Tool-Free Quick Installation This V mount battery plate integrates a baseplate for Arca type and a V-lock, which can quickly install mirrorless DSLR cameras and V mount battery without tools Stretchable design, so that this baseplate can be stretched up to 36.5 mm 1.43 inch. All-in-One mounting solution for Sony FX3 A7 IV A7S III, for Canon EOS R5 R5 C R6, for Panasonic S5 GH5, for Nikon Z8, and for mirrorless DSLR cameras less than 111mm thick.. Modular Anti-deflection Design A detachable plate for Arca-type at the bottom allows quick switching between handheld and tripod shooting and is interchangeable with other quick release plates. After removing the plate for Arca-type, there are 14-20 and 38-16 forward screw holes at the bottom. When installing for Manfrotto plate and tripod, this two-point locking design can prevent deviation.. Foldable Lightweight Design The V mount battery plate can be folded and adjusted by 180. Fold forward for convenient storage, makes it very compact, only 3 cm thick and weigh 230g. Fold backward for enough space to open the camera flip screen. This design does not need you to remove the battery first, which saves time effectively. Perfect for run-and-gun filmmakers needing fast scene transitions between studio, field, and travel.. Gear structure pivot dampening The gear locking structure is adopted between the baseplate and the V mount battery plate. After install the V mount battery VB2121345g, it will not shake even in running shooting, which is more stable. After loosening the lock, its damping rotation design can also prevent sudden fall and ensure the safety of the equipment.. Ergonomic Design With the buckle design, the camera can be easily locked and removed even with a large lens, without blocking the lens. The V mount battery plate locking knob is designed on the left side, which is more in line with the actual use requirements.. More Possibilities for Expansion The built-in 14-20 threaded holes and a mini V-mount plate provide more expansion solutions by attaching a NP-F battery plate 3168B, mounting a power bank holder BUB2336, or installing a wireless video transmitter with magic arm 3874..

For DSLR Mirrorless Camcorder The SmallRig multifunctional teleprompter 3646 is designed to accommodate any iPad or tablet up to 11 inches. Please note that it is not compatible with smartphones. This camera teleprompter provides a convenient solution for staying engaged in video conferences or livestreaming without having to look away from the camera at notes on a separate screen. Recommended reading distance - within 5m 16.4ft.. Must Work with 15mm LWS Baseplate To ensure proper functionality, this teleprompter must be used with a 15mm rail support system separately available ID 2092B 3067. This setup helps to alleviate pressure from the lens and protect the camera lens mount.. Wide Lens Compatibility The teleprompter can be mounted to the lens using the included silicone cover, which supports lenses with a diameter between 49mm and 95mm. There will be no vignetting when the focal lengthis equal to or greater than 22mm.. App Control The SmallGoGo App, available on Apple Store and Android Market, allows you to extract text from PDFs, pictures, Word documents, and TXT files, making them editable for use with the teleprompter.. Modular Design The lens hood can be quickly released for cleaning purposes. The teleprompter comes standard with a top flag to prevent glares and ghosting in complex environments. Additionally, it includes a 4 x 5.65 standard filter adapter for adding filters..

Quick Release Design Lightweight and FoldableUsing the original developed quick release structure, it can be quickly installed and removed in just 15 seconds. The SmallRig parabolic opening size is 21.6 x 14.6 in it's foldable for easy storage, weighs only 1.1 kg and comes with a storage bag for easy portability. This is a very handy lightbox for those who use at multiple shooting locations.. Enhancing the Shooting EffectThe softbox adopts a two-layer cloth structure made of Oxford cloth and high-grade reflective materials, with multi-layer coating. It is reliable and reflective, while maintaining the original color temperature and color Rendering Index CRI while spreading the light more evenly and wider for improved shooting results.. High DurabilityThe SmallRig light softbox is supported by 16 ribs that form a rounded surface for a specific depth of surface effect. It adopts military umbrella ribs, which are lightweight and reliable, high elasticity, and can withstand tens of thousands of presses without deformation. In addition, all the ribs of the umbrella are attached to the outside, which gives a smoother and more uniform coating effect on the inside, and does not affect the reflected light function inside.. Adjustable Light DirectionSmallRig softbox comes with 2 pieces of high-quality diffuser cloth and 1 piece of fabric mesh the beam angle is concentrated at 45 , which can be freely combined when using, and can play a positive role in various situations. For example, it can be applied to portrait photography, studio photography, LED video light photography, flash photography, etc.. Wide Compatibility and Package IncludesNot only SmallRig video lights RC 120D RC 120B RC 220D RC 220B, but also other bowens mount standard led light, COB light and video light can be attached to our softbox. The package Includes 1 x Softbox, 1 x Honeycomb, 1 x Internal Diffusion, 1 x External Diffuse, 1 x Carry Bag, 1x User Manual..

Tabletop Overhead Mount Stand The SmallRig desktop support kit is designed for indoor live streaming, desktop photography, video conferences, and any scenario requiring desktop shooting needs, and supports various devices such as cameras, cell phones, lights, microphones, etc. Flexible and Quick Adjustment The bracket is equipped with a modular metal knob for one-touch locking of height and angle. The main pole can be adjusted from 30 to 73cm in height, while the secondary arm is adjustable in length from 30 to 50cm. Additionally, the secondary arm offers a 360 infinite angle adjustment, allowing for flexible tilting angles to meet various shooting scenarios and needs. High Load-Bearing Capacity This desktop bracket features thickened pipe walls, widened base, and a gear structure design, allowing it to bear up to 2kg, ensuring stability and preventing deviation. High Compatibility The bracket's top features 14-20 and 38-16 threaded holes, while the extended arm is equipped with a detachable 360 ball head. Capable of accommodating two devices simultaneously, this setup offers a convenient solution for tabletop shooting scenarios. Quick Installation and Disassembly The extension pole is detachable and retractable, enabling quick setup and storage. Additionally, the extended arm can move on the main pole without the need for disassembly, facilitating unobstructed adjustments. Note Base can be mounted on surfaces with thicknesses ranging from 1 to 6 cm 0.4 to 2.3in.

Compatibility SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal coldhot shoe mount. Lightweight Only 124g Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone. Built-in Cold Shoe Mounts It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. Mounting Points SMALLRIG Camera Grip has an abundance of 14-20 and 38-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble. Related Products 38-16 locating holes support Monitor Mount 2903, 2348 to attach monitors 14-20 threaded holes support Magic Arm 2070 for monitors.

Basic Cage Kit for BMCC 6K SmallRig 4574 comprises a cage, a lens mount adapter support, a top handle for ARRI-style, an SSD mount bracket, and a clamp for HDMIUSB-C cable. Please note The cage is exclusively designed for BMCC 6K, NOT for BMPCC 6K or 6K Pro.. Full Cage to Half Cage Convertible SmallRig 4574 is designed to provide creators with a comfortable low-angle shooting experience, protect the camera, and offer multiple accessory expansion options. This included full cage designed specifically for Blackmagic Design Cinema 6K can be transform from full cage to half cage for enhanced versatility, making it easier to balance when used with a stabilizer.. Three-Point Locking System Three-point locking system secures the camera via two 14-20 screws at the base and a 14-20 screw on the top, while integrated silicone pads prevent scratching. The cage provides unobstructed access to all camera interfaces, card slots, the flip screen, and the battery compartment.. Versatile Mounting Options Constructed from protective aluminum alloy, this cage features 14-20 threaded holes, 38-16 threaded holes, locating holes for ARRI, cold shoe mounts, NATO rail, QD mounts, the kit accommodates SmallRig accessories such as Monitor Mount 2903, Side Handle 4015, NATO Side Handle 3847, Baseplate 3357, LED Video Light 3286, Microphone 3468, Rod Clamps and more.. Top Handle, SSD Mount Bracket The ergonomic top handle for ARRI-type offers creators a comfortable low-angle shooting experience, facilitating camera operation. Additionally, the included SSD mount bracket with a built-in cold shoe mount allows for quick assembly and disassembly, compatible for Samsung T5T7 SSDs.. Secure Lens Mount Protection Signal Transmission The lens adapter support is compatible for Sigma MC-31, for Sigma MC-21, and similar adapters, safeguarding the camera mount from damage. The kit also includes a clamp for HDMI USB-C cable to protect the camera ports and prevent signal loss during transmission..

Multifunctional Desktop Stand The desktop light stand is equipped with a 14 ball head and a ring light adapter, which can be used for ring lights, DSLR cameras, smart phones etc. Suitable for beauty shooting, live broadcast work, interviews, etc.. Height Adjustable Camera Table Mount The camera light stand is designed with 3 sections extending poles. You can adjust the height of the stand according to your own shooting needs. The height adjustment range is 19-39 48.5cm-100cmNote height with ball head and C-Clamp. The operation is simple, and the rubber ring wingnut helps you easily adjust and fix the length of the support rod.. Angle Adjustable Camera Table Stand Thanks to the ball head 14 screw, you can freely adjust the angle of the product, so as to achieve 360 panoramic rotation shooting. -9045 front tilt for multi-angle adjustment, this design helps you to easily adjust the equipment without disassembly. The maximum load capacity can reach 6.6 pounds3kg.he ball head is detachable, you can remove it to equipe another device of 14-20 threaded hole, for exemple 14-20 fluid head.. Desk Camera Mount There is a width adjustment button at the bottom. This design can help you adjust the width of the camera bracket to adapt to tables with different thicknesses. It is suitable for tables with a thickness of 4.7cm 1.85. Compared with the traditional light tripod, this product is more save space. Lightweight Desktop Camera Stand The table camera stand is made of aviation aluminum alloy and has a long service life. The matte surface is easier to clean. It weighs only 15 ounces430 grams, making it easy to carry.

Wide Compatibility This camera tripod is universally compatible with cameras and devices with 14-20 and 38-16 threaded holes, such as DSLR cameras, action cameras and mirrorless cameras, etc. It can also be used with cell phones and projectors. NoteFor cameras with telephoto zoom lens, you need to purchase additional tripod mount ring or telephoto lens mount for better balance.. 2 in 1 Tripod Monopod You can easily turn the aluminum tripod into a monopod according to your needs, this tripod is a good companion for your hiking or traveling.. Angle AdjustableThe specially designed 36mm metal ball-head can rotate 360 degree allowing you to take photos at any angle with horizontally and vertically. And the central pole can be inverted to allow for low angle shooting and macro photography.. Height Adjustable 4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 16 to 71 in seconds. 16.9 folden size is easily took to anywhere for outdoor photography.. Load Bearing and Innovative Design The dslr tripod offers high level of stability using great quality level of magnesium aluminum alloy. The net weight of the tripod is 1530g, it can withstand up to 33 lbs15 kgverticalor 11 lbs5 kgtilt. Different from other tripods, this tripod has Three 14 threaded holes added to the bracket, which can meet the needs of external magic arms, mobile phones, monitors, etc..

Quick Release Module The filter frame and side flag can be installed removed in 1 second through the sliding slot. The adapter ring can be quick disassembly and assembly with circular filters that size up to 92.5mm. Compatibility 1. compatible with 95mm cinema lenses, but NOT compatible with 95mm micro lenses 2. Standard 52-55-58-62-67-72-77-82-86 lenses and circular filters with a max size of no more than 92.5mm 3. Filters with a thickness of 4mm, a size of 4 x 4, 4 x 5.65, regardless of filter brand.

Quick Release Monitor Mount SmallRig quick release monitor mount comprises a quick release plate and a cold shoe mount. The quick release plate allows for quick and easy vertical release and setup monitors. Cold shoe on the bottom, which fits camera hot shoe or shoe mount on camera rigs such as camera cages or handles. 360 Swivel 170 Tilt The camera monitor holder enables to swivel 360 sideways and tilt 170 with free-stop in any positions and angles you preferred. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. Besides, its damping of pivot is adjustable through spanner. For 5 or 7 Monitor SmallRig monitor mount 3514C is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone, and the quick release plate is reserved for 2 optional dowel pins, which can be removed and installed as needed to effectively prevent the devices from deflection. Tightness Adjustable The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew and each axis for further secure.. Durable Reliable This quick release monitor holder made of Aluminum alloy, sturdy and durable for a long use. It features a maximum dynamic load capacity of 1.5 kg, supports most monitors and smartphones in the market. And its built-in rubber pads to prevent scratches and increase friction.

Compact DesignSmallRig Mini Follow Focus 3010C is designed for easy and quick focus control in video shooting. It is compatible with most cameras like DLSRs and mirrorless Cameras. In addition, it features a super lightweight design with only 204g7.2oz, is compact and portable, and is easy to carry outside.. Easily Adjustable AB StopsThe AB hard stops of the follow focus are adjustable, you can adjust the suitable AB focal length according to your shooting needs. Moreover, by turning onoff the AB stops lock, you can easily switch focal length between 360 unlimited zoom and AB focal length.. Anti-Slip Anti-Sweat DesignThe Mini Follow Focus F40 imitates a sports car hub, adopts an anti-slip and anti-sweat design, and its excellent damping feeling and ergonomic design helps to control the focal length you need more accurately and comfortably, thus realizing a better shooting.. Modular DesignFollow Focus F40 adopts a modular design that allows for rapid and easy assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp with NATO rail 3011 allow for attaching other SmallRig accessories to improve the compactness of your equipment.. Multiple Shooting ScenesThe installation angle of this follow focus can be adjusted and supports handheld, tripod-mounted, and other shooting scenarios. Furthermore, using the included snap-on gear ring belt and interchangeable M0.8 gears standard M0.8-43T gear, optional model M0.8-65T gear 3200, M0.8-38T gear 3285 enables compatibility with different diameters of lenses and achieves diversified shooting.. Additional GearsYou could choose additional gears to help achieve a better shooting experience SmallRig Seamless Focus Gear Ring 329132923293329432953296418541864187. Included Storage BoxComes with a compact storage box for easy carry around with you..

Upgraded Design The ball head of SmallRig Mini Tripod is finely laser-engraved in 5 increments from -0-330 for tracking progressive panning, 3 position leg angle adjustment system provides flexible shooting, ideal for multi-shot panoramic photography. PLEASE NOTE we do not recommend you to adjust the screws of the leg. It can only stand in place when the leg in 130. If you want the tripod legs angle notcheslocks, please turn to BUT2666B0833XY83V. QR Plate for Arca-Swiss The mini tripod comes with a clamp compatible for Arca-Swiss and plate for quick release and mount. With rubber-padded mount QR plate to protect your camera from potential scratches. High Stability Made of aluminum alloy, The legs support up to 44 lbs and the ball head bears up to 4.4 lbs while weighing only 0.89 lbs. The rubber tripod feet prevent the mini tripod from sliding and protect delicate surfaces, which rival traditional spikes to stabilize the tripod on soft terrain. 360 Degree Swivel Tripod Head Ensure 360 degree horizontal rotating and from -90 to 45 degrees tilting for panoramic photography when adjusting the angle. Solid Base Support The rubber feet prevent the mini tripod from sliding and protect delicate surfaces, which rival traditional spikes to stabilize the tripod on soft terrain.

Widely Compatible Lenses SmallRig Wireless Follow Focus Kit Lite 4296 is designed to provide a precise and low-latency focusing experience for video shooting. It is compatible with a wide range of cinema and zoom lenses with high damping, such as CP. 3 35mm for ZEISS, Arles 50 75mm F1.4 FF VV for DZOFilm, CN-R35 T1.5 L F for Canon, FE C 16 - 35mm T3.1 G for Sony lens, etc. Peak Torque of 4.3 kgf.cm The receiver motor adopts a variable speed gear set design, which can provide a high torque output of 4.3 kgf.cm. Compared with the previous generation product, the torque peak is increased by more than 2 times, and the response efficiency is increased by 35, making it easy to drive the zoom lens. Up to 21H Battery Life The handwheel is equipped with a built-in 1400mAh battery and adopts smart sleep tech for long-lasting power, which can provide about 21h of ultra long battery life. The Receiver Motor supports a wide voltage input range of 5V-18V, compatible with PD and QC fast charging protocols. Please use the provided power cord or a USB 3.0 cable to avoid insufficient torque issues. User-Friendly Design The wireless follow focus kit uses two light colors, red and blue, to indicate the connection status and channel blue light-F00-1 green light-F15-1, and provides intuitive operation instructions. The control is simple and efficient, making it easy for beginners to get started. One-Click Lens Calibration The Handwheel supports one click AB dotting, and you can adjust the appropriate AB focal length according to your shooting needs. The kit features a memory storage function, eliminating the need to recalibrate lens travel and AB point settings in case of power loss, enhancing shooting efficiency.

Magnetic Quick-Release for MagSafe SmallRig phone mount plate 5155 is designed for iPhone models with the function for MagSafe.Securely attached to your phone for instant attachment detachment. Effortlessly switch between filming, outdoor selfies, and monitoring without interrupting your workflow.. Multiple Expansion Interfaces Equipped with multiplecold shoe mounts and 14-20 threaded holes to simultaneously attach wireless microphones like for DJI Mic 2 and ball-head selfie sticks magic armsperfect for creators needing audio and camera control in one sleek setup.. Complete Creator Toolkit in Your Pocket Master indoor live streams, outdoor vlogs, smartphone filmmaking, and teleprompter setups. Transform your phone into a professional multi-accessory studio instantly.. Lightweight and Portable Aerospace-grade aluminum alloy with hollow-cut design reduces weight to 41g1.4oz, 59x59mm size fits in any bagessential for mobile creators needing on-the-go flexibility.. Note 1.External impacts may cause the device to detach. 2.If using with a phone case, ensure a secure connection..

Classic Universal BaseplateSmallRig Baseplate with Dual 15mm Rod Clamp 1674 is a simple and light base plate for the currently popular cameras and camera cages, such as for Sony A6500A6300A6600, for Sony A7SIIIA7RV ZVE-10, for Canon R5 R6, for Fujifilm XT-5, etc. The baseplate assists the camera to switch quickly between the tripod, shoulder, and other shooting modes.. 15mm LWS Rod SupportThe base plate features 15mm diameter and 60mm spaced rod holes that allow you to mount a follow focus, matte box, lens support, or other accessories. The plate is contoured to fit with shoulder pads while also remaining lightweight.. Scientific Thread ArrangementWith 14''-20 38''-16 threads on the bottom, this base plate can be attached to quick release plate and then be attached on any tripod such as SmallRig FreeBlazer Carbon Fiber Tripod 3989 not included.. Easily Attachment on CamerasCagesThe base plate comes with 14 and 38 screws and can be used on the camera cages, or directly on cameras. This solid baseplate features rubber padding on top of the plate to prevent twisting and scratching.. What You Get1 x base plate 1 x 14'' fixing screw 1 x 38'' fixing screw 2 x 14''-20 screw 1 x hex spanner.

One Click Switch Between HorizontalVertical This kit adopts a 90 swivel limit design, which does not require disassembling the camera, does not change the lens optical axis, and can quickly switch between horizontal and vertical shooting. Wide Compatibility This kit is compatible with most mirrorless cameras and lenses, including for Sony, for FUJIFILM, for Nikon, for Canon, for Panasonic. It can be used with or without cage. It has strong versatility, camera body can be mounted by the included quick release plate for Arca-Swiss, cage can be slid in directly using the bottom quick release plate for Arca-Swiss.. Modular Design SmallRig Horizontal-to-Vertical Mount Plate Kit adopts a modular design with a simple structure. The horizontal and vertical lens collar support can be quickly disassembled, making it portable and easy to store. Full Access Design SmallRig 4349 maintains full access to LCD flip screen and ports and features built-in pads that prevent scratches and twist. Note Horizontal shooting may interfere with the use of the aperture ring and AFMF buttons on the lens. With Plate for Arca-Type The included quick release plate for Arca-Swiss features an anti-twist design for stability, and is compatible with the lower quick release plate for DJI RS series stabilizers. Besides, there is a magnetic dual-head wrench in the baseplate for easy installation and release. And the plate is not universally compatible with slots for Arca, but it can be used with plates for Arca featuring anti-slip grooves..

Highly Customized Rod ClampSmallRig Super Lightweight 15 mm-Rail block 2061 comes with two rod clamps, which feature two 15mm rod holes to fix 15mm rods and can be mounted on a platecage via included screws for extension needs.. Standard 14-20 ThreadsThe 15mm rod clamp comes with standard 14-20 holes on it and has a standard 9mm space between two holes.. Easy to Fix with 14 ScrewsIt provides two short 14 screws 8mm and two long 14 screws 18mm to help fix this rod clamp on cageplatehandles then attach extra gears.. High-Quality MaterialThe rod clamp is made of high-quality aluminum alloy, light but stable when used. Spring Ratchet Wingnut is to tighten the rod and re-position in narrow spots where youre not able to fully turn them.. SpecificationsPackage included 2 x 15mm-railblock, 4 x 14'' screwshort, 4 x 14'' screwlong, 1 x Hex Spanner Material Aluminum.. Related ProductsIf you need 15mm aluminum alloy rods when supporting your equipment, go for SmallRig 1053, SmallRig 1049..

Comfortable Foam Pads Made from high density, elastic foam with a PU leather coating and nonslip texture, the ergonomic shoulder and back pads deliver stable support to reduce fatigue during long shoots. The shoulder pad attaches via touch fasteners and can be reversed for left or right shoulder mounting. Self Adjusting Back Pad A spring loaded mechanism allows the back pad to automatically contour to your body based on pressure and contact. With 55mm of horizontal adjustment, it adapts to various body types for enhanced comfort and fit. 15mm Dual Rod Clamp The clamp secures two 15mm rods to connect accessories compatible the 15mm LWS rod rail system, including NEEWER SR007 Shoulder Rig, SR015 Camera Baseplate, and PG001 Mini Follow Focus. Also compatible with SmallRig shoulder stabilizer rigs. Diverse Mounting Points Featuring several 14 threads, a 38 thread for ARRI, and an NATO rail, this support enables attachment of various accessories, such as the MA004MA005 Monitor Mount, ST15 Magic Arm, GA010 Phone Tripod Mount, and more as content creator essential and influencer must have camera photography gear. V Mount Battery Plate The built in quick release V mounting battery clamp plate can attach a V lock camera battery for prolonged outdoor power supply. Compatible with NEEWER PS099EPS099EPPS150EPS050EPS099S V mount battery models.

FOR TRIPOD SHOOTINGThe tripod adapter plate with V-wedge front is for Sony VCT-14 standard, you can use with standard VCT-14 shoulder plate, such as SMALLRIG Shoulder Plate for Sony VCT-14 - 2837. SAFETY LOCKING SYSTEMThere is no slack and the camcorder is locked solidly to the baseplate since a spring-loaded rear pin is equipped to provide resistance when youre pulling the camera on and off and prevent from potential sliding off. QUICK RELEASE INSTALLFeatures a safety release lever on the side for quick release, and its completely hands-free to lock into place. EXTRA MOUNTING HOLESComes with plenty of 14-20 and 38-16 threaded holes on the bottom for adapting different quick release plate. FULL-METAL CONSTRUCTIONAll-metal construction is extremely solid, which reduces the potential risk of breaking. Meanwhile, the smooth coating allows sliding inside easily.

Universal BaseplateThis base plate features a removable a 38-16 and a 14-20 screw on top, suitable for tripodgimbal shooting, and can be used on multiple cameras, such as for BMPCC 6K 4K, for Canon R5 R6, for Sony A7SIII A7III FX3 cameras, etc.. 40 Lighter Than Traditional PlateThe riser system is made of Magnesium Alloy, a new material, which is stronger but 40 lighter than aluminum alloy. The whole riser system weighs only 269g9.35oz while the aluminum one weighs 415g14.6oz.. Standard Riser SystemDesigned to work with magnesium alloy cage 3065 and to ensure that the distance from the center of the lens to the center of the rods is 85mm. Comes with a detachable pad to adjust the height according to shooting requirements.. Quick Release DesignThe plate for Manfrotto standard is quickly disassembled and assembled via the lever. The bottom of the 3067 is a standard quick-release plate for Arri-style interface and reserves multiple 14-20 and 38-16 threaded holes.. Package Includes 1 x Baseplate 1 x 14-20 Screw.

Lens Filter Kit IncludesSmallRig 5-in-1 magnetic filter kit 4726 includes 67mm VND, 67mm CPL, 67mm Black Mist filter, threaded adapter ring, magnetic lens cover, cleaning cloth, and storage bag.. Magnetic Variable ND2-ND32 Lens FilterSmallRig magnetic 67mm VND filter features 5 stops of exposure brightness, from ND2, ND4, ND8, ND16 to ND32 1-5 Stops. Balance exposure times by rotating the outer polarizer to reduce the amount of light when shooting rivers, waterfalls, traffics, etc.. Magnetic CPL FilterSmallRig 67mm magnetic circular polarizing filter can eliminate reflection from non-metallic surfaces such as lakes, windows, waterfalls, glass, buildings, etc. and thereby improve image saturation. Also can enhance the contrast and saturation of the picture, making the sky bluer and the water more clearer.. Magnetic Black Mist FilterSmallRig 67mm magnetic black mist diffusion filter softens high light intensity and lowers the contrast and sharpness of your shot, creating a dreamy and romantic effect without losing shadow detail. Perfect for portrait photography, video recording and vlog videos.. Magnetic DesignThe 67mm VND CPL Black Mist filter via magnet attraction to install and remove the filter. Enhanced magnetic attraction is safe and reliable, and photographers can quickly and efficiently switch filters according to different needs for light.. Camera CompatibilityThe kit comes with a 67mm threaded filter ring, which can install the magnetic filters on a 67mm camera lens, providing a convenient magnetic filter installation experience for camera lenses.. Phone Cage CompatibilityCompatible with SmallRig mobile phone cages 4407 4391 4396 4473 4392 4397 4393 4398 for iPhone 15, 14, 13 series and for Samsung S24 Ultra 4601 by matching with 67mm M mount filter ring ID 4587 T mount filter ring ID 4585. Note The M mount T mount filter ring is not included and can be purchased according to actual needs.. HD Optical GlassThe lens filters is made of premium AGC optical glass and true color film, which increases the light transmittance while achieving ultra-low color shift and producing accurate colors. Multi-layer double sided Nano coating makes the filter Waterproof, stain-resistant, oil-proof and scratch-resistant..

It is the new version of carbon fiber rod with the more smooth surface.. It fits 15mm rod clamp but its surface is not shiny anymore because we have redesigned it based on some customers' advice.. The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable.. Standard 15mm, can be used with 15mm rod clamp, follow focus, matte box, and so on.. Weight only 37g Package includes 2 x carbon fiber rod. Please note that the carbon fiber rods do not feature female thread.

For 5 and 7 Monitor SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system. Dual Anti-Twist Design The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V V, and silicone pad to prevent the monitor from scratching and twisting. Quickly Tightened The mount can tilt 180 degree and and swivel 360 degree, different with the old mode using Allen Wrench, this upgrade monitor is quickly tightened via a knob to suit different angle. Multiple Threaded Holes Features locating screw for ARRI at the bottom to connect camera cage and 14-20 threaded holes for magic arm or stabilizer. 14-20 screw on the top support monitor, microphone, light, etc. High Quality Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capacity, 90 degree4.2kg, 45 degree2.5kg, 30 degree2.3kg.

Compatibility This kit includes a top handle 3765 and a monitor mount 2905B. The monitor mount 2905B is designed to support 5 and 7 camera monitors via cold shoe on top of camera cages or handles. The top handle with locating holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms. Tension Adjustable The monitor mount offers 180 tilt 360 swivel. Different with the old version using allen wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. The swivel tension is adjusted by provided allen wrench. Anti-Twist Design The camera monitor holder features bulid-in bouncy locating pins on the top to futher secure Ninja V V, and silicone pad to prevent the monitor from scratching and twisting. Multiple Mounting Points The top handle features 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. Additionally, it has an abundance of 14-20 and 38-16 mounting points for other accessories. An allen wrench helps tighten the locking screw, making it easy to assemble and disassemble. Note Different tilt angle has different load capcaity, 90 load capacity4.2kg 45 tilt load capacity2.5kg, 30 tilt load capacity2.3kg. For the safety, please do use the Allen Wrench to re-tighten the 14'' knurled screw for further security.

Compatibility This rotatable collar mount plate is designed for Canon R5 R5 C R6 R6 Mark II Camera to quickly switch between horizontal and vertical shooting without adjusting the lens optical axis. Quick Switch The lens collar mount plate can rotate by 90 degrees by merely unlocking a knob to switch between horizontal and vertical shooting The lens support plate compatible with plate for Arca-type, for Manfrotto RC2 tripod and for DJI RS-series gimbals, quickly switching on tripod, gimbal, monopod. Anti-Twist Design The collar mount plate lock the camera via 14 screw and locating pin, also built-in pads that prevent scratches and twisting.It maintains full access to the LCD flip screen, battery door, card slot and ports. Multiple Functional Holes The bottom built-in 14-20 and 38-16 threaded holes also support side handle,magic arm or other quick-release plates, QD mount, strap hole for wrist strap. Besides, a magnetic dual-head wrench for easy installation and release. Safe Lens Release No need to adjust the height of the lens ring mount plate when mounting different cameras. 1.Please remove the lens before installationremoval. 2.The product fit for Canon Mount Adapter EF-EOS R, for Canon Control Ring Mount Adapter EF-EOS R.

Only For Canon C80 The SmallRig Cage Kit 5136 features a customizable setup with detachable top plate, baseplate, and right side plate, allowing filmmakers to adapt to various shooting scenarios effortlessly.. Modular DesignThe modular baseplate design offers two configurations when using the mount plate, it can be mounted on tripods ID 4463, for ARRI BP8 baseplates ID 3357, and shoulder rigs ID 4181. Removing the the mount plate allows for direct mounting on for DJI RS 2, RS 3 Pro, and RS 4 Pro gimbals.. Multiple Mounting Points Built-in 14-20 and 38-16 threaded holes, 14-20 locating holes, for ARRI 38-16 locating holes, M3 threaded holes, cold shoe mounts, H21 NATO rails, and QD sockets for extensive accessory expansion.allowing for compatibility with side handles ID 3260, 4015, 4016, magic arms ID 5141, monitor mounts ID 2903B, 2905B, baseplates with dual rod clamps ID 3357, and follow focus rod clamps ID 3598.. Quick Switching The modular NATO rail, designed with the matching grooves to fit the original handle, can be mounted on top and sides of the cage for seamless horizontal and vertical shooting.. User-friendly design Includes lens adapter support is adjustable by 19mm 0.7 in to accommodate different lens adapters, reducing strain on the camera mount to prevent deformation or damage and an for HDMI cable clamp for stable data transmission. Compatible with original accessories This cage kit is compatible for Canons OEM microphone mounts, focus plane marks, and off-camera shoe cords OC-E4A.. Ergonomic Designan ergonomic top handle with built-in non-slip silicone for a comfortable grip. A magnetic Allen wrench is also included for easy assembly and disassembly..

TOP HANDLEThis SmallRig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.. MOUNTING POINTSThe SmallRig camera handle with abundance of 14'' and 38'' mounting points, can attach different gears on it for additional attachment options and DIY operations, such as monitor mount 2905, magic arm 2065, wireless remote control 2924, shotgun microphone 3468, led light 3286. COMPATIBLITYThis SmallRig camera handle grip can be attached to a camera cage directly with 2pcs 14 screws the adjustable space between two 14 inch screws is 30mm-40mm, Fits any cage with the standard 14- 20 thread on top, such as SmallRig cage 2087, cage 2168, cage 3667, cage 1661 and most cages of SmallRig.. EXQUISITE DESIGNThe versatile handle is made by aluminium alloy, this material is light, durable, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig.. SATISFACTION WARRANTYAll SmallRig camera rigs come with a YEAR warranty, any problem after purchasing please contact us, we will try our best to help you within 24 hours..

For DJI RS Series Gimbal- The adjustable monitor mount is specially designed for DJI RS 2 RSC 2 RS 3 RS 3 Pro RS 3 Mini RS 4 Mini Stabilizers. The mount is used for mounting monitors and photography accessories on the side of stabilizers, such as a LED light, sound receiver, wireless device, action camera, etc.. 360 Tilt Adjustment- It is suitable for approximately 5 inch monitors and allows for stepless 360 rotation with a secure locking knob. The 360-degree swivel capability ensures versatile angle adjustments to adapt to diverse shooting scenarios. Note Use a wrench to secure and prevent the monitor from loosening. Anti-Twist Design- The monitor mount build in locating pins on the top to further secure the monitor. Anti twist pins effectively prevent the holder from deflecting Please note the max payload is 1.5kg3.3 lb. . Multiple Expansion-The mount incorporates six 14-20 threaded holes and one cold shoe mount for attaching microphones, SmallRig magic arms 3873, LED video light 3286B, action camera, and other accessories. Except mount, the pacakge also includes NATO Rail x 1, M4 Screw x 2, Allen Wrench x 1.. Quick Release NATO Clamp- Featuring a NATO clamp, this mount is designed for DJI RS series stabilizers equipped with a NATO rail. For stabilizers without a NATO rail, please install the included NATO rail ID 4640 first..

Multifunctional Cheese PlateSmallRig camera plate 1598 is equipped with various threaded holes 14-20 thread 38-16 thread, with standard spacing 9mm center to center, allows to set up multiple configurations for your support system. It is a DIY gear for the attachment of various devices. Universal UsageThe baseplate comes with standard 14-20 and 38-16 thread, which could easily be attached via camera cage, plate, handles, tripod, such as for REDfor Sonyfor Canon camera, then connect rail blocks, dovetails and short rods, microphone, led light, receivers, etc.. High-Quality MaterialThis SmallRig cheese plate is made of aluminum alloy and stainless steel which is very well built and very long-lasting. It is a perfect study for people who love making videos.. High-Quality MaterialThis SmallRig cheese plate is made of aluminum alloy and stainless steel which is very well built and very long-lasting. It is a perfect study for people who love making videos.. Product InformationDimension 905010mm3.541.960.39 Net Weight 70g2.46oz Package Includes 1 x Baseplate, 2 x 14 Screw, 1 x Hex Spanner Materials Aluminum Alloy.

UNIVERSAL BASEPLATEA dedicated baseplate designed for mirrorless and DSLR cameras. HEIGHT-ADJUSTABLEThe baseplate is height-adjustable via the side wingnut to ensure different cameras sit on the baseplate complying with the LWS standard, allow you to attach Follow Focus, Matte Box, etc. FOR ARCA STANDARDFeatures a baseplate and a quick release plate for Arca standard on the top. Attach the QR plate to the camera or camera cage, and then drop it into the receiver, locked via the side knob screw. 15mm ROD CLAMPComes with a 15mm rail support system for accessories attachment. You can attach SMALLRIG 15mm Rod 1053 for a Lens Support 2152 or Shoulder Pad 2077. MOUNTING POINTSThere are multiple 14 and 38 threaded holes on the bottom of the baseplate for attaching different tripod plate.

Auxiliary Camera Movement The mini side handle is designed to assist camera movement, enhance the stability during handheld mobile shooting. Note The camera cage handle needs to be installed to two 14-20 threaded holes with a spacing of 18mm.. Small and Portable With dimensions of 102 x 80 x 46mm and a weight of only 116g, the camera handle is lightweight and portable, but it can bear a load of 5kg. NOTE If you preferneed a larger handle, please choose other SMALLRIG side handles, such as SMALLRIG 4015 and SMALLRIG 4017.. Interchangeable for Left and Right Hands The camera cage mini side handle adopts ergonomic design, which can be used interchangeably with left and right hands without re-disassembling the handle connector, providing a comfortable and convenient shooting experience.. Adjustable Up and Down The camera handle can be adjusted up and down by 30mm, and adjusted to the best grip position according to the size of the camera body. The bottom has a built-in magnetic hexagonal wrench for easy adjustment of the handle connector.. Multiple Mounting Points The camera cage handle has built-in a 14-20 threaded hole to attach accessories such as Monitor Support 2905B and Magic Arm 3875 A cold shoe is built-in to attach LED Video Light 3286B, Microphone 3468, etc., to meet the expansion needs of multiple scenes..

For GoPro Hero 13 12 11 10 9 Black The Cage 3084C is an all-in-one full cage which is compatible with microphones, LED lights, providing a perfect Vlog filming solution. It supports lens replacement, and it's compatible with the Max lens mod.. Cold Shoe Mounts The top and right sides are equipped with two cold shoe mounts that can be connected to accessories such as microphones and LED lights. Its hollow-carved cold shoe design does not block GPS signal.. Compatible with Original Baseplate The bottom contains a foldable mount for GoPro compatible with the original baseplate, and a 14 threaded hole can also be directly connected to a tripod BUT2664, magic arm 3873 3874 3959, crab-shaped clamp 3757B 4102B, suction cup mount 3565 4193.. Removable EVA Side Plate The side panel features magnetic EVA to be easily mounted or removed. You can keep the side plate in place without disassembling the original one for better protection of the camera.. Quick Release Button The side plate is locked by pressing the cover and released by pushing the button for battery switches and gives access to type-c port.. Notice Due to the special surface technology of GoPro Hero12 Black, 3084C may cause slight indentation on the camera body in order to ensure better installation, but it does not affect the use of the device..

Flexible ExpansionThe 15mm carbon fiber rods 12 5212 is designed to facilitate accessory expansion with included 15mm rod clamps. It can be connected to matte box, lens support, follow focus, and V-mount battery plate.. High PerformanceThe wall thickness has been reinforced to 2mm0.08 inches, boasting high strength that resists deformation and ensures structural integrity under heavy loads.. Distinctive StylingThe signature textured aircraft-inspired surface, complemented by red accent detailing, offers distinctive styling and professional aesthetics.. Length of 12''The carbon fiber rod measures 12 inches 30cm in length, accommodating most application requirements. If you need a shorter rod, SmallRig rods 5211 20cm, 8 inches will be recommended.. LightweightThe 15mm rod is made of carbon fiber, offering lightweight and portable performance with a mere weight of 88g3.1oz..

Transfer Weight Designed to remove the weight stress from the camera's lens mount when your camera is mounted on separately available 15mm LWS rods.. Quick Adjustable The lens support offers 53.5mm vertical adjustment to fit most lens. The height is adjustable via the quick release knob without using tools.. Security Design The center column attaches to a Y-support which features strap slots on each side for further security.. Lens Diameter Range The lens support is compatible with lens diameter up to 150mm.. Compatibility Support for 15mm LWS Rods.

With 14''-20 38''-16 threads on bottom, this15mm rod base plate can be attached to any tripod .. This tripod base plate is specifically designed to keep the weight down and let the operator use the inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig.. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.. This15mm baseplate with 15mm rod clamp, compatible with mirrorless camera and cinema camcorder, such as Sony A7 series, Sony FS7, Canon C100C300C500, Mini Blackmagic URSA etc.. Rubberized pads prevents the camera bottom from scratching ..

Cold Shoe Mount SmallRig cold shoe mount with hook and loop strap 5711 is designed to expand mounting options for wildlife photography and film-making. Combining an aluminum alloy cold shoe mount with a durable hook-and-loop strap. Wide Compatibility For DJI Mic Mini microphone, universal directional cold shoe microphone, medium and long-focus mirrorless lenses, cinema lenses, and action cameras, meeting the collaborative equipment needs of ecological shooting, outdoor vlogs, and professional impact teams. Quick Fixing, Flexibly Adapting to Various Scenes Equipped with hook and loop strap allows for even quicker fixation and removal, enabling fast attachment to long-focus lenses, tree trunks, and other surfaces to expand microphones and action cameras. It helps you achieve microphone placement away from machine noise interference and meets the quick setup needs of outdoor shooting. Lightweight and Portable This stylish cold shoe mount with hook and loop strap is made of aluminum alloy and nylon, weighing only 42g 1.5 oz. It is durable and fashionable, convenient for on-the-go use. The cold shoe mount features an anti-detachment design to prevent accidental falls. Note Do not use during high-intensity activities to prevent accidental detachment. Unlock Creative Shooting Angles Cold shoe mount with hook and loop strap enables you to achieve first-person perspective shooting with action cameras, as well as covert angle shooting, adding a unique perspective experience to documentaries and adventure videos. It is an ideal choice for quick access to creative shooting angles.

Quick Release Plate for Arca-Swiss This QR Plate 3913 is designed to solve the problem of unstable placement and difficult installation of camera. Supports for Arca-Swiss standard accessories, such as baseplate, fluid head, etc.. Foldable Quadruped Support It comes with four foldable standing legs that allow placing camera with a lens length of less than 5.9inch 15cm in most situation, and protect your camera and lens from scratching. Anti-Twist and Non-Slip Design This quick release mount for Arca-Swiss features a hex spanner for tightening screws and a threaded slot for mounting screws to lock camera and cage at the same time. The anti-slip pads, providing a stable placement. Lightweight and Easy-Carrying Only Weigh 0.26lb 119g but the playload up to 44.1lb 20kg. Compact pocket design is easy for carrying and storage. Note 1. Lens no longer than 5.9inch 15cm are recommended. 2. If necessary, please adjust the screws to adjust the center of gravity of camera relative to the quick release plate.

Strong Versatility The side handle can be adapted to two 14-20 threaded holes with a spacing of 18mm. It is designed to assist camera movement, enhance the stability of handheld mobile shooting, and provide mounting points. NOTE The maximum load is 15kg.. Ergonomic Design The side handgrip is designed according to the shape of the hand when held. The handle can be adjusted up and down by 36 mm 1.42 inches, allowing you to adjust to the best holding position according to the size of the camera, providing a comfortable shooting experience.. Sturdy and Durable The main body of the handle is made of high-strength aluminum alloy, the two 14-20 screws are made of stainless steel, and the palm contact surface is made of non-slip silicone, which is non-slip, anti-freeze and durable.. Left and Right Hands Available The aluminum handle can switch between left and right hand. If you want to use it on the other side of the cage, just remove the connecting part of the handle and change the direction. The built-in magnetic hex wrench at the bottom makes it easy to adjust the connecting part.. Multiple Mounting Options Built-in various accessories installation points, such as 14-20 locating hole, 14-20 threaded hole, wrist strap hole, cold shoe, etc., which can attach monitor mount 2905B, magic arm 3873, led video light 3286B, microphone 3468 and other accessories..

Innovative Design The X-R95 lens ring features a groundbreaking 14-circle crescent-shaped lens ring design, eliminating the cumbersome process of traditional L-plates for a more straightforward switch between horizontal and vertical shooting.. Unobstructed Vertical Shooting With a sleek 14-circle arc design, the vertical shooting experience is unobstructed, ensuring a smooth grip on the handle section without blocking any ports for a seamless shooting experience.. Wide Compatibility Compatible with a wide range of small-sized lenses, particularly those designed for mirrorless cameras, and most lenses with a recommended lens mount diameter of up to 84.8MM, ensuring broad applicability.. Anti-Slip Safety Equipped with anti-slip pins on both sides of the base, the X-R95 ensures camera safety, preventing accidental slips and providing reliable support for stable and secure shooting.. Lightweight and Portable Weighing in at only 0.22KG, the X-R95 is incredibly lightweight and portable, making it the ideal choice for outdoor photographers. Easy to carry, it enhances the convenience of your shooting experience..

ARCH-SHAPE SOLID CONSTRUCTIONThe integrated base plate is made of aluminum alloy, with smooth surface and strong oxygen resistance. Unique arch design with only 4.9 oz, lightens the camera rig. 15MM ROD RAIL SYSTEM Featuring 15mm diameter and 60mm standard center distance rod holes, the baseplate enables you to attach two 15mm rods for lens support, matte box or other accessories. 14 38 MOUNTING POINTS It provides multiple threaded holes on the bottom for camera, camera cage fixing onto the tripod, plate, etc.. ANTI-TWIST Built-in rubber pads on the top of base plate, increases friction and prevent the camera from scratch. ERGONOMIC RAIL CLAMP Comes with dual wingnuts, which allows 360 degree rotation and clamp the 15mm rails stably.

Adjustable vertical height 60mm support bracket with two rubber washers to protect the finish off of your lens from wearing. The diameter range of the lens works from 50mm to 140mm.. The Y shaped long lens support screws onto the 15mm rod clamp to the long telephone lens while shooting. Perfect for long lens and compatible with any industry-standard 15mm rod system, help to create a more stable, vibration-free platform for shooting.. The spacing between the 15mm holes fits standard pieces of equipment.There are thumb screw and wingnut on both of the holes, you can tighten this on both rails.. There are 14 and 38 thread placements which are versatile. Mount a Monitor or teleprompter on your cinema rig when it's on a tripodslider.. Made of black anodized aluminum, light but durability for long life operation..

Universal Compatibility SmallRig Monitor Mount 3809 features a highly compatible cold shoe on the bottom, which fits camera hot shoe or shoe mount on camera rigs such as camera cages or handles. The 14-20 screw features detachable locating pins on the top can attach a field monitor, LED light or other accessories. 360 Swivel 180 Tilt This camera monitor holder could swivel 360 and tilt 180, and keep your monitor or LED light in any fixed position without using tools. Max Load Capacity 90 tilt load capacity is 3.2kg, 45 tilt load capacity is 2.5kg, and 30 tilt load capacity is 2.3kg. Its tightness is adjustable on each axis. Secure Locking The large thumbscrew head makes installation easily and also features locking holes for an Allen wrench to further tighten it. The protective rubber pad on the top provides more friction to prevent deflection. What's Included 1 x Monitor Mount, 2 x Allen Wrench. The 14-20 threaded hole at the bottom enables it to use with Magic Arm such as SmallRig 2070 and Ball Head 2948, etc. Note Please do use the Allen wrench to re-tighten the thumbscrew for further security Please install the monitor before adjusting its angle.

This Lens support system is perfect for long lenses and is compatible with any industry-standard 15mm rod system, help to create a more stable, vibration-free platform for shooting.. The Y shaped long lens support screws onto the 15mm rod clamp to the long telephone lens while shooting.. There are two rubber washers to protect the finish off of your lens from wearing. GlooveSlot design, allow to use Velcro to fasten your big lens.. Wildely compatible with different lens. The diameter range of lens support 50mm to 140mm Adjustable in height.. NOTE Dual Rod Clamps Please Search SmallRig 1761 OR SmallRig 1783 OR SmallRig 1784..

FOR BALANCING CAMERA ON GIMBALSMALLRIG counterweight 200g is designed to balance your camera on Gimbal Stabilizers by adjusting the quantity and position. STACKABLE VIA 14-20 SCREW AND HOLEDesigned for easy stacking, this counterweight features a 14-20 screw on one side and a 14-20 threaded hole on the other to add more counterweights if necessary. SURFACE INCREASE FRICTION DESIGNFor easy installation and detachment, the unsmooth surface features lines to increase friction. MADE OF STAINLESS STEELSMALLRIG AAW2285 is made of stainless steel, corrosion resistance. Optional SMALLRIG 100g Counterweight AAW2284 and 50g Counterweight AAW2459 are provided if needed. MOUNTING PLATE SOLD SEPARATELYIt is compatible with SMALLRIG counterweight mounting platessold separatelyvia a separately available mounting plate, such as Ronin-SC Counterweight Plate BSS2420, Ronin-S Counterweight Plate BSS2308 and other counterweight plates for Zhiyun gimbals.

Classic Universal BaseplateSmallRig Baseplate with Dual 15mm Rod Clamp 1674 is a simple and light base plate for the currently popular cameras and camera cages, such as for Sony A6500A6300A6600, for Sony A7SIIIA7RV ZVE-10, for Canon R5 R6, for Fujifilm XT-5, etc. The baseplate assists the camera to switch quickly between the tripod, shoulder, and other shooting modes.. 15mm LWS Rod SupportThe base plate features 15mm diameter and 60mm spaced rod holes that allow you to mount a follow focus, matte box, lens support, or other accessories. The plate is contoured to fit with shoulder pads while also remaining lightweight.. Scientific Thread ArrangementWith 14''-20 38''-16 threads on the bottom, this base plate can be attached to quick release plate and then be attached on any tripod such as SmallRig FreeBlazer Carbon Fiber Tripod 3989 not included.. Easily Attachment on CamerasCagesThe base plate comes with 14 and 38 screws and can be used on the camera cages, or directly on cameras. This solid baseplate features rubber padding on top of the plate to prevent twisting and scratching.. Comes with 15mm Lens Support Add support for longer lenses with this 15mm LWS Universal Lens Support with 1.4 Vertical Adjustment, which is compatible with 15mm LWS rod systems. The Y-shaped lens support helps carry the weight of lenses with a diameter up to 150mm.. What's in the BoxBaseplate x 1, 14 Fixing Screw x 1, 38 Fixing Screw x 1, 14-20 Threaded Screw x 2, Allen Wrench x 1, Lens Support x 1.

Elongated Handle Adapter SmallRig Mini Side Handle 4756 adopts a handle adapter extended design, which can balance the forward tilt of the camera device's center of gravity, relieve wrist burden, and facilitate the use of a side flip screen for monitoring and side cables. Ergonomic Design Crafted with ergonomic precision, the handle boasts a skin-friendly, anti-slip silicone coating, allowing seamless interchangeability between left and right sides for a comfortable shooting experience. Highly Adjustable SmallRig 4756 with a vertical adjustment range of 43mm 1.7in, it enables optimal grip positioning based on the camera size. Additionally, it is equipped with a magnetic Allen wrench facilitates easy adjustment of the handle adapter. Wide Compatibility SmallRig Mini Side Handle with 14 -20 Screws 4756 compatible with two 14-20 threaded holes spaced 18mm 0.7in apart, making it highly versatile. At the same time, the maximum load-bearing capacity of the handle is up to 6kg 13.2lb. Mounting Options The handle features 14-20 threaded holes and a cold shoe interface, meeting the needs of multi scene expansion. It can be expanded with accessories such as SmallRig power bank clamps ID 2790, magic arms ID 2070B, monitor mounts ID 2905B, LED lights ID 3286B, microphones ID 3468 to enhance your shooting experience.

Wide ApplicationA universal double ball head with cold shoe and 14 screw on both ends, and can be widely used with a monitorsmall action cameraLED Lightsmicrophonesflash when shooting. 180 Degree RotationThe ball mount can be easily rotated by 180 degrees and secured by the side wingnut for a perfect viewing angle. Easy to Lockthe locking knob is used for securing and operating the ball head faster. Comes with Shoe BaseThe ballhead comes with a shoe base, which could mount on a camera cagehandleplate, or directly on cameras such as or Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm for Kodak.. NOTICEnot recommend for monitor or LED light over 1.0 kg2.2 lbs..

Quick Release for Arca The quick release clamp 2144B includes a clamp and a plate for Arca-type. Tightness of the clamp can be adjusted by stirring the tiny screw on the lever, so it is also cross-compatible with most plates for Arca type.. Multiple Compatibility The plate is attached to the bottom of cameras or cages by screws. The clamp features multiple 14''-20, 38''-16 threaded holes and thorough mounting holes on the bottom, so you can mount it on tripods, jibs and other devices.. Aluminum Alloy The quick release mount plate kit is made of aluminum alloy, which increase strength and sturdiness.. Compact Portable This clamp's dimension is 72 x 58 x 14 mm, the plate's dimension is 68 x 38 x 8 mm. Both are lightweight and compact, making it easy to carry and use.. Package Include The mount plate kit includes quick release plate x1, clamp x1, 14''-20 screws x4, allen wrench x2.

Aluminum Alloy Material SmallRig live desktop camera bracket is suitable for indoor live streaming, desktop photography, video conferences, and other scenarios that require overhead shooting. The C-clamp and articulated arm of the desk mount stand are made of aluminum alloy, making it rust-resistant, reliable, and light to carry. This bracket is suitable for desktops with a thickness of less than 67mm. Note Please pay attention to the size information to avoid purchasing errors.. Multi-Angle Shooting The adjustable bracket supports 360 rotation, allowing you to find the perfect angle for your live broadcasts or recordings. The 3-section detachable articulated arm provides flexibility and customization options, making it easy to carry and assemble according to your needs.. Strong Load-Bearing Capacity With a tilt load-bearing capacity of 2.7kg5.9lbs and a horizontal capacity of 3.3kg7.3lbs, this bracket can securely hold your camera equipment in place. NoteBall Head Load Capacity 1kg 2.2lbs.. Additional Device Support The desktop camera mount comes with an aluminum alloy crab-shaped clamp and holding arm, enabling you to attach additional devices for efficient shooting.. Highly Compatible Featuring a 14-20 screw, phone clip, lamp holder, 14-20 to 38-16 adapter, and 14-20 to 58-11 adapter, this overhead camera desk mount is compatible with various devices such as SLR cameras, ring lights, microphones, and mobile phones.. Package includes C-Clamp x 1, Articulated Arm x 3, Crab-Shaped Clamp x 1, Holding Arm x 1, Phone Clip x 1, Lamp Holder x 1, 14-20 to 38-16 Adapter x 1, 14-20 to 58-11 Adapter x 1, User Manual x 1..

Two in One Table Mount The extendable desk mount is equipped with one 14 ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work.. Height Adjustable The desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 13-33 35.4cm-90cm, which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier. The bracket is suitable for desktops with a thickness of less than 5cm1.96. Note Please pay attention to the size information to avoid purchasing errors.. 360 Swivel Ballhead The ballhead with top 14 screw ensures 360 panoramic rotation for panoramic shooting, -9045 front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The load capacity is 3-10KG. Note In order to enhance the stability of the bracket, the base of the bracket is an integrated design and cannot be disassembled.. With Extension Arm The total length of the aluminum alloy extension arm is 355mm, and the load-bearing capacity can reach 2KG. The extension arm is equipped with an 18mm ball head, and the top 14 screw can be connected to fill lights, microphones, smartphones, etc.. Tough Reliable Made of aviation aluminum alloy material, with the strong tube diameter 22-25mm, it is more reliable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint..

Remove Weight SmallRig BSL2680 is designed to remove the weight stress from the camera's lens mount when your camera is mounted on separately available 15mm LWS rods.. 34.5mm Vertical Adjustment The lens support offers 34.5mm vertical adjustment to fit most lens.. Quick Release Knob The height is adjustable via the quick release knob without using tools.. Y-Bracket for LensThe center column attaches to a Y-support which features strap slots on each side for further security.. Compatibility Support for 15mm LWS Rods.The lens support is compatible with lens diameter up to 150mm..

Compatibility SmallRig 2727 is universal 15mm LWS rod mount lens support which is designed to provide lens support and protect the mount for the lens.. Adjustable Vertical Height Use the thumbscrew to adjust the vertical height.. External Diameter 73-108mm The support protects the lens with an external diameter of 73-108mm.. V-shaped Bracket The V-shaped bracket has a built-in pulley, and the usable position is not limited by the position of the zoom ring or the focus ring.. Easy to Use It provides stable support simple installation, which makes users feel comfortable..

ONLY FOR MATTE BOX 3196SmallRig Lens Adapter Rings Kit 5255586286-95 3383 is an optional accessory that works with Mini Matte Box 3196. It helps connect your camera and filters to the matte box via the threads.. FOR ATTACHMENT OF FILTERSVariable ND filters and CPL filters of up to 92.5mm can be screwed on this lens adapter firmly ring through the threads on them.. FOR VARIOUS LENSESThis filter adapter rings set 3383 is fully compatible with various lenses, providing an excellent shooting experience for users in terms of quick installation and scene switching.. WELL-MADE MATERIALThis lens adapter rings is constructed of a sturdy and premium aluminum alloy with strong oxygen resistance and quality.. SMALLRIG WARRANTY SERVICEFriendly 24-hour customer support, 30-day no-hassle return service, worry-free 2-year warranty..

koolehaoda Quick release plate for monitors and magic arm articulating arm with security locking system to quickly lock the quick release plate.. Well built in aluminum stainless steel durable and sturdy .Precisely engineered, black anodized, sealing it against corrosion and abrasion.. Features with 2 pieces of 14-20 screw, allow you attach magic arm, HDMI splitter, LED light, flash, LCD monitor to your rig in a fast way.. One plate mounted to the monitors, and the other one plate can be mounted to magic arm, tripod, camera lens that with 14 in screw socket. With red locking knob, the mechanism will lock the both side very tightly..

LengthLength of 4 inches 10cm. DiameterThe diameter of the rods is industrial 15mm standard. Inner ThreadM12 inner thread on each end of a rod, so that you can use M12 rod end cap SmallRig 1617 to prevent your accessories sliding from rods. CompatibilityMainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc.. High QualityMade of 6061 aluminum alloy, well finished and precise CNC processing, sturdy and durable.

STABLE LIGHTWEIGHTSMALLRIG Universal LWS Baseplate with Dual 15mm Rod Clamp fits mainstream DSLR and mirrorless camera cages on the market. The baseplate is locked via the screws and attach to the camera via the 14 or 38 screws.. 15MM ROD CLAMPIt works with dual 15mm rods to attach such as accessories lens support, follow focus, and matte box during handheld shooting and tripod shooting.. SUPPORT TRIPOD SHOOTINGFeatures multiple threaded holes at the bottom, which can be attachmented with various sizes of quick release plates for tripod shooting.. RUBBER CUSHIONSThere built-in on the surface to prevent your camera from scratching and twisting.. WORK WITH CAGE 3270This base plate can ensure 85mm optical height when used with 3270 Cage for BMPCC 6K PRO. The specially-designed bottom allow the 3270 cage replace the SSD without removing the baseplate..

UNIVERSALITYSMALLRIG Lens Support 2727 is designed to provide lens support and protect the mount for the lens. This lens support is suitable for lenses with weight within 2kg.. FITS STANDARD 15MM LWS RODSSmallRig 2727 is compatible with 15mm LWS rod systems, which adds support for your longer lenses.. VERTICAL ADJUSTMENT RANGEYou can adjust the vertical height within a 2.1 30.5mm range via a quick release thumbscrew. Please note Before using, loosen thumbscrew first.. FITS UP TO 4.25 LENS DIAMETERThe support protects the lens with an external diameter of 73-108mm.. BUILT-IN PULLEYThe V-shaped bracket has a built-in pulley, and the usable position is not limited by the position of the zoom ring or the focus ring. It provides stable support simple installation, which makes users feel comfortable..

ADJUST ALL ANGLES Features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. It supports rotation of any angles. LOCK TIGHT Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Neednt worry about dropping. NOTICE Not recommend for monitor or LED light over 1.0 kg. 14 SCREWSEquipped with 14 screws at both ends. It could attach camera cage, top plate and Top Handle 19551984 on the one end, while attach monitor or video light on the other end. SMALLER MODEL This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163. If you need a bigger one, please check the SMALLRIG 2163.

Sturdier Upgrade The clamp has been enhanced with non-slip threads and an anti-twist structure based on the classic design of the crab super clamp, supporting up to 1.5kg without loosening. Allows you to focus on content creation. Wide Compatibility The clamp Multi-Function dual ball head comes with clamps and 14-20 screw to mount cameras, webcams, monitors, lights, microphones, action cameras, or any gear. Then, lock the clamps to the rodtubetableframetripod with the locking knob no drilling required. More Accessories We have added an adapter mount for GoPro, suitable for more photographers and video producers. Whether you are shooting in a car or fixing your camera on a desktop, these essential accessories are perfect for the video era. Your Premium Choice Crafted from aluminum and stainless steel, this super clamp endures years of testing. A product with a decade of sales history, chosen by approximately 300,000 users. We ensure satisfying after-sales service for your peace of mind. What You Get 2 x mini clamp kit Please note When using in dynamic scenarios, ensure to attach the safety rope to prevent any accidental device drops.

Portable Aesthetic Design Compact and lightweight 39.5g 1.4oz, this ring light mimics a powder box size 92x92x13mm, ensuring effortless portability. Its integrated sandblasted aluminum alloy and ABSPC construction combines durability with a sleek, modern aesthetic. Universal 67mm Threaded Compatibility Effortlessly attach to 67mm threaded phone mounts, cases, cages, or macro lenses e.g., SmallRig 517251735174 adapters. Attach to smartphone or camera lenses within seconds, enabling versatile shooting setupsfrom macro photography to live streaming. Bi-Color Lighting with Pro-Grade Control Adjust brightness 3366100 and color temperature 3200K warm yellow to 5600K cool white via intuitive controls. The high CRI 90 ensures accurate color reproduction, ideal for skin tone enhancement and vivid content creation. Soft Ring Light for Flawless Effects The 3W bi-color LED ring evenly illuminates subjects, eliminating facial shadows while adding depth to eye highlights. Perfect for selfies, tabletop photography, and videos. It delivers a natural beautifying effect for skin and eyes. Quick-Charging Long-Lasting Power Equipped with a 440mAh battery, enjoy 30 minutes of runtime at full power. Recharge swiftly via USB-C 5V1A and stay focused on capturing stunning vlogs, short videos, or live streams without interruptions. Note Package includes a SmallRig vibe P30 67mm threaded ring fill light, a Type-C charging cable. Not included 67mm thread adapter for smartphones sold separately.

HIGH CUSTOMIZATIONThe Wooden Grip is designed for Sony RX100 IIIIVVVAVIVII LCS2467 to provide comfortable grip and accessory mounts for RX100 series users. The Bracket comes with a wood handgrip for better shooting experience for vloggers youtubers filmmakers without block battery buttons. PERFECT PROTECTIONThe grip secures to the bottom of the camera via a 14 screw and features anti-twist flanges to prevent twisting. And Battery door is accessible with this grip attached. Also, it allows flipping the LCD screen and accesses all ports and buttons on the camera. ERGONOMIC HANDLEWooden grip on the right side adds the size of the camera grip which provides a better hand-held shooting experience. It is designed to increase the space between wooden grip and lens to ensure comfortable when holding. THREAD AT BOTTOMFeaturing four 14-20 accessory threads on the bottom so that you can attach a tripod or tripod plate to one of the threads without obstructing the battery door. SWEET DESIGN the bottom of the L-shaped handle comes with a slot for a carry strap. With the lightweight and compact features, it keeps the pocketable design of the camera. Related ProductIf you would like to control your camera by remote, you could search SmallRig SR-RG1 Remote Shooting Grip 3326.

Ergonomic Design- Includes both a shoulder pad and a back pad. The shoulder and back pads utilize soft cushioning for a snug fit and enhanced comfort, effectively reducing strain during extended shooting sessions.. Comfortable Back pad- The back pad is crafted to prevent the rig from slipping forward and allows for back-and-forth adjustment to accommodate different body sizes. Furthermore, it can be repositioned as a chest pad when mounted upright, enhancing stability and reducing strain during handheld shooting.. Efficient Assembly- The shoulder pad can be quickly and securely attached to dual 15mm rods by using one knob, providing superior stability and quick disassembly as well.. Highly Expandable- Built-in 14''-20 holes, it can connect for attaching weights, V-mount batteries and other accessories. It features a modular design that supports additional SmallRig 15mm rods 1054, handle kit 2002F, baseplate 2092B, mini follow focus 3010C, battery baseplate 3018B, and battery 4469 for integrated professional use.. Reliable Materials- The shoulder mount rig is made from aluminum alloy and stainless steel, featuring lightweight and sturdy. The shoulder and back pad are made from PU and silicone for reliable comfort..

Dual-Rod Expansion Capability The SmallRig Mount Plate Kit 5365 is designed to facilitate users to expand accessories with 15mm rod clamps. The mounting base can quickly lock the 15mm rods through a one-lock-two design, allowing for the attachment of lens supports, follow focuses, matte boxes, V-mount battery plates, and other accessories. Integrated Quick-Release Plate for Arca-Swiss The mounting base features a built-in quick-release plate for Arca-Swiss on the top, allowing for seamless and rapid assembly and disassembly. Adjustable Buckle The locking mechanism employs a buckle design for easy and quick locking and unlocking. The locking buckle is adjustable and compatible with most available quick release plates for Arca-Swiss on the market. Multiple Mounting Points The mounting base is equipped with 14-20 and 38-16 threaded holes at the bottom, allowing for the use of quick release plates for Manfrotto with two screws for secure and stable mounting without wobbling. In the Box Mount Plate Kit x 1.

EXCELLENT SUPPORT - The Y-shaped lens support is designed to provide lens support and protect the mount for the lens,the universal lens support work perfect for taking the strain off the lens mount,this lens support is suitable for lenses with weight within 2kg. FITS STANDARD 15MM LWS RODS- The Lens Support is compatible with 15mm LWS rod systems,easy to add to most shoulder rigs,and easy to remove,locking knobs offer reassurance of security. HEIGHT ADJUSTABLE-The adjustable wingnuts allow you to easily and rapidly modify the height,it can help maintain a stable clear shot. BUILT-IN PULLEYThe Y-shaped bracket has a built-in pulley, and the usable position is not limited by the position of the zoom ring or the focus ring. It provides stable support simple installation, which makes users feel comfortable. HIGH QUALITY MATERIALS- Made of aluminum alloy material,CNC precision machining,lightweight and durable,capable of bearing higher pressure.

Good StabilityThe y shaped lens bracket improves balance and adds stability to your camera and lens for s camera stabilizer. This bracket's advanced design provides rock solid support, eliminating camera wobble and ensuring steady footage in any situation.. Good LoadingThis lens support frame can support a height of 2271.5 mm, with a load weight of 5 kg, practical and Be confident that your equipment remains securely and reliably supported throughout your shoot. This two wheeled long lens support bracket is ideal for lens bracket support systems, can bring good use experience.. AdjustableThis lens fixed bracket comes with a 14in slide screw that allows easy adjustment of the knots and can be adjusted to fit as needed. Achieve the balance and alignment for your camera and lens setup, allowing you to focus on capturing stunning footage without any distractions.. Applicable For s and for sc lens support system, stabilizer and quick release plate telephoto lens fixing. And its ergonomic design guarantees a comfortable grip and allows for easy adjustments, ensuring a customized fit for your specific needs, enjoy a fit and unlock the full potential of your equipment.. Order Now, Worry Customer satisfaction is our top priority. We're so confident about our product quality that we can provide a 1 year We will give you a professional and detailed reply within 24 hours. Click to buy now.

Choice Experience the optimal lens support system with our dual wheel Y shaped bracket. Embrace a seamless and satisfying user experience, making this bracket the choice for photographers and videographers alike.. Adjustability Equipped with a 14-inch sliding screw, our lens support bracket offers effortless adjustment of focal points. Fine-tune with ease and adapt to changing shooting conditions on the fly, ensuring control over your camera and lens setup.. Stability Redefined Enhance the balance of your S camera stabilizer and enjoy exceptional stability for your camera and lens. This bracket's advanced design provides rock solid support, eliminating camera wobble and ensuring steady footage in any situation.. Impressive Load Capacity With a height range of 22-71.5mm and a remarkable weight bearing capacity of 5kg, this lens support bracket is built to handle even the heaviest of setups. Be confident that your equipment remains securely and reliably supported throughout your shoot.. Wide Compatibility Specifically designed for S and SC lens support systems, stabilizers, and quick release plates for long-focus lenses, this bracket seamlessly integrates into your existing gear. Enjoy a fit and unlock the full potential of your equipment..

long lens support height adjustable. Material Aluminum. Color Black body Black knob. Net Weight 125.6g.

Classic Universal BaseplateSmallRig Baseplate with Dual 15mm Rod Clamp is a simple and light base plate for the currently popular cameras and camera cages, such as for Sony A6500A6300A6600, for Sony A7SIIIA7RV ZVE-10, for Canon R5 R6, for Fujifilm XT-5, etc. The baseplate assists the camera to switch quickly between the tripod, shoulder, and other shooting modes.. 15mm LWS Rod SupportThe base plate features 15mm diameter and 60mm spaced rod holes that allow you to mount a follow focus, matte box, lens support, or other accessories. The plate is contoured to fit with shoulder pads while also remaining lightweight.. Scientific Thread ArrangementWith 14''-20 38''-16 threads on the bottom, this base plate can be attached to quick release plate and then be attached on tripod such as SmallRig FreeBlazer Carbon Fiber Tripod 3989 not included.. Easily Attachment on CamerasCagesThe base plate comes with 14 and 38 screws and can be used on the camera cages, or directly on cameras. This solid baseplate features rubber padding on top of the plate to prevent twisting and scratching.. Carbon Fiber RodThe15mm carbon fiber rods20cm are lightweight and sturdy, compatible with follow focus 5163 and 4757, and wireless receiver motor 4297, meeting diverse requirements in complex shooting environments. Please note that the carbon fiber rods do not feature female thread.. Package IncludeYou can get 15mm carbon fiber rod 20cm x 2, base plate x 1, 14-20 screw x 3, 38-16 screw x 1, allen wrench x 1.

VERSATILITYSmallRig 2732 comes with a super clamp with 14 and 38 threads and an articulating arm with 14 screws on both ends respectively. The length of the camera mount is 9.8 inches25 cm.. SUPER CLAMPThis super cool camera clamp was made of lightweight aluminum alloy, comes with 14-20 and 38-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm. 360ROTATIONDouble 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 14 thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. RUBBER CUSHIONBoth the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter. WHAT YOU CAN GETMade of aluminum alloy and stainless steel, sturdy and durable. Package includes a Super Clamp and a Articulating Magic Arm. You can use the clamp arm on camera, tripod, monitor, microphone, action camera such as for Insta360 for DJI and so on.. PLEASE NOTE1.This product is not magnetic and will not stick to magnetic surfaces. 2.This product is not corrosion-resistant and cannot be used in seawater..

Instant Switch Seamlessly transition between daily use and professional setups with the FilMov Phone Case Kit 5549, designed exclusively for iPhone 17 Pro. Integrate effortlessly with the SmallRig phone cage without removing the case. Interchangeable Optical Accessories The lens backplate features a quick-release design, allowing for easy installation and removal of T-mount lens accessories. It includes a standard lens decorative frame and supports the optional FilMov 67mm Attachable Filter Adapter 5547 for magnetic filter applications. This setup is compatible with most phone gimbal stabilizer, including for DJI, for Insta360, and for Hohem. Note Separate filter adapters and filters must be purchased, and the lens cannot be used simultaneously with the gimbal. Ultra-Strong Magnetic Attraction Built with N52 magnets, this case is compatible with various chargers for MagSafe , wireless power banks, wallets, and stands without affecting signal quality. It also features a lanyard hole for easy attachment of lanyards or wrist straps, enhancing portability. Built-in Multi-Angle Kickstand The versatile kickstand adjusts from 30 to 110, enabling hands-free viewing for videos, video calls, presentations, or filming. The kickstand will automatically retract when positioned below 30. Military-Grade Protection Constructed with a combination of TPU for shock absorption and flexibility, and PC for superior hardness, this case provides robust defense against drops and scratches. Precision cutouts ensure easy access to all buttons, ports, and features without needing to remove the case. Usage Notes After installing the lens backplate, avoid placing the case with the camera control buttons facing downward, as heavy lenses may cause the backplate to detach. Additionally, refrain from exposing the phone to intense impacts or shaking when using external lenses to ensure optimal performance and safety.

Perfect Fit for DJI Osmo Action 6SmallRig street photography grip kit 6037 is specifically designed for DJI Osmo Action 6 street photography. The handlecage combo instantly transforms into a DSLR-like stable grip. Simple and Fast InstallationThe handle and cage are connected by screws and reinforced with a built-in magnetic wrench to achieve stable locking. A shutter trigger button easily mounts onto the handle via a cold shoe, allowing for quick setup and instant shooting readiness. Full ProtectionThe cage can be used alone or with a handle, suitable for various shooting scenarios. Aluminum alloy cage, with both shock absorption and anti drop performance. The wrist strap provides added safety during street photography, preventing accidental drops. Versatile ExtensionThe handle's base is equipped with a 14-20 anti-twist locating hole for quick mounting to tripods or extension poles, a cold shoe interface is reserved at the top of the handle, which can be connected to accessories such as fill lights and mics. Professional Grip ExperienceErgonomic thumb notch design provides precise force support and reduces fatigue from prolonged grip. Soft rubber texture provides an all-weather anti slip shooting experience. Complete Ready-to-Film KitIncludes Street Photography Cage 1, Side Handle x 1, Silicone Lens Cover x 1, Cold Shoe Shutter Adapter 1, Wrist Strap x 1. Mount and start filming immediately.

LIGHTWEIGHT CHEST PADSmallRig MD3183 is designed for reducing the sense of the weight of long-term handheld shooting, in order to make the shooting process more labor-saving and stable. If you operate your camera in the center front of your body when in handheld mode, you could add this Lightweight Chest Pad 3183 to your 15mm LWS rig for a comfortable stabilizing option.. MOUNTS ONTO SEPARATE 15MM LWS RODSThe pad mount features a 15mm LWS rod clamp that can mount onto any standard, separately available 15mm rods, and it can slide back and forth for adjustment along the rods. You can connect the camera through SmallRig 15mm rods such as 851 and SmallRig universal baseplate 1674, support it on the abdomen or chest for shooting.. ROTATE UP TO 150The rotating structure can be adjusted by 150, and the damping feeling can be adjusted by the included Allen wrench.. SOFT PADThe chest pad MD3183 is made from durable aluminum and a soft foam rubber pad that presses against your chest for stability and provides a more comfortable experience for long-term shooting.. ONE KNOB FOR ADJUSTMENTAn Allen wrench is included to adjust the tension, and a single locking knob allows you to quickly secure or remove the pad from your rig..

Fast and Easy to Use SmallRig 4117 is a quick set-up tripod specially designed for stabilizers, but it is also the perfect lightweight solution for supporting your cameras, camera cages or gimbals.. Slide Up Design Features patented technology, you can install this mini tripod at the bottom of your accessories and slide the top up to set up the support feet.. Wide Compatibility It is compatible with any devices with a 14-20 threaded hole at the bottom. The 14-20 screw on top of the tripod can be mounted to the bottom of the camera, cage, stabilizers, etc.. Ergonomic Anti-pinching Design The ergonomic design provides comfortable handling. This allows you to operate comfortably for longer periods of time.. Silicone Anti-slip Pads Silicone anti-slip pads of the support feet ensure a comfortable grip, which protects the equipment from scratches..

15mm Dual Rod ClampEnables quick mounting of dual 15mm rods for expanding professional setups with follow focus systems, matte boxes, V-mount battery plates, and other accessories. Quick Release DesignThe top features an adjustable quick release clamp with an innovative locking mechanism, fully compatible with most series quick release plates for Manfrotto-Type 501.. For Manfrotto-TypeThe kit includes a quick release plate for Manfrotto 501. The base is also compatible with dovetail plates for ARRI styleID 3770 for rapid mounting dismounting and center of gravity adjustment when used in combination.. Mounting PointsThe base of the mount plate is equipped with both 14-20 and 38-16 threaded holes, allowing for dual-screw locking with plates for Manfrotto to ensure a secure, wobble-free setup. Package IncludesMount Plate Kit x 1Double Head Wrench x 1..

Quick Release for Arca The quick release plate 2146B is for Arca swiss standard, compatible with most cameras and cages for Arca type.. Universal Compatibility The mount plate for Arca Type features 14''-20 and 38''-16 screw, saving time when mounting or detaching your DSLR or mirrorless camera from its rig or cage with this Quick Release Plate for Arca-Type from SmallRig. Recommended Accessories The plate can be used with the quick release clamp 2143B, which can be easily mounted on tripods, jibs and other devices for quick assembly.. Aluminum Alloy The quick release baseplate for Arca swiss standard is made of aluminum alloy, which increase strength and sturdiness.. Compact Portable This plate's dimension is 68 x 38 x 8 mm and is lightweight and compact, making it easy to carry and use..

Stable Triangular Structure - The first desktop camera stand featuring a triangular stable support structure. The horizontal and vertical rods are reinforced by an auxiliary support rod to form a stable triangular structure to improve shooting stability. The load-bearing capacity of up to 3kg provides higher stability.. Compatible Devices - The small ball head has a 14-20 screw and can be used with cameras, action cameras, webcams, and other devices for multi-angle shooting. Also includes a phone holder, making it compatible with your cell phone.. Fits up to 7cm Thick Desk - The C-clip can be clamped on a desktop up to 7cm thick and is suitable for most tables. Suitable for live broadcasts, Vlog short video shooting, product unboxing, beauty, food, selfies, and other scenes.. Adjustable Angle - The horizontal rod has 2 adjustable sections, with a length of 42cm-68.5cm. And the auxiliary support rod is locked via 2 non-fixed locking knobs, more flexible shooting angle selection, and no blind spots for indoor desktop shooting.. Multi-joint Locking - Multiple wider and thicker locking knobs for easier locking and greater stability..

Lens ProtectionNitze N04B lens support is made of anodized aluminum alloy for high durability. The wheels on the Y-shaped bracket can prevent the lens from scratching without affecting the rotation of the zoom ring or focus ring.. High CompatibilityAvailable lens diameter is up to 147mm. Vertical and horizontal adjustment is 33mm and 4mm respectively.. Snap-on DesignThe snap-on design supports the mounting or removal of the lens holder to a 15mm rod without removing attachments from other rods.. Y-BracketUniversal Y shape bracket is compatible with the lenses without support foot or tripod collar.. For Different LensesThe lens support includes a 14-20 cap, a 3816 cap, a M3 cap and a 14-20 height extension post for attaching lenses feature different threaded holes..

FOR SMALLRIG MATTE BOX 2660SmallRig 15mm LWS Rod Support for Matte Box 2663 is designed to mount SmallRig Matter Box 2660 onto the 15mm LWS rod system via 14-20 screw.. HALF-OPEN ROD CLAMPS FOR QUICK RELEASEThe rod support 2663 features an open-end rod port on one end. The half-open rod clamp allows you to mount to the 15mm LWS rod system directly without disassembling other accessories for saving the time. With this flexible design, it can be clamped on and off by quick release without having to remove any gear from your rig.. VERTICAL AND HORIZONTAL ADJUSTMENTThe rod support can be adjusted 30mm vertically and 6mm horizontally to fit different lenses. It is adjustable vertically and horizontally to support different lenses.. ALUMINUM CONSTRUCTIONMade of aluminum alloy, this rod clamp secures to the bottom of the matte box 2660 via an integrated 14-20 screw.. RELATED ACCESSORIESSmallRig Matte Box 2660, SmallRig 95 to 114mm Threaded Adapter Ring for Matte Box 2661.

COMPATIBLESmallRig Lens Adapter Support 2769?provides support for Metabones Viltrox lens adapter and a Blackmagic Design Pocket Cinema Camera 4K cage 2766.. CONNECTINGIt screws into the cage with two included M4 screws, and the lens support attaches to the lens adapter with the included 14-20 screw. It can relieve pressure for the lens adapter when using heavy lenses.. WELL-MADE MATERIALIt features a brand-new appearance of a dark olive finish. Weighs only 19g, it is made of aluminum alloy, with a matte surface and strong oxygen resistance.. NOTEThe SmallRig adapter support 2769 is NOT compatible with BMPCC 6K. And this adapter support can be used both upright and upside-down, please attach it accordingly.. SMALLRIG WARRANTY SERVICEFriendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty..

The mount bracket is compatible with SmallRig BMPCC 4K cage 220322542255 and Metabones adapter. You must have a metabones adapter and a SmallRig camra cage if you want to use this product. Lock the adapter in place and reduce load when you mount a heavy lens onto your camera, also effectively prevent signal-interrupt. Designed for 3 models of Metabones Lens Adapter Canon EF Lens to Micro Four Thirds T Smart Adapter MB_EF-m43-BT2, Canon EF Lens to Micro Four Thirds T Speed Booster XL 0.64x MB_SPEF-m43-BT3, Canon EF Lens to Micro Four Thirds T CINE Speed Booster ULTRA 0.71x MB_SPEF-m43-BT5. Mounted to the cage with two M4 screws and lock the Metabones Lens Adapter by one 14 screw. Made of aluminum alloy, sturdy and durable.

SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp 1784 mounts on standard LWS-spaced 15mm rods and is designed to take much of the weight of heavier lens off the camera's lens mount.. SMALLRIG Universal Lens Support provides physical support for long lens, thus relieving the potentially damaging pressure on the camera's lens mount.. When connected to a cinema lens's support foot or a still photo lens's tripod collar, the lens support removes the weight stress from the camera's lens mount.. Composed of lightweight aluminum, the lens support has a vertically adjustable bracket so it can accommodate 50-140mm lens diameters.. The rod clamp part is compatible with any standard 15mm LWS rig..

UNIVERSALITY SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods. ADJUSTABILITY 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position. QUICK RELEASE?The half rod clamp structure allows to quick attachmentdetachment without removing other rod-mount accessories. STABLE The lens support is one piece anti-off designed 14-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner. PROTECTION Lens support adapter comes with rubber pads to protect your lens from wear-and-tear.