Application 3 jaw gear puller is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys.. Design Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.. Material This 3-jaw removal tool is made of steel for increased strength, provides maximum strength and longevity to the gear puller.. Feature Manual Puller structure has the same load distribution, which can be securely clamped and concentrically pulled. The three-jaw gear puller evenly distributes the tension and protects the gear. Slim tie rods, steel center bolts, and apex threads Can easily grasp and enter narrow spaces.. Specifications The longest distance from the screw tip to the claw hook 3.15 inch . Spread Range 1.58 to 6.69 INCHES . Pull Capacity 2 Ton..

This tool is used to remove the drive gear from the db2, db4 and de10 fuel injection pump drive shaft, to allow removal of the pump.. Applications 6059 and 6068 engines. Oem no.ref. jdg1560. Superseded from jdg670a agricultural machinery. High quality aftermarket tool.

WIDELY USE This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.. HIGH QUALITY The 2 Jaw Gear Puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.. ADJUSTABLE 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-90mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.. GET INTO TIGHT AREAS This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application..

Powerful 7-ton Pulling Force this robust 2-jaw gear puller delivers substantial force to tackle stubborn components like gears, bearings, and pulleys in demanding automotive and industrial applications. Self-tightening, Secure Grip the mechanical self-centering design automatically tightens the bearing puller jaws during force application, ensuring a firm, slip-resistant hold for safer and more controlled pulling operations. Extended Jaw Spacing, Durable Construction the bearing puller is forged from high-strength cr-v, making it resistant to deformation, reusable multiple times, the extended jaw design allows for access to and gripping of deeply buried or hidden components. Wide Adjustment Range with a maximum spread of 9-12 inches and a reach of 8-34 inches, this two jaw bearing puller remover handles a broad range of component sizes from 30mm to over 240mm. Versatile Removal Tool this two jaws bearing puller remover is designed for extracting various pressed-on parts including stubborn gears, bearings, pulleys, flywheels, hubs, and bushings from vehicles and machinery.

The gear puller adopts quality aluminium alloy material, which is safe, reliable, durable and service for a long time.. The gear puller is widely used in removing bearings, inner rings and other dense components on your car. It is really convenient for you.. The gear puller is designed for lightweight and compact, and it is easy to install and disassemble.. The pinion gear puller is stable characteristics and high reliability, and it is suitable for most RC vehicles.. It is an upgrade parts and good replacement for the broken or old one..

Chrome Vanadium SteelThe bearing puller is made of chrome vanadium steel, which is harder than carbon steel. And mandrel has undergone special heat treatment processing, it is durable and long-term life.. Adjustable SizeThe bearing puller can be rotated in both directions to expand the working space. Adjustable clamping depth between two jaws, suitable for different sizes of gears and bearings.. Anti-Drop DesignComes with hexagonal screw and thread for fixing, non-silp and high strength.. Multiple SizesThe flywheel puller is available in four different sizes. 2inch3545mm, 3inch 3865mm, 4inch4080mm, 6inch 5590, a variety of sizes to meet your different needs. Widely UsedTwo jaw puller can easily disassemble bearings, gears and rotors. Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel and so on..

Package Includes 2-bearing puller, 1 piece of each size, 3 inch, 4 inch, 6 inch and 8 inch, 4 pieces in total,. High Quality This 2 jaw bear puller is made of high-strength and heat-treated high carbon steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.. Easy to Use Use the 2 jaw to catch the bearing Rotate the mandrel with the thread Slowly pull out the bearing of the shaft.. Adjustable Size The pulley puller tool can be rotated in both directions to expand the working space. Adjustable clamping depth between two jaw, suitable for different sizes of gears and bearings. Widely Usethe jaw bearing puller kit gear pullers Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on..

4 Different Shaft Diameter Pin 0.9mm , 1.75 2pcs ,1.9mm 2.8mm Please check the dimensions closely to the pullers diamentions.. Universal motor pinion gear puller, easy to replace the screw-pins.. It can pull the motor gears which has a maximum 11mm outer diameter and less than 12mm height.. Used Rotate the gear puller lever uniformly in a clockwise direction to extract the motor gear.. A great tools for rc model car truck. Suitable for mini motors of rc helicopter, rc plane or rc car truck. Especially fit for 116 124 rc scales car..

Ultra-Compact for Precision RC WorkMeasures 1.6 x 1.5 x 0.4 inches 40x38x10mm and weighs only 45g. Designed specifically for maintaining gears in small-scale RC vehiclesideal for hobbyist workshops, not industrial applications.. Ergonomic Handling DesignFeatures a smooth, burr-free finish for secure grip. The broad aluminum top allows you to apply even pressure while protecting delicate motor shafts and bearings during gear extraction.. Universal Fit for Popular Small RC ModelsCompatible with HSP, HPI, AXIAL, SCX10, and other major 110 to 118 scale RC platforms. Its reusable design delivers consistent performance through hundreds of maintenance cycles.. Proper Technique for Long-Term UseAlways grip the solid aluminum body when pulling to avoid stressing motor components. Correct usage ensures the tool remains reliable for repeated hobbyist gear maintenance and model repairs.. Rigorous All-Metal ConstructionForged from aircraft-grade aluminum and stainless steel components. This robust build maintains precision alignment under the extraction forces typical in RC modeling, ensuring lasting performance.. Special NoteSome motor gears are coated with high-strength industrial adhesive and may not be removable. Gear pullers are more effective for small and medium-sized motors. For motors that cannot be removed, do not force the puller, as this may bend the pins or deform the puller. Motors of the 550 series or higher, especially those that are very tight, cannot be disassembled otherwise, the disassembly tool may deform. Thank you..

Versatile 2-Jaw 3-Jaw Gear Puller This multi-purpose puller tool can be easily converted between 2-jaw and 3-jaw configurations, making it ideal for gear puller, bearing puller, and pulley puller tasks. Perfect for internal and external bearing removal, and suitable for gears, pulleys, flywheels, and more.. Reversible Adjustable Design for Flexibility Featuring reversible jaws for inward or outward pulling, and adjustable clamping depth and grip width, this tool is compatible with a wide range of bearings and gears, making it perfect for automotive, mechanical, and industrial repairs.. Durable Chrome Vanadium Steel Construction Built from high-quality chrome vanadium steel and heat-treated for strength and corrosion resistance, this gear puller is designed to handle heavy-duty tasks with ease, offering long-lasting durability.. Damage-Free Bearing Gear Removal Specially designed to safely and efficiently remove bearings, pulley, flywheels, and gears without causing damage to surrounding components. Ideal for automotive flywheels, motorcycle wheels, machine wheels, and other mechanical components.. Easy Secure Operation The hexagonal head spindle with flange prevents slipping during use, while the button on the beam enhances stability and allows for easy switching between 2-jaw and 3-jaw puller modes. This puller tool is perfect for professionals and DIY mechanics..

Function -- Replace for OTC pn 522 7393 8056 puller and protector tools.

Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action. Forged steel jaws for increased strength over investment casting. 10-ton pulling capacity, 6 152mm reach and a spread range of 0.5 to 7 inches 13 to 178 mm for increased pulling leverage. Tapered jaws for better access in tight spaces.

Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.. Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearingsenables many bearings and components to be dismounted. High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.. Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc. Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller..

Complete 4-Size Set Includes 3, 4, 6, and 8 inches 2-jaw gear pullers meets a wide range of maintenance and repair needs great for removing bearings, pulleys, gears, or other press-fit parts on cars, bikes, or machinery. German Style Design Features a classic symmetrical 2-jaw layout with a central forcing screw allows even pulling force distribution compact profile fits tight spaces designed for safe and efficient part removal. High Carbon Steel Build Constructed from heavy-duty high carbon steel offers excellent tensile strength for high-load applications resists bending or deformation during repeated use on tight or stuck components. Precision Threaded Center Rod The central forcing screw is finely machined for smooth turning and consistent torque reduces hand fatigue makes it easier to apply steady force when extracting deeply seated components. Secure Jaw Grip Jaws feature angled inner edges for better grip on round surfaces holds tightly during use without slippage adjustable reach and span accommodate various part sizes in automotive, shop, or industrial use.

Specification - 2.5 65mm Jaw Spread, 2.5 65mm Jaw Reach, 1.2T Max Force, fit for 10-65mm diameter bearings.. Durable Material - Made with heat-treated carbon steel for strength and durability.. Rustproof - The jaws are zinc plated and the screw rod is black oxide coated for corrosion resistance and long service life.. Two Jaw Design - Balances the pulling force well, not easy to fall off when applying force. Fit for pulling work in confined areas.. Universal - Can be used with a wrench, ratchet or wrench to easily remove rusted gears, sprockets, bearings, pulleys, etc..

Gear Pulling Made Easy Conquer your gear pulling tasks with Orion Motor Tech's 24-piece gear puller set, including four puller sizes with maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to ensure you're always prepared for a variety of applications.. 2-Jaw 3-Jaw Pullers This pulley puller kit comes with straight and triangular jaw brackets for 2-jaw and 3-jaw puller assemblies. Simply grab your wrench or ratchet, and tackle gear, bearing, pulley, and flywheel pulling tasks hassle-free.. Reversible Jaw Design The innovative reversible jaw design of this pulley removal tool enables you to extract parts effortlessly from both inside or outside, making your repair tasks more accessible and efficient.. 4-Position Pullers Each reversible jaw of the 4, 6, and 8 pullers boasts dual fixing holes, offering four configurations for short, standard, long, and extra-long reaches, perfect for navigating in tight spaces or accessing components deeply embedded.. Built for Durability Crafted from heat-treated steel with chrome-plated or blackened finish, each jaw puller tool is designed for superior durability and corrosion resistance. The custom blow-molded case makes organization and transport a breeze..

Aluminum Alloy Material This puller is made of CNC machined aluminum alloy and hardened stainless steel components, with a sturdy aluminum top design for easy grip. Self Alignment Protection Mechanism The patented jaw geometry automatically centers around the small gear, evenly distributing disassembly force to prevent shaft deformation. The surface is smooth and free of burrs, providing a comfortable and safe hand feel during operation. Universal Scalability 40x39x10mm 1.6 x1.5 x0.4 Compact appearance, suitable for most remote control car model, can easily accommodate various remote control car accessory storage spaces. Ergonomic Design Weighing only 45 grams 1.6 ounces, it is treated with bright red anodizing and can be operated without tools, making it easy to store in a pocket. When using, pay attention to correctly grasping the thick aluminum body at the top. Simplified Maintenance Maintaining structural integrity under high torques while preventing gear surface scratches, allowing for quick gear replacement without damaging motor bearings, making it an ideal choice for competitive racing drivers and workshop technicians.

Sturdy Construction Crafted from drop-forged Cr-V steel with heat treatment, ensuring exceptional strength and durability for heavy-duty tasks.. Precision Coatings Features fine chrome plating on jaws for corrosion protection and black phosphatized drive screw for enhanced longevity.. Versatile Jaw Configuration Reversible 3-jaw design offers flexibility for both inside and outside pulling, with a jaw spread of 3 inches and a jaw reach of 3-916 inches. The height is 3 to 34 inches and the opening is 3 inches.. High Puller Capacity Capable of handling up to 3 tons, making it suitable for a wide range of applications including gears, pulleys, bearings, and flywheels.. Compact Design Compatibility Ideal for confined areas, compatible with wrench, ratchet, or spanner for ease of use during various mechanical puller tasks..

Ultra-Compact for Precision RC WorkMeasures 1.6 x 1.5 x 0.4 inches 40x38x10mm and weighs only 45g. Designed specifically for maintaining gears in small-scale RC vehiclesideal for hobbyist workshops, not industrial applications.. Ergonomic Handling DesignFeatures a smooth, burr-free finish for secure grip. The broad aluminum top allows you to apply even pressure while protecting delicate motor shafts and bearings during gear extraction.. Universal Fit for Popular Small RC ModelsCompatible with HSP, HPI, AXIAL, SCX10, and other major 110 to 118 scale RC platforms. Its reusable design delivers consistent performance through hundreds of maintenance cycles.. Proper Technique for Long-Term UseAlways grip the solid aluminum body when pulling to avoid stressing motor components. Correct usage ensures the tool remains reliable for repeated hobbyist gear maintenance and model repairs.. Rigorous All-Metal ConstructionForged from aircraft-grade aluminum and stainless steel components. This robust build maintains precision alignment under the extraction forces typical in RC modeling, ensuring lasting performance.. Special NoteSome motor gears are coated with high-strength industrial adhesive and may not be removable. Gear pullers are more effective for small and medium-sized motors. For motors that cannot be removed, do not force the puller, as this may bend the pins or deform the puller. Motors of the 550 series or higher, especially those that are very tight, cannot be disassembled otherwise, the disassembly tool may deform. Thank you..

Easy to Use With its 5-inch-long yoke, this large gear puller is easy to use for anyone. Lubricate the screw first, then center the pushing screw over shaft end. Insert pulling bolts through yoke of puller and thread fully into tapped hole in gear, and then turn to force gear from shaft. Protected By This gear pulley removal tool is built to last, but in case something happens to your product during normal, everyday use, it will be covered by the OEMTOOLS Limited Lifetime See product manual for full conditions and details. Durable Design This gear pulley is made of sturdy steel and has two 2 516 x 18 x 6-inch long bolts. Perfect for Variety of Gears This neck pulley is perfect for servicing crank shaft gears, pulleys, and timing gears. Easy to Store The slender design allows for easy storage in your workspace. For easy identification, this large gear puller features OEM engraved and the item number.

UNIVERSAL REMOVAL TOOLS This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts. BETTER TOGETHER Our bearing puller set includes three puller sizes, offering maximum spreads of 3, 4, and 6 and reaches of 4.3, 5, and 7.3 to cover most applications. 3 JAW DESIGN These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage. REVERSIBLE JAWS Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes. TOOLS FOR MECHANICS Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Quality materials This gear puller is designed to pull worm pinion gear out from the motor shaft, the tool is made of high quality stainless steel, after heat treatment , the material is much stronger and study.. Field of Use Refit automobile motors such as electric door lock motor, rearview mirror motor, trunk motor, etc, aircraft model motors, RC toy car, tool motors, household appliances such as electric toothbrush, vacuum cleaner, electric door lock, etc, DIY, etc.. Motor Suitable for Disassembly for 130, 280 mini motors, the shaft diameter of the motor should be no more that 2.5mm, the longest worm length that can disassemble the is about 37mm,the distance between the bottom of the worm and the motor shell is greater than 1.2mm.. Upgraded Pinion Puller With bold handle, thickened operating platform, double bolt pushing design and cleverly designed fixtures, you can easily fix the motor and pull the worm out with less force, this is upgeaded small gear pulller version.. Usage Introduction First, fix the motor on the base, and then install all accessories according to the instructions in sequence, rotate the handle counterclockwise until the worm completely disengages from the motor shaft, the installation and disassembly process is very simple..

3 Piece Set Wheel bearing removal tool includes four sizes of pullers with maximum draw lengths of 3, 4, and 6, offering short, standard, long, or extra long gripping distances. Reversible Jaws Each 3 jaw puller can be reversed to remove parts from inside or outside, suitable for pulling in confined areas. 3 Jaw Design The gear puller jaws are precision-machined to form a stable triangular structure, forming a uniform tension near the bearings, which effectively prevents sliding and bearing damage while disassembling. Removal Tools Gear puller set drop-forged and heat-treated carbon steel for high hardness, corrosion resistance and durability. Easy Assembly Pulley puller tool requires only 3 minutes to install, can be used with wrenches, ratchets or wrenches, suitable for pulleys, gears, bearings, cranks and other removal work.

Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components. Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearingsenables many bearings and components to be dismounted. High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable. Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc. Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller. Application Range - Designed for removing small to medium-size bearings, pulleys, and gears. Internal Pulling Max Opening 80mm External Pulling Max Opening 110mm. Not suitable for large steering wheels, industrial bearings, or oversized components beyond these limits..

4 Sizes for Various Needs Comes with 2 in, 3 in, 4 in, and 6 in pullers, meeting different pulling force needs easily adapts to parts of various diameters and positions allows precise work from tight spaces to heavy-duty components. Heavy-Duty Material Made of carbon steel with heat-treated surfaces ensures high hardness and wear resistance delivers strong torque for removing tight bearings or gears resists deformation or cracking under high pressure. Non-Slip 2-Jaw Grip Reinforced steel jaws with widened tip contact area holds components securely to prevent slipping or sudden release provides reliable extraction of bearings, pulleys, bushings, or flywheels. Precision Threaded Rod Equipped with a finely machined T-shaped threaded shaft turns smoothly without jamming delivers controlled force with less effort makes bearing removal safe, steady, and efficient. Wide Application Great for removing gears, wheels, pulleys, and bearings from vehicles, motorcycles, machinery, and more suitable for workshops, auto repair, industrial maintenance, or home garage toolkits.

Heavy-Duty Carbon Steel Construction The 3 inch bearing gear puller is made from high-quality carbon steel with a heat-treated mandrel tip, providing excellent durability, strength, and resistance to rust and wear. Built to handle tough jobs in both professional and DIY settings.. Adjustable Jaw Depth for VersatilityThe puller features adjustable clamping depth with reversible jaws, allowing it to function as both an internal and external puller. Ideal for accessing tight or awkward areas where standard tools can't reach.. Smooth Precise Operation Secure the jaws around the bearing or gear and rotate the center screw to apply consistent pulling force. Removes components cleanly and efficiently without damaging shafts, housings, or surrounding parts.. Compact Yet Powerful Design This tool fits into tight workspaces while delivering strong pulling force. Ideal for removing gears, bearings, flywheels, and pulleys from motorcycles, scooters, cars, and various machinery.. Wide Application Compatibility A must-have tool for home garages, repair shops, and field technicians. Suitable for automotive flywheels, bike wheels, small machine gears, pulleys, and more. Reliable performance across a wide range of repair tasks..

Universal Compatibility - Works with all VE, P7100, VP44 and CP3 pumps, perfect for 1989-2012 5.9L6.7L diesel engines.. Rust-Resistant Material - Made of high-strength iron oxide to prevent corrosion during use.. Optimized Design - 0.075 deeper than standard pullers for better front cover clearance.. Professional Heat Treatment - 1650F heat treatment for 3 hours oil quench 400F tempering for ideal hardnesstoughness balance.. Complete Kit - Includes 1 gear puller and 2 heavy-duty flange bolts for professional repairs..

This 2 jaw puller is a wide range of automotive application 1.5 inches - 3.5inches 40 - 90MM giving the flexibility to complete the job. This is the perfect solution to remove objects in narrow places, helping the mechanic extract objects faster.. This pulley puller works great to remove gears or pulleys, making it useful and effective for many makes and models. A bearing puller or 2 jaw puller that will serve a mechanic effectively for a very long time.. While gear puller tool is thin and nimble, it is also crafted from heavy duty construction providing the tool strength and durability which allows access to much tighter spaces.. Effective solution for many tasks. Great wiper puller tool, gear puller, bearing puller, the jaws are reversible, so they can remove either inside or outside pulley, and overall an effective puller tool for automotive mechanics.. Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc.

Specification - 2.36 60mm Jaw Spread, 1.57 40mm Jaw Reach, 1T Max Force, fit for 10-40mm diameter bearings.. Durable Material - Made with heat-treated high carbon steel for strength and durability.. Rustproof - The jaws are zinc plated and the screw rod is black oxide coated for corrosion resistance and long service life.. Two Jaw Design - Balances the pulling force well, not easy to fall off when applying force. Fit for pulling work in confined areas.. Universal - Can be used with a wrench, ratchet or wrench to easily remove rusted gears, sprockets, bearings, pulleys, etc..

Forged CR-V Steel ConstructionThis 3-inch gear puller is made from forged chrome-vanadium CR-V steel for exceptional strength, durability, and wear resistance. The heat-treated, corrosion-resistant surface ensures long-lasting performance for bearing, gear, and pulley removal in automotive and machinery repair work.. 2-Jaw Balanced Design for Damage-Free PullingPrecision-engineered two jaws apply uniform pulling force to prevent distortion, slipping, or part damage. Ideal for removing small bearings, pulleys, flywheels, and gears during car repair, motorcycle maintenance, and equipment disassembly.. Adjustable Jaw Reach for Versatile UseFeatures an adjustable jaw opening and depth to fit various bearing and gear sizes. This compact bearing separator tool is perfect for automotive repair, machinery maintenance, and DIY mechanic projects, offering flexibility for different pulling applications.. Smooth T-Thread Screw High Torque Bar HandleEquipped with a fine-thread carbon steel center screw that provides smooth, controlled pulling force without slipping. The ergonomic bar handle delivers strong torque and easy operation, improving work efficiency even in tight repair spaces.. Secure Anti-Drop Beam for Safe OperationBuilt with an anti-drop beam structure to keep the jaws stable and aligned during use. This bearing and gear puller tool offers enhanced safety, accuracy, and reliability for automotive, motorcycle, and mechanical maintenance tasks..

Size2 inch 2 jaw pullers with max spreads of 50mm2inch,Jaw length 70mm2.76inch,beam length 65mm2.56inch,screw length 85mm3.35inch. MaterialsJaw puller made of premium high carbon steel,characterized by high hardness, high torque, and high toughness,upgraded heat treatment process,endowed it with grade wear resistance and corrosion resistance,very durable. Design AdvantagesThe two-jaw features a balanced force transmission design, minimizing lateral displacement ,reduces stress concentration on workpieces, making it ideal for delicate components that require precision removal.. Easy OperationClamp jaws evenly on the workpiece edge,align the central shaft tip with the support base vertically,rotate the top crossbeam clockwise,It can be labor-saving disassembled with ease. ApplicationsPuller As a universal removal tool, it is suitable for different flywheels, bearings, wheels and other parts.Widely used in railway vehicle maintenance, mechanical installation, support of construction projects.

Package Includes 2-claw puller, 1 piece of each size, 3 inch, 4 inch, 6 inch and 8 inch, 4 pieces in total, multiple sizes to meet your different needs. Durable Material made of heat-treated carbon steel, sturdy and durable, resistant to rust and corrosion. Easy to Use use the two jaws to hold the bearing, turn the spindle with the thread, and slowly pull the bearing out of the shaft. Usage Scenarios bearing gear pullers can reach into tight areas to safely remove gears, pulleys and flywheels from shafts in hard-to-reach locations without damaging the application. Wide Range of Applications two-jaw pullers allow easy removal of bearings, gears and rotors Suitable for automobile flywheels, motorcycle wheels, bicycle wheels, automobile wheels, machine wheels, pump bearings, generator bearings and machine bearings.

UNIVERSAL REMOVAL TOOLS This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts. BETTER TOGETHER Our bearing puller set includes four puller sizes, offering maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to cover most applications. 3 JAW DESIGN These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage. REVERSIBLE JAWS Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 and 8 gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes. TOOLS FOR MECHANICS Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Versatile Pulling Power Designed to pull gears, pulleys, bearing flanges, and flywheels from shafts and housings. Its reversible jaws offer adaptability for a wide range of tasks.. Built to Last Features a lightweight, rust-free anodized aluminum barrel, ensuring durability and longevity in your tool arsenal. A tool you can rely on for tough jobs.. Precise Control The center forcing screw, sized 38 Inch to 24 x 4-78 Inch, allows for fine-tuned adjustments, making this tool perfect for careful, meticulous work.. Maximum Efficiency With a maximum spread of 4-34 Inch and reach of 3-12 Inch, this puller can handle challenging pulling tasks, making difficult jobs easier and faster.. Customer Recognized Praised for its effectiveness in pulling an incubator belt on an analyzer, this tool is trusted by mechanics and DIY enthusiasts for its reliability and quality.. Used to pull gears, pulleys, bearing flanges and fly wheels from shafts and housings. Reversible. Maximum reach 3-12-Inch. Maximum spread 4-34-Inch. Center forcing screw 38-Inch-24 by 4-78-Inch.

High Quality Material The 2 jaw gear puller is made of forged chrome vanadium steel material. The two claws puller boasts high hardness, corrosion resistance and excellent strength, providing with a long time usage.. Perfect Size The screw length of the two claws gear puller tool is 9.5 inches. Bracket Length 10.5 inches. Due to the anti-falling pin, the actual bracket is only 9.5 inches for use. Claw Length 8 inches. Screw Diameter top 0.8 inches. Screw Diameter bottom 0.6 inches.. Adjustable Design The bearing puller tool comes with adjustable clamping depth and grip width, suitable for different sizes of gears and bearings, allowing users to safely and efficiently remove the steering wheel without causing damage.. Safety Lock Reversible Puller With anti-falling off design on the beam, it is not easy to fall off and is convenient to dismantle bearings. Our 2 jaw gear and bearing puller can be reversed to pull parts from the inside and outside. Note the anti-falling pin is not suitable for internal pulling, but it works to some extent.. Widely Used Our 2 jaw puller set is ideal for dismounting bearings and other fasteners on delicate equipment, which is suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel and so on..

Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action. Forged steel jaws for increased strength over investment casting. 20-ton pulling capacity, 9.67 246mm reach and a spread range of 1 to 15 inches 25 to 381 mm for increased pulling leverage. Tapered jaws for better access in tight spaces.

49cc 50cc 60cc 66cc 80cc 2 Cycle Engine Motorized Bicycle Bike. Package Include1 Clutch Puller.

PINION GEAR PULLER. This gear puller is designed for pulling pinion gears off small and medium-sized motors such as rc modeling motors, door lock actuator motor, 3D printer extruder, stepper motors, electric track vehicle.... REBUILD SAVE MONEY Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy A money-saver. THICKNESS. The sliding plate of the gear puller has two ends of different thickness. So it can be more likely inserted into the gap between the pinion gears and the top of the motor. A must-have RC tool. FIVE PINS. This gear puller set includes five pins for pulling pinion gears of different sizes. Three of them have circular head of 0.9mm, 1.75mm, and 1.9mm in diameter. The other two pins have semicircular head of 1.75mm and 2.8mm in diameter.. QUALITY MATERIAL. Made of quality metal, this pinion gear puller are sturdy and durable. It can be a very useful item in your hobby tool kit box for multiple use.

Complete 4-Piece Set Get the job done right with our professional 4-piece gear puller set. The kit includes 4 pcs gear puller with different Max. Spread 3, 4, 6, and 8 to handle a wide range of disassembly work like gears, pulleys, bearings, and flywheels. Perfect for mechanics, repair garages, and more.. Flexible Jaw Conversion Effortlessly switch between a two-jaw and three-jaw pulley puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.. Reversible Jaw Design Install the jaws in reverse for better grip on small-diameter hollow components in narrow spaces. Install the jaws in the forward direction to effortlessly grasp larger components and adapt to various machine parts. With double hole adjustment, the hook claw range is expanded, making it more adaptable.. Enhanced Durability Thanks to the addition of 12 locking nuts that strengthen the connection between the jaws and reduce the risk of detachment over time or during conversions. You can expect a reliable, high-quality product that will last.. Industrial Grade Strength This screw rod has been quenched and forged at high temperatures to make it incredibly durable. The jaws have undergone precision processing to ensure a strong grip. Made from tough industrial grade 45 steel, our gear puller set boasts a rust and corrosion-resistant coating for added longevity..

High Quality Material - This 2 jaw bearing puller is made of high carbon steel for strength and longevity, heat treatment process makes it more durable and corrosion resistance.. Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.. Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearingsenables many bearings and components to be dismounted. Adjustable Diameter 10-120mm.. Damage Free Removal - Removal tool kit for slide gears, pulley and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc. Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Rotate the mandrel with the thread Slowly pull out the bearing of the shaft..

Save Your Money Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy A money-saver. 5 Kinds Pins This gear puller set includes five pins for pulling pinion gears of different sizes. Pins Size 0.8mm0.031in Cylindrical, 1.3mm0.051in Semicircular, 1.5mm0.059in Cylindrical, 1.6mm0.062in Cylindrical, 2.2mm0.086in Semicircular. Omninmo bearing puller can gear with a maximum outer diameter of 11mm0.43in and a tooth height of 12mm0.47in can be extracted.. Quality Material Motor pinion gear puller is made of metal material, efficient, wear resistant, stable and reliability, easy to use.. Professional Motor Gear Remover Stable characteristics and high reliability, it is preferred by model amateur, RC enthusiasts.. Application Omninmo pinion gear puller is designed for removing bearings, inner rings and other dense components on your car. Suitable for remote control model, car inner rings and other dense components install and disassemble..

GEAR PULLER SET This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance. COMPLETE 49-PIECE SET This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes14-28, 516-18, 516-24, 38-16, 38-24, M8x1.25, and M10x1.5to suit your different needs the 4-slot yoke also allows you to use it for two or three-slot operation with ease. DURABLE PERFORMANCE Each of these crank puller tools is constructed from hardened AISI 1045 medium carbon steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service. SCRATCH-FREE OPERATION Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing. WIDE COMPATIBILITY Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.

Pull Size 2 inch Open Maximum Width 35mm 1.38 Open Maximum Depth 45mm 1.77. Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free. Made of carbon steel material for strength and longevity, it is durable.. Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc.

Save Your Money Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy A money-saver. 5 Kinds Pins This gear puller set includes five pins for pulling pinion gears of different sizes. Pins Size 0.8mm0.031in Cylindrical, 1.3mm0.051in Semicircular, 1.5mm0.059in Cylindrical, 1.6mm0.062in Cylindrical, 2.2mm0.086in Semicircular. Omninmo bearing puller can gear with a maximum outer diameter of 11mm0.43in and a tooth height of 12mm0.47in can be extracted.. Quality Material Omninmo motor pinion gear professional remover is made of metal material, efficient, wear resistant, stable and reliability, easy to use. It is a great tools for rc model car truck.. Scope of Application Omninmo gear puller set are suitable for remote control model, car inner rings and other dense components install and disassemble. Designed for removing bearings, inner rings and other dense components on your car.. Portable Convenient to carry, lightweight and compact, and it is easy to install and disassemble..

Save Your Money Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy A money-saver. Upgrade 6 Kinds Pins Upgrade the thickness of 6 types of pins, this gear puller set includes six pins for pulling pinion gears of different sizes. Pins Size 0.9mm, 1.6mm, 1.9mm, 2.0mm, 2.9mm,3.9mm. Omninmo bearing puller can gear with a maximum outer diameter of 11mm0.43in and a tooth height of 12mm0.47in can be extracted. Quality Material Motor pinion gear puller is made of metal material, efficient, wear resistant, stable and reliability, easy to use.. Professional Motor Gear Remover Stable characteristics and high reliability, it is preferred by model amateur, RC enthusiasts.. Application Omninmo pinion gear puller is designed for removing bearings, inner rings and other dense components on your car. Suitable for remote control model, car inner rings and other dense components install and disassemble..

With professional production and high precision, this bearing separator is a perfect replacement for your old or broken tool. Upgrade your gear and bearing removal experience.. ? Made from high-quality alloy steel material, this bearing separator is highly durable, rust-resistant, and scratch-resistant, ensuring a longer product lifespan.. Drop Forged, manufactured with precision and built to withstand the harshest conditions. This heavy-duty tool ensures long-lasting performance and reliability.. The bearing puller features two knife edges for a secure pulling surface, making it easy and convenient to use. Each piece is strictly controlled for perfect dimensions.. At MT MoreTechData, we stand behind the quality of our tools. If you experience any issues, please don't hesitate to contact us. We want to ensure you're only getting the best tools for the job..

Package Include 3 Jaw gear puller x 1, 8-10mm double open end wrench x 1. The wrench helps you install and disassemble, saving labor and efficiency. The black screw is made of carbon steel with electrophoretic black surface. The center frame is made of cast steel with electrophoretic black surface. Claw is made of 45 steel.. Three-Jaw Design The key feature of this jaw puller is its three jaws, which are capable of evenly distributing the pulling force around the target object. The jaws can be adjusted to fit different sizes and shapes, allowing for efficient removal without causing damage or distortion. Its stable grip and controlled operation minimize the risk of workpiece slippage or sudden release, reducing the possibility of accidents or injuries.. Reversible Jaws By simply flipping the gear puller's arms and repositioning them, you can switch between internal and external pulling operations effortlessly. The jaws allows for easy gripping and access to tight spaces. This feature eliminates the need for multiple tools and saves valuable time and effort.. Dual Purpose By simply reconfiguring the jaws, this pulley puller can also be transformed into a two-jaw puller. This conversion expands its usability, as it becomes suitable for extracting components in confined spaces or instances where a two-jaw approach is more appropriate. This adaptability enhances the tool's versatility and makes it a valuable addition to any toolkit.. Application The three-jaw puller is a versatile tool that can be used for various tasks such as removing gears, pulleys, bearings, and other press-fitted parts. It is widely used in automotive repair, machinery maintenance, and other mechanical projects..

High Quality - This 2 jaw 8 inch bearing puller is made of high-strength and heat-treated high carbon steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance. Heat treatment process makes it more good.. Adjustable - 2 jaw 8 inch bearing Remover can adjust the clamping depth. Adjustable Diameter 30-80mm. Internal pull diameter 20-85.5mm External pull diameter 38-94mm Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.. Easy to Use - Use the two jaws to catch the bearing Rotate the mandrel with the thread Slowly pull out the bearing of the shaft.. Get into Tight Hard-To-Reach Spots- This 2 Jaw 8 inch Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.. Please Noted - This is 8 inch Bearing Puller. If you need a larger or smaller size, please choose other items. Our product is not suitable for heavy-duty work. If heavy-duty work, please choose other products. Any product defects or problems, please feel free to contact me. Thank you..

This motor pinion gear puller is made of high quality aluminium alloy and steel, anodized and CNC machined with exquisite appearance and greater durability.. Designed for removing or fixing of motor pinion gear, comes with 3 adapters for shafts of 1.52.03.0mm diameter.. Wide range of applications, suitable for TRX4M SCX24 FMS FuriTek brushless motors and other motor shafts of 1.52.03.0mm diameter.. Kit includes motor pinion gear puller1, removing adapter3, mounting adapter1.. Please make sure the bottom motor shaft is on the stress point when installing..

Size - 4 gear puller, suitable for maximum bearing diameter 70mm.. Material - Made with heat-treated carbon steel for strength and durability.. Features - The double-jaw design balances the pull well, and the claws are precision machined to slip and grip the gears securely. Pulling work can work in tight areas.. Applications - Can be used with a wrench, ratchet or wrench to easily remove rusted gears, sprockets, bearings, pulleys, etc.. Package Content - 1 x Two Jaw Gear Pullers.

High Quality --- This is a two jaw gear puller, which is made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable. This tool is used for tearing down ball joint in parts of the combined mandrel brake system.. Easy Operation --- Use the two jaws to catch the bearing Rotate the mandrel with the thread Slowly pull out the bearing of the shaft. The puller can be bilateral rotation, enable laser stretching size and working space.. Wide Application --- Widely use in various bearings that are not easy to disassemble. Perfectly fit for automotive flywheel, motorcycle wheel, car wheel, scooter motorcycle bearing and gear and so on.. Adjustable Design --- Two jaw with adjustable clamping depth, fit for different size gears and bearings. Comes with hexagonal screw and thread for fastening, non-silp and high strength.. Get Into Tight Areas --- This bearing gear remover can remove gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application..

Carbon Steel Material - The 2 Inch bearing gear puller is made of high-quality carbon steel material, the point of the mandrill through a special heat treatment process, solid for long service life with great performance.. Function - This 2 Inch 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.. Great for - The 2 Inch puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings. Adjustable for Different Gears and Bearings.. Enhanced Durability - Special heat treatment processing. Long use life. Adjust screw design and convenient to repaired different size gears and bearing. Fit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on.. Wide Applications - This 2 Inch bearing gear puller is ideal for motorcycle wheel, bicycle wheel, machine wheel and so on. Please Noted Our 2 inch puller, it is being light to medium duty. Not suitable for heavy-duty work..

MaterialCarbon Steel Color Black,Brass Tone. Dimension 12.5 x 8 x 3cm 4.9 x 3.1 x 1.2 inchesLWT. Claw Size 10 x 3 x 0.5cm 3.9 x 1.2 x 0.2 inchesLWT. Weight378g. Package Content 1 x Two Jaw Puller Tool.

Adjustable 2 Jaws - Two jaw with adjustable clamping depth, fit for different size gears and bearings. Adjustable clamping depth between two jaws, suitable for different sizes of gear or bearing. It is very easy to install and use, saving time.. High Carbon Steel - These two claws gear puller, which is made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable.. Useful Design - Adjust screw design, flexible and convenient to repair different size gears and bearings. Into Tight Areas bearing gear remover can remove gears, pulleys, and flywheels off a shaft in hard-to-reach spots without damaging your application.. Easy to Install - Use the two jaws to catch the bearing Rotate the mandrel with the thread Slowly pull out the bearing of the shaft. The puller can be rotation, enable stretching size and working space. It is very easy to install and use, saving time.. Widely Used - Two jaw puller can easily disassemble bearings, gears and rotors. These two jaw gear pullers are suitable and ideal for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing generator bearing, machine bearing and so on..

7 ton capacity, long 2 jaw. Maximum reach of 8-34 inches. Maximum spread of 9-12 inches. Jaw thickness is 1132 inch. Jaw width is 1 inch.

Heat treated alloy steel. Drop forged for strength. Chrome plated finish. Size 4 2 Jaw.

OTC's 7393 Gear and Pulley Puller is perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes. Puller features a spread of 1-12 inches to 4-14 inches. Puller block is 4-78 inches wide. 5-12 inch long center screw includes 2 ea. 38-16 x 3 inch long hex head cap screws. High-grade materials ensure quality performance over the lifetime of the tool.

Can be assembled with standard or long reach for maximum versatility. Convenient for both internal or external pulling. Maximum reach 3.375-Inch. Maximum spread 4-Inch. Reversible jaw for convenience when doing internal or external pulling jobs.

Heat treated center screw. Chrome vanadium jaws. Drop forged for strength. Chrome plated finish. DURABLE CONSTRUCTION MIG welding Industrial grade air hose with standard tire air chuck.

Gear pullers are used to remove bearings, inner rings and other dense components on automobiles.. Easy to use, light and compact, easy to install and remove.. It's a great upgrade to replace damaged old accessories and can help take better control of your car.. The motor gear puller is specially designed for for cars and is suitable for most car use.. The gear puller is high-quality alloy material, which is and wear-resistant..

Durable ConstructionThe Gear Puller Remover is crafted from high-quality steel, offering exceptional strength and durability. Designed for long-term use, this puller is suitable for your remote control cars, ensuring it withstands any demanding application.. Compact DesignFeaturing a compact size, the Mini Gear Pullers is easy to carry and store. Its eye-catching appearance and fine workmanship not only make it functional but also visually appealing, adding a touch of style to your toolbox.. User-Friendly operatThe Pinion Gear Remover is designed for convenience. Its simple operat allows users to quickly and efficiently remove gears without complications, making it ideal for both beginners and experienced hobbyists.. Versatile ApplicationsThis Gear Puller is universally compatible, making it suitable for various remote control car model like HSP, HPI, and Axial SCX10. It's a must-have tool for any RC car enthusiast looking to maintain their vehicles effectively.. Precision EngineeringWith a bright finish and no burrs, the Motor Gear Puller ensures precise gear removal. This quality guarantees smooth operat and enhances the longevity of your RC parts, making maintenance a breeze..

Gearwrench's Internal and External Ratcheting pullers have a time-saving, indexing jaw design. Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help. Pullers can also be converted to two- and three-leg pullers. Jaws can be reversed from external to internal style in seconds. Maximum spread of 3-14 inches on 2 ton puller.

4 Way 2 Claw Reversible Puller offers dual functionality, its reversible claws easily convert for internal or external pulling applications, providing a practical solution for various removal tasks. Strong and Durable crafted from solid carbon steel with a metallic silver-black finish, this robust 2 claw puller withstands heavy use, it delivers a reliable 2-ton pulling capacity for demanding mechanical work. Efficient and Precise designed as an effective gear puller, it smoothly removes tightly fitted gears, the hardened center screw applies steady, even pressure to help prevent damage to components during disassembly. Adjustable Sliding Claws this adaptable gear puller features sliding claws that adjust quickly to fit different part sizes, up to a 4-inch maximum spread, it is suitable for use in confined spaces. Versatile Application function as a practical pulley puller for automotive repair, small engine maintenance, and DIY projects, its compact design facilitates operation in tight areas.

INCLUDES This master ratcheting gear puller set offers broad coverage for a variety of removal and puller projects, with 2-ton and 5-ton capacity units, short and long leg options, and convertible 2-leg and 3-leg functionality for superior versatility. This set includes one each 2-ton and 5-ton ratcheting puller yolk and push rod screw, three short puller jaws, and three long puller jaws, as well as a durable storage case.. DESIGN With puller yolks and jaws constructed of chrome moly steel and push rod screws made of carbon steel, this set is finished with durable black phosphate that enhances each pieces resistance to wear and corrosion. The ratcheting design of these pullers holds jaws in place while aligning to an object, making it simple to secure and stabilize grip on any object.. APPLICATION With 2-ton and 5-ton capacities, this gear puller set is perfect for any toolbox, with application uses for both home projects and professional work. The convertible design allows these pullers to be used in both 2-jaw and 3-jaw configurations, making them usable even in more confined and recessed spaces. This gear puller set is ideal for timing gears, bearings, pulleys, and other vehicle maintenance, and even for servicing machinery from fans and motors to construction equipment.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Master Ratcheting Gear Puller Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization..

High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.. Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.. Specification - The screw length of the two jaws puller is 6.5 inches165mm,Bracket Length6 inches 159mm,Screw Diameter top 14mm,Screw Diameter bottom 13mm,Claw Length5.6inches140mm,Claw Thickness 3-5mm, For more size description please see size picture and video.. Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. Perfectly suitable for car flywheels, motorcycle wheels, car wheels, scooter motorcycle bearings and gears, etc.. High quality after-sales service - Customers feedback always matters. The goal of our Wanlian brand is to make you satisfied with buying. If youre not 100 content with our 6 inch two claws gear puller, please feel free to contact us. We'll try our best to provide you with a satisfactory solution..

This Puller designed for professionally dual-purpose use. Easy and safely to remove the stuck on the rear wiper arm. Use to remove battery terminal clamp without damage to cause battery post. Jaw opening 116 - 1-116 6-28mm Outer diameter1-78 48mm. Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline. BEST SELLER in the whole wiper arm puller market, according to a large number of after-sales feedback, our products have received 99 positive reviews, and we are the only quality seller on the market with a multi-year warranty.

Complete 6-Piece Set for 1-8 Applications Cover small bearings to large flywheels with six pullers 123468 inch featuring max force from 1.1 to 4.4 tons Reversible jaws and dual-hole design enable flexible internal or external pulling in tight spaces. Switchable 2-Jaw3-Jaw for Optimized Grip Use 2-jaw for high linear force on small parts or 3-jaw for triangle-grip stability on heavy components Both configurations require no installation and include 12 locking nuts to prevent slippage. Industrial 45 Steel Anti-Deformation Build Forged steel jaws and heat-treated screws withstand 1000 uses without bending The anti-rust coating ensures durability in garages or workshops under heavy-duty conditions. Multidirectional Pulling for Complex Tasks Jaws reverse inside-out or up-down for flexible access to gears pulleys bearings and brake discs in confined areas Ideal for automotive repair and machinery maintenance. Secure Locking System Wide Compatibility 12 included locking nuts provide extra safety during high-tension operations while the set works on flywheels hubs steering wheels and other mechanical components.

VERSATILE BEARING PULLER This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels. All-in-One Tool Kit Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 7-15 forcing screw, four 4-13 extension screws, four 5-13 extension screws, and two 5-35 L-type legs. WIDE APPLICATION The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks. EFFECTIVE OPERATION The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing the included tools enable you to reach and remove bearings in tight spaces effectively. DURABLE CONSTRUCTION Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use.

2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.. This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.. 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.. The button makes it easily to change the puller into internal or external gear puller.. There are 5 different sizes of jaw puller for you to choose to deal with different parts small, medium and large 3, 4, 6, 8, 10.

Versatile Gear Puller for Multiple ApplicationsThis 2 jaw gear puller works as a reliable bearing puller and pulley puller, ideal for removing gears, pulleys, flywheels, and bearings without damage. Perfect for automotive, motorcycle, bicycle, and machinery repairs. Heavy Duty CR-V Steel ConstructionMade from heat-treated CR-V steel, this puller tool delivers high strength and durability, resisting bending or breaking under heavy pulling force. Internal External Reversible DesignThis 2 jaw puller can be easily reversed for internal or external pulling, offering flexibility for different repair tasks and tight working spaces. Easy to Use with Quick AdjustmentDesigned for convenience, this gear puller 2 jaw allows quick setup and smooth operation, making it suitable for both DIY users and professionals. Available in Multiple Sizes for Different NeedsThere are 6 different sizes of 2 jaw gear puller for you to choose to deal with different parts small, medium and large 3, 4, 6, 8, 10, 12.

High Quality Material - The 14 inch 2 jaw gear puller made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.. Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.. Adjustable Design - Adjustable clamping depth and grip width, the 2-jaw separator tool suitable for different sizes of gears and bearingsenables many bearings and components to be dismounted. Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, brake drum, etc. Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller..

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more. Three jaws come with fine chrome plating to provide effective corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. Each of the three 3-jaw gear and bearing pullers can be reversed by simply flipping and repositioning to pull parts from inside or outside. The jaws can also be interchanged to accommodate different sizes and shapes, allowing for quick removal without damage or deformation. The 3-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Jaw Spread 3 inch Jaw Reach 3-916 inch Puller 3 T Maximum use range 75 mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. This size is measured by hand and may have slight errors. Please carefully confirm the size before purchasing.

Best Automotive Wiper Arm Puller Designed for professionals dual-purpose usage to remove battery terminal clamp without damage to battery postThe puller screw pad is designed to fit the top of the spline post for easy pulling. Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline.. There are two wiper arm are available, One is the fixed type and the other is a Bar and ball bearing with rotating mechanism. The windshield wiper removal tool will help you to remove the wiper arm easily and not damage the wiper arm or hood fairing during disassembly.. Place the wiper arm puller tool foot to be fastened securely to the wiper arm, and then clamp turn center screw or tighten the strong screw on the wiper shaft to remove the wiper arm.. Made of 45 carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.. Jaw opening 116 - 1-116 6-28mm Outer diameter1-78 48mm Package Included 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool 1 x Wiper Arm RemoverCollar Size Approx.15.2mm .

Complete 2-Piece Set Our gear puller set comes in two convenient sizes, 3 inches and 7 inches, making it perfect for disassembling various components such as gears, pulleys, bearings, and flywheels. Whether you're a mechanic or run an auto repair shop, these tools are essential for your needs.. Effortless Assembly With our two-step quick installation, you can have your pulley puller ready to use in just one minute. Unlike traditional pullers, our design minimizes the number of screws and nuts required, reducing the risk of loose parts during frequent hook switching.. Flexible Jaw Conversion Effortlessly switch between a two-jaw and three-jaw wheel puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.. Built for Durability Our gear puller is built to withstand tough tasks. The high-temperature quenched screw, finely processed hook and claw, and industrial-grade 45 steel construction ensure longevity. A rust and corrosion-resistant coating adds to its durability.. Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help.

PREMIUM BEARING PULLER HQSSWUCH bearing puller set is built with rugged drop-forged construction and made of heat-treated high hardness red steel, for ultra strength. Inner hole three-jaw puller coated with black oxide finish ensures corrosion resistance and long-term durability, easy disassembly of stubborn bearings.. EASY DISASSEMBLYOur bearing puller kit is a kind inner bearing puller tool, choose a suitable collet to place in the middle of bearing inner ring and outer ring, use a wrench to twist the bearing puller tool top rod screw, the bearing will be easily taken out, without damaging the repair parts. It is the most ideal tool for maintenance industry.. SPECIALTY STORAGE BOXBearing removal tool each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. with precision sized slots for each component, It keeps your gear organized while extending the life of your tools.. WIDE APPLICATIONThis internal bearing puller set contains six different dimensions and specifications of collets, can remove a variety of different shapes, different sizes of bearings. Three new hooks are added to make disassembly easier and can be applied to more bearings of different specifications.. APPLICABLE MODELS6005 6006 6007 6008 6009 6010 6205 6206 6207 6208 6209 6210 6305 6306 6307 6308 6309 6310. Three grips can also remove more different types of bearings, gears and kits.. FRIENDLY REMINDER Recommended to apply lubricant to the threaded rod before use, this will make ensuring smoother and faster removal work, and will also effectively protect and extend the service life of the bearing puller..

Versatile Applications This gear puller kit is essential for removing gears, hubs, ball races, bearings, pulleys, and sprockets. It's widely used in vehicle, mechanical, and equipment maintenance. Also great for extracting flywheels from smaller engines like outboards and lawn mowers. Multiple Sizes The puller set can be configured with 2 or 3 claws based on operational requirements, broadening its utility. It comprises four sizes with max spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2, ensuring readiness for diverse applications. Reversible Jaws Gear puller set has 2 or 3 legs with reversible jaws for insideoutside pulling. Dual fixing holes create strong link with forcing bar and provide shortlong reach. Adjustable double holes for flexible usage, easy to grab in tight spaces. High-strength Construction The bearing puller set is made of high-quality chromium vanadium steel, precision machined, drop forged, and heat-treated for durability. It has a chrome-plated surface for increased corrosion resistance, ensuring a longer lifespan. Safe and Easy Disassembly The 3 jaw puller works with hand, ratchet, or combination spanners to remove rusted parts safely. It features reinforced jaws with ample depth for secure component grip and even force distribution, preventing damage. Larger sizes have swivel thrust plates to protect shaft ends.

Professional Puller Set SEEKSELF Pullers are forged from high-strength heat-treated CrV steel, and equipped with thickened connecting plates and non-slip spacers for lightheavy duty work. It also comes with a labor-saving ratchet wrench and sockets, detailed instruction manual, sturdy blow-molded storage box and beautiful packaging.. Reversible 2 or 3 Jaws Design For easy storage, the tool needs to be assembled. Can be assembled as a two or three jaw puller sharing the same set of brackets. Reversible jaws make it possible to convert from an external to an internal puller. Comes with detailed illustrated instructions and wrenches.. Application It can be used to remove gears, bearings, flywheels, hubs, ball races, crank pulleys, stuck rotors and sprockets, etc. Before purchase, measure whether it meets the maximum working range of the pullers.. Size Range 4 different sizes of gear pullers are available by assembly. The maximum reach can exceed 3, 4, 6 and 8 i.e. 75mm100mm150mm200mm when mounted to the lower mounting holes, and can be extended to 4.7, 6.7, 7.5 and 9.1 i.e. 120mm170mm190mm230mm when switched to the upper mounting holes, covering common size ranges.. Packing List This Gear Bearing Puller Kit includes 4 sets of Jaw Pullers assembly required, 1PCS 38-Inch Drive Ratchet Wrench with 3PCS Sockets15mm, 18mm, 20mm, 2 sets of open-end wrenches are used for installation. It also comes with a nice instruction manual and packaging.. Quality and Durability The Gear Bearing Removal Tool set is suitable for both light and heavy work. The tool is forged from heat-treated CrV steel, which ensures the strength and durability of the Jaws and Ejector Rod. The surface of the jaw is finely polished, and the appearance texture is better. The thickened connecting plates, non-slip gaskets, and reinforced ejector rods make heavy-duty work more reliable.. Tips 1. Before operation, make sure that all jaws have firmly grasped the gearsbearings, etc. 2. The set already includes the wrenches needed for assembly and disassembly. 2. Use the included wrench, or use it with your impact wrench, which is more labor-saving..

MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications. HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust. COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles. PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization. 100 SALE SUPPORT -We back up all products for life, 247 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone.

Carbon Steel Material The bearing gear puller is made of high-quality carbon steel material, the point of the mandrill through a special heat treatment process, solid and durable for long service life. Two Jaw Design Two jaw with adjustable clamping depth, which makes the bearing puller fit for different size gears and bearings. Bilateral Rotation Design This bearing puller tool is used for tearing down ball joint in parts of the combined mandrel brake system The puller can be bilateral rotation, enable stretching size and working space. Widely Applicable The bearing gear puller tool is suitable for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc. Easy to Install The 2 jaw puller comes with hexagonal screw and thread for fastening, non-silp and high strength, no complicated operations are required.

15T Pulling Capacity The 15T hydraulic gear puller ensures professional mechanical maintenance and disassembly work, with a maximum pulling size of 12 304.8 mm. Ideal for various tasks such as machine maintenance, bearing, gear, pulley disassembly, railwayship maintenance, and mining equipment maintenance.. Leak-Proof Design The integrated casting oil cylinder and oil cover effectively prevent cracking and oil leakage. The thickened pump body with clear threads on the surface provides high torque and a maximum stroke of 2.2 inches 55 mm, allowing for closer to the target object, enabling a shorter stroke and more efficient pulling process.. Horizontal and Vertical Operation This gear puller allows horizontal and vertical pulling operations, making working on machine components facing different directions convenient. The included extended handle ensures more flexible and labor-saving operation.. Flexible Jaw Conversion Easily switch between a two-jaw or a three-jaw wheel puller as needed. Two jaws provide stronger pulling force and quick extraction of small bearings and gears. For operational stability, install the two claws diagonally. The three-claw gear puller forms a triangular structure, providing more uniform tension, and is ideal for firmly grasping heavy and large components during disassembly.. Industrial-Grade Strength The pump body is forged through high-temperature quenching, ensuring it remains sturdy even after long-term use, without deformation or bending. The finely processed jaws deliver stronger grip strength. The whole hydraulic pulley puller is crafted from industrial-grade steel with a high-quality rust and corrosion-resistant coating..

Durable Material The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T 33069 lbs maximum capacity and a long service time.. Adjustable Jaws You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.. Bidirectional Operation The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2 50 mm axis travel with 7 180 mm max reach and 12 300 mm max spread.. Humanized Design Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility.. Diverse Scenario A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..

FUNCTION

DAMAGE-FREE REMOVAL This Mofeez 3 4 6 3 jaw gear puller gear removal tool for slide gears, pulley, and flywheel makes removal simple and damage-free.. BUILT TO LAST Constructed from forged and hardened steel for strength and longevity Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.. VARIOUS APPLICATIONS Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.. 3 OR 6 POSITION DESIGN The universal and reversible jaws offer versatile inside or outside grip along with short or long reach The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.. PACKAGE CONTENTS Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach..

POWERFUL FUNCTIONProfessional tool for commercial or occasional use.High quality general purpose puller set for gears, pulleys and hubs etc.. Suitable ForSuitable for the removal of gears, hubs, ball races, bearings, pulleys and sprockets,Even can be used for flywheels on small engines like found in outboards, lawn mowers etc.. Widely Compatible Double ended adjustable, reversible legs adjusted using the nuts and bolts at the joints.Suitable for both internal and external applications.Hex head forcing screws suitable for use with a ratchet or spanner,Swivel thrust plates on the larger sizes prevents damage to shaft ends.. Excellent QualtiyMade of heavy duty steel, high hardness and strong, bear high-intensity pressure not easy to deformation and fracture, the exterior is coated with antioxidant layer to prevent rust, extended service life, and all tools put in a box. Easy To CarryAll tools package in a premium durable plastic carrying case for convenient transportation, quick organization safe storage..