loss and static noise, provide durability and improve signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Yumiwoow offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Tisino Balanced 14 to XLR Male Cable, This TRS to XLR Cable is designed to convert a balanced 14 TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. XLR pin 1 is connected to the 14 plug sleeve, XLR pin 2 is connected to the 14 plug tip, XLR pin 3 is connected to the 14 plug ring.. This Male XLR to 14 cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.. With Heavy Duty 24K Gold-plated XLR and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.. Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Despite multiple layers of shielding and insulation put in place for maximum noise isolation, this patch cable's construction remains very flexible, doesn't get tangled, and is easy to coil at the end of your gig. It comes with a re-usable velcro strap to keep it organized and tight when not in use..

Excellent Sound Quality Stable TransmissionThis 3.3FT TRS 6.35mm 14 Inch to XLR 3 Pin Male Balanced Interconnect Audio Cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity.. Wide Compatibility The XLR to Quarter Inch cable is compatible with the equipment with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Sound box, Power Amplifier, frequency divider, voltage limiter, digital decoder, Audio Sound Console and Stereo System and more.. High Durability Flexibility Yumiwoow XLR to 6.35mm cable is made of softNylon braided heavy duty jacket to ensure flexibility and durability, XLR connector with self-locking design has been tested plug and pull over 15,000 times, It is heavy, resistant to deformation and rust, and improves signal performance without worrying about signal deterioration over time.. Heavy Duty 24K gold-plated XLR and 6.35mm Connectors it could eliminate signal loss and static noise, provide durability and improve signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. the outer diameter of the cable is 6.0mm0.24 inch, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, strong, flexible and durable.. Yumiwoow offer 12 months warranty for this Jack 6.35mm Male to XLR Male Patch Cord. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Perfect Compatibility This XLR to 14 Inch 6.35mm Cable is designed to convert a balanced XLR output to a 14 TRS input, which is suitable for connecting many types of audio equipment with XLR connector and 14 inch TRS jack. This xlr to trs is usually used for active speakers as a speaker leads, carrying the audio signal from mixer to speaker. Available devices Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver ,etc.. 24AWG OFC Design Use 24AWG OFC conductor with double shielding, foil shielding and metal braid shield to provide prinstine sound, noise shielding, no noise.. Nature Sound Bezokable xlr to 14 adapter use gold-plated 6.356.5mm adapters and silver-plated 3-pins to provide hi-fi sound quality. We also add a Anti-jamming magnetic ring which can anti-interference and filtering functions, ensures the stable signal transmission without loss, provide Hi-Fi sound quality.. Soft Durable Nylon Braided Cable This male xlr to 14 cable use high quality material of nylon braided cable, which is more soft, durable and beautiful. Easier to clean. Provide longer service life than normal cables.. What You Get 2 packs 14 to xlr male 10feet. Bezokabel is a professional manufacturer focusing on cables, all of our products has after-sale service, so please feel free to contact us if you have any problem about this xlr to 6.356.5mm microphone cable..

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 14 TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.. High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.. The XLR connector is a high quality metal shielded type with positive locking into the microphone The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability.. XLR pin 1 is connected to the 14 plug sleeve, XLR pin 2 is connected to the 14 plug tip, XLR pin 3 is connected to the 14 plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

XLR male to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. male XLR to 14 Inch 6.35mm TRS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95. 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. XLR male to 14 6.35mm TRS Mono Jack Microphone Cable, compatible with equipments with 3-pin XLR connectors and 6.35mm socket such, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier etc.. Heavy Duty Flexible PVCJacket Protect Your Cable, the outer diameter of the cable is 6.0mm0.24 inch,high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable..

Specification This balanced 14inch to 3pin XLR Male cable is 3.3FT long. The wire is nylon braided, it's strong and heavy duty. 14inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.. Noise Free This TRS to XLR male cable is full covered with spiral OFCoxygen free copper inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI.. Not Use for Guitar This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 14 instrument jack, but not XLR jack. 14inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc.. Package Items The package include two 6.35mm to XLR male cable, each cable is 3.3 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake.. 2-year Warranty Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed..

Hi-Fi Sound Quality - This xlr to 14 cables use 24AWG oxygen-free copper conductors, copper braid, and double shielding Foil shielding and Copper braided shielding, maximizing resistance to external interference, providing maximum conductivity and signal clarity. Premium Durability - EBXYA 14 TRS to XLR is more flexible and durable than other XLR cables. Our XLR to TRS Cable with PVC sheath is easy to use and store. XLR to 14 cable can withstand bend tests of 10000 times, is 10 times durable more than normal, and longer life. Professional 14 to XLR Cable - EBXYA XLR Male to 14'' TRS is made of a self-locking design that is easy to plug and unplug. XLR cable adopts heavy-duty metal connectors and gold-plated pins design, helping to ensure a higher quality of sound. Wide Compatibility - Balanced XLR Male to 14 Inch cable designed for XLR female connectors to equipment with a 14 inch TRS jack, widely used as signal cables at studio recording, amplifiers, mixers, guitars, and so on. Enjoy music life at any time. Worry-Free Service - This package has xlr male to 14'' 3ft 2 Pack, We strive to provide customers with satisfactory products and services, if you have any questions about our products, please feel free to contact us, and we will reply to you ASAP.

Ultra Durable Flexible Design 3.3FT XLR to 6.35mm plug uses gold plated, good electrical conductivity, oxidation resistance and wear resistance, plug and pull tests to 15000 times Heavy, No deformation rust.. Stable Transmission High strength aluminum alloy die-cast housing. Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable, provides maximum cancellation of hum and noise.. Wide Compatibility XLR Male to 14 inch 6.35mm TRS cable compatible with equipments with 3 pin XLR connectors and 6.35mm socket such as Mixer, Amplifier, Guitar, Soundbox, Power Amplifier.. Usage Scenario Twozoh XLR to TRS 6.35mm Cable. Widely used as signal cables at studio recording, live house, professional sound reinforcement, home theater and other environment.. Quality Assurance Twozoh offer 12 months warranty for this cable. Please feel free to contact us for a replacement if it has any quality issue within warranty..

Gold-Plated Connectors Dual Shielding Featuring corrosion-resistant gold plating on both TRS and XLR connectors, this cable ensures optimal conductivity for high-fidelity audio transmission. The dual-layer shielding combines aluminum foil and braided copper to block 90 of electromagnetic interference EMI from Wi-Fi routers, LED lights, or USB hubs. Gold contacts also resist oxidation, maintaining signal clarity even after 10,000 plugunplug cycles tested to IEC 60512-23 standards.. At just 3.3FT long, this cable eliminates excess slack in tight spaces like podcasting desks, rack-mounted gear, or portable recording kits. Its streamlined length prevents tangling and reduces ground loop risks common in cluttered setups. Ideal for routing audio from a Universal Audio Apollo Twin interface directly to a Neve-style preamp, or linking a headphone amp to a microphones XLR input.. Built with zinc alloy XLR housings and a reinforced nylon inner core, this cable withstands the rigors of daily studio use or on-location recording. The strain relief collars are molded to IEC 60601 stress-test standards, preventing wire fractures even when stepped on or yanked accidentally. Its ability to survive tour buses, coffee shop sessions, or frequent setup changes without performance degradation.. Plug-and-Play Studio Live Compatibility Designed for universal pro audio compatibility, this cable seamlessly connects Audio interfaces e.g., PreSonus Studio 24c to XLR mic preamps. SynthesizersDI boxes to recording consoles e.g., Behringer X32. Headphone outputs to broadcast mixers for latency-free monitoring.. Podcast Studio-Centric Applications Home Studio Connect a guitar modeler e.g., Kemper Profiler to an XLR-equipped audio interface for silent recording. PodcastingField Recording Pair with portable recorders and XLR mics in minimalist mobile rigs. Live Streams Route gamevoice audio from a PCs TRS output to a GoXLR mixer via XLR for noise-free broadcasting..

Professional balanced transmission, rejecting noise interference Features a standard balanced 14 6.35mm TRS to dual XLR male connector design, effectively suppressing electromagnetic interference during long-distance transmission to ensure clean, lossless audio signals for studio recording and live performances.. Stereo Splitter for Flexible Dual Connections Splits a single stereo TRS output from a mixer or audio interface into two independent XLR mono signals. Ideal for routing stereo outputs from DJ gear or players to leftright channel amplifiers or PA speakers, enabling rapid stereo system setup.. Wide compatibility with professional gear, plug-and-play Works with any device featuring balanced TRS outputs e.g., mixer main outputs, audio interface line outputs. Dual XLR male connectors on the other end easily connect to XLR-input speakers, amplifiers, or recorders without additional adapters.. Built for live use with high-durability materials Thickened shielding and pure copper core wires ensure stable signal transmission. Silver-plated connectors resist oxidation and withstand frequent pluggingunplugging, complemented by a metal housing. Ideal for high-frequency use scenarios like stage touring and fixed installations, delivering lasting reliability.. Multi-scenario application, one-stop solution for signal distribution Perfectly suited for live sound reinforcement, studio monitoring, multi-track recording, live streaming audio routing, and more. For example Send one channel from the mixer's main output to the main PA speakers while simultaneously routing another channel to recording equipment, enabling simultaneous performance and recording..

Support data and audio signal transmission -Dorongtou XLR to 14 inches 6.35 mm TS single -point microphone cable with excellent clarity andhigh noise and radio frequency interference elimination. 3 Nuclear XLR cable design is famous for its significant improvement of noise reduction effect, reducing noise by 95. Balanced Shielded Wire-XLR cable 3-core outer braided oxygen-free copper shield and aluminum shield. Male XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable,, gold-plated connectors. Ensure the smooth transmission of data and audio signals.. High Quality-These cables use thick wires, gold-plated connectors and solid connector shells. XLR Male XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable, continue our tradition of providing the highest quality cables at the best prices.. Multi-purpose-XLR male to 14 inch 6.35mm TS mono jack microphone cable, suitable for professional stage lighting instruments, moving head lights, par light spotlights, and various types of XLR input and output Musical instrument. Such as microphone, effector, mixer, equalizer, DMX LED, electronic organ, amplifier, electric guitar. Suitable for concert halls, schools, churches, studio lighting and recording, and many other professional audio settings..

Support data and audio signal transmission-Male XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95. Balanced Shielded Wire-XLR cable 3-core outer braided oxygen-free copper shield and aluminum shield. Male XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable,, gold-plated connectors. Ensure the smooth transmission of data and audio signals.. High Quality-These cables use thick wires, gold-plated connectors and solid connector shells. XLR Male XLR to 14 Inch 6.35mm TS Mono Jack Microphone Cable, continue our tradition of providing the highest quality cables at the best prices.. Multi-purpose-XLR male to 14 inch 6.35mm TS mono jack microphone cable, suitable for professional stage lighting instruments, moving head lights, par light spotlights, and various types of XLR input and output Musical instrument. Such as microphone, effector, mixer, equalizer, DMX LED, electronic organ, amplifier, electric guitar. Suitable for concert halls, schools, churches, studio lighting and recording, and many other professional audio settings..

with Gold Contact 14 TRS XLR Female Connects. Neglex Studio Quad Cable. Audio Cable. 6' Long.

High-Quality Conductor The cable features a 20 AWG 6N silver-plated copper conductor with over 95 coverage of tin-plated copper braided shielding, delivering excellent signal transmission and minimizing interference.. XLR cable is perfect for interconnecting many types of audio equipment with XLR connector and 14 inch TRS jack. Right-angle design makes the cable more flexible and more suitable for wall-mounted equipment. It can also be used in the corner.help reduce strain on the cable during use.. Stereo plug adapter seamlessly transmits stereo audio for high-quality sound, while ensuring reliability and reduced signal loss.. This cable adapter is suitable for various audio devices, including mixers, microphones, electric guitars, and other instruments, providing seamless interface conversion..

PRO GRADE XLR CABLE Professional Series XLR Plugs, designed to connect an audio device with a mini stereo phone output to professional audio gear with XLR inputs. It is ideal for connecting a portable media player, laptop, or similar device to a mixing console. Give you the perfect sound quality. EXCELLENT SOUND 20 AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance.. PROFESSIONAL QUALITY 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. DURABILITY The wire is flexible and Strong toughness, and premium metal housing and durable. 15000 bend lifespan braided nylon exterior make audio cables adding to the durability and tangle free.. WIRING TYPE The TipHot Left Channel on the 3.5mm TRS Plug is wired to the Blue XLR connector, The RingCold Right Channel on the 3.5mm TRS Plug is wired to the Red XLR connector..

Hi-Fi Sound Quality - This XLR to 14 cables use 24AWG oxygen-free copper conductors, copper braid, and double shielding Foil shielding and Copper braided shielding, maximizing resistance to external interference, providing maximum conductivity and signal clarity. Self-locking Connector - EBXYA XLR Male to 14'' TRS is made of a self-locking design that is easy to plug and unplug. XLR cable adopts heavy-duty metal connectors and gold-plated pins design, helping to ensure a higher quality of sound. Premium Durability - EBXYA 14 TRS to XLR is more flexible and durable than other XLR cables. Our XLR to TRS Cable with PVC sheath is easy to use and store. XLR to 14 cable can withstand bend test times, is more durable than normal, and has a longer life. Wide Compatibility - Balanced XLR Male to 14 Inch cable designed for XLR female connectors to equipment with a 14 inch TRS jack, widely used as signal cables at studio recording, amplifiers, mixers, guitars, and so on. Enjoy music life at any time. WORRY-FREE SERVICE - This package has XLR Male to 14'' 10ft 2 Pack, We strive to provide customers with satisfactory products and services, if you have any questions about our products, please feel free to contact us, and we will reply to you ASAP.

Double shielding Strong Anti-interference AbilityXLR cable adopts real 24AWG oxygen free copper conductor, adopts new weaving technology, high quality aluminum foil shielding is adopted, so as to eliminate shaking noise, trampling noise and electrostatic sound interference. It has excellent noise barrier, and Microphone Cable can provide you with high-definition audio transmission.. Durable Flexy Nylon BraidedThe Microphone Cable adopts nylon braid, not only makes the Mic Cable more soft and flexible, also makes you notice it at a glance among many black cables, which is no longer dazzled in many cables.. Heavy Duty Metal ConnectorsThis XLR Microphone Cable is equipped with professional connectors. It is made of heavy alloy and has molded stress relief and frosted texture. It is durable. At the same time, we have undergone a lot of plug-in tests when manufacturing to ensure that each plug can adapt to the standard jack, and the plug-in process is also very easy and neat.. Wide CompatibilityThe connectors are perfectly compatible with equipments with 3-pin XLR such as Microphones, AmplifierMixer, power amplifiers, Recording StudioStudio Harmonizers, Speaker Systems, Patch Bays and Stage Lighting and so on. These XLR microphone cables can be widely used in stage performances, clubs, bar performances, KTV and home recording. There are a variety of lengths for you to choose, suit, single strip, etc. you can choose according to your needs.. Strong Transmissibility Silver plated XLR pins and Nickel plated TRS improves the transmission performance of Mic Cord and ensures the durability and reliability. The advanced configuration enables to be used in harsh environments without any impact..

with Gold Contact 14 TRS XLR Male Connects. Neglex Studio Quad Cable. Audio Cable. 6' Long.

Professional Balanced Audio Cable This HUALEU 14 inch TRS to XLR male cable is engineered to convert a balanced 14-inch TRS output to a balanced XLR input. It is ideal for use as a speaker lead to transmit high-quality audio signals from a mixing console to powered speakers or power amplifiers, ensuring clean and noise-free sound transmission. Superior Shielding for High-Fidelity Sound Constructed with a dual-layer shield of copper and aluminum foil, along with 4N Oxygen-Free Copper OFC conductors, this cable guarantees maximum conductivity and exceptional signal clarity. This advanced construction minimizes electromagnetic interference EMI and radio-frequency interference RFI for pristine, high-fidelity audio reproduction, making it a perfect choice for studios and live performances. Premium Gold and Nickel Connectors Features 24K gold-plated 6.35mm TRS connectors and nickel-plated XLR connectors. The gold plating prevents oxidation, eliminates signal loss and static noise, while the robust nickel-plated connectors provide superior durability and improved signal transmission for reliable, long-term use. Rugged and Flexible Build for Longevity The 14 6.3mm TRS to XLR Male cable is protected by a heavy-duty, flexible rubber jacket with a high-density braided sheath, offering excellent durability and kink resistance. A zinc alloy connector housing effectively blocks external signal interference, and the molded strain relief design supports the weight of your equipment, preventing damage to the cable core from pulling or bending. Optimized Internal Construction The XLR Cable internal polyethylene insulation layer improves high-frequency response, contributing to a wider and more accurate sound range. With a generous outer diameter of 6.0mm 0.24 inches, this XLR Male to 14 TRS cable is built to be both incredibly sturdy and highly flexible, offering the perfect balance for demanding professional environments.

Professional Balanced Connectivity Engineerts to deliver pristine audio transmission between professional equipment with balanced XLR outputs and balanced 14 TRS inputs. Ideal for connecting mixers, audio interfaces, amplifiers, and active subwoofers in studio, stage, and live sound applications.. 90 Angled Design for Space Saving Durability Features 90-degree angled 6.35mm plug, designed to prevent cable strain and accidental disconnections in tight setups. This smart right-angle design enables clean cable management behind gear and significantly extends the cable's lifespan.. Multi-Shielding for Crystal-Clear Audio Utilizes oxygen-free copper conductors combined with advanced aluminum foil and woven copper braid shielding. This dual-layer protection effectively blocks 99.99 of electromagnetic interference, ensuring pure, noise-free, high-fidelity sound reproduction.. Rugged Professional Build Built to withstand rigorous use with heavy-duty metal connectors, 24K gold-plated contacts for superior corrosion resistance, and a flexible yet robust braided jacket. The premium construction, as seen in the vivid red and gold design, ensures reliable performance night after night.. Complete Package with Reliable Support Includes 1 x SOUNDFAM Balanced XLR to 14 TRS Cable, backed by an 18-month worry-free warranty and friendly customer support. We are committed to delivering professional-quality audio solutions that connect your passion to performance..

What's in the Box 1XLR Male to 14 Cable, 1 XLR Female to Female Adapter. Smart Dual-Configuration Value Pack Your package includes an XLR male to 14 cable and an XLR female-to-female adapter, offering two setups in one use the cable alone for XLR male to 14 connections, or attach the adapter to create an XLR female to 14 cable. This smart combination achieves two-cable functionality at a single-cable cost, seamlessly linking microphones,instruments,amplifiers, and audio systemsperfect for musicians, content creators, and home setups needing versatile connectivity without extra expenses.. Kevlar-Reinforced Braided Audio Cable AA AUDIO ACCESSORY is the first brand to integrate Kevlar into audio cables. This innovation significantly enhances the durability of the XLR to 14 cable, allowing it to withstand heavy use and frequent movement. Tested to endure over 150,000 bends, it offers 10 times the lifespan of standard cables without Kevlar reinforcement.. Professional-Grade Connectors This bundle includes an XLR Male to 14 inch cable and an XLR Female to Female adapter, both featuring premium Rean connectors by Neutrik. Renowned for their precision engineering and robust build, these connectors ensure a secure fit without damaging or jamming your audio equipment.. Over 95 Coverage OFC Braided Shield Engineered with a five-layer shielding structure, including a 95 OFC braided copper shield, this XLR to TRS cable delivers exceptional protection against RFI, EMI, and other interference. Whether you're on stage or in the studio, you can count on crystal-clear, noise-free audio transmission.. Enhanced Soldering with Heat Shrink Protection This 6.35mm to XLR cable is crafted with lead-free silver solder and heat shrink tubing, ensuring solid, durable solder joints. This advanced construction minimizes signal loss and guarantees stable, high-quality sound transmission over time.. Wide Compatibility and Versatile Applications Designed for use with mixers, audio interfaces, amplifiers, studio monitors, and more, this XLR Male to 6.35 mm cable bundle is perfect for live performances, studio recording, broadcasting, and even home audio setups. The included XLR Female to Female adapter adds flexibility, making it ideal for extending cables or adapting connections.. Lifetime Warranty Enjoy peace of mind with our lifetime warranty and dedicated customer support team. If you have any questions or concerns, were here to provide you with the best assistance.. Better Performance, Better Prices We use better materials than other common brands on Amazon. We use materials like Rean connectors from Neutrik and Kevlar-reinforced nylon-braided cables to deliver professional-grade performance. Yet, our prices are more competitive than other high-end brands. AA AUDIO ACCESSORY offers you the perfect balance of quality, professionalism, and value..

Made of high purity ofc conductor 14 to XLR Cable use good quality oxygen free copper with shielding ensuring high fidelity sound quality and providing maximum's conductivity and durability. It's especially great for studio or live performances. Double-shielded 6.35mm TRS to XLR Male cable constructed with double-layers of shielding high density bare copper braid shielded aluminium foil minimize signal interference and ensure the transmission stable, provides maximum against electro magnetic interference emi and radio frequency interference rfi. Incredibly durable With a 10000 bend lifespan several times longer than xlr cables,premium metal housing and durable, high purity ofc internally, rohs pvc environmentally friendly materials and nylon braid externally, against scratching and abrasion, prolonging it's service life. Usage Scenario XLR to TRS 6.35mm Cable. Widely used as signal cables at studio recording, live house, professional sound reinforcement, home theater and other environment.. Quality AssurancSZLliyxs is committed to provide consumers with high-quality cables and better after-sale service. All of our cable provide 1-years after-sale service. If you have any problems, please feel free to contact us via Amazon..

2-Pack 6-Feet Gold-Plated 14-Inch TRS Right Angle to XLR Male RecordingStagePatchAudio CablesTwo-pack XLR male to gold-plated 14 inch TRS right angle high quality professional recordingstagepatchaudio cables Total length of each cable including the length of connectors 6 feet. Gold-Plated for Signal Transparency14 TRS connectors gold-plated for signal transparency, durability and dependability. Cables with Pure Oxygen-Free Copper WiresComprising audio signal wires made of pure oxygen-free copper OFC conductors for signal clarity and the audio signal transmission integrity. Protective Connector Metal Housing and Ultra-Soft PVC JacketConfigured with ultra soft flexible PVC jacket and all protective connector metal housing for maximum durability, reliability, easy installation, and dependability. Effective EMI and RFI RejectionConfigured with spiral signal shield made of oxygen-free copper OFC for flexibility and effective EMI and RFI rejection.

2-Pack 1-Foot RecordingStagePatchAudio CablesTwo-pack XLR male to gold-plated 14 inch TRS right angle high quality professional balanced recordingstagepatchaudio cables Total length including the length of connectors 1 foot. Gold-Plated for Signal Transparency14 TRS connectors gold-plated for signal transparency, durability and dependability. Cables with Pure Oxygen-Free Copper WiresComprising audio signal wires made of pure oxygen-free copper OFC conductors for signal clarity and the audio signal transmission integrity. Protective Connector Metal Housing and Ultra-Soft PVC JacketConfigured with ultra soft flexible PVC jacket and all protective connector metal housing for maximum durability, reliability, easy installation, and dependability. Effective EMI and RFI RejectionConfigured with spiral signal shield made of oxygen-free copper OFC for flexibility and effective EMI and RFI rejection.

2-Pack 3-Feet AudioPatchStageRecording CablesTwo-Pack XLR male to gold-plated 14-inch TRS right-angle audiopatchrecordingstage cables Total length of each cable including the length of connectors 3 feet. Gold-Plated for Signal Transparency14-inch TRS connectors gold-plated for signal transparency, durability and dependability. Cables with Pure Oxygen-Free Copper WiresComprising audio signal wires made of pure oxygen-free copper OFC conductors for signal clarity and the audio signal transmission integrity. Protective Connector Metal Housing and Ultra-Soft PVC JacketConfigured with ultra soft flexible PVC jacket and all protective connector metal housing for maximum durability, reliability, easy installation, and dependability. Effective EMI and RFI RejectionConfigured with spiral signal shield made of oxygen-free copper OFC for flexibility and effective EMI and RFI rejection.

6-Feet Gold-Plated 14-Inch TRS Right Angle to XLR Male AudioPatchStageRecording CableGold-plated 14-inch TRS right-angle to XLR male audiopatchrecordingstage cable Total length of each cable including the length of connectors 6 feet. Gold-Plated for Signal Transparency14-inch TRS connector gold-plated for signal transparency, durability and dependability. Cable with Pure Oxygen-Free WiresComprising audio signal wires made of pure oxygen-free copper OFC conductors for signal clarity and the audio signal transmission integrity. Protective Connector Metal Housing and Ultra-Soft PVC JacketConfigured with ultra soft flexible PVC jacket and all protective connector metal housing for maximum durability, reliability, easy installation, and dependability. Effective EMI and RFI RejectionConfigured with spiral signal shield made of oxygen-free copper OFC for flexibility and effective EMI and RFI rejection.

The AxcessAbles TRS 14-inch 6.35mm stereo balanced instrument cable to male XLR connection offers premium-grade oxygen-free copper core, ensuring superior quality and performance. With 2-feet in length, it provides ample reach for your equipment requirements, delivering optimal results.. Our cable is thoughtfully designed with high-quality heat shrink tubing, which offers superior tug protection to ensure long-lasting durability and reliability throughout its lifespan.. Our line of cables features top-tier metal plugs, renowned for their exceptional quality, tight and robust connections, and unwavering dependability even with prolonged use. The casings are designed to securely tighten, providing added strength and reliability.. AxcessAbles color-coded cables are perfect for efficient identification and organization purposes. The use of distinct colors allows for quick and easy recognition, making it simple to differentiate between various cables and streamline your setup.. The TRS 14-inch 6.35mm stereo balanced male to female XLR connection is a versatile audio cable for instruments, studios, and various applications. It enables balanced audio connections, links line-level devices, connects effects loops, patches audio systems, and ensures high-quality balanced audio transmission.. AxcessAbles provides a 1-year warranty, ensuring customer satisfaction. Our US-based support team is here to assist you with any technical issues or inquiries you may have..

PRO GRADE XLR CABLE Professional Series XLR Plugs, the sensible choice for professional audio equipments with 14 Inch TRS and XLR connectors. Give you the perfect sound quality. EXCELLENT SOUND 20 AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance.. PROFESSIONAL QUALITY 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer The right size, they always fit correctly, never too tight or too loose.. DURABILITY The wire is flexible and Strong toughness, Environmentally friendly PVC, and premium metal housing and durable. 15000 bend lifespan braided nylon exterior make audio cables adding to the durability and tangle free.. USAGE XLR Male to 14 inch 6.35mm TRS cable compatible with equipments with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier..

Professional Balanced Features 14 TRS to XLR3M connectors for superior signal integrity.. Noise Reduction Minimizes interference and hum for pristine audio quality.. Durable Construction Built for the demands of studio and live sound environments.. Versatile Connectivity Ideal for connecting balanced line-level signals to XLR inputs.. Versatile for Pro Audio Available in various configurations and compatible with a wide range of gear..

PROFESSIONAL STUDIO QUALITY - Premium 99.99 oxygen-free copper conductors with 24K gold-plated connectors deliver crystal-clear audio signal transmission for microphones, mixers, audio interfaces, and studio equipment - perfect for recording studios, live performances, and home studios. NOISE-FREE PERFORMANCE - Advanced shielded design with bare copper braided shielding and multi-layer protection eliminates interference, hum, and unwanted noise for professional-grade sound quality that musicians and audio engineers demand. UNIVERSAL COMPATIBILITY - Works seamlessly with all major audio equipment including mixers, amplifiers, PA systems, studio monitors, microphones, guitars, keyboards, and recording devices - ideal for connecting XLR outputs to 14 TRS inputs. BUILT TO LAST - Heavy-duty construction features zinc alloy die-cast connectors, abrasion-resistant PVC jacket, and reinforced strain relief designed to withstand frequent use in demanding studio and stage environments - tested for over 10,000 connection cycles. COMPLETE VALUE PACK - Includes 2 cables 2 feet each for backup, replacement, or multi-device setups, plus worry-free warranty and responsive customer support - everything you need for professional audio connections at an unbeatable price.

Easy Connection Connects any audio device with XLR input with 14 inch TRS jack. High Quality Sound gold plated connector ensures minimum signal loss transfer and high quality sound. Durable Design PVC flexible jacket, oxygen free copper and bare copper braided shielding prolong the life span of this cable. XLR to Stereo Audio Provides an easy to transfer signal from 14 inch jack to professional XLR enabled devices. What you get 6.35mm to XLR cable with JD 1-Year Limited Warranty.

Professional XLR Male to 14 TRS Balanced Audio Cable Upgrade - Premium oxygen-free copper conductors with gold-plated connectors eliminate noise and signal loss. Essential 2-pack for studio engineers, musicians, and live sound professionals seeking crystal-clear audio transmission in recording and performance setups. Triple Shielding Technology Blocks Interference - Advanced braided shield design prevents RF noise, ground loops, and electromagnetic interference. Maintains consistent signal quality for microphones, mixers, preamps, and powered speakers in demanding studio and live environments. Universal Compatibility for Major Audio Brands - Precision-engineered connectors work seamlessly with audio equipment. Perfect replacement cable for Behringer, for Yamaha, for Mackie, for PreSonus, for Focusrite mixers, interfaces, and studio gear without adapters needed. Heavy-Duty Construction Built for Daily Professional Use - Reinforced strain relief boots and durable PVC jacket withstand frequent plugging and touring demands. Flexible 1-foot design ideal for rack connections, patch bay routing, and equipment linking without signal degradation. Complete Stereo Setup Value Pack - Red and black cable pair perfect for stereo configurations, leftright channel setups, or backup connections. Tool-free installation saves time for home studios, recording facilities, live venues, churches, and mobile DJ applications.

PROFESSIONAL 14 TRS TO XLR CABLE 2-PACK 2-foot balanced microphone patch cables with male TRS 14 inch to male XLR 3-pin connectors - perfect for connecting mixers, amplifiers, studio monitors, and powered speakers in professional audio setups. 24K GOLD-PLATED CONNECTORS FOR CRYSTAL CLEAR SOUND Oxygen-free copper conductors with bare copper braided shielding eliminate hum and interference - gold-plated contacts resist corrosion ensuring reliable signal transmission for pristine audio quality. HEAVY-DUTY CONSTRUCTION FOR STUDIO AND STAGE 20 AWG wire gauge handles professional audio levels - zinc alloy die-cast housing with flexible rubber jacket withstands extreme temperatures from -35C to 105C for reliable performance. BALANCED AUDIO DESIGN ELIMINATES NOISE Shielded balanced construction delivers high-fidelity sound without signal loss or jitter - polyethylene insulation improves high-frequency response for detailed, natural audio reproduction in recording applications. VERSATILE COMPATIBILITY WITH PRO AUDIO GEAR Works perfectly for studio monitors, karaoke systems, acoustic guitars, mixers, microphones, and amplifiers - 2-foot length ideal for equipment connections and cable management in home studios.

REAN connectors for superior signal transfer rugged durability. 24 AWG Oxygen-Free Copper OFC conductors for enhanced signal clarity. 90 percent OFC spiral shield for effective EMI and RFI rejection and flexibility.

14 TRS-XLR3M Balanced Interconnect Cable with REAN Connectors - 5'.

14 TRS-XLR3M Balanced Interconnect Cable with REAN Connectors - 1.5'.

Professional Studio-Grade Audio Transmission The HOSONGIN XLR male to 14 TRS male balanced cable delivers studio-quality audio transmission for professional recordings. Engineered with precision, it ensures crystal-clear signal transfer from microphones to audio interfaces. Featuring gold-plated XLR and TRS connectors with balanced wiring, Perfect for connecting condenser mics to preamps.. Road-Ready Live Sound Performance This rugged microphone cable handles the toughest stage conditions, reliably connecting mixers to powered speakers. Its dual-layer shielding aggressively blocks RFEMI interference, guaranteeing noise-free audio even in 20 foot cable runs. Whether you'reat a club or setting up monitors for a festival, this cable won't let you down mid-performance.. Smart Instrument Connection Solution The 14 TRS to XLR male cable expertly converts unbalanced instrument signals to clean balanced feeds through DI boxes. It solves common stage problems like ground loops and interference from lighting rigs, giving guitarists and bass players pure tone transmission. Touring musicians will appreciate how it maintains signal integrity night after night.. Universal Connectivity for Any Setup As the ultimate 14 to XLR adapter cable, it bridges all your gear - from keyboard outputs to monitor inputs. The 3-pin XLR supports phantom power requirements while the TRS end ensures proper balanced connections. Podcasters, producers, and engineers love its versatility across mixers, interfaces, and PA systems.. Professional-Grade Durability Built to outperform cheap cables, this XLR to 14 adapter cable features oxygen-free copper cores and nickel-plated strain relief. The rugged design resists kinks, corrosion, and signal degradation whether you're in the studio daily or touring monthly. Pro tip For permanent installations, pair with premium cable management systems..

Balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal.. Prevents ground loop issues.. XLR to 14 TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage.. Our new Permier Series cables up the ante in terms of construction quality and performance..

26AWG conductors with aluminum foil shielding. Eight balanced mono or unbalanced stereo lines with color-coded wires. 14 TRS plugs on one and end XLR male plugs on the other end. Quality at a Fair Price Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices..

Balanced XLR to 14 cable is perfect for interconnecting many types of audio equipment with XLR connector and 14 inch TRS jack. Pro grade performance with oxygen-free copper OFC conductors to deliver pristine sound. The XLR male to 14 cable has copper braided shielding to provide maximum cancellation of hum and noise Polyethylene insulation improves high frequency response of the 14 inch to XLR cable. Robust construction includes a flexible PVC jacket with gold-plated connectors in a rugged metal housing The 14 to XLR cable has molded strain relief to support the weight of a Microphone. 14 to XLR male cable has 360 degree easy-grip treads for frequent unplugging and durability.

Balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal.. Prevents ground loop issues.. XLR to 14 TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage.. Our new permier series cables up the ante in terms of construction quality and performance..

Balanced 14-inch TRS to XLR male adapter converts a 14-inch input into an XLR male output. Connection A 3-Pin XLR Male Connector Connection B 14 TRS Plug.. High Quality, Robust and durable all-metal die-cast housing, Stable, Durable, and Flexible, work perfectly.. The international standard of audio connectors, reliable transmission of audio frequencies, all-metal construction ensure loss-less transmission signal. Protective Shielding for RF and EMI noise elimination.. Another one of those adapters that every audio geek needs to have in their toolbox. XLR Adapters for Pro Audio use. Great for mixers, microphones, amplifiers, EQ, rack gear, keyboards, guitars, electric piano, electric drums, etc..

Multiple Applications and Widely Compatibility This xlr to 14 designed to convert a balanced XLR output to a 14 TRS input, suitable for microphones, mixers, audio interfaces, power amplifier, stereo system and other types of audio equipment with XLR connector and 14 inch TRS jack.. 24AWG OFC Braided Shield Design AuxLink 14 to xlr use 24AWG OFC braided conductor with a multi-layer shielding structure. Double shielding, foil shielding and metal braid shield to provide nature sound, noise shielding, no noise.. Hi-Fi Sound Quality This trs to xlr uses 24K Gold-plated XLR and 6.35mm connector, it could eliminate signal loss and static noise,provide durability and improve the signal transmission the copper shell blocks any interference which prevents the loss of sound quality In addition, we add an anti-jamming magnetic ring to this cable which can anti-interference and filtering functions, ensures the stable signal transmission without loss provide Hi-Fi sound quality for you. Soft Flexible Nylon Braided Cable Add a nylon braided to the import PVC Jacket, enhances it's flexibility and durability. This xlr male to 14 cable can stand 150,000 times bends without reducing the flexibility. 10 times more durable and extend the service life.. What You Get XLR to trs cable 6ft 1pack. AuxLink is a professional manufacturer focusing on audio cables, we can provide our customer with high quality product..

Unbalanced XLR to 18 inch cable connects an iPhone, iPod, MP3 player, tablet, laptop, or voice recorder to a mixing console or powered speakers Connect a smartphone with headphone jack to XLR input Connect a tablet using an instrument App into a mixing console for a performance. XLR to Aux cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed The 18 to XLR cable provides a quick and convenient solution to connect many devices with the common mini phone jack to mixing and speaker equipment with XLR female ports. Pro grade performance with oxygen-free copper OFC conductors to deliver pristine sound Bare copper braided shielding provides maximum cancellation of hum and noise Polyethylene insulation improves high frequency response. Robust construction includes a flexible PVC jacket with gold-plated connectors in a rugged metal housing XLR male connector has molded strain relief to support the weight of the connector XLR to 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability. 3.5mm to XLR compatible with a mixing console or powered speakers such as the Behringer EUROLIVE or Behringer Xenyx.

Balanced female XLR to 14 cable connects a shotgun or condenser Mic with a male XLR connector to an equipment with a balanced 14 inch TRS jack. Pro grade performance with oxygen-free copper OFC conductors to deliver pristine sound. The 14 inch to XLR cable has copper braided shielding to provide maximum cancellation of hum and noise Polyethylene insulation improves high frequency response. Robust construction includes a flexible PVC jacket with gold-plated connectors in a rugged metal housing The XLR female to 14 cable has molded strain relief to support the weight of a Microphone The 14 to XLR cable has 360 degree easy-grip treads for frequent unplugging and durability. Compatible with shotgun and condenser Microphones such as the Nady CM-2S Stereo Condenser Wired Microphone, Azden SGM-1X Professional Shotgun Microphone, and Audio-Technica AT875R Short Shotgun Microphone.

CableCreation Standard 3Pin XLR to 14 microphone cable design to transit audio signal between audio equipment with XLR and 14 TRS interface.. The 14 to male xlr use gold plated connector to provide frequent unplugging and durability. Thick TPE jacket, strong and durable,ideal for outdoor use.. This trs to xlr balanced audio cable use pro grade oxygen-free copper OFC conductors to deliver pristine sound maximum cancellation of hum and noise. Compatible with microphones, amplifiers, mixers, speakers, Shotgun Microphone,guitars, studio monitor,phantom power supply,Home Karaoke system and other audio device to recordingedit music,hold a concert,do public speech.... You will receive 6 feet xlr 3 pin male to 14 6.35mm female cable and 2 years warranty and lifetime tech support..

Heavy Duty Flexible Rubber Jacket. Metal 3 Pin Male XLR 14 Ends. Tri-Grip Rubber Booty XLR Strain Relief. Dual High Grade 21g Copper Conductors and Shield. High Quality Noise Free Performance.

Made of high purity 22awg ofc conductor We use good quality oxygen free copper with shielding ensuring high fidelity sound quality and providing maximum's conductivity and durability. It's especially great for studio or live performances.. Double-shielded The cable constructed with double-layers of shielding high density bare copper braid shielded aluminium foil minimize signal interference and ensure the transmission stable, provides maximum against electro magnetic interference emi and radio frequency interference rfi.. Incredibly durable With a 10000 bend lifespan several times longer than original xlr cables, premium metal housing and durable, high purity ofc internally, rohs pvc environmentally friendly materials and nylon braid externally, against scratching and abrasion, prolonging it's service life.. Compatible flexible Xlr male to 14 6.35mm trs cable compatible with equipments with 3-pin xlr connectors and 6.35mm socket such as mixer, camera, amplifier, soundbox, microphone, power amplifier.. Kinxiyu is committed to provide consumers with high-quality cables and better after-sale service. All of our cable provide 1-years after-sale service. If you have any problems, please feel free to contact us via Amazon..

Balanced 14 TRS to XLR Male CableThis xlr to 14 quarter inch cable is used to output balancedunbalanced audio signal from 14 port to xlr input device. Output device can be mixer, dj controller, podcast, keyboard, electronic drum, etc. These devices usually has 14 balunbal output port, which are usually marked with main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc. Input devices are usually powered speaker, stuido monitor, interface, AMP, etc.. TS replacement active speakerThis stereo balanced trs cable can be used on unbalanced 14 mono TS port, please don't worry, only issue is that you can can still only get unbalanced output. For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound. Please do not use to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal.. Noise-Free Heavy Duty This trs to xlr adapter cord is braided design with nylon coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90 OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire won't break out easily.. 3.3FT X2Package will come with 2X 3pin XLR male to TRS cables, each is 3.3FT1meter, red color. Please double check if this length is right for you.. Customer SupportWe offer 2 years after-sales support for this trs to xlr male cable, for any issues during 2 years, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. We'll give response within 12 hours..

Balanced male XLR to 14 adapter connects an XLR cable to a 14 inch TRS jack. Pro-grade performance delivers pristine sound with this male 14 to XLR adapter. Male 14 inch to XLR adapter features robust construction in a rugged metal housing. Male XLR to 14 inch adapter is compatible with mixer and speaker with TRS and XLR. Convenient and cost effective 2-pack male to male XLR to TRS adapter.

FLAWLESS DURABLE - This professional 3 pins XLR male to 14 TRS audio cable with traditional large size of 3 pin zinc alloy XLR connector female to black metal TRSbig male pin plated with 24K gold. Robust big size connectors, not afraid of any ends separating.. HIGH GRADE TRANSMISSION - Balanced Lo-Z wire, assures the transmission in a smooth quality way.. NOISELESS - Dual Insulated shielded insulated copper conductor Oxygen Free Copper, extra large quantities of braided copper inside, resist the interference EMI or RF from outside.. APPLICATION - Transport signalstereo audio between 14 TRS and XLR such as between audio mixer to speaker, and etc. It also can be as a set of patch cable for your studio.. MORE CHOICE - You can also find the packs of female XLR to 14 TRS with 2 packs, or packs of guitar cable with 14 to XLR male female cables, as well as 3ft 6ft from EBXYA store on amazon..

Specification This balanced 14inch to 3pin XLR Male cable is 15FT long. The wire is nylon braided, it's strong and heavy duty. 14inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.. Noise Free This TRS to XLR male cable is full covered with spiral OFCoxygen free copper inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI.. Not Use for Guitar This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 14 instrument jack, but not XLR jack. 14inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc.. Package Items The package include two 6.35mm to XLR male cable, each cable is 15 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake.. 2-year Warranty Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed..

Professional quality professional 3-pin XLR to 1 4 6.35 mm stereo adapter is your best choice, giving you perfect sound quality. DURABLE CONNECTORSadopt 24K gold plating process, corrosion resistance, provide high guarantee smooth signal transmission, minimize the loss of signal transmission.. FLEXIBLE PVC JACKET Preventing twisting, kinking and tangling and easy to be packed and housing and durable, With a much longer service life.. APPLICATIONSXLR 3-pinMale to 6.35mmMale stereo Adapter is perfect for connecting microphones with 14 jack to Amplifier, Soundbox, Microphone, Mixer, guitar, tuner and other professional equipment. HIGH QUALITY CONDUCTOR 4N oxygen free copper balanced audio cable with shielding, high fidelity, seamless audio transmission,.