Compatible Model--- Transmission Slip Yoke compatible with Ford C-6 for T45 and for TREMEC Transmission. Interchange OE Part Number--- Transmission Slip Yoke replace 2-3-6041X. Slip Yoke Specification--- 1330 Series. Spline Count 31. Spline Type 30 inside yoke Based On 31 trans output Spline. Slip Yoke Specification--- Slip Yoke Length 6.456'' Center Line to End of Spline, Outside Yoke Dimension E 3.74'', Bearing Cap Diameter D 1.062'', Hub Diameter R 1.688''. NOTE--- Please confirm whether your model part number of car matches the part number on our list before purchasing. Professional installation is strongly recommended. not including instructions.

FitmentThe Drive Shaft Slip Yoke is compatible with Turbo 350 TH-350 T56 T375 T5 T10 M21 M20 700R4 4L65E 4L60E 200-R4 Saginaw Powerglide. Replace number 2-3-12051X,1330 Series Driveshaft Slip Yoke.. SpecificationNumber of splines 2627,Outside Yoke Dimension inches 3.875,Bearing Cap Diameter inches 1.062,To End Of Spline inches 6.760,Hub Diameter inches 1.502,Spline OD inches 1.176.. Material Made of metal.. Package include1 2-3-12051X Slip Yoke.

Compatible Model--- Transmission Slip Yoke compatible with Ford C-6 for T45 and for TREMEC Transmission. Interchange OE Part Number--- 2-3-6041X, 5-134X. Slip Yoke Specification--- 1330 Series. Spline Count 31. Spline Type 30 inside yoke Based On 31 trans output Spline. Slip Yoke Specification--- Slip Yoke Length 6.456'' Center Line to End of Spline, Outside Yoke Dimension E 3.74'', Bearing Cap Diameter D 1.062'', Hub Diameter R 1.688''. NOTE--- Please confirm whether your model part number of car matches the part number on our list before purchasing. Professional installation is strongly recommended. not including instructions.

Compatible Model--- Transmission Slip Yoke fit for Turbo Hydromatic, fit for Turbo 350, fit for Powerglide fit for 700R , 700R4 , 4L60 , 4L60E , fit for Saginaw 3 Speed, fit for Saginaw 4 Speed fit for Muncie 4 Speed, fit for Borg Warner T-4, T-5 and T-10 fit for Jeep Cherokee 4WD 1992-1996, fit for Jeep Comanche 4WD 1992, fit for Jeep Wrangler Base, SE, Islander, Renegade Sahara 1992-1995, fit for Jeep Grand Cherokee 4WD 1993-1996, fit for Jeep Cherokee RWD 2.5l Manual 1995, fit for Jeep Grand Cherokee RWD 1997-1998. Interchange OE Part Number--- Transmission Slip Yoke replace 2-3-6081X. Slip Yoke Specification--- 1310 Series. Spline Type 26 Based on 27 Spline. Slip Yoke Specification--- Slip Yoke Length 5.469'' Center Line to End of Spline, Outside Yoke Dimension E 3.469'', Bearing Cap Diameter D 1.062'', Hub Diameter R 1.500''. NOTE--- Please confirm whether your model part number of car matches the part number on our list before purchasing. Professional installation is strongly recommended. not including instructions.

Compatible WithSlip Yoke Compatible With GM THCompatible With GM Turbo HydromaticCompatible With GM Turbo 400Compatible With 4l80E 4L85ECompatible With Muncie M21 M22Compatible With Borg Warner Super T10. Uses 1350 Series Universal Joint Replace Number5-178X5178X5-1350X51350X331. Replace Number3-3-2431X332431X NoteThe listed part numbers are for reference only.. Designed for ReplacementManufactured with reference to original specifications and thoroughly checked before shipping.. Customer SupportIf the product develops any issues due to quality under normal use within 6 months, please contact us. We will assist you with a refund or replacement.. NoteTo ensure your vehicle's safety and the proper use of this product, we recommend having it installed by a professional technician..

Vehicle Fitment The slip yoke fits for GM THTurbo HydromaticTurbo 400 for 4l80E 4L85E for M21 M22 for Borg Warner Super T10 for the Following GM Transmissions Transfer Cases and has been in use since the 1960's. Transmission Yoke Dimensions Ground Hub Dia 1.885, Center of joint to end 5.500, U-joint, cap diameter 1.188, U-joint width 3.875, Series 1350, Spline count 31 based on 32. OEPart number 3-3-2431X. Fitment Type Direct Replacement. No need to modification, drilling, welding. Warranty maXpeedingrods warrants its products against manufacturing defects under normal use for 1 year since the date of purchase, and lifetime technical support and customer service.

REFERENCE OEM NUMBER GM40021420, 88964470, 3-3-5551X, 22944357. FITMENT dokoyeo Transmission Slip Yoke Compatible with GMDodge Turbo 400, TH 4004L80E 4L85E TC, for 1350 Series. 1998 - 2007 GM NP246, NP261 NP263 transfer cases. HIGH QUALITY MATERIAL The drive shaft slip yoke is made of high-quality, durable 40Cr forged steel through exquisite craftsmanship, ensuring sturdiness and long-lasting performance. EASY INSTALLATION 3-3-5551X transmission slip yoke is easy to install. It effectively reduces vibration and lowers noise, providing a comfortable driving experience. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding.

Replaces Part Number Chromoly Slip Yoke Replacement for 2-3-12051X. Fitment Compatible with Various 27 Spline GM transmission Output Shafts Including Turbo 350 TH-350 T56 T375 T5 T10 Saginaw Powerglide M21 M20 700R4 4L65E 4L60E 200-R4. Specification 1330 Series Transmission Slip Yoke with Counterbore Number of Spline 31 26 Based on 27 Spline. Product Size Center Line to End of Spline J6.760'', Outside Yoke Dimension L 3.875'', Bearing Cap Diameter D 1.062'', Spline Outside Diameter 1.176'', Hub Diameter R 1.502''. Tips As the Drive Shaft Slip Yoke is similar in appearance and shape, please check the details and OE number before placing an order.

Compatible Model--- Transmission Slip Yoke fit for Turbo Hydromatic, fit for Turbo 350, fit for Powerglide fit for 700R , 700R4 , 4L60 , 4L60E , fit for S aginaw 3 Speed, fit for Saginaw 4 Speed fit for Muncie 4 Speed, fit for Borg Warner T-4, T-5 and T-10. Fit for Jeep Cherokee 4WD 1992-1996, fit for Jeep Comanche 4WD 1992, fit for Jeep Wrangler BaseSEIslanderRenegadeSahara 1992-1995, fit for Jeep Grand Cherokee 4WD 1993-1996, fit for Jeep Cherokee RWD 2.5l Manual 1995, fit for Jeep Grand Cherokee RWD 1997-1998. Interchange OE Part Number--- 2-3-6081X, 5-153X. Slip Yoke Specification--- 1310 Series. Spline Type 26 Based on 27 Spline. Slip Yoke Specification--- Slip Yoke Length 5.469'' Center Line to End of Spline, Outside Yoke Dimension E 3.469'', Bearing Cap Diameter D 1.062'', Hub Diameter R 1.500''. NOTE--- Please confirm whether your model part number of car matches the part number on our list before purchasing. Professional installation is strongly recommended. not including instructions.

Slip Yoke for GM vehicles with 1350 Series u-joints, 32 spline and matching measurement specs.. Compatible with Neapco N3-3-2431X, Compatible with Sonnax T3-3-2431CBHP T3-3-2431CBH Trans Slip Yoke with counter bore, Compatible with PTI 3503-326 3503-324 Slip Yoke Bolt on uses Strap Kit, This part is compatible with 5-1350X U-joint. The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.. If you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5 short barrel counter bored slip yoke.. Fits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E and confirm dimensions for transfer cases fitment..

Replace the OEM number2-3-8251X. Fitment Compatible with 5-153X - 5-1310X U-Joint 1310 Series. Fitment Compatible with Ford C-4 - T-5 Top Loader T-9 T-10 Tremec 3550 AOD 2-3-8251X. Fitment Compatible with Ford C-4AODT5 Transmission. Specification27 Based on 28 Spline Outside Yoke Dimension E In.3.466 Bearing Cap Diameter D In.1.062 To End Of Spline J In.6.500 Hub Diameter R In.1.500.

Replace the OEM number2-3-5981X, T2-3-5981HP. Fitment Compatible with 1330 Series 5-213X U-Joint. Fitment Compatible with 2728 spline Ford, Lincoln, Mercury transmission cases including AOD, C4, T-5, T-10, Top Loader, Tremec Tr3550, and some Transfer cases.. SpecificationOutside Yoke Dimension E In. 3.875 Bearing Cap Diameter D In. 1.062 To End Of Spline J In. 5.906 Hub Diameter R In. 1.500 Spline O.D. STD 1.220 No. Of Splines 2728. NOTES The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft. It can used on Front or Rear Driveshafts,You can use on a 1330 Series CV Driveshafts or Weld Yoke Style Driveshafts..

Design type spring loaded multi-lip. Temperature range -20F to 300F -29C to 49C. Resistance to EP lubricants. Low swell in hydrocarbon fluids. Delivers quality and reliable performance for every type of repair. Material Polyacrylate. Design type Spring loaded multi-lip. Temperature range Minus 20 degree Fahrenheit to 300 degree Fahrenheit. Compatible with most oils and EP lubricants at higher operating temperatures. High resistance to oxidation and ozone, and has low swell in hydrocarbon fluids.

Replace the OEM number2-3-8021KX. Fitment Compatible with U-Joint 1310 Series. SpecificationNo. Of Splines 16. SpecificationOutside Yoke Dimension E In.3.469 Bearing Cap Diameter D In.1.062 CL To End Of Spline J In.7.875 CL To Face Of Plug F In.1.500 Spline O.D.1.375. It can used on Front or Rear Driveshafts,You can use on a 1310 Series CV Driveshafts or Weld Yoke Style Driveshafts..

Replace the OEM number3-3-5551X 22944357GM40021420, 88964470,. Fitment Compatible with GM TH Turbo Hydromatic Turbo 400 4l80E 4L85E. Fitment Compatible with 1998 - 2007 GM NP246, NP261 NP263 Transfer Cases. Fitment Compatible with GM Magna NP246, NP261 NP263 Transfer Case Rear Slip Yoke. Specification1350 Series U-Joint TD-331Muncie M21 M22Borg Warner Super T1032 Spline Outside Yoke Dimension E In.3.875 Bearing Cap Diameter D In.1.188 To End Of Spline J In.7.940 Hub Diameter R In.1.886.

This is a new updated type 1310 Transmission Slip Yoke ,Forged Chromoly.Special treatment.. Spline Count And Type 26 Base On 27. Fits For GM Turbo 350,Powerglide, 200-4R, TH350, 4L60 700-R4, 4L60-E Muncie M20, M21 M22 with 27-tooth spline Saginaw 3- 4-speed If you need the slip yoke without the step for cover,please choose the SKU CL-HOQJ-4COT. OE No.2-3-6081X , Sonnax No.T2-3-6081HP. This New 2-3-6081X slip yoke is an excellent upgrade over factory style transmission yokes, adding strength and durability ..

1350 Transmission Slip YokeSplines Type 31 Base on 32. Compatible With THM 400, 4L80E, Muncie M-20, M-21, M-22, BorgWarner T-10 ,C2500 1992 - 1999 6L50,6L80E. OE No.3-3-5571X Sonnax No.T3-3-5571HP. Full CNC machined,Little Run out ,Oxided treatment,Performace working. This New slip yoke is an excellent upgrade over factory style transmission yokes, adding strength and durability at an affordable price..

Replace the OEM number2-3-12051X. Fitment Compatible with TH Turbo Hydromatic Turbo 350 700R 700R4 4L60 4L60E Powerglide Saginaw 3 Speed Saginaw 4 Speed Muncie 4 Speed Borg Warner T-4, T-5 and T-10. Fitment Compatible with 1330 Series Universal Joint 5-213X - 354. SpecificationOutside Yoke Dimension E In. 3.875 Bearing Cap Diameter D In. 1.062 To End Of Spline J In. 6.760 Hub Diameter R In. 1.502. SpecificationSpline O.D. STD 1.176 No. Of Splines 2627.

Replace the OEM number2-3-6081X. Fitment Compatible with 700R , 700R4 , 4L60 , 4L60E , Saginaw 3 Speed Saginaw 4 Speed. Fitment Compatible with GM TH , Turbo Hydromatic , Turbo 350 , Powerglide. Fitment Compatible with 5-153X, 5-1310X U-joint 1310 Series. Specification1310 Series U-Joint TD-32926 Based on 27 SplineMuncie 4 Speed Borg Warner T-4, T-5 and T-10. Outside Yoke Dimension E In.3.466 Bearing Cap Diameter D In.1.062 To End Of Spline J In.5.469 Hub Diameter R In.1.500.

Replace the OEM number 2-3-10431X. Fitment Compatible with 5-153X Universal Joint Compatible with GM TH Turbo Hydromatic Turbo 400 4l80E 4L85E. StyleOutside Snap Ring. Specification1310 Series, Slip Yoke Length5.500 inch Center Line to End of Spline. SpecificationOutside Yoke Dimension E In.3.466 Bearing Cap Diameter D In.1.062 Hub Diameter R In.1.885.

Compatible Model--- Transmission Slip Yoke compatible with GM TH, for Turbo Hydromatic, for Turbo 400, for 4l80E 4L85E, fit for Muncie M21 M22, fit for Borg Warner Super T10. Interchange OE Part Number--- Transmission Slip Yoke replace 3-3-2431X. Slip Yoke Specification--- 1350 Series. Spline Type 31 inside yoke Based On 32 trans output Spline. Slip Yoke Specification--- Slip Yoke Length 5.500'' Center Line to End of Spline, Outside Yoke Dimension E 3.625'', Bearing Cap Diameter D 1.188'', Hub Diameter R 1.885''. NOTE--- Please confirm whether your model part number of car matches the part number on our list before purchasing. Professional installation is strongly recommended. not including instructions.

Please compare with the size on the picture before ordering.. Outside Yoke Dimension 3.466 inch. Bearing Cap Diameter is 1.062 inch. To End Of Spline is 5.5 inch. Hub Diameter is 1.885 inch.. Part Number2-3-10431X N2-3-10431X. ApplicationCompatible with Muncie 4L80E. Compatible with GM 400 TH400. Compatible with Borg Warner Super T10. Outstanding After-SalesIf you are dissatisfied with your purchase for any reason, you can contact us through your order, we are always there.

Part Number2-3-6081X CA2-3-6081X 83503574. ApplicationCompatible with GM 350 TH350 700R4. ApplicationCompatible with Jeep Grand Cherokee 4WD RWD. Outstanding After-SalesIf you are dissatisfied with your purchase for any reason, you can contact us through your order, we are always there.

Compatibility compatible with GM TH, compatible with Turbo Hydromatic, compatible with Turbo 350, compatible with Powerglide, compatible with 700R 700R4 4L60 4L60E, compatible with Saginaw 3 Speed, compatible with Saginaw 4 Speed, compatible with Muncie 4 Speed, compatible with Borg Warner T-4 T-5 T-10.. Part Number 2-3-6081X, 5-153X, 5153X, 236081X.. Package Include 1 set transmission slip yoke 1310 Series with U-joint kit as the first picture shows.. Specification of Yoke Bearing Cap Diameter 1.062'', Slip Yoke Length 5.469'' Center Line to End of Spline, Hub Diameter 1.5''.. Fitment Type Direct replacement..

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

This 5-12 stock length slip yoke is a great replacement for stock yokes that are worn or damaged. Fits the common GM 1-316 x 27 splined output shafts found on GM 3 and 4 speed manual, TH350, Powerglide, 700R4, 4L60, and 200-4R transmissions. Stock length has 3 34 of slip length. Also fits Bert, Brinn, and Falcon transmissions. Uses 1310 U-joint with external snap rings which is very common and easy to find conversion U-joints if needed.

Extended Travel Design Longer 6-34 inch slip yoke provides added slip length for vehicles with extreme rear suspension travel or slightly short driveshafts.. Broad GM Transmission Compatibility Fits GM 1-316 inch x 27-spline output shafts on TH350, Powerglide, 700R4, 4L60, 200-4R, Muncie M20M21, Saginaw, Borg Warner T-5T-10T-56 and more.. 1310 Series U-Joint Fitment Works with standard 1310 U-joints and includes outside retaining clips for secure installation.. Durable Forged Steel Construction Heat-treated forged steel yoke delivers strength and reliability for street or performance applications.. Precision Slip Length Features 4-34 inches of machined slip area note that stock transmissions may require output shaft modification for full yoke travel..

This 8 slip yoke helps compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Fits the common GM 1-316 x 27 splined output shafts found on GM 3 and 4 speed manual, TH350, Powerglide, 700R4, 4L60, and 200-4R transmissions. Extra long length has 6 of slip length - note stock transmissions will need the output shaft modified in order for the entire slip length to be inserted. Commonly used for Modifieds, Sport Mods, and Late Models with Bert, Brinn, and Falcon transmissions. Includes greaseable 1310 U-joint with external snap rings.

Extreme Travel Compensation This 8 slip yoke is designed to help compensate for extreme travel rear suspension setups or driveshaft lengths that are slightly shorter than needed, ensuring optimal performance under challenging conditions.. Wide Compatibility Fits the common GM 1-316 x 27 splined output shafts found on a range of GM 3 and 4-speed manual, TH350, Powerglide, 700R4, 4L60, and 200-4R transmissions, making it a versatile choice for various applications.. Extra-Long Length With 6 of slip length, this slip yoke can accommodate modifications and setups that demand additional length. Please note that stock transmissions will need the output shaft modified to fully insert the slip length.. Perfect for Racing Setups Commonly used for Modifieds, Sport Mods, and Late Models with Bert, Brinn, and Falcon transmissions, this yoke is a preferred choice among racing enthusiasts and professionals.. Easy-to-Find U-Joints Uses 1310 U-joint with external snap rings, a very common design that makes finding conversion U-joints, if needed, straightforward and hassle-free..

Recommended replacement part for your GM vehicles original factory component. Offering the quality, reliability, and durability. Manufactured to GM OE specification for fit, form, and function. Made in Mexico.

Fitment Replacement for GM TH, Replacement for Powerglide, Replacement for 700R 700R4 4L60 4L60E, Replacement for S aginaw 3 Speed, Replacement for Saginaw 4 Speed, Replacement for Muncie 4 Speed, Replacement for Borg Warner T-4 T-5 T-10. Product Specifications Replaces 2-3-6081X, 5-153X, featuring 2627 spline, a slip yoke length of 5.469 inches, an outside yoke dimension of 3.469 inches, and a bearing cap diameter of 1.062 inches, meeting various installation requirements. U-Joint Components Equipped with U-joint connection components to ensure efficient power transmission between the drive shaft and gearbox, reducing vibration and wear, and improving driving stability and smoothness. Precision Engineering Manufacturing Utilizes precision machining technology to ensure a tight fit between the slip yoke and the transmission shaft, effectively preventing oil leakage and loosening, thus extending the service life of the transmission system. Ready-to-Use Design After rigorous testing, all components meet specifications, requiring no additional modifications, allowing for direct installation and use, saving maintenance time and quickly restoring vehicle performance.

Designed, engineered, tested, and warranted for GM vehicles. Precise fit for ease of installation. For proper installation, locate your nearest GM dealer, independent service center, or body shop.

Precise fit for ease of installation. For proper installation, locate your nearest GM dealer, independent service center, or body shop. All Products Have Been Designed With The Professional In Mind. Fully Equipped With State-Of-The-Art Technology.

Fit Type Vehicle Specific. Package Dimensions 7.62 H x 24.13 L x 10.16 W centimetres. Package Weight 2.55 pounds. Country of Origin Taiwan.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle.

97-06 Tj Wrangler87-95 Yj Wrangler87-01 Xj Cherokee87-92 Mj Comanche Slip Yoke Eliminator Kit, Transfer Case Slip Yoke Eliminators Components.

Package Dimensions 19.812 L x 9.652 W x 9.398 H centimeters. Genuine OE replacement. Package Weight 1.35 pounds. Made in United States.

Package Dimensions 8.2 L x 12.1 W x 23.7 H centimeters. Genuine OE replacement. Package Weight 1.108 kilograms. Made in Mexico.

Spicer genuine replacement. 1330 Series. Spline Count 2728 I. Engineered for performance. Confirm this fits your vehicle year, make and model using the Amazon Confirmed Fit bar at the top of this page.

Product Type Auto Part. Package Quantity 1. Package Weight 2.4 lbs. Country Of Origin United States.

Spicer genuine OE replacement. Pinion yoke - 1310 U-Bolt style. American motors eagle 1987-80 Chevrolet blazer 1974-69, c10 panel 1967, c10 pickup 1968-67, c10 suburban 1980-60, c20 suburban 1980-60, Camaro 1994-84, g10 van 1972-64, k10 1980-75, k10 pickup 1974-60, k10 suburban 1980-60 more.

Part Number 3-3-01646X. Country Of Origin United States. Package Dimensions 24.637 L X 11.938 W X 8.382 H Centimeters. Package Weight 4.4 Pounds.

Product TypeAuto Part. Item Package Dimension9.25 L X 4.75 W X 3.25 H. Item Package Weight3.88 lbs. Country Of Origin United States. Spicer genuine OE replacement. 1410 series.

Package Dimensions 29.21 L x 10.16 W x 9.652 H centimeters. Genuine OE replacement. Package Weight 3.75 pounds. Made in Mexico.

1410 series. Package Weight 4.5 pounds. Package Dimensions 23.876 L x 7.111 H x 12.446 W centimeters. Genuine OE replacement.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - components in this transfer case slip yoke eliminator kit are designed to convert an original equipment slip yoke into a fixed yoke on specified vehicles. Ideal solution -engineered to accommodate changes in suspension height and driveline length. Durable construction - the components in this kit are made of quality materials for reliable performance and long service life. Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Direct replacement - this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles. Effective fix - replacement restores safe, smooth driveline operation. Rigorously tested - designed and evaluated to assure safe, reliable operation. Trustworthy quality - backed by team of engineers and inspectors in the United States. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Designed, engineered, tested, and warranted for GM vehicles. Precise fit for ease of installation. For proper installation, locate your nearest GM dealer, independent service center, or body shop.

Precise fit for ease of installation. For proper installation, locate your nearest GM dealer, independent service center, or body shop. International Renown For Our Diverse Range Of Award-Winning Products. Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User.

Designed, engineered, tested, and warranted for GM vehicles. Precise fit for ease of installation. For proper installation, locate your nearest GM dealer, independent service center, or body shop.

package height 8.382 cm. package length 12.192 cm. package width 24.13 cm. Product type AUTO PART.

package height 8.128 cm. package length 23.622 cm. package width 12.192 cm. Country of Origin United States.

OEPart Number2-3-12051X, 1330 Series Driveshaft Slip Yoke. Fitment1330 Series Universal Joint, 5-213X, 5-1330X, U-Joint Cap Diameter 1.062, U-Joint Width3.625. Fitmentfor Various 27 Spline GM transmission Output Shafts IncludingTurbo 350, TH-350, T56, T375, T-5, T-10, Saginaw, Powerglide, M21, M20, 700R4, 4L65E, 4L60E, 200-R4. Specification Universal Joint Width L 3.625'', Bearing Cap Diameter D 1.062'', Center Line to End of Spline J 6.76'', Hub Diameter R 1.5'', Spline Outside Diameter 1.176'', Number of Spline 26 Based on 27 Spline. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding..

OEPart Number 3-3-2431X, T3-3-2431CBHP. Fitment1350 Series U-Joint, 5-178X, 5-1350X, U-Joint Cap Diameter 1.188, U-Joint Width3.625. Fitment GM Turbo 400,TH400 Transmission, 4L80E, Muncie M21 M22, Borg Warner Super T10. Specification Outside Yoke Dimension L 3.625'' Bearing Cap Diameter D 1.188'' Center Line to End of Spline J 5.5'' Hub Diameter R 1.885'' Spline Outside Diameter 1.378'' Number of Spline 31 Based on 32 Spline. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding..

OEPart Number3-3-6081X, T3-3-6081HP, N3R-3-6081X. Fitment1350 Series Universal Joint, 5-178X, 5-1350X, U-Joint Cap Diameter 1.188, U-Joint Width3.625. FitmentTurbo 350, TH350, T375, 200-R4, 700R4, 4L65E, 4L60E Borg Warner T-5, T-10, T-56 Saginaw Muncie M20, M21, M22 GM 3R Series 27 spline Powerglide. Specification Universal Joint Width L 3.625'' Bearing Cap Diameter D 1.188'' Center Line to End of Spline J 5.5'' Hub Diameter R 1.5'' Spline Outside Diameter 1.18'' Number of Spline 26 Based on 27 Spline. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding..

OEPart Number2-3-5981X. Fitment1330 Series U-Joint 5-213XOSR, U-Joint Cap Diameter 1.062, U-Joint Width3.625. Fitment for Ford C-4 T5 T10 AOD,Top Loader and Tremec TR3550. Specification Outside Yoke Dimension L 3.625'' Bearing Cap Diameter D 1.062'' Center Line to End of Spline J 5.906'' Hub Diameter R 1.500'' Spline Outside Diameter 1.22'' Number of Spline 27 Based on 28 Spline. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding..

OEPart Number 2-3-8251X, 1310 Series Transmission Slip Yoke. Fitment1310 Series U-Joint, Cap Diameter 1.062, Width 3.219. U joint Reference Numbers 5-153X 5-1310X 5-1310-1X. Fitment for Ford 1310 Series Drive Lines Used on C-4 T-5 AOD Top Loader and Tremec 3550 Transmissions Starting from 1965-1995.. SpecificationUniversal Joint Width L 3.625'', Bearing Cap Diameter D 1.062'', Center Line to End of Spline J 6.5'',Hub Diameter R 1.5'', Spline Outside Diameter 1.220'', Number of Spline 27 Based on 28 Spline. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding..

OEPart Number2-3-6041X, N2-3-6041X, T2-3-6041HP. Fitment1330 Series U-Joint, U-Joint Cap Diameter 1.062, U-Joint Width3.625. Fitment for various 31 spline Ford, Lincoln, Mercury transmission cases including C6, E4OD, T45, T56, T56 Magnum, FMX, Top Loader, TKO-500, TKO-600 and some Transfer cases.. SpecificationUniversal Joint Width L 3.625'' Bearing Cap Diameter D 1.062'' Center Line to End of Spline J 6'' Hub Diameter R 1.685'' Spline Outside Diameter 1.39'' Number of Spline 30 Based on 31 Spline. IMPORTANT The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding..

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment OE. GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle. GM regularly updates production and service part designs to integrate new materials and technologies.

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment OE. GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle. GM regularly updates production and service part designs to integrate new materials and technologies.

Package Dimensions 24.13 L x 12.192 W x 8.382 H centimeters. Genuine OE replacement. Package Weight 3.3 pounds. Made in Mexico.

package height 9.652 cm. package length 30.226 cm. package width 14.732 cm. Country of Origin United States.

Spicer genuine OE replacement. Spicer genuine oe replacement. Product type AUTO PART.

Package deal includes one Jeep 231 J Heavy Duty Slip Yoke Eliminator Kit SYE Kit part number 52231 and one 16.5 driveshaft to fit all 97-06 Jeep TJ Wranglers with Dana 35 and Dana 44 rear axles with 1310 series yokes.will not fit Rubicon or TJ Unlimited models. Part Number 52231 Rugged Ridge Part Number Interchange 18676.60. PORC165SPICVSHAFT.

Meets Or Exceeds OEM Specs. Factory OEM Fit Form And Function.

Replace Part Number 2-3-6081X. Fits for 1310 Series U-Joint.. Number of Spline 26 Based on 27. Heavy duty steel material for premium durability and performance.. Fits for GM TH Turbo Hydromatic Turbo 350 Powerglide 700R 700R4 4L60 4L60E Saginaw 3 Speed Saginaw 4 Speed, Muncie 4 Speed Borg Warner T-4, T-5 and T-10..

Steel. Slip yoke. Shortens output shaft 3 inches. Reduces drive Line angle. Limited 5 year warranty.

100 Fitment Guaranteed . Made With Heavy-Duty 4340 Chromoly Steel. 716 Forks And 1-58 Neck. Fits Oem And Rhino Driveline Prop Shaft. Maximized Dimensions For Ultimate Strength .