Upgraded Workbench CastersThe heavy duty casters, constructed with durable solid steel and premium urethane casters, which can move smoothly and easily support up to 600 lbs per set. The wear-resistant urethane casters can work smoothly for heavy duty workbenches tables and equipments.. Retractable Casters Easy Operation- It just takes one foot to lift workbench table and equipment. Step on the pedal then lift the workbench to an fixed height. Pay attention NOT to step on the edge of outer side, just put your foot at the middle point of pedalsee image 5. The workbench casters cannot work on rocky road, but it works well on smooth road.. 360-Degree Casters- The workbench casters equiped with 360-degree swivel bracket, the wheel can turn to any directions. Move the workbench, table, cabinet and equipment to the destination more easily and flexibly.. Mounting Screws Included- We offer 16 screws that is enough for retractable casters installation, but it depends on you whether to install 24 screws or not. Better to make holes in workbench legs with a drillernot included before installing workbench casters.. Casters Workbench Dural Pedal- The workbench casters pedal is framed with powder coating and satin black finish, marked with anti-slip stripes on its surface which means anti-rust and more durable for use. Retractable casters equipped with the wear-resistant urethane casters can work easily..

Upgraded Workbench Casters Constructed with extra thick steel mounting plate and 3 urethane casters, let you easily move workbench, table or furniture up to 880 lbs with a simple push on the pedal mechanism. Easy Operation Stepdown Casters Once casters are installed, simply step on the middle of foot pedal to elevate your workbench off the floor 34 inch and effortlessly move it to desired location. Please kindly note that this lift casters cannot work on rough ground. 360Rotation Casters 360-degree rotation bracket enables workbench casters to transform easily to any directions that you want, you can spend little strength to move workbench, table, cabinet, equipment or displays safely. Non-slip Retractable Casters Each foot pedal is orange powder-coated and with non-slip texture, allow for secure and effective operation while providing extra grip. Side Mounted Caster Kit Set includes 4 mounting plates, 4 swivel urethane casters, 24 mounting screws, 4 mounting nuts, 2 wrenches and a manual for quick install.

WORK ANYWHERE, ANYTIMEThis is an essential feature for a professional craftsman that you may need to carry the table saw to the work site at anytime. We designed the non-slip 8 inch rubber wheels to make it as easy and relaxing as traveling when carrying the table saw.. STURDY AND STABLE ENOUGHThe heavy-duty steel structure and sturdy connection fittings form a very stable frame that is so well balanced that you can completely ignore the table saw stand when you are cutting large woods because its rock-solid stability will not let you perceive the shaking.. THE BEST CHOICE FOR MINI WORKSHOPWORKESS foldable table saw has a compact structure. We also designed a convenient full folding system. lmagine how pleasant it is to put a professional table saw stand into a small space. In fact, you can do it by just pulling the release pin lever.. FITS MOST TABLE SAWSEach base plate has 14 mounting holes two plates in total, providing the flexibility to adjust between a maximum of 20-58 x 18-12 to a minimum of 6-2964 x 18-12 mounting space to flexibly match the table saw you are using.. THE PREMISE OF QUALITY AFTER-SALES SERVICE IS QUALITYWORKESS has BSCI, ISO9001, ISO14001, OHSAS18001 and other quality and safety certification. If you have any problems during use, you can contact WORKESS for the first time. We will provide professional services with engineers to offer you with quality and good after-sales service..

400 LB CAPACITY The Bora Portamate Mobile Base PM-1000 has a weight capacity at 400lbs. 181 kg. Its universal strength makes it ideal to move square or rectangle equipment and heavy tools around your shop or garage. MOUNT MOVE EASILY Make large machinery such as table saws and bandsaws, woodworking equipment, power tools, planers, jointers, shapers, and spindle sanders movable with ease with this strong base. ADJUSTABLE SIZE Adjusts from 12 x 12 inches to 32 x 32 inches square or up to 17 x 48 inches rectangle. The stand is adjustable in 1-inch increments to fit a wide variety of machines. EASY GLIDE LOCKING LEVERS The easy to use foot-operated locking levers lock the steel mobile base firmly into place. When its time to get moving, the 3 inch hard rubber wheels provide a smooth glide. LOW PROFILE This mobile base lifts your machine height by less than 1 inch, adding only a small increase to your working height while allowing your equipment to be completely mobile and moved around as needed.

Heaviest Capacity The Bora Portamate Mobile Base Pm-3500 Has The Heaviest Weight Capacity Of Any Rolling Dolly At 1500 Lbs. 680 Kg. ItS Industrial Strength Makes It Ideal For Larger, Heavier Equipment Like Metal Cabinets, Freezers, Safes, And More. Mount Move Easily Your Largest Machines, Woodworking Equipment, And Power Tools Can All Be Mounted And Moved With Ease, Including Table Saws, Bandsaws, Planers, Jointers, Shapers, And Spindle Sanders. Easy Glide Locking Levers The Easy To Use Foot-Operated Locking Levers Clamp The Steel Mobile Base Firmly Into Place. When ItS Time To Get Moving, The 3 Inch Ball Bearing Wheels And Casters Provide A Smooth, Effortless Glide. Optional Extensions The Bora Pm-3036 Extension Rail Kit Sold Separately Includes Two 36 Inch Extension Rails That Can Be Used To Extend The Size Of Your Pm-3500 To Accept Extra Large Tools.

INCLUDES 1 Foldable Table Saw Stand Rolling Edition. UNIVERSAL Table saw stand is designed to accommodate a wide assortment of different sized table saws from popular and common brands. FEATURES Portable design with a pair of high-traction 8 wheels for mobility, an automatic locking pin release lever for quick and easy folding action storage, plus two adjustable solid steel plates with spaced slots for versatile mounting options. PORTABILITY Compact layout designed for fast setup and hassle-free breakdown and can be stored with or without saw attached vertically or horizontally. WEIGHT CAPACITY Built with a heavy duty steel tubular frame that seamlessly supports an impressive 330lbs of downward force.

400 lb. Capacity The Bora Portamate mobile base kit PM-1100 is customizable to accommodate any machine size footprint and has a weight capacity of 400lbs. 181 kg. Mount Move Easily Your large machines, woodworking equipment, and power tools can all be mounted and moved with ease, including table saws, bandsaws, workbenches, and more. Adjustable Size All types of machinery and other heavy items can be mobile with the PM-1100. Just measure the machines footprint, cut 34 plywood not included to size for the base, then fit the hardware, and youre ready to go. Easy Glide Locking Levers The easy-to-use foot-operated locking levers lock the 3-inch hard plastic caster wheels into place. This kit is perfect for garages, woodshops, workshops, or anywhere you need to make your equipment mobile.

FREE PROVIDED EXTRA CROSS SUPPORT Allow for Miter Saws That The 4 Holes Shape a trapezoid pattern some saws and the 3 holes shape triangular few saws. EXTENDING THE SUPPORT ARMSMiter Saw Stand extends from 45.6 in to 78.7 in. QUICK-RELEASE MOUNTING BRACKETS Allow Easy and Secure Mounting of Miter Saw to Stand. RUGGEDLY BUILT DESIGN330 lbs Load Capacity Adjustable Roller Supports from 35.4 in to 39.3 in. ROBUST RUBBER WHEELS Two 8 in wheels for for convenient transport around the jobsite.

All swivel design allows for easy mobility and maneuvering of equipment in tight spaces. Foot operated locking levers hold the base firmly in place. Adjustable in one inch increments to fit most machines. Heavy duty grade, holds up to 1, 500 lbs.

A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand youll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.. Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5 W x 20 D x 6. 5 H and Weighs only 30 lbs. Without a saw.. Switch gears mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.. Makes the cut our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability..

Three types of support perfect for any application, you can have a roller support, multi-directional ball support, or rigid stationary support.. Fully adjustable - adjusts from 27 to 43-34 686mm to 1.1M, making it ideal for table saws, band saws and similar.. Extra strong with a 300 lb. 136kg capacity it will hold the heavy stuff, and stay stable, with a tough powder coat finish and non-slip feet.. Folds away for easy storage makes it easy to setup and move.. 11 polished steel roller and six-ball multi-directional rollers any type of feed application is handled, as well as stationary support..

650 lb. capacity - its a true heavy duty adjustable universal mobile base. Ideal for large, unwieldy machines and tools - Table Saws, Band Saws, Planers, Jointers, Shapers, Spindle Sanders, and most other stationary power tools. Also perfect for larger cabinets, toolboxes, safes, gun cabinets, and much more. Foot operated steel locking levers with 3 inch non-marring ball bearing wheels and casters. Glides effortlessly, and locks down rock solid with a quick press. Low profile, only increasing machine height one inch. Adjusts in one inch increments - 12 x 12 inches to 36 x 36 inches square, or up to a 20 x 52 inch rectangle. For items that need a larger footprint the K1218 accessory rail kit is available. The kit includes 2 x 18in rails and 2 x 12in rails with necessary hardware.

Adjustable Height From 27-In To 43-In. Highly Visible Edge Guides Keep Work In Place. Eccentric Foot Keeps Stand Stabilized On Uneven Surfaces. Portable, Light-Weight Design Folds For Convenient Storage.

4 12 diameter handwheel, fits 12 shaft. Used on the blade elevation and tilt shafts.. Fits Craftsman 113.xxxxxx model series belt drive contractor saws with 12 diameter shafts.. Replaces Sears Part Numbers 818526, 62689, 820452, 806872. Will not fit older model 113.xxxxxxx saws that have 38 diameter shafts..

Durable steel construction. Easy setup and break down with excellent stability. Designed for easy loading and unloading into and out of vehicle.

Table Saw Rolling Stand.. Table Saw Rolling Stand.. Table Saw Rolling Stand.. Table Saw Rolling Stand.. Table Saw Rolling Stand..

The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw.. Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles.. Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-14 in. depth of cut at 90 and 2-14 in. depth of cut at 45 bevel.. The included 28T Japanese TCT saw blade tungsten carbide tipped blade allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more. For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-14 x 25-316 inch.. The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand.. 3 years limited warranty included.

INCLUDES 4 Swivel Caster Dual-Lock 2-38 inch Urethane Wheels and 4 12-13 UNC Flange Lock Nuts. DESIGN The grey polyurethane caster wheels provide optimal non-marring protection for you floors with a quiet, smooth and shock absorbent rolling performance. HEAVY DUTY Caster feature a premium steel construction delivering industrial strength durability, with a reliable weight capacity of 400 lbs for the complete set. DUAL LOCKING Easily activated by a stepdown caster heavy duty pedal, the double lock mechanism safeguards against rolling and pivoting, while ensuring proper swivel and wheel rotation stability. UNIVERSAL Swivel casters flaunt 360 degree pivoting action - offering functional versatility for an assortment of easy to install applications, including drum sanders, work tables, furniture workbenches, utility carts, shelving units, grills, etc.

Universal design fits nearly every miter saw on the market, including all WEN miter saws. Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage. Sturdy 1-12-inch diameter steel frame elevates your miter saw 33 inches off the ground. Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long. Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty.