FAST AND EASY INSTALL SharkBite Max push-to-connect brass pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools pipe connector can be installed in wet lines. NO PEX TUBE LINER With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on CopperCPVC. STRONG AND DURABLE Straight coupling features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force. LEAD FREE Straight coupler is made of high-quality forged DZR brass with reinforced stainless steel that is lead free all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications. CERTIFIED Water service coupling is rated to 200 degrees F and 400 PSI with 2K maximum burst.

APPROVED TO USE Certified and listed to ASSE 1061, NSFANSI 61 Meet UPC, CUPC requirements. Lead Free brass are safe for drinking water and hydronic heating water distribution.. EASY INSTALLATION Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms Just push and lock the pipe to get the seamless performance.. VERSATILE APPLICATIONS Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.. LONG LASTING Made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 F and 200 PSI and long period of wear and tear.. BUNDLE INCLUDES 12 Inch Straight Coupling 4 PCS 12 Inch Disconnect Clip 1 PC..

EASY INSTALLATION NO SOLDERING No soldering, clamps or glue required, just insert the pipe into the fitting deep enough by hands. Disconnect in seconds by using the Disconnect Clip. SUNGATOR pushfit ball valves are removable and reusable. They can even be rotated after assembly for easier installation in tight spaces.. PROFESSIONAL AND SAFE Certified Compliant cUPC, ANSINSF-61, NSF-372, NSF-14, ASSE1061. SUNGATOR push fit fittings can withstand up to 200 PSI and 200F.. LEAD FREE BRASS High quality lead free brass for corrosion resistance, high temperature ductility, not easy to be broken, healthy and safe. Push-to-Connect plumbing PEX fittings can be used in Potable Water and Hydronic Heating Applications.. APPLICABLE MATERIAL The easiest and fastest push-fit plumbling fittings to join copper, CPVC, PE-RT or PEX pipe. Suitable for use inside or outside the wall.. PACKAGE INCLUDES Pushfit 34 Inch Ball Valve 2 PCS 34 Inch Disconnect Clip 1 PC..

XFITTING PUSH FIT easiest and fastest way to join copper, CPVC or PEX pipe in any combination.

Efficient Deburring Tool This pipe reamer quickly removes burrs from both the inside and outside of copper, PVC, and plastic pipes, ensuring smooth pipe ends and better sealing for reliable joints.. Durable Alloy Blades This copper and stainless steel tubing reamer is built with sharp and wear-resistant alloy blades that deliver long-lasting performance stronger and more stable than plastic-based tools.. Wide Pipe Compatibility Plumbing Tools suitable for pipes with outer diameters ranging from 14 inch to 1-38 inch, making it ideal for plumbing, HVAC, and DIY applications.. Comfortable Grip Safety The deburring tool for copperPVC pipe sturdy alloy body that resists deformation during operation, providing a solid feel in hand, safer handling, and faster burr removal.. Compact Portable Design With a lightweight and space-saving size, this deburring tool fits easily in any toolbox convenient for plumbers, HVAC technicians, and home users..

CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 12 in., 34 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe. CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar. Compact design with wide grip handles. One-handed operation. Quick and easy disassembly. To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations. The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.

High Quality Material34 push to connect coupling fittings are made of lead free DZR forged brass,certified compliant CUPC,ANSINSF-61,NSF-372,NSF-14,ASSE1061.They are durable,high-strength and anti-corrosion.. Installs in SecondsNo tools,no soldering,no crimping or glue.Just insert the pipe and the stainless-steel teeth bite down and grip tight,while a specially formulated O-ring compresses to create a perfect seal.Push fit fittings can even be rotated after assembly for easier installation in tight spaces.. Widely ApplicationThe push-fit coupling meets the same standards for commercial and residential plumbing applications,rated to 200F and 200 PSI.It can be used in potable water and hydronic heating applications.. Connection TypeGUOFIS pushfit straight coupling fittings are suitable for use inside or outside wall,that fit copper,CPVC,PE-RT and PEX pipe,and they can connect all types in any combination.. Package IncludeThere are 10 pack 34 inch push-to-connect coupling fittings and 1pack disconnect clip tool in the package.Designed to be used underground and behind walls without access panels..

Directly from One of the Biggest Plumbing Systems Manufacturers. 12 Inch Push-Fit Full Port Ball Valve Hot and Cold 5 PCS Each with 2 Disconnect Clip Tool. Fit Copper, Pex, CPVC and PE-RT Pipe. Lead Free DZR Forged Brass. 201 PSI and 200 Degrees F. Use in Potable Water and Hydronic Heating Applications.. No Tools, No Soldering, No Crimping or Glue. Push to Connect. O-Ring for Leak Free Seals. Free 2 Keys for Dismantle the Connection, and Reuse the Fittings.

Directly from One of the Biggest Pex Systems Manufacturers. 10 Pieces 12 Inch Pex Brass Full Port Shut-off Ball Valve Hot and Cold Red and Blue Handle. Certified with ASTM F1807 NSFANSI 61. Resistant to Corrosion Due to DZR Brass. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Compatible with all types and brands of Pex Tubing.

12-in-1 Professional Plumbing Kit Unlock Effortless Push-Fit ConnectionsEverything you need to install Push-fit Fittings faster, easier, and leak-free This pro-grade kit eliminates guesswork perfect for DIYers and professional plumbers demanding precision. No more leaks, just perfect seals every time. 6-in-1 Depth Gauge Deburring ToolSix Sizes in One Tool 14, 38, 12, 58, 34,1.Works with all major Push-fit Fitting brands. The insertion depth mark gives instant visual confirmation never risk leaks from under-inserted pipes again Plus Rotate to remove outer burrs that damage O-rings in the Push-fit Fitting.. 5 Pcs Push-Fit Fitting Removal ToolsComplete Size Coverage 14, 38, 12, 34, 1.Premium odorless plastic clips sturdy yet lightweight. Simply slide the clip, push, and release No extra tools needed. Carry anywhere solve any disconnection job in seconds.. Pro Deburring Tool KitEnd Burr Problems ForeverRed ergonomic metal handle anti-slip grip 5 sharp HSS blades. Remove inner pipe burrs in seconds stop flow restrictions, turbulence, pinhole leaks, and noisy pipes. Universal Plumbing SolutionConquer Any Pipe ChallengeWorks flawlessly on Copper, PVC, PEX, PPR, CPVC pipes of all sizes. Your all-in-one arsenal for home repairs, HVAC jobs, or workshop maintenance. Build like a pro.

Smooth Pipe Removal Tackle broken or damaged pipes effortlessly with our high-quality pipe extractor set.Designed for use with both schedule 40 and schedule 80 pipes, this set simplifies pipe repair tasks for everyone from DIYers to professional plumbers.. Comprehensive Size Range This 6-piece kit includes extractors for commonly used pipe sizes ranging from 18 to 1, including 18 14 38 12 34 1 National Standard Pipes, for very tight spaces, making it versatile for a wide array of pipe repair needs.. Built to Last Constructed from premium-grade steel, these extractors are designed for durability and can handle challenging extraction jobs, ensuring theyll be a part of your toolkit whenever you need it.. Easy-to-Read Markings Each extractor is labeled with its size and the bit size, and sizes also molded on the case beside each extractor, taking the guesswork out of pipe repair and making the job quicker and more efficient, as well as convenient storage.. Organized Storage Solution The set comes with a rugged, compact storage case, keeping your tools safe, secure, and easy to transport. Stay organized and never lose a piece again..

Satisfy Your Use Needs includes a manual pipe cutter, 12 inches long, can cut most kinds of pipe, PE pipe PVC PPR and other plastic pipe, to help you cut pipes efficiently and bring you many ways, Please note that due to the relatively hard pressure pipes, it may be rather laborious. Size suitable for 1-78 to 4-1250-120mm outer diameter of pipe, 12 inch long, please confirm the size before purchase. Trustworthy Material tubing cutter for plastic pipe is made of steel and aluminum, with sharp knife wheel, to achieve smooth, clean, straight line cutting, high hardness, can serve you for a long time. Practical Cutting Tool the screw at the bottom of this pipe cutter acts as a lock to ensure that the tool remains stable during use Can prevent accidental sliding or movement, fast cutting, can effectively improve your work efficiency. Versatile Usage handle a variety of PVC or plastic cutting from the inside where other ordinary pipe cutting tools cannot cut, and is the ideal tool for cutting different hoses and tubes Whether you work on plumbing, irrigation or automotive projects.

FAST AND EASY INSTALL SharkBite Max push-to-connect brass push slip ball valves are perfect for making quick transitions between a copper and CPVC pipe only. No need for soldering, glue, or additional tools pipe connector can be installed in wet lines. NO PEX TUBE LINER With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on CopperCPVC. STRONG AND DURABLE The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force good item to keep on hand for freezes or other emergency repairs. LEAD FREE This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications. CERTIFIED Slip ball valves are rated to 200 degrees F and 250 PSI with 2K maximum burst.

Package contents there are 5 disconnect clips in 5 size, including 14 inch, 38 inch, 12 inch, 34 inch and 1 inch, each size contains 1 piece Using them, you can remove the push-fit fitting in the simplest and fastest way possible. Material these clips are made of quality plastic, sturdy and light, with no strange smell, easy to store and carry, you won't feel any burden while using them Besides, these disconnect clips are resuable, and can serve you for a long time. Effortless to install you just need to put a disconnect clip on the side of the push-fit fitting and gently push it, then the push-fit fitting can be removed easily, no other tools are needed in this process. Different size package contains 5 different sizes, you can choose the matching one according to the size of the push-fit fitting, our clips are enough to meet your different needs, so you don't require disconnect clips of other sizes. Gift choice you can buy these clips and give them to your family and friends who need them These little items can do a great job, and the people who use them can remove the tubes in the fastest way.

2 Pieces Push-Fit Ball Valve in Size 12 Inch Hot and Cold with a Disconnect Clip. Potable Water and Hydronic Applications Connects Pex, CPVC and Copper Pipe. Lead Free DZR Forged Brass. Quick Installation without Tool. O-Ring for Leak Free Seals.

SHARKBITE PRO PUSH-TO-CONNECT DISCONNECT TOOL This SharkBite pro disconnect tool allows for brass plumbing fittings to be disconnected from the pipe quickly and easily can remove or adjust push-to-connect fittings in tight spaces for easy disassembly. EASY TO USE This handy disconnect tool can remove any type of fitting from 38 inch to 1 inch does not require any installation or interchangeable faceplates to allow for comfortable and convenient use. DURABLE AND HIGH QUALITY Pex ring removal tool features comfortable rubber grips and is constructed with heavy-duty handle springs for optimal durability. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

Package Includes 1 x brass full port shut-off ball valve red handle, 1 brass full port shut-off ball valve blue handle. 1 x disconnect clip.. Easy Installation The ball valve features a hassle-free direct push-in installation, making it quick and easy to connect.. Range The valve is engineered to withstand high pressures and elevated temperatures. With the maximum pressure of 200 PSI and the maximum temperatures of up to 200 degrees Fahrenheit.. High Quality Made of premium quality, lead-free brass, delivering superior corrosion resistance and outstanding durability.. Multi-function Use Suitable for aluminum plastic pipe, PVC, CPVC, PE PVC, copper pipes, in line with commercial and house use standards..

Designed to remove copper crimp rings from PEX connection. The easy dial setting adjusts for 12,34 and 1 copper crimp ring sizes. Built-in gap and cylinder jaw prevent damage to the barb of the insert fitting. Constructed of sturdy steel with rust prevention, probides durability and a long service life. For use on copper crimp rings only.

8-in-1 Multifunctional Design for Versatile Plumbing Tasks This all-in-one multi-functional sink wrench tackles 8 common plumbing needs supply nuts, shut-off valves, strainer baskets, faucet nuts, and more. It fits most 2346-tab basin nuts, making it ideal for installing or repairing faucets, sinks, toilets, water heaters, and even muralshelf setupsno need for multiple tools.. Ergonomic Design for Tight Spaces Hard-to-Reach Areas The extra-long body and open-slot style let you access nuts around existing supply lines without disassembly. Its anti-slip grip texture maximizes hand power, while the tail rod allows easy rotation in awkward anglesperfect for narrow corners under sinks or behind toilets.. Durable Lightweight Construction Made of high-strength ABS engineering plastic and aluminum alloy, this sink wrench is lightweight yet sturdy enough for daily use max force 500N. The 2 replaceable heads 34mm 40mm are easy to disassemble and clean, ensuring long-term reliability without scratching chrome surfaces.. Gentle on Surfaces, Tough on Tasks Unlike metal wrenches that scratch chrome fixtures or damage delicate pipes, this sink wrenchs plastic and aluminum alloy construction is designed to protect surfaces. It tightens and loosens nuts firmly without marring finishesperfect for preserving the look of your kitchen, bathroom, or toilet fixtures while getting the job done.. User-Friendly for Homeowners DIYers No professional skills needed Simply snap into position and rotatesimpler than traditional wrenches. Whether youre fixing a leaky faucet, installing a sink, or mounting shelves, this multi-functional sink wrench makes home plumbing tasks quick and hassle-free..

Depth Diameter Gauge Tool This pipe deburring pipe and depth gauge tool has 6 sizes 14, 38, 12, 58, 34, 1. Removal tool Fits push to connect fittings and valves. Easy to measure insertion depth after the pipe is inserted. It can also be applied to measure the outside diameter of water pipes, for sizes 12 inch and 34 inch. Dual purpose tools It's not only can be served as a measuring tool to measure the depth and outside diameter of the pipe, but also can help you to quickly remove push in fittings without the need for additional tools. One tool for your measuring and removal job. It is an essential cutting and fixed tool for home handymen and plumbers. Effortless to use Easy to use, when measuring, only need to put the water pipe into the hole to complete When needing to remove the Push to Connect fittings, only need to put the water pipe into the outside diameter measurement hole, gently push it, then the push to connect fitting can be removed easily. Durable Material These depth gauge tool is made of quality plastic, sturdy and light, with no strange smell, easy to store and carry, and you won't feel any burden while using them Besides, this pvc piper reamer is reusable and can serve you for a long time. Practical Tool Kit Our tool set kit includes a depth measurement tool. Highly compatible with any combination of copper, PEX, CPVC, and PERT piping, easy to remove and replace, suitable for all types and sizes of piping, can be applied for domestic, plumbing applications or applied as a mechanic's tool in the workshops.

SHARKBITE EXPANSION BALL VALVE Expansion ball valves are perfect for helping to control water flow and enabling water supply shut off for servicing and making repairs. PEX-A systems can handle higher pressure and temperature variations Requires PEX expansion tool and expansion rings to make connection. COMPATIBILITY Expansion ball valve is compatible with PEX-A pipes only suitable for domestic hot and cold water service lines, burial applications including concrete, and radiant heating systems. NOT Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. DURABLE PEX-A expansion fittings are made from lead-free DZR brass for long-lasting reliability feature an elastic memory that provides flexibility and protects against kinking and corrosion expansion fittings form connections that grow stronger over time. EASY TO INSTALL Expansion Fittings allow for quick and easy installation with expansion ring and PEX tubing. Use expansion tool to insert and hold fitting in place until the expansion ring and tube contracts tightly to ensure proper and quick installation No solder or bonding agents required. CERTIFIED This ball valve meets ASTM F-1960 and ASTM F-877 standards for product safety. Expansion manifolds are compatible with all PEX-A tubing of the same size from any manufacturer.

SHARKBITE REMOVAL TOOL 34 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily can remove or adjust push to connect fittings in tight spaces for easy disassembly. COPPER, PEX, CPVC, CTS, HDPE SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces. DURABLE AND HIGH QUALITY Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust SharkBite's quality and performance are field-proven and trusted in the plumbing industry. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

All In One Size Compatibility Combines 12, 34, and 1 capability into one push to connect removal tool, eliminating the need for multiple tools. This push-fit disconnect plier tool works seamlessly with push to connect fittings 12 inch and larger sizes, making it ideal for plumbing repairs, pipe replacement, and maintenance tasks in tight spaces. Fast And Damage Free Removal Designed as a precision push fit disconnect tool, this disconnect pliers for removing brass push-in fittings allows smooth release without damaging pipes or fittings. Use as a push to connect fittings disconnect tool or push to connect disconnect tong tool for efficient removal quick connect operations in residential or commercial plumbing. Wide Pipe Material Compatibility Engineered as a universal pex disconnect tool, compatible with PEX, copper, and CPVC systems. This plumbing fitting tools solution doubles as pipe fitting tools and supports 12 34 1 inch water pipe installation and removal tools, making it a must-have for plumbers and DIY users handling diverse piping systems. Ergonomic And Heavy Duty Grip Built as durable push fit plumbing disconnect pliers with anti-slip handles, delivering strong leverage with minimal effort. Functions as clamp disconnect pliers, quick coupler pliers, and connecting clamp tool, ensuring comfortable one-handed use even in confined or behind-wall installations. Multi Scenario Professional Tool This push to connect removal tool set works as air line removal tool, push to connect removal tool and disconnect tongs tool for multiple applications. Ideal as push-fit disconnect tong tool push to connect removal tool and push to connect removal tool disconnect tongs, perfect for plumbing repair, HVAC systems, and automotive quick connect fittings.

Heavy-duty die-cast aluminum frosted material, durable lightweight and won't scratch the bathtub surface. Fit most 1-38 and 1-12 bathtub drains, suitable for installing and removingtub drains and spuds. Double-ended tub drain remover tool works better when combined with an adjustable wrench or screwdriver. Please check the product dimensions when purchasing, the one end's diameter is 1.35 ''3.2cmwork teeth depth is 0.240.6cm and one end's diameter is 1.42''3.6cm and 1.75''4.5cmwork teeth depth is 0.320.8cm. Any question, Please contact us..

Package Includes10 Pack of 34x12 couplings with disconnect clip for easy removal. Perfect for profession plumber and DIY users, providing everything needed for seamless installation and maintenance.. High-quality Brass Superior long-lasting and corrosion resistance. Designed to withstand up to 200F and 200 PSI, these fittings provide sturdy performance for your plumbing needs, preventing leaks and wear over time.. Fast Installation No soldering, crimping, or gluing required. Just push the pipe into the fitting, and it securely locks in place, reducing installation time and errors. Ideal for both professionals and DIYers.. Leak-proof Ensure a secure, watertight seal that prevents leaks. The high-strength material resists corrosion, scratches, and temperature changes, ensuring optimal performance in any plumbing system.. Widely UsedMeets the standards for drinking water.Ideal for contractors and DIYers tackling potable water lines, heating systems, or industrial plumbing challenges..

XFITTING Push Fit Removing Clip Compatible with all types and brands, Sharkbite, Cash Acme, Ect.. High Quality Disconnect Clips are Made of High Quality Plastic, Sturdy and Light, Easy to Store and Carry. Size 38, 12, 34 and 1. Color Orange.

SHARKBITE CRIMP RING REMOVAL TOOL This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused has 200 lbs of crimping force and features a 6 inch handle. COMPATIBILITY This plumbing disconnect tool works with 12 inch, 34 inch, and 1 inch copper crimp rings. EASY TO USE This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

SHARKBITE FROST FREE SILLCOCK Outside faucet valve features an integrated 12 inch push-fit inlet and 34 inch garden hose outlet a shut-off can be found at the inlet of the sillcock to drain the water and provide protection for the valve when freezing. VERSATILE Push-to-connect sillcocks work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes ideal for working in tight spaces. EASY TO INSTALL This intuitive SharkBite brass push frost-free sillcock allows for quick and easy installation, with no tools, crimping, glue, or soldering required can be installed in wet lines remove using a disconnect clip or disconnect tongs. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications approved for behind-the-wall applications with no access panels. SECURED The SharkBite frost-free sillcock features an integrated vacuum breaker to prevent backflow and a mounting flange to secure the valve.

Efficient Disconnection Easily remove push-to-connect fittings with the Disconnect Tong Tool for 12in, 34in, and 1in sizes. Slide over the fitting, squeeze to release, and pull pipe free without damaging brass or connections. Compact Versatile Push to connect fittings disconnect tong tool is ideal for one-handed operation in tight spaces, behind walls, or underground. Works with hydronic heating and potable water systems using copper, PEX, and CPVC pipes. Multi-Size Design This disconnect pliers tool combines 12, 34, and 1 tongs into a single compact tool. Quickly remove brass push-in connections from pipes, reducing the need for multiple tools and improving efficiency. Universal Application Disconnect tong tool works with copper, PEX, and CPVC pipes, making it the perfect air hose connector removal tool for professionals and DIY enthusiasts alike. Compatible with all common push-to-connect fittings. Perfect for Tight Spaces Designed to reach areas where traditional tools cant, this push to connect fittings disconnect tong tool allows precise removal in cramped spots, ensuring easy disconnection and smooth repairs.

3-in-1 Universal CompatibilityMaster your pneumatic repairs with one versatile tool. This 2-in-1 angled head design is perfectly compatible with 14 and 516 6mm and 8mm or 38 and 12 10mm, 12mm push-to-connect fittings. Whether you're working with PEX, CPVC or copper pipes, this all-around assistant works seamlessly across various quick-connect brands.. Slim Jaw for Cramped SpacesStop struggling in tight spots The innovative slim-profile jaws are precision-engineered to reach into densely packed equipment or narrow vehicle chassis. It accurately depresses the release collar without causing the hose deformation or connector damage typically caused by manual pulling or using improper tools.. One-Handed Labor-Saving OperationProtect your fingertips from the pain of stiff, frozen connectors. Featuring an ergonomic spring-loaded lever, this tool allows for effortless one-handed release. Simply clamp the air line and press the lever with your thumbthe built-in mechanism automatically pushes the fitting out safely and efficiently.. Industrial Grade Carbon SteelBuilt for professional shop environments, the core components are forged from heat-treated carbon steel for maximum strength and durability. The handles are wrapped in soft PP TPR non-slip materials, providing a comfortable, secure grip that reduces hand fatigue during long hours of maintenance.. Safe Storage Compact PortabilityDesigned for the modern toolbox, this tool features a integrated safety lock for compact storage. Its lightweight and durable design makes it an essential addition to any mechanics bag or home emergency kit, ensuring you always have the right tool to quickly disconnect pneumatic lines on the go..

Widely Applicable Highly compatible with any combination of copper, PEX, CPVC, and PERT piping, easy to remove and replace, suitable for all types and sizes of piping, can be applied for domestic, plumbing applications or applied as a mechanic's tool in the workshops. 6 in 1 Tool This depth gauge tool has 6 sizes 14, 38, 12, 58, 34, 1. Function Removal tool Fits push to connect fittings and valves. Easy to measure insertion depth after the pipe is inserted. It can also be applied to measure the outside diameter of water pipes, for sizes 12 inch and 34 inch. Multifunctional Practical It's not only can be served as a measuring tool to measure the depth and outside diameter of the pipe, but also can help you to quickly remove push in fittings without the need for additional tools. It is an essential cutting and fixed tool for home handymen and plumbers. Built to strict quality control standards. Package includes 1 x Pipe Depth Gauge Tool as pictured. If you encounter any problems with our product, please dont hesitate to reach out to us.

Hose Remover Pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners, etc.. Remove Fuel, Vacuum or Heater Hoses from 0.16to 0.594mm to 15mm diameter. Designed to facilitate quick and easy access into tight areas. A quicker and more effective method of removal than other traditional options. Compatible with a variety of difficult disassembly pipes such as trachea, power assisted tubing, heat radiating oil pipe, water pipe, etc..

Functional Use The Pipe Remover Kit is used to easily remove broken, solid, rusted bolts from plumbing, remove brass from shower pipes, pull out cracked pipes, bathtub spout fittings and more.. Reverse groove design Reverse groove design can firmly catch the bolts in the main pipeline, with high biting force, it is not easy to slip when removing the firm pipes.. Wide Adaptation Adjustable from 12-inch to 1-inch diameter pipes, can effectively remove the bolts in different sizes of pipes, wide range of adaptability.. High Quality Material The Pipe Extractor Kit is made of heat-treated alloy steel, which prevents deformation and works reliably under harsh conditions to ensure durability.. Easy to use Hexagonal hole design at the end, can be used with ratchet wrench, multi-function wrench or hand wrench, can easily remove broken pipe threads, water pipe fittings, etc..

APPROVED TO USE SUNGATOR 12 shut off valves are certified and listed to ASSE 1061, NSFANSI 61 SUNGATOR push pex fittings all meet UPC, cUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.. EASY INSTALLATION Complete installs faster and safer than traditional methods with SUNGATOR push shut off valves and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms Just push and lock the pipe to get the seamless performance.. VERSATILE APPLICATIONS Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR water shut off valves are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.. LONG LASTING SUNGATOR pushfit plumbing fittings are made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 F and 200 PSI and long period of wear and tear.. PACKAGE INCLUDES Pushfit Straight Shut Off Valve 12 Inch x 38 Compression 12 PCS 12 Inch Disconnect Clip 1 PC..

MGYOO PEX Clamps - Pex crimp rings set includes 200 pack 58 PEX cinch clamps, fit for 58 inch PEX pipe.. Enhanced Design - These single ear hose clamps are easier, stronger and faster to install than screw type clamps. The special lug design provides strong compensation for thermal expansion, allowing the hose to remain sealed regardless of hose size changes. Premium Material - Crafted from 304 heavy-duty stainless steel, these PEX crimp rings are resistant to salt, rust, and corrosion, ensuring long-lasting durability and performance.Pex crimp rings are durable and long-lasting, withstanding harsh conditions without rusting or breaking. Pex crimp rings have smooth edges to prevent damage to the pipe. 360Seal Protection - Pex clamps feature an interlocking ring with an infinitely variable 360 design that provides a tight 360seal to the pipe. By quickly and reliably connecting all PEX pipe, it creates uniform pressure on the pipe surface for a perfect seal and leak-free fastening. Wide Applications- Pex clamp Rings are suitable for all plumbing systems and are ideal for water supply systems, water heaters, air conditioning systems, plumbing systems, hydronic heating, electrical conduits, as well as automotive, industrial and marine applications.

AIR LINE TOOLS This 2pcs pneumatic fitting disconnect tool set is the specialized tool for quick disconnect push to connect air fittings 14, 516, 38, 12 6mm, 8mm,10mm,12mm. With straight unions4, Y splitters4, elbows4, straight reducer unions3 in total 15 pcs pneumatic fittings.. ONE-HAND OPERATION This air line disconnect tool is designed to release the air hose fittings and push out the air tube simultaneously. It can be easily operated with one hand without pulling out the air hose with the other hand, which brings much convenience to your work.. EASY TO USE Position the push to connect removal tool next to the fitting with the lever in the middle. Squeeze the handles to clamp the air pipe hold, depress the middle lever with your thumb or other fingers to release the locking collar. The tube will be effortlessly pushed out.. WILDY USED This push connect tool has a compact size, especially suitable for small spaces and closely arranged pneumatic connectors combinations. Widely used in air system and water system such as Reverse Osmosis device, 3D printers, aquaria and so on.. HIGH QUALITY This quick connect removal tool is made of heat-treated carbon steel, which have higher strength and additional durability. The handle is made of PP and TPR soft material, which is comfortable to hold and prevents hand fatigue..

SHARKBITE PEX CLAMP TOOL This SharkBite clamp tool compresses stainless steel clamp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings. COMPATIBILITY One clamp tool works with all size clamps from 38 inch to 1 inch eliminates the need to check each fitting ring with a GoNo-Go Gauge when properly calibrated. EASY TO USE The 3-handle design version of this clamp tool allows for a one-handed grip keeping the other hand free to hold a flashlight, ladder, or pipe. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. CERTIFIED PEX clamp tools meet ASTM F-2098 Standard.

6 IN 1 TOOLKIT This Depth Gauge and Pipe Deburring Tool Kit includes six sizes 14, 38, 12, 58, 34, and 1. It fits most brands of push fit fittings and valves, making it an essential tool for any handyman or plumber.. DOUBLE FUNCTIONALITY Use this gauge to measure both the inner and outer diameter of pipes, while also facilitating quick removal of push fit fittings without additional tools. It's a must-have for efficient plumbing tasks.. MATERIALS Constructed from sturdy plastic, this tool is resistant to bending and deformation. The ABS material used for the reamer bodies ensures longevity and durability for repeated use.. EASY TO USE Simply the pipe with the blade for straightforward operation. The intuitive design allows users of all skill levels to handle the tool with confidence.. WIDE APPLICATIONS Compatible with copper, PEX, CPVC, and PERT pipes, this deburring tool is perfect for various plumbing applications or as a mechanic's tool in workshops..

Multi-Size VersatilityConsolidates 12, 34, and 1 sizes into a single toolno more switching between multiple tools for different pipe dimensions.. Tight-Space AccessExcels in confined areas like underground installations or behind walls, where standard tools cant get enough leverage on the release collar.. SimplicityErgonomic wide-grip handles allow quick, single-handed disconnectionideal for permanent installations without access panels.. Pipe ProtectionEvenly distributes pressure around the fitting to release the collar without damaging pipes or fittingsperfect for reuse and system modifications.. Built to LastConstructed with a rustproof carbon steel body to withstand demanding job site conditions, trusted by plumbers and DIY enthusiasts alike..

SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs marks the proper insertion depth for SharkBite Max and First generation fittings. COMPATIBILITY Deburring tool is compatible with 12 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes convenient for use in confined spaces. DURABLE This deburring tool is composed of lightweight and durable nylon. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

98060 Cutter, T150-2 Shark tooth 4. This item is used for Hand tools Tool Organizers ,Pliers Cutters. This product manufacture by United States. Drain Cleaning Auger. Fits 78 Ridgid Sectional Cable. Use to Clear Out Stoppages, Roots, Rags and Sticks. Used To Clean Sides of Pipe After Smaller Augers Have Passed Through. Easy Snap-on Attachment to Cables.

REPAIR HOSE COUPLING This hose coupling features 12 in. x 12 in. push-to-connect ends and 18 in. flexible braided length for bridging pipe gaps with ease. EASY TO INSTALL Push-to-connect design joins two pipes directlyreplaces two fittings and extra pipe sections, saving time and effort. COMPATIBILITY Works with PEX, copper, CPVC, PE-RT, and SDR-9 HDPE pipe in any combination. STRONG AND DURABLE Constructed from high-performance DZR brass with a reinforced stainless-steel collar for added durability. RATED PERFORMANCE Approved for 200 degrees F and 250 PSI with a 2K maximum burst can be rotated after install and removed using SharkBite disconnect tools sold separately.

The sharkbite-removal tool is ideal for professional plumbers and DIYer enthusiasts working with Plastics, coppers, CPVC, or HDPE piping systems requiring great push to connects fitting maintenance by using our shark-bite removal tool. This shark-bite tool combines 12in, 34in, 1in and 1 tongs in ergonomic unit, so this pipe fitting tools featuring a corrosions resistantly grippe for smooth disconnection to use the Disconnect Tong. Our sharkbite-disconnect tool can use in confined space like undergrounds installations or behind wall where standard tool struggle to grip release collars on brass push fit fittings. The disconnect tong tool efficiently removes 1 2, 34, and 1 brass push fit fittings with a rustproof carbon steel body and integrated multiple size design of our sharkbite-tool for hard to reach plumbing systems by using our disconnect tool. The pneumatic fitting disconnect tool with single handed operations simplifies tubing removal while maintaining structural integrity, great for permanent installations without access panel.

SHARKBITE PEX CRIMP TOOL GONO GO GAUGE PEX crimp tools include GoNo Go Gauge to ensure rings are fully compressed. COMPATIBILITY This plumbing tool works well with PEX tubing and copper crimp rings. EASY TO INSTALL The SharkBite Connection System includes a line of rugged tools and quality accessories that help ensure a dependable trouble-free installation of PEX or Barb plumbing systems. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use ideal for plumbing and irrigation projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

EASY TO INSTALL The 1 in. x 1 in. push-to-connect brass elbow requires no soldering, glue, or toolsideal for connecting PEX, copper, CPVC, PE-RT, and HDPE pipes in tight spaces or wet lines. COMPATIBILITY Works with PEX, copper, CPVC, PE-RT, and SDR-9 HDPE pipes in any combination for quick connections in residential or commercial systems. STRONG AND DURABLE Stainless steel collar reinforces the internal cartridge and reduces insertion force by 50 for a secure and reliable connection. SAFE AND RELIABLE Made of quality DZR brass with stainless steel components SharkBite fittings are trusted in both residential and commercial plumbing applications. SPECS 90 degree elbows withstand 200 degrees F and 400 PSI, inspected for functionality to 2,000 PSI burst pressure.

SHARKBITE COPPER CRIMP RING This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe available in 38 inch to 2 inch sizes. VERSATILE This crimp ring works well with brass or poly PEX crimp fittings crimp to create a watertight seal without soldering or glue required. DURABLE Crimp rings are made from copper for stronger durability. ASSURANCE Copper clamp rings and heavy-duty PEX Crimping tools do not require calibration and allow each joint to be checked with a GoNo-Go Gauge. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.

SHARKBITE PIPE CUTTER This SharkBite pipe cutter makes a clean cut for 12 to 1 inch pipe features a compact design for working in tight spaces. COMPATIBILITY This radial-style design pipe cutter cuts PEX and PE-RT pipe. EASY TO USE This pipe cutter is lightweight, durable, and easy to use push the pipe into the cutting chamber and rotate the cutter in the direction of the arrow on the tool, then squeeze the handles to release the pipe after cutting. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

VERSATILE TOOLWith one tool allows 12,34,1 Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra interchangeable faceplates required.. REMOVES IN SECONDSSimply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly.. DURABILITYConstructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life.. ERGONOMIC DESIGNTPR coated grips prevent slippage in wet conditions and one-handed operation design to allow your free hand the ability to assist in the removal of fittings.. VERSATILITYIt's compatible with brand Push-fitPush-to-Connect fittings..

SHARKBITE REMOVAL TOOL 12 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily can remove or adjust push to connect fittings in tight spaces for easy disassembly. COPPER, PEX, CPVC, CTS, HDPE SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces. DURABLE AND HIGH QUALITY Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust SharkBite's quality and performance are field-proven and trusted in the plumbing industry. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

DUAL SIZE CRIMPING TOOL Includes a 12 inch and 34 inch pex crimping tool for versatile plumbing projects. Designed for use with pex pipe and fittings for secure connections every time.. EASY HANDLING DESIGN Ergonomic handles provide comfort and control during extended use. Lightweight at 6.38 lb for easy maneuvering in tight spaces and overhead plumbing installations.. DURABLE MATERIAL CONSTRUCTION Made from high-quality brass and steel for long-lasting performance. Built to withstand repeated use in demanding plumbing environments without losing precision.. COMPLETE SET INCLUDES Comes as a combo set with two crimping tools and all necessary components for immediate use. Ideal for both professional plumbers and DIY enthusiasts working with pex pipe.. COMPACT STORAGE SIZE Tools measure 15.75 in length, 4.75 in width, and 1.4 in height for convenient storage. Fits easily in most toolboxes and work bags for on-the-go plumbing repairs and installations..

SHARKBITE BARB CLAMP RING This stainless steel clamp ring is the best option for connecting PEX tubing when lower material costs are preferred. COMPATIBILITY Clamp brass or poly crimp fittings onto PEX or PE-RT pipe. EASY TO INSTALL Slide the 1 inch clamp ring over the pipe, push the pipe onto the fitting and tighten the clamp ring using a PEX clamp tool to make a secure connection. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use. CERTIFIED SharkBite clamp rings meet ASTM F2098 requirements.

PIPE CONNECTOR Brass pipe connectors are perfect for making easy connections between same-size pipe ideal for use in tight spaces Large diameter fittings 1-14 to 2 inches require a Stiffener sold separately when connecting to PEX pipe. VERSATILE SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe approved for underground and behind-the-wall applications with no access panels Wrapping required when burying underground. EASY TO INSTALL Straight coupling can be easily installed without the need for soldering, glue, or additional tools can be installed in wet lines. LEAD FREE Straight coupler is composed of strong and sturdy lead free DZR brass. CERTIFIED Water service coupling is rated to 200 psi and 200 degrees F 93 degrees C.

SHARKBITE DISCONNECT CLIP 14 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required. COPPER, PEX, CPVC, CTS, HDPE SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces. DURABLE AND HIGH QUALITY Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust SharkBite's quality and performance are field-proven and trusted in the plumbing industry. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

PEX CRIMP TOOL Built with SharkBite's attention to detail and quality. PERFORMANCE SharkBite fittings are rated to 200 PSI and 200 Degrees F. Use in potable water and hydronic heating applications. VERSATILTY SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination. QUALITY Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection. RESIDENTIAL and COMMERCIAL All SharkBite fittings meet the same standards for commercial and residential plumbing applications.

Material High Density Plastic. Opening Size12 in. UsageFor Removal and Installation of Sharkbite Fittings and Valves. Product is individually bagged.

FAUCET CONNECTOR WITH STOP VALVE The SharkBite Max Stainless steel braided faucet connector features a 12 in. push-to-connect inlet and a built-in quarter-turn full-port 12 in. straight stop brass ball valve, ensuring a secure and watertight connection of your plumbing setup Can be installed on wet lines and is pressure-testable immediately. COMPATIBILITY The SharkBite Max faucet water supply connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes. EASY TO INSTALL No special tools, crimping, glue, or soldering required. The integrated SharkBite Max Straight Stop allows for precise control and shut-off of water flow to plumbing fixtures and appliances ensuring a reliable and efficient installation. NO PEX TUBE LINER With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on CopperCPVC. STRONG AND DURABLE The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force features a strong and durable DZR lead-free brass body and can withstand up to 160 degrees F and 125 PSI.

PEX EXPANSION TOOL KIT The SharkBite expansion tool kit is designed to expand PEX-A pipe to allow insertion of a fitting. WHATS INCLUDED PEX kit includes a ratcheting manual expansion tool, three interchangeable expansion heads 12 in., 34 in., and 1 in., lubricant, and a convenient carrying case. EASY TO INSTALL Tools allow for quick and easy installation use expansion tool to insert and hold fitting in place until the expansion ring and tube contracts tightly to ensure proper installation. No solder or bonding agents required. COMPATIBILITY PEX expander kit is compatible with the F1960 standard PEX expansion system suitable only for PEX-A tubing. SECURE CONNECTION PEX-A expansion tool kit allows for a secure, leak-free connection without the need for crimping or clamping.

2 Stage Push-Fit Connection System For OD Controlled Copper, CPVC Or Pex Pipe. Easily fits and this is easy to install. Made in Australia. No soldering, clamps, unions, or glue required.. Connects copper, PEX, and CPVC pipe in any combination.. No soldering, clamps, unions, or glue required.. Connects copper, PEX, and CPVC pipe in any combination.. Approved to be used underground and behind walls without access panels..

10 Pack. 34 x 34 x 12. For cross link polyethylene tubing for hot cold water. Compatible for potable water distribution and hydronic heating applications. Can be used in both a stainless steel clamp system, or a copper crimp ring system.

No Damage To Walls Copper Supply LinesThis compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 12-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool.. Not Need To Cut Off The PipeSaves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple.. Work On Corroded FrozenFully machined body and screw, this ferrule puller is durable, corrosion resistant wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.. Easy Fast Remove1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.. Great Compression Sleeve Puller ToolWe love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.. NOTEPlease note that this compression sleeve puller is for 12 compression fittings only..

Ergonomic Comfort Easy Grip This premium fish hook remover tool features an ergonomic plastic handle that fits your palm perfectly, designed for smooth wrist twisting and convenient single-hand usemaking it a must-have for your fishing gear.. Lightweight Yet Durable Construction Crafted from selected aviation-grade aluminum tube with a stainless steel hook, our fishing hook remover boasts exceptional strength and excellent corrosion resistance to salt water, ensuring long-lasting performance for all your fishing adventures.. Simple 3-Step Operation No complicated steps needed Our hook remover tool fishing allows you to effortlessly extract hooks in just 3 easy steps hook out, fix the hook, and release from the fish to take the hook outsaving you time and hassle on the water.. Deep Hook Removal Finger Protection Perfect for removing deeply swallowed hooks including troublesome gut hooks, this fishing accessory keeps your fingers safe from sharp-toothed fish like trout and snapper, preventing painful pricks and injuries.. Fish-Friendly Design The fishing hook remover removes most hookseven deeply embedded oneswith minimal harm to the fish, allowing anglers to practice catch-and-release easily and protect aquatic ecosystems..

Work On Corroded Frozen High-quality A3 steel material and Zinc-plated finish ensure corrosion resistance and durability. Effortlessly remove nuts and compression rings even from corroded or frozen pipes. No Damage to Walls or Pipes Designed for use in tight spaces without extra cutting. Simply turn the lever to remove old compression fittings without damaging the connection, saving time and effort. Two Disassembly Methods Method one Only remove the ferrule Clamp ferrule with notched end and turn the handle. Method Two Remove both the nut and the ferrule Place the notched end behind the nut, and hold the body firmly while turning T-Handle to detach. Compact and Portable The tool is suitable for 12 copper water compression fittings. Weighing only 367 grams makes it easy to store. The flat head design of the T-bar also allows the lever to be carried around without falling off. Wide Application This Compression Sleeve Puller Tool can be used in kitchens and bathrooms. If you need to replace 12 pipe compression fittings on your dishwasher, sink or toilet, it can be your ideal assistant.

High qualityMade of heavy-duty die-cast aluminum frosted material, it is durable and lightweight, and will not scratch the surface of the bathtub. Widely usedThe double end design, each end to fit a different size of drain pipe, can meet most of your daily needs.. Easy to UseBathtub drain remover wrench is suitable for installing and removing bathtub drain kits, faucet wrench is fit for most drain, better used combination with adjustable wrench or screwdriver. NotePlease check the product size when purchasing.. Any question, Please contact us..

UNIVERSALThis tool meets ASTM 2098 standard will work with stainless steel clamps from any manufacturer to make PEX connections from 38-inch to 1-inch. It can also be used to cinch single ear hose clamp,as long as the ears lengthwidth is within the opening range of the jaws.. INNOVATIVENew design makes it be a multi-function tool which can cinch clamps and remove the clamps from pipe to allow re-using the pipe fittings,cost-effective and convenient.. DURABLEThe cinchremove tool is constructed of durable high-quality steel with forging process to ensure integrated mechanical property and long service life,and inside of the jaw is processed with Wire EDM Cutting to ensure the precision.. EASYIts easy to switch cinch and remove function.And the ratcheting design and self-release mechanism makes the cinch effortless.The tool is factory-adjusted with no requirement for calibration tool.. ALL-IN-ONEThis is a All-in-one kit for pex pipe installation, it includes 1pc of cinchremove tool,1pc of Pex cutter,20pcs of 12-inch clamps and 10pcs of 34-inch clamps..

MULTI-FUNCTIONAL SINK INSTALLATION TOOL - 14 in 1 sink wrench is used for the installation of pipes under bathrooms, toilets, kitchens, and sinks. Faucet installer most suitable for supply nuts, shut off valves, strainer baskets, supply line nut, faucet nuts. It is easy to operate and friendly to non-professionals. HIGH QUALITY - The Faucet Installation tool is made of Engineering-Grade ABS and high-Strength zinc alloy, which is environmentally friendly, Sturdy and durable, and not easily deformed. 4 inserts is very easy to disassemble, simple to clean and hygienic. 14 IN 1 DESIGN - This latest wrench with more inserts, which can meet more need of replacing faucet nuts in the sink kitchen commonly used in families, without having to hire a professional plumber, saving time and money. This multi-functional wrench a necessary gadget for your family toolbox.. HUMANIZED THOUGHTFUL DESIGN - Suitable for small space operation and easy to rotate. The extra-long design allows you to turn hard-to-reach mounting nuts on faucets, sprayers and ball valves. This faucet and sink installer tool is not only a wrench, but also a spirit level. PACKAGE INCLUDE - 1 plumbing and sink installer, 4 stripping attachments 28mm1.1in, 34mm1.33in, 40mm1.57in, 44mm1.73in, 2 screws, 1 T-shaped stripping attachment. The sink installer tool can replace different disassembly heads for different nuts. BECEUASE IT IS PLASTIC, IT CAN NOT BE COMPARED WITH IRON. IT NEEDS PORPER USE OF STRENGH..

SHARKBITE FAUCET CONNECTION KIT This installation kit includes 2 stop valves, 2 PEX pipes, 2 swivel faucet connectors, 1 chrome trim cover, and 1 disconnect clip features quarter-turn full-port brass ball valve. COMPATIBILITY This faucet connection kit works well with PEX, copper, CPVC, and PE-RT pipes features a sleek chrome finish for an attractive appearance. EASY TO INSTALL This intuitive connection kit allows for quick and easy installation, with no tools, crimping, glue, or soldering required can be installed in wet lines remove using a disconnect clip or disconnect tongs. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use. SPECS This faucet connection kit can withstand 200 degrees F and 200 PSI.

FAST AND EASY INSTALL SharkBite Max push-to-connect brass push ball valves are perfect for making quick transitions between a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools pipe connector can be installed in wet lines. NO PEX TUBE LINER With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on CopperCPVC. STRONG AND DURABLE The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force. LEAD FREE This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications. CERTIFIED Ball valves with drain and mounting tab are rated to 200 degrees F and 400 PSI with 2K maximum burst.

SHARKBITE PIPE CUTTER This SharkBite pipe cutter makes a clean cut for 18 to 1 inch pipe features a compact design for working in tight spaces. COMPATIBILITY This scissor-style design pipe cutter cuts PEX and PE-RT pipe. EASY TO USE This pipe cutter is lightweight, durable, and easy to use push the pipe into the cutting chamber and squeeze the handles to release the pipe after cutting. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

APPROVED TO USE Certified and listed to ASSE 1061, NSFANSI 61 Meet UPC, cUPC requirements. Lead Free brass are safe for drinking water and hydronic heating water distribution.. EASY INSTALLATION Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms Just push and lock the pipe to get the seamless performance.. VERSATILE APPLICATIONS Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR ball valve plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.. LONG LASTING Made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 F and 200 PSI and long period of wear and tear.. BUNDLE INCLUDES Pushfit 12 Inch Ball Valve with Red Handle 6 PCS Pushfit 12 Inch Ball Valve with Blue Handle 6 PCS 12 Inch Disconnect Clip 1 PC..

3-In-1 Extractor Set This 36pcs broken bolt extractor kit includes 16pcs bolt extractor sockets 14 to 34 6mm-19mm, 13pcs multi-spline screw extractors 18 to 12, and 6pcs spiral flute screw extractors 1 to 6. Available in both sae and metric sizes. Tight Grip, Easy Out With aggressive left-hand spiral, multi-spline and internal reverse design, this removal tool offers superior grip and faster threading. Easy to remove broken, stripped, damaged, or rounded-off screws, bolts, nuts, studs and pipe. 38 Drive Hex Head Standard 38-inch square drive is suitable for both hand and power tools. With an internal square drive and an external hex head, you can connect with an impact wrench, tap handle, open end wrench, ratchet wrench, and various other tools. Heavy-Duty Construction Each screw and bolt extractor is crafted from high-hardness chrome-molybdenum steel, offering superior strength. The phosphate coating provides for lifetime durability, with laser-etched size markings for easy identification. Compact and Portable Rugged carry case keeps all screw bolt extractors organized, making your set easily portable. Remover kit meets the needs of mechanical, automotive repairs and home use. Ready to serve you now and for many years to come.

Package Includes1 pcs disconnect tongs tool 1 pcs deburr gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 12 inch, 34 inch or 1 inch.it can deburr the cut end of the pipe bevel the cut edge, ensure complete seal and smooth connection.. Quality Materialthe push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings.. Deburr and Gauge Tool deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 14 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe. Fast Disconnection simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..

1.Versatile Tool This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth12, 34, 1. It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused.. 2.Unique Design The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work.. 3.Interchangeable Teeth Press the button at the top of the removal tool, then insert the replacement piece to complete the switch.. 4.How to Use To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless.. 5.Superior Material This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. Its suitable for various operating environments, with a long service life.. 6.Ergonomic Design The handles of the push-fit disconnect clamp tool is ergonomic, that is more comfortable to grip. In addition, its oil resistant, skid resistant and not easy to fall off. Its more convenient to use..

SHARKBITE DISCONNECT CLIP 12 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required. COPPER, PEX, CPVC, CTS, HDPE SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces. DURABLE AND HIGH QUALITY Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust SharkBite's quality and performance are field-proven and trusted in the plumbing industry. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

Country Of Origin China. Package Width 8.1 Centimeters. Package Height 12.3 Centimeters. Package Length 3.6 Centimeters.