Bi-direction PD Fast-Charging The highly integrated BMS intelligent chip of SmallRig V-mount battery VB99 Pro supports a wide range of mainstream fast charging protocols such as PD QC PPS etc.. It supports high power USB-C bi-directional PD fast chargedischarge up to 100W, fully charged in 2.5 hours. Equipped with split circuit design, fast charging no slowing down. The output power will not be reduced when charging multiple devices at the same time total no over 100W.. Multiple Interfaces This V mount battery comes with two USB-C A USB-A, DC 5.5x2.1mm 8V, DC 5.5x2.5mm 12V, BP and D-TAP ports, which are more versatile and support powering multiple devices simultaneously, such as DSLR camera, camcorder, monitor, smartphone, wireless video transmitter, tablet and laptop, etc. It also has a 14-20 38-16 threaded hole on the V-Lock, you can hold it with a ball head or other clamp.. Sufficient V-mount Battery SmallRig V mount battery 4292 with high capacity of 6700mAh99Wh14.8V, built-in premium Li-battery cell endures repeated charging and discharging, to bring powerful battery life for long video making and photography projects, good power backup solution for photographers and filmmakers. The battery includes a 240W USB-C charging cable for faster, more stable charging. Upgrade your charging experience with reliability and efficiency.. Safe Reliable This V mount battery features LG power battery cells to provide more stable charging and discharging cycles. And its customized intelligent BMS system ensures faster and safer charging by providing multiple protections against over-current short-circuit over-temperature over-voltage etc, so you don't have to worry about damaging your camera and devices. This battery has passed the certification of FCCCERoHSISEDRCMPSEKCMSDSUN38.3IEC62133UL2054UL62368, more safe and reliable.. Status at a Glance On the front of the SmallRig V-mount battery is a bright, crystal clear TFT color display, conveniently gives you an accurate reading of each port and total output power. Monitor battery life and power output in real time to stay in control. Note The side status button is only used to wake up the screen and check the battery condition, cannot turn off the battery.. Mini Portable V Mount Battery Palm-size of Length 4.2 2.9 2.2 inches, only 23.3 oz, approximately 30 smaller than traditional V-mount batteries, airline friendly feel free to carry outside and travel. With dust cover fixing groove, say goodbye to the annoying loose dust cover, no longer need to pull it off when wiring, more tidy. And Its shell is made of sturdy, drop-proof aluminum alloy and fireproof PC and features durable, scratch-resistant PC and acrylic cover on the front.. If your battery encounters problems such as OLED screen not displaying, not charging and discharging properly, or draining abnormally fast, etc. you can contact us at any time..

Palm-size with Maximum Power for AviationWith 99Wh of the large capacity, Moman Power 99 V-Mount battery has the maximum power allowed to be carried on the plane, yet it is minimized to be palm size only with 4.9cm thickness and 530g weight, fitting well into most of v-mount fixtures, portable for on-the-go shooting with palm size.. Reliable Battery Cores, Better EperienceMoman Power 99 is designed with Unique Balance Cell Algorithm, tuning each battery cell to same voltage level during charging discharging process to ensure a recycle life well beyond that of comparable batteries, up to 1000 times.. 65W USB-C Quick ChargeWith the upgrade on 65W USB-C slot, you can charge Moman Power 99 through BP or D-tap traditionally with large adapter or simply with USB-C Cable includedthat share the same charger with your smartphone, tablet or laptop, skipping the hassle of bringing tons of batteries and chargers.. 200W Output for Multiple DevicesWith Maximum Continuous Current rating up to 15A, Moman Power 99 is powerful enough for 200 Watts multiple devices simultaneously during your shoot, which means you no longer need to change the battery every hour.. Various Output for Filmmakers Moman Power 99 provides two D-Tap and two USB-A output to power various camera gears including camcorders, field monitors, image transmitters, even charging tablets, smartphones and other mobile devices during your trip..

6800mAh Rechargeable Battery With a 6800mAh capacity 99WH14.54V, this lithium battery provides strong power for extended video shooting or filmmaking, including 7.7 charges for Canon EOS R5 C, 5.8 charges for iPhone 14 Pro, 3.3 charges for iPad Pro 12.9 2022 tablet, 1.5 charges for MacBook Pro 14 2022 laptop, and a 1.5h power supply for MS60C LED Video Light. It can be fully charged in 3h using a 16.8V D Tap charger or a PD fast charging GaN charger set not included. V Mount Battery with Multiple Ports With dual USB A and USB C, 5.5x2.1mm DC 8V 5.5x2.5mm DC 12V ports, BP and D Tap interfaces to simultaneously charge multiple devices like DSLR cameras Compatible with Canon Sony Nikon BMPCC 4K 6K Cinema Cameras, field monitor NEEWER F500, compatible with Atomos ninja v, LED video lights, laptops, tablets, phones, V mount battery plates ST43, PS003, PS005. Also comes with dust covers to protect the ports. PD65W Bidirectional Fast Charging Seamlessly supports PD3.0, QC2.0AFCFCP, QC3.0, SCP, DCP-1.5A, PPS, 5V 2.4A for APPLE charging protocol, and more fast charging protocols. The USB C port delivers a maximum 65W two way PD fast charging for your smartphones, tablets, or laptops with a 65W PD charger and cable both not included, compatible with iPhone 15 Pro Max 15 Plus 14 Pro Max 13 Pro 13 Mini Samsung S22 S23 Ultra Huawei Mate 60 Pro P60 P40 Pro, etc. Intelligent Battery Management System Proudly certified by CEUKCAPSERCM, this V mount battery features an intelligent battery management system BMS that automatically protects against short circuits, over voltage, over current, overcharging, and over discharge, and even sends timely alerts in case of over power, over current, over voltage, over temperature, and under power discharge. The fireproof PC V0 shell for enhanced safety and durability. Portable Airline Friendly Palm sized at 4.4 x 2.9 x 2.2 111 x 73 x 56.7mm, and weighing just 1.3lb590g, airline friendly and never adding bulks to your luggage. The 1.12 OLED screen provides real time battery status all at a glance, the power switch saves energy, and the non slip pads on both sides for secure handling during use. If no connection while charging R5R5 CR6R7, just turn off the camera, unplug all cables, reinsert the battery, then resume charging.

Versatile and Compact Design SmallRig V-mount battery plate 4064 adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 14-20 threads to realize quick installation and adjustment of camera and battery. Folding and lightweight design, only 117?mm x 31.5?mm, 230g, easy to store and carry round.. Stretchable Baseplate The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5?mm 1.43?inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools.. Double Quick Release Plate for Arca-Swiss Its bottom is equipped with a 14 -20 and 38 -16 quick release plate for Arca-Swiss, which can quickly switch among handheld shooting, gimbal shooting and tripod shooting. And the included quick release plate for Arca-Swiss allows the camera to be quickly connected to the kit.. Not Block Camera Screen You can flip the V-mount battery plate down 90 degrees through the thumb lock on the side, so that you have enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling.. Variety of Power Solution Options This V-mount battery Plate has a mini V-mount plate with 14 -20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate and power bank holder, thus realizing more diversified battery solutions..

Replacement Battery for Sony NP-FZ100 The battery is suitable for Sony Alpha A7 V, A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II. Fully decoded battery, you don't need to worry about the warning pop-up that the battery will damage the camera.. Rapid 2.5-Hour Charging This battery has a USB-C charging port, with high current charging 5V2A, you can have a full battery in 2.5H. And it comes with a charging indicator to clearly show the charging progress. Red indicator for charging, green indicator for fully charged.. Sufficient Battery Capacity with 100 true 2400mAh capacity, this battery power for Sony A7V through 3.8-hour shoots or 680 of shots. USB-C rechargeable camera battery supports wall outlets, car chargers, power banks, and for Sony BC-QZ1 chargers.. Pro-Grade Safety by Design Built with Top-tier Li-ion cells and 6-layer protection overchargeovervoltageovercurrent. Operates flawlessly from 0C to 45Ctrusted for outdoor film production in harsh environment.. Instant-Read Color Coding Stand out with the vibrant orange shell. Spot your battery instantly in crowded gear bags, perfect for wedding photographers..

POWER THROUGH LONG SHOOTS WITHOUT INTERRUPTION With a high-capacity 148Wh design, the XCell 150 keeps cameras, monitors, and accessories running for hoursno mid-shoot swaps or power anxiety, even on the most demanding production days.. KNOW EXACTLY WHEN TO SWAP, NO GUESSWORK The ColorID OLED display shows real-time battery percentage and remaining runtime down to the minute. Wrapped in Gorilla Glass, it's readable and reliable in any environment.. STREAMLINE YOUR SETUP WITH VISUAL COLOR ID Assign one of five color themes to quickly identify batteries across crews or cameras, and upload your company logo for display at startupideal for workflow organization and asset management.. POWER EVERY PIECE OF GEAR FROM A SINGLE SOURCE From DSLRs to wireless transmitters and follow-focus motors, dedicated 8V, 12V, P-Tap, and USB-C PD outputs let you run your full rigwithout converters, splitters, or extra clutter.. BUILT FOR THE FIELD, READY FOR ANYTHING Engineered with rugged materials, airline-approved, and smart-system ready, the XCell 150 delivers intelligent, all-day power that travels as hard as you shoot..

Versatile Compatibility Designed for Canon R50 V R5 Mark II R5 R50 PowerShot V1, this cooling fan also supports for Sony cameras like ZV-E1, ZV-E10 II, ZV-E10, ZV-1, ZV-1F, for Alpha 7 IV, for Alpha 7S III, please notice to remove mount bracket on the side. It also pairs with SMALLRIG V-mount battery plates 4064B, 4063B and V-mount batteries 4292, 4608, 3579 for efficient cooling and power supply.. Superior Cooling Performance SmallRig Cooling Fan 5063 combines a 7000 RPM high-speed fan with advanced TEC cooling technology to efficiently dissipate heat, significantly extending shooting time and preventing camera overheating during high-quality video recording.. Tool-Free Snap-On Design With an innovative snap-on design, the cooling fan can be installed or removed in just 1 second, offering unparalleled portability and convenience while maintaining easy access to the camera's LCD screen.. Dual-Speed Flexibility Featuring high-speed and low-speed modes, this cooling fan adapts to various shooting environments and needs, ensuring optimal temperature control for long time recording sessions.. Usage Precautions 1. Remove the cooling fan before folding the cameras LCD screen. 2. Avoid using or storing the fan in humid environments as its not waterproof. 3. Keep the air inlet and outlet unobstructed during operation. 4. Do not use the fan when the camera is inactive to prevent internal condensation. 5. Turn off the fan by holding the power button for 2 seconds or disconnecting the power cable when not in use. Note External power source required as the fan does not have a built-in battery..

Wide Compatibility The SmallRig V mount battery charger is compatible with most V-mount batteries available on the market, offering flexibility and convenience. Whether you're using SmallRig batteries or other brands, this charger ensures seamless compatibility and reliable performance across the board. Perfectly compatible with SmallRig V mount battery VB99 SE, VB99, VB99 Pro, VB50, VB155, VB212. Note this charger is not for YINCHEM Blade series.. Dual Battery Charging This SmallRig V mount battery charger effortlessly powers up two V-mount batteries simultaneously, streamlining your workflow and minimizing downtime on set. With dual channels, you can keep your gear powered and ready for action without interruption.. Intelligent Charging Engineered with advanced circuitry, this V mount battery charger optimizes the charging process to maximize battery lifespan. It intelligently monitors and adjusts the charging parameters, ensuring efficient and safe charging every time. Your batteries stay healthy and reliable for the long haul.. Rigorous Safety Standards Trust in the reliability of this SmallRig V-mount battery charger, backed by rigorous testing and international certifications including 3C, FCC, and CE. Designed to meet the highest safety standards, you can charge your batteries with confidence, knowing they're protected against overcharging, overheating, and short circuits.. Convenient Monitoring Stay informed with ease. This dual channel V mount battery charger features multiple operational indicator lights, providing real-time updates on the charging status of your batteries. From power levels to charging progress, you'll have all the information you need at a glance, keeping your workflow smooth and efficient.. Portable Design Designed for convenience, SmallRig dual channel V mount battery charger features a comfortable handle on top and a foldable bottom stand, allowing for easy portability and hassle-free use. Whether you're on location or in the studio, you can take this charger with you wherever you go, ensuring your batteries are always ready for action..

Tool-Free Quick InstallationThe battery plate features a quick release mechanism for Arca-Swiss, enabling tool-free mounting and adjustment for rapid V-mount battery setup. Constructed from aluminum alloy, the V-mount battery plate provides a compact, lightweight, and efficient all-in-one power supply solution.. Upgraded Compatibility for ArcaThe baseplate for Arca-Swiss equipped with an adjusting lever, is compatible with most plates for Arca-Swiss on the market, including cages and L-shaped handles, enabling seamless integration. Its retractable design accommodates mirrorless cameras of various sizes.. Modular LCD Protection BracketThe LCD protection bracket features tool-free height and width adjustment, fitting most flip-screen mirrorless cameras. The battery plate fits V-mount batteries up to 80mm 3.1 wide when using the LCD protection bracket. Compatible SmallRig V-mount batteries 3579B 4871 4872 3580B 4929 4930 4292 4984 and more.. D-Tap USB-C SupplyBuilt in D-Tap and USB-C power interfaces, it enables simultaneous power supply to multiple devices, making battery changes faster and more efficient. The interfaces are positioned to avoid interference with the use of camera and top handle. The USB-C port also supports up to 65W input, allowing it to function as a V-mount battery charger.. Foldable StableFeatures a 180 rotatable design for flexible setups store compactly at 0, mount slimly at 90, or access screens easily at 180. A stainless steel gear lock ensures secure stability, while a damping system securely holds the battery during rotation for enhanced safety.. Cable Clips StrapThe kit also includes cable clips and an elastic hook-and-loop strap for organized cable management, minimizing the risk of snags during shooting. The V-mount battery unlock button features a trigger safety lever design and supports customizable usage..

Intelligent V Mount battery The dedicated mobile application provides comprehensive remote control functions, including viewing the status of multiple batteries, controlling port switches, multiple positioning of batteries lights flashing and wake up the screen and OTA update, which significantly improves the workflow efficiency. A small LED light is attached to the back of the battery, which is convenient for you to find things and aim at the V-mount battery plate in the dark.. Bi-direction PD 100W Fast-Charging Supports PD 3.0 technology, the V mount battery X99 comes with a USB-C port to deliver up to 100W of power. With a 100W and above fast charging GaN charger, you can have a full charged battery in just 2 hours.. 8 Device Charging Ports Power all your deivice with versatile ports, including 2 x D-Tap, 2 x USB-C, 1 x BP, 1 x DC 5.5 x 2.1mm 8V, 1 x DC 5.5 x 2.5mm 12V, and 1 x USB-A. A versatile V mount battery for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop and video light, etc. Additionally, it features a 14-20 and 38-16 threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp.. 2.0-inch touchscreen The battery's smart management system is centered around a 2.0-inch HD color touchscreen with a frosted anti-glare surface, not worry about fingerprints, not worry about scratching the screen, ensuring optimal visibility in all lighting conditions. The larger screen allows you to know the situation of each port more clearly. The ports can be turned on or off through the touch screen, and there is an anti-misoperation function without worrying about accidentally turning off the battery.. Safe Reliable Power The SmallRig V Mount Battery X99 is equipped with an advanced Intelligent Battery Management System BMS, safeguarding against short circuits, over-temperature, over-voltage, over-current, over-charge, and over-discharge. The battery adopts triple protection a 1.5-meter 4.9-foot anti-drop casing, eight corners protected by silicone and four reinforced edges, all-metal side plates and completely reinforced internal circuits. IP54 grade ensures reliable operation when exposed to water splash, rain or dust, making it a perfect choice for outdoor production.. Palm Size, Huge Power Only 4.9 x 3.1 x 2.7 inches, weighs 31oz, with a capacity of 99Wh 6800mAh and can charge for Canon R5C for 7.3 hours and for Nikon Z8 6 hours, for MacBook 16 Pro for 1 time or for iPhone 15 Pro 5.5 times, for Smallrig RC 60B COB approximately 3 times. Please know that this V mount battery is 99Wh, which meets the requirements of the TSA100Wh to be taken on airplanes as carry-on baggage..

Bi-direction PD 100W Fast-ChargingSupports PD 3.0 technology, comes with a USB-C port to deliver up to 100W of power. With a 100W fast charging GaN charger not included, you can have a full charged battery in just 1.5 hours slash downtime and maximize productivity. Additionally, it features a threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp. V Mount Battery 94.72Wh with Multiple PortsWith 2 USB C, 8.4V3A DC 12V3A DC ports, BP and D Tap interfaces to simultaneously charge multiple devices like DSLR cameras Compatible with Canon Sony Nikon BMPCC 4K 6K Cinema Cameras, field monitor compatible with Godox Atomos Ninja v, etc, LED video lights, V mount battery plates VM-VP5, VM-VP4. Also comes with dust covers to protect the ports. Portable Airline Friendly Palm sized at 4.33 x 2.95 x 2.29inches, and weighing just 21.34oz605g, airline friendly and never adding bulks to your luggage. With a capacity of 94.72Wh 6400mAh and can charge for Canon R5C for 7 hours and for Nikon Z8 5.7 hours, for MacBook 16 Pro for 1 time or for iPhone 17 Pro Max 4.3 times. Real-Time Power MonitoringThe ZGCINE V Mount Battery comes equipped with a bright 1.1inch OLED screen, offering instant visibility into port status, voltage, power output, and remaining battery lifeeliminating any guesswork. Single Click Short press the power button to wake up the screen. With intuitive controls and precise monitoring, ensures youre always in charge of your power supply. Intelligent Battery Management System The battery features an intelligent battery management system BMS that automatically protects against short circuits, overvoltage, overcurrent, overcharging, and over discharge, and sends timely alerts in case of overpower, over current, over voltage, over temperature, and under power discharge. Aerospace aluminum casing enhancs safety and durability. Need other capacityYou can look at 50 Wh battery ZGCINE V50Asin B0B6BJ4CJX, ZGCINE X50Asin B0CQCRBZ2P, 99 Wh batteries ZGCINE V99ProAsin B0DYK7XG7H, ZGCINE X99Asin B0CQCQHMM6, 156Wh battery ZGCINE X160Asin B0CQCPK7XQ and 222 Wh battery ZGCINE X222Asin B0G5YHFNY2.

Palm-size with Maximum PowerWith 99Wh of high capacity, Moman Power 99 Pro V-Mount battery has the maximum power allowed to be carried on the plane, yet fits well into most of v-mount fixtures, portable for on-the-go shooting with palm size.. The First Visual Battery with the Time-Display Time display is the most requested feature for battery. Capturing currents in every 100ms, Moman Power 99 Pro V lock battery is the first in its line provides a good assumption of remaining film time and charging time with just a glimpse at the OLED screen.. 65W USB-C Quick ChargeWith the upgrade on 65W USB-C slot, you can charge Moman Power 99 Pro through BP or D-tap traditionally with large adapter or simply with USB-C Cable includedthat share the same charger with your smartphone, tablet or laptop, skipping the hassle of bringing tons of batteries and chargers.. 200W Output for Multiple DevicesWith Maximum Continuous Current rating up to 15A, Moman Power 99 Pro is powerful enough for 200 Watts multiple devices simultaneously during your shoot.. Powerful Battery CoreMoman Power 9999 Pro is designed with Unique Balance Cell Algorithm, tuning each battery cell to same voltage level during charging discharging process to ensure a recycle life up to 1000 times..

High Capacity Air Travel Friendly Offering a maximum power capacity of 99Wh and 6700mAh at 14.8V, this V-mount battery is within the allowable limit for carry-on on airplanes, perfect for photographers and videographers on the move.. Extensive Connectivity Options With two USB-C, one USB-A, one DC 12V, 5.5x2.5mm, BP, and D-TAP ports, this battery ensures you can power a wide array of devices simultaneously, making it a versatile power hub for all your equipment.. 100W Bi-Directional PD Fast Charging Equipped with advanced 100W PD USB-C technology, this battery provides fast charging capabilities, fully recharging in just 2.5 hours, and can also charge laptops, smartphones, and other devices efficiently. A 240W USB C charging cable is included. Real-Time TFT Color Display Monitor the output power for each port and the overall status of the battery through a clear TFT color display, ensuring effective power management and optimal usage during extended shooting sessions.. Robust Construction with Emergency Lighting Built with durable aluminum alloy and fire-resistant PC, and featuring a scratch-resistant acrylic cover, this battery also includes an emergency night light for ease of use in low-light conditions, making it a reliable choice for demanding environments..

With 10500mAh True Capacity Replacement battery for Sony NP-F970, power supply for Sony FX30 FX3 A7 V A7 IV A7S III, for Canon EOS R5 R5 C R6 R5 Mark II R6 Mark III, for Panasonic S5 GH5, for Nikon Z8 ZR and other DSLR cameras, LED panels, monitors, stabilizers, and mobile devices seamlessly. PD 36W fast charging refuels this USB-C rechargeable camera battery in 3.5 hours, ideal for weddings, live streams, and outdoor adventures.. Dual-Port Smart Charging Hub features a standard NP-F port that fits equipment using NP-F batteries. USB-C inputoutput 36W and USB-A output 18W deliver 54W total power for simultaneous rig and phone charging. Independent circuit design prevents voltage drops, ensuring stable power for cameras, camcorders, LED video lights, field monitors, transmitter, motorized camera sliders, gimbals, drones and phones.. Precision OLED Touch Display Lightly tap the responsive touch panel to activate the ultra-clear screen, showing real-time remaining capacityso as to know the remaining power of the battery more accurately than other batteries with LED indicator lights, and there is no need to worry about electricity. Never miss a shot during time-sensitive product shoots or travel vlogging.. Pro-Grade Thermal Safety Control Built with Top-tier Li-ion cells and 8-layer protection overchargeovercurrentshort-circuit. Operates safely at -10C45C discharge and 0C45C chargetrusted for outdoor film production in harsh environment.. Bold, Eye-Catching Aesthetic Stand out with the vibrant orange shell, makes it easier to find it in a bag full of black accessories. Sleek design, the orange color adds a stylish touch to your gear..

Fully Decoded for Canon LP-E6P The SmallRig battery is 100 compatible for Canon LP-E6P battery. It works seamlessly with original devices for Canon EOS R6 Mark III 5D Mark II 5D Mark III 5D Mark IV 6D 6DMark II 7D 7DMark II 60D 60Da 70D 80D 90D XC10 XC15 5DS 5DSR R R5 R6 R5C R7 R6 Mark II R5 Mark II C50 R6 V, supports camera power display, and even charges with the original chargerno pop-up alerts, ensuring a hassle-free experience. 2520mAh Real-Capacity This high-capacity battery delivers up to 3 hours and 10 minutes of continuous 4K30P recording for Canon R7. USB-C rechargeable camera battery supports charging via power banks, household outlets, car chargers, and the original charger, enabling you to recharge anytime, anywhere. 2.5-Hour Quick Full Charge With 5V2A high-current charging, it reaches full power in just 2.5 hoursperfect for Canon R6 Mark III, R5 Mark II, R5, R6, R7,C50, R6 Vusers who need quick power replenishment. Safety Durable Made of flame-resistant ABSPC material, this battery resists high temperatures and impacts. Its exact size ensures a snug fit in your camera, preventing loose connections or installation issues. Sleek Design Adopting an all-new color scheme, the appearance is more recognizable while maintaining professional quality. It is an ideal backup battery for Canon camera users, balancing performance and aesthetics.

Versatile and Compact Design SmallRig V-mount battery plate 4064 adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 14-20 threads to realize quick installation and adjustment of camera and battery. Through the 14-20 threads connected to the dual 15mm rods and chest support system to reduce the burden and ensure more stable handheld shooting.. Stretchable Baseplate The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5?mm 1.43?inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools.. Double Quick Release Plate for Arca-Swiss Its bottom is equipped with a 14 -20 and 38 -16 quick release plate for Arca-Swiss, which can quickly switch among handheld shooting, gimbal shooting and tripod shooting. And the included quick release plate for Arca-Swiss allows the camera to be quickly connected to the kit.. Not Block Camera Screen You can flip the V-mount battery plate down 90 degrees through the thumb lock on the side, so that you have enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling.. Variety of Power Solution Options This V-mount battery Plate has a mini V-mount plate with 14 -20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate and power bank holder, thus realizing more diversified battery solutions..

Wireless Shooting Grip SmallRig SR-RG2 Multifunctional Wireless Shooting Grip 4551 combines a camera grip, selfie stick, and desktop tripod into one versatile device, making it an ideal tool for vlogging, live streaming, and daily filming.. Remote Control Equipped with modular magnetic wireless control, the grip allows remote operation for some Nikon, for some Canon, and for some Sony cameras, including shutter release, recording, focus, zoom, and custom settings, with a control range of up to 10m 32.8ft.. Before purchasing, please check if your camera model is compatible. Compatible devices For Nikon Z50II for Sony Alpha 7 III Alpha 7 IV Alpha 7R III Alpha 7R IV Alpha 7R V Alpha 7S III Alpha 7C II Alpha 7C Alpha 7CR Alpha 9 Alpha 9 II Alpha 9 III Alpha A1 Alpha 1 II Alpha 6700 Alpha 6600 Alpha 6100 Alpha 6400 ZV-E1 ZV-E10 ZV-E10 II ZV-E10 ZV-E10 II ZV-1 II ZV-1 ZV-1F FX3 for Canon EOS M200 R50 PowerShot V1 EOS R50V EOS R5II EOS R8 EOS R6 Mark II EOS R5II EOS R8 EOS R6 V EOS R6 Mark II EOS R5 EOS R6 EOS R7 EOS R10 EOS M6 Mark II EOS R EOS M50 II G7X III.. Unrestricted Creative Angle Wireless shooting grip can be extended to 14.6cm 5.7in for wider framing and offers 360 pan and 180 tilt 90 forward and backward for various shooting angles and scenarios.. Added Protection This grip attaches to the camera using 14-20 screws, with rubber pads on the mount to prevent the camera from scratches. It can also be transformed into a tripod, supporting cameras on a desktop during live streaming or filming.. Stable Support for Cameras With a load capacity of 1.5kg 3.3lb when not extended and 0.8kg 1.76lb when extended, the grip offers stable support for various camera models. The remote control features a USB-C charging port, allowing for a full charge in 2.5H, which provides up to 40H of use. Furthermore, it can be upgraded via the SmallRig Up App for broader camera compatibility.. Included Accessories Comes with a wrist strap with a 5kg 11lb load capacity offers convenient portability. Compact and lightweight, the grip fits easily into your bag. Notes 1.Remote control charging input voltage must not exceed 8V..

Compatibility Standard V-Mount design, compatible with multi-brand V-Mount batteries, no additional adapters required, quickly expand the power supply system.. Anti-Slip Clamping Clamping range 15mm-40mm, built-in anti-slip pad, safe and stable, to achieve installation in tripods, light stands, handheld rings and other locations.. Load-Bearing The entire bracket is made of aviation-grade aluminum alloy, sturdy and robust, can bear 1.5kg, and can easily expand the power supply scheme of lighting, monitors and other equipment to meet professional shooting needs.. Convenience The crab claw clamp adopts a mini shape design, which is lighter and more portable.. Note 1. Do not disassemble the V-Mount crab-shaped clamp, as this may compromise functions such as the anti-twist design.2.This product does not include a V-lock male connector.3.This product is designed for mounting V-Mount batteries only and does not feature a power port..

High Capacity 13400mAh 190Wh Voltage 14.8V Battery Type Polymer Li-ion Providing 2 times life time of original battery. Super high capacity V Series battery for Blackmagic Ursa Mini and Epic cameras. Compatible with cameras using standard V Mount V Lock batteries. Compatible with HVR-S270C PMW-EX330K PMW-EX330L, PMW-580K PMW580L, PDW-680 PDW-700 PDW-850PMW-TD300,HDW-F900R HDW-680 HDW-800P, PMW-F55 PMW-F5,etc. Super-long lasting charge for each use and more than 500 full recharge cycles over life of the battery. Shorter Charging Time with 3A Output D-tap Charger. Unlike other 2A output charger, our 3A charger can reduce the battery charging time. Comes with a wall plug and charger for self-charging so no extra charger is needed. Power D tap Compatible, Independent 5V2.4A USB output, available to charge smart-phone,etc. 4-level LED indicator on the side to show remaining power. Durable Grade A Cell Battery ensures maximum lifespan and power. High performance and long lasting usage. Built-in circuit protection ensures both safety and stability over charging, short circuit, high temperature, and surge protection. CE FCC Certified. Charge with any standard V Mount charger or D-Tap charger. Buy with Confidence Warranty 24 x 7 email support. If you have any questions, please contact us directly. We are committed to resolving any situation in which our product does not meet your expectations.

For Dual NP-F BatteriesThis adapter plate supports one or two NP-F batteries to power your mirrorless cameras, monitors, or other devices. It suitable for NP-F550 570 750 770 950 970 batteries or more. When two batteries are installed, it allows you to replace one battery without shutting down connected devices, ensuring an uninterrupted power supply UPS.. Multiple Power SupplyThe power supply base is equipped with built-in D-Tap, DC 5521, and USB-C ports, enabling simultaneous charging for multiple devices. The ports are scientifically arranged to avoid interfering with camera operation or the use of top handle. The USB-C port also supports a maximum input of 36W, allowing the base to function as a charging dock.. Intelligent Power ManagementThe built-in smart chip manages power intelligently. In discharge mode, it prioritizes the lower-charge battery, switching to dual-battery output when needed for easier swapping and higher-power support. In charge mode, it prioritizes the higher-charge battery and then switches to dual-battery when low-charging to enhance efficiency.. Independent Power ControlThe built-in power switch allows you to check the battery level and turn on output with a single press, or turn off the output by holding it for 2 seconds. This user-friendly design eliminates the need to unplug cables after shooting and helps conserve battery power.. 2 Mounting OptionsThe battery plate can be mounted using a V-mount plate adapter or via the 14-20 threaded hole at the bottom. Once mounted, it can be powered by installing one or two NP-F series batteries to supply your devices..

Designed for Sony FX3 FX30The cage kit for sony FX3 FX30 is a compact handheld power solution that includes a cage, NATO rail, V-mount battery mount plate, LCD screen protector, elastic hook loop fastener, top handle, and cable clamp for HDMI.. Multiple Mounting PointsThe cage features multiple mounting options, including 14-20 threaded holes and locating holes, 38-16 locating holes for ARRI, and a NATO rail, supporting expansion of accessories like monitor mounts ID 2903B and side handles ID 5160, 5194.. Compact V-Mount Battery PlateIncluded battery plate features a quick release mechanism for Arca-Swiss, enabling tool-free mounting and adjustment for rapid V-mount battery setup. Constructed from aluminum, the V-mount battery plate boasts a foldable design for enhanced portability and easy storage.. Fit for Gimbals TripodsThe integrated quick release plate for Arca-Swiss on the bottom ensures compatibility with tripods for Arca-type and gimbals for DJI RS 2 RSC 2 RS 3 RS 3 Pro RS 4 RS 4 Pro, enabling seamless transitions between handheld, gimbal, and tripod configurations.. Top Handle Cable ClampFinally, the included HDMI cable clamp securely holds cable connections for stable data transmission, while the ergonomic top handle features a non-slip silicone coating for a comfortable grip, making your shooting experience smoother and more enjoyable.. Precautions1. When attaching original XLR top handle for sony, please remove the top NATO rail. 2.The NATO rail features 14-20 threaded holes with 27mm spacing, it's incompatible with accessories requiring 18mm spacing, such as monitor mount ID 2904B..

High Capacity 6600mAh 95Wh Voltage 14.8V Battery Type Polymer Li-ion Providing same life time of original battery. Super high capacity V Series battery for Blackmagic Ursa Mini and Epic cameras. Compatible with cameras using standard V Mount V Lock batteries. Compatible with HVR-S270C PMW-EX330K PMW-EX330L, PMW-580K PMW580L, PDW-680 PDW-700 PDW-850PMW-TD300,HDW-F900R HDW-680 HDW-800P, PMW-F55 PMW-F5,etc. Super-long lasting charge for each use and more than 500 full recharge cycles over life of the battery. Power D tap Compatible, Independent 5V2.1A USB output, available to charge smart-phone,etc. The battery also comes with a wall plug and charger for self-charging,so no extra charger is needed. 4-level LED indicator on the side to show remaining power in time. Compact, lightweight solution for powering cameras and monitor,the battery weight only about 1.37lb.Intelligent charging technology, it only takes 3 hours to fully charge the battery from 0 using our smart charger.If you have a charger with a larger current output, the charge time will be shorter.Built-in circuit protection ensures both safety and stability over charging, short circuit, high temperature, and surge protection. Complies with IATA, ICAO, TSA and UN regulations for air transportation without restrictions. Buy with Confidence 24 x 7 email support. If you have any questions, please contact us directly. We are committed to resolving any situation in which our product does not meet your expectations.

Foldable V Mount Battery Plate This compact and lightweight V mount battery plate simultaneously mounts a camera and a V mount battery. It has a quick release button for fast installation and a detachable mini V mount adapter that can make any 14 threaded accessory, such as an NP-F battery adapter plate, work with the V lock system. Compatible with SmallRig Small Rig V lock battery. Double Arca Type QR Mounts The battery mounting plate clamp features an Arca type quick release plate for various cameras and an Arca type base with 14 and 38 threads for a wide range of tripod heads. A retractable anti off pin can prevent the camera from falling. Seamless Equipment Transition Compatible with DJI RS4 RS 4 Pro RS3 RS 3 Pro RS 2 RS2 and RSC 2 RSC2 handheld stabilizer gimbals, the Arca type base with anti off hook accessories can attach to the gimbals from the left or right and seamlessly transfer to a tripod for stable video recording. Extendible Camera Baseplate The 1.436.5mm extendible camera baseplate accessory is compatible with Canon R5C R100 EOS R50 compatible with Sony FX3 FX30 alpha A9 A7S A7R A7CR A7C A6700 ZV-E10 ZVE10 compatible with Nikon Zf Zfc Z30 Z9 compatible with Fujifilm X100VI fuji X-S20 X-T5 X-H2S compatible with Panasonic Lumix GH6 S5 IIX compatible with Blackmagic 4K 6K and other DSLRmirrorless digital cameras. 180 Flexible Battery Positions The 180 tilt lets you mount the V mount battery in vertical or horizontal positions and keeps sure the camera flip screen fully accessible. Fold it flat and fit it inside your bag for outdoor shooting.

Notice1.Recommended to use a power adapter with 22.5W or higher output 2.Not compatible with 5V 1A power adapterss 3.When using a 5V 2.4A adapter, the charger operates in slow-charge mode, prioritizing the charging of the battery in Channel 1 first. It automatically switches to Channel 2 once Channel 1 is fully charged. Full Compatibility for NP-FZ100Smallrig camera battery charger is fully compatible with Sony NP-FZ100 batteries, ensuring reliable charging for both original and third-party batteries.It perfectly supports power needs for sony Alpha A7 V, A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II,etc. 2-Hour Dual-Slot Rapid ChargingThis NP-FZ100 battery charger features a dual-slot design, enabling simultaneous charging of two NP-FZ100 batteries or individual charging of a single battery. Experience rapid charging, fully recharging two NP-FZ100 batteries in approximately 2 hours. The efficient charging system significantly reduces wait times, ensuring your A7V and A7IV batteries are quickly ready for extended shooting sessions. 22.5W USB-C Fast-charging PortEquipped with a universal USB-C input port and including a fast charging cable, the smallrig camera battery charger for sony can be powered via wall adapters, car chargers, or portable power banks. This multi-scenario compatibility makes it easy to keep your FX3 and other camera batteries ready anywhere. Intuitive LED Power DisplayEach charging slot features 5 LED indicators, with each light representing 20 of the battery level. You can check the remaining power of your NP-FZ100 battery even without connecting to a power source. A red warning light alerts you when the battery is critically low, eliminating power anxiety. Smart Safety ProtectionThis battery charger features advanced safety functions, including over-temperature protection and over-voltage protection. The intelligent system continuously monitors temperature and voltage. When overheating is detected, the charger automatically reduces charging speed. Upon detecting overvoltage, it immediately halts charging. As the battery nears full charge, it switches to trickle charging mode to preserve the health of your NP-FZ100 battery for sony. The battery charger features a semi-enclosed design that prevents batteries from slipping out and effectively protects them from scratches.

Comfortable Foam Pads Made from high density, elastic foam with a PU leather coating and nonslip texture, the ergonomic shoulder and back pads deliver stable support to reduce fatigue during long shoots. The shoulder pad attaches via touch fasteners and can be reversed for left or right shoulder mounting. Self Adjusting Back Pad A spring loaded mechanism allows the back pad to automatically contour to your body based on pressure and contact. With 55mm of horizontal adjustment, it adapts to various body types for enhanced comfort and fit. 15mm Dual Rod Clamp The clamp secures two 15mm rods to connect accessories compatible the 15mm LWS rod rail system, including NEEWER SR007 Shoulder Rig, SR015 Camera Baseplate, and PG001 Mini Follow Focus. Also compatible with SmallRig shoulder stabilizer rigs. Diverse Mounting Points Featuring several 14 threads, a 38 thread for ARRI, and an NATO rail, this support enables attachment of various accessories, such as the MA004MA005 Monitor Mount, ST15 Magic Arm, GA010 Phone Tripod Mount, and more as content creator essential and influencer must have camera photography gear. V Mount Battery Plate The built in quick release V mounting battery clamp plate can attach a V lock camera battery for prolonged outdoor power supply. Compatible with NEEWER PS099EPS099EPPS150EPS050EPS099S V mount battery models.

Tool-Free Quick InstallationThe battery plate features a quick release mechanism for Arca-Swiss, enabling tool-free mounting and adjustment for rapid V-mount battery setup. Constructed from lightweight, sturdy aerospace aluminum, the V-mount battery plate boasts a foldable design for enhanced portability and easy storage.. Upgraded Compatibility for ArcaThe clamp for Arca-Swiss equipped with an adjusting lever, is compatible with most plates for Arca-Swiss on the market, including cages and L-shaped mount plates, enabling seamless integration. Its retractable design accommodates mirrorless cameras of various sizes.. Modular LCD Protection BracketThe modular LCD protection bracket features tool-free height and width adjustment, fitting most flip-screen mirrorless cameras. The battery plate - . ? . . Compatible SmallRig V-mount batteries 3579B 4871 4872 3580B 4929 4930 4292 4984 and more.. Stainless Steel Gear Lock with DampingThe swivel control utilizes a stainless steel gear lock for secure operation and shake-free footage, while a damping system prevents accidental drops during adjustments. When rotated to 180, the plate provides easy access to flip screens.. Multiple Connection PointsOnce removed, it reveals 14-20 and 38-16 threaded holes for alternative mounting solutions. The V-mount plate is equipped with multiple 14-20 threaded and 14-20 locating holes, allowing for the attachment of accessories such as magic arms ID 3238B 3873 for wireless transmitters and professional setups.. Cable ClipsThe kit also includes cable clips and an elastic hook-and-loop strap for organized cable management, minimizing the risk of snags during shooting. The V-mount plate offers multiple cable clip mounting holes for customized routing..

V-Lock Battery PlateSmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power ports.. Comes with Dual Rod ClampIt comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods.. Multiple Mounting PointsThe plate itself features multiple 14-20 countersinks, M3 countersinks, M4 countersinks, 14-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories.. Wide CompatibilityThe mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.. High CustomizationTwo stoppers will prevent the battery from twisting when attached. The plate is also for Blackmagic URSA mini. Note 1. No V-Lock part male provided with the plate. 2. This is purely a mounting solution for a V-mount battery no power ports on the plate.. Related ProductsSmallRig mini V-mount Battery VB50 50Wh 3579 and VB99 99Wh 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc..

NOTE This battery cannot be used by inserting it directly into the battery door for BMPCC 6K 6K G2 6K Pro. This battery uses the USB-C port for charging, and the overall size is a little bigger than the OEM battery, causing it to not be able to be plugged directly into the camera for use, recommended use with NP-F battery plate.. Rapid 3-Hour Charging This battery has a USB-C charging port, with high current charging 5V2.3A, you can have a full battery in 3H. And it comes with a charging indicator to clearly show the charging progress. Red indicator for charging, green indicator for fully charged.. Sufficient Battery Capacity with 100 true 3500mAh capacity, this battery power for Atomos Ninja V through 1-hour shoots.. Pro-Grade Safety by Design Built with Top-tier Li-ion cells and 6-layer protection overchargeovervoltageovercurrent. Operates flawlessly from 0C to 45Ctrusted for outdoor film production in harsh environment.. Bold, Eye-Catching Aesthetic Stand out with the vibrant orange shell, makes it easier to find it in a bag full of black accessories. Sleek design, the orange color adds a stylish touch to your gear..

Wide compatibility Working with Sony mirrorless cameras virtually all modern that use the NP-FZ100 battery, ZGCINE PD-FZ100 dummy battery is compatible for Sony A7, A7III, A7 V, A7 IV, A7R IV, A7RV, A7C II, A7S III, A7S3, A7CR, A1, A1 II, A6700, A6400,A6600, FX3, FX30, ZVE10 II, A7M3, Alpha A9 II ,ZVE1,etc. Regulated 8V This ZGCINE USB-C Battery Dummy provides a stable 8V output, ensuring reliable power for Sony NP-FZ100 battery cameras, which is safer for your camera compared to unregulated alternatives. Safe to use This NP-FZ100 dummy battery USB C provides safety features such as full decoding and no pop-up warnings, and it securely plugs into Sony camera. Working with KF CONCEPT ZGCINE Neewer SmallRig V Mount Battery on the market, it doesn't reduce device performance and provides continuous power to the camera for extended periods. 12V-17V Input Voltage Accepts 12V-17V input voltage overvoltage, overheating, and overcharge short-circuit protection. Durable Tangle-free This ZICINE USB-C to NP-FZ100 battery dummy for Sony cameras is made of high-quality braided nylon material, making it durable and wear-resistant. The sturdy nylon braiding prevents tangling, ensuring easy and convenient setup and storage. Beautiful Appearance For Sony NP-FZ100 battery UCB-C, it features an orange braided cable, which is easy to spot compared to most black cables, adding a touch of brightness to your shooting process.

For Power Bank SmallRig universal power bank holder 4600 is designed for a portable power bank. When a sustainable charging solution is needed, it can secure the power bank to a camera rig and mobile phone rig, allowing for a continuous power supply.. Adjustable Power Bank Clamp Mount The Clamp can hold power banks with width range from 55 to 86 mm 2.2 to 3.4 in, which covers most power bank products in the market. Such as fit for Anker, fit for RAVPower, fit for INIU, fit for POWERADD, etc. Safe Install The power bank holder comes with detachable standard cold shoe mount. It allows for attachment to devices using a detachable standard cold shoe mount at the bottom and a 14-20 screw.. Lightweight and Sturdy The power bank clamp 4600 is made of PPS, aluminum alloy and silicone, with a net weight of only 53 grams, which is light and easy to carry.. Rubber Pad The interior of the clamp is equipped with rubber pads to protect your power bank from scratches..

EXTENDED POWER for Cameras and Accessories via Higher Capacity V-Mount Batteries. MULTIPLE OUTPUTS Includes 1x 60W PD USB-C, 2x P-Tap, and 1x 2-Pin Lemo connections for flexible power options.. SECURITY STRAP Features a Unique Way to Further Secure V-Mount Batteries. MOUNTING POINTS on the Top of the Plate Improve Speciality Rigging Possibilities. ROD ADAPTER Compatible with Dual 15mm LWS Rods.

Compatibility The cooling fan is design for Nikon ZR, engineered to mitigate overheating in the ZR camera, enabling extended recording times for high-resolution video. The included mounting bracket provides native support for Nikon ZR and can be adapted for Sony mirrorless cameras when removed. Superior Cooling Performance SmallRig ZR Cooling Fan for Nikon combines a high-speed 7,000 RPM fan with TEC Thermoelectric Cooler technology for superior heat dissipation, effectively preventing thermal shutdown.. High and Low Cooling Modes The cooling system featuring high-speed and low-speed modes, adapts to various shooting environments and needs, ensuring optimal temperature control for long time recording sessions.. Snap-On Design With an innovative snap-on design, the cooling fan can be installed or removed in just 1 second, offering easy storage and enhanced portability while maintaining easy access to the camera's LCD screen.. Continuous Cooling Choice For extended power and continuous cooling, the cooling fanis compatible with SmallRig V-Mount battery mount plate kits ID 4064B, 4063B, 5315, 5227 and V-Mount batteries ID 3579, 4608, 4292.. NOTE1.After installing this product, the camera's LCD screen cannot be retracted. Please remove the cooling fan before retracting the LCD screen. 2. When the fan is not in use, press and hold the power button for about 2 seconds to enter standby mode, or unplug the power cable to turn it off completely..

For DJI RS 3 RS 3 Pro RS 2 RSC2 stabilizer SmallRig V mount battery plate comes with a cold shoe mount for quickly mounting a V mount battery onto the bottom for DJI stabilizer, powering the camera, image transmitter, and wireless receiver motor with an extended power source.. Power Supply Plate It features a standard V-lock to compatible with most of V mount batteries, such as SmallRig V mount battery VB50 3579 and VB99 3580. It also supports SmallRig NP-F battery Plate via the included mini V-mount plate with 14 -20 threads.. Double Side Anti-off Design This V mount battery plate comes with anti-off baffle and anti-off buckle, makes it safe and stable.. Compact mini Size Only 55.0 x 55.5 x 20.6mm, weighs 53g, mini and small, save place and easy to take around.. Note This V mount battery is Incompatible with VB155 V Mount Battery ID 3581.. Note This V mount battery is Incompatible with DJI RS 4 and RS 4 Pro..

High Capacity 10400mAh 154Wh Voltage 14.8V Battery Type Polymer Li-ion Providing 1.5 times life time of original battery. Super high capacity V Series battery for Blackmagic Ursa Mini and Epic cameras. Compatible with cameras using standard V Mount V Lock batteries. Compatible with HVR-S270C PMW-EX330K PMW-EX330L, PMW-580K PMW580L, PDW-680 PDW-700 PDW-850PMW-TD300,HDW-F900R HDW-680 HDW-800P, PMW-F55 PMW-F5,etc. Super-long lasting charge for each use and more than 500 full recharge cycles over life of the battery. Shorter Charging Time with 3A Output D-tap Charger. Unlike other 2A output charger, our 3A charger can reduce the charging time. Comes with a wall plug and charger for self-charging so no extra charger is needed. Power D tap Compatible, Independent 5V2.4A USB output, available to charge smart-phone,etc. 4-level LED indicator on the side to show remaining power. Durable Grade A Cell Battery ensures maximum lifespan and power. High performance and long lasting usage. Built-in circuit protection ensures both safety and stability over charging, short circuit, high temperature, and surge protection. CE FCC Certified. Charge with any standard V Mount charger or D-Tap charger. Buy with Confidence 24 x 7 email support. If you have any questions, please contact us directly. We are committed to resolving any situation in which our product does not meet your expectations.

Universal Compatibility Embrace versatility with the standard V-mount, ensuring compatibility with a broad spectrum of V-mount batteries available in the market. Fully compatible with SmallRig V-mount battery VB50AsinB0BQLV3W1F, VB99AsinB0B6Z9K42P, VB99 ProAsinB0CLGQDFCG, VB155AsinB0B6ZCNF1P.. Powerful Charging Hub Experience high-speed charging with the PD protocol-compatible USB-C 65W Max. and QC protocol-compatible USB-A 36W Max. ports. Additional D-Tap 14.8V x 1 and DC 8V x 1 12V x 2 power ports provide a comprehensive charging solution for various devices. Clear indication of working status and fastslow charging modes through the power and chargingdischarging indicator lights.. Effortless Integration Streamline your setup with quick and hassle-free mounting onto any 15mm LWS rod system, enhancing the efficiency of your workflow.. Accessory Attachment Points Equipped with six 14-20 threaded holes, ten M4 threaded holes on the back, and five 14-20 threaded holes on the top and bottom for attaching various accessories, including crab-shaped clamps, dual rod clamps, and magic arms.. Intelligent Controls and Robust Build Take command with the user-friendly power onoff button, simultaneously controlling multiple ports for seamless operation. The aluminum alloy plate not only exudes durability but also boasts excellent heat dissipation, ensuring sustained high performance even in demanding shooting conditions..

Rich Interface With USB-C, USB-A, DC 5.5x2.1mm 8V, DC 5.5x2.5mm 12V, BP and D-TAP ports, this V-mount battery is highly versatile and can power multiple devices simultaneously. It can be used to power DSLR cameras, camcorders, monitors, smartphones, wireless video transmitters, tablets and laptops. Additionally, it features a 14-20 and 38-16 threaded hole on the V-lock, allowing it to be secured with a ball head or other clamp. Bi-directional 45W PD Fast Charging The SmallRig VB50 V-mount battery has a built-in BMS smart chip that supports multi-protocol fast charging such as PDQCSCPPPSAPPLE-2.4A and high power USB-C bi-directional PD fast charging up to 45W. This allows for faster charging of your devices. High Capacity Battery The SmallRig VB50 V-mount battery has a high output power of 3400mAh 50Wh14.8V for longer battery life during lengthy videography and photography projects. This makes it an ideal power backup solution for photographers and filmmakers. If you require a higher capacity battery, we recommend the VB99 99Wh V-mount battery ASIN B0B6Z9K42P or the VB155 155Wh V-mount battery ASIN B0B6ZCNF1P. mini and Portable V-mount Battery This palm-sized battery measures 4.21x2.87x1.33 inches and weighs only 0.72 lbs. It is approximately 30 smaller than traditional V-mount batteries and can be easily held in one hand. It is an excellent choice for travelers. The OLED screen provides information about the battery's operating status. Safe and Reliable The V-mount battery is designed with short circuit, over-temperature, over-voltage, over-current, over-charge and over-discharge protection. It is made of high-quality, fireproof ABS and PC materials with a frosted finish, ensuring durability and a comfortable grip. NOTE 1. When charging R5, R5 C, R6, R7, if there is no connection, please turn off the camera and unplug all cables, unplug and re-plug in the camera's battery and then charge again. 2. When USB-A and USB-C are discharged at the same time, the battery output is 5V3A, when USB-C is charged and USB-A is discharged, the battery output is 5V3A 3. The power button is only used to wake up the screen and check the battery condition, cannot cut off the battery.

Various Interfaces This V-mount battery comes with USB-C, USB-A, DC 5.5x2.1mm 8V, DC 5.5x2.5mm 12V, BP and D-TAP Ports, which are more versatile and support simultaneous power multiple devices, like DSLR camera, camcorder, monitor, COB video light, smartphone, wireless video transmitter, tablet and laptop, etc. It also have a 14-20 38-16 threaded hole on the V-lock, you can hold it with a ballhead or other clamp. Bi-direction PD Fast-Charging The built-in BMS intelligent Chip of SmallRig V-lock battery VB99 supports muti-protocol fast-charging such as PD QC SCP PPS APPLE-2.4A etc., it supports high power USB-C bi-directional PD fast-charging up to 65W, making your charging faster. Sufficient V-mount Battery SmallRig V mount battery 3581 with high capacity of 10500mAh155Wh14.8V, built-in premium li-battery to brings powerful battery life for lengthy videomaking and photography projects, good power backup solution for photographer and filmmaker. Except for this 155Wh battery, SmallRig also have VB50 50Wh V mount battery 3579Asin B0B6YYCFBK and VB99 99Wh V mount battery 3580AsinB0B6Z9K42P, which would meet your needs for different capacities. mini Portable V Mount Battery Palm-size, 4.21x2.87x2.79 inches, only 1.69 lbs, approximately 30 smaller than traditional V-mount batteries, feel free to carry outside and travel. And you can also keep track of the battery's working status at all times via its OLED screen. NOTE 1. When charging R5, R5 C, R6, R7, if there is no connection, please turn off the camera and unplug all cables, unplug and re-plug in the camera's battery and then charge again. 2. When USB-A and USB-C are discharged at the same time, the battery output is 5V3A, when USB-C is charged and USB-A is discharged, the battery output is 5V3A 3. The power button is only used to wake up the screen and check the battery condition, cannot cut off the battery.

mini V-Lock Battery PlateSmallRig Mini V Mount Battery Plate with Crab-Shaped Clamp 2989 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power ports.. Clamp Fits 0.6 to 1.2 SurfaceSmallRig 2989 comes with a crab-shaped clamp that fits rod diameter from 15mm to 30mm to help mount a V mount battery to a tripod, a light stand, or a handheld ring for gimbals. It is constructed with durable aluminum and weighs only 2.2 oz. The mini shape design makes it lighter and more portable.. Multiple Mounting PointsThe plate itself features two 14-20 countersinks, two 14-20 thread holes, and four M4 thread holes, which can be used to attach a dual rod clamp, a magic arm, or other accessories, will help mount a V mount battery to your camera rig as needed.. CompatibilityThe mount features a V-lock mount with a quick-release lever that fits most V-mount batteries but it is not compatible with PAGlink series V mount batteries and it is not compatible with Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.. Please Note1. No V-Lock part male was provided with the plate. 2. In order to achieve the maximum compatibility of the crab-shaped clamp, avoid installing the crab-shaped clamp in the center of the plate refer to the picture for installation form. 3. This is purely a mounting solution for a V-mount battery no power ports on the plate.. Related ProductsSmallRig mini V-mount Battery VB50 50Wh 3579 and VB99 99Wh 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc..

Dedicated Handheld Kit This camera extension frame is designed to enhance the compact handheld power supply experience, provide accessory expansion interfaces, and protect the camera body. The compact V-mount power mounting plate allows for quick installation of V-mount batteries, providing a stable and long-lasting external power supply for worry-free extended shooting sessions.. Integrated XLR Expansion Unit The cage features an integrated XLR expansion module equipped with multiple mounting points, including 14 threaded holes, 14 locating holes, locating pins for ARRI, and a cold shoe. This versatile ecosystem allows you to easily mount a wide range of accessories like monitors, lights, or microphones, adapting your setup for any professional creative scenario.. All-around Protection and Easy Disassembly Featuring a full-cage design, this camera cage fits snugly against every critical component of your camera body. The integrated structure effectively reduces the risk of impact from collisions and drops, providing comprehensive protection. A built-in magnetic wrench makes disassembly and assembly easy.. Built-in Quick Release Plate for Arca-Swiss The cage features a built-in quick-release plate for Arca-Swiss that allows direct mounting onto tripods for Arca-Swissmodels 5290, 4222B and gimbals for DJI RS seriesRS 2RSC 2RS 3RS 3 ProRS 4RS 4 ProRS 4 Mini. This integrated design enables seamless switching between tripods and gimbals for DJI.. Cable Clamp for HDMI The cage kit includes a professional cable clamp for HDMI that securely fastens your cable to the port. This targeted design prevents loose connections and potential signal loss, giving you confidence in your video feed during crucial shoots.. Included Hand Strap This cage kit comes with a durable hand strap, providing a secure and comfortable way to carry your camera during mobile shooting. The strap offers reliable drop protection while maintaining instant accessibility for those spontaneous shooting moments..

Rotatable Camera Side Handle Grip - It is designed for comfortable handheld shooting. It securely attaches using two 14-20 thumbscrews to any cage or mounting plate with two side 14-20 threaded holes spaced 18mm 0.7in apart. One-Touch 360 Rotation - With one button press, the universal side handle can rotate 360 in both directions, allowing for comfortable camera movement at any angle. 15kg Max. Load Capacity - With a load capacity of 15kg 33lb, the handle ensures stability and durability even in demanding conditions, while the silicone texture offers a comfortable grip. Anti-Slip Silicone - The grip is covered with silicone, featuring better anti-slip and anti-freezing effects, making the handle more comfortable and labor-saving to hold. Multiple Mounting Points - It offers versatile expansion options, including 14-20 locating holes for remote controllers ID 3902 and magic arms ID 3873, as well as a cold shoe mount for accessories like monitor mounts ID 2905B, microphones ID 3487, video lights ID 3286B, and for DJI Mic 2. Precautions When adjusting the angle, always hold the camera with your hand for safety..

Powerful V Lock BatteryCapacity 6600mAh95Wh, Voltage 14.8V Rechargeable Polymer Li-ion Battery provides the same power quality as the original battery. Charging time for a single battery is approximately 4 hours. This kit includes two V-mount batteries to provide you with plenty of power. It can be well suited to meet a variety of power supply needs both indoors and outdoors.. Multiple InterfacesEach V-mount battery has one D-tap port and one USB Type-A output. The batteries have a 4-level state of charge indicator. The included dual v mount battery charger also has the XLR 4-pin connector DC output and AC socket. An XLR power cord and an AC power cord for the charger are provided. With the XLR power cable you can connect microphones, power amplifiers, sound systems or professional video camcorders with the appropriate interfaces.. Battery Safety ProtectionThe battery and dual v lock battery charger has a battery protection system that prevents the battery from over-voltage, over-current, over-charging, over-discharging, overheating or short-circuiting. The battery has no memory effect, and the built-in intelligent chip ensures the safe and stable use of the battery. And it has passed CEFCC certification.. Strong CompatibilityGVM v mount battery is widely used in DSLR cameras, professional movie camcorders, spotlights, LED lights, monitors, and other accessories. For example, it is compatible with DSR-250300370K2270WSL600P,EX330350250,S270 PMW-330K580KF5F55F23F3KTD300F35 HDW-F900R800P PDW-700850 DVW-770707P709WSP790ESP790WS9090WS BVP-550550W770 and other V-mount or BP-port devices.. Dual Channel Charger IncludedThe included v-mount dual channel battery charger can charge two batteries at the same time and has the 7-stage LED indicator for charger status, battery charge status, and chargedischarge status. Fast charging 16.8V-3A is possible with one battery or standard charging 16.8V-2A is possible when two batteries at the same time. Charger Parameters ?Input AC 100-240V5060Hz 2A Max. DC output 16.5V-4.5A..

Compatibility The cooling fan is design for Panasonic LUMIX S1 II S1 IIE S1R II 5875 to mitigate overheating in the LUMIX S1 II S1 IIE S1R II camera,enabling extended recording times for high-resolution video. Also compatible with Sony ZV-E1 ZV-E10 II ZV-E10 ZV-1 ZV-1F A7 IV A7S III A7C A7C II A7CR A6700 FX3 FX30 cameras when the mounting bracket is removed. Superior Cooling Performance SmallRig Cooling Fan for Panasonic LUMIX S1 II S1 IIE S1R IIcombines a high-speed 7,000 RPM fan with TEC Thermoelectric Cooler technology for superior heat dissipation, effectively preventing thermal shutdown.. High and Low Cooling Modes The cooling system featuring high-speed and low-speed modes, adapts to various shooting environments and needs, ensuring optimal temperature control for long time recording sessions.. Snap-On Design With an innovative snap-on design, the cooling fan can be installed or removed in just 1 second, offering easy storage and enhanced portability while maintaining easy access to the camera's LCD screen.. Continuous Cooling Choice For extended power and continuous cooling, the cooling fanis compatible with SmallRig V-Mount battery mount plate kits ID 4064B, 4063B, 5315, 5227 and V-Mount batteries ID 3579, 4608, 4292.. NOTE1.After installing this product, the camera's LCD screen cannot be retracted. Please remove the cooling fan before retracting the LCD screen. 2. When the fan is not in use, press and hold the power button for about 2 seconds to enter standby mode, or unplug the power cable to turn it off completely..

Compatibility SmallRig D-Tap to USB-C Power Cable 3266 is a power-supply accessory of MagicFIZ wireless follow focus system. It connects SmallRig Wireless Receiver Motor 3263 with V-Mount battery via the USB-C port and the D-Tap port, respectively.. Supports Fast Charging It supports fast charging and provides a stable output of 9V18W.. Short Circuit Protection NOTE Input voltage of over 18V triggers short circuit protection.. Related Products D-Tap to USB-C Power Cable 3266 and DC to USB-C Power Cable 3268 can connect the V-mount battery for powering SmallRig Wireless Receiver Motor 3263.. What You Get 1 x D-Tap to USB-C Power Cable..

Dedicated Handheld Power Kit The camera cage kit for Nikon ZR is a compact handheld power solution that delivers professional V-mount battery power while maintaining a streamlined, stable, and lightweight setup. Designed for portability, its foldable battery mount plate ensures easy transportation and quick setup on location.. Form-fitting Cage with Ergonomic Grip The cage securely attaches to the camera using a bottom 14-20 screw and dual side locating blocks, and maintains full access to indactor light, buttons, card slots, the flip screen, and the battery compartment. An ergonomic handle with anti-slip silicone coating offers a comfortable, stable grip for extended handheld shooting.. Mutiple Interefaces The cage offers extensive mounting options, including 14-20 threaded holes, 14-20 locating holes, 38-16 locating holes for ARRI, and a HawkLock quick release NATO railenabling compatibility with accessories such as monitor mounts ID 4487, 2903B and side handles ID 5633, 4485. A built-in cold shoe mount supports microphones or lights ID 4660, while a QD socket at the base accommodates QD shoulder straps ID 4118B.. Quick Release Plate for Arca The integrated quick release plate for Arca-Swiss on the baseallows direct attachment to tripods and for DJI RS 2 RSC 2 RS 3 Pro RS 4 Pro gimbals, facilitating seamless transitions between handheld, gimbal, and tripod configurations.. HawkLock Top Handle Cable Clamp The SmallRig HawkLock H21 Top Handle features a built-in Quick Release NATO rail, enabling bidirectional installation and one-button self-lockingeliminating the need for direction checks or additional fastening, significantly improving setup efficiency.The included cable clamp for HDMI secures cable connections for stable data transmission..

FOR POWER BANK SMALLRIG Holder BUB2336 is designed for portable power banks, it could attaches a power bank to the camera rig when a sustainable charging solution is required.. SPRING LOADED CLAMP The holder features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 84mm 2.13.3 inches and Thickness Range 0 mm18 mm 00.7 inch , which covers most products in the market.. RUBBER CUSHIONS The holder BUB2336 comes with soft rubber cushions inside, which can protect your power bank from scratching.. MOUNTING POINTS On the top, bottom and back of the holder, there are multiple 14 threaded holes for connect with other accessories, such as SMALLRIG Top Handle 1638, SMALLRIG Dual Rod Clamp 942, SMALLRIG Magic Arm 2070 or SMALLRIG cages.. LIGHTWEIGHT AND DURABLE The holder BUB2336 is made of aluminum alloy, is very sturdy and durable. Moreover, the net weight is only 105g, is lightweight for you to carry around..

6800mAh High Capacity The 6800mAh 99WH14.54V lithium battery provides sufficient power for extended video shooting or filmmaking, including 7.7 charges for Canon EOS R5 C, and a 1.5h power supply for MS60C LED Video Light. It can be fully charged in 3h using a 16.8V D Tap charger or a PD fast charging GaN charger set not included. Multiple Ports With dual USB A and USB C, 5.5x2.1mm DC 8V 5.5x2.5mm DC 12V ports, BP and D Tap interfaces, the V mount battery simultaneously charges multiple devices like DSLR cameras Compatible with Canon Sony Nikon BMPCC 4K 6K Cinema Cameras, field monitor NEEWER F500, compatible with Atomos ninja v, LED video lights, V mount battery plates ST43, PS003, PS005. PD65W Bidirectional Fast Charging Seamlessly supports PD3.0, QC2.0AFCFCP, QC3.0, SCP, DCP-1.5A, PPS, 5V 2.4A for APPLE charging protocol, etc. The USB C port delivers a maximum 65W two way PD fast charging with a 65W PD charger and cable both not included. Intelligent Protection The V mount battery features an intelligent battery management system BMS that automatically protects against short circuits, over voltage, over current, overcharging, and over discharge, and even sends timely alerts in case of over power, over current, over voltage, over temperature, and under power discharge. The fireproof PC V0 shell for enhanced safety and durability. Compact Portable Palm sized at 4.4 x 2.9 x 2.2, and weighing just 1.3lb, airline friendly and never adding bulks to your luggage. The 1.12 OLED screen provides real time battery status all at a glance, the power switch saves energy, and the non slip pads on both sides for secure handling during use. If no connection while charging R5R5 CR6R7, just turn off the camera, unplug all cables, reinsert the battery, then resume charging.

Designed for AirTagSmallRig Cage MD4149 only for AirTag provides the universal way to attach your camera via two 14-20 screws for adding the ability to quickly track your camera location.. Dual 14-20 Screw MountingThe mounting compartment for AirTag has an integrated through slot with 14-20 threaded holes in 9-18mm 0.4-0.7 pitch, allowing for attaching your camera cage, plate or other accessories in multiple scenarios.. M2.5 Screw Cover MountUsing sturdy Torx M2.5 screws to prevent your device from being removed quickly, so as to maximize the possibility of finding your camera. Please Note Recommend replacing the Torx screws with new ones after using them many times.. Side Holes Maintain TrackingThe hole on the side of the SmallRig cage for AirTag can enhance the proximity tracking distance. Also, the sleek style can effectively hide your device, and the compartment cover is made of PC to avoid interfering with the tracking distance of your device.. EVA Rubber Pad Dampens NoiseAlso, the mounting compartment 4149 for AirTag has built-in EVA pad to protect the your device and prevent noise during movement.. Important Note1. After attached, use the APP Find My to track your device up to 10 meters via Bluetooth proximity. 2. After attached, use the APP Find My to track your device up to 100 meters or more. 3. Package ONLY includes the cage for AirTag..

Wide Compatibility This V-Mount Clamp can be mounted to a tripod or light stand via the clamp, compatible with FXLION Sony V Mount batteries and most other V mount batteries that work as external power sources for DSLR cameras.. Versatile Mounting Options The V-shaped clamp has a maximum opening of 50mm, securely attaching to flat and curved surfaces or clamping onto a 15mm rod. Suitable for pipes, tripod legs, light stands, and hooks 15mm55mm range.. Quick Release System Features an easy push-or-pull lever design with a V-lock female mount quick release adapter, allowing you to mount and remove batteries instantly for seamless operation.. Durable High-Quality Build Made from aluminum alloy and stainless steel, ensuring strength, durability, and long-lasting performance.. Reliable Support Warranty Comes with 247 customer service and a 1-year warranty, providing peace of mind and professional support whenever needed..

Compatible with Arca-Swiss Plate NATO Rail The SmallRig V-mount battery plate features clamp interfaces for Arca-Swiss and NATO, offering direct compatibility with Arca-Swiss quick release plates and NATO rails. This enables a more efficient setup without the need for additional adapters, making your V-mount plate configuration faster and more streamlined. Rotatable V-Mount Design This v mount battery plate supports a rotation, enabling quick switching between horizontal and vertical mounting. It helps achieve optimal balance when mounting larger V-mount batteries and prevents interference with other accessories like rods or grips. Compatible with V-mount batteries e.g. VB99 SE VB99, this v mount battery plate supports long shooting sessions. Ideal for documentary filming, on-location shoots, and live streaming where reliable power is critical. Unobstructed Camera Operation Unlike bulky plates, the SmallRig v mount plate is designed to keep your cameras viewfinder and LCD screen fully visible. You get uninterrupted monitoring and seamless operation, even during handheld or gimbal use. Sturdy Construction Crafted from high-quality aluminum alloy and stainless steel, this v Mount battery plate is rust- and corrosion-resistant, making it highly durable and significantly extending its service life. Lightweight Portable Engineered for mobile photographers, this V mount battery plate kit measures just 2.9 2.9 1.2 inches and weighs only 3.8ozcompact and lightweight. It minimizes the bulk of your camera gear for easy storage and transport. Whether you're using it for Arca-Swiss plates or NATO rails, this V-mount plate integrates seamlessly into professional video setups.

Powerful VB004 Battery60Wh 4200mAh 14.4 V Premium lithium-ion without memory effect. FirstPower V mount battery provides ample power for long-duration video production and photography projects. Check the battery by pressing the power button and the five blue indicators will show the remaining battery level.. Bi-direction PD 45W Fast-ChargingFirstPower V-lock battery supports multi-protocol fast charging, supports high power USB-C bi-directional 45W PD fast charging, greatly reducing the charging waiting time.. Multiple Interfaces for Wide ApplicationThis V-mount battery is equipped with dual D-TAP, USB-C, USB-A and BP ports, making it compatible with a wide range of devices with related interfaces in the market, such as DSLR camera, camcorder, monitor, LED light, smartphone, tablet and laptop, etc.. Battery Safety ProtectionBuilt-in intelligent protection system to prevent battery overcharge, overvoltage, overcurrent and short circuit to ensure safety and stability. Compact, lightweight design 5.35x3.62x1.57 in, 1.05lb, easy to transport, suitable for air travel.. Buy with ConfidenceFirstPower V-mount V-lock battery provides a good backup power solution for photographer and filmmakers. Note One battery only, D-Tap cable or USB cable not included. If you have any questions or unclear about the product, please feel free to contact us..

Upgrade Super High Capacity vmount battery 20400mAh 300Wh Output 14.8V 15A Battery Type Polymer Li-ion Providing 3 times life time of original battery. Super high capacity and output V Series battery for Most Blackmagic Ursa Mini, Epic cameras and high power LED video light. Compatible with cameras using standard V Mount V Lock batteries. Compatible with HVR-S270C PMW-EX330K PMW-EX330L, PMW-580K PMW580L, PDW-680 PDW-700 PDW-850PMW-TD300,HDW-F900R HDW-680 HDW-800P, PMW-F55 PMW-F5,etc. Super-long lasting charge for each use and more than 500 full recharge cycles over life of the battery. Shorter Charging Time with Upgrade 5A Output D-tap Charger. Unlike other 2A output charger, our 5A upgrade charger can reduce a half charging time. Comes with a wall plug and charger for self-charging so no extra charger is needed. Power D tap Compatible, Independent 5V2.4A USB output, available to charge smart-phone,etc. 4-level LED indicator on the side to show remaining power. Durable Grade A Cell Battery ensures maximum lifespan and power. High performance and long lasting usage. Built-in circuit protection ensures both safety and stability over charging, short circuit, high temperature, and surge protection. CE FCC Certified. Charge with any standard V Mount charger or D-Tap charger. Buy with Confidence 24 x 7 email support. If you have any questions, please contact us directly. We are committed to resolving any situation in which our product does not meet your expectations.

Compact FX6 Cage - SmallRig FX6 Rig Kit is a lightweight and compact cage designed for videographers who prefer shooting on various scenarios such as tripods, handhelds, and shoulder rigs, etc. This complete FX6 cage kit solution provides both protection and attachment points for accessories.. With a Slidable V-Mount Battery Plate - Equipped with a V-mount battery plate and a cable that quickly switches among different scenarios without repeatedly disassembling and installing batteries. The V-mount battery plate supports slide up and down without blocking the memory card and BP-U battery installation.. Both V Mount and BP-U Battery Are Compatible - When using both, please note that the BP-U battery needs to be installed before the V-mount battery when installing, and the V-mount battery needs to be removed before the BP-U battery when uninstalling.. Dual Position Mounting Side Plate - The side plate is compatible with the original control grip when mounted on the rear, making it easy to expand your accessories, such as microphones and image transmitters. When mounted on the front, it can easily balance the center of gravity when shooting vertically.. Multiple Mounting Points - The FX6 cage includes built-in 14''-20 locating holes same as those in the camera, 14-20 threaded holes, 38-16 threaded holes, 38-16 locating holes for ARRI, and a cold shoe mount for the microphone, image transmitter, monitor, etc..

REVOLUTION OF MONITOR MOUNTThis field monitor holder of new design is 360 rotatable with 90 tilt that you have no need to loosen and tighten every time to find the right balance and with no danger of flopping around or breaking like it did with a ball head mount.. PROFESSIONAL DESIGNThis camera monitor mount is designed with standard hot shoe mount and 14 screw hole on the bottom for installing filed monitor, recorder, tripod, LED video light, flash light, GoPro camera, smartphone and other photographic accessories quickly on DSLR camera, cage, rig, handle, rail or stabilizer gimbal.. RETRACTABLE ARRI POSITIONING PINField monitor holder mount with retractable positioning pin, In addition to the universal 14 hole monitor, it is also compatible with the Arri positioning hole monitor, the lock is tighter and does not deflect, monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching.. POWERFUL MONITOR MOUNTThis field monitor mount is prerequisite accessory for installing the monitor on camera, also for other vlogging devices. Can perfectly works on monitor like Atomos Ninja V Flame 5 Atomos Inferno Flame 7, also can be used on camera cage or rig of Niceyrig GH5GH5S NATO rail handle.. WELL MADE AND DURABLEThis monitor holder is made by aviation aluminum, sturdy and durable, with a light weight of 75g but supports devices up to 2kg, It is perfect as it allows you to have the monitor at the perfect angle in seconds and a most secure platform for your field monitor..

HIGH CUSTOMIZATIONThe Wooden Grip is designed for Sony RX100 IIIIVVVAVIVII LCS2467 to provide comfortable grip and accessory mounts for RX100 series users. The Bracket comes with a wood handgrip for better shooting experience for vloggers youtubers filmmakers without block battery buttons. PERFECT PROTECTIONThe grip secures to the bottom of the camera via a 14 screw and features anti-twist flanges to prevent twisting. And Battery door is accessible with this grip attached. Also, it allows flipping the LCD screen and accesses all ports and buttons on the camera. ERGONOMIC HANDLEWooden grip on the right side adds the size of the camera grip which provides a better hand-held shooting experience. It is designed to increase the space between wooden grip and lens to ensure comfortable when holding. THREAD AT BOTTOMFeaturing four 14-20 accessory threads on the bottom so that you can attach a tripod or tripod plate to one of the threads without obstructing the battery door. SWEET DESIGN the bottom of the L-shaped handle comes with a slot for a carry strap. With the lightweight and compact features, it keeps the pocketable design of the camera. Related ProductIf you would like to control your camera by remote, you could search SmallRig SR-RG1 Remote Shooting Grip 3326.

Integrated Lightweight Power Solution Combines the SmallRig VB99 Pro V-mount battery with a foldable V-mount plate, providing a compact, efficient design for creators who prioritize portability and space-saving setups.. Bi-direction PD 100W Fast-Charging Supports PD 3.0 technology, the V mount battery VB99 Pro comes with 2 USB-C ports to deliver up to 100W of power. With a 100W and above fast charging GaN charger, you can have a full charged battery in just 2.5 hours. Note Please use a charger with PD protocol and charge this V mount battery through USB-C1 port. When charging by D-TAP, please note that the voltage should not exceed 16.8V and the maximum current should not exceed 8A.. Multiple Interfaces SmallRig VB99 Pro comes with 2 USB-C, USB-A, DC 8V, DC 12V, BP and D-TAP ports, a versatile V mount battery for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop and video light, etc. Additionally, it features a 14-20 and 38-16 threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp.. V-Mount Battery Plate with Ultra-Compact Design Engineered for Sony FX3 A7 IV A7S III, for Canon EOS R5 R5 C R6, and for Panasonic S5 GH5, for Nikon Z8, for Mirrorless DSLR cameras less than 111mm thick. This all-in-one power solution integrates seamlessly with your camera body. Its lightweight, modular structure eliminates bulky dual-tube systems, offering a low-cost expansion path for V-mount batteries, NP-F batteries, or power banks. Tool-free adjustments and a stretchable base ensure perfect balance for handheld or tripod setups.. Multi-Scenario Compatibility Rapid Deployment Featuring an Quick Release Plate for Arca-Swiss and built-in threading, this plate adapts to any rig configuration without tools. The rotatable V-mount bracket tilts 90 for instant access to side-flip screens, while the foldable design shrinks to pocket-sized portability. Perfect for run-and-gun filmmakers needing fast scene transitions between studio, field, and travel.. Palm Size, Huge Power Only 4.2 2.9 2.2 inches, weighs 23.3 oz, with a capacity of 6800mAh and can charge for MacBook Pro 14 for 1.3 times or for iPhone 15 Pro Max 5.5 times, for Nikon Z 8 approximately 6 hours. Please know that this V mount battery is 99Wh, which meets the requirements of the TSA100Wh to be taken on airplanes as carry-on baggage..

Bi-direction PD 100W Fast-Charging Supports PD 3.0 technology, the V mount battery VB99 comes with a USB-C port to deliver up to 100W of power. With a 100W and above fast charging GaN charger, you can have a full charged battery in just 2 hours.. Multiple Interfaces SmallRig VB99 comes with USB-C, USB-A, DC 8V, DC 12V, BP and D-TAP ports, a versatile V mount battery for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop and video light, etc. Additionally, it features a 14-20 and 38-16 threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp.. Palm Size, Huge Power Only 4.21 x 2.87 x 2.08 inches, weighs 19.4oz, with a capacity of 6800mAh and can charge for MacBook Pro 14 for 1.3 times or for iPhone 15 Pro Max 5.5 times, for Smallrig RC 60B COB approximately 3 times. Please know that this V mount battery is 99Wh, which meets the requirements of the TSA100Wh to be taken on airplanes as carry-on baggage.. Wide Compatibility Comes with a SmallRig Mini V-Lock Assembly Kit is a quick-release set based on the standard V-Lock, which can securely mount onto your cage or rig via its 14-20 screws. There are four 14-20 threaded holes on the Female V-lock, which you can attach other accessories. The V-lock with three M3 holes can be used as a replacement of the original V-lock comes with the V-Mount battery.. Real-Time Power Monitoring The SmallRig V Mount Battery comes equipped with a bright OLED screen, offering instant visibility into port status, voltage, power output, and remaining battery lifeeliminating any guesswork. Effortless Control, Single Click Wake the screen for real-time updates. Double Click Toggle between voltage and power displays. Long Press 3 Seconds Disable USB-C, USB-A, and DC ports to halt discharging. With intuitive controls and precise monitoring, the SmallRig V-Mount Battery ensures youre always in charge of your power supply.. Safe Reliable SmallRig V mount battery VB99 equipped with an intelligent Battery Management System BMS, protected against short circuit, over-temperature, over-voltage, over-current, over-charge and over-discharge. Certified by FCC MSDS UN38.3 IEC 62133 UL2054 UL62368, won't damage your equipment and camera. There is also worry-free 24-month warranty We Replace, Not Repair..

Bi-direction PD 100W Fast-Charging Supports PD 3.0 technology, the V mount battery VB99 Pro comes with 2 USB-C ports to deliver up to 100W of power. With a 100W and above fast charging GaN charger, you can have a full charged battery in just 2.5 hours. Note Please use a charger with PD protocol and charge this V mount battery through USB-C1 port. When charging by D-TAP, please note that the voltage should not exceed 16.8V and the maximum current should not exceed 8A.. Multiple Interfaces SmallRig VB99 Pro comes with 2 USB-C, USB-A, DC 8V, DC 12V, BP and D-TAP ports, a versatile V mount battery for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop and video light, etc. Additionally, it features a 14-20 and 38-16 threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp.. Palm Size, Huge Power Only 4.2 2.9 2.2 inches, weighs 23.3 oz, with a capacity of 6800mAh and can charge for MacBook Pro 14 for 1.3 times or for iPhone 17 Pro Max 4.5 times, for Nikon Z 8 approximately 6 hours. Please know that this V mount battery is 99Wh, which meets the requirements of the TSA100Wh to be taken on airplanes as carry-on baggage.. Real-Time Power Monitoring The SmallRig V Mount Battery comes equipped with a bright smart digital display, offering instant visibility into port status, voltage, power output, and remaining battery lifeeliminating any guesswork. Note the status button is only used to wake up the screen and check the battery condition, and cannot turn off the battery.. Safe Reliable SmallRig V mount battery VB99 Pro equipped with an intelligent Battery Management System BMS, protected against short circuit, over-temperature, over-voltage, over-current, over-charge and over-discharge. Certified by FCC MSDS UN38.3 IEC 62133 UL2054 UL62368, won't damage your equipment and camera. There is also worry-free 24-month warranty We Replace, Not Repair..

Integrated Lightweight Power Solution Combines the SmallRig VB99 V-mount battery with a foldable V-mount plate, providing a compact, efficient design for creators who prioritize portability and space-saving setups.. Bi-direction PD 100W Fast-Charging Supports PD 3.0 technology, the V mount battery VB99 comes with a USB-C port to deliver up to 100W of power. With a 100W and above fast charging GaN charger, you can have a full charged battery in just 2 hours.. Multiple Interfaces SmallRig VB99 comes with USB-C, USB-A, DC 8V, DC 12V, BP and D-TAP ports, a versatile V mount battery for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop and video light, etc. Additionally, it features a 14-20 and 38-16 threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp.. V-Mount Battery Plate with Ultra-Compact Design Engineered for Sony FX3 A7 IV A7S III, for Canon EOS R5 R5 C R6, and for Panasonic S5 GH5, for Nikon Z8, for Mirrorless DSLR cameras less than 111mm thick. This all-in-one power solution integrates seamlessly with your camera body. Its lightweight, modular structure eliminates bulky dual-tube systems, offering a low-cost expansion path for V-mount batteries, NP-F batteries, or power banks. Tool-free adjustments and a stretchable base ensure perfect balance for handheld or tripod setups.. Multi-Scenario Compatibility Rapid Deployment Featuring an Quick Release Plate for Arca-Swiss and built-in threading, this plate adapts to any rig configuration without tools. The rotatable V-mount bracket tilts 90 for instant access to side-flip screens, while the foldable design shrinks to pocket-sized portability. Perfect for run-and-gun filmmakers needing fast scene transitions between studio, field, and travel.. Palm Size, Huge Power Only 4.21 x 2.87 x 2.08 inches, weighs 19.4oz, with a capacity of 6800mAh and can charge for MacBook Pro 14 for 1.3 times or for iPhone 15 Pro Max 5.5 times, for Smallrig RC 60B COB approximately 3 times. Please know that this V mount battery is 99Wh, which meets the requirements of the TSA100Wh to be taken on airplanes as carry-on baggage..

UPDATED VERSIONThis is updated version Camera Cage for SONY DSC-RX100M3RX100M4RX100M5.Fit Perfectly on your Camera.. FIRST-CLASS MANUFACTUREPrecision CNC machined from top quality solid aircraft-grade aluminium,smooth surface and scratch resistant.. SPLENDID DESIGNWith the Camera Cage,you can also install or remove your battery easily.Quick release,turn and remount to your camera for either a horizontal or vertical shot.. STRONG COMPATIBLITYCompletely Arca-swiss RRS Berno KIRK Sirui compatible.Black anodized treatment for high durability. Connection screws made of stainless steel.. MOUNTING POINTSAll the needed allen wrench with be Attached..

LIGHTWEIGHT Design Accommodates Gimbals, Drones, and Handheld Rigs. HIGH CAPACITY V-Mount Batteries can Provide Higher Voltage for Longer Durations. UNIVERSAL Connection is Compatible with Most Camera Cages and Accessories via 14-20. COMPACT Design is Only Slightly Larger than a V-Mount Battery's V-Lock. DURABLE Aluminum and Stainless Steel Construction.

Multiple Interfaces This V mount battery comes with USB-C, USB-A, DC 5.5x2.1mm 8V, DC 5.5x2.5mm 12V, BP and D-TAP ports, which are more versatile and support powering multiple devices simultaneously, such as DSLR camera, camcorder, monitor, smartphone, wireless video transmitter, tablet and laptop, etc. It also has a 14-20 38-16 threaded hole on the V-Lock, you can hold it with a ball head or other clamp. Bi-direction PD Fast-Charging The built-in BMS intelligent chip of SmallRig V-lock battery VB99 supports muti-protocol fast charging such as PD QC SCP PPS APPLE-2.4A etc., it supports high power USB-C bi-directional PD fast charging up to 65W, making your charging faster. Sufficient V-mount Battery SmallRig V mount battery 3580 with high capacity of 6700mAh99Wh14.8V, built-in premium Li-battery to bring powerful battery life for long video making and photography projects, good power backup solution for photographers and filmmakers. Apart from this 99Wh battery, SmallRig also have VB50 50Wh V mount battery 3579Asin B0BQLV3W1F and VB155 155Wh V mount battery 3581AsinB0B6ZCNF1P, which would meet your needs for different capacities. Mini Portable V Mount Battery Palm size, only 4.21x2.87x2.08 inches, only 1.21 lbs, about 30 smaller than traditional V-mount batteries, feel free to carry outside and travel. And you can also keep track of the battery's working status at all times via its OLED screen. NOTE 1. When charging R5, R5 C, R6, R7, if there is no connection, please turn off the camera and unplug all cables, then unplug and re-plug the camera battery, then charge again. 2. When USB-A and USB-C are discharged at the same time, the battery output is 5V3A, when USB-C is charged and USB-A is discharged, the battery output is 5V3A 3. The power button is only used to wake up the screen and check the battery condition, cannot turn off the battery.

Bi-direction PD 65W Fast-Charging Supports PD 3.0 technology, comes with a USB-C port to deliver up to 65W of power. With a 65W and above fast charging GaN charger, you can have a full charged battery in just 2.5 hours.. Multiple Interfaces This V mount battery comes with USB-C, USB-A, DC 5.5 x 2.1mm 8V, DC 5.5 x 2.5mm 12V, BP and D-Tap ports, a versatile V mount battery for Sony Canon Nikon cameras, camcorder, for Ninja monitors and for SmallHD monitors, phones, tablet, laptop and video light, etc. Additionally, it features a 14-20 and 38-16 threaded hole on the V-mount backplate, allowing it to be secured with a ball head or other clamp.. Palm Size, Huge Power Only 4.40 x 2.83 x 2.11 inches, weighs 20.99oz, with a capacity of 99Wh 6800mAh and can charge for Canon R5C for 7.3 hours and for Nikon Z8 6 hours, for MacBook 16 Pro for 1 time or for iPhone 17 Pro Max 4.5 times, for Smallrig RC 60B COB approximately 3 times. Please know that this V mount battery is 99Wh, which meets the requirements of the TSA100Wh to be taken on airplanes as carry-on baggage.. Real-Time Power Monitoring The SmallRig V Mount Battery comes equipped with a bright OLED screen, offering instant visibility into port status, voltage, power output, and remaining battery lifeeliminating any guesswork. Effortless Control, Single Click Wake the screen for real-time updates. Double Click Toggle between voltage and power displays. Long Press 3 Seconds Disable USB-C, USB-A, and DC ports to halt discharging. With intuitive controls and precise monitoring, the SmallRig V-Mount Battery ensures youre always in charge of your power supply.. Safe Reliable Power This SmallRig V Mount Battery is equipped with an advanced Intelligent Battery Management System BMS, safeguarding against short circuits, over-temperature, over-voltage, over-current, over-charge, and over-discharge. Rigorously certified by FCC, MSDS, UN38.3, IEC 62133, UL2054, and UL62368, it ensures your equipment and camera are always protected. Backed by a 24-month worry-free warranty We Replace, Not Repair. Focus on your work without concernsSmallRig has your back.. Need other capacity You can look at 50 Wh battery SmallRig VB50Asin B0BQLV3W1F, 99 Wh batteries SmallRig VB99Asin B0B6Z9K42P, SmallRig VB99 ProAsin B0CLGQDFCG, 155Wh battery SmallRig VB155Asin B0B6ZCNF1P and 212 Wh battery SmallRig VB212Asin B0CYSW6R9P..

Designed for V-Lock Devices Fit for ALL cameras and LED lights with standard v-mount battery plates, compatible for Blackmagic Ursa Mini, RED EPIC, RED SCARLET cameras, Sony Video 4K Digital Cinema Cameras Broadcast DSLR, LED Light, Monitor, HDCAM, XDCAM and other camcorders that accept V type battery.. Widely Compatibility V-Mount battery for SONY camcorders HVR-S270C PMW-EX3, PMW-EX330K, PMW-EX330L, PMW-EX330R, PMW-320, PMW-500, PMW-580K, PMW580L, PDW-680, PDW-700, PDW-850, PMW-TD300, HDW-F900R, HDW-680, HDW-800P, PMW-F55, PMW-F5 5V2.4A USB output can supply emergency power for your tablet and mobile phone. And DC inout port for powering and charging devices auxiliary.. Ultra High Capacity With the capacity of 15000mAh, it lasts about 8-10 hours depending on the power of devices. Its high capacity enables the user or photographer to record the program or project totally and avoid the interruption of filming caused by power shortage.. 3 Charging Ports Charge with standard V-Mount type charger, D-Tap charger, or DC charger. And it allows the maximum charge voltage reaches to 16.8V, which benefits rapid charging. Charger is NOT included. Safety Battery All KUNLUN batteries have complied with CE, FCC, ROHS certified and standards, built-in intelligent protection board containing various technical protections such as overcharge, discharge, temperature control, over current protection, etc..

Palm Size with High Capacity Moman Power 95 V-Mount battery has a high capacity of 95Wh 6450mAh14.8V, which is plenty of power for long filmmaking and photography projects. Power 95 is therefore fits well into most of V-Lock fixtures, such as BMPCC, Camcorder, Camera, Monitor and so on.2 or more batteries will be better for filming device. Compact Design, Say Goodbye To BulkyCompared to a conventional 95Wh V Mount battery, the Power 95 weighs only 525g 1.15 lbs and measures 10.6x8.8x5.1cm 4.17x3.46x2 inch while maintaining the same capacity. Both in size and weight, the Power 95 has been reduced by almost 30, making it perfect for the filmmakers on the go.. Various Output for FilmmakersMoman Power 95 provides two D-Tap and two USB-A output for various camera gears including camcorders, field monitors, image transmitters, even charging tablets, smartphones and other mobile devices.. One Battery For Different PerformanceWith Maximum Continuous Current rating up to 10A, Moman Power 95 is powerful enough for 168 Watts multiple devices simultaneously during your shoot, which means you no longer need to change the battery all the time.. Aviation Friendly and LED Power IndicatorsAs a powerful Mini V Mount Battery on the fly, Moman Power 95 meets current ATA safe air transportation regulations. A 5-LED gauge of v mount battery indicates remaining charge level at the press of a button below the LEDs.. Intelligent Battery Management SystemMoman Power 95 mini V-Lock Battery is perfectly safe with Over ChargeDischarge, Over CurrentVoltage, Over Heat and Short Circuit protection. You don't have to worry about the use and safety of the battery..

FULLY DECODED FOR SONY NP-FZ100 This dummy battery replaces for Sony NP-FZ100 and works for Sony Alpha A7 V, A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II cameras. CONTINUOUS POWER SUPPLY The smallrig dummy battery power adapter allows you to use the D-TAP plug-in to continuously power your camera from an external power supply. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. However, it is necessary to pay attention to the fact that the dummy battery lasts for about 4 hours at a time, and then it will remind you that the battery level is too low, which is normal. You can restore this camera power adapter to full charge by unplugging and restarting it. NO WARNING Fully decoded battery adapter, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original camera battery, so there is no need to worry about it getting stuck. WORKS WELL WITH V MOUNT BATTERY This dummy battery power adapter works well with most of V mount battery on the market with the D-TAP output. And we recommend using it with SmallRig V mount battery. SmallRig V mount battery has over-current and over-voltage protection, so don't worry about damaging your camera. SAFE RELIABLE Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable.. HOW TO USE ?Connect the dummy battery to V mount battery Insert the powered dummy battery into the camera battery compartment correctly Close the battery compartment cover. Please follow the installation steps when using. If the camera battery compartment is not closed, the power adapter will not work normally..

65W PD3.0 Output The KF Concept 50Wh V-Mount Battery supports 65W PD fast discharge and 45W fast charge, allowing you to charge your camera, laptop, or tablet quickly. Fully charge your battery in just 2 hours for more shooting time without the wait.. Multiple Interfaces for Versatile Applications Equipped with USB-C, USB-A, DC 12V, BP, and D-TAP ports, this v lock battery powers multiple devices at once. Perfect for DSLR cameras, camcorders, monitors, and more, giving you the flexibility to stay powered on set.. Real-time Status TFT Display The clear TFT screen shows real-time battery status, so youll always know your charge levels during shoots. Stay informed and in control at all times.. 50Wh High-Capacity for Extended Use With 50Wh 3400mAh14.8V, this v mount battery offers long-lasting power, making it ideal for extended photography and video sessions. Keep shooting longer without worrying about running out of power.. Compact Travel-Friendly 30 smaller than traditional V-mount batteries, this compact 4.25 x 3 x 2.26-inch battery weighs just 12.35 oz. Its lightweight, pocket-sized design makes it airline-friendly and easy to carry, perfect for on-the-go creators. Built-in BMS technology ensures optimal performance and safeguards against short circuits, overcharging, overheating, and more..

Lighting Kit The two 120W LED lights can be adapted to more scenes, and can also use the area lighting method to give the subject a sense of texture, three-dimensional and perspective, cooperating with other light sources in the scene.The equipped V-mount battery plate provides longer battery life for lights, making the shooting process more secure and stable. The attached bag reduces the burden of mobile photography.. High Brightness LED Light The 120W light could offer 4,450 Lux1M 3.3ft without the reflector and 52,800 Lux 1M 3.3ftwith the hyper reflector package include, while other ordinary 100W150W video light can only reach 34,300Lux 1M. It's a great continuous light for YouTube videos, live streaming, vlog shooting, cinematographer, etc.. Silent Cooling Fan and Bowens Mount The built-in silent cooling fan runs automatically when the light is over 60 140F. The sound heard within 1m of the fan reaches only 30dB 2dB, just like a quiet night in the countryside. The bowens mount allows you to add any modifiers within the load-bearing range like the parabolic softbox 3585, while getting a professional look.. Precise Lighting Adjustment and Wireless Control CRI 95, TLCI 96, color temperature of 2700K-6500K and 9 light effects adapt to multi scene shooting needs. In addition to manual control, you can adjust the brightness from 0 to 100 through the mobile phone via the SmallGoGo App, and the light effects. Two power supply modes are supported ? direct power supply from AC power adapter. Powered by a 14.4V26V V-mount battery Package not include. Package includes V-mount battery plate 3676.. Packing IncludesRC 120B lights x2, Power cords x2, Power supplies x2, 55 hyper-reflectors x2, V-mount battery plate x1, Protective covers x2, Light bag x1, Instruction x1, SmallRig cultural stickers x1. SmallRig video light kit includes a one-year warranty..

FOR SELECTED CAMERASSmallRig 3323 is a Thread Top Handle with Record StartStop Remote Trigger for Selected Cameras. It is equipped with three control cables, supporting for Sony A7A7RA7SA7IIA7RIIA7SII A7SIIIFX3FX30A7IIIA7RIII A7R V A7 IV A7R IVA9A9 IIA5100A6000A6100A6300A6400A6500A6600RX100 IIIRX100IVRX100VRX100 VIRX100 VII, for FUJIFILM X-T3X-T4X-T5X-T20X-T30, for Panasonic S5S1S1RS1HBS1HGH4GH5GH5SGH6G9G95, and for Z CAM E2-M4 E2- S6BGH1. REMOTE CONTROLThe top handle features a top-mounted startstop record button placed where your thumb would normally rest. It provides convenient record startstop control for a stable and comfortable shooting experience. 3 CONTROL CABLES INCLUDEDThe handle kit includes 3 different control cables 1 x for Sony control cable, 1 x for Fujifilmfor Panasonic control cable, 1 x for Panasonicfor Z CAM control cable. Different cameras correspond to different control cables. MULTIPLE MOUNTINGSIts top features 14-20, 38-16 threaded holes, and a cold shoe for Monitor Mount 2904 and 2905. With the allen wrench built-in on the top of the wooden handle, it is easy to re-tighten the thumbscrews for security. ERGONOMICAL DESIGNErgonomically designed, all-in-one wood handle improves grip experience. The side handle can be adjusted up and down based on your needs. Longer Cable 3407 is sold separately to your shoulder kit for Sony cameras.

99Wh Powerful Capacity. The mini V-mount battery equppied with 99Wh, 14.8V, 6700mAh high capacity, providing longer video production and photography projects.. Clear OLED Screen. With an OLED display that allows you to check the battery status, such as, time remaining, percentage of charge remaining, voltage indication and working status of the USB-A and USB-C ports.. 65W Bi-directional PD fast charging. It can be charged via BP, D-tap and Type C port, supports multi-protocol fast charging PDQCSCPPPSAPPLE-2.4A, etc. Supports up to 65W high-power USB-C bidirectional PD fast charging, which allows you to charge smartphones, tablets, or laptops.. Multiple Interfaces. This V-Mount battery with USB-C, USB-A, BP and D-TAP ports is more versatile and supports powering multiple devices at the same time, such as DSLR cameras, camcorders, monitors, smartphones, wireless video transmitters, tablets and laptops.. Easy to Carry. You can take this mini-V mount battery on the airplane. Palm-sized for easy portability and ideal for most V-mount fixtures and D-Tap, USB-A or USB-C..

Standard V-Lock QR SetSmallRig Mini V-Lock Assembly Kit MD2801B is a quick-release set based on the standard V-Lock, which can securely mount an accessory onto your cage or rig. The kit includes a V-lock base station and a V-lock wedge that interconnect to secure an accessory.. Mounts with 2 X 14-20 ScrewsThe base 2801 mounts onto your cage or rig using the two included 14-20 captive screws. The V-shaped wedge mounts onto your accessory, or it can replace the wedge on your V-mount battery.. Comes with Various Mounting ThreadsThere are two 14 -20 mounting holes on the Female V-Dock, and you can attach this assembly directly to a SmallRig camera cage kit, SmallRig monitor frame, or SmallRig shoulder pad mount. The V-Lock with three M3 holes can be used as a replacement of the original V-Lock comes with the V-Mount battery.. Lightweight PortableWeights only 48g1.69oz, the two components are made from durable aluminum. In addition, you can mount this assembly kit to SmallRig battery hinge MD2802 which is designed for adjusting angle of the battery with this setup to power all the accessories, which minimizes camera weight.. Sweet DesignIt inserts into the base for a secure fit and can be quickly unmounted using the quick release lever on the base. An Allen wrench is included to tighten the screws..