Picatinny rail for the Savage Rascal Rifles platforms. Not compatible with other Savage Arms rifle models.. Include 5pcs 6-48x14 screws. Length 5.7.. Use for the mounting of Picatinny standard scopes, red dots, magnifiers, or laser sights.. Sleek new design allows you add on any standard 21mm picatinny or weaver accessories. Mounting hardware included.. Made out of durable high quality material - 6061-T6 aluminium alloy. Sturdy and durable..

Picatinny rail mount built specifically for Savage Savage 93 93r17 Mark II Rifle platforms. Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Only compatible with Savage 93 93r17 Mark II Rifle platforms, not compatible with other Savage Arms rifle models. All Monstrum scope mounts and accessories come with a lifetime guarantee.

Adjustable 4-12 times magnification, for targeting out to 800 yards and beyond. An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation. Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog. Precision 14 MOAclick windage and elevation adjustments with locking turrets. Package includes High Profile PicatinnyWeaver Scope Rings and set of flip-up lens covers.

Picatinny rail mount for Savage 93 93r17 Mark II Rifle. Include 6-48x14 and 8-40x14 screws. The rail sections are compatible with both Picatinny and Weaver based rings and optics.. Crafted from lightweight 6061 grade aluminum.. lifetime warrante.

30mm Scope mount 30 mm diameter scope rings with 1.43 inch ring center height are compatible scope mount for Picatinny rails and more scope rings and mounts Made from aircraft-grade 6061-T6 aluminum alloy and CNC machined ensures precision. Tempered lugs hardened through heat treatment to enhance durability, ensuring secure fastening performance even under frequent disassembly and vibration conditions with quick-release nuts for rapid detachment.. Full rings lappings Improves fit precision between scope and base to minimize optical distortion, while enhancing structural integrity to reduce vibration-induced accuracy loss. Anti-loosening screw Heat-treated for impact resistance, preventing vibration-induced accuracy degradation and extending service life.. Torque specifications 65 inlbs for the rail 12 nut and 25 inlbs for the scope T15-TORX socket. These values ensure secure and vibration-resistant installation per MIL-STD-1913 standards. Scope Mount Kit 30 mm scope mount , a wrench. Designed for a precise fit on Picatinny rails, this product seamlessly integrates with most Picatinny-compatible devices, including popular models like , AR-15, Endura, M12M14, Accura V2, Optima V2, 700, RS11, Cricket, and M1Aensuring reliable performance and easy installation..

Picatinny rail for the Savage Rascal Rifles platforms. Not compatible with other Savage Arms rifle models.. Include 5pcs 6-48x14 screws. Length 5.7.. Use for the mounting of Picatinny standard scopes, red dots, magnifiers, or laser sights.. Sleek new design allows you add on any standard 21mm picatinny or weaver accessories. Mounting hardware included.. Made out of durable high quality material - 6061-T6 aluminium alloy. Sturdy and durable..

Universal Compatibility Picatinny rail designed for Savage Axis, Axis II, Edge, and Axis XP rifle platforms. Dual System Compatibility The rail sections are compatible with both Picatinny and Weaver based rings and optics. Complete Hardware Included Include 6-48x14 and 8-40x14 screws for compatibility with both older and newer Savage Axis models. Durable Construction Crafted from lightweight 6061 grade aluminum for long-lasting performance. Easy Installation Designed for straightforward mounting on Savage rifle platforms with included hardware.

Picatinny rail for the Remington 788 Short Actionrifles platforms. The rail sections are compatible with both Picatinny and Weaver based rings and optics.. Include 6-48x14 and 8-40x14 screws for compatibility with both older and newer Savage Axis models.. Crafted from lightweight 6061 grade aluminum.. lifetime warrante.

Transform your rifle in an instant With the Monstrum Hypergrip Series QD Scope Mount, you can quickly swap out your optic to meet the needs of any situation.. The Hypergrip Cantilever Scope Mount is a dual ring scope mount with a one inch forward offset allowing for flexible placement of your preferred optic.. Mounts secure to any flat top Picatinny equipped rifle via the Monstrum Hypergrip QD mount system. Fastened by adjustable tension QD levers, with no tools required, and anchored in place by the unique Hypergrip locking mechanism.. The Monstrum Hypergrip QD Scope Mount is available for 1 inch, 30 mm, and 34 mm diameter rifle scope tubes.. All Monstrum products are backed by a lifetime guarantee.

Premium Construction and Complete Package One piece scope mount made of 45 steel with 0 MOA, equipped with two sets of screws for old model 6-48 and new model 8-40, manufactured from Grade 12.9 carbon steel with anodized treatment, includes T-15 torx wrench. Ergonomic Design Specifications Rail picatinny mount features circular arc design at ends to reduce sharp edges, 18-slots configuration, total length measures 7.48 inches 190mm. Wide Compatibility Range Rail mount compatible with Savage Edge, Savage Axis, Axis XP, Axis 2, Axis 2 XP, Axis 2 Hardwood, and Axis 2 PRO models. Versatile Mounting Options Allows for the mounting of Picatinny standard scope rings, scope mounts, red dots, or other optics accessories. Durable Steel Construction Manufactured from high-quality 45 steel material ensuring long-lasting durability and reliable performance for your shooting applications.

Better Construction The first standout feature of the CVLIFE shooting bipod is its construction. Made from durable and lightweight materials, made of hardened steel and aluminum. It provides a dependable, stable shooting platform. It weighs 11 ounces and exhibits excellent build quality, ensuring that it can withstand the rigors of outdoor use.. Sling Stud Mounting System Attaching and detaching the CVLIFE bipod is quick and easy with its rapid-attach sling stud mounting system. It also has an extra sling loop so you can attach a rifle sling rope to it.. Easier installation and Adjustment Self-locating, stainless steel clasps ensure perfect alignment when mounting, and the large thumb wheel allows for a strong hold and easy tightening, allowing you to customize the mounting tension to suit your preferences.. Six-level Height Adjustment The bipod's compact size and folding capability also make it convenient for transportation and storage. The adjustable legs of the rifle bipod offer great versatility, from 7.5 to 10.6 inches. The pivot bipod locks into place with a satisfying click, ensuring a tight fit.. Anti-Slip Rubber Feet Anti-slip Rubber feet, even in very cold temperatures. Can preload reasonably well on concrete shooting benches, mowed grass, roofing shingles, and asphalt pavement. With rail-loaded detents, you can easily extend or retract the legs to find the desired height and position. NOTICE Adapter not included.Applicable for sling swivel stud rifle..

Picatinny rail for the Winchester XPR Short Action. The rail sections are compatible with both Picatinny and Weaver based rings and optics.. Include 6-48x14 and 8-40x14 screws f. Crafted from lightweight 6061 grade aluminum.. lifetime warrante.

Picatinny rail for the Savage AxisAxis II Edge rifles platforms. The rail sections are compatible with both Picatinny and Weaver based rings and optics.. Include 6-48x14 and 8-40x14 screws for compatibility with both older and newer Savage Axis models.. Crafted from lightweight 6061 grade aluminum.. Lifetime warranty..

Picatinny rail for the Savage AxisAxis II Edge rifles platforms. The rail sections are compatible with both Picatinny and Weaver based rings and optics.. Include 6-48x14 and 8-40x14 screws for compatibility with both older and newer Savage Axis models.. Crafted from lightweight 6061 grade aluminum.. Sleek new design allows you add on any standard 21mm picatinny accessories. Mounting hardware included..

Perfect for All 21 mm Picatinny Rails This set includes 2 pieces medium profile and 2 pieces high profile. Suitable for all 1 inch 25.4 mm scope tube.. Built-in Tape Protection Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.. Lightweight Aluminum alloy with black anodized surface, sturdy and lightweight. The hollowed out is designed to be extremely lightweight and provide potential vision.. Rail Clamp Screw Design With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly. Comes with 2 pieces allen wrench.. Size Detail Medium Profile Dimension 1.9 x 1.6 x 0.8 inch, Weight 2 ounce High Profile Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 ounce..

Monstrum Adjustable Elevation Scope Rings allow for the scope plane to be angled downward to provide a greater range of downward elevation adjustment for longer distance shots. The innovative scope ring design allows the rings to be angled in tandem in a level downward plane regardless of angle. Rings can be adjusted via two locking screws from 1.20 of height up to 1.50 inch of height, measured from rail surface to the center of the tube. 30 mm diameter scope rings. Includes 1 inch inserts for compatibility with 1 inch scope tubes.. Compatible with Picatinny mounting platforms. Not compatible with Weaver bases..

1 Inch Scope Mount CVLIFE 1 scope mount is suitable for scopes with a diameter of 1, the spacing between the rings is 2.36, the center to base height is 1.57, base length is 3.. Hold Well Zero Two screws on each side of the ring provide a recoil-resistant grip to your scope, with great alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.. Offset Cantilever Mount Scope mount features a 2.4 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.. Lightweight Material This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesnt add much extra weight to you.. Torx Screws Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life..

Perfect for All 21 mm Picatinny Rails LONSEL 2 Pcs Medium Profile 1'' Picatinny Scope Ring, fit for standard picatinny rails, perfect for mounting most scopes which are In 1'' 25.4mm scope tube.. 1 Inch Scope Rings Perfect fit for 1 scope. 2 Pcs Medium Profile 0.5'' height from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.. Hollowed-Out Design Built-In Tape Protection Design in see-through style, provide potential visibility, and hollowed-out design helps to reduce unnecessary weight. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.. Aluminum Alloy, Solid Durable Precision machining of aircraft grade 6061 aluminum alloy high strength steel in black matte anodizing finish. Sturdy lightweight construction, build no wobble.. Clamp Screw Design Easy To Install With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist onoff the rail clamp screw nut via allen wrench and mount the base on 21 mm rail, simple and quick to remove or install. Comes with 1 pcs allen wrench and 1 pcs spare screw..

Rail mount compatible with the Savage 93,Savage 93R17, Savage Mark II, with steel providing maximum strength and accuracy, it's durable and precise. Rail mount ends circular arc design to reduce sharp edges,14-slots,total length 5.9 150mm. One-Piece rail mount it allows for the mounting of Picatinny standard scope rings, scope mounts, red dots, or other optics. Rail Scope Mount,made of 45 steel, 0 MOA, it is equipped with two sets of screws 6-48 and 8-40 screws are manufactured from Grade 12.9 carbon steel with anodized treatment and T-15 torx wrench.

Lightweight Aluminum with Rigid Unibody Design Crafted from high-strength aircraft-grade aluminum and precision-engineered with strategic weight-saving cuts. The mount delivers sturdiness and portability, making it ideal for hunting. Recoil Lugs Hold Well Zero 4 recoil lugs at the bottom, which can be integrated with your top platform, zero wobble, more solidly mounted where you place it, and keep zero consistently under impact. Offset Cantilever Mount Scope mount features a 1.5 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use. Torx Screws Easy Accurate Mounting Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life. Max torque 18 inlbs rings screws, 30 inlbs base screws. Scratch-Resistant Type III Hard Anodized Finish This finish puts a tough outer layer on your gear, making it harder and more resistant to scratches and dings. The beveled edge design on the ring prevents scratching of hands.

1 Pack FENTUK Scope Ring Adaptors With Picatinny Rail 1 Inch 30 mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability.. Fit for 30 mm 25.4 mm Scope Tube Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30 mm 1.18 inch to 25.4 mm I inch, effectively switch between two sizes, perfectly meeting your different needs.. 4 Slots Picatinny Top Rails Top 4 Slots 1.77 picatinny rail design, allowing you add on standard 21 mm Picatinny accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backupsecond laser sights, optics and other accessories.. Aluminum Alloy, Solid Durable Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy durable, lightweight compact construction, offer stable safe performance in the field. Item size 1.77 L x 1.72' 'W x 1.70'' H, item weight1.38 Oz 1 pcs.. Easy To Install Remove Our Scope Ring Barrel Mount is easy to install or remove via the comes with hex wrench tool, the double screws design on both sides makes this mount very secure for any scope. Note For 1 inch rings, gaskets need to be installed For 30mm rings, no gasket is required..

The cantilever ring mount positions the center of the riflescope tube at a height of 1.6 inches 40.6 mm from the base. Weighs 5.5 ounces. One-Piece CNC machined with high persision, resistance to recoil, exceptional at holding zero. Hard anodized surface starch and weather resistant, Anti-scratch. This perfectly concentric mount ensures a rock-solid platform for your rifle scope, boosting accuracy and precision. Rest assured, your scope is secure and won't budge under any conditions. This rifle scope mount fits Picatinny rails and accommodates both 30mm and 34mm scope tubes. Base Clamp Screws - 30 inlbs Ring Screws - 20 inlbs.

PRECISE COMPATIBILITY Designed exclusively for pre-2003 Savage 110, 111, 112, 114, and 116 long-action rifles with a flat-back rear receiver. Chambering must be for long-action cartridges such as .270 Win, .30-06, .300 Win Mag, and .25-06. Not for short-action calibers .223, .308, 6.5 Creedmoor, .243 or newer rounded-receiver models.. 0 MOA OPTIMIZED PLATFORM Features a 0 MOA Minute of Angle design, providing an ideal flat baseline for zeroing your scope. This is perfectly suited for most hunting and medium-range target shooting applications.. VERSATILE SECURE MOUNT The 7-inch length with 16 Picatinny slots offers ample flexibility for ring placement to achieve optimal eye relief. Constructed from high-strength 6061-T6 aluminum for a perfect balance of lightweight performance and rugged durability.. DIRECT EASY INSTALLATION Comes with all the necessary hardware to mount directly to your Savage rifle's receiver using the factory-drilled holes. No gunsmithing required for a secure and permanent fit.. LIFETIME GUARANTEE All WOSUWENGE optics mounting products are backed by a lifetime guarantee, ensuring your satisfaction and long-term reliability..

Lightweight Aluminum with Rigid Unibody Design Crafted from high-strength aircraft-grade aluminum and precision-engineered with strategic weight-saving cuts. The mount delivers sturdiness and portability, making it ideal for hunting. Recoil Lugs Hold Well Zero Recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely. Precision-concentric mount ensures rock-solid stability for enhanced accuracy. Offset Cantilever Mount Scope mount features a 2 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use. Scratch-Resistant Type III Hard Anodized Finish This finish puts a tough outer layer on your gear, making it harder and more resistant to scratches and dings. The beveled edge design on the ring prevents scratching of hands. Torx Screws Easy Accurate Mounting Stainless steel hardware ensures fast and secure tightening while protecting the screws from stripping. Includes 4 spare Torx screws for replacements. Max torque 18 inlbs rings screws, 30 inlbs base screws.

Savage Compatibility Fits Savage Axis, Axis II, and Edge rifles with factory drilled and tapped receivers.. Full-Length 16-Slot Platform Supports long-action optics and advanced mounting setups for versatile rifle builds.. Zero Retention Under Recoil Tight receiver engagement keeps optics locked even under heavy-caliber recoil.. 6061-T6 CNC Machining Ensures rigidity, precision, and flawless alignment across repeated shooting cycles.. Tactical Matte Finish Non-reflective, corrosion-resistant, and built for the elements..

Adjustable Bipod Leg By pushing button on each bipod leg, Twod Bipod can be folded together and moved into a horizontal rest position. Fast and secure adjustment mechanism does not wobble and allows for quick height adjustment.. Low Profile for Versatile Applications The unique internal spring system on the tactical bipod is both low profile and quiet. This extra low bipod features adjustment from 6.3''to 6.9''for complete stability.. Clever Two Mountings Rifle bipod features a universal design that offers a Picatinny mount and a bi-pod adapater for mounting on most rifle configuration.. Stabile Construction Picatinny Bipod feature solid anodized aircraft-grade aluminum construction with rubber feet and provides excellent stability and ensure a secure hold on most surfaces. Heavy duty and lightweight.. What you get 1 PC 6.3- 6.9 inch bipod for rifle Other tools you will need to make adjustments Limited lifetime warranty and friendly customer service..

PREMIER CHOICE - The Burris AR-P.E.P.R. Scope Mount is a perfect choice for shooters seeking an unparalleled combination of solidity and durability in a cantilever mount It ensures exceptional performance and reliability in various shooting scenarios. INNOVATIVE DESIGN - This mount combines both ring and base mounting This innovative design streamlines the installation process while ensuring maximum stability and alignment for mounted optics, enhancing overall shooting precision and consistency. SCOPE POSITIONING - With the capability to provide up to 2 inches of forward scope positioning, the P.E.P.R. mount delivers adequate clearance and optimal eye placement This feature promotes comfortable shooting ergonomics to maintain proper eye relief. VERSATILITY - Designed to accommodate various scope types and mounting preferences, the Burris P.E.P.R. Scope Mount includes both smooth Picatinny ring tops This versatile configuration ensures compatibility with a wide range of optics and accessories. BURRIS - Burris has built a reputation for some of the most solid, reliable rings, mounts, and bases on the market Our quality rings, mounts, and bases are vital to getting and staying on target, round after round.

Picatinny rail mount built specifically for Savage AxisAxis IIEdge rifle platforms with integrated level bubble. Comes with both 6 and 8 screws for compatibility with both older and newer Savage Axis models.. Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle. All Monstrum scope mounts and accessories come with a lifetime guarantee.

Dual ring scope mount for flat top Picatinny mounting platforms. 5.75 inches in length with 2 inches of forward extension allowing for extra flexibility for optimum eye relief and shooting position. Lightweight 6061 grade aluminum construction. Available in 1 inch, 30mm, or 34mm diameter versions. All Monstrum products are backed by a lifetime guarantee.

Single picatinny rail built specifically for Savage Axis, Axis II, and Edge platforms - not compatible with other models. Installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. Includes both 6 and 8 Screws for Compatibility across all generation Savage Axis Models.. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances. All Monstrum scope mounts and accessories come with a lifetime guarantee.

Monstrum Precision Picatinny Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. For 1 inch rifle scope tubes.. Picatinny Scope rings are compatible with Picatinny mounting platforms only. Not compatible with Weaver platforms. See Picatinny vs Weaver infographic before purchasing.. Available in four center heights to match your given needs 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch. Height is measured from the center of the rifle scope tube to the bottom plane of the mounting base.. Features an anti-recoil lug that slots seamlessly into Picatinny bases with zero wiggle, guaranteed to hold zero against the toughest of recoil.. All Monstrum products are backed by a lifetime guarantee.

Made from aircraft-grade 6061-T6 aluminum alloy with a matte black anodized finish to prevent scratches and blemishes.. Stainless steel mounting hardware tightens quickly and firmly maximum torque setting of 20 inlbs for base screws.. Scope base allows your scope rings to be mounted virtually anywhere along the base for a quick and easy mounting process.. Mounting Hardware 5 PCS 6-48 Screws, 5 PCS 8-40 Screws and wrench tool Included. The slot widths, depths, and spacing conform strictly to Picatinny specifications so you can mount any Picatinny rings or accessories to your Savage Axis, Axis II, or Edge rifle..

Please note that as of 92021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 92021 Serial numbers below N936371, purchase the Pre 92021 compatible mount. For models manufactured after 92021 Serial numbers above N936371, purchase the Post 92021 compatible mount.. Dedicated one piece dual ring scope mount built specifically for the Savage Arms AxisEdge platform. 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes. Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design. All Monstrum scope mounts and accessories come with a lifetime guarantee.

Products include 6pcs screws and 1pc hexagonal wrenches.. 11 slots Picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions.. Aluminum Alloy Material,Only 1.76ounces in weight,it has durability and high strength while maintaining light weight.. Picatinny rail fits for Marlin 336, Marlin 30-30, marlin 1895 45-70, Marlin 1894, Marlin 30AS, Marlin 30AW, Marlin Camp 9, Marlin Camp 45, Marlin 1894C 357, Western Field 740, etc.. All screws and an allen wrench provided,you are very convenient to install at any time.Offer unconditional return and exchange service..

Solid High Picatinny Scope Rings 1 inch scope rings position the center of the scope tube at a height of 1.5 Inches from the base. 1 inch diameter scope rings are compatible with Picatinny rails and more. Lightweight See-Through Solid Scope Mounts Made of aircraft-grade 6061-T6 aluminum alloy with a black anodized finish, sturdy and lightweight. The see-through design is very lightweight and provides potential visibility. Optics Rings with Tape Protection The tape prevents the scope from being scratched and prevents the scope from moving forward due to recoil. Easy and Precise Mounting scope rings with 1 rail clamp screw and 2 scope clamp screws, quick and easy to install. Precision and repeatable alignment. Ideal 1 CVLIFE Scope Mounts The package includes two riflescope rings and a wrench. Each ring weighs 1.3 oz. Compatible accessoies for Airsoft, 1022, Rimfire, .22 Pellets, .22lr, .177, .17 hmr.

Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles. Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.

Dedicated picatinny rail mount built specifically for Savage Axis rifle platform - 1 inch longer than standard version, allowing for more flexible placement of your optic. Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. Comes with both 6 and 8 screws for compatibility with both older and newer Savage Axis models. Compatible with Savage Axis, Axis 2, and Edge rifle models.. Extended version is 8 inches in length with 19 rail slots versus7 inches or 16 rail slots for the standard version. All Monstrum scope mounts and accessories come with a lifetime guarantee.

High-quality 30mm diameter tube mount for secure scope attachment.. 1.5-inch height for optimal eye relief and comfort.. Durable 6061 aluminum construction for reliable performance.. Cant design enhances scope positioning and stability.. Easy to install, making it ideal for versatile shooting applications..

Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA.

Fits Savage Round Back Short Action Rifles Designed specifically to fit Savage rifles with a round back short action receiver for a secure, precise fit.. 0 MOA Elevation Ideal for shooting at distances up to 500 yards with no additional elevation built in.. One-Piece Picatinny Rail Full-length MIL-STD 1913 cross slots offer flexible mounting options for scopes, rings, and accessories.. Durable 6061-T6 Aluminum CNC-machined from high-grade 6061-T6 aluminum for strength and lightweight performance.. Matte Black Finish Type II anodized for a sleek, corrosion-resistant, professional appearance.. Lightweight Low Profile Engineered to keep weight down and maintain a low sightline while ensuring maximum rigidity.. Mounting Hardware Included Comes with screws and T-10 Torx bit recommended torque is 20 inlbs with a drop of blue thread lock sold separately.. Compatible with Picatinny Weaver Rings Works with both ring types for maximum versatility in optics mounting.. Made in the USA Proudly manufactured, finished, and packaged entirely in the United States with strict quality control..

Made to the legendary Weaver cross-lock design. Constructed of rugged, lightweight 6061-T6 aluminium.

Precision Fit for Savage Axis I II Post-June 2021 Specifically designed for newer models with 8-40 threaded receivers, ensuring seamless installation.. High-Strength Aluminum Construction Durable yet lightweight, preserving rifle balance while withstanding recoil and environmental stress.. Multi-Slot Design Allows for precise optic positioning, improving flexibility in mounting scopes with different eye relief requirements.. Picatinny Weaver Compatibility Works with a variety of scope rings and tactical accessories, expanding customization options.. Matte Black Anodized Finish Corrosion-resistant and scratch-resistant coating for long-lasting performance in any shooting conditions..

GOTICAL 2-PC Each 21.2 Inch Savage 70459 Rascal Scope Mount Base Kit Rail Hard Anodized Aluminum w Matte Black Finished. Precision Machined From Aircraft Grade Aluminum Alloy With Hard Anodizing With Matte Black Finish. The scope mount set is designed for the Savage Rascal bolt-action rimfire rifle.. The two-piece set is installed onto the receiver to allow the user to mount their favorite scope to the rifle.. Unique Contoured Bottom Designed To Fits On Savage Rascal Pre-Drilled And Tapped Rifle Receiver. Accessory Attachment Type Picatinny Rail,M1913 Rail.. 5 pieces 6-48 20-inch lbs of torque screws and wrench included..

Savage EdgeAxisAxis 2 Picatinny Rail Scope Mount 20 MOA.

Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA. 6-48 Screws and T-10 Driver Included. Will not fit Savage Ultralite models.

Savage EdgeAxisAxis 2 Picatinny Rail Scope Mount 0 MOA.

Savage 93 1-58 Ejection Port Picatinny Rail Scope Mount 20 MOA.

Savage Mark II 1-38 Ejection Port Picatinny Rail Scope Mount 20 MOA.

Savage Flat Back Long Action Picatinny Scope Mount 0 MOA.

Fits Savage 93 with 15-8 Ejection Port Designed specifically for Savage 93 rifles with 15-8 ejection port for a secure and precise fit.. 0 MOA Elevation Perfect for short to mid-range shooting 0500 yards with no added elevation built in.. One-Piece Picatinny Rail Full-length MIL-STD 1913 cross slots provide flexibility for mounting scopes, rings, and accessories.. CNC Machined 6061-T6 Aluminum Made from premium 6061-T6 aluminum for strength and durability while keeping weight low.. Matte Black Anodized Finish Type II anodized for a sleek, corrosion-resistant, and professional appearance.. Lightweight Low Profile Weighs just 2 oz, with a height of 0.4 and length of 5.575, maintaining a compact and sturdy design.. Mounting Hardware Included Comes with 6-48 screws and T-10 Torx bit recommended torque is 20 inlbs with a drop of blue thread lock sold separately.. Picatinny Weaver Compatible Compatible with both Picatinny and Weaver-style rings for maximum versatility.. Made in the USA Proudly machined, finished, and packaged in the United States to the highest standards..

MATERIAL Durable Aluminum Construction Made from lightweight yet sturdy aluminum material.. MOUNTING The GOTICAL one piece system is the fastest way to mount optics on your CVA muzzleloader. It is molded from Z2 aluminum alloy to ensures better ring alignment.. IDEAL FOR Rail Scope Mount CVA Accura Optima is Ideal for Hunting , Great for spotting game while standing or walking.. SIZE WEIGHT It has Compact Size. Measures just 3.84 inches long and weighs only 3.84 ounces.. NIGHT VISION GOTICAL Rail Scope Mount CVA Accura Optima Does not Have night vision capabilities..

Fits multiple short action models including Savage 10, 11, 12, 14, 16, and the new Savage 110 Short Action, as well as newer Savage SA models with a round back top receiver.. Designed for Savage Short Action Rifles Designed specifically to fit Savage rifles with a round back long action receiver for a secure, precise fit.. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.. Mounting Hardware Included Comes with 5 pcs 6-48 x 14 screws ,5 pcs 8-40 screws and two pieces wrenched. Torque is 20 inlbs. With 0 MOA Elevation Ideal for shooting at distances up to 500 yards. Crafted from lightweight 6061 grade aluminum. All optics mounting products come with a lifetime guarantee,.

Crafted from lightweight 6061 grade aluminum. All optics mounting products come with a lifetime guarantee. Designed for Savage 110 Round Back Long Action Rifles Designed specifically to fit Savage rifles with a round back long action receiver for a secure, precise fit.. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.. Mounting Hardware Included Comes with 5 pcs 6-48 x 14 screws ,5 pcs 8-40 screws and two pieces wrenched. Torque is 20 inlbs. With 0 MOA Elevation Ideal for shooting at distances up to 500 yards..

Made from aircraft-grade 6061-T6 aluminum alloy with a matte black anodized finish to prevent scratches and blemishes.. Stainless steel mounting hardware tightens quickly and firmly maximum torque setting of 20 inlbs for base screws.. Scope base allows your scope rings to be mounted virtually anywhere along the base for a quick and easy mounting process.. Mounting Hardware 5 PCS 6-48 Screws, 5 PCS 8-40 Screws and wrench tool Included. The slot widths, depths, and spacing conform strictly to Picatinny specifications so you can mount any Picatinny rings or accessories to your Savage Axis, Axis II, or Edge rifle..

Top Rail allow installation of scope, sight, torch, laser. Top Rail allow installation of scope, sight, torch, laser. Constructed of metal material, extra strong shock. Perfect for hunting, airsoft, war game. Easy to install , Fit on 21mm Rail. Absorption ability. Adjustable two-pieces design for rifle tube could adjust the compatible diameter range from 0.66 inch to 1.18 inch.. Adjustable two-pieces design for rifle tube could adjust the compatible diameter range from 0.66 inch to 1.18 inch..

Made from aircraft-grade 6061-T6 aluminum alloy with a matte black anodized finish to prevent scratches and blemishes. The Savage Rascal picatinny scope rail is made specifically for the Savage Rascal.. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Stainless steel mounting hardware tightens quickly and firmly maximum torque setting of 20 inlbs for base screws.. The 4x30 compact scope is made of aluminum with a standard black matte finish. Shockproof 1200G Recoil Tested Waterproof IP67 can be waterproof up to 30cm in depth Includes 20mm aluminum scope mount, flip up lens cap, mounting wrench, and instructions Recommended for airsoft and tactical enthusiasts and collectors alike. AO Type Short Scope GOTICAL scope is only 6.5 inches 16.5 cm, weighs 1.8 lbs 0.3 kg, super compact. The 4x30AO scope sight allows for parallax adjustment to focus on the objective lens. 4x x fixed magnification 30mm tube diameter aluminum For airsoft and hunting. Adjustable between 5 levels of wind loss and altitude reticle Left and right adjustment click value of 12 MOA left and right stroke 30 MOA 5 levels of red-green reticle can be adjusted to 5 levels. -3, 2 vision adjustable Versatile designed with both short and medium to long range shots in mind. Green Multicoated Lens Scope Sight Adopting the latest Broadband Green Film optical technology, green multi-coated lenses greatly improve both clarity and accuracy. Set Contents 1 x 4 x 30AO rifle scope, 2 x butler cap lens cover, 0.8 inch 20 mm mounting fixed picatinny rail ring, ring mounting hex wrench, cleaning cloth, scope instruction manual English language not guaranteed. Gotical scope comes with one year warranty..

Marlin Tactical Scope Pre-Drilled Mounting Kit. Marlin Tactical Scope Pre-Drilled Mounting Kit. Weaver Picatinny Sight Rail Bracket 9mm. Heavy duty sight rings for attaching sights. Sights, optics, flashlights, scope ring.

Model 171338 - BackCountry Cross-Slot Base Savage 110AXIS Round Rcvr LA with a Matte finish. Fits both Picatinny and Weaver-style rings. Machined from lightweight, 7075-T6 aircraft-grade aluminum. Available with zero elevation or 20-MOA for long-range shooting.

Model 181336 - Rifleman Savage 110Axis with a Matte finish.

No Lapping Required. Machined from a solid block of 6061T6 aluminum. Totally American made and packaged. Up to 4-times more thread length-a full 12 inch.

PROPRIETARY STEEL ALLOY - The mount is constructed from a proprietary steel alloy that strikes a balance between strength and ductility This combination allows the rings to securely conform around a gun scope without causing damage during installation. CONSTRUCTION - This SIG SAUER scope mount utilizes 7075-T6 aluminum for rugged durability Its steel rings feature an epoxy powder coating that prevents oxidation, ensures resistance to gun oils, cleaning solutions, and exposure to outdoor elements. STEEL 1913 STYLE CLAMPS - This shooting scope ring mount features an M1913 attachment type, known as a Picatinny rail attachment It provides a secure and stable attachment, and the standardized mounting system ensures versatility and compatibility. TORQ SPECIFICATIONS - This SIG SAUER mount comes with specific torq specifications for proper installation To rail 12in Nut requires 65 inlbs, and to scope T15-TORX necessitates 25 inlbs These specifications contribute to the secure and reliable installation. DETAILS - The SIG SAUER Alpha MSR Mounts offer versatility with 30 and 34 mm ring size options that allows shooters to choose the appropriate one for their gun scope These mounts are designed with a height of 1.535 inches and the 0 MOA cant ensures a flat alignment for enhancing accuracy and precision Available in black and coyote brown colors.

Color Black. Gun Model AR-15. Tube Diameter 34 mm. FabricMaterial Aircraft Aluminum. Cant 20 MOA.

Precision Material Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy durable.. Convert 11 mm Dovetail to 21 mm Picatinny Rail 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement.. Mount Base Fit 11 mm dovetail mounts, Base mount 38 to 78 converter adapter. Low profile 0.59 riser rail for scope.. Top With 9 Slots Style Rail Top 21mm picatinny rail allows for the mounting of picatinny standard scopes, red dots or other accessories.. Easy To Install Rail adaptor installs easily via dovetail mount and one vertical stop pin, attached allen wrench can help you to tight stable and no shaking..

Double 1'' scope ring mount for Picatinny Weaver Rail 21mm.. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.. The ring is for most scopes which are in 1'' 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. Item height 2.1''. With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..

The Game Reaper Series from DNZ Products is a one-piece scope mount system custom made to fit each type of firearm and align perfectly with your rifles receiver. Each Ring and Base is machined from a solid block of top-grade billet 6061T6 aluminum and has up to 4x more thread for absolute strength and security a full 12 inch. Simple easy to install. No lapping required. Proudly Made Packaged in the USA. Included components Game Reaper 2-Piece Scope Mount, Mounting Hardware Kit.

Model 171100 - BackCountry Riflescope Mount Savage 10110 Round Rcvr 1 Medium with a Matte finish. One-piece design makes installation straightforward and simple. Machined from a single piece of lightweight, 7075-T6 aircraft-grade aluminum. Includes all mounting screws.

Please note that as of 92021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 92021 Serial numbers below N936371, purchase the old Pre 92021 compatible mount. For models manufactured after 92021 Serial numbers above N936371, purchase the new Post 92021 compatible mount.. Picatinny rail mount built specifically for Savage AxisAxis IIEdge rifle platforms. Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics. Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances. All Monstrum scope mounts and accessories come with a lifetime guarantee.

Country Of Origin United States. Product Type Sporting Goods. Item Package Dimensions 1.4 L X 8.6 W X 17.2 H Cm. Item Package Weight 0.295 Kilograms. Rails Feature Self Centering Black Zinc Coated Hardware For Precise Alignment To Your Receiver And Corrosion Resistance.