Easy to cut ridges allow for a perfect fit on all vehicles. Installation cone allows boot to slide over tie-rod without having to realign. - Specially Formulated, Highly Flexible Durable.

Fits most vehicles. Can be installed without removing rack and pinion from vehicle, thus eliminating need for an alignment. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. One year .

Tie rod Includes 2 x Front Outer Tie Rod End.2x Front Inner Tie Rod End Driver and Passenger Side.2x Rack and Pinion Boots.. Perfect Fitment DOES NOT FIT ALL-WHEEL DRIVE MODELS.Please check the Amazon Confirmed Fit and product description for accurate information.. Greaseable Socket Ball Joint in the kit is pre-greased and has grease fitting that can reduce tear and wear by allowing new lubricant to flush contaminants.. Easy Installation Steering alignment and precision tolerances for easy installation. Excellent material is used for automotive replacement sway bar that makes it more difficult to tear and damage.. Warranty and Support Limited warranty and friendly customer service. Contact us if any problem and we will reply to you as soon as possible..

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

FitmentToolwiz tie rod boot is 8.85220mm Length, Small End 0.3910mm ID, Large End 1.2534mm. It is compatible with inner tie rod shaft diameter 1012 mm 0.390.47 in, steering rack housing outer diameter 3335 mm 1.301.38 in. Thanks to its soft material and flexibility, this steering rack boot can be cut to fit various rack and pinion sizes, providing effective protection for the steering system. It is compatible with most cars, trucks, SUVs, and other vehicles. Please double-checking your vehicles model and steering rack size before purchasing to ensure proper fit.. Waterproof DustproofToolwiz tie rod boot kit helps protect your car's power steering rack and pinion from dust, water, and other debris, effectively reducing wear and tear on the steering components, preventing safety hazards caused by steering system malfunctions while enhancing the system's reliability and responsiveness. Anti-Wear Silicone MaterialCrafted from high-quality silicone, our inner tie rod dust boot offers outstanding durability, flexibility, and anti-slip. It can increase the friction between the sheath and the steering rack to prevent the sheath from slipping or shifting during steering. It resists wear, aging, stain, and extreme temperatures without deforming, which ensures stable performance in harsh conditions and provides long-term protection for your vehicle's steering system. Easy InstallationFirst, remove the wheel, disconnect the outer tie rod end, remove the old dust cover, and clean any dirt or old grease from the tie rod. Then, slide the new dust cover into place and press it onto the power steering rack, making sure it is sealed securely and no twisting or kinking in the rubber. Finally, use the included bellows tie or clamp to secure the dust cover and lock it tight. Complete Kit IncludedOur tie rod boot kit comes with everything you need for installation. It includes 2 x rack and pinion boots, 2 x small clamps max I.D. 1.82 46 mm, 2 x large clamps max I.D. 2.36 60 mm, and 6 x wire ties 7.8 200mm long.

Specs Tie Rod Boot Kit. Meets or Exceeds OEM Specs for Fit and Performance. Compatible WithReplacement For Can-Am Commander 1000 Early Build 14mm 2013, Commander 1000 Late Build 16mm 2013, Commander 1000 STD 2011-2012, Commander 1000 XTLTDDPS 2011-2012, Commander 800 Early Build 14mm 2013, Commander 800 Late Build 16mm 2013, Commander 800 STD 2011-2013, Commander 800 XT 2011-2012, Polaris General 1000 EPS 2016-2019, General 1000 EPS Deluxe 2019, General 1000 EPS Premium 2019, General 4 1000 EPS 2017-2019, LSV ELECTRIC 4x4 2011-2012. 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement.. 100 New aftermarket Tie Rod Boot Kit built to meet OEM specifications.

Kit Includes 2x Front Outer Tie Rod Ends 2x Front Inner Tie Rod Ends 2x Rack and Pinion Bellow Boots Tie Rod Boots 2x Grease Fittings 2x Cutter pins 2x Nuts.. Perfect Fitment Direct replacement like OEM for Chevrolet Silverado 1500 GMC Sierra 1500 1999-2006. Please check the Amazon Confirmed Fit and product description for accurate information.. Greaseable Socket Outer Tie Rod Ends kit is pre-greased with original lubricant and has grease fitting which can reduce tear and wear by allowing new lubricant to flush contaminant.. Safe and Durable Tie rods end kit is easy to install like OEM alignment in steering parts, excellent materials keep long life and maximize absorption, tie rod end boot self lock make it not easy cracked.. Smooth Drive Rack and Pinion Bellow Boot provides revamped steering and handling feel. After easy installation, the tie rod end kit can reduce front end noise and promote daily drive experience..

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

Efficient Protection Our inner tie rod boot features a hollow design that allows air to flow on both sides of the gears, reducing the high temperature and pressure in the steering system, minimizing the risk of deformation, and ensuring stable performance over time, while effectively preventing the ingress of water and impurities. Quality Material The universal steering rack and pinion tie rod boot is made of wear-resistant silicone with good elasticity, which can resist aging and the effects of bad weather, providing long-lasting protection for the steering system and prolonging its service time. Total Package Each Steering Rack Boot Kit includes 2 tie rod guards, 6 cable ties about 7.87 inches long, 4 bellows locking clips large clip caliber is about 2.76 inches, small clip caliber is about 1.97 inches, no need to buy additional accessories, easy to install and enhance the efficiency of use. Easy to install The silicone bellow boot is extremely easy to install, simply remove the old sheath, easily clean the surface of the steering rack, and then place the new sheath to perfectly cover the area that needs to be protected. Easily secured with the included cable ties and C-clamps to ensure stability, a final check and you're ready to travel safely. Wide Compatibility Our rack and pinion boots are suitable for most cars, SUVs, trucks and trailers, you can easily judge the compatibility according to the product size bellows large diameter is about 1.38 inches, small diameter is about 0.59 inches to ensure the best protection and performance for your vehicle.

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. The product has undergone rubber resistance to ozone aging, sediment impact, high and low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

Internal Diameter of big hole bottom 34 mm Internal Diameter of small hole top 14 mm Height 26 mm. Replacement part number1885486M1, 1885486M91, 885486M91 1885486M1-A885486M91-A. Tie Rod End Boots Fits for Massey Ferguson Tractor 1885486M1, 1885486M91, 885486M911885486M1-A885486M91-A. Fits TE20 TEA20 TEF20 FE35 35 135 Fits Most Ball Joints. Good wear resistance The tractor drawbar end bush is usually made of wear-resistant materials, which have high wear resistance and self-lubricating properties, effectively reducing friction between the drawbar and other components, extending the efficiency of the drawbar and the bush itself, and lowering maintenance and replacement costs. Good cushioning and shock absorption During tractor operations, it is inevitable to encounter various bumps and impacts. The rod end bushing can absorb these impacts through its own elastic deformation, providing cushioning and shock absorption. For example, rubber bushings can effectively alleviate the instantaneous impact forces on the rod, protecting the rod and its connected components, and reducing loosening and damage of parts caused by vibration. Easy Installation The structural design of the tractor tie rod end sleeve is usually relatively simple, generally using insertion or snap-on installation methods. No special tools are required, allowing it to be easily installed at both ends of the tie rod. This simple installation method makes maintenance and replacement of the end sleeves more convenient and faster, reducing equipment downtime and improving work efficiency. Good sealing performance Excellent sealing is one of the important features of the tractor drawbar end sleeve. It can prevent impurities such as soil, dust, and rainwater from entering the connection points between the drawbar and other components, avoiding wear on the parts caused by these impurities, thereby ensuring the normal operation of the drawbar system.

Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Steering boot is made of high quality rubber material.It is in good use condition.Helps prevent dirt, water, and debris from getting inside and damaging the steering rack. Protect the steering rack from damage.. low temperatures, and fatigue tests to ensure the quality and stability of the product.. Warranty and Support -- Limited warranty and friendly customer service.

Front End Suspension Kit Fitment2012-2017 for Hyundai Azera, 2011-2013 for Hyundai Sonata, 2014-2015 for Kia Cadenza, 2011-2015 for Kia Optima. Replacement Suspension Kit Include6pc Set Suspension Kit 1 x ES800717 Front Outer Tie Rod End - Driver Side, 1 x ES800718 Front Outer Tie Rod End - Passenger Side, 2 x EV800974 Front Inner Tie Rod End, 2 x Front Steering Rack Boot. Top QualitySteering Suspension Kit is made of high-quality material, which is heat processed to increase strength and strong wear resistance, pre-greased socket and pre-installed boot keep dirt and water out for reliable performance and long life. Buyer's GuideSuspension kit complete full set typically includes control arms, idler arm, pitman arm, tie rod ends, sway bar links and ball joints,etc.All of our replacement suspension parts come pre-greased for reduced friction and long life, and will require no additional work. If you have any problems during the installation or use, we will supply you with professional technical guide. NoteSCITOO Auto provides 1 year replacement support, we supply premium quality suspension kit for most cars, SUVs, trucks and trailers. Please select your vehicle yearmakemodeltrim in the Part Finder to confirm compatibility, or see compatible vehicles in the description.

Front End Suspension Kit Fitment2004-2006 for Lexus ES330, 2002-2006 for Toyota Camry, 2004-2008 for Toyota Solara. Replacement Suspension Kit Include8pc Set Suspension Kit 2 x EV420 Front Inner Tie Rod End, 1 x ES80602 Front Outer Tie Rod End - Passenger Side, 1 x ES80603 Front Outer Tie Rod End - Driver Side, 1 x K90346 Front Lower Ball Joint - Driver Side, 1 x K90347 Front Lower Ball Joint - Passenger Side, 2 x Front Steering Rack Boot. Top QualitySteering Suspension Kit is made of high-quality material, which is heat processed to increase strength and strong wear resistance, pre-greased socket and pre-installed boot keep dirt and water out for reliable performance and long life. Buyer's GuideSuspension kit complete full set typically includes control arms, idler arm, pitman arm, tie rod ends, sway bar links and ball joints,etc.All of our replacement suspension parts come pre-greased for reduced friction and long life, and will require no additional work. If you have any problems during the installation or use, we will supply you with professional technical guide. NoteSCITOO Auto provides 1 year replacement support, we supply premium quality suspension kit for most cars, SUVs, trucks and trailers. Please select your vehicle yearmakemodeltrim in the Part Finder to confirm compatibility, or see compatible vehicles in the description.

CHASSIS PRODUCTS FIT - 2005 2006 2007 2008 2009 2010 for Honda Odyssey. INCLUDED COMPONENTS - 2 Rack and Pinion Bellow, 2 Front Outer Tie Rod End, 2 Front Inner Tie Rod End. WHEN TO REPLACE SUSPENSION KIT - ?Steering noise such as snapping, popping, creaking or groaning sounds when turning. Feeling every bump Suspension noise such as clunking or popping on rough roads. Difficulty when steering Memory steer or poor steering return where the car doesn't want to go straight after turning due to binding in the upper mount. SUSPENSION KIT BUYER'S GUIDE - A Suspension Kit is basically a collection of parts that are used to restore, replace, or modify a vehicle's suspension system. This suspension auto parts directly replaces the original assembly on specific vehicle applications, easy installation and steering alignment. All end parts are pre-greased and some ends are sealed for long using life. PLEASE NOTE - If you can't find or can't be sure whether it's correct, Please try to search SCITOOYearMakeModelPart in Amazon, or provide us with model information, we will find the right parts for you.

FITMENT - 2003-2009 For Toyota For 4Runner, 2007-2012 For Toyota Camry, 2003-2008 For Toyota Corolla, 2003-2008 For Toyota Matrix, 2009-2015 For Toyota Venza,2011-2015 For Chevy Cruze, 2016 For Chevy Cruze Limited, 2010-2017 For Chevy Equinox L4 2.4L, 2011-2015 For Chevy Volt, 2011-2017 For Ford Explorer, 2009-2015 For Ford Flex, 2010-2016 For Ford Taurus, 2010-2017 For GMC Terrain L4 2.4L, 2013-2018 For Hyundai Santa Fe,2012-2017 For Buick Verano,. ANTI-DUST DIRT - Using this steering rack boot kit prevents dust, dirt, sand, moisture and other external impurities from intruding into the interior of your car's steering system, which may lead to wear of the rack and pinion as well as other steering components, avoids safety hazards due to steering system malfunctions, and improves the reliability and responsiveness of the steering system. HIGH PERFORMANCE - ONE YEAR REPLACEMENT - Our steering rack boot kit have undergone extreme impact, wear and fatigue pre-try to help ensure quality and durability. FUNCTION - Steering Bellows have Advanced surface coating, precision-made performance and additional strength.. IMPORTANT NOTE - Please check the description or use the year,make,model in the Fitment Filter System in the top left corner to confirm the compatibility.

Full ProtectionRack and pinion boot prevents tires, bridges, water, and moisture from invading the interior of the car's steering system, protects the rack and pinion and other steering pivots from wear, and effectively improves the reliability and responsiveness of the steering system. High-quality Materials The steering rack and pinion is made of high-quality silicone material, which has good elasticity, wear resistance and durability, can withstand extreme weather and temperature, is not easy to deform and age, and supports long-term use. Full Set of AccessoriesOur inner tie rod boot tool kit includes tie rod boot 2, cable ties 6, and bellow clamps 4. A full set of accessories, you don't need to buy other tools separately, you can install it after receiving it. Free CuttingYou can freely cut both ends of the tie rod boot according to actual needs to get the right size, including inner diameter 0.39 0.78 1.1 1.37 1.25 1.49 1.65 1.77, suitable for most cars, SUVs, trucks and trailers. Warm Tips The length of the cut product will also be shortened accordingly. Easy to InstallThe installation is very simple, just remove the old kit, clean the steering rack surface, put the new steering rack cover on the rack, keep it completely covering the parts that need protection, use the provided cable ties and locking clips to secure both ends.

10pc Set Suspension Kit Fitment2009-2019 for Toyota Corolla. Suspension Kit Include2 x K90309 Front Lower Ball Joint, 2 x EV801193 Front Inner Tie Rod End, 2 x ES800525 Front Outer Tie Rod End, 2 x K80230 Front Sway Bar End Link, 2 x Front Steering Rack Boot. When To Replace Suspension KitIt's time to replace your suspension kit if you experience any of the following ? Steering noise sounds when turning Feeling every bump Difficulty when steering. Suspension Kit Buyer's GuideA complete suspension kit typically includes control Arm, idler arm, pitman arm, tie rod end,sway bar link, ball joint, center link, track bar, tie rod link,boot,bushing,ect. All of our suspension parts have been pregreased, require no more additional work. Premium Quality PartsSCITOO Auto Part select premium quality material to help ensure quality and durability 1 year replacement.Our suspension kit fit for CARS,SUVS,TRUCKS,TRAILERS.Please make sure your vehicle matches this kit before buying. Select your vehicle YearMakeModelTrim in the top left corner of the page to confirm compatibility,or see more compatible vehicles in the description.

Wide Compatibility This steering rack boot replacement for polaris ranger steering boot compatible with Polaris Ranger RZR 400 2010, RZR 500 2006-2012, RZR 570 2012-2016, RZR 700 2005- 2009, RZR 800 2008-2014, RZR 900 2012-2016, RZR 1000 2014-2016, ETX 2015, EV 2012. Replacement Part This steering boots replacement part for 5412013 polaris ranger steering boot and 5412012 polaris ranger steering boot. High quality material This steering rack boot is made of high quality rubber material. It can help to prevent dirt, water, and debris from getting inside and corroding the steering rack, protect the steering rack from damage. Universal Fit These steering rack boots can direct replacement for your original or old steering rack boots, replacement for polaris ranger steering boot, for polaris inner tie rod boot, for polaris ranger steering rack boot, for poloris ranger rack and pinion boot, for 5412013 polaris ranger steering boot, for 5412012 polaris ranger steering boot, etc. After-Sales Service We are dedicated to offering quality service. If you have any questions or concerns about our steering rack boots within 60 days, please contact us, and we will provide you with a satisfactory solution within 24 hours.

Pcs in Kit Steering Rack and Pinion Bellow with cable ties.. Exactly Fits The replacement tie rod boots kit perfectly fits for Honda-2009-2013 Honda Pilot, and for Lexus-2002-2003 Lexus ES300, 2004-2006 Lexus ES330, 2007-2012 Lexus ES350, 2004-2006 Lexus RX330, 2007-2015 Lexus RX350, 2010-2015 Lexus RX450h, and for Pontiac-2003-2008 Pontiac Vibe, and for Scion-2008-2014 Scion xD, and for Toyota-2005-2012 Toyota Avalon, 2002-2014 Toyota Camry, 2003-2013 Toyota Corolla, 2004-2019 Toyota Highlander, 2003-2008 Toyota Matrix, 2012-2019 Toyota Prius C, 2004-2009 Toyota Sienna, 2004-2008 Toyota Solara, 2009-2016 Toyota Venza, 2007-2015 Toyota Yaris. Please refer to the Amazon Confirmed Fit and product description for details.. Qualified Material Advanced-tech rubber can absorb impact and reduce the friction which undergo comprehensive test. Triple-Layer reinforced design provides OilUVAbrasion Resistance which covers -40F to 250F durability .. Easy Installation This tie rod boots set includes cable ties to ensure a one-step installation. The dimensions are identical to the oem parts are identical, allowing precise and direct mounting of replacements.. Reliable Warranty and Service 24-hours online customer service are always ready to help on any question about the pro duct. 10 thousand miles or one year warranty is provided..

STEERING RACK BOOT SIZE - The steering boot is 6.97 inch in length, the small port diameter is 0.39 inch, the large port diameter is 1.3 inch, please check the size data you need before purchasing. PACKAGE DETAILS - 2x Steering Rack Boot with Rack and Pinion Bellow Clamps. DURABILITY - Advanced-tech material can absorb impact and reduce the friction which undergo comprehensive use in all condition. Reinforced design provides abrasion resistance which covers -40F to 250F durability. EASY INSTALLATION - Rack pinion bellow boots steering kit is conveniently designed to keep your vehicle's steering system protected from dust and debris, and installs quickly and easily, extending the life and your driving experience, saving you time and effort. PURCHASE NOTES - Please check the steering rack boot kit regularly. If it is damaged, please replace it immediately. Before purchasing, please check whether the part is suitable for your model. Whether you need help choosing the right part or need advice on how to install it, we are here to help you.

High Quality The ball joint dust cover is crafted from durable, high-temperature resistant rubber. It remains resilient and flexible even after prolonged use in harsh conditions, ensuring reliable performance and long-term protection for your vehicle's operation.. Features The ball joint dust cover delivers outstanding sealing performance, exceptional load-bearing capacity, and superior dust resistance. It operates reliably in diverse harsh conditions, providing comprehensive protection for your vehicle's rotating systems.. Flexible Design Featuring a mortise-and-tenon locking system, the dust cover's flexible design minimizes wear while extending tire life, enhancing handling, eliminating tension, and increasing vehicle mileage.. Easy Installation The ball joint dust cover kit replaces original vehicle drive shaft dust covers effortlessly. No additional tools are required for modificationsimply insert into place to directly replace the original dust cover track.. Package Specifications Includes 14 rubber ball joint assemblies with the following height and maximum diameter combinations 0.68 x 1.51 , 0.9 x 1.53 , 0.88 x 1.57 , 0.86 x 1.55 , 0.86 x 1.39 , 1 x 1.67 , 0.98 x 1.45 x 1.65 , 0.94 and 1.69 , 0.82 and 1.65 , 1.1 and 1.85 , 1.02 and 1.65 , 1.14 and 0.71 , 1.39 and 1.92 ..

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

Front End Suspension Kit Fitment2004-2006 for Lexus ES330, 2004-2006 for Toyota Camry, 2004-2008 for Toyota Solara. Replacement Suspension Kit Include6pc Set Suspension Kit 2 x EV420 Front Inner Tie Rod End, 1 x ES80602 Front Outer Tie Rod End - Passenger Side, 1 x ES80603 Front Outer Tie Rod End - Driver Side, 2 x Front Steering Rack Boot. Top QualitySteering Suspension Kit is made of high-quality material, which is heat processed to increase strength and strong wear resistance, pre-greased socket and pre-installed boot keep dirt and water out for reliable performance and long life. Buyer's GuideSuspension kit complete full set typically includes control arms, idler arm, pitman arm, tie rod ends, sway bar links and ball joints,etc.All of our replacement suspension parts come pre-greased for reduced friction and long life, and will require no additional work. If you have any problems during the installation or use, we will supply you with professional technical guide. NoteSCITOO Auto provides 1 year replacement support, we supply premium quality suspension kit for most cars, SUVs, trucks and trailers. Please select your vehicle yearmakemodeltrim in the Part Finder to confirm compatibility, or see compatible vehicles in the description.

1.Versatile Application Suitable for any vehicle with the correct size, our universal arm ball joint head dust proof rubber sleeve track covers offer a perfect fit every time. 2.Enhanced Protection Our quality rubber tie rod end cover boot offers optimal protection for the ball head reducing wear and tear. Our brand new ball joint boots effectively enhances driving performance and safety.. 3. Size Model-3 dDHW--11mm x 27mm x 25mm x 37mm2,13mm x 28mm x 22mm x 39.5mm2, 13mm x 30mm x 23mm x 39mm2, 13mm x 30mm x 24mm x 43mm2, 15mm x 30mm x 22.5mm x 40mm2, 16mm x 34mm x 26mm x 42mm2, 21mm x 35mm x 28mm x 47mm2. 4. High-Quality Material Crafted from premium rubber materials, our suspension ball joint boot and tie rod boot are both lightweight and durable, providing a longer service life. 5. Please confirm the correct size you need before making your purchase.

Part Type tie rod boots. 2 Inner 2 Outer left right boots whardware. Compatible Equipment Make For Kubota. Model For BX, For GR. Fitment For BX1850, 60, 70, 80,For BX22, 2200, 2230, 2350, 2360, 2370, For BX23, For BX24, For BX25, For BX2380, For BX23s, For BX2670, For BX2680 etc For All GR mowers.

Rack Pinion Bellow Boot Fitment2015-2018 for Chevy City Express, 2009-2015 for Honda Pilot, 2002-2003 for Lexus ES300, 2004-2006 for Lexus ES330, 2016-2018 for Lexus ES350, 2004-2006 for Lexus RX330, 2007-2015 for Lexus RX350, 2010-2015 for Lexus RX450h, 2014-2018 for Mazda 3, 2014-2021 for Mazda 6, 2013-2021 for Mazda CX-5, 2014-2022 for Nissan for LEAF, 2013-2021 for Nissan for NV200, 2013-2022 for Nissan for Sentra. Rack Pinion Bellow Boot Fitment2008-2014 for Scion xD, 2005-2018 for Toyota Avalon, 2002-2011 2015-2017 for Toyota Camry, 2009-2013 for Toyota Corolla, 2004-2007 for Toyota for Highlander, 2012-2018 for Toyota for Prius C, 2003-2010 for Toyota for Sienna, 2004-2008 for Toyota Solara, 2009-2015 for Toyota for Yaris, 2003-2014 for Volvo XC90. Thickened and Durable MaterialThe upgraded steering tie rod boot is made of thickened material, which has excellent high and low temperature resistance, and is not prone to hardening or cracking in harsh weather and complex road conditions. Its significantly improved toughness allows it to fit tightly to the tie rod without loosening, and it will not fall off even when the vehicle vibrates. It also reduces wear and tear on moving parts, extending the lifespan of core components. Easy Replacement StepsThe installation steps are simple and easy to understand ? Move old boots and clean the steering parts Put the new boot over on the tie rod until fully wrapped Tighten it with clamps and cable ties Check firm fit before driving. It is fully compatible with the steering systems of various vehicle types, including sedans, SUVs, and trucks. High Performance - ONE YEAR REPLACEMENT - It is recommended to regularly check the boot for damage, aging, or deformation, and to ensure the fixing devices at both ends are secure. Replace any damaged rack and pinion tie rod boot promptly to effectively extend the lifespan of the steering system's core components.

Matches OE form, fit, and function. One piece neoprene boot this is not a split boot. Includes boot and two clamps for complete installation.. Quality construction for durability. Application specific to ensure a correct fit for your vehicle.

Rack Pinion Bellow Boot Fitment1996-2002 for Toyota for 4Runner, 1995-2004 for Toyota for Tacoma. Package Include2 x Rack And Pinion Tie Rod Boot. Thickened and Durable MaterialThe upgraded steering tie rod boot is made of thickened material, which has excellent high and low temperature resistance, and is not prone to hardening or cracking in harsh weather and complex road conditions. Its significantly improved toughness allows it to fit tightly to the tie rod without loosening, and it will not fall off even when the vehicle vibrates. It also reduces wear and tear on moving parts, extending the lifespan of core components. Easy to InstallThe installation steps are simple and easy to understand ? Remove old boots and clean the old residue from the steering parts Put the new boot cover on the tie rod until fully covered Secure it with clamps and cable ties Check firm fit before driving. It is perfectly compatible with the steering systems of various vehicle types, including sedans, SUVs, and trucks. High Performance - ONE YEAR REPLACEMENT - It is recommended to regularly check the boot for damage, aging, or deformation, and to ensure the fixing devices at both ends are secure. Replace any damaged rack and pinion tie rod boot promptly to effectively extend the lifespan of the steering system's core components.

STEERING RACK BOOT SIZE - The steering boot is 7.64 inch in length, the small port diameter is 0.63 inch, the large port diameter is 2.11 inch, please check the size data you need before purchasing. PACKAGE DETAILS - 2x Steering Rack Boot with Rack and Pinion Bellow Clamps. DURABILITY - Advanced-tech material can absorb impact and reduce the friction which undergo comprehensive use in all condition. Reinforced design provides abrasion resistance which covers -40F to 250F durability. EASY INSTALLATION - Rack pinion bellow boots steering kit is conveniently designed to keep your vehicle's steering system protected from dust and debris, and installs quickly and easily, extending the life and your driving experience, saving you time and effort. PURCHASE NOTES - Please check the steering rack boot kit regularly. If it is damaged, please replace it immediately. Before purchasing, please check whether the part is suitable for your model. Whether you need help choosing the right part or need advice on how to install it, we are here to help you.

Pcs in Kit Steering Rack and Pinion Bellow with cable ties.. Fitment details The replacement tie rod boots kit perfectly fits for Ford-1998-2011 Ford Ranger, and for Mazda-2001-2009 Mazda B2300, 1998-2001 Mazda B2500, 1998-2007 Mazda B3000, 1998-2008 Mazda B4000. Please refer to the Amazon Confirmed Fit and product description for details.. Qualified Material Advanced-tech rubber can absorb impact and reduce the friction which undergo comprehensive test. Triple-Layer reinforced design provides OilUVAbrasion Resistance which covers -40F to 250F durability.. Easy Installation This tie rod boots set includes cable ties to ensure a one-step installation. The dimensions are identical to the oem parts are identical, allowing precise and direct mounting of replacements.. Reliable Warranty and Service 24-hours online customer service are always ready to help on any question about the pro duct. 10 thousand miles or one year warranty is provided..

High-Quality Material This tie rod boot is Made of high-quality rubber, wear-resistant, high temperature-resistant, good impact resistance, not easy to deform, durable, providing excellent protection for your vehicle's ball head.. Flexible Design Featuring a mortise and tenon fastening system, this tie rod end cover is designed to minimize wear and extend tire life. The flexible design improves handling, eliminates tension, and increases fuel mileage, especially in fully locked states.. Features With good sealing, load-bearing capacity, and dust-proof performance, this spherical universal joint dust cover kit is a reliable choice for any driving conditions, ensuring optimal protection for the tie rod ball joints.. Easy Installation This tie rod boot features a convenient plug-and-play design, you can effortlessly replace your car ball joint dust cover with no need for specialized tools. Directly replace your original rubber dust cover track.. Wide Compatibility This set includes 14 rubber ball heads for internal or external tie rod ball heads, making it suitable for most car. Upgrade your ball joint boot with this comprehensive kit for enhanced performance and durability..

Compatible with Acura Audi Buick Chevrolet GMC Honda Hyundai Kia Lexus Mazda Mercedes-Benz Nissan Toyota Volkswagen. OEM Design Direct Fit Eliminates rattling and clunking noises associated with a failed tie rod Precision-made performance and additional strength. Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.. Restores proper vehicle balance and Promotes longer shock life. Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner.

Compatible with Chevrolet Prizm Geo Prizm Toyota Corolla Toyota RAV4. OEM Design Direct Fit Eliminates rattling and clunking noises associated with a failed tie rod Precision-made performance and additional strength. Designed with PREMIUM quality materials for exceptional performance, reliability and peace of mind. Restores proper vehicle balance and Promotes longer shock life. Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner.

Package Dimensions 14.22 H x 2.03 L x 7.11 W centimetres. Extends the life of your tie rod. Package Weight 0.04 kilograms. Country of Origin United States.

POWER STEERING. Fits Specific Models - Check Fitment Chart and Product Description for Accurate Information. Kit Includes 2x Rack and Pinion Tie Rod Boots Bellows. Detroit Axle Rack and Pinion bellow Kits are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs. 10-Year Warranty.

High quality.MaterialPolyurethane on Bushings. High performance. Professional products. Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently.

Vehicle Specific. High performance. High quality. Professional products.

High performance. High quality. Professional products. Vehicle Specific fit.

Easy to install. Manufactured using premium materials. Engineered to provide long life and dependability. Construction and design validated by MOOG engineers. Incorporates proven design and engineering features.