Universal Hard Drive Adapter SATA IDE to USB adapter allows connect your SATA IDE device to computer as an external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives. This is a tool to duplicate, copy, backup, or transfer large amounts of data from one drive to another. Transfer Rate up to 5Gbps SATA to USB 3.0 adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, backward compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards, The actual transmission speed subjects to the setting of the device connected. Wide Compatibility Hard drive to USB adapter support Operate Systems Support Windows XPVista7 88.110, Mac OS 10 or higher, Linux. Compact body design, Support Plug, and play hot swap, OnOff power Switch for Hard drives protection. Support Hard Drives Capacity up to 6TB Hard drive adapter has a SATA III connector and two IDE connectors 40pin and 44pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the disk, set the master disk and the slave disk. Included 12V 2A Power Supply USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for power up the 5V12V IDE devices usage, ensures SATA HDD can be connected well. 4pin power cable is designed for a 3.5 IDE drive LED light shows power and activity status. power indicator3.5-inch hard diverequires an external power supply to function The hard drive must be connected for the power on indicator light to turn on.

6Gbps With data transfer rates of up to 6 Gbps for SATA 3.1, you can expect fast and efficient file transfers. The USB C adapter is backward compatible with USB 3.02.01.1 for added convenience, 5Gbps transfering rate for IDE hard drive disk.. Wide Compatibility Our SATA adapter supports a wide range of storage devices, including 2.53.5 SATA HDDs and SSDs, 2.53.5 IDE HDDs, as well as DVD-ROM, CD-ROM, CD-RW, DVD-RW, and DVD-RW optical drives. It features a dual-head IDE connector 40-pin and 44-pin, along with a SATA II connector, allowing you to connect and operate TWO drives SATA and one IDE simultaneously. NOTE Can not read the two IDE at same time.. Stable Power Provided To ensure stable power supply, we provide a 12V 2A power cable. Additionally, the 4PIN Power Cable is specifically designed for 3.5 IDE drives.NOTE The included 4Pin power cable is only required for 3.5'' IDE HDDs, no need to plug it in a 3.5'' SATA HDD even it comes with 4 big power pins.. Human-Friendly Design Our SATAIDE adapter is plug and play, allowing for easy installation and use. It also supports hot swapping, enabling you to connect or disconnect drives without the need for restarting your computer. The adapter includes an onoff switch for HDD protection, and the LED light indicates power and activity status.. Package 1 X SATAIDE Adapter, 1X USB C Cable, 1 X 12V2A Power Adapter, 1 X 4Pin Power Cable. We take pride in offering top-notch customer support. If you have any questions or concerns, our dedicated customer email support team is available 247 to assist you..

3-in-1 Versatile Adapter This unique IDE to USB adapter also functions as a SATA to USB and IDE to Sata converter. Easily connect and access data from almost any old 2.53.5 IDE PATA hard drives or modern SATA HDDSSD to your computer via USB. It's the all-in-one solution for your data recovery and drive cloning needs.. SuperSpeed USB 3.0 Performance Equipped with a USB 3.0 interface, this adapter offers data transfer speeds up to 5Gbps, which is 10x faster than USB 2.0. Backward compatible with USB 2.01.1 ports. Quickly retrieve your important files, photos, videos, and documents without long waiting times. Complete Kit with Dedicated Power Includes a 12V2A power adapter for 3.5 IDE drives and a 5V USB power cable for 2.5 drives. Provides stable and sufficient power to ensure your desktop hard drives operate safely and reliably, preventing data loss due to underpowering.. Plug and Play, User-Friendly No need for complicated installation or drivers for Windows 111087VistaXP, Mac OS, Linux may vary by system. Simply connect the cables, and your computer will recognize the hard drive as an external storage device. Start accessing your data in seconds.. Wide Compatibility Data Recovery Essential Perfect for accessing, backing up, or cloning data from old desktop or laptop hard drives. An indispensable tool for IT professionals, technicians, and home users for data recovery, drive upgrades, and digital archiving projects..

CONVENIENT SETUP This IDE to SATA adapter enables SATA connectivity on older IDE motherboards, and is a complete hardware solution that does not require additional drivers or software Works with any Operating System. ADD SATA CONNECTIVITY This IDE SATA converter is a cost-effective solution for connecting SATA hard drives or optical drives to legacy IDE systems, with no additional controller cards required Includes LP4 to SP4 internal power cable. WIDE COMPATIBILITY Supports 2.53.55.25in SATA drives Features features ODD Optical Disk Drive support for Blu-ray, DVD, or CD-ROM drives Compliant with SATA version 1.0 and supports SATA IIIIII Compatible with IDEATA 3366100133. THE IT PRO'S CHOICE Designed and built for IT Professionals, this IDE to SATA motherboard adapter is backed for 2 years, including free lifetime 245 multi-lingual assistance.

Universal Compatibility for SATA IDE Hard DrivesOur hard drive adapter compatible with 2.5 inch 3.5 inch IDE SATA HDDSSD It supports up to 8TB large capacity hard drives, perfectly solving the needs of old hard disk data reading, backup and migration. Warm note Two IDE hard drives cannot be used simultaneously.. Dual USB 3.0 Interface and 5Gbps Fast Speed Equipped with USB 3.0 dual interfaces, this hard disk converter fits almost laptops, desktops with USB or Type-C ports. It delivers a high-speed transmission rate up to 5Gbps, 10x faster than USB 2.0 480Mbps, greatly reducing the waiting time for large file transfer, and is backward compatible with USB 2.01.1 for wider compatibility.. Stable Power Supply Comes with a 12V power adapter, which provides stable and sufficient power for 3.5 inch large-capacity hard drives, ensuring stable operation of the hard disk during high-speed transmission.Warm note 3.5 inch hard drives must be connected to the external power supply to work properly.. Driver-Free Plug and Play, Friendly for Beginners No complicated driver installation is required, this external hard drive reader supports plug and play, you can get it work within seconds. The built-in indicator lights clearly show the power and working status of the adapter at a glance. Wide System Compatibility This SATA IDE to USB adapter is widely compatible with Windows 111087VistaXP, Mac OS, Linux. It is an ideal tool for home and office data backup, hard disk data recovery, system migration, cross-device file sharing, and the best choice to retrieve precious photos, videos and work files from your old IDE hard drives..

Convert a full size mSATA SSD into a standard 9.5mm high 44-pin 2.5 IDE SSD drive.. Open frame aluminum housing dessign provides excellent heat dissipation for mSATA SSD. Compatible with most mSATA solid state drives such as the SAMSUNG 840850 EVO. OS independent No driver installation required. Native support in Windows, Mac and Linux.. Fully RoHS compliant. High quality product. Made in Taiwan..

Universal SATAIDE Hard Drive AdapterThe usb to sata adapter can support 2.53.5 SATAIDE HDDSSD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVDRW optical drive. Hard drive adapter is also widely compatible with Windows, Mac OS, and Linux.. 5Gbps Fast SpeedThanks to the USB 3.0 port, the maximum transfer speed can reach 5Gbps. It's easy to transfer large files within seconds. USB hard drive adapter can be also backward compatible with USB 2.0.. Easy to OperateThree hard drives can be connected simultaneously one 2.5 IDE, one 3.5 IDE, and one 2.53.5 SATA. Just plug and play without driver.. Smart IndicatorsFor our usb to sata adapter, there are 3 indicators in total. The white one is power light the first blue one is SATA light the second blue one is IDE light. The respective HDD light will flash during data read or write, so it is much easier for you to know the working status of the device.. Customer FocusOur goal is to give you a 100 satisfaction shopping experience and we provide one-year warranty..

Supports 2.53.5 dual SATA and IDE hard drives. All in 1 dual bay docking station allows an easy accessing with two 2.5 inch 3.5 inch SATA I II HDD SSD, dual 6TB hard drive with USB 3.0 hub, backward with USB 2.01.1Please note this sata reader cannot read 3 drives or 2 SATA drives at the same time, but can read one IDE and one SATA drive at the same time. Supports SATA 2 and SATA 1, and not for 3.5-inch WD IDE hard drives. ? High speed USB 3.0 interface with data transfer rate up to 5Gbps, 10 times faster than USB 2.0. The hard drive dock supports hard disk clone, high speed one to one source HDD to target HDD without computer connections. High speed Hard Drive Enclosures. ide enclosure drive docking station.. Tool free installation, no driver needed, plug and play, support hot plug. It features 6 slots for multiple memory cardsfor SDMMCMS cards, TF card, CF card, M2 card etc., up to 32G cards supported, easy and quick access to multimedia files. LED indicator shows the read and write status of hard drive reader and power supply, clear and convenient. Multi-card slot HDD Case hard drive dock external hard drive enclosure.. External HDD Hard Drive can transfer files from HD to PC or card readers easily and quickly, all-in-one HDD docking with one touch backupOTB and one touch cloningOTC. Hot swappable and pluggable for most operation systems Win987810Me2000XPVista, for Mac9.X and higher. hard drive reader to usb multi hard drive enclosure.. We promise to provide 1 year limited after-sales service and long-lasting technical support. In the use of hard drive cloner during any product issues, please e-mail to us, we will do our best to solve for you, thank you for your understanding and support. hdd enclosure hard drive enclosure 3.5 hdd docking station hdd dock hard drive data recovery kit. ide enclosure ide hard drive docking station hard drive docking station ide enclosure for ide drive external sata ide hard drive docking station hard drive docking station usb 3.2 hard drive docking station with ide vsvabefv hard drive docking station ide hard drive enclosure 3.5 external hard drive enclosure 3.5 hot swappable ide external enclosure pc hard drive docking station enclosure ide ide drive enclosure 3.5.

VERSATILE 3-IN-1 DATA ACCESS This universal hard drive reader supports 2.53.5 SATA HDDsSSDs, 2.53.5 IDE HDDs, and CDDVD optical drives. Featuring dual-head IDE 40pin44pin and SATA III connectors, this SATA IDE adapter is a good drive station tool to duplicate, copy, backup, or transfer data between drives. 5GBPS HIGH-SPEED Equipped with USB-A USB-C dual interfaces, this versatile USB hard drive converter fits almost all laptops and desktops. Operating as a SuperSpeed USB converter, it delivers up to 5Gbps transmission speeds10x faster than USB 2.0drastically reducing file waiting times. STABLE 12V 2A POWER ADAPTER Supporting drives up to 6TB, this converter comes with a 12V 2A power adapter for a stable electricity supply. Note 3.5 desktop hard drives require this external power supply to spin up, while 2.5 laptop drives run solely on USB bus power. HOT-SWAP PLUG PLAY This driverless adapter features hot-swap support, a secure plug-and-play layout, and an independent OnOff switch for ultimate HDD protection. Includes an LED activity indicator and a 4-pin Molex power cable specifically engineered to power 3.5 IDE legacy drives. OS SUPPORT PACKAGE INCLUDED Recognized as a storage adapter by Windows 111087, macOS, Linux, and Chrome OS with a simple installation guide flow, What's in the box 1x IDESATA converter, 1x 2-in-1 USB-CA cable, 1x 4PIN cable, 1x 12v power supply.

Universal compatibility 1 IDE port 1 SATA port, With adjustable IDE connectors, Supports all 2.5 3.5 IDE SATA I II III hard disk and SSD, Maximum support 20TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. Note Please do not replace the hard drive when the product is working.. Data transfer Easy transfer of data from your 2.5 3.5 IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader TF card SD card, at the same time card reader can read only one memory card, up to 64GB.. One-Touch Backup One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note OTB software cannot be installed on macOS and IOS systems.. Operating System Compatible with Vista ,Windows 7 8 8.1 10 11, Mac OS 10.10 or later. Please format the disk according to your operating system Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS.. WARRANTY We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..

Type 2pcs Micro SD TF Card Shield Expansion Board, Support Micro SD Card, Micro SDHC card high-speed card.. The module MicroSD Card Adapter is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.. SPI Interface A total of 6pins GND, VCC, MISO, MOSI, SCK, CS, GND toground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin.. On-board level conversion circuit, that means the interface level is 5V or 3.3V.. Power supply is 4.5V-5.5V, Onboard 3.3V voltage stabilizing circuit..

Supports 40Pin IDE PATA to SATA conversion, compatible with 2.5-inch3.5-inch legacy hard disk drives HDDs and internal optical drives CDDVD drives. It can easily connect to SATA interface devices such as new computers, breaking the interface barrier between old and new devices.. No additional drivers need to be installed the system automatically recognizes the adapter after connection. No professional technical operation is required, allowing even novice users to get started quickly and simplifying the process of data migration or reuse of old devices.. Supports a maximum transfer speed of 480Mbps, enabling efficient completion of large file copying, data backup and other operations. It avoids time waste caused by slow transmission and ensures the efficiency of data transfer.. Equipped with a 12cm-long MOLEX 4Pin power cable, it meets the stable power supply needs of the device. The cable length is suitable for different installation positions inside the chassis, avoiding messy wires and adapting to common usage scenarios such as desktop computers.. Specifically designed for old IDE interface devices, it helps users activate idle legacy hard drives and optical drives. It enables data coexistence between old and new computers, as well as re-enabling old optical drives to read discs, fully tapping the residual value of old devices..

UNIVERSAL HARD DRIVE READER SATA and IDE to USB 3.0 adapter supports 2.53.5 HDDSSD, 2.53.5 IDE, 5.25 DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW optical drive. With dual-head IDE connector 40pin and 44pin plus one SATA III connector, lt's compatible with 2.53.5 DESATA hard drives. 5G BPS HIGH SPEED TRANSFER This IDE to SATA Hard Drive adapter is designed with a USB 3.0 port that supports high-speed, enabling data transfer rates of up to 5Gbps. Data transfer process is exceptionally simple and effortless. Additionally, our ultra recovery converter maintains backward compatibility with USB 2.0 USB 1.1. HUMANIZED DESIGN This ide hard drive converter adopts a 2-IN-1 USBUSB-C portdesigned, USB to USB-C adapter that plugs into the USB port to match your laptop and is not limited by the computer model. It also supports hot swapping, allowing you to connect or disconnect drives without having to restart your computer. Onoff switch for HDD protection and the LED light indicates power and activity status. STABLE POWER SUPPLY Our USB 3.0 to IDE SATA adapter comes with a 12V2A power adapter, for 3.5 IDE drivers and old SATA HDD, you need to connect this power adapter and 4-pin power cable for a better connection. If you want to use old IDE hard drive, please set a jumper and set it to slave. The actual transmission speed depends on the Settings of the connected device. WHAT YOU WILL GET Package included Hard driver readerx1, 4-pin power cablex1, 12V2A power adapterx1, USB C and USB 2-In-1 cablex1, manualx1. Tips This IDE to USB adapter default master is a 2.5 IDE hard drive, if your hard drive is new, please go to Disk Management to initialize it first so that the hard drive can be recognized.

Convert any SATA drive into 40-pin IDE interface just like a standard IDEATAPI drive. Ideal for computers or embedded systems that are not equipped with SATA controllers.. Supports any type of SATA III, SATA II and SATA I Devices such as Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk, etc.. Complete hardware solution no driver installation is required. Compatible with any OS such as Windows, DOS, Mac, Linux, etc. that support IDEATAPI storage devices. Mini vertical board with size only 3 L x 0.9 W and mount directly to the back of SATA drive.. Fully RoHS compliant. Made in Taiwan..

Universal compatibility 1 IDE port 1 SATA port, With adjustable IDE connectors, Supports all 2.5 3.5 IDE SATA I II III hard disk and SSD, Maximum support 20TB SATA interface Hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. Note Please do not replace the hard drive when the product is working.. Data transfer Easy transfer of data from your 2.5 3.5 IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB s. Integrated all-in-1 card reader XD card TF card MS Duo Pro card CF card SD card, at the same time card reader can read only one memory card, up to 64GB.. One-Touch Backup One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note OTB software cannot be installed on macOS and IOS systems.. Operating System Compatible with Vista ,Windows 7 8 8.1 10 11, Mac OS 10.10 or later. Please format the disk according to your operating system Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS.. WARRANTY We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..

Silent Operatiing This SD to 3.5 40Pin IDE adapter clear off traditional hard drive noise for a peaceful computing environment with advanced noise reduction technology. System Installation Converts Secure Digital Card into IDE compatible hard drives. Install operating systems directly on SD cards for faster boot times and improved system responsiveness. High-Speed Data Transfer The SD memory card to IDE hard disk drive adapter supports PIO Multiword DMA and Ultra DMA modes ensuring efficient data transfer rates up to 133 MBs. Universal Compatibility Converts SD cards to standard 40-pin IDE interface with dimensions of 8x6.8cm, mini board design and save space for broad device compatibility. Complete Package You will receive 1pc premium ABS construction adapter with durable black finish for immediate setup and use, ideal for many devices that required a fast and easy bootable device such as for POS.

A Single Slot high-speed CF card interface, ensure the speed with almost no loss. Supports CF true IDE modememory mode IO mode. Support WiFi Secure Digital Cards. Supports WindowsMac OSLinux. The adapter does not include a memory card.

Function Converts Compact Flash CF memory card to 2.5-inch IDE 44-pin interface. Compatibility Ideal for laptops and devices with a 2.5-inch IDE 44-pin connector. Design Right-angle adapter for space-saving and easy installation in tight spaces. Convenience Allows the use of CF cards as a solid-state drive SSD in older laptops. Durability High-quality components ensure reliable and long-lasting performance. Package Includes One CF to 2.5-inch IDE 44-pin adapter converter.

Please set the ide hard disk jumper to Master.. The convert PCB can not work for CDDVD-ROM.. You need to connect the power for the PCB.. Please set the SATA motherboard as IDE or PATA mode at BIOS.. IDE 100 133 PATA to Dual Serial SATA 7PIN Adapter Reversible Converter for Hard Disk Drive.

Connects SD Cards To IDE This adapter allows you to connect SD cards to your computer's IDE port for data transfer.. Supports DMA And Ultra DMA Mode The adapter works in DMA and Ultra DMA mode for faster data transfer speeds.. Male To Male Connector This adapter has a male to male connector for connecting to your computer's IDE port.. Compatible With Most IDE Drives The adapter is compatible with most IDE hard drives and solid state drives.. Black Color This adapter has a black color finish for a sleek and professional look..

Please note Used with NGFF BM-key SATA SSD ONLY. It doesn't work for M-key and NVME SSD.. M.2 NGFF BM-Key SATA SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure for Laptop.. This adapter using JM20330 Serial ATA Bridge Chip.. Case Size70mm x 100mm x 9.5mm..

You have to format with FAT32 when you install OS on the CF memory,Use CF card as DOM power supply from external floppy drive power socket.. You can save money by using CF memory card when you test on computer. Computer is rebooted suddenly because of electrical signal at electric factory.. In this case, CF memory card has the low extent of the damage.. CF Compact Flash Merory Card to 50pin 1.8 Inch IDE Hard Drive SSD Converter Adapter It is stable and doesn't have any noise and vibration. Masterslave etting jumper PCB color Black or Green.

2.5 inch IDE 44Pin SSD or HDD Drive to SATA converter Board. Works with all IDE 44Pin Drives up to 500GB. Supports IDE 66100133MBs . No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable.. Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.. Dimensions 2.72 x 0.55 x 0.69 L 69mm x D 14mm x H 17mm . Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux..

IDE 44Pin Disk to SATA Female Converter Adapter PCBA for Laptop 2.5 Hard Disk Drive 2.5 inch IDE 44Pin SSD or HDD Drive to SATA converter Board. Works with all IDE 44Pin Drives up to 500GB Supports IDE 66100133MBs. No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable.. Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.. Dimensions 2.72 x 0.55 x 0.69 L 69mm x D 14mm x H 17mm Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux..

SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop 2.5 Hard Disk Drive 2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board. Works with all SATA Drives up to 500GB Supports IDE 66100133MBs. No need for an extra power supply. 44 Pin IDE connector powers the Drive no other cables or adapters are needed. No driver needed, plug and play, unit is not hot swappable.. Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.. Dimensions 2.72 x 0.55 x 0.69 L 69mm x D 14mm x H 17mm Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux..

Support 163264128GB Standard SD card.Support SD SDHC SDXC MMC. Can put the SD card to the CF type I slot.. Camera SD SDHC SDXC to High-Speed Extreme Compact Flash CF Type I Memory Card Adapter. it may can fit your card if your camera model number are not listed in the description, please feel free to contact us to confirm the compatibility.. No Memory card in the package..

compatible with mmc system specification 2.0, ide sd card reader, sd memory card specification 1.0, sdhc memory card.. bootable solution for pc this converter is specifically designed for sd cards convert to ide interface, which worksstandard ide storage device.bootable solution for pc installation and applications of os.. the workstation has no hard disk noise.compatible with dos, linux, sd to ide 44pin, 98se, me, 2000, and vista.. features 40 pin computer power connector.. youinstall the operating system on an sd card. compatible with dos, linux, 98se, ide to sd adapter, me, 40 pin pata to ssd drive adapter, 2000, and vista..

Easy Installation This compact flash adapter requires no driver installation, making it simple to set up and use, saving you time and effort. Led Indicators Equipped with three led indicators for power, active, and detect status, providing clear and immediate feedback on the adapter's operation. Space-Saving Design The mini board design of this cf to ide adapter ensures it does not occupy much space, making it ideal for compact setups. Versatile Compatibility Compatible with cf type i and type ii cards, this adapter is perfect for converting cf cards to ide hard drives for various applications. Standard 50-Pin Socket Features a 50-pin standard socket, ensuring reliable and stable connections for your cf to ide conversions.

What it does The module Micro SD Card Adapter is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card.Arduino users can directly use the Arduino IDE comes with an SD Card to complete the library card initialization and read-write.. Built-in level adjustment The module built-in level regulator circuit, level conversion circuit board that can interface level is 5V or 3.3V.. Specifications Voltage 4.5V5.5V DCCommunication Interface Standard SPIInterface Voltage Level 3.3V or 5VApplicable card type Micro SD Card, Micro SDHC Card.. Easy to read signal Micro SD card to signal the direction of converts 3.3V, Micro SD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.. Standard interface The communication interface is a standard SPI interface, easy to connect to any device with SPI interface2 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination..

Connect a CF card to a computer through an IDE connector. Compatible with compact flash memory cards and desktop computers with an IDE slot. Compact flash IDE adapter CF to IDE adapter CF to IDE converter IDE to CF card reader. Compact flash adapter. Quick and driver free installation into any IDE 40 pin and 44 pin slot.

Provides an alternative of data storage, and test for Motherboard and Sounddisplaymemory card.. An ideal device for equipment that needs booting fast and easily such as POS. Be a SDMMC Card readerwriter.. Compatible with .1 specifications, MMC2.0 specifications and SDHC Memory Card specifications.. Supports 32GB-64GB SD card capacity.. Supports data rates of 22MBs..

Masterslave etting jumper. In this case, CF memory card has the low extent of the damage.. You have to format with FAT32 when you install OS on the CF memory. You can save money by using CF memory card when you test on computer. Computer is rebooted suddenly because of electrical signal at electric factory..

2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board. Works with all SATA Drives up to 500GB. Supports IDE 66100133MBs. 44 Pin IDE connector powers the Drive no other cables or adapters are needed.. No driver needed, plug and play, unit is not hot swappable..

Connect your SATA IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Compatible read up to three hard drives simultaneously. One Touch Backup OTB Function. Design for people who need to backup data from your computer to portable hard drive. Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux. Plug and Play, Hot- swappable, no driver needed. OnOff Switch design for HDD protection. Led light shows power and activity status.. Support 2 IDE and 1 SATA hard drives connecting simultaneously Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive. SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected.

The SD Card to 2.5 Inch IDE Adapter Adapt SDMMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.. Enables IT engineers and embedded technology enthusiasts to use SDMMC card as a normal IDE 2.5 hard disk.Provides an alternative for data storage and transfer or test for motherboard, soundaudiomemory card, etc.. Ideal for some devices that required a fast and easy bootable device such as POS. Be a SDMMC card readerwriter.Compatible with SD, SDHC, SDXC MMC specification.One 2.5 IDE hard disk driver 44pin male connector and one standard SD socket.. IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions 36mm x 52mm.. Attention This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..

No external power required. Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, 7 Linux.. Ideal for iPod Toshiba 1.8 IDE micro drive to connect to laptop.. 1.8 micro IDE hard drive can be detected and used as a regular 3.5 laptop IDE hard drive.. Allows you to connect a 1.8 micro IDE hard drive to a laptop IDE cable. One end is micro IDE 50-pin male connector and another end is IDE 40-pin male. It is recommended to be used for backups or direct data transfers. Bootable, install OS and application. No external power required. Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, 7 Linux. . It is recommended to be used for backups or direct data transfers. Bootable, install OS and application..

Convert SD , SDHC , MMC to an IDE compatible hard drive. Four legged computer power connector.

Item Package Dimension 5.39L x 3.82W x 0.98H inches. Item Package Weight - 0.11 Pounds. Item Package Quantity - 1. Product Type - ELECTRONIC ADAPTER.

This card converts two TF memory card interfaces into CE interfaces the CE interface has 40 PINs. If you are not sure whether the interfaces are consistent, you can count the number of interface PINs.. Suitable for laptops, game consoles, test manufacturers, special industrial controls, etc. with CE hard disk interface. The TF memory card can be converted into a product with CE hard disk interface, and the TF card can be used as a 1.8inch CE electronic hard disk. Use TF card to replace CE interface hard disk. Support high capacity tf card,Anti-interference design, stable and reliable.

1. POWER Power Supply Block available hard disk power supply, the card only 5V power supply, the normal operating voltage of 5V 0.25V. Operating current is less than 200mA.. 2. IDE socket please use 80 PIN hard drive cable. The card supports PIO, Multi-word DMA and Ultra DMA Host data transfer mode. 3. For SD socket supports up to 128GB SD card.. 4.Connect the power cable and IDE cable, insert SD card in the SD socket, the conversion board that is equivalent to an electronic hard disk, without having to install the driver. After installing the operating system, you can boot the operating system via an SD memory card such as windows98, etc... The adapter card is to let you use this superior SD card connected to the standard ATA IDE interface, when the standard IDE storage device..

COMPATIBILITY Converts SD card to IDE 3.5-inch 40-pin disk drive interface, supporting SD cards up to 128GB capacity. INTERFACE Features standard 40-pin IDE connector and dedicated SD card slot for direct connection to motherboard or systems. POWER SUPPLY Includes 4-pin power connector for stable 5V operation with FDD power input. STATUS INDICATORS Built-in LED indicators for power, card detection, and active status monitoring. DESIGN Compact PCB layout with high-quality components and clearly labeled connectors for easy installation.

Support SD3.0 SDHC SDXC. Support WiFi SD. Support UDMA6. Supports CF true IDE modememory mode IO mode. A high-speed CF card interface, ensure the speed with almost no loss.

The SD Card to 2.5 Inch IDE Adapter Adapt SDMMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.. Enables IT engineers and embedded technology enthusiasts to use SDMMC card as a normal IDE 2.5 hard disk. Ideal for some devices that required a fast and easy bootable device such as POS. Be a SDMMC card readerwriter.Compatible with SD, SDHC, SDXC MMC specification.. Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.. Enables SDMMC card as a normal IDE 2.5 hard disk,Provides an alternative for data storage and transfer or test for motherboard, soundaudiomemory card, etc.. NOTE This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..

COMPATIBILITY Allow MSATA SSD to be used as a laptop 1.8 inch 44pin IDE SSD .Support 3.3 V Mini PCI E SSD MSATA Module. NOTE The card can only be connected to 1.8 3.3V IDE interface, connected to 2.5 IDE interface to burn the core. UNIQUE DESIGN Designed for MSATA SSD, MINI PCIe PATA or SSD is not supported. 44pin standard male IDE connector. USAGE Convert 1.8 inch IDE hard drive with MSATA SSD SSD, connect your thinkpad x40 x41. APPLICABILITY With for DOS 3.1NT498SEME2000XPVistaUNIX compatible.

MULTIFUNCTIONAL ADAPTER Transform your SD, SDHC, MMC memory cards into IDE-compatible drives effortlessly with this SD to IDE adapter. Ideal for upgrading older systems, this device brings modern functionality to computers, enhancing compatibility without sacrificing storage efficiency.. BOOTABLE PC SOLUTION Unlock the full potential of your SD cards as bootable drives with this SD to IDE adapter. Simply install your operating system directly on the SD card to enjoy faster boot times and reliable performance. This feature is for DIY enthusiasts and tech-savvy users looking to optimize their systems.. EASY POWER CONNECTION The adapter features a convenient four-legged computer power connector, making installation straightforward and hassle-. Experience a seamless connection to your existing computer setup, minimizing downtime and ensuring a stable power supply to your converted drives.. QUIET OPERATION Say goodbye to disruptive hard drive noises with this innovative SD to IDE solution. By utilizing memory cards as storage, your workstation operates silently, creating a quieter and more focused work environment. for noise-sensitive settings or home offices, this feature enhances your overall computing experience.. ROBUST SYSTEM COMPATIBILITY Enhance your computer's functionality by converting your SD, SDHC, SDXC, and MMC cards into IDE drives using a 40Pin male connector. This versatile adapter supports a wide range of memory cards, making it an essential tool for upgrading and maintaining older systems with modern storage capabilities..

A Double Slot high-speed CF card interface, ensure the speed with almost no loss. Supports CF true IDE modememory mode IO mode. Support WiFi Secure Digital Cards. Supports WindowsMac OSLinux. The adapter does not include a memory card.

QUICKLY ACCESS TO SATA IDE SSDHDD Hard drive adapter supports SATAIDE 2.53.5 SSDHDD, 5.25 external CD DVD optical drive This Adapter allows us to retrieve the data and move it to a functioning hard drive. with dual-head IDE Connector 40pin and 44pin plus one SATA II Connector. SUPERSPEED UP TO 5Gbps with USAP IDE hard drive reader supports a data transfer rate of up to 5 Gbps and supports UASP. which is 70 Faster than traditional USB 3.0 and 40 reduction in required processor resources, Backward compatible with USB 2.0 1.1. HUGE 6TB CAPACITY SUPPORT Designed to be lightweight and compact. hard drive recovery converter supports a hard drive capacity of Up to 6TB capacity, Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turn on the disk. ADDITIONAL FUCTIONS EASY TO USE USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for powering up the 5V12V IDE devices usage, ensures SATA HDD can be connected well. The 4-pin power cable is designed for a 3.5 IDE drive the LED light shows power and activity status. SIMPLE RECOGNIZED With plug-and-play functionality, hard drive to usb adapter eliminates the need for additional drivers or complex setup procedures, Warm Tip Windows can only recognize and assign a drive letter to drives that are formatted in a compatible way. If this is a new drive, you need to format. COVERTER WITH BROAD COMPATIBILITY You can use IDE drives, standard SATA drives, The USB to IDE SATA adapter compatible with Windows 10 8.1 8 7VistaXP, Mac IOS, and LINUX Plug and play support hot swap.

Universal SATAIDE Hard Drive Adapter It can support 2.5 3.5 SATA IIIIII Hard Drive and 2.5'' SATA SSD 2.53.5 IDE Hard Drive DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW. This usb universal hard drive adapter supports up to 16TB hard drives, which is a perfect solution for backup processing IT data, batch processing data, formatting, file transfers etc. Super Speed USB 3.0 USB 3.0 supports transfer rates of up to 5GbpsThe actual transmission speed is limited by the setting of the device connectedDownwards compatible with USB 1.12.0.. Pulg Play Support Plug and play hot swap, OnOff power Switch for Hard drives protection. Tips Some IDE hard drive is old, you need to set jumper to turn on the disk set the master disk and the slave disk.. System Compatibility Support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux etc. Support devices PS4XboxTVmonitoring equipment.. Customer Focus Our goal is to give you a 100 satisfaction shopping experience and we provide one-year warranty..

Convert SATA to IDE with Ease Effortlessly connect any SATA hard drive or SSD to an IDE motherboard, allowing compatibility with older systems and legacy hardware.. Supports 2.5 3.5 HDDSSD Designed for versatility, this adapter works with both 2.5-inch and 3.5-inch SATA drives, making it perfect for upgrading older computers.. Broad SATA Compatibility Fully compatible with SATA I, SATA II, and SATA III hard drives, ensuring seamless data transfer across different generations of storage devices.. Plug Play Installation No drivers required Simply plug in the adapter for a quick and hassle-free setupideal for tech enthusiasts and professionals alike.. Extend the Life of Older Systems Breathe new life into legacy computers, industrial machines, or gaming consoles by upgrading to modern SATA storage.. Compact Durable Design Lightweight yet sturdy construction ensures reliable performance without taking up extra space inside your PC or enclosure.. Versatile Use Cases Perfect for system backups, data recovery, retro computing, and repurposing old hardware for extended use..

One Female SATA 715pin port, one 3.5Male PATA port 40-pin IDE, and one 4-pin Molex power connection Adapter. Adapter allows you convert hard drive interfaces to work with newerolder systems Supports ATA. Converts Parallel ATAPATA, ATA, IDE to Serial ATA SATA Converts SATA to PATAATAIDEEIDE. This SATA to IDE Adapter,No driver needed, plug and play. Package Contents Sata to Pata Interface Adapter 1PCS.

Standard 2. 5 Ide form Factor. Led indicators power on, master, slave, drive activity. Supports UDMA IDE interface. Can be utilized as a primary Boot device. 2 CF cards slots supporting CF Type 1 form factor.

UNIVERSAL HARD DRIVE READER SATA and IDE to USB 3.0 adapter supports 2.53.5 HDDSSD, 2.53.5 IDE, 5.25 DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW optical drive. With dual-head IDE connector 40pin and 44pin plus one SATA III connector, lt's compatible with 2.53.5 DESATA hard drives. 5G BPS HIGH SPEED TRANSFER This IDE to SATA Hard Drive adapter is designed with a USB 3.0 port that supports high-speed, enabling data transfer rates of up to 5Gbps. Data transfer process is exceptionally simple and effortless. Additionally, our ultra recovery converter maintains backward compatibility with USB 2.0 USB 1.1. HUMANIZED DESIGN This ide hard drive converter adopts a 2-IN-1 USBUSB-C portdesigned, USB to USB-C adapter that plugs into the USB port to match your laptop and is not limited by the computer model. It also supports hot swapping, allowing you to connect or disconnect drives without having to restart your computer. Onoff switch for HDD protection and the LED light indicates power and activity status. STABLE POWER SUPPLY Our USB 3.0 to IDE SATA adapter comes with a 12V2A power adapter, for 3.5 IDE drivers and old SATA HDD, you need to connect this power adapter and 4-pin power cable for a better connection. If you want to use old IDE hard drive, please set a jumper and set it to slave. The actual transmission speed depends on the Settings of the connected device. WHAT YOU WILL GET Package included Hard driver readerx1, 4-pin power cablex1, 12V2A power adapterx1, USB C and USB 2-In-1 cablex1, manualx1. Tips This IDE to USB adapter default master is a 2.5 IDE hard drive, if your hard drive is new, please go to Disk Management to initialize it first so that the hard drive can be recognized. IMPORTANT Please read before use 1 3.5 HDDSSD MUST use the included 12V2A power adapter and 4-pin power cable otherwise the drive will not work. 2 For any new drive, you MUST initialize and format it in Disk Management before the system can recognize it. 3 For desktop computers, please connect to rear USB ports motherboard direct for stable power..

ULTRA FAST DATA TRANSFER - USB 3.0 brings you fast and reliable 5Gbps photo, video transfer from camera to laptop, reducing transfer time and improving your work efficiency. Backward compatible with USB 2.0 1.1.. READ WRITE SIMULTANEOUSLY - uni USB to SD Card Adapter can read and write 2 cards at the same time, transfer your materials without transit and re-insert. Ideal for photographers, and media professionals.. COMPACT DESIGN - Easy to insert and remove your cards with the spring loaded mechanism. The extra braided nylon cable is device friendly with a compact interface design. Will never interfere with other accessories. The aluminum case has better heat dissipation and higher durability, prolonging the product life well.. PLUG PLAY - No additional software or driver required, also fully powered by your USB port, no additional power supply needed. Driver free, use it on your Windows, macOS, Chrome OS, Linux laptops PCs.. UNIVERSAL COMPATIBILITY - The SD card adapter supports up to 2TB card capacity, expanding the range of available cards. Compatible with SD, SDXC, SDHC, MMC, RS-MMC, Micro SDXC, Micro SD, Micro SDHC and UHS-I cards. see description for compatibility. WHAT YOU GET - uni High-Speed Memory Card Reader with 247 customer support and hassle-free 18 months warranty. Please rest assured that our professional technical support team stands behind our products and our customers..

PRO IDE HARD DRIVE CONVERTER - Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. Support SATA 2.53.5 HDD up to 10 TB, IDE 2.53.5 HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Allowed to operate three hard disk drives simultaneously.. TYPE C 5GBPS USB 3.0 - Super speed Data transfer, backward compatible with USB 2.01.1. Support Windows XPVista7810 and Mac OS.. STABLE POWER SUPPLY - Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5 IDE drive.. PLUG AND PLAY - Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. WHAT WE OFFER - SATAIDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1 24h-friendly customer service and email support..

Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector.. Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1.. Included 12V 2A power cable is for providing stable electricity supply. Note 4PIN Power Cable is designed for 3.5 IDE drive, SATA drives are not applicable and unnecessary.. Plug and play Hot Swap One Touch Backup function OnOff Switch for HDD protection. LED light shows power and activity status.. Note Please download the OTB software to use the One Click Backup feature, and check the network manual for details if necessary.. What we offer USB 3.0 to IDESATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, 24h customer email support..

Wide Compatibility Our SATA adapter supports a wide range of storage devices, including 2.53.5 SATA HDDs and SSDs, 2.53.5 IDE HDDs, as well as DVD-ROM, CD-ROM, CD-RW, DVD-RW, and DVD-RW optical drives. It features a dual-head IDE connector 40-pin and 44-pin, along with a SATA III connector, allowing you to connect and operate two drives simultaneously one IDE one SATA.. Fast Speed With data transfer rates of up to 5 Gbps, you can expect fast and efficient file transfers. The sata to USB C adapter is backward compatible with USB 2.01.1 for added convenience.. Stable Power Provided To ensure stable power supply, we provide a 12V 2A power cable. Additionally, the 4PIN Power Cable is specifically designed for 3.5 IDE drives.NOTE The included 4Pin power cable is only required for 3.5'' IDE HDDs, no need to plug it in a 3.5'' SATA HDD even it comes with 4 big power pins.. Human-Friendly Design Our SATAIDE adapter is plug and play, allowing for easy installation and use. It also supports hot swapping, enabling you to connect or disconnect drives without the need for restarting your computer. The adapter includes an onoff switch for HDD protection, and the LED light indicates power and activity status.. Package 1 X SATAIDE Adapter, 1X USB 3.0 Cable, 1 X 12V2A Power Adapter, 1 X 4Pin Power Cable. We take pride in offering top-notch customer support. If you have any questions or concerns, our dedicated customer email support team is available 247 to assist you..

Multi-drive hard drive reader This universal hard drive reader supports 2.53.5 SATA HDDSSD and IDE drives, allowing up to three drives to be connected at the same time for data backup, file transfer, or recovery tasks.. High-speed USB 3.0 performance Equipped with USB 3.0, this SATA to USB and IDE to USB adapter delivers data transfer speeds up to 5Gbps with UASP support, while remaining backward compatible with USB 2.0 and 1.1 devices.. IDE to SATA adapter for large drives Compatible with SATA III and IDE drives up to 6TB, this adapter works with SATA SSD, HDD, and legacy IDE storage, making it suitable for storage expansion and data recovery use.. Wide system and device compatibility Works with Windows, Linux, and Mac OS 9.010.13.3, as well as PS4 and Xbox One. Supports HDDs, SSDs, and optical drives such as DVD-ROM, CD-RW, and DVD-RW, functioning as an external hard drive reader or ultra recovery converter zilkee ultra recovery converter 2025 search use.. Complete SATA to USB adapter with power supply Includes USB 3.0 to IDESATA adapter, USB 3.0 cable, 4PIN power cord, and 12V2A power adapter. Plug-and-play design allows quick setup without additional drivers..

Single CF Card Compatibility Converts Compact Flash memory cards into standard IDE hard drives. Enables bootable storage for LINUX, WINCE, or custom applications.. Embedded System Integration Ideal for industrial PCs requiring compact, low-. Supports direct insertion into notebook IDE ports for retro computing.. Plug-and-Play Simplicity No drivers or software needed for operation. Works with CF cards up to user-specified capacity for scalable storage expansion.. Compact Form Factor Measures 53 x 44 x 5mm and weighs 5g for discreet installation. Fits 2.5-inch drive bays without obstructing adjacent components.. Hardware Revival Extends lifespan of older laptops or POS systems by replacing outdated IDE drives. Includes one adapter card per purchase..

IDE CONNECTOR TYPE This 3.5-inch 40-pin IDE adapter is designed for desktop PCs, providing a perfect fit for standard IDE storage devices. Ensure compatibility with your desktop setup before purchase.. SD CARD COMPATIBILITY Supports SD, SDHC, and SDXC memory cards, offering flexibility for various storage needs. Ideal for users requiring high-capacity storage solutions up to 128GB and beyond.. POWER REQUIREMENTS Requires an external 5V 4-pin power connector, ensuring stable performance and reliable data transfer. Perfect for setups with dedicated power supplies.. OPERATING SYSTEM COMPATIBILITY Compatible with DOS, , 98SE, Me, 2000, and Vista. A versatile solution for users of older operating systems seeking reliable storage options.. BOOTABILITY Allows installation of operating systems on SD cards, providing a bootable solution for PCs. Ideal for POS systems and devices requiring fast, easy bootable storage..

Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc.. SD to IDE 2.5 Converter is ideal for some devices that required a fast and easy bootable device such as POS.. Enables IT engineers and embedded technology enthusiasts to use SD MMC card as a normal IDE hard disk.. Package Included1Pcs SODIALR 44-Pin Male IDE To SD Card AdapterIf there are any problems with the product, please send us pictures.Tell us more details about this problem.. Thank you so much for your purchasing from our store.Any question ,please feel free to contact us..

Adapt SDMMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD. Enables SDMMC card as a normal IDE 2.5 hard disk. Provides an alternative for data storage and transfer or test for motherboard, soundaudiomemory card, etc.. Ideal for some devices that required a fast and easy bootable device such as POS. Be a SDMMC card readerwriter.Compatible with SD, SDHC, SDXC MMC specification.One 2.5 IDE hard disk driver 44pin male connector and one standard SD socket.. Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions 36mm x 52mm.Attention This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..

Converts Secure Digital Card into IDE compatible hard drives.. Compact Design4-pin computer power supply connector.. Bootable solution for PC.You can install the OS onto the SD Card.. The data transfer rate is high and the speed is almost the same as that of the system hard disk ATA133, U-DMA mode3.. Compatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card.Compatible with DOS, Linux, Windows 98SE, Me, 2000, XP and Vista..

Supports CF-I and CF-II two types of cardsIBM micro hard disk that also supports CF-II interface.. The IDE interface is a 40-pin2.54mm female connectorthis card can be plugged directly into the IDE socket.. Standard IDE interfacetrue-IDE mode,and supports DMA-33 transfer mode.Power supply from 5.0V or 3.3V,Select the appropriate supply voltage according to your CF card.. Widely used in notebook computers,personal digital assistantsPDAs, portable instruments,or industrial equipment.. Package included1pcs CF to 40-Pin IDE Adapter.It has the characteristics of low power consumption and no damage..

Attention Some of the mother board required to enable LBA mode and disable DMA transfer mode..

SD to 3.5 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS.. Enables IT engineers and embedded technology enthusiasts to use SDMMC card as a normal IDE 3.5 hard disk.Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc.. Compatible with SD Memory Card specification 1.1, MMC specification 2.0, SDHC Memory Card. SD socket support maximum 32GB SDHC card Support PIO, Multi-Word DMA and Ultra DMA data transfer mode. Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista Linux. Bootable, install OS and application on SD card.. Easy installation and no driver required.Mini board design and no space wasted. Ompatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card.. Attention Some of the mother board required to enable LBA mode and disable DMA transfer mode..

CompactFlash Card adapter. IDE. black.

Chipset Satalink Spif223a. Supports 3.5-inch SATA and IDE ATA Hard Drive 5.25-inch SATA and IDE ATA Optical Drives. LED Indicators Power-On and HDD-Activity. Ultra Low Power Consumption. Two Independent Ultra ATA Channels with 128256 Bytes Buffer Per Channel. 40 Pin IDE interface. Supports SATA Generation 1 with transfer rate up to 1.5Gbps. Supports MasterSlaveCable Select mode by configuration switches.