Connector SMA male Cable Length 15FT Impedance 50 Ohm. Cable Type RG316 Coaxial Cable,made of pure copper inner, flexible and low loss, good transmission performance.. This Low Loss sma male to sma male coaxial cable allows transfer of signals over large distances, supports higher frequency use and minimum signal loss.. This rf sma male coaxial cable uses the black heat shrink tube and lined adhesive by heat shrinking to connect the adapter and the coaxial cable. All the connections are solid and attached professionally which could prevent the connector coming off from the cable easily.. Used to connect SMA female adapter or SMA device. Used for the Network system, ADS-B receiver, Wifi router, Radio transmitters, Signal booster, WLAN Wifi antenna, 3G 4G LTE Antenna, GPS antenna and etc..

Connector SMA male Cable Length 12FT Impedance 50 Ohm. Cable Type RG316 Coaxial Cable,made of pure copper inner, flexible and low loss, good transmission performance.. This Low Loss sma male to sma male coaxial cable allows transfer of signals over large distances, supports higher frequency use and minimum signal loss.. This rf sma male coaxial cable uses the black heat shrink tube and lined adhesive by heat shrinking to connect the adapter and the coaxial cable. All the connections are solid and attached professionally which could prevent the connector coming off from the cable easily.. Used to connect SMA female adapter or SMA device. Used for the Network system, ADS-B receiver, Wifi router, Radio transmitters, Signal booster, WLAN Wifi antenna, 3G 4G LTE Antenna, GPS antenna and etc..

Our SMA to BNC adapter connectors are built to precise RF specifications, SMA to BNC SDR adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 3GHz. Different BNC SMA Coax Connector gender versions are possible in this product line. SMA to BNC Scanner adapters are constructed in female to female, female to male, male to female or male to male gender varieties. it can connects a BNC antenna to SMA radio. SMA to BNC kits 50 ohm Walkie Talkie Adapters work for handheld HAM radio,TinySA spectrum analyzer, HTs and SDR dongles,Baofeng Wouxun Two-way Radio, scanners, Radioddity GD-77, Kenwood TH-F6A, Yaesu FT-70DR and so on. Provides you with a reliable and secure SMA to BNC connection,work for Antennas, CCTV, digital communication systems, HAM radios, gmrs radio,microwave applications, RF applications, wireless LAN devices, and more. Package Content 4 x BNC to SMA Radio Adapter BNC Female to SMA Female BNC Male to SMA Female BNC Male to SMA Male BNC Female to SMA Male .

Wide 70MHz6GHz Dual-Channel SDR CoverageOffers a broad 70MHz6GHz frequency range with true 2TX2RX operation. Powered by the AD9363 RF chip software-upgradeable to AD9361AD9364, ideal for wireless communication development, RF testing, and advanced signal analysis.. Fast Gigabit Ethernet Flexible Micro SD BootBuilt-in Gigabit Ethernet ensures high-speed data transmission for real-time SDR applications. Supports Micro SD boot for loading alternative firmware, data logging, and system expansionperfect for both laboratory and field applications.. Xilinx Zynq-7010 FPGA for Real-Time ProcessingEquipped with Zynq-7010 SoC, 512MB DDR3, and 32MB Flash, enabling advanced DSP algorithms, baseband processing, and custom FPGA logic development with excellent stability and performance.. High-Precision 40MHz 0.5ppm VCTCXO External Ref InputFeatures an ultra-stable 40MHz 0.5ppm VCTCXO and IPEX external reference clock input. The onboard clock can be finely tuned via adjustable resistor for enhanced signal accuracy and synchronization with professional-grade equipment.. Open-Source, Developer-Friendly RF PlatformFully open-source design with DFU recovery mode, PTT key interface, USB OTG, and comprehensive technical documentation. A powerful SDR platform for researchers, engineers, educators, and RF hobbyists building custom wireless systems..

SAWbird GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites. The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest. The amplifier can be powered in 3 ways via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to DC connector adapter. Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 available on Amazon, item ID B06Y1GN5RP. Includes male SMA to male SMA adapter and USB to DC barrel connector adapter.

16PCS Universal Radio Adapter Toolkit Specially curated for RTL-SDR dongles NooElec, RTL-SDR Blog, HackRF, amateur Ham radios Baofeng UV-5R, Kenwood, Yaesu, NanoVNATinySA antenna analyzers, lightning arrestors, and laboratory setups. This kit eliminates connection headaches, letting you bridge handheld gear to heavy outdoor antennas instantly.. 4PCS SMA to PL259SO239 Adapters Perfect for connecting Handheld Radios or GMRS setups to Car Mag-Mount antennas and HFVHF ham base stations. This essential sma to pl259 adapter series delivers rock-solid thread coupling to handle heavy outdoor feeder lines.. 4PCS SMA to BNC Adapters A must-have for Radio Scanners Uniden, Whistler and RF test equipment. Instantly adapts oscilloscopes and signal generators to modern SMA ports. Ideal for quick-disconnect HT antennas and rapid bench testing.. 4PCS SMA to N-Type Adapters Ideal for cell phone signal boosters WeBoost, SureCall, LoRaWAN gateways Helium Miner, RAK, and Meshtastic nodes. Seamlessly connects heavy-duty, low-loss LMR400 or outdoor N-type antennas to your compact SMA devices.. 4PCS SMA to 75 F-Type Adapters Perfect for cross-impedance bridging from 50 radio receivers to 75 TV coax RG6 or satellite cables. Ideal for RTL-SDR enthusiasts setting up custom HD antennas for ADS-B FlightAware flight tracking or FM listening..

Frequency Range 1090Mhz Features Magnetic BaseAntenna length 30cmCable Length 1.5MPolarization Type VerticalVSWR 1.5Rated Power 50WCable Type RG174. Gain6dBicolorblackStructure TypeHalf-Wave Dipole Omnidirectional AntennaConnectorSMA Male.Impedance 50 ohm.. Package1 x 6dbi 1090Mhz Antenna. Compatible with this Kaunosta ADS-B Antenna Compatible with SDR,ADS-B,Drone FPV,Raspberry Pi,Real-time aircraft track,Airport monitor,Wireless Networks,Remote Control,Wireless Transmission,Telematics Tracking,Wireless Surveillance.Compatible with FlightRadar24,flighAware pro plus, rpi3,sir radio,FlightAware usb module,flightaware pro dongle,computer.. Compatible withRaspberry Pi,Personal Weather Stations,Home Security Systems,Smart Meter Communication,Health Monitoring Devices,Public Safety Communications.RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner..

Type SMA Male to Male Cable RG316 Coaxial Cable Cable Length 6 inch Connector type SMA Male to Male Connector 1000 Times Mating Life Time Impedance 50 ohmnot for TV. The short sma jumper cable length makes this an excellent solution for close-range connections and portable applications to your rf Antennas.. Application this sma patch cable is good for antennas, antenna analyzer, USB tuner, rtl sdr dongle, LTE hotspot, ham radio, HT to vswr meter, wireless LNA module, Gateway, Wi-Fi Radios external antenna etc.. Package list 5 x SMA Male Cable Jumper. Never worry about any security problems. We are confident in the quality of our sma male extension cable and willing to provide 1 MONTHS Replacement Warranty and 100 Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..

The high-quality Ham It Up Plus v2 is an addon for your RTL-SDR or other radio that will allow you to extend the frequency capability all the way down to 300Hz. It is built like a tank in the USA and Canada and drastically outperforms every single similar device in its price class--and even devices far costlier. Ham It Up Plus v2 will provide a substantial, noticeable performance increase for low frequencies 300Hz to 65MHz in upconvert mode with nearly every low cost radio and RTL-SDR in existence, whether they implement direct sampling circuits or built-in 'upconverter'-like circuitry. Like Ham It Up v1, the Ham It Up can be placed in bypass mode with an on-board physical switch to access the higher bands of your radio without removing the Ham It Up from your signal chain. Designed to be powered through the onboard microUSB port, whether from a PC or a wall adapter. For simplicity, Ham It Up Plus v2 does not require USB data or configuration, so it will not enumerate as a USB device when plugged into a computer. Easy installation and compatibility with popular software defined radio SDR models. Ham It Up Plus v2 has a local oscillator frequency of 125MHz. This means it will shift frequencies higher by 125MHz when in upconvert mode, so will work with any radio which can receive between 125MHz-190MHz, including transmitters and transceivers. A built-in, HF-suitable low noise amplifier LNA circuit is included. This LNA can be bypassed with a physical switch for installations where an LNA is not required or a remote LNA placed close to a remote antenna is preferred. Designed for professional and amateur radio operators, astronomy enthusiasts, wireless communication enthusiasts, and more. A free male SMA to male SMA connector and male SMA to female BNC connector are included in your purchase. Backed by a generous 2-year warranty for peace of mind.

Connector SMA Male Right Angle 50 Ohm Connector Connector SMA Female Bulkhead Mount 50 Ohm Connector Cable RG316 Coaxial Cable Length 1 feet 30cm 12 inch. Package List 2 x Cable As the Picture Shown. Compatible with 4G LTE Mobile Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular, 4G LTE Cellular Trail Camera, Game Camera, Outdoor Security Camera, Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal. Compatible with WiFi Router, USB Adapter, Wireless AP Hotspot, WiFi Signal Wireless Mini PCI Express PCIE Network Card, IP Security Camera, Wireless Video Surveillance Monitoring, FPV Drone Controller, FPV Camera Wireless Backup Camera, Rear View Camera. Compatible with RTL-SDR USB Dongle, ADS-B Receiver, Ham Radio, Amateur Radio, GPS Navigation Antenna Extension Cable. Note - The connector it is SMA , NOT F type, not fit TV's and TV Antennas.

Cutting-Edge SDR Technology Integrated DSP architecture delivers clear demodulation for CW, AM, SSB, FM modes, supported by a 192kHz wideband spectrum display.. Crystal-Clear Display Features a 4.3-inch IPS touchscreen with 800x480 resolution, offering vivid real-time spectrum and waterfall visualization.. Durable Portable Design Encased in a premium aluminum alloy shell, the receiver is lightweight and compact, ensuring durability and easy portability.. Rechargeable Long-Life Battery Equipped with a 5000mAh lithium-ion battery for up to 12 hours of uninterrupted operation, perfect for fieldwork or travel.. Wide Frequency Coverage Covers a full spectrum from 100KHz to 149MHz with precision tuning down to 1Hz, ensuring compatibility with multiple radio modes.. Enhanced Usability Includes intuitive touch controls, rotary encoder, and storage for 99 custom channel presets with editable station names.. Versatile Audio Options Supports 3.5mm headphones CTIA standard and has a built-in 3W speaker for crisp audio playback..

Wide Frequency Coverage Supports 978Mhz-1090Mhz band, perfectly compatible with ADSB flight tracking and SDR signal reception projects. High Gain Performance 6dBi signal gain enhances reception sensitivity, helps capture stable signals for DIY radio experiments and hobby use. Standard Interface SMA male connector ensures easy connection with most SDR receivers, RTL-SDR devices and radio DIY equipment. Compact Design 7.74inch 19.66cm length, lightweight and portable, convenient for desktop setup or outdoor temporary installation. Durable Construction Premium material resists daily wear and tear, designed for long-term use in tech DIY projects and hobby applications. Package Includes2 x Kaunosta 1090Mhz ADSB Antenna.

FLEX - the next generation HDHomeRun CONNECT DUO. Watch live TV on multiple devices simultaneously throughout your home with our Multi room Multi user network tuner solution. All the features of the HDHomeRun CONNECT DUO plus optional DVR by connecting a USB hard drive requires paid TV guide for DVR record. Compatible with XBox Roku-Ultra AppleTV iPhone iPad Win1011 Mac Android FireTV Sony and LG devices. 2 tuners ATSC 1.0.

Connector SMA Male 50 Ohm Connector Connector SMA Male 50 Ohm Connector Cable RG316 Coaxial Cable. Length 15cm 6 inch. Compatible with LNA Low Noise, RTL-SDR USB Dongle, ADS-B Receiver, Ham Radio and Amateur Radio. Compatible with Test Probe Coaxial Jumper Cable for Handheld RF Explorer, SWR Meter, VNA Vector Network Analyzer, Antenna Analyzer, Spectrum Analyzer, RF Signal Generator. Package List 2 x Cable As the Picture Shown. Note - The connector it is SMA , NOT F type, not fit TV's and TV Antennas.

Extend the frequency of your RTL-SDR, Software Defined Radio SDR or other radio up to 3.1GHz 3100MHz with ease Efficiently downconverts signals from 1.55GHz to 3.1GHz with minimal insertion loss. Compatible with nearly all software-defined radio devices such as our NESDR series of RTL-SDRs and the HackRF. Operates in both transmit and receive modes if available on your SDR. Incorporates an ultra-precise 1PPM TCXO to provide the 1.5GHz LO frequency for precise downconversion. Very low noise figure for exceptional signal quality. Can be powered by bias tee with a wide input voltage range of 4V to 5.5V. Internal RF, IF, and LO filters for optimized performance. Full 2 year product warranty directly through Nooelec.

Ham It Up Nano is a highly portable HF upconverter for radios and software defined radio devices like our NESDR series RTL-SDR and the HackRF. Wide frequency capability of 100kHz-65MHz, 1PPM accuracy, and bias-tee powerable. Small, light-weight module--just 2.0 x 1.2 x 0.75 50 x 30 x 18mm and 1.6oz 45g.

A very small 91 balun meant for attaching long wire and dipole HF antennas to your HF capable SDR, radio or Ham It Up upconverter. Assembled into a custom aluminum enclosure and includes 3 antenna connector adapters and a male SMA to male SMA barrel connector. At 38mm x 25.0mm in total size, this balun is a bit larger than our popular Balun One Nine v1, but also has better HF performance and can be used to even lower frequencies. Very low insertion loss with a maximum input power of 24dBm. Designed primarily for HF amateur bands, but specifications are accurate to frequencies up to 80MHz. Made in North America.

Complete ADS-B Antenna Pair Dedicated 1090MHz and 978MHz antennas with SMA connectors and MCX Adaptors, optimized for UAT and ADS-B signals in aviation tracking. Includes clear frequency labeling for instant identification. Universal SDR Compatibility Fits all SMA or MCX-input SDRs e.g., RTL-SDR. Bundled with 2 low-loss MCX-to-SMA adaptersno extra purchases needed for connectivity. Enhanced Signal Performance 5dBi gain and ultra-low VSWR 1.3 at center, 1.5 overall maximize range and reception clarity for portable ground stations. Ultra-Portable Flexible Mounting Compact 21cm 8.2 length, lightweight design, and foldable hinges for a multitude of mounting optionsideal for field use. Packing List 1090MHz antenna x1, 978MHz antennax1, MCX adapters x2..

Frequency Range Dual Band 978MHz 1090MHz Gain 5dBi. Antenna Connector SMA Male Connector Accessoried Connector Adapter MCX Plug to SMA Female Connector Adapter. Feature Magnetic Base Mounting Impedance 50 ohm Direction Omni-directional. Package List 1 x Antenna, 1 x Connector Adapter As the Picture Shown. Compatible with RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner.

19 HF antenna balun for long wire antennas includes excellent ESD protection on input. Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use. Excellent specifications. Only 39.2mm x 13.0mm and 5g.

Main function of UV5R Mini-amateur radio, up to 999 channels. 2s reproduction frequency, AM radio, FM radio, VOX, dual PTT, DTMF, compact design, strong signal, chirp support compatible programming software UV-5R Mini.. Programming and copying frequency of mobile app-It simplifies the process, eliminates complicated cables, and improves the convenience of users without computer programming APPOLA Radio.. Upgraded communication FM, AM. Support charging mode equipped with charging cable. Dual Watch function monitoring the AB channel.. Get weather forecast and receive emergency warning of extreme weather through NOAA. Even updating and providing information can ensure your safety in adverse weather conditions.. Firmly choose us-with bigger screen and better color display. Compared with traditional Baofeng radio screens such as Baofeng UV-5R, BF-F8, UV-9R Plus Pro, UV-9G and Baofeng UV-82, etc., the UV-5R mini has a larger screen and a more portable body, providing you with a better experience than typical portable service radios..

A high-quality amplifier LNA module that operates on a very wide range of frequencies from 300MHz to 8GHz. Provides a boost to weak signals, extending the reception range and improving overall signal strength. Engineered to deliver exceptional performance at S and C frequency bands offering significantly higher gain, a lower noise figure, reduced power consumption, and improved linearity for superior reception quality compared to competitive LNAs. Designed for professional and amateur radio enthusiasts, astronomy enthusiasts, wireless communication enthusiasts, and more. A variety of power options are available, including BiasTee 3.3V-5V, USB-C, or DC power with the included USB-C to DC barrel connector adapter, in order to maximize flexibility. A maximum current requirement of 65mA ensures compatibility with nearly all BiasTee configurations. Simple installation and compatibility with popular SDR Software Defined Radio models, including NESDR SMArt RTL-SDR and HackRF. Also serves as an excellent companion to the Ham It Down series of downconverters. A free male SMA to male SMA connector, USB-C power cable, and USB-C to DC barrel connector are included with your purchase. LaNA WB is assembled and housed in an aluminum enclosure, ensuring optimal performance.

Frequency Range 1090Mhz Features Magnetic BaseAntenna length 30cmCable Length 1.5MPolarization Type VerticalVSWR 1.5Rated Power 50WCable Type RG174. Gain6dBicolorblackStructure TypeHalf-Wave Dipole Omnidirectional AntennaConnectorSMA Male.Impedance 50 ohm.. Package2 x 6dbi 1090Mhz Antenna2 x SMA Female to MCX Male Adapter. Compatible with Raspberry Pi, weather stations, home security systems, smart meters, health monitors, public safety radios, and RTL-SDR dongles. This Kaunosta ADS-B antenna supports SDR, ADS-B, drone FPV, real-time aircraft tracking, airport monitoring, wireless networks, remote control, telemetry, and surveillance. Works with FlightRadar24, FlightAware Pro Plus, RTL-SDR, RPi 3, SDR tools, and most computers.. Great Value for Beginners Pros Affordable price without compromising performance. Whether you're tracking flights or building a DIY SDR setup, this antenna delivers clear signals without breaking the bank..

UPGRADED NanoVNA-H New HW Version V3.6. It is upgradeable as new firmware is developed. With MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable original PCB needs OTG cable, see a clear HD image on your phone. Added a ABS case, which is protective and dust-proof. Disply 2.8 inch TFT 320 x240. IMPROVED FREQUENCY ALGORITHM The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. MULTIPLE FUNCTIONS The default firmware main function is used for antenna performance measurement. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement. SUPPORT ANDROID PHONE PC SOFTSARE CONTROL Designed a practical and simple control application on PC, you can download touchstoneSNP files for radio design and simulation software. There is a PC interface that adds functionality and lets you work interactively on a bigger screen. Supports time domain analysis function TDR. Compatible with most Android mobile phones, convenient for connecting to mobile phones. Support Windows Computer Control. STRONG AND SECURE POWER SUPPLY This VNA is battery powered or USB powered. Built in 650mAh battery, could work for 2 hours continuously. For longer measurement time, kindly connect an external power source. The product interface displays battery usage, providing a clear understanding of the power status.

Reliable Lo Ra Communication The ThinkNode M1 compatible for LoRa Meshtastic uses nRF52840 and SX1262 Lo Ra modules with a 915MHz antenna, supporting the Meshtastic protocol for stable long-range transmissionperfect for outdoor use, team coordination, and off-grid communication. High-Precision GPS Navigation Built-in GPS supports GPS, GLONASS, BeiDou, and QZSS systems. The devices compatible for meshtastic deliver accurate positioning and seamless location sharing for navigation, exploration, or search missions, ensuring dependable off-grid performance anywhere. 1.54-inch E-Ink Display The kit compatible for meshtastic features a 1.54-inch E-ink display that stays clear under sunlight, shows real-time status, node info, and GPS data. With low power use and adjustable brightness, it offers efficient visibility for all environments. Long-Lasting Battery Life The device compatible for meshtastic includes a 1200mAh rechargeable battery for over 48 hours of use. Designed for fieldwork, hiking, and emergency response, it ensures continuous operation and reliable power during extended outdoor activities. Easy Setup Smart Control No assembly required. The kit compatible for meshtastic connects easily via Bluetooth 5 using the Mesh tastic app to configure settings, send messages, and view maps. The built-in RTC clock ensures a faster hot start, supporting automatic wake-up and uninterrupted operation.

Listen to ALL HF, down to 100kHz and below, with nearly any software defined radioListen to ALL HF, down to 100kHz and below, with nearly any software defined radio Massively improved performance vs. any direct sampling hacks and implementations. Proudly made in the USA and Canada with high-quality components. Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Also available in a 'Plus' version, which includes a TCXO and frequency capability down to 300Hz. Product name Ham It Up Plus Barebones, Amazon SKU B076CYH6NL.

This bundle will allow you to receive detailed, high-resolution, near real-time images from orbiting weather satellites. With as little as an hour of setup, you will be receiving LRIT, HRIT and HRPT GOES transmissions, error-free and with ease Applications include GOES HRIT LRIT, NOAA HRPT, Meteor M2 HRPT, Metop, FengYun and other satellites that operate near 1.6GHz-1.8GHz. This GOES Weather Satellite SDR bundle includes a 21dBi GOES parabolic reflector antenna 1.7GHz center frequency, 200MHz Bandwidth, NESDR SMArTee XTR SDR receiver, SAWbird GOES LNA module, 10m LMR400 cable, and the other cables and adapters required for a full weather satellite receiver. Just add a host device and software, and you are ready to go. Software is required for the decoding of images. The recommended option is SatDump, which is cross-platform and available for Windows, Linux, MacOS and Android. There are also other free Linux-based decoders, or the paid version of XRIT Decoder for Windows license not included with purchase. Full 2 year warranty directly through Nooelec Additional information and assembly instructions support.nooelec.comhcen-usarticles360058812593.

A high-quality, high-performance broadcast AM bandstop notch filter designed for software-defined radio SDR applications. Includes free male SMA-male SMA barrel connector. Flamingo AM was designed to provide approximately 70dB attenuation for broadcast AM frequencies while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 300kHz and 1900kHz. The minuscule out-of-band insertion losses mean that the filter can stay in place for most any application -- though we do recommend removing Flamingo AM from the signal chain when not receiving HF frequencies. Flamingo AM can pass-through DC bias-tee power when required. DC current handling is 200mA max. Flamingo AM makes a great companion to our Ham It Up series of HF upconverters available separately on Amazon. The notch filter is fully EMI shielded and installed in a custom anodized aluminum enclosure for further protection and isolation. The front end is protected by an RF-rated ESD diode, which provides protection not just for your filter, but also for the radio or SDR behind it.

Full Integration Channel Usrp - The first fully integrated channel USRP device with a continuous RF coverage range of 70 MHz to 6 GHz.. Open Source Support and Reconfigurable Fpga - Supported by open source for UHD, GNURadio, and OpenBTS. Features a reconfigurable Spartan 6 6SLX150 FPGA, catering to advanced users.. Fast and Convenient Usb 3.0 Connection - Offers quick and seamless data transfer with a high-speed USB 3.0 connection.. Designed for Ettus Usrp B210 - Ensuring consistent size and interface performance based on the for ETTUS USRP B210 schematic.. Full Duplex and Mimo - Capable of full duplex and MIMO 2 Tx and 2 Rx with a real-time bandwidth of up to 56 MHz orthogonal 61.44MSs..

Balun One Nine is a very small 91 HF antenna balun for long wire and dipole antennas. Improved performance over the smaller and lighter Balun One Nine v1, including lower insertion loss and expanded lower frequency limit. Includes 3 different terminal block adapters for various wire configurations and diameters. Excellent ESD protection on the antenna input. Made in North America. Full 1 year warranty.

Advanced SDR Technology Powered by DSP architecture with 192kHz spectrum display and 16-bit sampling for CW, AM, SSB, FM demodulation.. Wide Frequency Range Covers 100KHz-149MHz with 1Hz step resolution, supporting modes like CW, AM, SSB USBLSB, WFM, and FM stereo.. Portable and Durable Design Compact 14x7.4x2.2cm, lightweight, and housed in an aluminum alloy CNC shell for excellent portability and durability.. User-Friendly Operation Features touch screen controls, rotary encoder, and the ability to preset up to 99 channels, including station names and settings.. Long Battery Life Built-in 5000mAh rechargeable battery offers up to 12 hours of use, ideal for outdoor and travel applications..

The radioberry is actual a radio card raspberry pi 4 hat installed with the latest hardware V.Beta5, which can be plugged into a raspberry pi 4, forming a Software Defined Radio SDR. RPI4 is the target for running the radioberry. The radio card uses an Analog Devices AD9866, which is a 12-bit broadband modem mixed signal front end that has been repurposed as a direct down conversion DDC and direct up conversion DUC SDR transceiver covering 0-30 MHz. The radio card uses an Intell Cyclone 10LP FPGA, supporting the 10CL25.The firmware will be loaded via the raspberry pi. If you need a software to make it work, here's a software for your reference drive.google.comdrivefolders107P8LtLrib3iiQJd-Ooc6LsHVtl1SYayuspsharing. Power supply for the radio card is provided by the raspberry pi 4 For more infomation, please go visit github . compa3gsbRadioberry-2.xwikiOverview. Package content 1pcs SDR Radioberry for Raspberry Pi 4.

Included Nooelec USB dongle antenna. RTL2832U interface IC R820T tuner IC on USB dongle. These are custom USB devices tuned for SDR and include much better components than generics. Full 1-year warranty installation support available.

No more blocked USB ports This RTL-SDR was designed into a tiny form factor to ensure proper fit within the smallest USB-compliant spacing. The Nano 3 is just 17mm x 8mm x 20mm 15g. The high-quality aluminum enclosure and silicone pads ensure that heat and stray EMI stay where they belong. The included articulating SMA connector allows for connection of both male SMA and male MCX antenna types without additional expenditures. The industry-leading 0.5PPM temperature-controlled crystal oscillator TCXO ensures that you will always be able to find the signal you need with absolute minimal drift and jitter. Proudly built in North America in our US Canadian facilities. Full 2 year product warranty.

A high-quality, high-performance bandstop filter designed to attenuate broadcast FM for software defined radio SDR applications, with minimal interference to adjacent bands and tiny insertion loss. Bandstop design means the filter will pass DC bias-t power. Makes a great companion to any SDR, but especially RTL-SDRs like our NESDR series, which can be easily overloaded by strong broadcast FM signals. DistillFM has its filter circuitry fully shielded with an EMI frame, and has its front end protected by an ESD diode meant for RF applications. Designed and manufactured by Nooelec in the United States. Full 2 year product warranty direct through Nooelec.

A high-quality, high-performance broadcast AM bandstop filter designed for software defined radio SDR applications. Includes free male SMA-male SMA barrel connector Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty. Broadcast AM stations can be particularly problematic due to the high-powered transmitters used for broadcasting in some areas. These signals can overload the front end of an SDR, causing imaging and a number of other issues. As such, Flamingo AM makes a great companion to our Ham It Up series of HF upconverters available separately on Amazon. Flamingo AM was designed to provide approximately 40dB attenuation for broadcast AM frequencies, while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 350kHz and 1900kHz. The minuscule out-of-band insertion losses means the filter can stay in place for most any application--though we do recommend removing Flamingo AM from the signal chain when not receiving HF frequencies. Flamingo AM is a proper bandstop filter, so you are able to pass-through DC bias-tee power when required. DC current handling is 250mA min, and the maximum recommended signal level is 18dBm 5Vp-p, so there is no issue using the filter for higher-power applications. The filter is fully EMI shielded, installed in a custom anodized aluminum enclosure for further protection and isolation. The front end is protected by an RF-rated ESD diode, which provides protection not just for your filter, but also the radio or SDR behind it.

Flamingo FM Flamingo FM v2 is a high attenuation bandstop filter designed to stop very strong broadcast FM transmissions from causing overload and other issues with your radio or SDR. The attenuation level of this filter is much higher than Flamingo FM v1 60dB typical avg. 70dB typical max attenuation. We recommend this filter for urban environments and other locations with high-wattage FM transmitters nearby. For other locations, Flamingo FM v1 is a better option. Flamingo FM has a higher attenuation than other similar commercial filters, while also have a lower insertion losses outside of the stop band 0.25dB avg. and less of an effect on the adjacent VHF airband of 108MHz-137MHz 8dB avg. attenuation vs 16dB avg. of similar filters. Designed and manufactured by Nooelec in North America, with a full 2-year product warranty.

The ultimate SDR bundle for USB On-The-Go applications. You can't get much more portable than this. Includes NESDR Nano 3 in an anodized aluminum enclosure, 1 nano-sized antenna, 3 USB OTG adapters. 1 heatsink and an articulating adapter for SMA antennas. Does not include USB OTG-compatible host device. Designed for USB-C not micro-USB host devices. The included RTL-SDR can be used with other host device operating systems besides Android, including Windows, OS X, and Linux. Full 2 Year Warranty Assembled in the USA.

An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases. Unmatched price performance--redesigned PCB reduces noise by an average of a full 3dB Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed 0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a - 2PPM initial offset. Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi. Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software. Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty.

Unmatched price performance--redesigned PCB reduces noise by an average of a full 3dB Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed 0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a - 2PPM initial offset. Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi. Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software. Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty.

Premium RTL-SDR bundle includes NESDR SMArTee XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m 6.5' RG-58 feed cable, and 3 antenna masts. A wide variety of improvements on other designs, including integrated 4.5V 250mA bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector. Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi. SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty.

Kit contains a 1090MHz SMA antenna, a 978MHz SMA antenna, and 2 male MCX to female SMA pigtail cables. Perfect for embedded, portable or ground ADS-B applications where weight, size and range are all concerns.. Antennas have foldable hinges for a multitude of mounting options. Compatible with any SDR with SMA or MCX input connector. Pigtail cables are made from quality RG316 and kept to 6 in length to minimize loss.

Includes 2pc NESDR Nano 2 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup.. The small size of the NESDR Nano series of SDRs ensures your embedded application has a footprint as small as possible.. Each SDR includes a calibration sticker and adhesive identification labels.. 4 ADS-B antennas, 3 RF pigtail cables and 2 RF adapters are included to facilitate a very wide range of installation options for embedded applications.. Full 1-year warranty through Nooelec on all bundle components..

Bundle includes 4 ADS-B antennas, 3 RF cables, 2 RF adapters, 2 optional heatsinks, and 2 NESDR Nano 3 SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup. The NESDR Nano 3 SDR was designed to eliminate issues with USB port occlusion. You can install the SDRs side-by-side and back-to-back in nearly any portableembedded device, like the Raspberry Pi 3, without the use of USB extension cables, removal of the SDR PCB from the enclosure, or other such hacks. The NESDR Nano 3 SDRs are installed in aluminum enclosures to greatly reduce EMI, improve performance, and facilitate heat transfer from the PCB to the exterior of the device. The NESDR Nano 3 SDRs utilize a high-quality 0.5PPM TCXO. This ensures tuning stability, even in extreme conditions. Designed assembled by Nooelec in the United States. Full 2-year warranty on all bundle components.

Contains RTL2832U interface IC and the new, improved R820T2 tuner This tuner has improved sensitivity and SNR compared to devices using the R820T. Unmatched price-performance.. Contains all the same improvements on the 'generic' design as were made on the popular and well-tested NESDR Mini, including higher-accuracy clock, low-ESR capacitors, high-Q inductors, and more. 1-year warranty direct from Nooelec With locations in both the US Canada, and full technical support services, your investment is a safe and wise one.. Frequency capability is approximately 24MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with the Ham It Up upconverter sold separately.. Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen.

Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m 6.5' RG-58 feed cable, and 3 antenna masts. A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector. Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi. SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty.

Included RTL2832U and R820T tuner ICs on the USB device. Nooelec guarantees a protection diode on the input to protect from ESD damage. Compatible with most SDR software, including SDR. Provides an approximate tuning range of 27MHz-1700MHz for software defined radio SDR. Includes Nooelec USB SDR and antenna. Full 1-year warranty against manufacturer's defects.

A great addition to any radio or software defined radio with female SMA input, including our NESDR SMArt series and HackRF. 8 male SMA adapters in total, allowing you to connect the following antenna types to your radio N-connector, F-connector aka 'Coax', SO-239 aka 'UHF' or 'PL-259', BNC, MCX, PAL, RP-SMA, and SMA female. Full list in description below. A convenient carrying case is included. Great for field use Ample room to house your NESDR SMArt or NESDR Nano SDR. 50 Ohm, low-loss adapters--lower loss than any RF cable adapters. NOTE RP-SMA looks similar, but is not the same These will not work for RP-SMA. RP-SMA is generally only used for things like WiFi equipment, not radios, but if you are unsure please contact our support team for assistance.

Mini-Whip MF HF VHF SDR antenna or miniwhip shortwave active antenna is suitable for ore radio and tube transistor radio, meanwhile, RTL-Sdr receives for Hack.. Using high-quality PCB board, it is with continuous connection, via precision craft by many experts.. Its effective frequency band includes medium, short and ultra short waves. And you can use it in confidence.. Such an antenna is entitled with high performance according to strict rule, and it is easy to use in the practical life.. Made of Metal PC materials in high quality, it can get great popularity, entitled with practial adoptability..

Wide UseThe tuner set is suitable for general radio scanning,air traffic control,public safety,ADSB aircraft radar,maritime ,ACARS,relay radio,P25 MotoTRBO digital voice,POCSAG,weather balloon,APRS,NOAA APT Meteor M2 Weather satellites,radio astronomy,etc.. ApplicationThe tuner is suitable for use as a computer based radio scanner,such as SDR,HDSDR,SDR Radio,GQRX or SDR Touch on for phone. Computer ApplicationThis tuner set is suitable for computers for Windows,for OSX,for Linx,for phone,etc.. Antenna is Easy to InstallThis antenna is easy to install and is an excellent antenna replacement part for broken TVs and FM radios.. Antenna BaseThe antenna base has a stable and better receiving effect,which only needs to be tightened or inserted into for installation..

A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Frequency range is 300Hz-2.3GHz with a frequency gap near 1.1GHz. The NESDR SMArt XTR HF Bundle utilizes a well-designed upconverter--the Ham It Up Plus v2--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs. This results in a vastly different HF experience--much better performance, and no loss of gain controls. Included is a Ham It Up Plus v2 upconverter, installed in a custom black aluminum enclosure an NESDR SMArt XTR RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters and cables. Only available for a limited time Due to the frequency gap this is NOT recommended for ADS-B. Instead try our NESDR SMArt HF Bundle Amazon product code B0747PX3NZ.

RTL SDR Receiver This RTL SDR receiver covers 100KHz to 1766MHz, supporting , FM NFM, WFM, CW, DSB, LSB, USB demodulation. Ideal for listening to medium, short, FM, aviation bands, and more. Added features CTCSS, DCS, frequency scanner, automatic scanning, etc.. 0.5 PPM TCXO Features tuning and minimal temperature drift, covering all HF amateur bands, VHF, and UHF frequencies from 24 to 1766MHz, with up to 3.2M sampling rate 2.8MHz stable. Receiver modes include , NFM, FM, DSB, USB, LSB, and CW.. RTL2832U and R820T2 Chipset Utilizes RTL2832U and R820T2 chipset for improved sensitivity compared to R820T, with better performance around 1.5 GHz. Fully compatible with old R820T software. Operating frequency 100KHz to 1766MHz, covering all amateur bands.. Direct Sampling Supports shortwave Q branch direct sampling depending on SDR software used, with 8 bit ADC providing approximately 50 dB dynamic range, 50 ohm input impedance, and independent antenna inputs for shortwave and VHF.. USB Computer Connection Mini USB powered, receives low, medium, high frequencies 0 to 30MHz. HF band antenna must be connected to input port, while reception requires compatible antennas like long wire, random wire, dipole, etc., for optimal performance..

Multiple Receiver Modes Enjoy nfm, fm, dsb, usb, lsb, and cw modes for versatile radio reception options.. Improved Sensitivity Chipset Utilizes rtl2832u and r820t2 chipset for enhanced performance at 1.5 ghz and full frequency coverage.. Direct Sampling Capability Supports frequency q branch direct sampling with 8 bit adc providing 50 db dynamic range.. Usb Connectivity Easily connect to your computer via mini usb for receiving low, medium, and high frequencies up to 30mhz.. Precise Tuning Tcxo Features 0.5 ppm tcxo for accurate tuning and minimal temperature drift, ideal for hf, vhf, and uhf frequencies..

Frequency Range Tiny Spectrum Analyzer with two inputs, high quality MFHFVHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.. Built-in Calibration Signal GeneratorWhen not used as Spectrum Analyzer it can be used as Signal Generator, MFHFVHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.. Tiny Spectrum analyzers ESD FunctionSwitchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.. PC ControlConnected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.. Package List1x Tiny Spectrum Analyzer 2 x 20cm RF Cable1 x USB Cable1 x SMA Female to Female Connector1x Touchscreen Pen1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link..

Advanced DSP SDR Receiver This software-defined radio SDR receiver features DSP digital demodulation technology, supporting CW, AM, SSB LSBUSB, WFM, and FM stereo with headphones. With 192kHz real-time spectrum and waterfall display, it offers exceptional performance for amateur radio enthusiasts.. High-Resolution 4.3 Touchscreen The 800x480 IPS LCD touchscreen provides a bright, clear display for easy operation. The resistive touch rotary encoder control makes tuning and adjustments effortless.. Superior Reception Wide Frequency Range Covers 100KHz to 149MHz with excellent sensitivity, thanks to a powerful DSP chip and a high-gain retractable antenna. Enjoy strong signal reception and minimal interference.. Durable Portable Design Housed in an all-aluminum alloy CNC shell, this handheld radio is built for durability and portability. Measuring just 140x74x22mm and weighing 315g, it's easy to carry for outdoor use..

RTL SDR Receiver This RTL SDR receiver covers 100KHz to 1766MHz, supporting , FM NFM, WFM, CW, DSB, LSB, USB demodulation. Ideal for listening to medium , short , FM, aviation bands, and more. Added features CTCSS, DCS, frequency scanner, automatic scanning, etc.. RTL2832U and R820T2 Chipset Utilizes RTL2832U and R820T2 chipset for improved sensitivity compared to R820T, with better performance around 1.5 GHz. Fully compatible with old R820T software. Operating frequency 100KHz to 1766MHz, covering all amateur bands.. 0.5 PPM TCXO Features tuning and minimal temperature drift, covering all HF amateur bands, VHF, and UHF frequencies from 24 to 1766MHz, with up to 3.2M sampling rate 2.8MHz stable. Receiver modes include , NFM, FM, DSB, USB, LSB, and CW.. Direct Sampling Supports shortwave Q branch direct sampling depending on SDR software used, with 8 bit ADC providing approximately 50 dB dynamic range, 50 ohm input impedance, and independent antenna inputs for shortwave and VHF.. USB Computer Connection Mini USB powered, receives low, medium, high frequencies 0 to 30MHz. HF band antenna must be connected to input port, while reception requires compatible antennas like long wire, random wire, dipole, etc., for optimal performance..

Upgrades from our Previous Generation UV-5R Twice the Output Power 8 watts up from 4 watts output, New Hardened Durable Radio Shell, 30 Larger Battery, V-85 High Gain Antenna Twice the Antenna Performance, USA Support In-depth User Guide Included A PC03 FTDI Programming Cable is Recommended for Easier PC Programming. High Med Low Power Settings 8W, 4W, 1W Frequency Range VHF 136-174 MHzRxTx. UHF 400-520 MHzRxTx Broad Wide Narrowband Narrow Selectable. The BF-F8HP was designed in the USA and because not everyone is a radio-expert we really wanted to focus on providing an easier user experience That starts with the new in-depth manual that guides you through the capabilities and customization of the BF-F8HP. On top of that the BF-F8HP also includes exclusive concierge customer help and warranty support. This concierge service is only available on select BaoFeng models such as the BF-F8HP, UV-82HP, and UV-5X3. Kit Includes BF-F8HP, 2100mAh Battery, V-85 Dual Band Antenna, CH-5 Charger, CH-5 110V Adapter, Earpiece Kit, Wrist Strap, Belt Clip, User Manual. BTECH is proud to be in the USA, which allows you to have the best available local support for any issue that may arise. BTECH only engineers and develops radio products. That brand focus allows you to have the best available radios and accessories with the most features, with real USA warranty and support..

Tiny but very Powerful - This is a very well built radio with a super cool high tech look. This tiny package is an AIRAMFMSWVHF and Weather Band radio, a media player from optional TF card, a Bluetooth receiver, and alarm clock, an LED flashlight, and an emergency alarm. All that in a radio that's smaller than the palm of your hand The shortwave radio have a record function, you can directly operate the device itself to record the current broadcast without operating the APP application.. AIR band 5 types of light effects APP Remote Control - It also receives VHF and AIR bands, making it ideal for frequent air travelers. The ZWS-A320 radio has five different types of lighting effects and it supports programming the duration of the backlight. There is an app that you can download to use together with this radio. It controls the unit over Bluetooth. The app is really neat too, gives you all of the controls from volume to tuning, band select, EQ, etc.. Superb Sound Replaceable Battery - The 2-inch 5W high quality speaker is backed by a bass radiator and driven by a high quality amplifier. With the volume turned up it is quite loud and full with little to no distortion. It also has 6 equalization options, not only supports Bluetooth and MicroSD card playback mode, but also supports radio mode. In addition, It uses a replaceable 2000MAH lithium battery which is charged through a USB-C jack. It is charged 4 hours for 20 hours using.. Excellent Reception 995 Memory - You get AIR, FM, VHF, AM, SW 3.20-21.95MHz, and weather band with NOAA emergency alert function. If the built in 21.6 antenna isnt enough, there is an additional 9.85 foot long wire antenna that you can clip onto the built-in antenna for added reception capabilities. The built-in antenna is made of high toughness material, which is not easy to break. The radio can store 995 channels FMVHFAMSWAIR 199 of each and can manually delete saved channels.. Ultra-Portable - The handy size of 4x2x4.7 in and weight of 0.79 lb, equipped with a handbag and lanyard, make it easier to carry and store. The size of the unit enables the user to carry it during travel, without burdening oneself with weight or bulk. Perfect for hiking, camping, party, and travel, etc. If there is any problem with the product, please contact us and we will give a satisfactory solution. a full 12-month guarantee and 24-6 customer service if you encounter question..

Premium software defined radio NESDR SMArt XTR in a beautiful silver brushed aluminum enclosure. A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector. Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi. SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. Proudly built by NooElec in the USA and Canada Full 2-year product warranty..

Best available SDR for portable Android and IOS applications, remote installations, embedded applications, and anytime a tiny SDR is ideal--less than 1 square. Contains RTL2832U interface IC and the new, improved R820T2 tuner This tuner has improved sensitivity and SNR compared to devices using the R820T. Unmatched price-performance.. Contains an ultra-low phase noise, 0.5PPM TCXO. Specifications in description below. Bundle includes a free telescopic antenna. 1-year warranty direct from NooElec With locations in both the US and Canada, and full technical support services, your investment is a safe and wise one. Frequency capability is approximately 25MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with the Ham It Up upconverter sold separately.

Turn your computer, phone or tablet into a radio scannerham radio receiver that can receive nearly all RF signals Compatible with Windows, Mac OS, Linux, and Android. NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS plane-ground communications, ADS-B plane tracking, AIS ship tracking, POCSAG pagers, NOAA and GOES weather satellites weather images, weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more. The best-performing low-cost RTL-SDR available anywhere Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz. v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna sold separately, product ID B08HGSYB7R or B00R09WHT6. Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience sold separately, product ID B076CYK8XZ. Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m 6.5' RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty and product support through our support portal at httpssupport.nooelec.com. Full datasheet available httpswww.nooelec.comdatasheets100700.

Turn your computer, phone or tablet into a radio scannerham radio receiver that can receive nearly all RF signals Compatible with Windows, Mac OS, Linux, and Android. NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS plane-ground communications, ADS-B plane tracking, AIS ship tracking, POCSAG pagers, NOAA and GOES weather satellites weather images, weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more. The best-performing low-cost RTL-SDR available anywhere Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz. v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna sold separately, product ID B08HGSYB7R or B00R09WHT6. Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience sold separately, product ID B076CYK8XZ. Your purchase includes a NESDR SMArt v5 RTL-SDR. For a version which includes an antenna set, see product ID B01GDN1T4S. Proudly built by Nooelec in the USA and Canada Full 2-year product warranty and product support through our support portal at httpssupport.nooelec.com. Full datasheet available httpswww.nooelec.comdatasheets100701.

Amplifier module with double sides by the process of immersion gold, brightness and smooth coating, good welding property, unconditionally stable. High Gain Low Noise LNA Amplifier, Maximum output power P1dB 22dBm typical, 39.5 dBm Output IP3. Easy to use, excellent performance, uniformity and reliability. Bandwidth 0.01-4GHZ. Noise coefficient 1.3dB Power supply voltage typical 5V typical current value 125mA. Size32 23mm 1.26 0.91inch Color red gold.

With this known RF SWR Bridge board, you can measure in thru-mode filters, amplifiers and in reflective mode antennas, impedances, inductance, capacitance and impedance matching etc.. Can be used with HiQSDR or compatible SDR Transceivers with N2ADR software and series of USB RF Analyzers.. Fine workmanship and good performance. Easy to use. Long service life.. Specifications Working frequency 0.1- 3000MHZ Connector SMA Return loss more than 35db. Package List 1 RF SWR Reflection Bridge. If you have any question about the products,please us in time. 24-hour professional Customer service to answer any questions for you.we will help you satisfy solve it,and support all refund if there is some defect.

WiFi LoRa 32 is a classic IoT development board, V3 version, integrated Wi-Fi, BLE, LoRa, 0.96 inch OLED display and other functions. Not Compatible with LoRa 32 V2. Frequency 863928MHz Wi-Fi 802.11 bgn, up to 150Mbps. 8MB Memory Storage Capacity. Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures. This WiFi Esp32 Lora V3 development board comes with one U.FL to SMA connector LoRa antenna.

The radioberry is actual a radio card raspberry pi hat, which can be plugged into a raspberry pi, forming a Software Defined Radio SDR. For more DETAILED information look into github .compa3gsbRadioberry-2.xwikiradioberry. The radio card uses an Analog Devices AD9866 which is a 12-bit broadband modem mixed signal front end that has been repurposed as a direct down conversion DDC and direct up conversion DUC SDR transceiver covering 0-30 MHz. The radio card uses an Intell Cyclone 10LP FPGA, supporting the 10CL16 and 10CL25. The firmware will be loaded via the raspberry pi. If you need a software to make it work, here's a software for your reference drive.google.comdrivefolders107P8LtLrib3iiQJd-Ooc6LsHVtl1SYayuspsharing. Power supply for the radio card is provided by the raspberry pi. To control filter boards or other extended hardware there is IN-OUTPUT available. Driver for radioberry groups .google.comgradioberrycMf2VZZU6ltA, download and refresh to card. The rapsberry pi runs the Raspberry Pi Operating System. The radioberry consists of 2 components raspberry pi RPI4 and radioberry card raspberry hat. Package content 1pcs SDR Radioberry for Raspberry Pi 44B.

DM-32UV is a UHFVHF walkie-talkie with digital DMR and analog dual modes, which supports 10W high power HML switching, 4,000 channels, GPS, APRS position report, digital encryption ARC4AES128AES256 and other functions, covering short message, recording, emergency alarm, and independent working mode.. Communication mode supports digital DMR private network call, group call and full call and analog mode CTCSSDCSDTMF2TONE5TONE to realize dual-mode smooth transition.. Positioning and reporting GPS positioning supports APRS automatic position reporting the uploading interval can be set at 60-7650s.. Encryption and security digital encryption supports customization, ARC4, AES128, AES256 to ensure voice and data privacy.. Additional functions recording digital mode supports 10 hours, emergency alarm, independent working mode, FM radio , NOAA weather warning North America..

Universal Compatibility This telescopic antenna features an SMA male connector, making it suitable for SMA female connector radios, SDRs, and more.. Six Adjustable Sections With six sections, you can easily adjust the length of the antenna to improve your reception and signal quality.. Versatile Usage Ideal for a wide range of applications, from television and radio to remote control devices, lamps, VCDs, and specialized communication antennas.. High-Quality Connection The SMA male connector ensures a reliable and secure connection, enhancing the performance of your devices.. Enhance Signal Strength Improve your reception and communication capabilities with this SMA Male Connector Radio Telescopic Antenna..

Frequency Range Dual Band 978MHz 1090MHz Gain 6dBi. Antenna Connector SMA Male Connector Accessoried Connector Adapter MCX Plug to SMA Female Connector Adapter. Feature Magnetic Base Mounting Impedance 50 ohm Direction Omni-directional. Package List 1 x Antenna, 1 x Connector Adapter As the Picture Shown. Compatible with RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner.

High-quality custom aluminum enclosure for Ham It Up v1.3. Metal case helps to protect PCB from stray EMI, improving sensitivity.. Includes all required hardware to mount your PCB. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined.. Ham It Up upconverter sold separately..

The long range radio antenna with SMA-F connector suitable for handheld walkie talkies with SMA female connector,compatible with Baofeng UV-5R BF-F8HP 888S BTECH Arcshell AR-5 Retevis RT29 RT86 RA79 RT29D RB85 RT5R RT56 EZTalk 2 P1 RT86S Aliunce HD1 HD2 two way radio and more. VHFUHF 144430 MHz 136-174400-480MHzMHz dual band antenna. The walkie talkie antenna Enhanced signal strength,gain 2.15dBi,max power 20W,impedance 50ohm,33cm14inch in length,extend the range of your communication. The ham radio antenna is an ideal choice for outdoor sports enthusiasts camping activities mountaineering camping hunting and so on. Easy to carrying,durable,can be used for a long time.

This desktop scanner antenna is suitable for both indoor and outdoor use. It comes with a strong magnetic base, allowing it to stand near windows, refrigerators, or scanning equipment, or even attach to a car roof. However, it is not ideal for high-speed movement.. Multiple adapters The package includes an SO239 male connector harness, a BNC male to SO239 female adapter, and an SMA male to SO239 female adapter. Supports scanner radios with SO239, BNC, and SMA interfaces.. The desktop discone antenna transmits on 100-1600MHz, include 70cm 2m GMRS VHF UHF lora 108-136 AM air band sdr 144 430 904 1090 908-928 1200MHz..

Best available SDR for portable Android IOS applications, remote installations, embedded applications, and anytime a tiny SDR is ideal--less than 1 square. Contains RTL2832U interface IC and the new, improved R820T2 tuner This tuner has improved sensitivity and SNR compared to devices using the R820T. Unmatched price-performance.. 1-year warranty direct from NooElec With locations in both the US Canada, and full technical support services, your investment is a safe and wise one.. Free high-quality telescopic antenna, much improved over the older thin-whip style antenna. Turn on, tune in and...listen. Frequency capability is approximately 25MHz-1750MHz, with no gaps within that range. Expansion to HF, all the way down to 100kHz, is available with the Ham It Up upconverter sold separately..

Includes all hardware and software free download you need to get started with software defined radio. Listen and see nearly any RF signal within the frequency capability of the radio 100kHz-1700MHz. Included is an NESDR SMArt v5 RTL-SDR, 3 antennas, a Flamingo FM broadcast FM bandstop filter, 10 RF adapters and cables, and a carrying case. Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 247 technical support availability. Please contact our support team any time if you have questions. Amazon-exclusive bundle Only available for a limited time.

New Redesigned for lower noise, better sensitivity and lower power consumption.. Design changes include RF-suitable 3.3v power supply with 110th of the noise of other SDRs, shielded power inductor for improved EMI rejection, and more. A male MCX to female SMA adapter and strong magentic antenna mount included as standard.. R820T2 tuner provides substantial performance improvements over R820T-based devices. Full support and service directly through Nooelec.

A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. The NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks. This results in a vastly different HF experience--much better performance, and no loss of gain controls. Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure an NESDR SMArt RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters. Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 247 technical support availability. Please contact our support team any time if you have questions. Amazon-exclusive bundle Only available for a limited time. NOTE enclosure colors may vary contingent on availability.

A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Frequency range is 300Hz-2.3GHz with a frequency gap near 1.1GHz. The NESDR SMArt XTR HF Bundle utilizes a well-designed upconverter--the Ham It Up Plus v2--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs. This results in a vastly different HF experience--much better performance, and no loss of gain controls. Included is a Ham It Up Plus v2 upconverter, installed in a custom black aluminum enclosure an NESDR SMArt XTR RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters and cables. Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 247 technical support availability. Please contact our support team any time if you have questions at support.nooelec.com. Only available for a limited time Due to the frequency gap this is NOT recommended for ADS-B. Instead try our NESDR SMArt HF Bundle Amazon product code B0747PX3NZ.

Ultra-accurate 0.5PPM TCXO clock for rock-solid tuning. Custom design with dual ESD protection on antenna input. Genuine verified E4000 tuner IC for a receiving range to 2300MHz. Small light. Fantastic for portable applications.

Wide frequency coverage This SDR receiver operates from 0.1kHz to 1.7GHz for monitoring ham radio broadcast aviation signals and transceiver testing.. Portable design The software defined radio draws power from a USB port so no external supply is needed making it a portable tuner for field use.. Aluminum housing The metal case aids heat removal during extended tuning sessions to keep the spectrum analyzer stable for long term work.. Broad software compatibility This USB spectrum analyzer works with other popular platforms for flexible signal analysis by hobbyists.. Extended tuning with SMA connector Extended tuning capability plus SMA connector allows connection of various s for amateur radio enthusiasts and transmitter signal monitoring..

ASSEMBLED ADS-B KIT Stratux dual band ADS-B receiver kit includes AHRS, fan controller, 10000mAh battery pack, suction mount, strap, SD card adapter, power cable, supports ForeFlight Synthetic Vision and other popular EFBs. It has a 30 day return policy and technical support backed by Crew Dog Electronics.. RELIABLE INFORMATION High-gain dmurray14 antennas are optimized for 978 MHz and 1090 MHz frequencies allowing you to receive and display air-to-air traffic, data, and FIS-B weather including animated regional and CONUS NEXRAD, METARs, TAFs, AIRSIGMETs, PIREPs, winds and temps aloft, TFRs, NOTAMs, and SUA information.. PORTABLE Stratux is a highly portable receiver including a suction mount for window mounting. Provides ADS-B traffic and weather information and navigation GPS position using internal GPYes WAAS GPS receiver, supports multiple iPads, iPhones, or Android tablets connected via WiFi. Perfect for WiFi only iPads and tablets.. LATEST FIRMWARE Latest Stratux software v1.6r1 is already loaded on MicroSD card. Just plug in included rechargeable battery pack for 4 hours of flying time.. COMPATIBILITY Stratus 2S functionality at Scout prices. Built using Raspberry Pi 3 board and parts direct from Stratux project founder. Supports ForeFlight, FlyQ EFB, Navigator, AvNav, WingX, Avare EFB, FltPlan Go, DroidEFB, AerovieReports, Avplan EFB, iFly GPS, DroidEFB, OzRunways EFB, Garmin Pilot..

Cable RF SMA Male to SMA Female Bulkhead Connector RG174 Cable 5m16.4ft Impedance50 Ohm. Adapter SMA Male to Male Adapter SMA Male to Female Adapter SMA Female to Female Adapter Impedance50 Ohm. Cable connectors can make cable into1.SMA Male to Male cable 2.SMA female to female cable So this product can meet your diversified needs.. Application Used for the Network system,security system,FPV devices,Wifi routerWLAN Wifi antenna,Radio,Video,3G 4G LTE Antenna,GPS antenna,module etc.NOT For TV. Package 1x SMA Adapter Cable 3pcs SMA adapters.

Wide for frequency RangeThis tuner receiver covers a wide operating for frequency range from 100kHz to 7GHz, allowing you to receive various signals including meteorological data, amateur radio, GPS signals, FM radio, shortwave broadcasts, and more.. Versatile FunctionalityWith this tuner receiver, you can monitor meteorological agencies, track high-altitude balloons, receive wireless for temperature and power sensors, decode for APRS packets, watch analog television broadcasts, use it as an RF detector on devices, and even receive NOAA weather for SATELLITE imagery.. Amateur for Radio CapabilitiesListen to VHF and UHF amateur radio bands, decode digital amateur digital communications such as CWPSKRTTYSSTV, and receive SSB amateur radio signals via LSBUSB modulation.. Diverse ApplicationsApart from its use in amateur radio, this tuner receiver is also suitable for radio astronomy, for METEOR monitoring, decoding RDS messages, listening to DAB radio, receiving DRM signals, and even detecting signals such as over-the-horizon OTH and HAARP signals.. DesignConstructed with an aluminum shell, this tuner receiver offers durability and reliability. It comes with a USB cable and a test whip antenna for convenient usage..

Working process Menu- Receiver-Port or SensorAPI to get data from GPS Receiver after instialled GNSS software Software can be downloaded from CD-ROM and Official website. Compatible Win 1110 Win 8 Win 7VistaXP98CE. Free GNSS Evaluation Software. 56-Channel All-IN-VIEW Tracking. USB Port, Magnetic base, High sensitivity and Strong Singal,Protocol NMEA 0183. Cable Length 6.5 Ft 2 Meters , IPX4 Water Resistance Dust-tight.. Support OpenCPN, Kali Linux, Realtime Google-Earth Pro and maps. 1 Year Warranty..

Includes 1x Active L-Band Patch Antenna Covering 1525 - 1660 MHz in Weather Proof Enclosure, 1x 2 meter RG174 extension cable, 1x Flexible Tripod Mount, 1x Suction Cup Mount. This is an active amplified filtered high performance patch antenna designed for receiving L-Band satellites such as Inmarsat, Iridium and GPS.. Easily mountable outside on a window, surface, stick, tree branch etc. Comes with easy to use mounting solutions and extension coax, and is enclosed in a fully weather proof plastic cover.. Requires 3.3 - 5v bias tee power. The RTL-SDR V3 provides 4.5v so is suitable.. Does not require additional filtering or amplification. Ready to power up and use as is..

Dipole set includes 1x dipole base with 60cm RG174, 2x 23cm to 1m telescopic antenna, 2x 5cm to 13cm telescopic antenna, 1x 3m RG173 extension cable, 1x flex tripod mount, 1x suction cup mount..

Includes 10 RG402 adapter cables.. SMA Male to SMA, BNC, Type N, Type F, UHF Male Female adapters.. RG402 is a semi-rigid cable. Maintains shape after bending.. Please do not bend too close to the connector to avoid breakage..

Includes 1x RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit. Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. HF reception below 24 MHz in direct sampling mode with reduced performance. Please note RTL-SDR dongles are RX only.. Comes with our portable VHFUHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception..

Includes 1x RTL-SDR Blog brand R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle V3 Dongle Only. Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.. Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth 2.4 MHz stable. HF reception below 24 MHz in direct sampling mode with reduced performance. Please note RTL-SDR dongles are RX only..