designed to connect a 12 Gbps host bus adapter or RAID controller with SFF-8643 to 4 discrete SATA drives Mini SAS HD to SATA adapter cable provides reliable internal connectivity between a high density RAID controller card and direct attached storage devices with a SATA plug.. 36 pin SFF 8643 connector and 4 x 7 pin SATA connectors provides both 3 Gbps and 6 Gbps compatibility while migrating to a to 12 Gbps storage area network system. HD mini SAS breakout cable designed with acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration.. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. A lifetime warranty is included with this Mini-SAS cable for peace of mind when purchasing..

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector. Leverage hardware raid performance with this SATA multi-lane cable Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters Supports up to 6Gbs data transfer rate per drive. DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management Slim ribbon cables minimize airflow impact in a computer case. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

Please note that this Mini SAS SFF-8643 to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. SFF-8643 the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. Cable Length 3.3ft1M.

Up to 6 GbpsSATA 22Pin Male to Female adapter, Use to protect your original port of 2.5 HDD, 2.5SSD, 3.5HDD from damage. TipsPlease note this is SATA to SATA cable, NOT SAS to SATA Adapter SATA 22pin which 15Pin for power, 7 Pin for data transfer. Kindly Reminder Compatible with 2.53.5HDD some of the 1.8SSD, CD DVDBlu-ray drives. Please note the size. Durable SATA 22 Pin AdapterPVC Molded, Gold plated SATA copper pin contact, please supply power when you use hard disk. Low Profile DesignLow profile design easy to use, great for you. Screw-holes?for?securing?adapter. What You Get1 x CableCreation SATA 22 Pin Male to Female Adapter. CableCreation offers 24 Months Warranty for all products and lifetime Technology Support.

QUICKLY ACCESS TO 2.5 SSDHDD Hard drive adapter supports drive with the standard SATA connector, Connect a 2.5 SATA hard drive to your computer for add storage, create disk images, transferring files on HDDSSD and Add drive space to upgrade your laptop, and have a chance to keep old HDD as an external memory. Not support 3.5'' SSD HDD. FAST TRANSFER SPEEDS UP TO 6GBPS WITH UASP The USB to SATA adapter supports USB 3.0 data transfer speeds of 6Gbps, 70 faster than conventional USB 3.0 when connected to a computer that also supports UASP, Reverse compatible with USB 2.0 USB 1.1. EASY TO USE SATA to USB 3.0 adapter Hot-swappable, plug play, no drivers needed. for a 2.5 drive no need for an additional power supply, An LED light indicates Power and Activity status. The cable length is only about 8 inches, which is good enough for cloning a laptop hard disk drive to an SSD. WIDE COMPATIBLITYCompatible with USB 3.0 computer systems such as Dell Optiplex Apple Mac MacBook and 2.5in SATA hard drives solid-state drives such as Samsung 840 EVO series Crucial MX 100 series. System requirementsWindows XPVista788.110, MAC OS X, Linux. Power Supply For 2.5-inch drives, power is usually supplied via the USB connection, Their compact size makes USB to SATA cables portable and convenient for technicians and users who need to work with multiple drives or perform data recovery tasks. Interface Bridging USB to SATA cables connect SATA storage devices like hard drives and solid-state drives to a computer's USB port, effectively bridging the gap between SATA and USB interfaces. Integrated Features USB 3.0 to 2.5 SATA III Hard Drive Adapter comes with LED indicators to display power and data transfer statuses for faster performance with compatible devices.. Friendly and easy-to-reach customer service to solve your problems timely.

SATA SAS cable. Serial ATA 150300600. 4-Lane. SATA R to 36 pin 4i Mini MultiLane P. 3.3 ft.

High compatibilityConnect your SATA IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Compatible read up to three hard drives simultaneously.. Intelligent BackupOne Touch Backup OTB Function. Design for people who need to backup data from your computer to portable hard drive. Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux. Convenient to useHard Drive Adapter Plug and Play, Hot-swappable, no driver needed. OnOff Switch design for HDD protection. Led light shows power and activity status.. Simultaneous useSupport 2 IDE and 1 SATA hard drives connecting simultaneously Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive. High-speed transmissionSuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected.

USB to IDE SATA Adapter for Data Recovery Hard drive reader supports 2.5 3.5 SATA IDE hard drives DVDCD Optical Drive, Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. You can quickly transfer and back up large files of data from your hard drive. USB 3.0 5Gbps Super Speed hard drive adapter Data transfer rates up to 5 Gbps, fast enough to transfer a movie in seconds, backward compatible with USB 2.01.1. supports UASP. which is 70 Faster than traditional USB 3.0 and a 40 reduction in required processor resources. 6TB Huge Capacity Supportive The hard drive adapter supports 2.53.5 SATA and IDE hard drives with one SATA III connector and two IDE connectors and we provide a 4pin power cable for 3.5 inch IDE drives, supporting up to 6TB of hard disk capacity, Tips For old IDE drives set the master disk and the slave disk. Stable Power Supply Includes a 12V2A power adapter to ensure stable power for 3.5 IDE drives and larger SATA devices. our ide sata to usb adapter with reliable performance for your data recovery needs, Plug and play Hot Swap OnOff Switch for HDD protection. LED light shows power and activity status. Wide System Compatibility external hard drive reader support hot-swapping. universally compatible with Windows 10 8.1 8 7VistaXP, Mac OS 9 10, Linux work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc Please Note Before purchasing, please verify the brand and model of the hard disk.

Universal Hard Drive ReaderSATA and IDE to USB 3.0 adapter supports 2.53.5 HDDSSD, 2.53.5 IDE, 5.25 DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW optical drive. With dual-head IDE connector 40pin and 44pin plus one SATA III connector, it allows you to connect three hard disk drives simultaneously. 5Gbps High Speed TransferThis IDE to SATA Hard Drive adapter is designed with a USB 3.0 port that supports high-speed, enabling data transfer rates of up to 5Gbps. Data transfer process is exceptionally simple and effortless. Additionally, our ultra recovery converter maintains backward compatibility with USB 2.0 USB 1.1. Humanized designThis ide hard drive converter adopts a 2-IN-1 USBUSB-C portdesigned, USB to USB-C adapter that plugs into the USB port to match your laptop and is not limited by the computer model. It also supports hot swapping, allowing you to connect or disconnect drives without having to restart your computer. Onoff switch for HDD protection and the LED light indicates power and activity status. Stable Power Supply Our USB 3.0 to IDE SATA adapter comes with a 12V2A power adapter, for 3.5 IDE drivers and old SATA HDD, you need to connect this power adapter and 4-pin power cable for a better connection. If you want to use old IDE hard drive, please set a jumper and set it to slave The actual transmission speed depends on the Settings of the connected device.. What You Will GetPackage included Hard driver reader1, 4-pin power cable1, 12V2A power adapter1, USB CUSB 2-In-1 cable1, manual1TipsThis IDE to USB adapter default master is a 2.5 IDE hard drive, if your hard drive is new, please go to Disk Management to initialize it first so that the hard drive can be recognized.

Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector.. Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1.. Included 12V 2A power cable is for providing stable electricity supply. Note 4PIN Power Cable is designed for 3.5 IDE drive, SATA drives are not applicable and unnecessary.. Plug and play Hot Swap One Touch Backup function OnOff Switch for HDD protection. LED light shows power and activity status.. Note Please download the OTB software to use the One Click Backup feature, and check the network manual for details if necessary.. What we offer USB 3.0 to IDESATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, 24h customer email support..

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector. Leverage hardware raid performance with this SATA multi-lane cable Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters Supports up to 6Gbs data transfer rate per drive. DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management Slim ribbon cables minimize airflow impact in a computer case. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

Mini SAS 36 SFF-8087 Male Is to Connect the Controller, 4x SATA Is to Connect to the backplane. Mini SAS 36 SFF-8087 Male is Host, 4 x SATA female is target. Mini SAS 36 SFF-8087 connect to the Controller, 4 Sata connect to 4 HDD. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. Cable Length 1.6FT.

6GBs bandwidth. Drain wire tinned copper, 30 AWG. Latching SATA connector eliminate accidental disconnection. Tape aluminum Mylar hot-melt Mylar. It offers auto hardware direction control surge protection for rs-485 interface.

Using professional SAS wire, 0.5 m cable length.. SAS SATA hard disk will be converted directly connected to the motherboard SATA port, ordinary board can also enjoy direct high-speed SAS hard drives.. SATA supports up to 6GB SATA3 mode.. Please check before buying whether to support SATA hard disk manual mode, not all SAS hard drives can be used.. This product generally has 2 usages 1. Separate the data and power supply of the SATA hard disk interface, connect the motherboard SATA interface and the power cord, which can be directly connected. Before using the SATA motherboard, some motherboards must be set to the AHCI mode optional RAID mode for RAID.. 2. Separate the data of the SAS hard disk interface from the power supply, connect the motherboard SAS interface SFF-8482 and the power cord, which can be directly connected.. This product cannot be used to connect a SAS hard disk to the SATA port of a normal motherboard.. If a SAS hard disk is to be used on a normal SATA motherboard, the hard disk must have the SATA logo the SATA interface on the motherboard clearly marked SAS to indicate that the motherboard supports SAS.

Your computer motherboard must be a server motherboard, It must support SAS, if not, please do not buy it. You can see the second picture.. Your SAS hard disk drive must support the SATA interface, you can see the third picture.. It can be used for SAS hard drives to SAS motherboards, but it is not possible to use home motherboards for SAS hard drives,It has no chip conversion function.. It is only used to convert your SAS hard drive interface to a SATA interface and then to connect your SAS computer motherboard,SAS drives are backward compatible, Usually SAS supports SAS and SATA interfaces.. Attention , when you buy it, your computer motherboard must support SAS motherboards, which are server motherboards..

SATA SAS cable. Serial ATA 150300600. 4-Lane. SATA R to 36 pin 4i Mini MultiLane P. 1.6 ft.