CNC machined from 7075 Aluminum, black or silver anodized. One piece housing construction, offset C-hubs is machined into the housing for strength, durability, clearance and scale appearance. Quality heat treated S2 steel front axle VDI shaft , rear axle shafts and portal stub shafts, large increase in strength. Machined and hardened ring, pinion and portal gears, Stronger than stock substantially. 8T 30T ring and pinion gear set, 12T 23T portal gear set, 7.191 gear ratio. Front axle weight 307g 0.68 Pounds. Rear axle weight 218g 0.48 Pounds.. Increased Caster Angle to 20 for improved steering, 50 of side to side steering. 5 over stock CapraSCX10 III axles. 195mm Width Pin to Pin, Slightly wider than Axial SCX10.3, and slightly narrower than Axial Capra. Two servo mounting options are available A Use the removable Panhard3rd link mount as a CMS option. Chassis-Mounted Servo. B Use the removable BTA mounts as a AMS option. Behind Axle Mounted Servo. Shipped fully assembled, includes complete front and rear axles.

Product Size Rc axles 110 shaft length is about 6.6in, the installation hole distance is about 3in, and the adjacent hole distance is about 0.5in. Before purchasing rc 110 axles, please check size so that you buy right product. Metal Material Metal non powered rear wheel is carefully made of metal material, with a certain hardness, which is sturdy and practical. Rc front axle metal kit have a long service life and can meet your long-term use needs. Use Precautions When installing and using rc wheel axle, avoid tightening it too much and locking bearing shaft. Before using rc wheels axle, you can apply lubricating oil to lubricate bearing shaft to make it work more smoothly. Practical Tool Remote control axles can not only be used for the rear axle of 110 rc trailer, tractors, flatbed trailers to enhance the performance of your vehicle, but it can also serve as little helper for your DIY vehicle. Easy to Install Remote control axles rc is light in weight, not only the installation process is simple and quick, but it also has no additional burden on the RC car, which can tear to extend the service life of your 110 trailer.

SCX10 Servo Axle MountNon-destructive installation, mounts directly on the original axle, need to replace the short steering rod. 110 RC Axle MountMore reasonable servo position layout to improve the performance of the suspension system. Provide stronger support, which can be matched with stronger servo.. RC 4-link SuspensionHigh-Quality Material - The SCX10 III Servo Mount is crafted from premium 7075 aluminum alloy using CNC processes, offering high strength and resistance to corrosion . If you have any concerns about our SCX10 III Servo Mount, our support team is always available to assist you .

Suitable for Axial SCX10 II SCX10 III SCX10 PRO equipped with AR44 AR45 Axle.. Made of high quality steel and precisely CNC machined for greater durability and hardness.. Same ratio as stock diff gear set.. Bolt on installation, perfectly matches with stock AR44 AR45 Axle.. Package includes 8T-30T diff gear set1..

CNC machined aluminum housing, one piece housing construction, black or silver anodized. Offset front pumpkin, integrated Panhard mount, link mount built into the housing. Integrated inner c-hubs, with easily replaceable steel threaded inserts for the knuckle kingpin screws. Double shear shock mounts. Quality heat treated steel VDI universal and rear axle shafts, quality sealed bearing kit, machined hardened AR44 style gear set, with greater strength and smooth operation. 30T 8T ring and pinion gear set. 190mm wide, hex to hex face. Front axle weight 253g 0.56 Pounds. Rear axle weight 153g 0.34 Pounds. These axles works with SCX10 II, VS4-10 chassis, the front axle is three link with Panhard link suspension system. Offset pumpkin clearance gives additional clearances over centered axle and does ERASE NOT work well under many other chassis designs. Shipped fully assembled, includes complete front and rear axles.

Precision CNC-Machined Aluminum Construction The F10T Straight Axle is expertly crafted from high-quality aluminum, ensuring exceptional strength, lightweight performance, and superior durability. Its anodized clear and black finish provides added corrosion resistance while maintaining a sleek, scale appearance.. All-Inclusive Axle Assembly with High-Quality Components The complete axle assembly includes all necessary hardware, bearings, and gear sets, allowing for straightforward installation and optimal fitment. The fully machined hardened AR44-style gear set 308 standard ratio ensures efficient power transfer and reliable performance in demanding RC crawling conditions.. Enhanced Durability and Structural Integrity Engineered with removable third member and one-piece bearing retainers, the axle assembly provides robust structural support, while the integrated inner C-hubs with steel threaded inserts offer maximum strength and secure knuckle kingpin attachment, reducing the risk of loosening during rough terrain driving.. Integrated Panhard and Link Mounts for Seamless Suspension Setup Designed with built-in Panhard and link mounts, the axle assembly streamlines suspension configuration, delivering improved handling, stability, and articulation. The double shear shock mounts further enhance the axles load-bearing capability and shock absorption.. Optimized Axle Dimensions and Scale Appearance The axles 185mm pin-to-pin and 192mm hex-to-hex face dimensions provide a precise, scale-accurate stance, making it a perfect fit for SCX10 II, VS4-10 Phoenix, and other compatible RC models. The offset front differential housing and premium heat-treated steel VDI universal and rear axle shafts complete the robust assembly, ensuring smooth power delivery and reliable performance..

Compatible withThe upgrade parts for 110 RC Crawler Car Axia 1 SCX10 III. Such as for AXI03027T1, T2, T3 AXI03003T1, T2 AXI03006BT1, T2 AXI03007, etc. Only NOT for scx10 iii Ford Bronco AXI03014.. High Quality Material The upgrades part is made of quality solid brass,wear-resistant,strong and durable,can use for a long time.. High Quality Material The Front Rear Axle Housing upgrades part.Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance.. Long-lasting Performance The RC Hops Up is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance.. Special noteIn the position of various screw holes, screw glue is applied, so that the screws are not easily separated from the upgrade accessories..

Fits For RC Upgrades Part Front Rear Axle for 110 SCX10 SCX10 II 90046 90047 RC Crawler Car.. Made of High-quality MaterialAluminum alloy structure, built to withstand hard driving, collision and abuse. Strict strength and rigidity provide unparalleled durability.. Long-lasting PerformanceThe RC Hops Up is durable enough,Superb Craftsmanship, lightweight and durable,Made your RC Crawler More Attractive and Cooler.. Easy to InstallEasy to install, great for replace the old or broken part.Increase overall performance and durability of your RC car.. Special noteIn the position of various screw holes, screw glue is applied, so that the screws are not easily separated from the upgrade accessories..

SCX10 Drive Shaft The drive shaft is CNC machined from industrial-grade 304 stainless steel, boasting excellent rust resistance and outstanding strength. Even under challenging crawling conditions, it can withstand harsh off-road terrains and demanding operations, ensuring its sustained superior performance.. Enhance your RC crawling experience Under precision-designed components, the driveshaft offers smooth and consistent power transmission, enhancing your remote-controlled driving experience with seamless acceleration and responsive handling. Moreover, the drive shaft is specifically designed to address installation issues associated with larger options.. Precise Assembly Every component of the SCX10 driver shaft undergoes stringent precision engineering to ensure tight, seamless assembly, minimizing play and ensuring optimal power transfer, thereby enhancing stability and control during operation, allowing you to confidently push the limits of your RC vehicle.. Fixed-length cutting for easy installation The driveshaft features a fixed-length cutting design with a length range from 68mm to 229mm. Simply select your desired length, trim the ends accordingly, and easily assemble using the included fixing screws. This design allows flexible adaptation to different RC vehicle configurations, providing versatility and adaptability for various setups and applications.. Multifunctional compatibility Designed to accommodate crawler vehicles, scalers, and sport RC cars, the drive shaft features standard 5mm inputoutput ends and keyed keyways for precise U-joint alignment. Engraved millimeter measurements provide precise cutting guidance for seamless installation, offering multifunctional compatibility and making it a versatile upgrade option for hobbyists and enthusiasts..

This portal axles kit is a game changer for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Made of high quality aluminum alloy, equipped with 40CR 6mm output shaftlonger than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. Isokinetic 3-section CVD ensures that there is no jerks when turning at large angles, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. Comes with upgraded smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structrue allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-driiled hole on front axle for thrust rod installation for better stability.. Package includes front axle and rear axle, steering links3..

Fits ForUpgrades Part Portal Axles For 110 DIY SCX10 SCX10 II,Capra 1.9 UTB 4X4 4WD. Anodized 6061-T6 aluminumFront Rear Portal Axles precision CNC machined,lightweight and durable,increase the long-lasting durability,of High quality of aluminum. High Quality MaterialFront Rear Portal Axles wear-resistant, strong and durable, can use for a long time.. Easy to Assemble The upgrades part set is easy to replace original parts, highly increase the strength and precision.. Upgrades partExcellent upgrades part, better experience the fun of RC car,making your RC car more exquisite and beautiful..

Fit forThe rc Upgrades Parts fit for 110 SCX10 III.Such as AXI03027T1, T2, T3 AXI03003T1, T2 AXI03006BT1, T2 AXI03007, etc. But NOT For scx10 iii Ford Bronco AXI03014.. High Quality MaterialRC Hops Up Made of quality aluminium alloy and brass, CNC machined for precision, increased strength and precision, easy upgrade from the original part.. Increase the Stability. The rc upgrade parts add weight to each wheels,thus reducing the gravity of the vehicle and increasing the stability.Greatly help to the wheels grabbing for the vehicle more capable crawler.. Easy to InstallThe RC Upgrades can be directly installed to replace the old or broken differential,do not need any modification.. Kindly ReminderPlease stick screw glue on any metal-to-metal joint to make the product more stable.Especially in the position of various screw holes.So that the screw is not easy to be separated from the upgrading fittings..

Designed for 110 Axial SCX10 II RC Crawler, AR44 metal upgrade axle , also Fit for SCX10 ,RGT86100,CC01, Element Enduro Vanquish VS4-10 RC Crawler. The front axle is 4 link with Panhard link suspension systemHardened steel gears and drive shaft,High Quality Aluminium Alloy Material. The upgrades part is durable enough,Superb Craftsmanship, Made your RC Crawler More Attractive and Cooler.. The upgrades part set is easy to replace original parts, highly increase the strength and precision.. CNC processing RC front and rear axle kit with anodized and hardened surface, steel spiral gear, excellent quality. Novel appearance and exquisite workmanship, Servo structure on the axle steering force is more stable..

Billet Aluminum Housing, Smooth Anodized Coating, Compact yet durable design ,Hardened Steel Gears Bevel Gear Set 29T8T. Hardened Steel Construction Driveshafts,Full Ball Bearings,Aluminum Steering and Servo Links,Stainless Steel Pumpkin Armor. Portal Axles provide higher ground clearance and reduce the torque on other drivetrain components for improved performance.. Total Width 8.85in Hex to hex Width 8.03in Pin to Pin Width7.48in Total height added is 13mm 5.0mm Axle Output Shaft 12mm Standard Hex Links Mount Width 7.5mm Servo Mount Width 42mm Bevel Gear Set 29T8T Total Gear Ratio3.751 Front Axle 375g Middle Axle 313g, Rear Axle 290g. This axle is designed for SCX10 II chassis 4X4 RC Crawler,The front axle is three link with Panhard link suspension system..

This portal axles kit is a game changer for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Made of high quality aluminum alloy, equipped with 40CR 6mm output shaftlonger than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. Isokinetic 3-section CVD ensures that there is no jerks when turning at large angles, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. Comes with upgraded smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structrue allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-driiled hole on front axle for thrust rod installation for better stability.. Package includes front axle and rear axle, steering links3..

Fits ForFor 110 RC Crawler Car SCX10 III. Such as for AXI-1375AXI-2036AXI-3071AXI03007AXI03006B.. High-quality MaterialAluminum Portal Axles of High quality of aluminum,precision CNC machined,lightweight and durable,increase the long-lasting durability.. Long-lasting Performance Specially designed strengthening cut-outs for increased crash resistance.The upgrades part is durable enough,improves the overall performance of the rc car.. Easy to InstallIncrease overall performance and durability of your RC car.Easy to install, great for replace the old or broken part.. More DurableThe upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance..

Fits ForThe Universal Drive Shaft fits for 110 SCX10 SCX10-II Redca t D90 Gen7 Pro RC 4WD GEN8 RC Crawler.. High Reliability The drivehshaft is with more turning power and more sturdy use ,High reliability, ensuring smooth transmission.The rc car upgrades parts highly increase the strength and precision.. Long-lasting PerformanceThe long lasting and durable drive shaft provides unmatched driving versatility,it is a nice replacement accessories for the old or broken one.. Easy to InstallThe Drive Shaft can be directly installed, do need any modification. It is designed to allow more smooth rotation and strength Providing unmatched driving versatility.. Upgrades partExcellent upgrades part, better experience the fun of RC car,making your RC car more exquisite and beautiful..

Suitable for Wraith 90018 90048 90053 RR10 110 RC Rock Crawler Complete Alloy Front and Rear Axle Assembly Parts Upgraded?. Machined from aluminum and anodized for good looks. Material Aluminium Alloy Housing ,Steering Rod and Steel alloy Gear, CVD Driveshaft. Technology CNC, Anodicoxidation. ColorMatte Black.

Axial AR45P Portal Axle Housing, Front SCX10 III, AXI232022.

Perfect for 110 Axial SCX10 RC Crawler,Fine workmanship and perfect style, Easy to install and remove,. Enhanced upgrade axle shaft upgrade the structure and material to enhance the hardness stronger than old version shaft, steering point not easy to broke ,better performance and durability.. MaterialMachined from aluminum and anodized for good looks,, Steel internal gears and driveshaft .Directly replace Original plastic axles.. Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain.. High pinion gears for added ground clearance and better driveshaft angles..

The Upgrade Parts is Compatible with all kind of SCX10 III RC Car EXCEPT SCX10 III Ford Bronco AXI03014 CAN NOT FIT . Aluminum Axle Housing, steel inner gears and transmission shaft, CNC processing, novel in appearance, sturdy and durable. With a 45 steering angle, the design maximizes body stability during turns while minimizing wear between the wheel hub and axle, ensuring smoother and more durable performance. Size Total Width 220mm, Pin to Pin Width 185mm, Pumpkin Height 32mm, 12mm Standard Hex, Hex Width 6mm, Bevel Gear Set 24T8T, Portal Gear Set 23T12T, Total Gear Ratio5.751. High ground clearance,strong trafficability, more easier to cross rock obstacles..

High quality brass material with black-anodized surface and gold edges for an exquisite.appearance. Weights 81g per piece, can provide enough weight for the axle for stabler driving performance. Easy to install, replace the original plastic part without damages. Suitable for MEUS 110 nylon portal axle, can't be used on other axles. Package includes brass axle weights cover2.

Made of high quality 45 Steel for greater hardness and durability.. Replace the CVDs of the original SCX10 nylon portal axles to ensure better performance and longer service life.. CVD shafts can provide smoother movement for effective drivetrain with great performance. ONLY for MEUS 110 Nylon Portal Axle SCX10 SCX10 II 110 RC Crawler Upgrade.

Fits ForFor 110 RC Crawler Car Axial SCX10 III. Such as for AXI-1375AXI-3071AXI-2036AXI03006BAXI03007.. High Quality Material Upgrades Part is made of quality solid brass, wear-resistant, strong and durable, can use for a long time.. Long-lasting Performance Specially designed strengthening cut-outs for increased crash resistance.The upgrades part is durable enough,improves the overall performance of the rc car.. Easy to InstallIncrease overall performance and durability of your RC car.Easy to install, great for replace the old or broken part.. More DurableThe upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance..

Fits ForFor 110 RC Crawler Car Axia1 SCX10 III. Such as for AXI03027T1, T2, T3 AXI03003T1, T2 AXI03006BT1, T2 AXI03007, etc. Only NOT for scx10 iii Ford Bronco AXI03014.. High-quality MaterialThe RC Upgrades Parts of High quality of Brass,Highly Increase the strength and precision.increase the long-lasting durability.. High precisionAluminum Portal Axles of High quality of aluminum,precision CNC machined,lightweight and durable.. Long-lasting Performance Specially designed strengthening cut-outs for increased crash resistance.The upgrades part is durable enough,improves the overall performance of the rc car.. Easy to InstallIncrease overall performance and durability of your RC car.Easy to install, great for replace the old or broken part..

Fit for SCX10 110 RC Crawler. Machined from aluminum and anodized for good looks. Metal internal gears and driveshafts. Heavy duty steering linkage set for added durability. Length from hex to hex 180mmOverall length 213mm.

Fit For SCX10 II 90027 90028 90046 90047 110 RC Rock Crawler. High pinion gears for added ground clearance better driveshaft angles. Larger load bearings used around the gear set to reduce flex and create a stronger drive-train. Aluminium Alloy Housing ,Steering RodSteel internal gears and driveshaft, durable in use. Complete Alloy Front Rear Axle Assembly Parts Upgraded.

This CHEAT CODE version is specially designed for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Comes with modified wheel distance, 5mm shorter at front than normal version, make it easier to pass some narrower places to win points The thickened CVD brings better strength to overcome larger load and tough terrains. Made of high quality aluminum alloy, equipped with brass front knuckle, aluminum rear knuckle, 40CR 6mm output shaftthicker than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. US patented Patent No. US D1,053,707 S Isokinetic 3-section CVD ensures that there are no jerks when turning at large angles, 52 max. steering angle, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. The kit comes with front and rear axles, front axle is equipped with smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structure allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-drilled hole on front axle for thrust rod installation for better stability..

Fit for SCX10 110 RC Crawler. Machined from aluminum and anodized for good looks. Metal internal gears and driveshafts. Heavy duty steering linkage set for added durability. Length from hex to hex 180mmOverall length 213mm.

Fit for SCX10 110 RC Crawler. Machined from aluminum and anodized for good looks. Metal internal gears and driveshafts. Heavy duty steering linkage set for added durability. Length from hex to hex 180mmOverall length 213mm.

Robust One-Piece CNC Machined Aluminum HousingCrafted from high-quality aluminum with precision CNC machining, this axle set delivers outstanding strength and durability. The one-piece construction and anodized black or silver finish provide both corrosion resistance and a premium scale appearance, ideal for demanding RC rock crawling conditions.. Integrated SOA CMS Servo Mount OptionsComes equipped with an aluminum Servo-on-Axle SOA mount and dual servo linkslong for Chassis Mounted Servo CMS and short for SOA setupoffering flexible steering configurations to suit various performance or scale setups. This versatility ensures better servo positioning and improved steering response.. High-Clearance Suspension GeometryFeatures built-in upper link mounts on the differential cover and increased upper link clearance for maximum suspension up-travel, which enhances articulation and performance over technical terrain. The double shear shock mounts further improve durability and load handling.. Fully Assembled with Hardened Steel InternalsThe axle includes a fully machined AR44-style gear set 308 ratio, heat-treated steel VDI universal shafts, and sealed bearings, all pre-installed. This all-inclusive package ensures a smooth, reliable drivetrain thats ready for high-torque rock crawling out of the box.. Scale Accuracy with Performance EnhancementsDesigned with integrated panhard and link mounts and bearing retainer caps at the rear eliminating the need for external lockouts, the axles offer a cleaner, more realistic scale look. The 184mm pin-to-pin and 190mm hex-to-hex dimensions provide perfect fitment for SCX10 II, VS4-10, and similar 110 scale crawlers..

Fits ForAluminum Front Rear Axles Upgrades Part for 110 SCX10 SCX10 II 90046 90047.. High-quality MaterialAluminum Axles of High quality of aluminum,precision CNC machined,lightweight and durable,increase the long-lasting durability.. Long-lasting Performance Specially designed strengthening cut-outs for increased crash resistance.The upgrades part is durable enough,improves the overall performance of the rc car.. Easy to InstallIncrease overall performance and durability of your RC car.Easy to install, great for replace the old or broken part.. More DurableThe upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance..

Fits For RC Upgrades Part Front Rear Axle for 110 SCX10 SCX10 II 90046 90047 RC Crawler Car.. Made of High-quality MaterialAluminum alloy structure, built to withstand hard driving, collision and abuse. Strict strength and rigidity provide unparalleled durability.. Long-lasting PerformanceThe RC Hops Up is durable enough,Superb Craftsmanship, lightweight and durable,Made your RC Crawler More Attractive and Cooler.. Easy to InstallEasy to install, great for replace the old or broken part.Increase overall performance and durability of your RC car.. Special noteIn the position of various screw holes, screw glue is applied, so that the screws are not easily separated from the upgrade accessories..

Fits For RC Axle Complete Metal Front Rear Axle Upgrades Part for 110 SCX10 SCX10 II 90046 90047,RC Crawler Car.. High-quality MaterialHardened steel gears and drive shaft,High Quality Aluminium Alloy Material.. Long-lasting Performance The upgrades part is durable enough,Superb Craftsmanship, Made your RC Crawler More Attractive and Cooler.. Easy to Assemble The upgrades part set is easy to replace original parts, highly increase the strength and precision.. Upgrades partExcellent upgrades part, better experience the fun of RC car,making your RC car more exquisite and beautiful..

Offset Pumpkin Design The offset front differential boosts ground clearance while keeping a true scale look. These HD44 axles blend realism with high performance. CNC Aluminum Housing The HD44 Axles use CNC aluminum one-piece housings for high strength and precision. Front weighs 253g, rear 153g, offering durability and a realistic scale look. Steel Gears Shafts Each HD44 axle features hardened steel gears and VDI shafts for smooth power, wear resistance, and stable torqueperfect for serious RC crawling. Precision Structural Design Integrated C-hubs, double shock mounts, and panhardlink brackets give the Vanquish HD44 axle set better articulation, steering, and fitment accuracy. Upgrade for VS4-10 SCX10 II Perfect fit for Vanquish VS4-10 and Axial SCX10 II. The Vanquish HD44 axle set enhances durability, handling, and overall crawling control.

RC Crawler 110SCX10 II upgrades, brass diff cover for SCX10 II specially. SCX10 II Brass Axle HousingMade of brass, weight of 74g2.61oz, only makes the differential cover more robust and durable, but also provide additional weights to the axles. SCX10 II Brass UpgradesProfessional SCX10 II brass diff cover, metal upgrades, replacement for plastic stocks, specially designed and crafted for 110 RC crawler enthusiasts bored with plastic ones. Excellent WorkmanshipCNC machining ensures precise dimensions of SCX II diff cover, perfectly replacing the stocks. Including the hardware, all fit well. Anti-corrosionThe black electrophoretic coating not only provides rust and corrosion resistance, enhancing the lifespan of the axle housing, but also gives a premium look.

Premium SCX24 upgrades for 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. Made of aluminum alloy and brass, anodized surface, front axle 85g3oz, rear axle 35g1.2oz.. US patented Patent No. US D1,052,393 S lsokinetic 3-section CVD ensures that there is no jerks when turning at large angles, 52 max. steering angle.. Front and rear equipped with customized 2-14T gears, by replacingm the gears of rear axle to 2-16T gears, you can get 14 underdrive.. Support high torque adjustable servo mount, adjustable height rear axle structure with upper link mount, diamond-cut diff cover..

Assembled set. Straight Front Rear Axle Set with Metal Forward Reverse Bevel Gear for 110 RC Crawler SCX10 II 90046 47 R-G-T 86100.. Steel internal gears and driveshaft.. Weightforward axles set about 286g. Weightreverse axles set about 278g.. Lightweight upgrade instantly enhances overall performance in handling and durability.. Reverse axle works with reverse transmission, reduce shaft-induced effect..

Compatibility The Vanquish F10 Axles for 110 RC Crawler Vanquish VS4-10 Phoenix F10 LCG Chassis DIY Upgrade Parts. Vanquish F10 Axles Material Aluminum alloy axle housing, steering rods, adapters stainless steel driveshafts hard steel gears using laser cutting and CNC machining. Vanquish F10 Axles Structure Portal gear set 28T20T bevel gear set 30T8T total gear ratio 7.191 stainless steel driveshaft maximum steering angle of up to 45 degrees high caster reinforced C-hub. Vanquish F10 Axles Specifications Weight 320g front axle, 237g rear axle output shaft diameter 5mm standard hex 12mm hex thickness 5.6mm. Vanquish F10 Axles Design One-piece molded bearing retainer adjustable lower shock mounting position S8E offset pivot ball two upper link mount tuning positions.

Compatible with VS4-10 Chassis Upgrades These aluminum CNC F10 front and rear axles are suitable for 110 RC Crawler VS4-10 Axial SCX10 II chassis upgrades. High-Quality F10 Portal Axles The F10 portal axles are crafted from precision-engineered CNC aluminum alloy. Our gears are made of fully machined steel for durability. One-Piece Molded The F10 portal axles feature one-piece molded bearing retainers for an unmatched scale look, ensuring durable and smooth drive, helping you easily cross any terrain. Specifications of the F10 Portal Axles Parachute tooth 8T30T Door reduction gear 20T28T Axle tooth ratio 7.191 Steering angle about 45 Output shaft 5mm Input shaft 5mm Connector size 12mm Binder thickness 5.6mm Net weight front axle 320g, rear axle 237g. What You Get 1 set of Vanquish F10 Portal Axles front and rear, a worry-free 12-month warranty, and access to friendly customer service.

Made of high quality nylon and fiber material via high precision mold injection, exquisite frosted surface, comes with metal gears and bearings. Thickened 3-section ISO CVD, max. 52 steering angle, 6mm thickened output shaft. Featuring SOAServo On Axle and BTABehind The Axle servo mounting options, allowing non-destructive transition from one to the other according to your need. Front axle is equipped with 70 grams metal counterweight for heavier front of your crawler for better performance. Two wheel distances available 1 AR44AR45 wheel distance194mm from hex to hex 2 Capra wheel distance224mm from hex to hex.

Made of high quality nylon and fiber material via high precision mold injection, exquisite frosted surface, comes with metal gears and bearings. Thickened 3-section ISO CVD, max. 52 steering angle, 6mm thickened output shaft. Featuring SOAServo On Axle and BTABehind The Axle servo mounting options, allowing non-destructive transition from one to the other according to your need. Front axle is equipped with 70 grams metal counterweight for heavier front of your crawler for better performance. Two wheel distances available 1 AR44AR45 wheel distance194mm from hex to hex 2 Capra wheel distance224mm from hex to hex.

This portal axles are formed from high-quality nylon and fiber materials by high-precision mold injection molding, surface frosting texture treatment,comes with metal gears and bearings.. The front axle adopts large-scale c-knuckle design and the rear axle is an integrated structure. At the same time, the caster angle of the front axle is 18.5 degrees and the kingpin inclination angle is 7.5 degrees.This is a perfect angle, which can effectively improve the stability of the vehicle when climbing.. The ground clearance is increased by 12mm, effectively improving the trafficability and stability.. Equipped with servo mount and rear link mount, a link is specially equipped for the structure of servo on the beam. It is a great select for Axial SCX10 SCX10 II 110 RC Crawler..

Premium upgrade for 110 RC crawler e.g. SCX10 Capra D90 etc., please be noted that these driveshafts won't fit with TRX4 stock transmission.. It is made of high-quality hardened steel, anodized surface, solid, and long-lasting.. Compared to normal driveshafts, MEUS driveshafts feature an E-shape buckle that effectively prevents joint separation and ensures flexibility.. U-shape Universal joint style, awesome and realistic.

Nylon injection molding shell, internal steel gear and drive shaft, sturdy and durable.. The gear can increase the ground clearance and improve the angle of the drive shaft.. Use larger load bearings around the gear set to reduce bending and produce a powerful drivetrain.. The front and rear axle are specially designed for 110 axial SCX10 I and SCX10 II RC car.. Equipped with 2pcs metal drive shaft, easy to install. Strict quality control standards, good stability and excellent performance..

Axial AR45 Universal Axle Set 2 SCX10 III, AXI232061.

CompatibilityThis portal axle kit fit for RC crawler 110 with 313mm wheelbase,such as Axial SCX10,TRX4,D90,etc. AccessoriesEquiped with Injection Molded Nylon Axle Housing,this chassis kit will make your 110 crawler body more durable. TransmissionThe RC car chassis frame has been used 2-Speed highlow range transmission with high-torque 35T 550 motor,which will provide ample power to your 110 RC drift cars. Sturdy BodyWeighing 895g1.97b of the metal frame chaissis,RC car body will give a lower center of gravity,leading to a better stability and crawler performance. Enjoy YourselfYou can also assemble this RC chassis as your pleases.Please enjoy the fun of DIY.

Aluminum Front Rear AxleRC Axles CNC Metal RC Axles Complete Set for 110 RC Crawler Axial SCX10 II RGT 86100 Redcat GEN8 Element Enduro CC01.. CNC Front Rear AxleThis 110 crawler Front Rear Axle is made of 6061 aluminum shell, CNC machining, tailor-made for DIY enthusiasts Integrated C-Hub design, integrated Panhard mount, upper link mount built into the differential cover. Upper Link Mounts Built into Differential Cover.. High Quality Matetial Made of Aluminum alloy CNC processing RC front and rear axle kit with anodized and hardened surface, steel spiral gear, excellent quality. Novel appearance and exquisite workmanship, Servo structure on the axle steering force is more stable.. Large Steering Integrated AxleThis high simulation appearance front and rear set with slope axle egg, excellent trafficability. The upgrades RC front axle comes with 46 Large Steering, 8 inclination, Steel internal gears and driveshaft,gear ratio8T24T, 8T27T, 8T30T, 8T33T.. 100 Quality Guarantee Servicesinbox 1pcs Front AxleContains servoSOA mount, 1pcs Rear Axle. AMK offered 100 customers satisfaction warranty, please feel free to get in touch with us if you have any question on our products, our team willing to help you to solve the problems that you have meets..

Made of high quality 45 Steel for greater hardness and durability.. Replace the CVDs and gears of the original SCX10 nylon portal axles to ensure better performance and longer service life.. CVD shafts can provide smoother movement and max. 45 angle for effective drivetrain with great performance..

Exquisite workmanship Precision machining CNC processing, durable and high polishing performance, elegant and delicate, shiny and not easy to fade. Easy to install Easy and convenient for installation, reliable and durable to use. Mainly used to better control your vehicle, practical accessory.. Compatible with Front CVD universal drive shaft, fit for Axial SCX10 II 90046 90047 RC Car.. Perfect upgrade accessories Wonderful replacement for old or broken, directly installed.. Warranty If you are not satisfied with our received product, you can request unconditional return and refund within 180 days. As for any problem of this product, you can email us at any time. We will reply to you as soon as possible..

Housing is Aluminum Alloy,internal diff gear is Harden 45 steel,CVD Driveshaft is Steel alloy. Adjustable Caster,machined from aluminum and anodized. Length from hex to hex 180mm,Overall length 214mm. The RC axle is suitable for 110 Axial SCX10 II AX90046 90047 90027 90028 RC Crawler Car. Made by WEFEINO all WEFEINO upgrade parts are direct replacements for stock components additional parts are not required.

Color Titanium. Machined from aluminum and anodized for good looks.. Suitable for 110 Axial SCX10 RC Model Crawler Car.. Heavy duty steering linkage set for added durability.. Lightweight upgrade instantly enhances overall performance in handling and durability..

Inprove RC Car's Performance It helps improve the overall performance of the remote control car, making your car more attractive and cool.. Stainless Steel The RC drive shaft is made of quality stainless steel material, it is in high hardness and also to use.. Keep Smoothly Drive Front rear axle drive shaft is available for AXIAL SCX10 II 90046 90047 110, ensuring driving smoothly.. Sturdy to Use RC drive shaft axle is easy to install, flexible, sturdy, has a long service life, and smooth surfaces can delay wear.. Replacement Part The RC drive shaft can be a good replacement for old or broken accessories, keeping your RC model stable performance.

COMPATIBLE FOR SCX24 AXLESThe Original Straight Steering Axles are suitable for 124 SCX24 AX24 Deadbolt JLU C10 Bronco Gladiator Axial 124 RC Crawler. Ideal plastic assembled portal axle replacement for AXI31609.. EXCELLENT FRONT REAR AXLES SETThis RC axles are assembled and lightweight, ideal replacement for old or damaged stock scx24 axles. Easy and convenient to install.. HIGH QUALITY MATERIALFront axle 20.8grams, rear axle 15.0grams, the axle housing is made of plastic material, which is light weight and provides better flexibility while conquering tough terrains.. BEST CHOICE OF YOUR AXIAL 124 CRAWLEROur Axles equipped with 16T worm gear set. Please note our SCX24 is totally same as stock axles, not upgraded.. GREAT SERVICE FOR YOUWe put a lot of effort into manufacturing quality products to meet our customers expectations. We stand behind every RC vehicle parts that we make, if you run into any trouble with our item, contact us please, we will service you 24 hours a day until you are satisfied..

100brand new and high quality. Application 110 Rc Rock Crawler Car AXIAL SCX10. MaterialHigh quality alloy metal. ColorGrayRed.

Complete parts set lets you build either a complete front axle or a complete rear axle. High pinion design provides added ground clearance and better drivershaft angles. Small pumpkin for increased clearance and a scale look, while optimized 3.75 gear ratio reduces torque twist. Single piece axle housing for added strength, 1-piece all-metal locker, and bolt on link mounts. Allows up to 45 degrees of steering and provides smooth action for a higher performing, more efficient drivetrain.

Create your own custom radio control scaler, starting with proven performance of the SCX10 II chassis. Features AX10 transmission, AR44 single pieces axles, chassis mounted servo, and all aluminum suspension links. Top it off with electronics and your choice of body, tires, and wheels all sold separately for a custom rig. Includes Axial SCX10 II Raw Builders Chassis Kit. Requires Radio System 2-3 Channel, Steering Servo, Motor, ESC, 6C NiMH or 2S LiPo Battery, Charger, Tires, Wheels, Body, Charging Bag and Track Equipment.

Scale-looking AR45 standard solid axles come complete with ball bearings and metal gears for durability. AR45 universal joint axles provide up to 45 degrees of steering plus smoother action for a higher performing efficient drivetrain. All links are metal and all pivot points are on stainless steel balls for long-lasting performance. Includes transmission gears 20T34T for use with the standard axle gear ratio. Kit is designed for a 12.3 313mm wheelbase but supports all wheelbases, including 12 305mm, 11.4 290mm and 13.9 353mm. Adjustments to rear links may be required.

The Front and Rear Portal Axles fits for 110 RC Crawler Car Axial SCX10 III AXI03007 AR45. CNC Machined Billet Aluminum Housing Smooth Anodized Coating Compact yet durable design Hardened Steel Gears Hardened Steel Construction Driveshafts Full Ball Bearings Stainless Steel Steering and Servo Links Updated Differential for New Look Up to 45 degrees of steering. Portal Axles provide higher ground clearance and reduce the torque on other drivetrain components for improved performance.. Total Width 220mm Pin to Pin Width 186mm Pumpkin Height 32mm 12mm Standard Hex Hex Width 6mm. Bevel Gear Set 24T8T Portal Gear Set 23T12T Total Gear Ratio5.751.

Compatible with Axial SCX10 2 AR44 AX90066 Deadbolt,AX90059 Trail Honcho,AXI90075, AXI03001T1,AXI03001T2 ect.. High-End Processing Full CNC billet machined, not casting, which will increase the axles strength dramatically, more durable.. High Quality Material Aluminum 7075, reinforced aluminum. Enlarged Bearings to enhance the operation performance and make it more durable.. Easy Installation directly replace the plastic front axle. C hubs are machined in One-Piece with the axle..

Compatible with Axial SCX10 2 AR44 AX90066 Deadbolt,AX90059 Trail Honcho,AXI90075, AXI03001T1,AXI03001T2 ect.. High-End Processing Full CNC billet machined, not casting, which will increase the axles strength dramatically, more durable.. High Quality Material Aluminum 7075, reinforced aluminum. Enlarged Bearings to enhance the operation performance and make it more durable.. Easy Installation directly replace the plastic rear axle. Rear hubs are machined in One-Piece with the axle..

High quality of aluminum 7075. Black oxidation surface treatment. Designed for long-lasting performance.