Requires Snap-in Fenders Installation Kit 295100550 or 295100729 to install on models other than SPARK. Fit on all watercraft, except seadoo GTI, GTI SE, GTR and WAKE PRO 2020. foy seadoo accessories bumpersfender pwc fender bumper. The applicable model is on the following details page, please pay attention to it..

INNOVATIVE PATENTED PRODUCT The AWEMUFA boat fender boasts a sleek, streamlined exterior design inspired by fashionable sports cars. These boat dock bumpers are made from sturdy and environmental EVA material, providing excellent impact resistance and ensuring safety and reliability during docking. EASY INSTALLATION Unlike traditional inflatable boat fenders that require knots, AWEMUFA boat fender innovative design makes it easy to install without knots, and the wedge-shaped design prevents bouncing during use, ensuring the fender stays in place. INTEGRATED LOCKING SYSTEM Our extra-long straps are not only easy to use but also have an integrated automatic locking system that securely fastens the fender to the dock or deck without the need for complicated knots. SUITABLE SIZE The AWEMUFA boat fenders measured as 17.12 inches 8.27 inches. To get the best protection, we recommend adding a fender for every 10 feet of boat length. For boats under 30 feet, at least three fenders are needed. AWEMUFA boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection. AFTER-SALES SERVICE AWEMUFA's excellent and innovative quality continuously drives our development, and our perfect service guarantees customer satisfaction. We promise to provide excellent service for every buyer. If you need assistance, please follow these steps Go to Your Orders, find your order in the list, select Problem with order, choose your topic from the list displayed, and then select Contact seller.

UPGRADED AND INNOVATIVE The Ehaho pwc fender boasts a sleek, streamlined exterior design inspired by fashionable modern watercraft. These pwc bumpers are made from sturdy and environmental material, providing excellent targeted impact protection and ensuring safety and reliability during docking or tying up alongside other watercraft. RUGGED GRADE FOAM DEFENSE Unlike hard plastic versions, these won't dig into your skin or scrape you up if there's sand on them. Built from premium non marking closed cell EVA foam, these pwc dock bumpers absorb impact while resisting UV exposure and water damage, which can keep your PWCs finish clean and protected and neatly for convenient onboard storage. WIDER IMPACT SURFACE AND CUSTOM COLOR MATCH Our PWC fenders provide a broader impact zone than traditional designs for superior dock and hull protection. Available in multiple color options to perfectly match your watercraft, combining enhanced safety with a seamless, personalized look. EASY INSTALLATION Unlike traditional pwc fenders that require knots, Ehaho pwc fender bumpers innovative design makes it easy to install without knots. These jet ski bumpers for docking stay firmly in place to protect against dock impact, scratches, and contact with nearby boats at marinas, sandbars, and crowded docks. PERFECT FOR MOST PWC Ehaho pwc fenders are suitable for various types of pwcs, which are compatible with Sea-Doo, WaveRunner, Jet Ski, these are perfect for a Personal Water Craft PWC or in our case, a small 11-foot shallow skiff. The fit is excellent and surprisingly universal.

Innovative Product The Boat fender boasts a sleek, streamlined exterior design inspired by fashionable sports cars. These boat dock bumpers are made from sturdy and environmental EVA material, providing excellent impact resistance and ensuring safety and reliability during docking. Patents pending.. Easy installation Unlike traditional boat fenders that require knots, AWEMUFA Boat Fender innovative design makes it easy to install without knots, and the wedge-shaped design prevents bouncing during use, ensuring the fender stays in place.. Integrated locking system Our extra-long straps are not only easy to use but also have an integrated automatic locking system that securely fastens the fender to the dock or deck without the need for complicated knots.. Suitable size The AWEMUFA boat fenders measured as 17.12 inches 8.27 inches. To get the best protection, we recommend adding a fender for every 10 feet of boat length. For boats under 30 feet, at least three fenders are needed. AWEMUFA boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection.. After-sales service AWEMUFA's excellent and innovative quality continuously drives our development, and our perfect service guarantees customer satisfaction. We promise to provide excellent service for every buyer. If you encounter any problems while using our products, please let us know immediately and we will do our best to solve them immediately..

PERMANENT, BOTH BOAT DOCK PROTECTION Say goodbye to tangling and constantly adjusting traditional hanging boat fenders. These permanent dock bumpers mount directly to your dock edge, creating a reliable, continuous barrier that protects your boat hull and dock structure from costly collision damage in any tide or current.. 5MM THICK MARINE-GRADE PVC Engineered for extreme durability, these boat bumpers for docking are made from premium 5mm high-density PVC with reinforced ribs. The UV-resistant and corrosion-resistant material withstands harsh saltwater environments and temperature changes without hardening or cracking, ensuring year-round defense.. COMPLETE STAINLESS STEEL HARDWARE KIT We include everything you need for a secure installation right out of the box. Each 2-pack comes with 8 premium stainless steel screws and washers. Mount them permanently to either wood or metal dock surfaces without worrying about rust or buying extra hardware.. EASY 3-STEP INSTALLATION Setup is simple our boat bumpers have all been pre-inflated. But if the inflation is still insufficient, please proceed to just inflate the bumpers using a standard needle valve air pump and needles not included, position them on your dock edge, and secure them with the provided screws. The ergonomic curved arc contour gently guides your vessel into the slip, minimizing friction.. UNIVERSAL FIT SIZING GUIDE Measuring exactly 15.4 x 6.5 x 5.3 inflated, these dock edge bumpers fit perfectly on both floating and stationary docks. Planning your setup We recommend 2 pieces for docks under 10 feet, 3-4 pieces for 10-30 feet, 5-6 pieces for 30-50 feet, and 6 pieces for docks over 50 feet..

Superior Impact AbsorptionProtection Constructed from high-quality EVA foam, NICEMER fenders feature an extended contact surface with an integrated anti-slip pattern. This design significantly expands the buffer zone and effectively disperses impact force, ensuring the fender stays securely in place while delivering maximum protection for your boat. Patent protected. High QualityDurability Constructed from high-density EVA marine-grade foam, this fender offers superior UV and saltwater resistance for long-lasting durability. Unlike inflatable fenders, its solid, puncture-proof build eliminates deflation risks and performs reliably in extreme heat or freezing conditions.. Easy to UseInstall Effortless to install and use, the NICEMER boat bumper features an integrated automatic locking system with an extra-long strap for quick, tool-free attachment to docks or decksno complex knots, ropes, or hassle.. Universal Compatibility NICEMER boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection.. EVA boat fender size Suitable for boats betwwen15 and 25 feet long, we suggest you use one for every 10 feet of boat length, for boats between 15 and 25 feet then need two fenders, for boats under 30 feet, at least three fenders..

EXEMPLARY CUSTOMER SUPPORT Your satisfaction is paramount to us. If you encounter any issues with our product, please notify us, and we will promptly work to address them. To reach us, simply go to Your Orders, find your order, report the issue, select the relevant topic, and then choose Contact seller. HIGH-STRENGTH MATERIAL Our fender is made of 1280D marine-grade PVC, ensuring durable quality. Crafted to safeguard the watercraft such as your valuable boats, yachts, and sailboats. Resistant to abrasion and tears. PREMIUM MOORING BUMPER Equipped with stainless steel D-ring and 8mm thick boat rope at each end for easy connection. These inflatable fenders not only address docking and tie-up concerns but also make hooking up with your friends much simpler. QUICK INFLATION AND DEFLATION Effortlessly inflate and deflate with our quick inflation valve and electric pump. Designed for rapid inflation, our powerful electric air pump is compatible with AC 110120V sockets, ensuring efficient performance every time. COMPACT STORAGE COMPLETE SET Sized at 10ft High x 18inches Diameter, suitable for small and medium-sized boats, our product is easy to store and comes with a lightweight storage bag. The complete set includes two boat ropes, an electric air pump, a repair kit, and a storage bag.

Value-Packed BundleEach set includes 2 high-quality fender bumpers,each bumper sized at 14x6x3.2 inches, 2 adjustable bungee cord each selastic cords sized at 17.7 inches, and 2 soft loopsadd it to your front storage compartment for easy access to your docking and anchoring accessories.. Effortless Installation Our Jet Ski Bumpers features bottom-mounted U-hooks that securely grab onto the rail of your jet ski or PWC, preventing any unwanted movement. PWC Fender bumpers compatible for Jet ski, Yamaha, Waverunner, Kawasaki bumpers protect the sides of the boat while docked even in rough waters.. Enhanced ProtectionOur fender bumpers provide robust protection against UV rays, saltwater, and extreme weather conditions,built with advanced, high-quality materials.The boat bumpers feature extra-thick padding to provide a seamless fit to the varying contours of your boat and guard your watercraft against scratches and dock damage.. Designed for conveniencethese boat bumpers for docking fold into a compact size, making storage easy.Boat dock bumper effortlessly fit into the front storage compartment,ensuring convenient access whenever you need them.. Additional Elastic Cords 4 additional elastic cords equipped with adjustable lengths and anti-slip locking buckles. eliminating the risk of accidental decoupling and ensuring quick, hassle-free installation every time. ensuring they remain securely in place and preventing any loosening..

Wide fitment Compatible with Sea-Doo 1998-2005 GTI GTI LE GTI LE RFI, 1997 XP, 1998-1999 XP Limited, 1998-1999 GTX Limited, 2000-2003 GTX DI, 1998-2002 GTX RFI, 1999-2001 GS, 1999 GSX Limited, 2000-2001 LRV, 2000-2003 RX DI, 2000-2002 XP, 2003-2004 XP DI, 2006-2007 GTI RENTAL, 2003-2006 GTX 4-TEC , 2006-2007 GTI STD, 2004 3D RFI GTI, 2006-2007 GTI SE, 2007 GTX LTD BVIC, 2007 GTX WAKE BVIC, 2007 GTX STD AND WAKE. Wide fitment Compatible with 2007 RXT BVIC, 2007 RXP BVIC, 2007 RXP NA, 2008-2010 GTI RENTAL 130, 2008-2010 GTI SE 130, 2008-2010 GTI 130, 2008-2010 GTI SE 155, 2008-2009 GTX 215, 2008-2009 GTX 155, 2008 GTX LTD 215, 2008 RXP 155, 2008-2009 RXT 215, RXT X 255, 2008-2009 RXP 215, 2008-2011 RXP X 255, 2008-2010 WAKE 155, 2008 WAKE 215, 2009 WAKE PRO 215, 2011 GTS PRO 130. Part number New OEM 291002244, 291001505, 291001505, 291001505, 291001571. Durable Bumper corner cap Make from metals of higher quality than those on the market, so it has the advantages of stronger hardness, better oxidation resistance, more durable. Package Includes2PCS 291002244 Bumper Corner Cap.

Perfect Protection Boat The inflatable boat bumper provides a cushioned barrier that absorbs impact and prevents your boat from damage caused by collisions with other boats, docks, or other objects in the water.. Easy to install and store The bumper for docking boats can be easily inflated using the manual pump we provide and can be deflated for compact storage when not in use.. Different Design Our boat bumper is circular and has holes on both the top and bottom ends. This design allows for the bumper to be used horizontally or vertically depending on your specific needs.. High-quality Material The inflatable boat bumper with 70.86 Length double-braid nylon fender line is made of high-quality PVC material, which is durable and resistant to wear and tear.. Various Size Options The bumper comes in a variety of sizes to fit different types of 25-35-foot boats, we suggest you use one for every 10 feet of boat length, for boats under 30 feet, deploy no less than three fenders..

Patent Design The ergonomic design and environmental materials make our boat fenders for docking unlike traditional fenders, ours do not require inflation, eliminating any air leakage problems and enhancing reliability and durability. To further ensure longevity, we have incorporated reinforced nylon ropes with a fixed buckle, providing additional protection and sturdiness, particularly during stormy weather.. Strong Protection These boat dock bumpers are molded in a cross-linked closed-cell foam that is extremely long-lasting, it wont degrade during prolonged exposure to the sun. The extra-long strap is easy to loop over higher attachment locations, and the dock bumpers will keep your boat from getting scratched and damaged when tied up at the dock and around other boats.. Quick Installation The integrated strap ensures effortless connection to the dock. Simply connect and lock it, eliminating the need for complex knots. The locking feature expedites the installation of boat bumper fenders.. Size Choosing kemimoto boat fender for docking size 17in length 8in dia. Intended for use with boats 15-25 feet long, we suggest you use one for every 10 feet of boat length, for boats under 30 feet, deploy no less than three fenders.. Wide Range of Applications The Kemimoto dock corner bumper is suitable for a variety of watercraft including bass boats, pontoon boats, ski boats, jon boats, small fishing boats, and bow riders with low freeboards. These compact fenders are specifically designed to safeguard both the gunwale and hull, making them an ideal choice for boat owners seeking maximum protection..

PWC Boat Fender Kit The motorboat bumpers Kit includes 4 black PWC fender, 4 elastic cords, and 16 different sized motorboat cleats, featuring a full set of accessories for boat fenders If you're looking for a reliable solution to prevent your boat from hitting docks or other boats, this PWC bumper is ideal. Versatile Installation boat fenders for docking are suitable for a variety of scenarios, compatible with various types of motorboats or small boats under 25 feet, and can also be installed on docks for boats to dock NOTE Use two bumpers on motorboats and one bumper every 10 feet on the boat. Ideal Fit The motorboat bumpers for docking consists of two parts, the folding design can be applied flexibly, seamlessly fit the different contours of your boat and prevent scratching while docking, protecting the longevity and pristine condition of your motorboat. Reliable Materials The PWC bumper fenders are made of marine grade, tear resistant, triple layered gland with a closed cell foam interior, 14.69 x 5.91 x 3.15 inch PWC bumper guards have a larger contact area Adjustable length elastic cord with non slip locking clips to secure fenders in place and prevent accidental unhooking. Easy to Use and Store Use the included rope to thread the PWC contour fender's hole to hang the motorboat fender and secure it securely in place on your motorboat The rope is long enough to adjust to various positions, providing all round protection Motorboat bumper folds and dimensions compatible with all types of motorboat front hatches for easy storage.

Over time, damaged or missing fender mounts can cause scratches, cracks, and safety risks while docking or riding. Our product provides a durable solution to secure your fenders and protect your watercraft.. Compatibility VehiclesFit most watercraft, except for SeaDoo GTI, GTI SE, GTR, and WAKE PRO models 2020. Replace Part Number295100729 295100418 295100550 295100944. Premium MaterialSnap-In Fenders Installation Kit is constructed from high-density, UV-resistant plastic, built to withstand harsh sun, saltwater, and repeated impact, while resisting cracking, deformation, and fading for long-lasting protection.. FeatureRemovable Fender Installation Set cushions impacts to protect your watercraft from scratches and dents, features a bright color for high visibility and easy retrieval, is made from high-density, UV-resistant plastic, and snaps on quickly without tools.. Include PackingRemovable Fenders 2Mounting Brackets 2Installation Screws 4. Shop With AssuranceBuy the SUSUPACi Snap in Fenders Bumpers Kit with confidence, featuring a 1-year warranty. If any issues arise, simply reach out to us for a swift replacement. Experience exceptional value with a reliable, cost-effective alternative to dealership prices, ensuring top-notch quality and your peace of mind.

Fitment Snap-In Fender Bumper for Sea-Doo RXT 215 230 260 RXT X 255 260 300 Wake Pro 230 GTX 155 170 230 300 FISH PRO 155 170. Part Number 295100418, 295100729. Function It protects the hull such as a motorboat from scratches, dents, and paint wear when docked or sailing in parallel by buffering the impact force. Advantages Thick material, strong weather resistance, firm fixation, good buffering effect. Service Please Check the Fitment and Part Number before Buying. 365-day Service Support.

Reliable QualityThis drive shaft bumpers is made of high-quality automotive thermoplastic materials, solid and durable, corrosion resistant and wear-resistant.. Replace Part Numbers 272-000-019, 272000019, 45-101A-06,003-350. Fitment This drive shaft bumpers compatible with Seadoo 1989-1997 SP ,1990 GT ,1991-2002 XP, 1992-2001 GTS, 1992-2002 GTX, 1993-2002 Explorer, 1993-1996 SPI, 1993-1999 SPX, 1994-1999 Speedster, 1994 XPI, 1995-2000 Sportster, 1995-1997 HX, 1996-2001 Challenger, 1996-1997 GSX, 1996-2002 GTI, 1997-1999 Challenger 1800, 1997-2001 GS, 1997 GSI 5622, 1998-1999 Sportster 1800 ,1998-2000 GSX Ltd, 1998 GTX RFILTD, 1998-1999 XP Ltd, 1999 Speedster SK, 1999-2001 GSX RFI, 1999-2002 GTX LTDRFIDI, 2000-2006 Sportster LELTLE DI ,2000-2003 LRVLRV DI ,2000-2003 RX DIRXFits all 2 stroke Sea-Doo drive shafts with bumpers. Easy to InstallManufactured to meet specifications for fit, form, and function Installation is easy and straightforward,no special tools or modifications are needed.. Package IncludedPair of Drive Shaft Bumpers.

foy seadoo accessories bumpersfender pwc fender bumper. Fit on all watercraft, except seadoo GTI, GTI SE, GTR and WAKE PRO 2020. Requires Snap-in Fenders Installation Kit 295100550 or 295100729 to install on models other than SPARK. The applicable model is on the following details page, please pay attention to it..

Hull Protection These snap-in fenders provide impact cushioning, shielding your jet ski from scratches, dents, and paint scuffs, collisions while docking or being alongside other vessels. Bright Color Protection Their bright orange hue guarantees high visibility on the waterline and in storage, and if they fall off, they float for easy retrieval. Material Quality Constructed from high-density, UV-resistant plastic, designed to withstand harsh sun, saltwater, and repeated mechanical impact. Resistant to cracking, deformation, and fading. Ease of Installation The snap-in design allows tool-free mounting and removal, reducing installation time to a few minutes. Fitment Fenders kit Compatible with most Sea-Doo watercraft, and not fit for Sea-Doo Spark GTI, GTI SE GTR WAKE PRO 2020. Replacement Part Numbers 295100418 295100729.

All day durable material 295100418 295100729 Snap in BumpersSanders is made of waterproof, UV resistant, and seawater corrosion-resistant materials, which will not deform after long-term immersion. It can be used in freshwater or saltwater lakes to maintain its performance and appearance. . Super protection and collision free 295100418 295100729 Fenders is made of closed cell EVA foam with high density and quick rebound, which can effectively absorb collision energy and avoid damage to the hull caused by hard impact. Whether it is docking, berthing or transportation, it can provide buffering protection.. Convenient installation, flexible and versatile Fenders 295100418 295100729 is equipped with adjustable high-strength nylon straps and quick buckles, which can be easily fixed to the bow, side or stern of the ship without tools. The textured anti slip lining ensures stability and no displacement after installation, suitable for most kayak and small boat designs.. Silent berthing, upgraded experience 295100418 295100729 Snap in Bumpers effectively reduces the noise generated by the friction between the ship and the dock, making your departure and return more elegant and peaceful, and enjoying a harmonious water time.. Why do you need fenders When your beloved ship collides with docks, reefs, or other vessels, expensive hull coatings and materials can easily leave scratches, dents, or even damage. Our fenders 295100418 and 295100729 are like the bumpers of a ship, resolving every unexpected friction for you and significantly reducing maintenance costs and time.

ApplicationFit most watercraft, except for SeaDoo GTI, GTI SE, GTR, and WAKE PRO models 2020. TechnologyPrecision machining for accuracy and direct fit. Corrosion-resistant coating and rigorous testing for durability.. MaterialsMade of high-quality tear-resistant material, it has oxidation, rust resistance and corrosion resistance, high strength and durability.. InstallationEasy to install, if you encounter difficulties during the installation process, it is recommended that you have a professional installation.. After-salesIf You Have Any Questions, Please Feel Free To Contact Us, We Provide Timely Customer Support For All Buyers..

Upgraded Protection Our PWC fender bumpers are made of high-impact closed-cell foam, with an increased size of 14x6x3.2 inches, expanding the collision protection area, enhancing durability and impact resistance, it can better defend against scrapes and scratches from the dock, minimizing damage to the hull. Easy to Use A set of 2 fender bumpers comes with two elastic ropes and 2 dock ropes, which can be easily threaded through the designated hole, allowing us to safely attach and adjust fenders on a jet ski or boat. The heavy duty plastic U-shaped hooks installed on the bottom can grab the rail of the jet ski or ski board, which can keep fender stay in position and prevents accidental decoupling. So that our jet skis and boats can be securely docked at the dock. Easy to Store Our PWC Bumper can be folded into a smaller size and can be easily put into the storage box of our PWC, which is convenient for us to use when we need it. Perfect Fit and Good Protection The folding design of this PWC fender perfectly fits the radian of different parts of our boats, it can protect the upper and lower sides very well. This design can prevent the boat from being scratched and hit during docking, protecting the service life and original condition of our boats. Versatile Compatibility The upgraded fender bumper can be easily installed on the dock for convenient docking. It can fit different types of motorboats and boats well, providing maximum protection.

for Sea-Doo RXT, RXT-X, GTX and WAKE PRO 2018 and up FISH PRO 2019 and up Replacement295100729 For FISH PRO 155 2019 For FISH PRO 1702020. For GTX 155 2019 2018 For GTX 170 2020 For GTX 230 2019 2018 For GTX 300 2018. For RXT 2005-2007 For RXT 215 2008-2010 For RXT 230 2019 2018 For RXT 260 2011-2017 For RXT X 255 2008 2009 For RXT X 260 2011-2016 For RXT X 300 2016-2020 For Wake Pro 230 2018-2020. Upgraded to tear-resistant material.

Warranty and package- 2 years warranty offered by Affordura boat fender. The package contains 4x 5.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag.. Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear.. Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 35 seconds to inflate.. Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side.. Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..

Right Rear Corner Bumper for SeaDoo PWC. Replaces SeaDoo Part 291004279 291004153 291003065. Fits SeaDoo GTI 130 2011-2020 GTI SE 130 2011-2016 GTI Limited 155 2011-2018 GTI SE 155 2011-2019 GTI 90 2018-2019 GTS 90 2017-2018 GTS Rental 2011-2013 GTS 130 2011-2017 GTS 2014 Wake 155 2011-2019 RXP-X 260 2012-2015 RXP-X 300 2016-2020 GTR 215 2012-2016 GTR 230 2017-2019. OE Quality aftermarket replacement. Replacement screws are not included, Exact item pictured.

MAINTENANCE-FREE EVA FOAMCrafted from marine-grade EVA foam, these boat bumpers fenders need no inflation. Permanently buoyant and resistant to UV, saltwater, and oil, this material won't fade or crack. Unlike traditional inflatable options, it provides reliable, zero-maintenance protection without deflation risks.. INTEGRATED LOCKING SYSTEMThese boat fenders for docking feature a patented integrated locking system with automatic buckle for tool-free installation. The durable strap secures instantly to pilings or cleatsno knots needed. This modular dock bumper allows easy on-the-spot adjustment via the locking structure.. ENHANCED IMPACT ABSORPTIONThe reinforced multi-grid backing absorbs and evenly distributes collision force. This design provides superior cushioning compared to standard smooth-back boat dock bumpers, effectively protecting your hull and gunwale from scratches and dents caused by dock contact.. IDEAL SIZE FOR WATERCRAFTAt 17x8x4.3, these boat bumpers for docking fit various vessels. For optimal coverage use 2 for boats under 10ft, 3 for 10-20ft, add one per additional 10ft. This sizing ensures tailored protection for your specific watercraft with the right number of dock defenders.. VERSATILE INSTALLATIONThese yacht fender eva fender units include multi-strand elastic ropes and a sturdy threading buckle. This combination enables secure fastening to any dock edge or deck configuration. Whether for pontoon or bass boat, these boat fenders offer flexible options as reliable dock bumpers..

Strong and durable. Must be added to the XT rear bumper stock or accessory for full protection. Provides additional protection for your vehicle against obstacles. Protects the rear lights of the vehicle without obstructing them. Wide and sturdy tubular construction with black powder coat finish and metal corners.

Versatile Usage These dock bumpers are designed for a wide range of applications, making them ideal for use on docks, jet skis and boats up to 25 feet in length. They can function effectively as both dock bumpers and boat fenders, providing comprehensive protection.. Innovative Two-Part Design Dock corner bumpers engineered with a unique two-part design consisting of one large and one small component, these bumpers offer flexible use and ensure a seamless fit to either the boat or dock. This enhances both protection and stability, making them highly adaptable to different scenarios.. Sturdy Construction PWC Fenders crafted from high-impact closed-cell foam, these bumpers are exceptionally thick and impact-resistant. Their robust build ensures long-lasting durability and provides excellent protection against collisions, keeping your watercraft safe.. Easy Installation Designed for hassle-free installation, dock bumpers dock edge can be installed horizontally on a dock using screws.Alternatively,jet ski bumpers for docking allow you to easily attach ropes through the holes of the jet ski fenders for hanging, offering versatile mounting options. Wide Compatibility Suitable for a variety of settings, these upgraded PWC boat bumpers are compatible with various types of motorboats and small boats up to 25 feet in size. For optimal protection, it is recommended to use two bumpers for jet skis or one bumper for every 10 feet of boat length..

What You Get our boat fender set includes 2 pack white oval marine grade boat bumpers that inflates to protect your boat, ensuring you have the essential protection ready for small boats, pontoons, and boats whenever you hit the water. Size Information these boat fenders measure 15.75 x 4.33 inches 40 x 11 cm with a 0.91 inch 23 mm hole diameter and a buoyant 1.18 gallon 4.5 L volume and weighing approximately 17.637 ounce 500 g each This specific sizing ensures effective impact absorption without being overly bulky. Quality Materials our boat fenders for docking crafted from grade polymer boast to prevent air leakage and withstand strong impacts The boat buoy bumpers also resist uv light and minimize the risk of cracking or aging, even after prolonged exposure. Versatile Protection safeguard your boat with our boat fenders, designed to protect various types of boats from collisions and abrasions during docking and pontoon mooring The integrated double-molded hang eyes are reinforced for exceptional strength, providing secure attachment points that won't pull out under stress. Wide Application the boat bumpers fenders suitable for boats with lengths to 10 ft Frequently applied in pontoons, fishing boat, sport boats, day cruisers, sailboats, jet skis, and boats.

High-rise pylon keeps rope out of water for better watersport fun. Features built-in spotter grab handles and retracts out of the way when not in use. Note Never use the Ski Pylon to tow an inflatable tube or similar toy. Always use the rear cleat. Superseded From 295100863.

Perfect Fit 295100418 Fenders fits for Sea-Doo models, these bumpers deliver a flawless, snug fit that eliminates movement during high-speed rides or rough waters.. Premium Material 295100418 Snap in Bumpers made of high-quality materials, it has excellent elasticity and rebound recovery performance, effectively absorbing and dispersing impact energy to provide strong cushioning protection for the hull. Ensures long-lasting durability in harsh marine environments.. Professional Protection, Peace of Mind 295100418 Snap-in Fenders designed specifically for jet skis, these snap-in bumpers provide reliable impact absorption during docking or mooring, effectively preventing scratches, dents, and damage to your watercraft.. Superior Impact Absorption, Enhanced Safety 295100418 Snap in Fenders Acts as a high-resilience protective cushion, absorbing shock during docking to minimize direct impact. Safeguards your jet ski and reduces jolts for passengers.. Enhanced Protection Bumper 295100418 securely attaches to your jet ski, delivering exceptional impact and scrape resistance. Seamlessly integrates with your watercraft's contours to preserve its pristine surface and long-term value.. High-Visibility Bright Orange The 295100418 bumpers vibrant orange color not only enhances the aesthetic appeal but also improves visibility on the water. Makes it easier to spot in crowded docking areas and enhances safety in crowded docking areas. Easy installation Designed for hassle-free installation After installing part number 295100729, Simply replace your original part 295100418. Note Non-SPARK models require installation kit 295100550, 295100729, or 295100944. Compatible with most Sea-Doo watercraft models. Important Not compatible with GTI, GTI SE, GTR series, or 2020 WAKE PRO models..

Perfect Fit 295100418 Fenders fits for Sea-Doo models, these bumpers deliver a flawless, snug fit that eliminates movement during high-speed rides or rough waters.. Premium Material 295100418 Snap in Bumpers made of high-quality materials, it has excellent elasticity and rebound recovery performance, effectively absorbing and dispersing impact energy to provide strong cushioning protection for the hull. Ensures long-lasting durability in harsh marine environments.. Professional Protection, Peace of Mind 295100418 Snap-in Fenders designed specifically for jet skis, these snap-in bumpers provide reliable impact absorption during docking or mooring, effectively preventing scratches, dents, and damage to your watercraft.. Superior Impact Absorption, Enhanced Safety 295100418 Snap in Fenders Acts as a high-resilience protective cushion, absorbing shock during docking to minimize direct impact. Safeguards your jet ski and reduces jolts for passengers.. Enhanced Protection Bumper 295100418 securely attaches to your jet ski, delivering exceptional impact and scrape resistance. Seamlessly integrates with your watercraft's contours to preserve its pristine surface and long-term value.. High-Visibility Bright Orange The 295100418 bumpers vibrant orange color not only enhances the aesthetic appeal but also improves visibility on the water. Makes it easier to spot in crowded docking areas and enhances safety in crowded docking areas. Easy Installation Designed for easy installation After installing part number 295100729 must be purchased separately, simply replace the original part number 295100418.. Note Non-SPARK models require installation kit 295100550, 295100729, or 295100944. Compatible with most Sea-Doo watercraft models. Important note Not compatible with GTI, GTI SE, GTR series, or 2020 WAKE PRO models..

Fits 14 - 12 fender lines, Rails up to 1. Fendergrip will help you set up, adjust and use your fenders more effectively.. Instantly adjust the height of your fender with a push of a button,with a positive lock to hold the line in place.. Stainless steel screws and internal spring, Durable and long lasting. For detailed dimensions, please see the picture on the left, applicable to any boat..

Replace Part Number 291002244 291001505 291001975 291001304 291001571 291000999. Products include 2 Pack 291002244 Rear Bumper Corner Cap. Compatible with Sea-Doo Boat X RXP Wake GTX GTI RXT PRO SE Series Model. Fits for Model 1997 XP, 1998-1999 XP GTX GSX Limited, 1998-2002 GTX RFI, 1999-2001 GS, 1998-2005 GTI GTI LE RFI, 2000-2001 LRV, 2000-2002 RX XP, 2000-2003 RX D GTX DI, 2003-2004 XP DI, 2003-2006 GTX 4-TEC, 2006-2007 GTI RENTAL SE STD, 2007 GTI 4-TEC SE NA STD LTD WAKE RXP NA RXT BVIC, 2008-2009 GTX 155 215 RXP 215 RXT 215, 2008 GTX LTD 215 RXP 155 WAKE 215, 2009 WAKE PRO 215, 2011 GTS PRO 130, 2008-2010 GTI RENTALSE 130 135, 2008-2011 RXP X 255 RXT X 255, 2008-2010 WAKE 155. Quality Designs Crafted From High-Quality Materials, This Bumper Corner Cover Is Robust, Durable, And Corrosion-Resistant for Extended Service Life. It Minimizes Impact Damage To Your Boat'S Hull, Providing Superior Protection. Its Sleek Black Finish Offers An Elegant And Stylish Appearance. Please Check The Product Size and Product Serial Number Carefully Before Purchase to Avoid Wasting Your Valuable Time.

Easy to installSnap-on design for quick installation and removal without professional tools, suitable for DIY users.It is recommended to use with the parts to be able to increase the service life. Tear-resistant material Made of high quality tear-resistant material to ensure long-term use without breakage, especially suitable for water sports environment. Wide compatibility Designed for Sea-Doo GTI, GTR, Wake 170 2020 and later and RXP-X 2021 to ensure perfect fit. Protective Provides extra protection against hull damage in the event of a collision, increasing the safety of water play. Bright Color The orange design is not only aesthetically pleasing, but also enhances visibility and safety.

Compatible with Sea-Doo RXT, RXT-X, GTX and WAKE PRO 2018 and up FISH PRO 2019 and up Replacement295100729 Not required for SPARK models. Perfectly match with the bumpers, can fix the protective bumpers firmly, support to reduce the impact of hits on your boat to the maximum extent, protect you boat better. Made of High Density PolyethyleneHDPE, durable and reliable, with good impact resistance and corrosion resistance, working in all weather conditions. A must have if you want your boat to remain in as best condition as possible, let you enjoy the pleasure of yachting. Easy to install Package included 2PCS snap-in fenders and installation manual.

Compatibility Our PWC bumpers are meticulously designed to compatible with all yamaha jet skis and waverunners. Ensure that reliable protection can be provided for all yamaha models with the jetski bumpers for docking. Note Not compatible with other brands of jet skis or waverunners. Efficient Protection Engineered with exceptional shock absorption capabilities, our jet ski bumpers for docking serve as a robust barrier against potential damage caused by collisions with watercraft, docks, or any other obstacles in the water. By effectively buffering impacts, they safeguard your PWC from expensive repairs and maintain its pristine condition. Easy Installation Simplify the installation process, our package already includes everything necessary for installation 2 PWC fenders, 2 tethers, and 2 suction cups. With no additional tools required, you can quickly attach the waverunner accessories to the crash bar of your PWC, ensuring hassle free protection whenever you need. Durable Construction Crafted from premium materials, our waverunner bumpers fenders possess excellent corrosion resistance and wear resistance. They are specifically engineered to withstand the harsh marine environment and prolonged exposure to sunlight without compromising their integrity. This durability ensures long lasting reliability and peace of mind for your investment in the jet ski accessories. Adjustable Pressure Adopt inflation and deflation design allows for effortless adjustment pressure of the jetski bumpers. This feature enables you to customize protection levels based on your specific requirements, ensuring efficient performance in various water conditions.

Compatible with Sea-Doo 1997 XP 1998-2005 GTI GTI LE GTI LE RFI 1998-1999 XP Limited 1998-1999 GTX Limited 1998-2002 GTX RFI 1999 GSX Limited 1999-2001 GS 2000-2003 GTX DI 2000-2001 LRV 2000-2002 RX 2000-2003 RX DI 2000-2002 XP 2003-2004 XP DI 2003-2006 GTX 4-TEC 2006-2007 GTI RENTAL 2006-2007 GTI SE 2006-2007 GTI STD 2007 GTI 4-TEC SE NA 2007 GTX LTD BVIC 2007 GTX STD AND WAKE 2007 GTX WAKE BVIC. Compatible with 2007 RXP BVIC 2007 RXP NA 2007 RXT BVIC 2008-2010 GTI 130 2008-2010 GTI RENTAL 130 2008-2010 GTI SE 130 2008-2010 GTI SE 155 2008-2009 GTX 155 2008-2009 GTX 215 2008 GTX LTD 215 2008 RXP 155 2008-2009 RXP 215 2008-2011 RXP X 255 2008-2009 RXT 215 2008-2011 RXT X 255 2008-2010 WAKE 155 2008 WAKE 215 2009 WAKE PRO 215 2011 GTS PRO 130 Replace 291002244 291000999 291001571 291001304 291001505. Perfectly match with your boat, the corner bumper supports to reduce the impact of hits on your boat to the maximum extent, protect you boat better A must have if you want your boat to remain in as best condition as possible, let you enjoy the pleasure of yachting. Made of High Quality PP Plastic, durable and reliable, with good impact resistance and corrosion resistance, working in all weather conditions. Easy to install Package included 2PCS Corner Bumper Note Does not include plugs and rivets .

SIMPLIFIES PWC DOCKING AND ANCHORING - Struggling to dock your Jet Ski and secure docking bumpers, fenders, or anchoring lines Our soft loop tie-down straps provide secure and reliable anchor points, making docking and securing your PWC accessories effortless.. KEEPS YOUR JET SKI ACCESSORIES WITHIN EASY REACH - Store your PWC accessories conveniently by adding a soft loop to your front storage compartment. No more digging through your Jet Ski frunk to find your docking bumper, tie-down strap, or bungee dock rope when you need it.. SOFT AND DURABLE STRAP LOOPS - Our soft loop straps contain no metal parts that could rust or scratch your watercraft. Made from durable polypropylene webbing, they repel water and offer high resistance to Salt, UV rays, and sunlight exposure, ensuring a long lifespan.. ASSORTED SIZES FOR UNIVERSAL COMPATIBILITY - Connects to any existing external bolt on your Jet Ski. Just unscrew the existing bolt, thread it through the hole at the end of the soft loop ensuring the washer is on top, and screw it back into place. Includes 7 assorted size loops for best compatibility.. CONFIDENCE PEACE OF MIND - Engineered for reliability and durability, our tie-down straps are specifically designed for PWC use in harsh marine conditions so you can secure your watercraft with confidence. Backed by our generous 3-Year Hassle-Free Replacement Warranty..

PREMIUM PROTECTION - Crafted from robust EVA foam, our Boat Fenders offer complete cushioning, effectively absorbing and dispersing collision forces They excel in UV and seawater resistance, ensuring superior protection The addition of durable polyester straps facilitates easy and secure fastening to the dock or deck These reliable defenses provide boat owners with peace of mind. SIMPLE INSTALLATION - Utilizing locks, the strap easily attaches to the boat dock or deck Designed with a modular structure, the installation and removal processes are convenient Boat owners can effortlessly adjust it as needed using cables and locking structures. BOAT FENDER SIZE - The VIVOHOME Boat Fender measures 16.3 x 7.5 inches, catering to a diverse range of boat sizes Generally, boats under 10 feet typically require 2 fenders, while those between 10 to 20 feet typically need 3 fenders Following this analogy, it is recommended to add one extra fender for every 10 feet increase in boat length to ensure complete protection. VISUAL APPEAL - Beyond providing protection, our Boat Fenders elevate the aesthetic of your watercraft Offered in black, gray, and blue, these fenders not only ensure functionality but also enhance the visual appeal of your boat, marrying style with practicality. VERSATILE USE - The innovative design seamlessly caters to a variety of boat sizes and styles, including yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats Beyond delivering top-notch protection, these fenders also elevate the overall aesthetic of your boat, combining functionality with style.

Designed to fit the profiles of MOST personal watercrafts PWC in which the underside of the bond flange is open to allow the fender to hook. Not a custom fit fender, will provide differing fits depending on year, make or model. Fender bottom is shaped to hook under the bond flange for quick attachment. Flex areas on the fender provide a hinge action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment. Includes a suction cup and securing line. Use only at slow speed for docking, not for use under full speed.

Complete Snap-in Bumper Set Includes 1 set of red rubber mudguards designed specifically for RXT-X and PRO models excluding GTI, SE, GTR, and 2020 PRO variants verify OE part numbers 295100418 and 295100729 before ordering.. Direct Replacement Fit Engineered to install seamlessly into original mounting points without modification-replaces damaged or worn bumpers on compatible watercraft with precise alignment and secure hold.. LONGLASTING Rubber Construction Made from resilient rubber material that resists cracking, UV degradation, and damage during high-speed water sports and frequent trailering.. Model-Specific Design Tailored exclusively for RXT-X and select PRO series pre-2020, insure optimal coverage around the rear hull and protection against debris, spray, and accidental contact.. Color-Matched Visual Appeal Features bold red coloring that complements factory styling while enhancing visibility and sporty aesthetics on the water..

MAXIMUM DOCKSIDE PROTECTION Designed as premium boat fenders, this innovative hanging system positions protection both above and below the rub rail, helping shield your hull from dock impact and scratches during docking. HULL-HUGGING CONTOUR FIT Unlike traditional round fenders, the angled design works like a flat boat fender, aligning naturally with your boats shape to reduce slipping and improve coverage along the hull. ADVANCED CLOSED-CELL FOAM MATERIAL Built with high-performance molded foam used in marine bumpers for boats, offering exceptional durability, UV resistance, and water-repellent protection that wont fade or absorb moisture. FAST INSTALLATION NO KNOTS REQUIRED The integrated strap system creates convenient boat docking accessories that attach quickly to cleats or rails, eliminating complicated ropes and making setup effortless. VERSATILE MARINA DOCK USE Ideal as dock fenders or protective boat docking bumpers, these fenders help safeguard your boat during mooring, rafting, or storage at marinas and lakeside docks.

LONG-LASTING MATERIAL Ribbed boat fenders for docking bumpers is made of high quality grade UV-resistant PVC, the marine ribbed Inflatable Fender comes with ribbed on all sides for extra protection.. FEATURES Inflatable ribbed boat fenders 4 pack feature great buffer effect, the twin eyes boat fender help to protect boats and dock from damage caused by the heavy collision between hard surfaces.. SCIENTIFIC DESIGN Inflatable ribbed marine fenders eyelets is integrated with the body, boat bumper 4 pack can hung vertically or horizontally, help the boat bumpers fenders attach to boat firmly.. WHAT YOU GET 4 Pack ribbed boat fenders 4.5'' x 16'' boat fenders, 4 inflating needles, 4 fender ropes 6.5ft length and 1 hand pump, available whiteblackblue boat bumpers for docking fenders 4 pack white. MULTI USAGEThis Boat Fender Bumper is perfect for docks, yachts, sailboats, row boats, ski boats, canoes, pontoons, fishing boats, buoys, etc..

IP68 Certified Waterproof Protection A 3.3 feet1 meter IP68 certified professional floating waterproof phone pouch is perfect for swimming pools, beach, kayaking, fishing, surfing, sailing, skiing, boating, snorkeling, tubing, rafting, showering, sauna, other water park activities and to store your ID This waterproof pouch will keep your phone full functional and 100 protected from water making it one of the best cruise, vacation and travel essentials accessories to have Best for Phone Screen Sizes Up to 6.1 Inches. Precise Design Sensitive Touch Pelican Marine Series waterproof case has an innovative design for easy access to side buttons Made with high-quality soft TPU material and a Clear Window design on the front for delicate touch and quick response making it easy to see videos and check your email. Fully Protective This phone pouch comes with a detachable cell phone lanyard that can be worn around your neck or wrist to easily access your phone or ID, allowing you to enjoy your adventures to the fullest Secure Lock Mechanism allows you to firmly lock and unlock the phone pouch, keeping it completely sealed underwater. Underwater Photography Take pictures anywhere, anytime With the transparent material, you can have direct and proper access to the touch screen and camera Sensitive touch allows you to use your phone as an underwater camera, to take sharp and clear photos and videos without removing your device from the waterproof phone bag. Package Contents 2 Unit of Pelican Waterproof Phone Pouch Floating Case - Marine Series Black Regular Size 2 Detachable Keychain Lanyard - Hi-Vis Yellow 1-Year Warranty.

PROTECTS YOUR PWC FROM DOCK DAMAGE - Designed to shield your personal watercraft from dock rash, scratches, and impact during everyday docking. Each bumper is molded from one-piece EVA foam that absorbs contact instead of transferring it to your hull. The widened lower impact zone provides added coverage where PWCs most commonly make contact with docks, pilings, and other vessels, delivering more consistent protection than narrow rope-hung or traditional cylindrical fenders.. TENSIONED DESIGN PREVENTS FENDER SHIFTING - Features an integrated bungee that creates constant upward tension, helping keep the bumper securely attached. Combined with the molded bottom U-hook that anchors under the rub rail, the tensioned system helps reduce movement caused by wakes, wave action, or repeated dock contact, keeping the fender properly aligned instead of sliding, twisting, or drifting out of place like traditional hang-down fenders.. EASY TO ATTACH, MULTIPLE MOUNTING OPTIONS - Features an adjustable multi-loop strap with an included composite S-hook, allowing you to fine-tune mounting height based on your jet ski setup. Connect directly to the bundled soft loop cleats mounted to factory bolts, or wrap the strap around secure points and reconnect it back to the S-hook. This flexible system provides more attachment options than traditional single-strap fenders.. INTERLOCKING DESIGN FOR COMPACT STORAGE - Two bumpers interlock together and are secured by the built-in bungees to form one compact unit for easy storage inside your PWC. This helps prevent separation, rattling, or loose gear in your storage compartment, making the fenders easier to stow, transport, and quickly redeploy compared to traditional loose fenders.. CONFIDENCE AND PEACE OF MIND - Engineered for long-term performance in harsh marine environments. Designed for real-world usability, quality, and innovation. Backed by our 3-Year replacement warranty, you can rely on..

PROTECTS YOUR PWC FROM DOCK DAMAGE - Designed to shield your personal watercraft from dock rash, scratches, and impact during everyday docking. Each bumper is molded from one-piece EVA foam that absorbs contact instead of transferring it to your hull. The widened lower impact zone provides added coverage where PWCs most commonly make contact with docks, pilings, and other vessels, delivering more consistent protection than narrow rope-hung or traditional cylindrical fenders.. TENSIONED DESIGN PREVENTS FENDER SHIFTING - Features an integrated bungee that creates constant upward tension, helping keep the bumper securely attached. Combined with the molded bottom U-hook that anchors under the rub rail, the tensioned system helps reduce movement caused by wakes, wave action, or repeated dock contact, keeping the fender properly aligned instead of sliding, twisting, or drifting out of place like traditional hang-down fenders.. EASY TO ATTACH, MULTIPLE MOUNTING OPTIONS - Features an adjustable multi-loop strap with an included composite S-hook, allowing you to fine-tune mounting height based on your jet ski setup. Connect directly to the bundled soft loop cleats mounted to factory bolts, or wrap the strap around secure points and reconnect it back to the S-hook. This flexible system provides more attachment options than traditional single-strap fenders.. INTERLOCKING DESIGN FOR COMPACT STORAGE - Two bumpers interlock together and are secured by the built-in bungees to form one compact unit for easy storage inside your PWC. This helps prevent separation, rattling, or loose gear in your storage compartment, making the fenders easier to stow, transport, and quickly redeploy compared to traditional loose fenders.. CONFIDENCE AND PEACE OF MIND - Engineered for long-term performance in harsh marine environments. Designed for real-world usability, quality, and innovation. Backed by our 3-Year replacement warranty, you can rely on..

PROTECTS YOUR PWC FROM DOCK DAMAGE - Designed to shield your personal watercraft from dock rash, scratches, and impact during everyday docking. Each bumper is molded from one-piece EVA foam that absorbs contact instead of transferring it to your hull. The widened lower impact zone provides added coverage where PWCs most commonly make contact with docks, pilings, and other vessels, delivering more consistent protection than narrow rope-hung or traditional cylindrical fenders.. TENSIONED DESIGN PREVENTS FENDER SHIFTING - Features an integrated bungee that creates constant upward tension, helping keep the bumper securely attached. Combined with the molded bottom U-hook that anchors under the rub rail, the tensioned system helps reduce movement caused by wakes, wave action, or repeated dock contact, keeping the fender properly aligned instead of sliding, twisting, or drifting out of place like traditional hang-down fenders.. EASY TO ATTACH, MULTIPLE MOUNTING OPTIONS - Features an adjustable multi-loop strap with an included composite S-hook, allowing you to fine-tune mounting height based on your jet ski setup. Connect directly to the bundled soft loop cleats mounted to factory bolts, or wrap the strap around secure points and reconnect it back to the S-hook. This flexible system provides more attachment options than traditional single-strap fenders.. INTERLOCKING DESIGN FOR COMPACT STORAGE - Two bumpers interlock together and are secured by the built-in bungees to form one compact unit for easy storage inside your PWC. This helps prevent separation, rattling, or loose gear in your storage compartment, making the fenders easier to stow, transport, and quickly redeploy compared to traditional loose fenders.. CONFIDENCE AND PEACE OF MIND - Engineered for long-term performance in harsh marine environments. Designed for real-world usability, quality, and innovation. Backed by our 3-Year replacement warranty, you can rely on..

Direct Snap-in Replacement Installs quickly without tools by snapping securely into place on compatible RXT-X and PRO models excluding GTI, SE, GTR, and 2020 PRO variants verify OE part numbers 295100418 or 295100729 before ordering.. FIRST-RATE Rubber Construction Made from LONGLASTING rubber engineered to absorb , resist cracking, and maintain flexibility in varying water and air temperatures.. Optimized Fit for RXT-X Models Precision-molded to match original contours-provides clean coverage over wheel wells and enhances the aggressive look of performance personal watercraft.. High-Visibility Red Finish Bold red color improves visual contrast against hulls and aids in quick identification during maintenance or on-water inspections.. Model-Specific Compatibility Designed exclusively for select RXT-X and earlier PRO series pre-2020 NOT suitable for 2024 or 2025 models-ALWAYS CONFIRM YOUR MODEL YEAR AND OE PART NUMBER BEFORE ORDERING..

SKU 291004277. Sold Each. Please verify your own fitment.

Protect your investment from dock damage with these easy to install and remove fenders designed specifically for Sea-Doo watercraft. Front and rear on the SPARK models ensure a solid mount in the optimal spot. The Snap-in Fenders float and the high-visibility orange color keeps them in sight. Patent pending. Sold in pairs. Requires Snap-in Fenders Installation Kit 295100550, 295100729 or 295100944 to install on models other than SPARK.

Package Content- The package contains 2x PWC fenders for Jet ski, Yamaha, Waverunner, Kawasaki, 2x 18.5 inch elastic cords.. Useful Elastic cords- Throw the other ropes, replace them with the attached elastic cords to keep PWC bumper fenders in place. Easy to use and adjust, 18.5 inch length is suitable for all kinds of PWC.. Easily storage- Instead of the smaller PWC bumper pad, Affordura update to the larger size 14x6x3.2 inch. Thick enough to protect the sides of the boat while docked even in rough waters, small enough that they stow easily under the front of ski hatch when not in use.. Quickly install- Install in seconds, just on and off. The hook on the back of PWC fender guards grabs the rail of the ski and you can pull it nice and tight so it doesnt move, made of heavy duty plastic rather than rubber coated metal to minimize scratching on the jet ski.. Well protection- Save the PWC from scratches and prevents it from bumping directly into the dock side. Fold design allows PWC bumper guards to sit on the rail of the PWC so that it can protect both the upper and lower side..

HEAVY-DUTY MARINE-GRADE MATERIAL Our boat fenders are constructed with double-reinforced seams and 1280D marine-grade PVC, ensuring exceptional durability and resistance to abrasion and tears. Each fender is thermally sealed and welded inside and out, providing superior protection for your valuable pontoon boats, yachts, and sailboats. This material is designed to withstand exposure to oil, gasoline, and sunlight, enhancing the fender elasticity and resistance to wear and corrosion. CONVENIENT AND VERSATILE USE These inflatable boat fenders are designed for easy use and versatility. They can be inflated with any standard hand or electric pump not included, including those used for paddle boards. Featuring 2 D-rings for secure attachment, these fenders are perfect for docking and mooring, and they simplify connecting with other vessels. When not in use, they deflate and fold for compact storage, making them ideal for large and extra-large boat fenders. COMPLETE SET FOR YOUR NEEDS Our boat fenders come in a complete set, sized at 10ft High x 18inches Diameter. The set includes two nylon dock lines, a repair kit, and a storage bag. This comprehensive package ensures you have everything you need for a seamless docking experience, making it perfect for boat fenders for docking and boat bumpers for docking. ENHANCED SAFETY AND PROTECTION Our inflatable fenders provide excellent protection in stormy weather, reducing the impact of collisions with docks or other boats. These heavy-duty, durable fenders are built to last, offering peace of mind during your boating adventures. They are ideal for inflatable boat fenders, deep horizontal laminated dock bumpers, and rectangular inflatable boat bumpers.. EXCELLENT CUSTOMER SERVICE Customer satisfaction is our top priority. If you need assistance, please follow these steps Go to Your Orders, find your order in the list, select Problem with order, choose your topic from the list displayed, and then select ''Contact seller''. We're devoted to delivering solutions that meet your needs and offering expert assistance to enhance your experience.

Innovative Patented Product The Boat fender boasts a sleek, streamlined exterior design inspired by fashionable sports cars. These boat dock bumpers are made from sturdy and environmental EVA material, providing excellent impact resistance and ensuring safety and reliability during docking. Easy installation Unlike traditional boat fenders that require knots, AWEMUFA Boat Fender innovative design makes it easy to install without knots, and the wedge-shaped design prevents bouncing during use, ensuring the fender stays in place. Integrated locking system Our extra-long straps are not only easy to use but also have an integrated automatic locking system that securely fastens the fender to the dock or deck without the need for complicated knots. Suitable size The AWEMUFA boat fenders measured as 17.12 inches 8.27 inches. To get the best protection, we recommend adding a fender for every 10 feet of boat length. For boats under 30 feet, at least three fenders are needed. AWEMUFA boat bumper is suitable for various types of boats, such as yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats. We recommend choosing the number of fenders based on the boat size to provide better protection. After-sales service AWEMUFA's excellent and innovative quality continuously drives our development, and our perfect service guarantees customer satisfaction. We promise to provide excellent service for every buyer. If you encounter any problems while using our products, please let us know immediately and we will do our best to solve them immediately.

2-Pack Calvana PWC Jet Ski Bumpers Boat Fenders with 2 Elastic Cords, 2 Dock Ropes. Versatile Installation The upgraded fender bumpers can be easily installed on the dock for boats to dock, making them suitable for various scenes. They are compatible with different types of motorboats and small boats. Perfect Fit and Protection The fender bumpers provide a seamless fit to the varying contours of your boat, effectiPerfect Fit and Protection The fender bumpers provide a seamless fit to the varying contours of your boat, effectively preventing scratches when docked. They safeguard the longevity and pristine condition of your watercraftvely preventing scratches when docked. They safeguard the longevity and pristine condition of your watercraft. Durable and High-Impact Protection The fender bumpers for docking are made of thick, durable, high-impact closed-cell foam. This material offers superior protection compared to ordinary conventional fenders. It is impact-resistant, has a certain degree of elasticity, and is safe and leak-proof. Easy to Use and Store The fender bumpers provide all-around protection and are designed for easy installation. They can be conveniently stored when not in use. Additional Elastic Cords and 2 Boat Dock Rope A set of 2 fender bumpers comes with two additional Elastic Cords with adjustable lengths and anti-slip locking buckles. These cords provide added flexibility for securing the bumpers to your boat. Additionally, the included 2 Boat Dock Rope ensures secure docking, making it easy to keep your boat snug against the dock.

Compatibility Our PWC bumpers are meticulously designed to compatible with all yamaha jet skis and waverunners. Ensure that reliable protection can be provided for all yamaha models with the jetski bumpers for docking. Note Not compatible with other brands of jet skis or waverunners. Efficient Protection Engineered with exceptional shock absorption capabilities, our jet ski bumpers for docking serve as a robust barrier against potential damage caused by collisions with watercraft, docks, or any other obstacles in the water. By effectively buffering impacts, they safeguard your PWC from expensive repairs and maintain its pristine condition. Easy Installation Simplify the installation process, our package already includes everything necessary for installation 2 PWC fenders, 2 tethers, and 2 suction cups. With no additional tools required, you can quickly attach the waverunner accessories to the crash bar of your PWC, ensuring hassle free protection whenever you need. Adjustable Pressure Adopt inflation and deflation design allows for effortless adjustment pressure of the jetski bumpers. This feature enables you to customize protection levels based on your specific requirements, ensuring efficient performance in various water conditions. Durable Construction Crafted from premium materials, our waverunner bumpers fenders possess excellent corrosion resistance and wear resistance. They are specifically engineered to withstand the harsh marine environment and prolonged exposure to sunlight without compromising their integrity. This durability ensures long lasting reliability and peace of mind for your investment in the jet ski accessories.

PWC Boat Fender Kit The motorboat bumpers Kit includes 2 black PWC fender, 2 elastic cords, and 8 different sized motorboat cleats, featuring a full set of accessories for boat fenders If you're looking for a reliable solution to prevent your boat from hitting docks or other boats, this PWC bumper is ideal. Versatile Installation boat fenders for docking are suitable for a variety of scenarios, compatible with various types of motorboats or small boats under 25 feet, and can also be installed on docks for boats to dock NOTE Use two bumpers on motorboats and one bumper every 10 feet on the boat. Ideal Fit The motorboat bumpers for docking consists of two parts, the folding design can be applied flexibly, seamlessly fit the different contours of your boat and prevent scratching while docking, protecting the longevity and pristine condition of your motorboat. Reliable Materials The PWC bumper fenders are made of marine grade, tear resistant, triple layered gland with a closed cell foam interior, 14.69 x 5.91 x 3.15 inch PWC bumper guards have a larger contact area Adjustable length elastic cord with non slip locking clips to secure fenders in place and prevent accidental unhooking. Easy to Use and Store Use the included rope to thread the PWC contour fender's hole to hang the motorboat fender and secure it securely in place on your motorboat The rope is long enough to adjust to various positions, providing all round protection Motorboat bumper folds and dimensions compatible with all types of motorboat front hatches for easy storage.

Sturdy Design Ehaho boat fenders feature a stylish X-shaped design with a sturdy multi-grid support structure on the back. This structure evenly distributes force to absorb and dissipate impact, providing reliable protection against scratches and damage during docking. The four-hole and double-handle design allows for both vertical and horizontal hanging, ensuring easy installation on boats or docks. Material Reliable Protection Made from premium EVA material, no need to inflate. Resistant to UV rays and seawater corrosion, they provide long-lasting durability and stability, effectively absorbing and dissipating impact forces. Compared to PVC, they are more hard-wearing, sustainable, and better for preserving the marine ecosystem. Easy to Use Featuring an integrated locking rope, installation and removal are quick and simple, with no need for complicated knotting. The reinforced extra-long nylon rope is easily adjustable to different heights, adapting to various docking environments. Size Guide Ehaho extended-length boat fender, measuring 17.2 L x 8.1 W x 4.5H, making it ideal for boats ranging from 15 to 25 feet. For optimal protection, we recommend using one fender for every 10 feet of boat length. For boats under 30 feet, deploy at least three fenders to ensure full coverage and safety. Wide Range of Applications These boat fenders are ideal for a wide variety of watercraft, including bass boats, pontoon boats, bowriders, deck boats, ski boats, jon boats, small fishing boats, and yachts. Designed to protect your boat's gunwale and hull, they provide reliable cushioning during docking. Whether in calm waters or more challenging conditions, these fenders keep your boat safe from impacts, ensuring long-term protection in all environments..

UPGRADED AND INNOVATIVE The Ehaho pwc fender boasts a sleek, streamlined exterior design inspired by fashionable modern watercraft. These pwc bumpers are made from sturdy and environmental material, providing excellent targeted impact protection and ensuring safety and reliability during docking or tying up alongside other watercraft. RUGGED GRADE FOAM DEFENSE Unlike hard plastic versions, these won't dig into your skin or scrape you up if there's sand on them. Built from premium non marking closed cell EVA foam, these pwc dock bumpers absorb impact while resisting UV exposure and water damage, which can keep your PWCs finish clean and protected and neatly for convenient onboard storage. WIDER IMPACT SURFACE AND CUSTOM COLOR MATCH Our PWC fenders provide a broader impact zone than traditional designs for superior dock and hull protection. Available in multiple color options to perfectly match your watercraft, combining enhanced safety with a seamless, personalized look. EASY INSTALLATION Unlike traditional pwc fenders that require knots, Ehaho pwc fender bumpers innovative design makes it easy to install without knots. These jet ski bumpers for docking stay firmly in place to protect against dock impact, scratches, and contact with nearby boats at marinas, sandbars, and crowded docks. PERFECT FOR MOST PWC Ehaho pwc fenders are suitable for various types of pwcs, which are compatible with Sea-Doo, WaveRunner, Jet Ski, these are perfect for a Personal Water Craft PWC or in our case, a small 11-foot shallow skiff. The fit is excellent and surprisingly universal.

This heavy-duty commercial grade dock bumper is great for commercial marinas and personal docks. Cover is crafted from high-quality UV and tear resistant vinyl and polyester tri-laminate and filled with high-density closed-cell foam. Corrosion-proof stainless steel grommets are spaced along the full length of each bumper for secure mounting to the docks edge. Dock bumper provides optimal protection from anything that could scratch, dent, or nick your boat. Great for mounting to docks, posts and boats, this padded bumper measures 48 x 8 x 6-inches.

Designed for Jet Ski Protection These snap in bumpers provide reliable impact absorption, preventing scratches, dents, and damage to your jet ski when docking or mooring. Impact Protection These snap in fenders act as a protective cushion, absorbing shock during docking and reducing the risk of direct impact. They help safeguard both your jet ski and passengers by minimizing sudden jolts and collisions. Premium Material Made from high-quality rubber, these snap in fenders are resistant to aging, corrosion, and high temperatures. Their durable construction ensures long-lasting performance in marine environments. Enhanced Visibility The jet ski fenders feature a vibrant orange color, improving visibility on the water. This makes it easier to spot your watercraft and enhances safety in crowded docking areas. Quick Installation These jet ski bumpers are designed for a snap-in installation. Simply replace 295100418 295100729 model, ensuring fit for Sea-Doo most watercraft Not fit for GTI, GTI SE, GTR, and WAKE PRO 2020.

Patent Design The ergonomic design and environmental materials make our boat fenders for docking different. As an additional safeguard against wear, we add the reinforced nylon ropes with a fixed buckle, the lock parts offering more protection and durability than traditional pontoon boat dock bumpers, especially in stormy weather.. Strong Protection These boat dock bumpers are molded in a cross-linked closed-cell foam that is extremely long-lasting, it wont degrade during prolonged exposure to the sun. The extra-long strap is easy to loop over higher attachment locations, and the dock bumpers will keep your boat from getting scratched and damaged when tied up at the dock and around other boats.. Fast Installation An integrated strap easily attaches to the boat dock, just attach and lock. Locks will facilitate the rapid installation of your boat bumpers fenders.. Size Choosing kemimoto boat fender for docking size 17in length 8in dia. Intended for use with boats 15-25 feet long, we suggest you use one for every 10 feet of boat length, for boats under 30 feet, deploy no less than three fenders.. Wide Applications Kemimoto dock corner bumper will be a good fit for most bass boats, pontoon boats, ski boats, jon boats, small fishing boats, and bow riders with low freeboards, will benefit from a set of compact fenders, as they are designed to protect the gunwale as well as the hull..

Marine-Grade Shock Absorption Crafted with cross-linked polyethylene foam for superior durability and impact resistance, protecting your jet ski or PWC from scratches, dings, and collisions. Precision Fold-Fit Mechanism Engineered to seamlessly conform to hull contours, ensuring a perfect fit and maximum coverage against waves and dock impacts. Ultra-Stable Secure Attachment Reinforced bottom hooks latch securely into jet ski rail grooves, while pre-stretched bungee cords keep fenders tightly in place, even in rough waters. Quick Effortless Installation Designed for fast, hassle-free setupattach and adjust fenders in seconds without compromising stability or performance. Wave-Resistant Performance Advanced bungee cord design eliminates slippage and movement, maintaining constant hull protection during rides or docking.

Versatile SizingOur jet ski bumpers are available in two distinct sizes to accommodate a variety of motorboats and small boats under 15 feet in length. For optimal protection, we recommend using two bumpers on a jet ski or one bumper every 10 feet on larger boats. Tailored DesignThese PWC fenders are uniquely composed of two segmentsa larger and a smaller oneallowing for exceptional adaptability and a perfect fit along the contours of your jet ski. This design ensures comprehensive protection against scratches and impacts during docking. Superior ProtectionCrafted from high-impact closed-cell foam, our jet ski fenders offer enhanced durability and resistance against impacts. The materials elasticity helps absorb shocks effectively, outperforming standard fenders to keep your watercraft safe and intact. Hassle-Free InstallationEach pwc bumper comes equipped with a long, durable rope designed to easily thread through a designated hole, allowing you to securely attach and adjust the fender on your jet ski or boat. This setup provides reliable, all-around protection without complications. Convenient Storage Trusted SupportOur compact jet ski bumpers are designed to fit effortlessly within the front hatches of various motorboat types, ensuring easy storage when not in use. At KEMIMOTO, your satisfaction is our priority. Should you have any concerns with our products, we will provide effective assistance..

QUICK DOCKING Easily tie up your boat in few seconds with our heavy-duty 316 stainless steel snap hooks, even if you have no experience. Two foam floats protect your boat from scratches and prevent sinking.. SUPERIOR PERFORMANCE Durable built-in bungee cord offers higher stretch and shock absorbency than any other docking rope to secure your boat, docks, cleats, and other hardware.. POWERFUL LOADING Loading capacity is up to 4,000lbs, with tensile strength of 2,200lbs. Perfect essential boat accessories for Jet Ski, SeaDoo, Yamaha WaveRunner, kayaks, pontoons and bass boats.. SALTWATER AND FRESHWATER USE Features rust-free 316 stainless steel clips and marine grade PE mooring rope for added strength and resistance to saltwater and sunlight.. SET OF TWO BUNGEE ROPES Includes a 4 bungee docking line able to stretch to 5.5 a 6' rope able to stretch to 9 with a 10 spliced eye for versatile use..

PROTECT YOUR PWC Prevents costly scratches and impact damage when docking, keeping your jet ski looking pristine ride after ride. Compatible with Seadoo accessories, Kawasaki, Yamaha and Waverunner.. FAST, SECURE HASSLE-FREE Hinged design hugs your PWC tightly, while the clip-on system and elastic cords ensure a snug, no-slip fit in rough waters.. EASY STORAGE QUICK DRYING Includes a breathable mesh bag so your fenders dry fast and store compactly inside your PWC, ready for your next adventure.. DURABLE BUILT TO LAST UV resistant, high-density closed-cell foam wont absorb water, degrade in the sun, or lose shape lasting season after season.. AMERICAN BRAND We are a family owned American business committed to making premium quality boat and RV accessories, care and cleaning supplies. We stand behind your satisfaction and our products including our Dock Fenders and Jetski Bumpers..

Shock Absorbing The bungee boat dock line absorbs the shock to your dock or anchors. These bungee dock lines for boats will give you peace of mind that your watercraft will stay put while anchored or docked. Your Sand Shark Anchor will be most effective by reducing the SHOCK on your dock lines or anchor from the waves. These marine anchor lines for boats tie turn that Hard-Snap into a Gentle-Pull.. Boat Dock Lines Rope The bungee line is hidden inside the ropes to act as a built-in dockline snubber. Anchor bungee rope for boat, MUST HAVE boating accessories and boat stuff Secure your anchor pole with these boat bungee cords bungee anchor rope for boat by Sand Shark Anchor.. Anchor Line Great buddy to your Sand Shark Anchor for boats. Stop waves from pulling your anchor out with the 7'-14' shock bungee This jet ski anchor line lets you relax at the beach when the big waves are coming in Also works as a kayak anchor rope.. Get Yours Today One of the best boat accessories, seadoo accessories, kayak accessories, bungee boat lines, pontoon boat accessories, mooring rope, or jet ski accessories Must have boat line and boat ropes.

SKU 295100928-1. Sold Each. Please verify your own fitment.

High-density EVA PWC fender provides sufficient protection when boater docks PWC that can maximum and avoid damage. Sebnux PWC fenders contours design can perfectly hug PWC providing protection where you need it most. Bulit-in no-knot lock design provides quick attachment, eliminating the need for knots and keep PWC surface cleaning. Built-in buckle grips rub rail of your PWC and keeps it snuggly in place to keep secure. Marine grade EVA material performed excellent UV-resistant and collision prevention that can last long.

Innovative DesignVITODALA boat fenders adopt an innovative shield shape combined with an anchor-patterned surface,which can absorb and disperse collision forces,delivering reliable cushioning for hulls during docking.The thick edge design disperses impact force over a wider area, expanding the collision protection coverage and providing enhanced defense for your boats against collisions.. Premium EVA Material The boat fenders are constructed from sturdy EVA material, featuring waterproof, shock-resistant, and long-lasting performance. They can withstand collisions, harsh weather conditions, and prolonged sun exposure. Their lightweight design wont compromise your boats maneuverability,simply rinse with water for easy cleaning to extend their service life.. Easy to Use Ready for instant use without inflation.Unlike traditional inflatable boat fenders,VITODALA boat docking bumpers feature an integrated locking system that eliminates the need for knot-tying or complicated lashing. Equipped with a 2m reinforced nylon rope, you can adjust the buckles and rope as needed to hang the boat fender either horizontally or vertically,ensuring a perfect fit for most types of docks and vessels.. Size Quantity GuideThese boat buoys bumpers measure 17.2 inches8.27 inches and are suitable for vessels of all sizes.We recommend adding one extra fender per side for every additional 10 ft of boat length. Normally, boats under 10 ft need 2 fenders per side, boats between 1025 ft need 3 fenders per side.This setup helps to provide comprehensive hull protection.. Wide Range of Applications Our pontoon boat fenders are specially designed for multiple vessel types, and suitable for yachts, sailing dinghies, bass boats, pontoon boats, pontoon bridge boats, ski boats and fishing boats.These fenders can be either tied to dock pilings or directly mounted on boat sides..

PREMIUM PROTECTION - Crafted from robust EVA foam, our Boat Fenders offer complete cushioning, effectively absorbing and dispersing collision forces They excel in UV and seawater resistance, ensuring superior protection for boats The durable polyester straps facilitate easy and secure fastening to the dock or deck These reliable defences provide boat owners with peace of mind. SIMPLE INSTALLATION - Utilizing locks, the strap easily attaches to the boat dock or deck Designed with a modular structure, the installation and removal processes are convenient Boat owners can effortlessly adjust it as needed using cables and locking structures. BOAT FENDER SIZE - The VIVOHOME Boat Fenders measure 16.5 x 7.4 inches, catering to a diverse range of boat sizes Generally, for boats with a length under 10 feet, it is recommended to use 2 fenders, while those between 10 to 20 feet usually need 3 fenders Following this analogy, it is recommended to add one extra fender for every 10 feet increase in boat length to ensure complete protection. VISUAL APPEAL - Beyond providing protection, our Boat Fenders elevate the aesthetic of your watercraft Offered in black, gray, and blue, these fenders not only ensure functionality but also enhance the visual appeal of your boat, marrying style with practicality. VERSATILE USE - The innovative design seamlessly caters to a variety of boat sizes and styles, including yachts, sailing dinghies, bass boats, pontoon boats, bridge slide boats, ski boats, and fishing boats Beyond delivering top-notch protection, these fenders also elevate the overall aesthetic of your ship, combining functionality with style.

FINALLY A PWC FENDER THAT ACTUALLY WORKS Are you frustrated with getting scratches on your Jet Ski every time you dock it Have you tried other PWC bumpers that simply don't work After struggling with this same problem for years, we designed our TriFenders as the Ultimate Solution to Safe and Convenient JetSki Docking. For Maximum Protection, we recommend using 2 fenders per PWC.. OFFERS MAXIMUM PROTECTION FROM DOCK RASH With a Unique Patented Design, our marine fenders offer 18 in 45 cm of horizontal as well as vertical padding which is 3 to 5 times more than other PWC fender bumpers on the market. The Extended Contact Area prevents the fenders from dislocating during wakes or tide movements and ensures maximum protection from dock rash and scratches.. QUICK SECURE ATTACHMENT, SOFT LOOPS INCLUDED Two bottom-mounted U-hooks connect quickly and securely to the rub rail on any PWC. The top hook connects to a preinstalled soft loop included or other attachment points. The Adjustable-Length Bungee Cord provides tension to Keep the Fenders In Place and flexibility to Use Any Attachment Point on your Jet Ski. A safety latch Prevents Accidental Decoupling Loss.. UNIQUE FOLDABLE DESIGN THAT'S EASY TO STORE We designed the WavesRx Jet Ski TriFenders to Maximize Protection while Minimizing Storage Requirements. Simply fold the top padded section between the two bottom sections which reduces the overall size to only 18 x 7 x 3 and easily fits into your PWC's front storage compartment. It even comes with a free Ventilated Storage Bag.. CONFIDENCE PEACE OF MIND - Powered by our relentless pursuit of Quality and Innovation, we stand behind our commitment with a generous 3-Year Hassle-Free Replacement Warranty. This dedication to excellence is further reinforced by our patented technology, recognized with patent number 11873066. Your satisfaction is not just guaranteed it's innovatively protected..

100 SOLID EVA NO DEFLATION WORRIES Say goodbye to popped or deflated traditional sausage fenders. Designed for safety-conscious captains, our boat fenders are crafted from premium, high-density solid EVA foam. They provide superior impact absorption and reliable hull protection without the need for an air pump, saving you time and money on replacements. INNOVATIVE MODULAR STACKING DESIGN Need protection for larger boats or taller dock pilings Our dock bumpers feature a unique multi-hole design that allows for versatile modular stacking. Use one pack for single verticalhorizontal hanging, or easily combine two packs side-by-side, stacked horizontally, or even in a T-shape. Customize your protective barrier to perfectly fit your specific mooring needs. BUILT FOR HARSH MARINE ENVIRONMENTS Whether facing choppy waters, storms, or glaring sun, these pontoon boat accessories are built to last. Engineered to be highly UV resistant, corrosion resistant, and impact resistant, they will not fade, degrade, or crack over time. Perfect for seasonal lake activities, harsh saltwater marinas, and unpredictable waterfront environments. NON-ROLLING DESIGN HASSLE-FREE DOCKING Unlike round inflatable bumpers that roll out of place, our 17x8 inches flat fenders feature a textured, contour-hugging design that stays exactly where you hang it. Plus, the included braided ropes and custom blue adjuster blocks allow for quick, hand-operated height adjustments without struggling with complicated rope knots. SIZING GUIDE FOR OPTIMAL SAFETY To provide the ultimate cushioning barrier during boat-to-boat rafting or docking, we recommend one fender for every 10 feet of boat length. Generally, boats under 10 ft need 2 fenders, 10-20 ft need 3 fenders, and vessels up to 30 ft need at least 3 fenders. Available in 1, 2, or 4 packs to protect your boat's resale value and give you peace of mind.

Patent Design These upgraded boat fenders for docking do not require inflation, they are thick, stain-free, completely waterproof, and more environmentally friendly and long-lasting than ordinary marine fenders. Its easy to clean and fade-resistant.. Strong Protection KEMIMOTO boat dock bumpers are made of EVA, a sturdy and robust material, that wont degrade during prolonged exposure to the sun. The dock bumpers will keep your boat from getting scratched and damaged when tied up at the dock and around other boats.. Fast Installation An integrated strap easily attaches to the boat dock, just attach and lock. Locks will facilitate the rapid installation of your boat dock fenders bumpers.. Two Installation Methods Vertical hanging on the side of the boat, thread the rope through the holes on the top edge of the fender. Horizontal hanging on the side of the boat, thread the rope through the four holes on the side of the fender.. Size Selection The KEMIMOTO boat fenders measure 17.5 inches in length and 8.6 inches in diameter. They are ideal for boats ranging from 15 to 25 feet long, including small to medium-sized yachts, fishing boats, sailboats, speedboats, motorboats, and more. We recommend using one fender for every 10 feet of boat length, with at least three fenders for boats under 30 feet..

2 PACK of BUNGEE DOCK LINES - Must have of Boat Accessories available in 3 Sizes 4' that stretches to 5 12 feet 5' that stretches to 7 feet 6' that stretches to 9 feet. EASY TO USE Bungee Dock Lines make tying up your boat or jet ski easier and faster than ever. Simply slip eyelets over both the boat cleat and dock cleat, take up any slack by wrapping in a figure 8 motion on the dock cleat and slide eyelets closed with the sliding adjustment at both ends.. BETTER ON YOUR BOAT Bungee Dock Lines act as a built in snubber, automatically relieving the pressure on your boat cleats caused by natural movement of waves at the dock.. BUMPERS THAT FLOAT A small foam bumper is included on each side of the bungee dock line to keep your line afloat in case it accidently goes overboard.. FLEXIBILITY FOR USE Each 4 foot bungee dock line stretches to 5 12 feet making it easy to make adjustments depending on cleat locations at the dock. Perfectly designed for small to medium size boats as well your as PWC, Jet Ski, Canoe or Pontoon boat..

New SeaDoo Corner Bumper. Replaces Sea-Doo Part Bumper 291002244 291000999 291001571 291001304 291001505 Bumper Plugs 291000339. Fits Sea-Doo 1997 XP 1998-2005 GTI GTI LE GTI LE RFI 1998-1999 XP Limited 1998-1999 GTX Limited 1998-2002 GTX RFI 1999 GSX Limited 1999-2001 GS 2000-2003 GTX DI 2000-2001 LRV 2000-2002 RX 2000-2003 RX DI 2000-2002 XP 2003-2004 XP DI 2003-2006 GTX 4-TEC 2006-2007 GTI RENTAL 2006-2007 GTI SE 2006-2007 GTI STD 2007 GTI 4-TEC SE NA 2007 GTX LTD BVIC 2007 GTX STD AND WAKE 2007 GTX WAKE BVIC. 2007 RXP BVIC 2007 RXP NA 2007 RXT BVIC 2008-2010 GTI 130 2008-2010 GTI RENTAL 130 2008-2010 GTI SE 130 2008-2010 GTI SE 155 2008-2009 GTX 155 2008-2009 GTX 215 2008 GTX LTD 215 2008 RXP 155 2008-2009 RXP 215 2008-2011 RXP X 255 2008-2009 RXT 215 2008-2011 RXT X 255 2008-2010 WAKE 155 2008 WAKE 215 2009 WAKE PRO 215 2011 GTS PRO 130. Includes 3 bumper plugs, Does not include rivets, Direct OE Aftermarket Replacement, Exact Item is Pictured.

Fit Sea-Doo RXT, RXT-X, GTX and WAKE PRO 2018 and up, FISH PRO.

Supersedes Part 291001035. Additional and Alternate Color s 291000946 Violet, 291001176 Amethyst. Color Black.

SKU 291002244. Sold Each. Please verify your own fitment.

Color Black. Easy and quick installlation. Sold each. Fits various GTX models from 2009-2015, RXT models from 2009-2015, and Wake PRO models from 2010-2013 and 2016.

SKU 295100418 295100550. Sold Each. Please verify your own fitment.