BRP oil change kit for the Sea-Doo Wake 155 watercraft. Includes Oil, Filter, O-Rings, and Funnel.

Edwards Bundle contains 2 quarts of XPS full systhetic 5W-40 Oil. OEM oil filter, O-ring. Edwards spout, towel, shop rag.

Widely Application These oil filter change kit fit for All Sea-Doo PWC 4-Tec Models 2002 Up, does not fit Sea-Doo Spark or 300 ACE Models. Package Included 3 oil filter, 9 O-Ring, 9 spark plug. Replaced Manufacture Part Number Oil Filter 420956740 420956741 O-Ring 420950860 O-Ring 420850500 O-Ring 420230920 Spark Plugs 4339 DCPR8E. Function These oil filters used to remove metal debris, dust, carbon deposits and other pollutants from the engine oil, and keep the engine oil clean ensure smooth flow of engine oil, stabilize oil pressure protect the engine, extend engine life. Warm Tips TheOil filter change kit and the engine oil must be replaced simultaneously, otherwise the old oil will contaminate the new filter element. It is better to apply some new engine oil before installation to the sealing ring to avoid oil leakage due to dry twisting.

2 WAY USAGEPneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.. SPEEDY EXTRACTIONFast extraction speed of 1.8L min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.. NO OIL LEFTVacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.. Easy to UseWith FOUR UNCLES oil extractor, you dont have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.. WORK FREELYNot limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..

Widely Application These oil filter change kit fit for All Sea-Doo PWC 4-Tec Models 2002 Up, does not fit Sea-Doo Spark or 300 ACE Models. Function These oil filters used to remove metal debris, dust, carbon deposits and other pollutants from the engine oil, and keep the engine oil clean ensure smooth flow of engine oil, stabilize oil pressure protect the engine, extend engine life. Replaced Manufacture Part Number Oil Filter 420-956-740 420-956-741 O-Ring 420-950-860 O-Ring 420-850-500 O-Ring 420-230-920 Spark Plugs 4339 DCPR8E. Warm Tips TheOil filter change kit and the engine oil must be replaced simultaneously, otherwise the old oil will contaminate the new filter element. It is better to apply some new engine oil before installation to the sealing ring to avoid oil leakage due to dry twisting. Package Included 2 oil filter, 6 O-Ring, 6spark plug.

Complete anchor kit includes an 8 lb mushroom anchor, 20 ft nylon rope, stainless steel hook, and high-visibility red float. Designed for secure anchoring in shallow water conditions.. Durable components provide reliable holding power and easy deployment.. Works with ALL 1503 4-Tec Sea-Doo ski's and boats. This kit is NOT intended for Sea-Doo Spark or 300HP Sea-Doo.

Function The sollon oil filter intercepts impurities before they enter the carburetor, this extends the life of the machine's engine. Replace OEM Part HF556KN556, 420956741, 420956740, 711956741, 711956740. Package include 2 Oil Filter 420956741420956740, 2 O-Ring 420850500, 2 O-Ring 420950860, 2 O-Ring 420230920. Fitment GTI 4-Tec 130 GTI LTD 4-Tec 155 GTI SE 4-Tec 130 155 GTR 4-Tec 130 215 GTX 4-Tec 155 GTX 4-Tec 215 GTX 4-Tec 185 RXP 4-Tec 155 RXP 4-Tec 215 Wake 4-Tec 155 Wake 4-Tec 215 Wake Pro 4-Tec 215 scroll down to see more detailed applicable models. Our Service If you have any questions after purchasing our products,please contact our customer service. We will give you a timely reply and provide refund and return services for free.

Changing your oil and saving money is easy with our 4 stroke oil change kit. This kit has everything you need to get the job done right. It comes with the following. SBT brand oil filter Replaces 16097-0004. 4 quarts of original equipment Perfomance Oil. Extraction pump holds 1.5 gallons of oil with 6 feel of tubing..

Precise Fitment Motorboat maintenance kit includes fuel filter and spark plugs, compatible with Sea-Doo PWC 4-Tec Models 2002 and Up, not compatible with Sea-Doo Spark or 300 ACE Models. Replace Part Number Oil filter 420-956-740 420-956-741, o-ring 420-950-860 420-850-500 420-230-920, spark plugs 4339 DCPR8E. One-Stop Maintenance Fuel filter and spark plug combination, synergistically tested for clear compatibility and better matching. Improved Performance The filter in the kit can effectively filter impurities in the fuel, and the spark plug increases combustion efficiency, improving engine life and performance. Corrosion-Resistant Material Maintenance kit is made of oil-resistant and corrosion-resistant composite material, adapting to freshwater and seawater environments, durable and long-lasting.

Work Portability Portable 6-liter hand pump, using precision machining process, matching the hose with the tubes, light weight, easy to assemble and use. Simple to operate, suitable for carrying around to complete a variety of liquid extraction work. Quick Extraction Vacuum and strong suction are generated by pumping the handle, which allows rapid evacuation of liquids from the unit. Upgraded aluminum pressure release plug is more durable and efficient. Additional epuiped a replacement rubber plug. Multipe Tubes The 59 transparent main hose makes oil quality checking easier and three 41 extension tubes to meet different types of vehicles. Additional equipped with a 19 brake bleeding hose to change brake fluid. Hominization Design Markings on the side of the tank make it easy to record the amount of oil removed. It has a spout for easy pouring of old oil. The extra wide base makes the tank more stable. Application Applicable for vehicles, motorcycles, lawnmowers, boats, jet skis etc. And extract different types of liquids, like engine oil, transmission fluid, coolant and power steering fluid. Note Gasoline and fluids with high volatility high corrosion high alkalinity and high temperature are FORBIDDEN to be used on the extractor.

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic oil, oil filter, o-rings and washer. Synthetic 5W-40 450 CC or less except Rally and DS ATVs. Superseded From 9779256. Oil grade Grade 5W-40.

OEM BRP Product, Part Number 9779489. Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Oil, oil filter, o-rings and washer. Synthetic 5W-40 900 ACE.

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Oil, oil filter, o-rings and washer. ENGINE TYPE Engine 4-Stroke. Superseded From 9779251.

Replace Part Number The oil filter replace for 420956123, with O-rings replacing for 293300086, 420650500. The included spark plugs replace for 415129403 CR8EB 7784. Compatible with Oil Filter with O-Ring Spark Plugs Kit Compatible with Sea-Doo Spark All Models 2014-2021, Compatible with Sea-Doo GTS 900 2017-2018, Compatible with Sea-Doo GTI 900 2017-2020. Package included The Oil Filter with O-Ring Spark Plugs Kit includes 1 fuel filter with gaskets and 3 spark plugs. Function Regularly replacing the oil filter and spark plugs helps restore proper fuel filtration and ignition, ensuring the engine runs smoothly on water. Durable and Reliable Replace the oil filter and spark plugs and carry out reliable maintenance of Marine engines, Keeping your personal watercraft running at its best with this dual oil filter and spark plug change kit.

Everything you need for an oil change on all 150hp Mercury and Mariner outboards in one box. Kit includes 5 1L bottles of Quicksilver 10W-30 4-stroke marine engine oil, Quicksilver premium oil filter, drain plug seal and drip tray. Quicksilver 4-stroke marine engine oil is formulated with advanced corrosion inhibitors and provides outstanding lubricity to reduce wear, scuffing and scoring for improved long-term engine reliability. NMMA FC-W and FC-W Catalyst Compatible.

TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 14 OD and 38 OD extension tubes, up to 40 cm when connected, long enough to reach hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid.. LEAK FREE FLUID EXTRACTOR - The Locking button helps to use the tube safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an airtight seal, the precision threading at the end of tube preventing any leakage.. MOST LIQUID REMOVAL - The extracting filling vacuum fluid pump is designed to be chemical and oil resistant. Remove mechanical liquids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles.. PACKAGE CONTENTS - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience.. 100 SALE SUPPORT - We back up all products for life, 247 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone.

Ultra-convenient all-in-one oil change kit saves time and money.. Includes XPS Synthetic or Synthetic Blend Oil, oil filter, o-rings and washer.. Please verify your own fitment.

The electric oil extractor with non-slip pads comes fully assembled and ready to use straight out of the box. It includes a detailed manual and a list of 100 car models with engine oil capacity, which makes it easy for anyone to get started with confidence, even if they have no prior experience changing oil.. Powerful Motor - The oil extractor pump has a powerful 100W motor, which allows it to pump oil up to 1 gallon per minute. We use a rotary engine that is built with high-quality, reliable metal materials and has no plastic parts, making it more efficient and durable compared to others.. Convenient Usage - The oil change electric pump has extended hoses, each 4 feet in length, allowing you to extract oil from larger engines, such as pickups, trucks, and boats. Quick-release plugs in the kit prevent oil spillage during storage, and a special clip holds the hose in place when draining oil into a container.. Extended Functionality - The car oil suction pump's power cable has straight construction with 59 inch. 1,5 m length, that twice the length of the coiled cables, allowing you comfortably change oil even in pickup trucks. We've also increased the cable's cross-sectional area and clamp size for added safety.. Storage Case - Our electronic fluid extractor comes in a compact storage case, which allows for storing the kit in one place and easy carrying. The step-by-step instruction manual is well-composed and reliable, as it is written by a certified Master ASE mechanic, and is attached inside the case, ensuring that you never lose it.. Versatile Pump - The oil change system is also equipped to handle oil changes for the transfer case and rear axle gearbox, making it essential for vehicles lacking drain plugs. This pump can be widely used in changing oil for lawn mowers, power washers, scooters, ATVs, generators, etc..

Brand new, genuine Ski-Doo XPS 4T OW-40 Synthetic Oil Change Kit for Rotax 900 ACE engine. This is a factory original equipment item, not an aftermarket. Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic or Synthetic Blend Oil, oil filter, o-rings and washer. Replaces prior part number 415130167.

Ultra-convenient all-in-one oil change kit saves time and money. XPS oils last longer and protect your engine better than other oils. 4T 0W-40 Synthetic Oil. Superseded From 779253.

Efficient Equipment This 12V, 8 L x 7 W x 4 H oil pump has a powerful force of 60W. Drawing 5A of current, its motor delivers 0.8-1.0 litersmin flow rate while operating steadily and silently. Its very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.. Easy Installation First connect the hose's inlet and outlet to the oil inlet and outlet, and then connect the power clip with a red positive link and a black negative link to the car battery. Clamp the conductive clip, and press the button again. The operation of the oil transfer pump is very simple, and you can run your engine smoothly by yourself.. Usage Guide Before using the oil pump extractor, you need to start the motor to warm the oil to 104F-140F. Then shut down the motor before pumping. It cannot be used for gasolinepetrol, water, gearbox oil, or flammable liquids fuel, gasoline, etc.. Before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and positive and negative poles, and lock the hoses. Press the button only after all connections are installed.. Full Accessories The set of Motor Oil Diesel Fluid Transfer Pump contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories a 1.5 meter outlet hose, a 1.2 meter inlet hose, 2 hose locks, and 2 battery clamps.. Wide ApplicationThis 12V transfer change oil pump doesnt have complex workflows, and can easily remove oil scavenged in the tube from cars, motorcycles, RVs, boats,trucks, quad bikes, and lawn equipment at any time. It is also an excellent choice for changing the oil in scooters, ships, marine trucks, tractors, truck forklifts ,and more..

Efficient Equipment This 12V, 8 L x 7 W x 4 H oil pump has a powerful force of 60W. Drawing 5A of current, its motor delivers 0.8-1.0 litersmin flow rate while operating steadily and silently. Its very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.. Easy Installation First connect the hose's inlet and outlet to the oil inlet and outlet, and then connect the power clip with a red positive link and a black negative link to the car battery. Clamp the conductive clip, and press the button again. The control of the oil transfer pump is very simple, and you can run your engine smoothly by yourself.. Usage Guide Before using the oil pump extractor, you need to start the motor to warm the oil to 104F-140F. Then shut down the motor before pumping. It cannot be used for gasolinepetrol, water, gearbox oil, or flammable liquids fuel, gasoline, etc.. Before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and positive and negative poles, and lock the hoses. Press the button only after all connections are installed. Do not pump out oil w. Full Accessories The set of Motor Oil Diesel Fluid Transfer Pump contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories a 1.5 meter outlet hose, a 1.2 meter inlet hose, 2 hose locks, and 2 battery clamps.. Wide Application This 12V transfer change oil pump doesnt have complex workflows, and can easily remove oil scavenged in the tube from cars, motorcycles, RVs, boats,trucks, quad bikes, and lawn equipment at any time. It is also an excellent choice for changing the oil in scooters, ships, marine trucks, tractors, truck forklifts ,and more..

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer. This is a factory original equipment kit, not an aftermarket.

3 Quarts of Can AM XPS 5W-40 Oil. Aftermarket Oil Filter equivalent to 420256188. O-Ring and Washers. Convenient Funnel.

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Full Synthetic Oil, oil filter, o-rings and washer. Engine Type Engine 4-Stroke. Superseded From 9779249.

Can-Am OEM Product, Part Number 9779488. Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Oil, oil filter, o-rings and washer. Synthetic 5W-40 450 CC or less except Rally and DS ATVs.

Ultra-convenient all-in-one oil change kit saves time and money.. Includes XPS Synthetic or Synthetic Blend Oil, oil filter, o-rings, and washer. Synthetic Blend 5W-40 450 CC or less - except Rally and DS ATVs. This is a factory original equipment kit, not an aftermarket.

Edwards Oil Change Kit includes 1 Gallon XPS 5W-40 Oil. BRP Oil Filter, ORings. 3 NGK KR9E-G Spark Plugs. Edwards Spout, Towel and Gloves.

Kit includes 1 Gallon of OEM BRP 5W-40 Full Synthetic Oil. Kit includes BRP Oil Filter, NGK Spark Plugs, Oil Filter Cap O-Ring Set.. Repacing the O-Rings around the oil filter cap ensures no leaks and a tight seal for optimum performance. Fits ALL 4-TEC Models - 2002 GTI GTX RXP RXP-X RXT-X 130155185215255260HP.

EASY FLUID DRAIN This oil pump for oil change is more than just an oil extractor pump Remove oils and fluids on cars, light trucks, small engines, and boats Use as a manual oil extractor, gear oil pump, transmission fluid removal pump, boat oil change extractor pump, and more. VEHICLE OIL REMOVAL PUMP Hand vacuum pump evacuates fluids directly from dipstick tubes At 9.5 liters of capacity, this manual oil extractor pump for boats can be used as an oil change pump extractor and fluid transfer pump on most vehicles. EASY TO USE The vacuum pump oil extractor comes with an oversize handle for easy pumping A flexible 5ft long 14 inch diameter main suction hose allows you to reach most dipsticks An overflow shutoff valve prevents overfills in the 2.5 gallon reservoir. FOR THE DIY MECHANICS This convenient engine oil extractor is perfect for DIY mechanics Oil vacuum pump extractor comes with a 41 dipstick tube and 17 suction tube Remove the main suction tube from the oil suction pump for easy recycling. EASY TO ASSEMBLE Get the best oil extractor on the market The single piece construction of the oil extractor pump automotive reservoir is ready out of the box Select the correct fluid extractor automotive adapter for your needs and start draining.

Carefree Car and Boat Care Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump. Double Duty For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole Manually suction fluid with the engine oil pump's oversized handle. Dont Cry Over Spilled Oil The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom The built-in shutoff prevents overfilling the reservoir. Time Flies Draining oil from beneath a vehicle takes eons The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid directly from the dipstick tube. Under Pressure Change transmission fluid anytime with the pneumatic and manual pumping options This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.

Everything you need for an oil change on all 40-60hp Mercury outboards in one box. Kit includes 3 1L bottles of Quicksilver 25W-40 4-stroke marine engine oil, Quicksilver premium oil filter, drain plug seal and drip tray. Quicksilver 4-stroke marine engine oil is formulated with advanced corrosion inhibitors and provides outstanding lubricity to reduce wear, scuffing and scoring for improved long-term engine reliability. Part number 8M0081912. NMMA FC-W and FC-W Catalyst Compatible.

Ultra-convenient all-in-one oil change kit saves time and money. 4T 5W-40 Synthetic Blend Oil Change Kit. Please verify your own fitment. Superseded From 779250.

Specifically engineered to meet the unique needs of Rotax DI and RFI engines, it provides maximum protection against engine wear.. Uses a highly-evolved additive package to keep engine parts lubricated, clean and free of wear.. This low smoke, low odor formula also allows for maximum engine performance.. Can be used in direct, semi-direct fuel injection system and high performance carbureted 2-stroke engines..

HIGH EFFICIENT This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate 3Lmin flow rate for engine oil, 4Lmin for diesel. Voltage 12V, maximum current 5A, maximum power 60W.. APPLICATION This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles.. EASY INSTALLATION You just need to place the inletoutlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself.. NOTE To pump oil properly, please start the vehicle to heat up the oil to 4060 degreesabout 15 minutes. Otherwise, the oil change pump may have low suction or jammed.. WARNING This oil pump is not use to extract water, gearbox-oiltoo viscous or flammable liquids fuel, petrol etc..

Complete oil change kit designed for 4-stroke personal watercraft, providing everything needed for routine maintenance.. Includes an easy-to-use oil extractor pump, replacement oil filter, sealing O-ring, engine oil, and spark plugs for a thorough service.. Ideal for do-it-yourself oil changes, helping maintain engine performance while saving time and service costs.. 3 NGK CR8EB Spark Plugs. For Use With ALL Sea-Doo Spark Models and Models Using 900 ACE 900 HO ACE engines.

Complete oil change kit designed for 4-stroke personal watercraft, providing everything needed for routine maintenance..

Original Yamaha OEM Yamalube Complete Fitment in Description. Kit includes 4 YamaLube Quarts Yamaha Part LUB-10W40-WV-12-00. Kit Includes 1 Yamaha Oil Filter Part 69J-13440-04-00. Made by Yamaha Specifically for Yamaha.

BRP oil change kit for the Sea-Doo GTI SE 130 and SE 155 watercraft. Includes Oil, Filter, O-Rings, and Funnel.

Sea-Doo 4-Tec 300 HP Oil Change Kit with Oil Filter, O-Rings Spark Plugs. This Kit is for Sea-Doo 4-Tec 300 HP Models Only. Fits Sea-Doo GTX Limited 300 2016-2019 RXP-X 300 2016-2019 RXT-X 300 2016-2019. Includes 1 Gallon BRP 4-Stroke Synthetic Blend Summer Grade Oil 1 Aftermarket Oil Filter with O-Rings 3 NGK Spark Plugs. Replaces OEM number Oil 293600122 - 779134 Oil Filter 420956744 O-Ring 420950860 O-Ring 420850500 O-Ring 420230920 Spark Plugs 90893 - 296000407.

Sea-Doo 4-Tec 300 HP Oil Change Kit with Oil Filter O-Rings. This Kit is for Sea-Doo 4-Tec 300 HP Models Only. Fits Sea-Doo GTX Limited 300 2016-2019 RXP-X 300 2016-2019 RXT-X 300 2016-2019 RXP 2018-2019 RXT 2018-2019 GTR 230 2018 GTR-X 230 2019 Wake Pro 2018-2019 Wake Standard 2018-2019 GTI 130 2018-2019 GTI 155 2018-2019. Includes 1 Gallon BRP 4-Stroke Synthetic Blend Summer Grade Oil 1 Aftermarket Oil Filter with O-Rings. Replaces OEM number Oil 293600122 - 779134 Oil Filter 420956744 O-Ring 420950860 O-Ring 420850500 O-Ring 420230920.

XPS synthetic 4-stroke oil is specifically engineered to meet the particular lubrication requirements of Can-Am, Spyder and Sea-Doo vehicles equipped with Rotax 4-TEC 4-stroke engines.. Powersport formula with premium anti-wear and anti-corrosion additives. Wet Clutch, Turbo and Supercharge compatible. Replaces OEM Oil Filter 420-956-740, 420-956-741 O-Ring 420-950-860, 420-850-500, 420-230-920. Fits All Sea-Doo GTX GTI RXP RXT PWC 4-Tec Models 2002 Up.

Genuine XPS SeaDoo Oil. Quality aftermarket Oil Filter O-Ring Kit included. NGK Genuine Spark Plug Set of 3 Included. Fits all 2002 SeaDoo 4-TEC Models 130155185215255260 HP models.

This synthetic blend is the oil of choice for owners of high-performance vehicles with a 4-stroke engine, including turbo or supercharged engines requiring carefully engineered friction.. Combining the finest quality synthetic base stocks with extreme-tested synthetic additives, it provides superior engine and transmission protection against rust ans corrosion compared to conventional. Fits 2002-2012 Sea-Doo 4-Tec Models Thru 260HP.

Sea-Doo Spark Oil Change Spark Plug Kit - 2 Pack. Fits Sea-Doo Spark All Models 2014-2020. Genuine NGK Spark Plugs BRP 4-Stroke Summer Grade Oil OE Quality Aftermarket Oil Filter O-Ring. Includes 4 Quarts BRP 4-Stroke Summer Grade Oil 2 Oil Filters with O-Rings 6 NGK Spark Plugs. Replaces OEM number Oil 293600121 - 779133 Oil Filter 420956123 O-Ring 293300086 420650500 Spark Plugs 415129403 CR8EB 7784.

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer. This is a factory original equipment item, not an aftermarket.

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer. This is a factory original equipment item, not aftermarket. REPLACES PART 295501138.

Ultra-convenient all-in-one oil change kit saves time and money. Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer. 4T 5W-40 Synthetic Blend Oil Change Kit. Superseded From 295501157.