1. A traditional classic model flux paste, using hydrogenated rosin for and a variety of active agents made of high-temperature mixing.. 2. Halogen-free, viscous general, yellow color, transparent residue after welding.. 3. To help soldering quickly on the tin, reduce the damage to the components of high-temperature welding, BGA tin planting can stick to the tin ball, so that the solder joints full, bright.. 4. Used for conventional components welding or desoldering circuit board components.. 5. Each support solder paste net content of 10ML. Each support solder paste with 5 push rod and 10 needles..

Quantity and size package contains 3 pieces soldering pens, enough quantity for meeting your daily usage and replacement Each soldering pen measures approx. 5.6 inches in length. Safe to use these pens are made of quality material, no leak and safe to use Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering No residue will interfere with electrical testing. Useful and practical no clean soldering pen is a novel tool for rework and repair welding It allows controlled application of flux, thereby removing dirt in the flux bottle Pen tip of 10 ml with practical designed felt tip The solid content is low and there is almost no residue. Wide application the pen is suitable for automotive, computer, work for rework, and through hole solder joints It is lightweight and would not occupy too much space, suitable pocket size to carry. How to use before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean soldering pen to remove the oxidizing wax After that, you can use the alcohol to clean the pen.

Ideal for electronics soldering, repair rework. For Lead Lead free applications. Contains 2 ounces in a 3 Dia x 0.62 H Can. RoHS Compliant with SGS Report. No Clean Flux.

Paste Content Alloy Tin 42 Bi58 , Sloder Flux Content 10.5. Product Parameters Total Weight 29g, Net Weight Of Paste 20g. Paste Features No Clean, Strong Viscosity, Bright Welding Point. Product Advantages Pushing design for Smoother Flowing, No Waste During Welding. Applications Widely Used In Circuit Board, IC, Phone, TV and Other Household Appliances and Industrial Equipment.

Water-soluble paste wont leave residue in water piping. Meets industry standard ASTM B813 and contains no zinc chloride to reduce corrosion concerns. Non-acid, non-toxic, and lead-free to eliminate safety concerns. Cleans pipe upon application, allowing solder to run more smoothly around the pipe. All-weather formula for use in hot and cold climates. Meets ANSINSF Std. 61 specifications for Potable Water use..

Novacan Old Masters Flux. All-purpose zinc flux. Cleans up easily with water. 8 oz.

All-purpose flux specially formulated for stained glass use. Includes an application brush Goes on easy without being runny or sloppy.. Completely water-soluble, making clean up quick and easy. Can be used with zinc, lead and copper foil. Wash all work within 6-8hrs.. Made In The USA.

For leaded and lead-free solder. Fast wetting. Non-corrosive. Non-hygroscopic. RoHS compliant.

Package includes you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement. Suitable size the rosin flux pen measures about 14.3 cm 5.6 inches in length, and the solder braided wick is about 1.5 m 59 inches long and 2.5 mm 0.1 inches wide, which is convenient to hold in hand Please check the size carefully before purchasing. Quality material these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents. Practical tools 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards. Wide applications these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.

The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more. 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs. This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.. The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency. The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.

What can you get the package includes 5 pieces of no clean solder flux pens, enough quantity providing you a wide choice for daily life use and replace. Proper size the soldering no clean flux pen measure approx. 14.3 cm 5.6 inches in length, please check the size carefully before purchasing. Reliable and quality material the liquid soldering pen is made of reliable materials and no leak and safe design for protecting the flux, keep you from touching the organic solvents. Wide applications these flux pens can be applied for laboratory, computer, telecommunications, home repairs, bringing a lot of convenience to your work. Simple operation you only need to press the pen tip 1-2 times to release the liquid, and after use, the flux pen can be cleaned with alcohol.

Lead-Free RoHS Compliant.

Solder Flux.

Kester 1544 Liquid Flux Repackaged by CML Supply in this convenient dispensing bottle. Lead Free - RoHS compliant.. Compatible with Lead and Lead-Free Solders. 2-ounce bottle. Activated Rosin Formula.

High thermal stability for soldering multi-layer assemblies which require higher temperatures. High preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. Improves soldering performance. 2-Ounce Bottle. Eliminates the need and expense of cleaning.

For leaded and lead-free solder. Fast wetting. Non-corrosive. Non-hygroscopic. RoHS compliant.

Liquid flux is used with solid wire solder. Made for non electrical soldering of copper, brass, galvanized iron and steel. Also used for nickel alloys and nickeltin plate. Completely water washable excellent for easy clean up. Bottle contains 4 ounce fluid. Liquid flux for non electrical soldering of copper, brass, galvanized iron, steel, nickel alloys and nickeltin plate. Used with solid wire solder. Completely water washable. Excellent for easy clean up. Bottle contains 4 ounce fluid.