- Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way. Saves time and money as compared to an axle replacement. Ideal for Preventative Maintenance that keeps the vehicle in its OE State.

Order Includes 2 x Rear Inner Axle Boot Kit 2 x Rear Outer Axle Boot Kit. Compatible With Polaris Ranger 500 2X44X46X6 2005 Ranger 500 4X4 EFI 2007 Ranger 700 4X4 EFILE 2007 Ranger XP 700 4X4 EFI 2005 RZR XP 4 Turbo 2017-2019 RZR XP 4 Turbo EPS 2016 RZR XP 4 Turbo INTL 2017 RZR XP Turbo 2017-2019 RZR XP Turbo EPS 2016 Sportsman 335 4x4 2000 Sportsman 400 4x4 2001-2005 Sportsman 450 2006-2007 Sportsman 500 4x4 1999-2004 Sportsman 500 4x4 Duse 2001-2002 Sportsman 500 4x4 Ho 2001-2003. Compatible With Polaris Sportsman 500 4x4 Ho Intl 2005 Sportsman 500 4x4 Rpe 2002 Sportsman 500 4x4 Rse 1999-2002 Sportsman 500 4x4 Rse Ho 2001 Sportsman 500 Efi Intl 2006-2007 Sportsman 500 Ho 2006-2008 Sportsman 500 Ho Intl 2006 Sportsman 600 2003-2005 Sportsman 700 2002-2006 Sportsman 700800 Efi 2004-2007 Sportsman Mv7 2005 Sportsman X2 500 2006 Sportsman X2 500800 Efi 2007 Worker 500 1999-2001. Axle Boot Kit OEM Part Number 1350045 1332433 2202904 2203108 2201374 3235776 2201373 3236012 2208154 2208172. We strongly suggest comparing the posted picture to the units that needs to be replaced..

Comes with clamps and grease. For cars and trucks with large shaft. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. Can be installed without removing axle from the vehicle.

Package Includes 2PCS CV Boot with 4 Stainless Steel Clamps 6 Cable Ties.. Length 4.72 inches, Small Port ID 0.78 inches, Calibers 2.55 inch65 mm, 3.14 inch80 mm, 3.54 inch90 mm.. Protection Prevents dust, sand, water intrusion avoids grease overflow from the ball cage.. Compatibility Universal fit for most cars. Simple installation using mounting cone.. Material Made of silicone, waterproof, Dustproof, Excellent wear resistance, High temperature resistance..

Compatibility The dust cover fits both FWD and AWD vehicles, accommodating axle shaft diameters from 19 mm to 24 mm and compatible with various vehicle structural designs. Please carefully verify your vehicle's compatibility before purchase to avoid mismatches.. Primary Function If your vehicle's ball joint dust cover is torn, replace it promptly. Failure to do so may lead to engine damage and shorten engine lifespan. Timely replacement helps maintain optimal rotational performance.. Premium Material Crafted from durable plastic, the dust cover withstands extreme temperatures encountered during vehicle operation. Designed for long-term use in harsh environments, it resists aging and cracking, reducing replacement frequency while providing sustained, reliable protection for the drivetrain.. Cuttable Design Engineered for precision cutting, the dust cover resists fraying or delamination along trimmed edges. After trimming, simply secure it with the included stainless steel clamps for a snug fit, adapting to various installation requirements.. Specifications You will receive 2 universal joint dust boots 4.76 x 3.65 , 4 stainless steel clamps, and 6 zip ties. Installation securely fastens the dust boot to the shaft tube using the clamps, requiring no additional accessories..

Vehicle FitmentUniversal cv joint split boot repair kit Fits For Ford For F-150 2-Door 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 ,For Ford For F-150 3-Door 2005,For Ford For F-150 4-Door 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018. FeaturesThe axle cv joint boot crimp clamp kit ideal for Preventative Maintenance that keeps the vehicle in its OE State. Durable BuildCrafted from high-quality components, cv joint boot repair kit assurances long-lasting performance and a prolonged theoretical support life. Easy InstallationSpecially for outstanding flexibility and durability, it can be easily installed using universal cv boot kit split joint gaiter stretchable replacement, installation cone, or the traditional method. Warm promptPlease double check the year and model and picture and descriptionto make sure the part fits your vehicle and this helps avoid unnecessary hassles.

Part Type CV Boot Kit. Work for Rhino 2.0 Axles only. Easy to install, 100 Fitment Guaranteed. Made of high-strength rubber or TPEE Thermoplastic Elastomer.

Applicable Models This Swing Axle Boot set fits for 1949-1968 Vw, Dune Buggies, Kit Cars, Baja Bugs, and Sandrails. Material Our Black Split Swing Axle Boot Kit is made of Stainless Steel Clamps, Heavy Duty Hex Head Plated Steel Bolts and Nylon-Insert Locking Nuts, with good performance and durability. FunctionTo stop small particles such as dust, sand, and water vapor from entering your car to protect the swing axle. Easy Installation Just put the boots on and tighten the clamps,very easy to complete assemble. Great Service We are committed to providing customers with high quality products and the better price.

Complete Kit This set includes 2 pieces of universal cv boot, paired with 4 stainless steel clamps and 6 cable ties, serving as a full cv axle boot repair kit for damaged cv joint boots. These wear resistant car boot units provide all necessary hardware for cv joint maintenance and replacement work.. Wear Resistant Construction Each cv axle boot is made with high strength flexible material, built to withstand daily driving conditions and protect cv joint components. These split cv boot units maintain their shape and performance, making them reliable for long term use in vehicle axle systems.. Universal Fit These universal cv boot repair kit units fit most car cv axle systems, working as a practical split cv boot repair kit for various vehicle models. The split cv boot design allows for easy installation without full axle disassembly.. CV Joint Protection This cv boot repair kit is designed to shield cv joint components from external debris, keeping joints in good working condition. The boot structure creates a reliable barrier around joints, supporting consistent performance during regular vehicle operation.. Secure Installation Each split cv axle boot repair kit comes with stainless steel clamps and cable ties to ensure a tight, secure fit around cv joints. These universal cv boot clamp accessories hold the boot firmly in place, supporting stable performance during regular vehicle operation..

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

4Pack CV Axle Boot Repair KitThis CV joint boot kit includes 4 durable rubber CV axle boots, 1 reusable CV boot tool cone mounting, 8 stainless steel clamps, and 12 heavy duty plastic zip ties, everything needed to reseal CV joints in one complete CV boot repair kit. Avoid replacing the entire axle or paying high labor costs. Ideal for multiple repairs, backup use, and long term maintenance, offering greater value than a single CV axle boot kit. ?Tear Resistant Rubber CV Boot KitThis high quality flexible rubber CV axle boot is specially designed for long lasting protection, offering excellent resistance to tearing, cracking, deformation, and aging. The CV boot kit forms a tight, leak proof seal that effectively blocks dirt, water, and debris while securely retaining grease helping reduce premature wear, clicking noises, and drivetrain damage. Reusable CV Boot Expander ToolMeasuring 12.4 inches in height with a 4.3 inch wide opening, this lightweight yet durable plastic CV boot tool smoothly expands and guides CV boots into place, reducing the risk of tearing or deformation. It eliminates the frustration of manual installation, protects new boots from damage, and is reusable for faster, safer future repairs. Universal CompatibilityThis CV axle boot repair kit can be trimmed to fit 3 common CV joint diameters 2.32, 2.91, or 3.35, making this kit compatible with a wide range of vehicles, including cars, UTVsATVs, and RVs. One kit works for multiple vehicles ideal for home mechanics, professional workshops, and emergency repairs. Easy To UseApply lubricant to the CV boot expander tool, slide the CV axle boot onto the CV boot tool, align with the CV joint, and push into place. Secure with clamps or zip ties, no need to remove the axle, cut the joint, or use glue. Save time and effort with a straightforward installation.

Universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts.Your constant velocity joints are placed in your front wheel drive car to allow the drive shaft to transmit power, But without proper protection, they are easily damaged. Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located.Please wear gloves to protect your hands during installation. The installation is simple and clear.. CVS18 Universal Split Constant Velocity Gaiter fits most cars as well as some 4x4s and light commercial vehicles, Fits CV joints measuring Shaft 18-34mm - Joint 60-116mm - Length 58-128mm.cut it to the size that fits your vehicle.Of course, if you have adhesive and our clamps to match and fix, the effect will be better.. It is resistant to oil grease, abrasion, grit, extreme of temperature, tear and imapact damage. It is a universal product. The picture includes everything about our product.We suggest that customers check the list and dimensions to see if they match your car before placing an order.

1.Material CV Boot Made of Component Rubber Acid and alkali abrasion resistance, tensile resistance, tear resistance, more durable. Band Made of Stainless SteelPliers Made of Metal.. 2.Package included 4 Piece x Component Rubber CV Boot 8 Piece Stainless steel clamp1 piece Pliers. 3.FitmentUniversal Suitable For 99 of Car,cut it to the size that fits your vehicle.. 4.Save Time and Money as compared to an axle replacement.. 5.Good Working Condition and Easy to Install..

SUPERIOR SPECS FUNCTION CV Boot Kit, Notes The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of todays ATVs and UTVs., Easier to install than most OEM and aftermarket boots., 40 higher tensile strength than conventional CV boot material, suitable for the high joint angles of todays ATVs and UTVs., 50 more abrasion resistant than conventional CV boot material to assure long life in todays harsh. OEM REPLACEMENT 100 New Aftermarket CV Boot Kit built to meet OEM specifications. ENGINEER-TESTED EXCELLENCE All of our wiring products go through a rigorous testing program developed by prestigious engineers to ensure optimal output and performance.. MECHANICS CHOICE Our key to success is selling parts that fit and perform like the originals, which is why beginner and professional mechanics make us their top choice. We offer electrical parts and motors for your car, electric lawn mower, truck, boat, PWC, motorcycle, ATV, tractor or virtually anything you ride or drive.. HASSLE FREE GUARANTEE 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..

Matches OE form, fit and function. One piece neoprene boot. Kit complete with boot, grease, and hardware for complete installation. Hardware matches original design requirements. Application specific for this vehicle.

Durable Material This cv boot repair kit is made of thickened neoprene rubber, oil-resistant and high-temperature resistant for long-lasting use.. Superior Protection The cv axle boot seals tightly to block contaminants and prevent grease leakage, reducing component damage.. Cuttable Design The dust cover allows precise trimming without fraying or delamination along cut edges. Secure it with the included stainless steel clamps for a snug fit.. Complete Kit The cv boot repair kit includes 2 boots, 4 stainless steel clamps and 6 cable ties for secure fixing.. Wide Fit Fits 18-34mm shafts, compatible with most FWD and AWD vehicles like Audi, Cadillac and Chevrolet models..

Compatible Models Our cv boot repair kits are suitable for shaft sizes 19mm-24mm, compatible with Toyota Camry 2007-2011, Toyota RAV4 2001-2015, Scion tC 2005-2016, Scion xB 2008-2015, Toyota Highlander 2001-2009. High-quality Rubber These CV joint boot kits are made of high-quality silicone with grease on the surface, wear-resistant and high-temperature resistant, highly flexible and elastic, and can fit perfectly. Protective Effect Our universal joint dust kits can effectively prevent small particles such as dust, water vapor, sand, etc. from entering the universal joint, reduce friction and wear, and extend the service life of the universal joint. Easy to Install These universal CV boots are installed on the CV joints of designated vehicles. There is no need to disassemble the joint itself during installation. It can be directly replaced. The telescopic design can adapt to universal joints of different sizes. Item List Our universal joint dust boots include 2 CV joint dust covers, 4 pcs clips, 4 pcs C-clip, it is strongly recommended to have professionals install this part.

Universal compatibility Designed to fit a wide range of car models, this universal split gaiter cv boot repair kit can be used as a replacement for damaged or worn-out constant velocity joint boots.. High-quality material Made from durable and stretchable material, this gaiter is designed to withstand the rigors of constant velocity joint movement, ensuring longevity and reliability.. Split joint design The split design allows for easy installation without the need to remove the CV joint, making it hassle-free and time-saving.Each tool in the kit is ideally suited for easy maneuvering in the confined space where the isokinetic gimbal is located.. Protective function This CV joint boot provides crucial protection to the constant velocity joint, preventing contaminants like dust, dirt, and moisture from entering and causing damage, thereby extending the joint's lifespan.. Cost-effective solution Compared to replacing the entire constant velocity joint, using this split gaiter cv boot repair kit is a cost-effective solution, allowing you to repair and maintain your vehicle without breaking the bank..

UNIVERSAL FIT ADJUSTABLE DESIGN This CV boot repair kit fits shaft sizes from 18mm to 34mm and features cuttable calibers for both small and large ends, ensuring compatibility with most vehicles. Ideal for replacing torn or damaged CV boots or axle boots.. PREMIUM MATERIAL DURABILITY Made of thickened neoprene rubber or silicone, this CV axle boot kit offers excellent wear resistance, flexibility, and high-temperature performance. Built to outperform standard split CV boot alternatives in durability and seal retention.. FULL PROTECTION AGAINST CONTAMINANTS The CV axle boot acts as a barrier to block dust, water, mud, and road debris from entering the joint, while retaining grease. This CV joint boot ensures smoother operation and extends the service life of your drivetrain.. EASY INSTALLATION COMPLETE KIT This CV axle boot repair kit includes 2 CV boots, 4 stainless steel clamps, and 6 cable ties. Designed for quick DIY or professional installation without axle removal - compatible with cone tools or pneumatic CV boot installers.. RECOMMENDED MAINTENANCE ITEM Regularly inspecting and replacing worn CV joint boot kits helps prevent costly damage. This CV boot kit is essential for maintaining your vehicle's performance and is suitable for both front and rear CV axle boot applications..

Specifications The CV axle boot measures 4.74 inches in length, have the top opening inner diamter of 0.81 inches, and fits universal joint with 2.32 inches 2.86 inches 3.46 inches calibers.most vehicle models compatible. Package Contains Our CV joint boot repair kit package contains 2pcs of CV boot, 4pcs stainless steel clips, 1pcs CV boot expander tool and 6pcs nylon cable ties. You simply remove the old or worn CV boot, and then use the mounting cone to put the new CV axle boot into the axle.. Excellent Protection CV axle boot kit fits snugly into the CV joints on the vehicle's drive axle, effectively blocking the intrusion of dust, water and other impurities, providing all-around protection for the ball cage and prolonging its service life.. Stable and Durable CV boot repair kit is made of elastic silicone material with excellent aging and abrasion resistance, even in high temperature and other harsh environments, it can maintain good elasticity and stability. The softness and elasticity of the silicone allows the CV boot to fit tightly and not loosen or fall off due to the vibration of the vehicle.. How to Use Simply flip the boot over, push it into the open end of the CV boot expander tool, align it with the gimbal position, and then push the boot firmly so that it gradually covers the gimbal, secure the CV boot clamp at the opening connection..

SpecificationsAxle boot length4.73inch Top small port ID0.79inch Three caliber sizes2.36inch60mm,3inch76mm,3.46inch88mm.Please carefully confirm size suitability before purchasing. Ensure the purchased size meets your needs.. Premium MaterialsMade of high-quality elastic silicone with good wear resistance and toughness, withstanding harsh conditions and performing excellently for long-term use.. CompatibilityGeneric Silicone Constant Velocity CV Axle Boots.Universal car accessory that is suitable for most vehicle models, meeting your needs for repair and protection of constant velocity joints.. WaterDust ProtectionTightly fit with the CV joint on the vehicle drive shaft,effectively prevent the intrusion of dust,water and other impurities.Avoid grease spillage from the ball cage.Ensure good operation and extend the service life of the vehicle drive shaft.. Package Contains2pcs CV Boot,4pcs Stainless Steel Clamps2pcs small and 2pcs large,6pcs Nylon Cable Ties.Use a dust boot to protect your CV axle without delay..

Matches OE form, fit and function. One piece neoprene boot. Kit complete with boot, grease, and hardware for complete installation. Hardware matches original design requirements. Application specific for this vehicle.

SpecificationsExpander tool height13inch Bottom IDOD4.04inch4.30inch Axle boot length4.73inch Top small port ID0.79inch Three caliber sizes2.36inch60mm,3inch76mm,3.46inch88mm.Please carefully confirm size suitability before purchasing. Ensure the purchased size meets your needs.. Premium MaterialsMade of high-quality elastic silicone with good wear resistance and toughness, withstanding harsh conditions and performing excellently for long-term use.. CompatibilityGeneric Silicone Constant Velocity CV Axle Boots.Universal car accessory that is suitable for most vehicle models, meeting your needs for repair and protection of constant velocity joints.. WaterDust ProtectionTightly fit with the CV joint on the vehicle drive shaft,effectively prevent the intrusion of dust,water and other impurities.Avoid grease spillage from the ball cage.Ensure good operation and extend the service life of the vehicle drive shaft.. Package Contains1pc Expander tool,2pcs CV Boot,4pcs Stainless Steel Clamps2pcs small and 2pcs large,6pcs Nylon Cable Ties.Use a dust boot to protect your CV axle without delay..

Matches OE form, fit and function. One piece neoprene boot. Kit complete with boot, grease, and hardware for complete installation. Hardware matches original design requirements. Application specific for this vehicle.

Silicone Material This CV axle boot is crafted from flexible silicone, resisting temperatures and wear, maintaining shape to seal CV joints and protect shafts from debris during daily driving or off road use.. Universal Fit This CV boot repair kit fits most front wheel drive and all wheel drive vehicles, compatible with common car truck and SUV models without custom adjustments.. Complete Kit This CV joint boot kit includes 2 universal CV joint boot covers fit for shaft diameter 0.75 inch to 0.94 inch, 4 stainless steel clamps, and 6 cable tiesall essentials for full CV axle repair and maintenance.. No-opening Installation This external ball cage repair kit features a turn up boot shaft design, enabling easy installation with included tools without disassembling the axle, saving time and mechanical effort.. Protective Function This CV boot kit seals and shields CV joints and drive shafts, preventing external elements from affecting performance, ideal for maintaining front drive shaft integrity and vehicle safety..

Endurance Property Made of enduring silicone material with good endurance and flexibility to resist wear and environmental impacts and extend the life of the CV joints. Wide Compatibility Suitable for a wide range of automotive applications, this CV joint boot provides flexible protection for different vehicle models, ensuring that your vehicle maintains good performance in all driving conditions. Enhanced Sealing Designed with good sealing performance, it effectively prevents lubricant leakage and ensures that CV joints are always well lubricated, reducing wear and the risk of failure. Lightweight Design The lightweight design of the boot not only reduces the burden on the suspension system, but also improves the vehicle's fuel efficiency. Easy Installation Design The boots are designed for quick and easy installation without professional tools, suitable for DIY enthusiasts and professional technicians, saving time and energy.

Complete With Deluxe Installation Hardware. Wide Stainless Steel Clamps. HD Hex-Head Plated Steel BoltsNylon Lock Nuts. HD Hex-Head Plated Steel Bolts.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Compatible With This CV boot repair kit is compatible with 19mm to 24mm shafts and works with Toyota Camry, Highlander, and other vehicles requiring outer CV joint protection.. Replace OE The cv axle boot repair kit replaces damaged or worn CV axle boots and serves as a universal substitute for split CV boot replacement on front outer velocity joints.. High Quality The cv joint boots kit are made of flexible, high-temperature resistant silicone material, and include durable stainless-steel clamps and nylon ties for secure installation.. Function This split cv boot repair kit restores the seal around the CV joint to prevent grease leakage, block dust and water intrusion. Package include The package includes 2 split CV boots, 4 stainless steel clamps, and 6 nylon cable ties..

Application Range Universal CV Boot Repair Kit fits for shaft measurements ranging from 19 - 24mm, including 1 CV boot,1 Large Clamp,1 Small Clamp Being crafted from stretchable materials, It's also commonly referred to as an axle boot repair kit or CV joint boot kit. Material Constructed from high - performance NBR rubber, our CV Axle Boot is highly durable and resistant to harsh conditions You can use it for cv joint boot applications or as a general cv boot for your vehicle. Installation Guide view it on the bottom videoFirst, remove the old cv boot by pulling it straight off the axle Then, align and slide the new boot onto the axle using the mounting cone Finally, secure it with a cv boot clamp. Compatibility Compatible with most vehicles including cars, 4x4s, and light commercial vehicles, our Universal CV Axle Boot offers universal compatibility and top - notch protection, whether you need a cv axle boot kit or a cv joint boot kit, this product is designed to meet your needs. Maintaining a simple 30 - second weekly check for your cv axle boot Look for any signs of aging or deformation such as cracks, bulging, or worn - out rubber. Tighten any loose cv boot clamps, as they play a vital role in preventing leaks.

Universal Fit Stretchable boot 4.76 long suits 2.39, 2.86, and 3.56 shafts trim excess and secure with clips ties.. Sealed Protection Blocks dust, water, and debris to safeguard CV joints and extend lifespan.. Heat Wear Resistant Flexible silicone material maintains durability in high temps and harsh conditions.. Timely Replacement If your CV boot clicks or leaks grease, replace it promptly to prevent further damage.. Package Include 2 pcs split CV boot, 4 pcs stainless steel clips, and 6 pcs nylon tiesfits 19mm to 24mm shafts for easy installation..

EMPI CV Joint Boot Kit 86-2340-D. Comes complete with Boot, stainless Steel Clamps, Grease, and Installation Instructions. Compatible with Volkswagen Golf 2015-2017 1.8L Automatic Trans 2.0L Manual Trans, Outer.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Part Type CV Boot Kit. Manufacturer Part Number BK00-001. Designed to work for Rhino 2.0 Axles only. Includes 1 Boot, Clips, Clamps And Grease. Made of high-strength rubber or TPEE Thermoplastic Elastomer.

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Package Includes 2 x CV boots, 4 x clamps, 6 x cable ties, 1 x cone.. CV Joint Boot Kit can be used for constant velocity CV joint boots, ball head dust covers, dust covers, tie rod end, track rod end.. Easy to Install, no need to remove the universal joint, just put the kit on.The boot can adapt to different sizes of universal joints, convenient for users to place.. This CV Joint Boot kit can prevent the prevent the intrusion of dust, sand and water vapor, reduce internal friction and wear, and ensure the service life of the universal joint.. Fitment fits for various assemblies including CV joints, ball head dust covers, and tie rod ends, making them a choice for numerous applications in your vehicle..

Fits 13101330 U-Joints on Double Cardan Joint CV Driveshaft. Non-Greasable. 0.760 Wide x 1.94 Outside Diameter.

Specifications Axle boot is 4.72 inch in length and small port inside diameter is 0.78 inch, and contains three different calibers 2.55 inch65 mm, 3.14 inch80 mm and 3.54 inch90 mm. Please check the size data you need before purchase. You Will Get 2 CV joint boot, 4 stainless steel clamps and 6 cable ties. Suitable for most vehicles. Installation is simple, you simply remove the old or worn CV boot, and then use the mounting cone to put the new CV axle boot into the axle. Excellent Protection The CV axle boot acts like a sturdy shield, providing full protection. It can effectively prevent the intrusion of dust, sand, water and other impurities, and at the same time, avoid the overflow of grease from the ball cage. Good Quality Made of quality silicone material, with excellent wear resistance, high temperature resistance. The softness and elasticity of the silicone allows the CV boot to fit tightly and not loosen or fall off due to the vibration of the vehicle. Maintenance In the daily maintenance of the vehicle, the CV axle boot should be regularly checked for signs of damage, cracks, aging, deformation, and whether the fixed devices at both ends are loose. If any damage is found, it should be replaced in time.

Ideal Fit for T1 Bug The Split Axle Boot Set is specifically designed for T1 bug variations from 1962 to 1979 with swing axles. Ensure compatibility by checking the OE number 111598021A before purchase to avoid returns and ensure a ideal fit for your vehicle.. Superior Protection This Swing Axle Boot Set provides comprehensive coverage for the drive shaft and joint components. It effectively protects against dust, sand, water exposure, and other external contaminants, ensuring long-lasting performance and reliability.. High Quality Material Crafted from durable and wear-safe materials, the Rear Swing Axle Boot offers exceptional strength and longevity. Its robust construction ensures it can withstand harsh driving conditions, providing reliable protection for your vehicle.. Easy Installation The Rear Axle Swing Split Boot features a straightforward installation process that saves time and effort. With minimal tools and no complex steps required, you can quickly and easily install this boot, making it a convenient choice for any DIY enthusiast.. Complete Package This Split Axle Boot Kit includes everything you need for installation 1 dust cover, 2 clamps, and 6 screws. Each component is designed to work seamlessly together, ensuring a effortless installation and optimal performance for your T1 bug..

For Front or Rear Assembly These CV joint boots are versatile and can be used for constant velocity CV joint boots, ball head dust covers, tie rod ends, and track rod ends.. Durable Material Made from high-quality silicone, these universal CV joint boots are to high temperatures and wear, effectively protecting the universal joint from external damage.. These CV joint boots effectively prevent dust, sand, water vapor, and other small particles from entering the CV joint, reducing friction and wear, and extending the service life of the universal joint.. High Accuracy With precise sizing and appropriate elasticity, these CV joint boots fit perfectly on car CV joints and can be tightly enclosed around the universal joint without loosening.. Easy to Use The CV joint boot is very convenient to install without removing the universal joint. The telescopic design of the boot can adapt to different sizes of universal joints, making it easy for users to place..

Bailcast's universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts.. The Bailcast's gaiter boot is designed to fit almost any vehicle due to its universal form and stretchable materials cut it to the size that fits your vehicle.. Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located.. It is resistant to oil grease, abrasion, grit, extreme of temperature, tear and impact damage.. CVS18 fits most cars as well as some 4x4s and light commercial vehicles, Fits CV joints measuring Shaft 18-34mm - Joint 60-116mm - Length 58-128mm.. Can be fitted to trilobaltripod joints, follow the simple step by step instructions found printed in the box or below - This boot is aimed more at the DIY mechanic and, as the name suggests, has a tongue and grove split running its full length,Once in position the split joint is glued using the special rubber adhesive that is included in the kit, making a strong durable join..

Specifications Axle boot is 4.72 inch in length and small port inside diameter is 0.78 inch. Please check the size data you need before purchase.Installing our CV joint boots is a breeze. No need to remove the universal joint simply slip the kit on.. Dust and Debris Protection Keep your CV joint functioning optimally with our dustproof CV joint boots. The CV axle boot prevent the intrusion of dust, sand, and water vapor, reducing internal friction and wear, and ensuring the longevity of your universal joint.. Durable Silicone Material Crafted from premium silicone, our CV Boots offer superior heat and wear resistance. This material effectively shields the universal joint from harmful external elements, prolonging the life of your vehicle's suspension system.. High-Precision Fit Our CV joint boots are manufactured with high accuracy, featuring the right size and elasticity to fit snugly around your car's CV joint. They provide a secure, tight enclosure that won't loosen over time, maintaining optimal performance.. Universal Compatibility Our 2pcs CV Joint Boot Kit is designed as a Universal Split CV Boot, ensuring a perfect fit for various car models without the need for specific parts. This high-flexibility design covers both front and rear assemblies, providing a versatile solution for constant velocity CV joint protection..

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.MaterialNeoprene. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.MaterialSilicone. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Fits shaft size 19mm-24mm. - Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way. - Save Time and Money as compared to an axle replacement.. - Ideal for Preventative Maintenance that keeps the vehicle in its OE State.

Saves time and money as compared to an axle replacement. - Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. Ideal for Preventative Maintenance that keeps the vehicle in its OE State. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way.

Premium MaterialCV axle boot is made of silicone with good elasticity and toughness, fits tightly into the CV boot, withstand pressure and friction during use without being easily damaged, water resistant and durable, withstands the effects of harsh environments to keep long time use.. Product DimensionThe axle boot measures 4.74 inches in length, have the top opening inner diamter of 0.81 inches, and fits universal joint with 2.32 inches 2.86 inches 3.46 inches calibers. Please check size suitability carefully before purchase.. Dust and Water ProofCV axle boot kit fits snugly into the CV joints on the vehicle's drive axle, effectively blocking the intrusion of dust, water and other impurities, providing all-around protection for the ball cage and prolonging its service life.. Universal CompatibilityOur CV boot repair kit are suitable for shaft sizes from 19 mm to 24 mm, is a universal car accessory that fits a diverse range of vehicles. From sedans to SUVs, pickups to ATVs,this kit is the go-to solution for all your CV boot fastening needs.. Easy to InstallApply some grease to the CV axle, install our CV axle boot on the opening of the expender tool, and then align the CV axle and push the CV axle boot hard so that it completely covers the CV axle, and securely fasten it to the CV axle using the cable ties and clamps.. What You ReceiveYou will receive 2 CV joint boot, a pair of gloves, 1 expander tool,1 CV clamps,4 stainless steel clamps and 6 cable ties. Suitable for shaft size 19mm-24mm.A full range of accessories to make your maintenance and repair work more easily..

Matches OE form, fit and function, for Vintage Air Cooled VW and Porsche Applications ONLY. Quality construction for durability. Designed for under vehicle environment. Application specific for this vehicle for the vehicles cataloged, NOT UNIVERSAL. Confirm Application Before Ordering.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Order Includes 2x Inner CV Boot Kit , 2x Outer CV Boot Kit. Compatible with Suzuki Models Quadrunner 4WD LT-4WD 1987-1998 , King Quad 300 LT-F4WDXS 1991-1995, King Quad 300 LT-F4WDX 1993-1997, Quadrunner 4WD LT-F4WDW 1997. Part Number Inner CV Boot Kit 54931-19B14, 54931-19B13. Part Number Outer CV Boot Kit 54930-19B12, 54930-19B11. We strongly suggest comparing the posted picture to the units that needs to be replaced..

1.Material CV Boot Made of Silicone Band Made of Stainless SteelPliers Made of Metal. 2.Size 130mm height, OD 95mmPlease check the photo shown. 3.Package included 4 Piece x Silicone CV Boot 8 Piece Stainless steel clamp1 piece Pliers. 4.Save Time and Money as compared to an axle replacement.. 5.Fitment Universal For Car,Trucks, SUV,ATV, Quad Bikes.....

VERSATILE APPLICATION Our CV joint boots are compatible with a range of components such as constant velocity CV joint boots, ball head dust covers, and tie rod ends. Enjoy the flexibility of use for both front and rear assembly. PREMIUM SILICONE MATERIAL Made from premium silicone, our universal CV joint boots offer high temperature and wear your universal joint from external damage with this material. EFFECTIVE DUSTPROOFING Prevent dust, sand, and water vapor from infiltrating your CV joint with our protective boots. By reducing friction and wear, they help extend the service life of your universal joint for optimal performance. CONVENIENT INSTALLATION Easily install our silicone CV joint boot without the need to remove the universal joint. With a telescopic design that adapts to various universal joint sizes, users can effortlessly place the boot for a hasslefree experience. PRECISION FIT Our constant velocity joint boots feature accurate sizing and appropriate elasticity to snugly fit car CV joints. Ensuring a secure enclosure around the universal joint without any looseness, experience a and fit.

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.MaterialPolyurethane. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Precise Fit for Many Vehicles Engineered to fit shafts from 22mm to 28mm, this CV boot kit offers broad compatibility. Such as CHEVY GMC NI-SS-AN H-ON-DA and more models A reliable replacement solution for many cars, SUVs, and trucks. Superior Protection with Durable Rubber Crafted from premium, heavy-duty rubber designed to resist abrasion, oil, and harsh conditions. Effectively shields CV joints from damaging dust, water, and road debris for reliable protection. Simplified Installation Saves Time Features a convenient split design allowing boot replacement without full driveshaft removal. Complete CV Boot Kit Includes 1 x CV joint boot, 2 x stainless steel clamps, 1 x g-lu-e, 1 x g-rea-se, 1 x c-utting tool and a pair of gloves. Buy with Confidence Comes with 12 months w-arran-ty.

PRODUCT SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness. USEFUL TOOL Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten You can install it in a few minutes. WIDE APPLICATION Used on drive CV Axle, work well with your cv boot kit such as atv's and utv's cv boots A perfect replacement for your loose or broken cv boot clamp. PREMIUM MATERIAL This 24pcs cv joint clamp is made of high quality 304 stainless steel, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life. AFTER-SALES DESCRIPTION If you have any questions about the purchased tool, please contact us in time, customers satisfaction is our top priority.

Precise Fitment The CV boot Kit is suitable for 22mm to 28mm shafts. Engineered to suit most carsSuvTruck, this gait protection cover replacement part offers broad compatibility. Perfect for restoring constant velocity joint functionality across various vehicle models. Essential Axle ProtectionMade with premium heavy-duty rubber, resisting abrasion, oil, and extreme conditions. Shields CV joints from dust, water, and debris, ensuring long-term durability. Easy to installThe split design allows you to replace the boot without removing the driveshaft, saving time and labor costs. Complete CV Boot Kit Includes 1 x CV joint boot, 2 x stainless steel clamps, 1 x g-lue, 1 x g-rease, 1 x c-utting tool and a pair of gloves. Buy with Confidence Comes with a 12 month w-arranty.If the replacement parts of the universal joint gait protection cover are damaged, please contact us and we will provide a timely solution. After receiving the kit, please carefully check whether the parts are complete.

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

EMPI 86-2348D.