designed to connect a 12 Gbps host bus adapter or RAID controller with SFF-8643 to 4 discrete SATA drives Mini SAS HD to SATA adapter cable provides reliable internal connectivity between a high density RAID controller card and direct attached storage devices with a SATA plug.. 36 pin SFF 8643 connector and 4 x 7 pin SATA connectors provides both 3 Gbps and 6 Gbps compatibility while migrating to a to 12 Gbps storage area network system. HD mini SAS breakout cable designed with acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration.. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. A lifetime warranty is included with this Mini-SAS cable for peace of mind when purchasing..

6Gbps With data transfer rates of up to 6 Gbps for SATA 3.1, you can expect fast and efficient file transfers. The USB C adapter is backward compatible with USB 3.02.01.1 for added convenience, 5Gbps transfering rate for IDE hard drive disk.. Wide Compatibility Our SATA adapter supports a wide range of storage devices, including 2.53.5 SATA HDDs and SSDs, 2.53.5 IDE HDDs, as well as DVD-ROM, CD-ROM, CD-RW, DVD-RW, and DVD-RW optical drives. It features a dual-head IDE connector 40-pin and 44-pin, along with a SATA II connector, allowing you to connect and operate TWO drives SATA and one IDE simultaneously. NOTE Can not read the two IDE at same time.. Stable Power Provided To ensure stable power supply, we provide a 12V 2A power cable. Additionally, the 4PIN Power Cable is specifically designed for 3.5 IDE drives.NOTE The included 4Pin power cable is only required for 3.5'' IDE HDDs, no need to plug it in a 3.5'' SATA HDD even it comes with 4 big power pins.. Human-Friendly Design Our SATAIDE adapter is plug and play, allowing for easy installation and use. It also supports hot swapping, enabling you to connect or disconnect drives without the need for restarting your computer. The adapter includes an onoff switch for HDD protection, and the LED light indicates power and activity status.. Package 1 X SATAIDE Adapter, 1X USB C Cable, 1 X 12V2A Power Adapter, 1 X 4Pin Power Cable. We take pride in offering top-notch customer support. If you have any questions or concerns, our dedicated customer email support team is available 247 to assist you..

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector. Leverage hardware raid performance with this SATA multi-lane cable Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters Supports up to 6Gbs data transfer rate per drive. DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management Slim ribbon cables minimize airflow impact in a computer case. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

Supported HDDSSDFIDECO IDE and SATA adapter is compatible with 2.53.5 SATAIDE hard drives. It can support the connection of 3 hard drives simultaneously one 2.5 IDE, one 3.5 IDE, one 2.53.5 SATA.. Compatible SystemFIDECO hard drive reader is widely compatible with Windows, Mac OS, and Linux. Just plug and play No driver or software is needed. Maximum 5Gbps Super SpeedFIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. It can be also backward compatible with USB 2.01.1. Data transfer has never been so much easier and faster.. Easy Set-upSimply insert your hard drive, connect the power adapter and USB cable, and then turn on the device by pressing the power switch. Note For 3.5 IDE HDD, you need to connect the 4-pin power cable.. Warm NoteFor new hard drive, please go to Disk Management to initialize it first, and then your hard drive can be recognized. If 2.5 and 3.5 IDE hard drives are connected simultaneously, you need to set jumper. The default master is 2.5 IDE hard drive, so you need to set jumper for 3.5 IDE hard drive and set it to slave..

QUICKLY ACCESS TO SATA SSDHDD USB to SATA adapter allows you to connect any standard 2.5 or 3.5 SATA HDDSSD to your computerlaptop via USB 3.0 port. It is ideal for you to backup files or upgrade your notebookPC hard drive, Supports a drive's capacity of up to 6TB. SUPERSPEED UP TO 5Gbps with USAP External SATA adapter supports data transfer up to 5 Gbps. SAVE TIME WITH UASP This SATA to USB adapter supports UASP Technology, which is 70 Faster than traditional USB 3.0 and 80 reduction in required processor resources, Backward compatible with USB 2.0 1.1. PLAYPALY SIMPLE RECOGNIZED The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure. Its plug-and-play and doesnt require drivers. Warm Tip Windows can only recognize and assign a drive letter to drives that are formatted in a compatible way. If this is a new drive, you need to formatting. WIDE COMPATIBILITY This hard drive to USB adapter SATA to USB cable SATA 715 12pinis compatible with PS4, Xbox, Windows 108.187VistaXP, Mac OS. hot-swapping, plug and play. The hard drive USB adapter is a portable solution that tucks away nicely in a laptop bag. INCLUDED 12V 2A POWER ADAPTER This 2.5 3.5 hard drive adapter is equipped with a 12v 2A power supply, You need the power supply to use the adapter with a full-size spinning drive because USB simply doesn't provide enough power to run a 3.5 drive. But for a laptop 2.5 drives or SSDs, you don't need the power.

FM. SATA adapter. Serial ATA 150300600. Slimline SATA F to SATA combo M. red.

One Male SATA 715pin port, one 2.5Female PATA port 44-pin IDE converter Adapter. Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD.. Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. This SATA to IDE Adapter,No driver needed, plug and play. Package Contents Sata to Pata Interface Adapter1PCS.

Converter6 Pin ATX PSU to SATA Power Supply Cable can convert 12V 6 Pin ATX power supply to 5V SATA to charge the Hard Drive. ConnectorsConnector 1 6 Pin ATX PSU Female, connector 6-pin GPU cable. Connector 2 SATA IDE Female, connector Hard Drives. Step-down Voltage RegulatorATX 6 Pin Female to SATA Female Power Supply Cable design with a step-down voltage regulator conversion board, convert 12V to 5V. Moreover, there are heat dissipation holes on the casing, which can make the cable performance more stable. NoteWhen connecting, please note Your 6-pin GPU cable must be one-to-one. If your 6-pin GPU cable is a splitter cable and you want to connect one end to the GPU and the other end to our product to power Hard Drives, it will not work. High QualityUse high-quality wire, strong toughness and wear resistance. The interface is designed according to the standard, and it is easy to plug and unplug.

Connect a 2.5in SATA hard drive to your computer using a portable cable with UASP Support. USB 3.1 TO SSD or SSD TO USB 3.1 means the same thing and has the same functionality. This is an adapter that enables customers to connect their hard drives to a PC via USB 3.1 and it can be viewed as connecting the USB TO THE SSD or THE SSD to the USB. It is the same exact function.. USB 3.1 high-speed supports up to 10Gbps data rate. Hot-swappable, Tool-free HDD Installation, plug and play, no drivers needed.. LED light indicates Power and Activity status.. Comes with USB-C Adapter..

1 This adapter has built-in chip, Can convert SAS disk to the SATA interface of the common motherboard, so SATA computers can also use the SAS disk and no need any SAS raid card.. 2 if your SATA interface without SAS function, Connect our adapter, it can directly readwrite SAS hard disk, support win7, win10, win11, lunix operating system.. 3 It is not recommended to connect the USB disk enclosure or cable, The USB master chipset is not adapted, incompatibility may occur.. 4 After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing.. 5 Supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported..

22 Pin SATA PowerData Adapter Cable 22 Pin 715 SATA female to 4-pin IDESATA III 7-pin female data and power combination extension cable, supporting both power supply and high-speed data transmission simultaneously,eliminating the need for separate SATA data or power cables.. SATA 6Gbps High-speed Transfer SATA III data cables provide fast and reliable data transfer, supporting high-speed data transfer rates of up to 6 Gbps, twice the speed of SATA II, and are backward compatible with SATA I and SATA II.. Convenient Cable Routing SATA 22 Pin 157pin to 4 pin IDESATA 7 pin 2-in-1 data power cable, 0.5 m19.69 inches long, flexible and easy to route,plug and play,for efficient installation and neat layout in compact computer cases.. Durable and Stable This SATA 157 pin female power data cable is made of PVC material with an outer braided mesh design for increased durability. The metal clamp ensures a secure interface connection, guaranteeing stable data transmission.. Multi-device CompatibilityIDE 4 pin to SATA 157 pin data cable requires no driver installation and is widely compatible with SATA-interface mechanical hard drives, optical drives, burners, SSDs, PCI cards, and other devices..

Unique design allows any 2.53.5in IDE hard drive to be used and inserted upright into a SATA HDD docking station or duplicator drive bay. Backed by a StarTech 2-year warranty and free lifetime technical support. Supports 40-pin 3.5in and 44-pin 2.5in IDE hard drives. Durable, metal construction. Compatible with most 3.5in StarTech SATA hard drive docking stations and duplicators. Compatible with PATA IDE 66100133 MBps hard drives. Compliant with SATA revision 1.0. Large capacity hard drive support, with 48-bit LBA.

It connects 6 SATA3.0 SSDs or HDDs to your desktop computer to improve your system performance and expand overall internal storage No-Support Raid. Based on the ASMedia ASM1166 chip, more stable and wider compatible. No additional software installation or setting requiredPlug and Play. NOT support hot swapping. Support a port Multiplier that is not in a RAID configuration. Compatible with SATA hard drives Solid state drives and computer systems with SATA controllers. Supports Windows 7810, Windows Server 2008 R22012 R220162019, RHELCentOS 678, Debian 91011, Ubuntu 16182021, SUES 111215, FreeBSD 111213, VMware ESXi 567. What's in the Package M.2 to SATA3.0 Adapter Card 1, Phillips screwdriver 1, PCIE to M.2 nickel-plated pan head screw 1.

SATA COMPATIBILITY This drive adapter is compatible with SATA SSD M.2 drives only B and BM key M.2 SSDs in 2230224222602280 form factors Supports SATA I, II, and III up to 6 Gbps TRIM, and SMART. COMPATIBILITY NOTE PCIe M.2 drives M-key, or BM key are NOT supported whether using NVMe or AHCI Please refer to your drive specs before purchasing This product only supports M.2 SATA drives. HIGH PERFORMANCE Build a high-performance storage setup by installing up to two M.2 SATA SSDs in a 2.5 SATA adapter with RAID support JBOD, SPAN, RAID 0, RAID 1 Important JBOD requires a SATA portcontroller that supports Port Multiplier. HASSLE-FREE SETUP Open-frame steel mounting bracket with 2.5 SATA form factor fits in any 2.5 SATA bay that supports 7mm tall 2.5 drives Easy to install with all necessary hardware incl. M.2 drives and screwdriver not incl.. TRIM SUPPORT TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support TRIM is supported in JBOD and RAID 1, SMART is only supported in JBOD.

NOTE NOT compatible with M.2 NVMe or AHCI PCI-Express SSDs Support only M.2 SATA. BOOST SYSTEM PERFORMANCE Increase system performance by adding the speed of an M2 SSD in any 2.5 SATA application with the M2 SSD to 2.5in SATA Adapter Open design maximizes heat dissipation to protect the health of your drive. BROAD COMPATIBILITY The M2 to SATA converter supports full length M2 SDD solid state drives and can mount multiple drive heights including 2230, 2242, 2260, and 2280 NOTE Not compatible with M.2 NVMe or AHCI PCI-Express SSDs. INCREASED TRANSFER SPEEDS Utilize the full potential of your SATA III controller with an M2 SSD, reducing your data transfer bottleneck with file transfer speeds up to 6Gbps Operating Temperature -40F to 185F Supports B KeyM plusB Key M2 SATA SSDs.

Purpose 2 Pack SATA 22Pin Male to Female adapter, Use to protect your original port of 2.5 HDD, 2.5 SSD, 3.5 HDD from damage. Tips Please note this is a SATA male to SATA female extender, NOT SAS to SATA Adapter SATA 22-pin which is 15-pin for power and 7-pin for data transfer. Kindly Reminder Compatible with 2.53.5 HDD some of the 1.8 SSD, CD DVDBlu-ray drives. Durable SATA 22 Pin Adapter PVC Molded, Gold plated SATA copper pin contact, please supply power when you use a hard disk. SATA 13Pin to 2.5 inch SATA adapter which allows users to operate any 13pin Laptop CDDVD-ROM in any standard SATA host controller.. What You Get SATA 22 Pin Male to Female Adapter. You can let us know if you have any questions, and we will answer them within 24 hours.

Supports 40Pin IDE PATA to SATA conversion, compatible with 2.5-inch3.5-inch legacy hard disk drives HDDs and internal optical drives CDDVD drives. It can easily connect to SATA interface devices such as new computers, breaking the interface barrier between old and new devices.. No additional drivers need to be installed the system automatically recognizes the adapter after connection. No professional technical operation is required, allowing even novice users to get started quickly and simplifying the process of data migration or reuse of old devices.. Supports a maximum transfer speed of 480Mbps, enabling efficient completion of large file copying, data backup and other operations. It avoids time waste caused by slow transmission and ensures the efficiency of data transfer.. Equipped with a 12cm-long MOLEX 4Pin power cable, it meets the stable power supply needs of the device. The cable length is suitable for different installation positions inside the chassis, avoiding messy wires and adapting to common usage scenarios such as desktop computers.. Specifically designed for old IDE interface devices, it helps users activate idle legacy hard drives and optical drives. It enables data coexistence between old and new computers, as well as re-enabling old optical drives to read discs, fully tapping the residual value of old devices..

Convert any SATA drive into 40-pin IDE interface just like a standard IDEATAPI drive. Ideal for computers or embedded systems that are not equipped with SATA controllers.. Supports any type of SATA III, SATA II and SATA I Devices such as Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk, etc.. Complete hardware solution no driver installation is required. Compatible with any OS such as Windows, DOS, Mac, Linux, etc. that support IDEATAPI storage devices. Mini vertical board with size only 3 L x 0.9 W and mount directly to the back of SATA drive.. Fully RoHS compliant. Made in Taiwan..

QUICKLY ACCESS A SATA SSD OR HDD Add drive space to your laptop by connecting to a SATA 2.5 SATA SSD or HDD using this SATA to USB cable. You can connect to an external drive t0 add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop.. CONNECT FROM ANYWHERE The hard drive USB adapter is a portable solution that tucks away nicely in a laptop bag with no external power required.. SAVE TIME The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure. Its plug-and-play and doesnt require drivers.. 3.5 HDD is not supported Not working with a 3.5 HDD. IT ONLY WORKS with 2.5 inch SSD or HDD..

Convert one of your extra 4-pin Molex power connectors into a SATA power connector. - Good for all SATA harddisk 2.5 and 3.5. - Compatible SATA CD Drives. CHARGING CORD FOR SAMSUNG GALAXY S2 S3 S4 NOTE 2 4 LG HTC..

1 It has 9 SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.. 2 NVMe to 9 SATA Adapter is designed for less SATA Ports but more spare M.2 NVMe Slots on Motherboard, This M.2 SATA Adapter will help you expand 9x regular SATA ports for storage appliances that use many SSDs andor 3.5 hard drives. 3 Base on High Speed chip, more stable and wider compatible. Not support hot swaping. No additional software installation or setting required,The advanced Heatsink on Chipset will help the chipset working in lower temperature, avoid having any issues with reliability due to overheating.. 4 NVME 9 SATA Adapter adopts dual-channel PCIe Gen3Gen4 interface M.2 M-Key 4x, SATA Ports Upload total of 16Gbps transmission bandwidth, Download Each of which supports 6Gbps.. 5 Fully compatible with SATA interface mechanical hard drivesSSD solid state hard drivesoptical drives, etc. Support Windows 7810, Windows Server 2008 R22012 R220162019 Mac OS Linux FreeNAS and various NAS operating systems..

The item included one PCBA and Case Work for M-key NVME SSDNot work for BM-key SATA SSD Compatible with 2280 2260 2242 2230 size NVME M.2 SSD The SSD is not included.. JMS583 Chipset inside The JMS583 chipset is a USB Universal Serial Bus bridge that combines a USB device with both a PCI Express PCIe controller Via the PEDET interface of M.2 mechanical, the JMS583 can auto switch USB-to-PCIe mode, Not work for USB-to-SATA mode.. In USB-to-PCIe mode, It supports PCIe Gen3 x2. For PCIe, it provides up to 16Gbps bandwidth. It has full backward compatibility for PCIe Gen2Gen1 and link width 1 lanes. The PCIe host supports NVM Express, which is an interface that allows a host driver to communicate with an NVMe SSD Solid-State Disk. The NVMe driver is embedded in customized RAMRomSPI Flash.. USB 3.0 to M.2NGFF NVME Storage adapter, providing one USB 3.0 connector on the host connection and one 67pin M.2 connector on the SSD storage devices connections It supports a dynamically switching power state with NVMeUSB power management for power saving mode. It has an algorithm that can balance power consumption and performance.. Supports USB 3.1 GEN2 10Gbps Super Speed Plus. It is compatible with USB 3.1 GEN1 5Gbps Super Speed, USB 480Mbps High Speed, and Full Speed. It can work normally with auxiliary power. The Mass Storage transaction supports both Bulk Only Transfer BOT and USB Attached SCSI Protocol UASP. For USB, it provides up to 10Gbps bandwidth..

SATA 3.0 mSATA to SATA Expansion Card Can be used as a system drive compatible with SSDs and optical drives plug-and-play.. mSATA Interface Using an adapter card, this expansion card enables mini-ITX motherboards in industrial control computers, security devices, all-in-one PCs, gaming consoles, and other systems to expand their SATA interfaces.. Dual-sided PCB board Made with high-quality PCB material, it is heat-resistant, cold-resistant, and maintains its shape even after prolonged use, ensuring reliable data operation even in harsh environments.. Thickened gold-plated contacts Utilizing thickened gold-plating technology, these contacts offer scratch resistance and durability, ensuring safer connections and stable data transmission.. Supported systems Linux Windows 7 Windows 10 MAC.

This 22Pin male to 29Pin female data cable is suitable for SFF-8482 hard drive host connection, compatible with Dell and other brands of computers.. The cable length of the data cable is 8cm, which is suitable for short-distance connection, reducing signal attenuation and ensuring the stability and speed of data transmission.. How to use 1. Separate the data and power of the SATA hard drive interface, connect the motherboard SATA interface and power cable, and connect directly. Before using the SATA motherboard, some motherboards must set the BIOS to AHCI mode optional RAID mode for RAID 2. Separate the data and power of the SAS hard drive interface, connect the motherboard SAS interface SFF-8482 and the power cable, and connect directly.. The SATA motherboard connected to the SAS hard drive must meet one of the following conditions, otherwise it cannot be used 1. First of all, the motherboard supports SAS. 2. Or you have an external SAS card. 3. Or your SAS hard drive supports SATA mode.. Note When using this product, do not plug or unplug with power on to avoid damage to the device..

allowed to read or write SFF-8482 29Pin SAS HDD in SATA port of cheaper normal motherboard or External USB SATA. Sintech SAS to SATA Card convert SAS as normal SATA,it can be read in USB SATA cable,but we can't sure all USB SATA can work ,we recommend to use it in normal motherboard SATA port.. NOTICE1Some old motherboard need to upgrade montherboard first then can work with this card.. NOTICE2There is 3 types of SAS HDD sector512520528 ,Sintech card only support SAS HDD with sector type 512.. NOTICE3 Because SAS HDD was used in Server,there is a lot of encryption and protection detection,recognition will be 10-20 seconds slower than regular SATA HDD after powered on..

Work for Laptop 2.5 Hard Disk Drive. Works with all IDE 44Pin Drives up to 500GB Supports IDE 66100133MBs. Be good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable.. Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux.. Dimensions 2.72 x 0.55 x 0.69 L 69mm x D 14mm x H 17mm . 2.5 inch IDE 44Pin SSD or HDD Drive to SATA Female Converter Board PCBA.

1 The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.. 2 It can connect the SATA hard disk to SATA motherboard.. 3 It can connect the SAS hard disk to SAS motherboard.. 4 It can't connect the SAS hard disk to normal SATA motherboard. it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.. 5 It can't connect the SATA hard disk to normal SAS motherboard. it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.. 6 This SAS cable to 1x SATA with 50 cm length, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller hybrid controller..

SATA 7Pin Female to 7pin Male 90 Degree Angled Adapter Mainboard Motherboard for Desktops SSD HDD.. The adapter is designed for changing SATA 7pin Disk cable installation direction.. You can install the 7pin cable from vertical to horizontal direction with this adapter.. Which will solve the installation for the limited height chassis.. The package included 2pcs same adapters.down angled.

This micro SATA adapter enables you to connect a 1,8 HDD with Micro SATA 16pin interface directly to the SATA 22pin port of your mainboard or controller card.. CY 715pin SATA 22Pin to 16Pin Micro SATA 79pin DC 3.3V Adapter for 1.8 2.5 Hard Disk Driver. Connection SATA 22pin male Micro SATA 16pin female. 3,3V and 5V output for Micro-SATA. Micro SATA 79pin Connector..

2.5 inch IDE 44Pin SSD or HDD Drive to SATA converter Board. Works with all IDE 44Pin Drives up to 500GB. Supports IDE 66100133MBs . No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable.. Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.. Dimensions 2.72 x 0.55 x 0.69 L 69mm x D 14mm x H 17mm . Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux..

1 It can connect the SATA hard disk to SATA motherboard.. 2 It can connect the SAS hard disk to SAS motherboard.. 3 It can't connect the SAS hard disk to normal SATA motherboard. it will be worked if your motherboard has the SAS chipset, Otherwise can't work.. 4 It can't connect the SATA hard disk to normal SAS motherboard. it will be worked if your hard disk has the SAS chipset, Otherwise can't work.. 5 This SAS adapter enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller hybrid controller..

It can't connect the SAS hard disk to normal SATA motherboard. it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.. It can't connect the SATA hard disk to normal SAS motherboard. it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.. It can connect the SATA hard disk to SATA motherboard.It can connect the SAS hard disk to SAS motherboard.. It enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA hybrid controller.. CY SAS Adapter SFF-8482 SAS 29 Pin to SATA 22Pin Hard Disk Drive Raid Extension Adapter 90 Degree Angled.

CY 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter. This adapter is used for connecting a SATA power connector of the power supply to standard IDE 4-pin Hard Drive or Optical Drive.color Black.

You need to set your IDE 3.5 disk to master mode.. Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.. Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Windows 8 Windows 10 Linux.. No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable.. Works with all IDE 40Pin Drives up to 1000GB , Supports IDE 66100133MBs.

IDE 44Pin Disk to SATA Female Converter Adapter PCBA for Laptop 2.5 Hard Disk Drive 2.5 inch IDE 44Pin SSD or HDD Drive to SATA converter Board. Works with all IDE 44Pin Drives up to 500GB Supports IDE 66100133MBs. No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable.. Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.. Dimensions 2.72 x 0.55 x 0.69 L 69mm x D 14mm x H 17mm Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux..

SFF-8482 SAS 29 Pin to 7 Pin SATA Hard Disk Drive Raid Cable with 15 Pin SATA Power Port3.The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and 2 groups of 7 pins that carry the SAS data signals.. The SFF-8482 supports 2 SAS ports lanes tofrom the drive.This SAS cable to 1x SATA with 50 cm length, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller hybrid controller.7 Pin SATA Connector to 15 Pin Male Power Connector and 29 Pin SAS Connector.. Connector Details 1 x 7 Pin Serial ATA Male.Connector Details 1 x 15Pin Male.Connector Details 1 x 29 Pin SAS.Length 50cmapprox.. 1. It can connect the SATA hard disk to SATA motherboard.2. It can connect the SAS hard disk to SAS motherboard.3. It can't connect the SAS hard disk to normal SATA motherboard. it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.4. It can't connect the SATA hard disk to normal SAS motherboard. it will be worked if your hard disk has the SAS chipsit, Otherwise can't work..

for Desktop 3.5 Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB. Supports IDE 66100133MBs . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.. No need for an extra power supply.. No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 9898SE, Me, 2000, 2003, XP, Vista, Windows 7 Linux.. 3.5 inch IDEPATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA.

NVMe to 9 SATA Adapter is designed for less SATA Ports but more spare M.2 NVMe Slots on Motherboard, This M.2 SATA Adapter will help you expand 9x regular SATA ports for storage appliances that use many SSDs andor 3.5 hard drives. It has 9 SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. Base on High Speed chip, more stable and wider compatible. Not support hot swaping. No additional software installation or setting required,The advanced Heatsink on Chipset will help the chipset working in lower temperature, avoid having any issues with reliability due to overheating. NVME 9 SATA Adapter adopts dual-channel PCIe Gen3Gen4 interface M.2 M-Key 4x, SATA Ports Upload total of 16Gbps transmission bandwidth, Download Each of which supports 6Gbps. Fully compatible with SATA interface mechanical hard drivesSSD solid state hard drivesoptical drives, etc. Support Windows 7810, Windows Server 2008 R22012 R220162019 Mac OS Linux FreeNAS and various NAS operating systems.

Supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported.. This adapter has built-in chip, Can convert SAS disk to the SATA interface of the common motherboard, so SATA computers can also use the SAS disk and no need any SAS raid card.. If your SATA interface without SAS function, Connect our adapter, it can directly readwrite SAS hard disk, support win7, win10, win11, lunix operating system.. It is not recommended to connect the USB disk enclosure or cable, The USB master chipset is not adapted, incompatibility may occur.. After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing..

It was alowed to use dual SATA3 driver on M.2 A or E Key wifi port through SATA cable. Main control chipset JMB582, Support Dual SATA 3.0 Driver. Supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. Support error reporting, recovery and correction, partial and sleep power management states. Supports native command queue NEQ. Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Wide Compatibility- This adapter cable is compatible with a wide range of devices, including optical drives, CDDVD drives, and CD-ROM drives.. Stable and Durable Copper Construction- Crafted from high-quality tinned pure copper, this cable offers superior stability and durability. The tinning process adds a protective layer to the copper, enhancing its resistance to corrosion and wear, ensuring a long-lasting and reliable power solution.. Effortless Power Conversion- Transform your SATA 15-pin power into a 6-pin connector with ease, simplifying power connections and ensuring smooth operation for various devices.. Compact Design- With a length of 6.7 inches 17cm, the cable is designed for efficient cable management, reducing clutter and ensuring a tidy workspace.. Reliability and Durability- Manufactured by YiKaiEn, a trusted brand known for quality, this cable ensures stable power delivery over extended periods..

6Gbps High-Speed SSD Enclosure UGREEN hard drive reader supports 6Gbps max transfer speed and UASP accelerated transmission protocol, 70 Faster than traditional USB 3.0. The USB-C port is standard USB 3.1 Gen 2 which supports 10Gbps and 715Pin SATA III supports max 6Gbps. USB-C to USB-C Cable included. Advanced Built-in Chipset Built-in with ASM235CM chipset and premium aluminum alloy, makes the hard drive enclosure working with excellent heat dissipation, no cooling fan is needed for your high-speed working.. USB C Hard Drive Enclosure UGREEN hard drive enclosure can easily connect a 2.5 SATA SSD or HDD to your computer to expand storage, upgrade the system, back up files, retrieve and recover data, and transfer data. This external hard drive enclosure protects the hard drive from outside scratches and makes the hard drive portable for data storage.. Broad Compatibility 2.5 SSD Enclosure Fit with most 2.5 SATA III II I HDD Hard Disk Drive SSD Solid State Drive up to 6TB, compatible with WD Blue SATA PC HDD 2.5, WD GREEN 2.5 SATA SSD, Seagate Barracuda 2.5, Seagate FireCuda, Samsung 860 EVO850 EVO SATA III SSD, SSD PLUS, Crucial BX500MX500, Kingston A400 SATA SSD, TOSHIBA TR200, PNY CS900, DREVO X1, Integral, HITACHI.. Easy Installation HDD Enclosure Plug and play with tool-free installation, no driver is needed for this external hard drive case. Supports WindowsMac OSLinux systems, game consoles like Sony PS4PS3Xbox One, Smart TV, Router, etc. For the devices only with USB A port, please use your USB C to USB 3.0 A cable. No request for extra power supply..

Compliant with SATAISATAIISATA III USB 3.0-compliant with up to 5Gbps transfer speeds without compromising signal quality. Also, backward compatible with USB 2.0 and 1.1 standards.. Supports USB Full speed12Mbps High-speed480Mbps Super-speed5Gbps Compliant with USB Mass Storage Class Bulk-only transfer specification. Dual-Head IDE connector 40Pin 44Pin plus one SATA connector support 2.53.55.25 IDE and SATA devices a 2.5 to 3.5 IDE converter is required for 3.5 IDE drive. Operates with one IDE and one SATA HDD simultaneously External power supply provided Supports Plug-and-Play. System Requirements Microsoft Windows XP, Vista, 7, 8.1, 10 32 or 64 bit Mac OS X v10.6 and Up Linux OS USB 3.0 or 2.0 Equipped System For USB 3.0 Speeds, the System Must Support USB 3.0 Specification.

Supports IDE 66100133MBs. 2.5 inch IDE 44Pin SSD or HDD Drive to SATA converter Board. Works with all IDE 44Pin Drives up to 500GB. No need for an extra power supply..

It can't connect the SATA hard disk to normal SAS motherboard. it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.. It can connect the SAS hard disk to SAS motherboard.. It can't connect the SAS hard disk to normal SATA motherboard. it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.. This SAS adapter to 1x SATA 22pin, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller hybrid controller.. It can connect the SATA hard disk to SATA motherboard..

Connect your SATA IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Compatible read up to three hard drives simultaneously. One Touch Backup OTB Function. Design for people who need to backup data from your computer to portable hard drive. Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux. Plug and Play, Hot- swappable, no driver needed. OnOff Switch design for HDD protection. Led light shows power and activity status.. Support 2 IDE and 1 SATA hard drives connecting simultaneously Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive. SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected.

Rear SATA3.0 interface The new upgrade expands the four rear SATA3.0 interfaces, which is more suitable for narrow spaces. 2U can also be better fixed from the rear wiring, there will be no crossover with the graphics card. 4U, 2U universal This product is equipped with 4U, 2U double fixed brackets, which are supported by large or small chassis. Larger heat sink better heat dissipation and more suitable for long hours of work. PCI-E interface It is easy to install in the PCI-EXPRESS slot of the chassis with a thick gold-plated PCI-E interface. Better and easy data can effectively reduce the data loss rate. The tail is designed to be flush the chance of blocking the graphics card fan is smaller.

No need for an extra power supply.. Works with all IDE 40Pin Drives up to 1000GB. Supports IDE 66100133MBs. No driver needed, plug and play, unit is not hot swappable.. 3.5 inch IDE 40Pin HDD Drive to SATA converter Board.

Wide Hardware Compatibility This SFF-8482 to SATA 22-pin adapter is designed for specific server and storage configurations. Sas to sata adapter cable supports connecting SAS hard drives to motherboards equipped with SAS chipsets or hybrid SATASAS controllers. Explicit Usage Limitations Understanding the unidirectional design of this adapter is crucial. Sata connector cannot connect SAS hard drives to standard SATA motherboards lacking SAS chipsets. To use this feature, one of the following conditions must be met First, the motherboard must support SAS second, an external SAS card must be connected third, your SAS hard drive must support SATA mode. Stable Data Transfer This hard drive adapter uses the SFF-8482 interface specification, ensuring reliable signal integrity when used within its compatibility range. Sata to sas adapter supports high-speed data transfer on supported SAS or hybrid controllers, making it suitable for performance-critical environments. Gold-plated contacts and a molded PVC structure minimize signal loss, ensuring stable operation for tasks such as data backup, server upgrades, or storage expansion. Convenient Connectivity Design This adapter features an SFF-8482 SAS male connector and a SATA 22-pin 7-pin data 15-pin power female connector, providing a simplified connection solution. Sata adapter design allows you to directly connect SAS hard drives to the system's internal SATA power and data cables via the adapter, simplifying cable management within server chassis or racks. Rugged and Durable, Versatile Made of durable plastic and equipped with gold-plated copper contacts, this sas to sata adapter is designed for long-term use in chassis environments. Its low-profile design allows for easy installation in standard hard drive bays without interference. It is compatible with 2.5-inch and 3.5-inch hard drives using the SFF-8482 interface.

SATA to ESATA adapter it is ESATA female to SATA 3.0 male adapter 7pin to connector extension adapter.. Female esata to satar one end is ESATA external female connector and the other end is full package SATA male connector, which can be connected to ESATA and SATA cables used and for extension.. FeaturesESATA to SATA Power Adapter, convenient, compact, simple and fast. Compared with cables, it will not be limited by the current size. It can easily switch the power interface to link different devices. It does not take up space for daily use and plug and play.. Male to male sata adapter Material The entire adapter is environmentally friendly PVC material. The contacts are in good contact, and the power supply is stable and will not cause poor contact.. Esata cable to sata cable is faster than USB3.0 and USB2.0 adapter and the transmission speed is up to 6 Gbps. The TB hard drive of Esata Adapter can directly support file backup without using the network. Backward compatible with sata I, II, III hard disks. Note unplug the power before device configuration.

Universal IDE Hard Drive AdapterDual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. Support SATA 2.53.5 HDD up to 10 TB, IDE 2.53.5 HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Allowed to operate three hard disk drives simultaneously.. Stable Power SupplyIncluded 12V 2A power cable. 4PIN Power Cable is designed for 3.5 IDE drive.. SuperSpeed USB 3.0Data transfer rates up to 5Gbps, backward compatible with USB 2.01.1. Support Windows XPVista7810 and Mac OS.. Driver FreePlug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. What We OfferSATAIDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1 24h-friendly customer service and email support..

SFF 8643 to SFF 8482 minisas to sas breakout cable, internal mini sas hd connector male connect to sas controller or motherboard, sas 4 sff-8482 connectors with sata power connect to backplane or 4 hdd, each SAS sff-8482 adapter contain sata 7pin data and sata 15pin power connector, NO middle SAS pins, Note sff-8643 to 4 sff-8482 cable do Not work with SAS Driver, Donot connect sff-8643 on your backplane, otherwise the mini sas hd to sas breakout will not work with them. Mini sas to 4 sas sff-8643 to 4 sff-8482, sas 8643 host connect sas hba or pcie controller, mini sas to sas sff-8643 sas forward breakout link between the serial scsi controller and the sata disks, need to attach sata power cables to each sas to sata adapter connector, sas 8643 8482 cable data transfer rate up to 6Gbs per drive. 8643 breakout cable with power, 8643 male sas connector for expand storage use, sas to sas cable are labled, simple up your cable management game, mini sas sff-8643 sff-8482 data transfer cable easy link serial SCSI controller and the SASSATA connector. SFF-8643 sas breakout cable build with thin sas cable and tapebraid weaved design,durable material, the outermost layer of the SAS raw cable is wrapped in an aluminum foil for shielding and mylar covered, nylony braid weaved enhances durability and longevity, Length choice mini sas to sas with power shortsff 8643 8482 0.5m and long sas breakout cable8643 4sas 1m, braided sff-8643 to 4 sas cable easy to route after installation, the sff-8643 to sas cable is good choice for DIY and professional installers. What you get sff8643 to sas 1.6FT0.5M,1xPCS sff-8643 internal mini sas hd to 4 sas sff-8482 with sata power adapter cable.

Mini sas 36 sff-8087 to sff-8482 sas forward breakout, internal mini sas 36 pin sff-8087 sas connector male connect to sas raid controller or motherboard, SAS 4 sff-8482 connectors with sata power connect to hard driver or 4 hdd, each sas sff8482 adapter contain sata 7 pin data and sata 15 pin power adapter, No middle SAS pin, Note sff-8087 to 4 sff-8482 cable do Not work with SAS Driver, Donot connecter SFF-8087 on your backplane, otherwise the mini sas to sas breakout will not work with them. Mini sas to 4 sas sff-8087 host to sff-8482 target, sas 8087 host connect to sas hba or pcie controller, mini sas 36 sff-8087 to 4 sff-8482 connectors with sata power link between the serial SCSI controller and the SATA disks. 8087 breakout cable with power, 8087 male sas connector for expand storage use, sas to sas cable are labled, simple up your cable management game, mini sas sff-8087 sff-8482 data transfer cable easy link serial scsi controller and the sassata connector. SFF-8087 sas breakout cable build with thin sas cable and tapebraid weaved design, length choice mini sas to sas with power shortsff 8087 8482 0.5m and long sas breakout cablemini sas to 4x sas 1M, braided sff-8087 to 4 sas cable easy to route after installation, the mini sas to sas breakout cable is good choice for DIY and professional installers. The package you will receive includes 3.3FT1M,1xPCS Internal Mini sas 36pin sff-8087 to sas sff-8482 4X with SATA power adapter cable.

High compatibilityConnect your SATA IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Compatible read up to three hard drives simultaneously.. Intelligent BackupOne Touch Backup OTB Function. Design for people who need to backup data from your computer to portable hard drive. Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux. Convenient to useHard Drive Adapter Plug and Play, Hot-swappable, no driver needed. OnOff Switch design for HDD protection. Led light shows power and activity status.. Simultaneous useSupport 2 IDE and 1 SATA hard drives connecting simultaneously Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive. High-speed transmissionSuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected.

SATA to 8 Pin GPU Power AdapterConnects a PCIe video card with an 8 pin or 6 pin connector to a power supply with two spare SATA power connectionsThe 8 pin 62 end could be used as 6 pin or 8 pin end by sliding onoff the 2 pin.. SolutionProviding a convenient solution for a power supply without PCIe connection for GPU power, Dual SATA connectors were designed to connect separate rails to power the PCIe video graphics card from an older PSU. CompatibilityCompatible with 8-pin or 6-pin graphics cards from popular manufacturers such as ASUS, ASRock, EVGA, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc.. ParameterLengthincluding connectors 9-inch23cm, Gauge 1007-18AWGstandard tin-coating copper wire, Quantity 2pcs, Rated power 300W, Self-adhesive tape1pcs. NotePlease check the specifications of your graphics card and PSU for power requirements,and make sure that both ends of the cable fit your devices.

Sata to molex adapter molex 4pin ide male to sata 15pin female adapter converter.. Sata power adapter is suitable for sata power cables to connect hard disk drives, solid state drives, HDD, SSD, CD drives, DVD drives, etc. Sata 15pin to molex 4pin adapter can reduce damage of sata power cables and extend the service life of sata power cable.. Molex to sata power adapter has a latch design, which is used for a secure connection on end to prevent accidental disconnections, not easy to fall off.. Molex to sata adapter installation tips - Easy plug and play installation, fixed and secure connection and it is not supported when hot pluggingwhen you changing the power cord, you must turn off power. Molex ide to sata adapter is made of high quality PVC and metal, which is environmentally friendly, stronger, and wear-resisting, lightweight and convenient to anywhere..

QUICKLY ACCESS TO SATA SSDHDDHard drive adapter Support SATA 2.53.5 HDD 2.53.5 IDE HDD, 5.25 external CD DVD optical drive is able to retrieve old data from a hard drive with ease, with 2 IDE Connectors 40-pin and 44-pin plus one SATA III Connector. SUPERSPEED UP TO 5Gbps with USAP IDE hard drive reader supports a data transfer rate of up to 5 Gbps and supports UASP. which is 70 Faster than traditional USB 3.0 and 40 reduction in required processor resources, Backward compatible with USB 2.0 1.1. Huge 6TB Capacity SupportiveDesigned to be lightweight and compact. hard drive recovery converter supports a hard drive capacity of Up to 6TB capacity, Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turn on the disk. PLAYPALY SIMPLE RECOGNIZED The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure. Its plug-and-play and doesnt require drivers. Warm Tip Windows can only recognize and assign a drive letter to drives that are formatted in a compatible way. If this is a new drive, you need to format. Additional Functions Easy to Use This tool made data recovery a breeze, onoff switch for HDD protection. LED light shows power and activity status. comes with a 12V 2A power supply, so you can power larger form-factor SATA or IDE drives, 4PIN Power Cable is designed for 3.5 IDE drive. Broad CompatibilityYou can use IDE drives, standard SATA drives, The USB to IDE SATA adapter compatible with Windows 10 8.1 8 7VistaXP, Mac IOS, and LINUX Plug and play support hot swap.

Supported Hard DriveFIDECO hard drive enclosure can support 2.5 and 3.5 SATA hard drives. Please note that it cannot support any IDE hard drive.. 5Gbps Super SpeedFIDECO HDD enclosure is engineered with USB 3.0 interface and can offer data transfer speeds up to 5Gbps. The hard drive reader can be also backward compatible with USB 2.0.. Support UASPFIDECO SATA to USB adapter can support UASP USB Attached SCSI Protocol for better and faster data transfer performance.. Compatible SystemFIDECO HDD lay-flat docking station is compatible with Windows, Mac, and Linux. Just plug and play No drivers needed. Warm NoteFor new HDD, it needs to be initialized and then it can be recognized by computer. We can offer firmware update and technical support. Any other question, contact us at supportfideco.cn..

Wide CompatibilityFIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE SourceSATA2 Target SATA1 SourceSATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously.. Offline CloneFIDECO hard drive converter can support offline clone. No computer is needed Just press the CLONE button for 3 seconds until the first blue light 25 flashes. You can operate offline clone only in 2 combinations IDE SourceSATA2 Target SATA1 SourceSATA2 Target. Capacity requirement SATA2 Target IDESATA1 Source.. Compatible SystemFIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed. 5Gbps High SpeedFIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds It can be also backward compatible with USB 2.01.1.. Warm NoteFor new HDDSSD, please go to Disk Management to initialize it first, and then your HDDSSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer technical support and firmware update..

Universal SATAIDE Hard Drive Adapter It can support 2.5 3.5 SATA IIIIII Hard Drive and 2.5'' SATA SSD 2.53.5 IDE Hard Drive DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW. This usb universal hard drive adapter supports up to 16TB hard drives, which is a perfect solution for backup processing IT data, batch processing data, formatting, file transfers etc. Super Speed USB 3.0 USB 3.0 supports transfer rates of up to 5GbpsThe actual transmission speed is limited by the setting of the device connectedDownwards compatible with USB 1.12.0.. Pulg Play Support Plug and play hot swap, OnOff power Switch for Hard drives protection. Tips Some IDE hard drive is old, you need to set jumper to turn on the disk set the master disk and the slave disk.. System Compatibility Support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux etc. Support devices PS4XboxTVmonitoring equipment.. Customer Focus Our goal is to give you a 100 satisfaction shopping experience and we provide one-year warranty..

2.5 to 3.5 Drive Adapter- ORICO ssd adapter can easily convert 2.5-inch SATA drives to 3.5-inch size. Compatible with any 7 9.5 12.5mm 2.5-inch hard drives. Convenient Use - The ssd caddy itself has a SATA III interface, which does not require data cables and drivers, supports hot swapping, plug and play. Compatible with Windows, Mac OS and Linux. 6Gbps SuperSpeed - Adopting SATA 3.0 protocol, the maximum transmission rate of this 2.5 to 3.5 ssd converter is up to 6Gbps, which enables high-speed transfer of HD movies and data. Backward compatible with SATA III. Perfect FitThe screw holes of this ORICO 2.5 to 3.5 ssd caddy are specifically designed for fixing 2.5 inch hard drives and for fixing itself into the drive bay, which will secure your HDDSSD better. Wide Application - It can be used anywhere 3.5-inch drives are commonly used, including desktop computer drive bays and side or bottom mount drive enclosure trays. ReminderThis 2.5 to 3.5 adapters is made of high-quality flame-retardant ABS material with 3.52 ounces,which is lightweight and easy to carry. Before purchasing,Please make sure if the product materials meet your requirements.

Universal IDE SATA to USB 3.0 Adapter Alxum hard drive reader support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Little triangle pro converter with dual-head IDE connector 40-pin and 44-pin plus one SATA connector Tips 4PIN Power Cable is designed for 3.5 inch IDE drive.Using Alxum hard drive transfer kit you can connect the external drive to add storage, perform backups, implement data recoveries and transfer content to your laptop.. 5Gbps High-Speed Transmission Alxum SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1. supports UASP. Which is 70 faster than traditional USB 3.0 and has a 40 reduction in required processor resources. Alxum IDE to SATA adapter hard drive connector is universally compatible with Windows 7 Vista XP20032000ME MAC OS X, and Linux. Just plug and play, easy to use. No driver or software is needed. Huge Capacity Supportive Alxum IDE Hard Drive Adapter has a huge capacity. Allowed to operate three hard disk drives simultaneously. The LED indicator of the USB to SATA IDE adapter can monitor the working status and automatic sleep mode after 30 minutes of inactivity. Hard drive reader to USB support hot swapping, onoff switch for HDD protection. Alxum pocket design hard drives recovery converter is lightweight and compact, mini portable size makes it easy to carry during business travel.. Get Drives Active Alxum USB IDE Adapter USB 3.0 to SATA IDE Hard Drive Converter Combo for 2.5 3.5 IDE SATA SSD Hard Drives Disks. Suitable for Professional and Home Use With the need for data security and data recovery. Alxum USB hard drive adapter could turn any standard 2.5 3.5 IDE or SATA drive into a convenient external drive. Support adding drive space, performing backups, creating disk images, and implementing data recovery transfer files from a computer or notebook.. What You Will Get 1 x USB 3.0 to SATA IDE converter,1 x USB 3.0 male to male cable 2.62ft,1 x Simple users manual,1 x 12V2A power supply can power larger form-factor SATA drives or IDE drives, 1 x 4Pin Molex cable When using the older parallel IDE connection,1 x USB C to USB Adapter compatible with most laptops, and tablets with a USB Type C port. Any doubts you have when using, we are glad to offer 24h-friendly customer service and email support..

Universal SATA to USB Adapter This versatile SATA to USB adapter allows you to easily connect any 2.5-inch or 3.5-inch SATA hard drive HDD or solid-state drive SSD to your computer via a USB 3.0 port. It functions as an external enclosure converter, making it a perfect USB to SATA hard drive adapter for data recovery, drive cloning, or extra storage.. Included Power Supply for 3.5 Drives Unlike basic adapters, this kit comes with a 12V2A power adapter, making it a complete SATA to USB adapter with power supply. This ensures stable and sufficient power for larger 3.5-inch desktop hard drives that require extra energy to operate, preventing connection drops or data corruption.. SuperSpeed USB 3.0 Performance Experience fast data transfer speeds up to 5Gbps with the USB 3.0 interface. This SATA USB adapter is backward compatible with USB 2.0, allowing for quick access to your files and efficient backups, significantly reducing waiting time compared to older standards.. Easy Plug-and-Play Operation Get started in seconds This USB to SATA adapter with power requires no complicated software or drivers for most operating systems Windows, Mac, Linux. Simply connect the SATA and power cables if needed to your drive, plug the USB into your computer, and your drive will be instantly recognized.. All-in-One Durable Kit This is more than just a simple cable it's a complete external drive solution. The package includes the main SATA to USB adapter board, a USB 3.0 data cable, and a dedicated power supply, providing everything you need in one box to turn your internal SATA drive into a fully functional external storage device..

One Female SATA 715pin port, one 3.5Male PATA port 40-pin IDE, and one 4-pin Molex power connection Adapter. Adapter allows you convert hard drive interfaces to work with newerolder systems Supports ATA. Converts Parallel ATAPATA, ATA, IDE to Serial ATA SATA Converts SATA to PATAATAIDEEIDE. This SATA to IDE Adapter,No driver needed, plug and play. Package Contents Sata to Pata Interface Adapter 1PCS.

2.5in TO 3.5in SATA ENCLOSURE The 2.5in to 3.5in hard drive adapter enclosure mounts a 2.5in SATA or SAS hard drive HDD or solid-state drive SSD into a 3.5in front drive bay Vented design enables heat dissipation for maximum performance. VERSATILE FUNCTIONALITY The 2.5in to 3.5in SATA adapter enclosure lets you substitute a 3.5in hard drive for a 2.5in SAS or SATA SSDHDD in any application that would typically require a 3.5in drive form factor Front Power Indicator LED. TOOLLESS DESIGN The hard drive converter enclosure fits directly into a standard 3.5in hard drive bay, including mounting points, and SATA connector locations Toolless design with spring latch door facilitates convenient drive setup and access. MAXIMUM COMPATIBILITY This 2.5in to 3.5in hard drive adapter enclosure works with any 2.5in SAS or SATA HDD SSD, up to 15mm drive height Compatible with SAS III and SATA IIIIII drives. THE IT PRO'S CHOICE Designed and built for IT Professionals, this 3.5in hard drive enclosure is backed for 2 years, including free lifetime 245 multi-lingual assistance.

PRO IDE HARD DRIVE CONVERTER - Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. Support SATA 2.53.5 HDD up to 10 TB, IDE 2.53.5 HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Allowing you to connect and operate TWO drives SATA and one IDE simultaneously. NOTE Can not read the two IDE at same time.. TYPE C 6 GBPS USB 3.0 - With data transfer rates of up to 6 Gbps for SATA 3.1, you can expect fast and efficient file transfers. The USB C adapter is backward compatible with USB 3.02.01.1 for added convenience, 5Gbps transfering rate for IDE hard drive disk.. PLUG AND PLAY - Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. PLUG AND PLAY - Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. WHAT WE OFFER - SATAIDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1 24h-friendly customer service and email support..

Universal IDE Hard Drive Adapter Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector.. USB3.0 Super Speed Data transfer rates up to 5 Gbps, 10 times of USB2.0, backward compatible with USB 2.01.1. Support read three hard drives simultaneously.. Stable Power Supply Hard Drive External Enclosure Included 12V 2A power cable is for providing stable electricity supply. Note 4PIN Power Cable is designed for 3.5 IDE drive, SATA drives are not applicable and unnecessary.. Additional Functions Plug and play, no driver needed Hot Swap One Touch Backup function OnOff Switch for HDD protection. LED light shows power and activity status. Automatic Sleep Mode after 30 minutes of inactivity.. One Touch Backup Please download the OTB software to use the One Click Backup feature, and check the network manual for details if necessary.. What we offer USB C to IDESATA Adapter, USB C to Micro USB Cable, 4PIN Power Cable, Power Adapter,24h customer email support..

Wide Compatibility Our SATA adapter supports a wide range of storage devices, including 2.53.5 SATA HDDs and SSDs, 2.53.5 IDE HDDs, as well as DVD-ROM, CD-ROM, CD-RW, DVD-RW, and DVD-RW optical drives. It features a dual-head IDE connector 40-pin and 44-pin, along with a SATA III connector, allowing you to connect and operate two drives simultaneously one IDE one SATA.. Fast Speed With data transfer rates of up to 5 Gbps, you can expect fast and efficient file transfers. The sata to USB C adapter is backward compatible with USB 2.01.1 for added convenience.. Stable Power Provided To ensure stable power supply, we provide a 12V 2A power cable. Additionally, the 4PIN Power Cable is specifically designed for 3.5 IDE drives.NOTE The included 4Pin power cable is only required for 3.5'' IDE HDDs, no need to plug it in a 3.5'' SATA HDD even it comes with 4 big power pins.. Human-Friendly Design Our SATAIDE adapter is plug and play, allowing for easy installation and use. It also supports hot swapping, enabling you to connect or disconnect drives without the need for restarting your computer. The adapter includes an onoff switch for HDD protection, and the LED light indicates power and activity status.. Package 1 X SATAIDE Adapter, 1X USB 3.0 Cable, 1 X 12V2A Power Adapter, 1 X 4Pin Power Cable. We take pride in offering top-notch customer support. If you have any questions or concerns, our dedicated customer email support team is available 247 to assist you..

SPECIFICATION Item Type Adapter Material for PCB Color Weight Approx. 13.0g0.5oz Application PS2 IDE original network adapter.. HARD DISK A largecapacity for hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time.. PCB BOARD MATERIAL Highquality for PCB board material, with fast operation speed and excellent performance.. SUITABLE FOR PS2 Precise cut, perfect fitness, suitable for PS2 IDE original network adapter.. EASY TO INSTALL Equipped with mounting screw pack, which makes it easy to install and detach. Small and lightweight, convenient for us to storage and a good replcement accessory..

SATA Expansion Card 4 PortsThis PCIE SATA card has two SATA 3.0 ports with 6Gbps transfer speed, suitable for both largesmall PC cases, compatible with Windows 11 10 8 7 Vista MAC NAS Linux OS etc, for PCI Express X1 X4 X8 X16. Note Only MBR boot is supported, UEFI boot is not supported.. Excellent Heat DissipationThe PCIE SATA expansion card built-in alloy material heatsink with large area to effectively dissipate excess heat, so that the two SATA ports are always at room temperature and work more stably.. High Efficiency PerformanceSupports AHCI mode and NCQ capabilities, this sata expansion card allowing you to increase the overall performance of your hard disk by 5-20. Supports hot-swapping and IDE mode programming interface.. Durable and Stable15U gold-plated conductor improves conductivity and reduces wear and tear, ensuring faster and more stable transmission. Thick PCB board resists high and low temperatures and will not deform after prolonged use.. Support System Compatible with Windows 78 3264 bit, Vista1110MAClinux. Does not support XPServer 2003. Equipped with a replaceable bezel to support 4U2U chassis. WindowsR XPServer2003Note Please make sure the product is compatible with your computer before purchasing. For products with SATA interface, WIN1011 does not need to install the system, and if you use WIN7, WIN8 and blue screen happens, you need to reinstall the system..

Device Type Storage controller - plug-in card - low profile. Interface Type PCI Express x1. Dimensions WxDxH 6.6 in x 2.6 in. Data Transfer Rate 320 MBps. Controller Interface Type Ultra320 SCSI.

SCA 80 Pin Female to IDE 50 Pin Male Adapter converts the 50-pin interface to the 80-pin interface, so that the 50-pin low-speed SCSI device can be connected to the 80-pin SCSI interface for use.. Note This is a 50-pin IDE, not a 40-pin or 44-pin IDE, and it cannot be used in ordinary computers. It can only be used on industrial server IDE 50-pin interface motherboards.. Need to connect molex 4 pin power connector to power the hard drive.. It is recommended to be used for direct data transfers or backups.. Suitable for disks, tapes, CD-ROMs, rewritable optical drives, printers, scanners and communication equipment, etc..

Using professional SAS wire, 0.5 m cable length.. SAS SATA hard disk will be converted directly connected to the motherboard SATA port, ordinary board can also enjoy direct high-speed SAS hard drives.. SATA supports up to 6GB SATA3 mode.. Please check before buying whether to support SATA hard disk manual mode, not all SAS hard drives can be used.. This product generally has 2 usages 1. Separate the data and power supply of the SATA hard disk interface, connect the motherboard SATA interface and the power cord, which can be directly connected. Before using the SATA motherboard, some motherboards must be set to the AHCI mode optional RAID mode for RAID.. 2. Separate the data of the SAS hard disk interface from the power supply, connect the motherboard SAS interface SFF-8482 and the power cord, which can be directly connected.. This product cannot be used to connect a SAS hard disk to the SATA port of a normal motherboard.. If a SAS hard disk is to be used on a normal SATA motherboard, the hard disk must have the SATA logo the SATA interface on the motherboard clearly marked SAS to indicate that the motherboard supports SAS.

Package includes EZ-Connect Adapter with one touch back-up feature, USB Connector, SATA Connector, Power PlugAC Adapter. Connect to three different sizes of drive mechanism to USB 2.5, 3.5 and 5.25 Inches. Supports both SATA and IDE types of drives. Dual output power supply with standard 4 pin power output and new SATA power output. AC power cable. Hi-Speed USB 2.0 to SATA or IDE Interface up to 480Mbps. Supports 2.5 and 3.5 SATA Drive SSD or HDD. SATA Drive Hot-Swap Capability. Includes One Touch Backup OTB Button. Screw-less and Easy-to-Connect Design. Dual output power supply with standard 4 pin power output and new SATA power output. Compatible with Windows and Mac OS No drivers needed. LED indicator for HDD Access and Power status.

Internal SCSI Adapter - Converts 50 Pin to 68 Pin Male to Male.. Item received may not match photo or specs shown. It is manufactured in China.

Converts a SCA 80 Pin Hard Drive Interface to SCSI IIIIII UW HD 5068 Pin Connector. Compatible with SCA SCA-2 80 Pin. Jumper setting for 16 SCSI IDs. Spindle synchronous Delay start Remote start 4 Pin Power Connector Status LED connector pins. Adapter 80 Pin connector is female.

Universal IDE SATA to USB 3.0 Adapter Hard drive reader support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer. SuperSpeed up to 5Gbps IDE to USB adapter supports a 5Gbps high-speed transfer rate up to 10x as fast as USB 2.0, which is 70 Faster than traditional USB 3.0 and 80 reduction in required processor resources, Backward compatible with USB 2.0 1.1.. Broad Compatibility External hard drive to usb adapter support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux, etc. Support devises PS4Xbox, Plug Play, No Drivers Needed NDN for multiple OS. Huge Capacity Supportive Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and activity status.OnOff power Switch for Hard drives protection. Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turning on the disk. Comes with Power Supply OTG Adapter The 2 Amp 12 Volt power supply is helpful to be sure you've got enough power for mechanical motors of 3.5 spinning and 5.25 optical drives.4 pin Molex power for a 3.5 IDE drive, USB-C to USB adapter can be plugged into a USB C port to match your laptop.

Product Name SCSI Card 68-80 SCSI hard disk adapter 68 Pin Female to 80 Pin Male SCSI 80 pin, 68 pin adapter. SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 80 pin interface to 68 pin interface. In this way, 80 pin low-speed SCSI devices can be connected to 68 pin SCSI interface.. SCA 80 Pin to 68. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start remote start.. The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives.. Product category chip level maintenance tools - hard disk maintenance tools - hard disk other tools..