DUPLICATE ERASE USB DRIVES Standalone 1 to 2 USB drive duplicator cloner sanitizer Ideal for technicians and IT Pros to manage multiple USB boot drives, wipe USB drives, or quickly share data between teams No Computer required. DRIVE COMPATIBILITY Supports cloningduplication and erasing of USB 3.02.0 flash drives, and external flash media such as SD, microSD using a USB adapter or card reader FCREADMICRO3 sold separately Firmware is upgradeable. DUPLICATION AND ERASE MODES 1.5 GBmin System File Copy FAT1632, NTFS, Linux ext2, ext3, ext4 formats, whole-drive Sector-by-Sector Copy all file formats, Quick Erase, Single-Pass 3-Pass Overwrite DoDNIST SP 800-88 Rev 1 Clear TAA Compliant. LCD MENU DISPLAY Use push button interface to monitor drive info, read write performance, and scan drive for errors and bad sectors Select Copy Compare to verify your cloned drives with source when complete GreenRed LEDs for activityerrors. ASYNCHRONOUS COPY MODE Quickly copy to multiple USB thumb drives using Asynchronous Copy mode w 64 MB internal memory Source content must be under 64 MB Remove your finished drive and insert a new drive to start copying without interruptions.

Read Write distance read 0-180mm ,write 0-80mm tag and environment dependent. Support Protocol ISO18000-6CEPC Gen2 ,ISO18000-6B. Model No. SR3308. Type UHF Passive USB desktop rfid reader writer. Working frequency wide band 860-960MHZ.

Auto Open DoorWireless fob keys or exit button auto activate the automatic swing door,fast and convenient entry. SafeAutomatically re-open door if automatic door opener notices an object in the closing path,make sure safety of the people in the door way,If used for disabled access, it is recommended to install a optional motion safety scanner to extend the re-opening opening time. Easy Parameter AdjustmentLots of parameters such as manually push force can be adjusted on closing force by handheld programmer of ada automatic door. Durable Motor Workable with Input Voltage AC100-AC240The motor is very durable and will not burn out easily due to unstable input voltage because it adopts wide voltage technique,workable with input voltage AC100V to AC240V. Easy InstallationDebugUSA Technical phone support,easy installation and debug.

NOTE Please note it can't be read before you program the chip, it's original chip. Can work before you write on it. IF YOU ARE NOT SURE IF THIS IS APPLICABLE, PLEASE CONTACT US BEFORE PURCHASING. You cannot add them to RFID locks directly. You must write data into them by a 125KHz RFID card writer before use. They are blank tags, no data inside.. Can write in 125khz RFID format and HID WG 125khz format. Not NFC chip, can't work with NFC phone. Suitable for making new and back-up tags. Frequency 125KHz Sensing distance 1 to 7 cm 0.39 to 2.76 inch Data storage life 10 years. Chip T5577 compatible with other universal 125KHz tags.. Writable Rewritable It can be erased and written 100,000 times. Suitable for making new and back-up tags, with the 125KHz RFID card writercopier..

Control 4 doors, get in door by swiping card, and get out door by Infrared button,Can Storedownloadcheck Entry records. Exit button can perfect install on US electrical box.. Control capacity up to 20,000 user up to 100,000 logs. Auto OpenClose at any pre-set time during any day.. Have smart phone APP to open lock remotely for iPhone and Android. Have Desktop USB reader,read card number into software so that easy programmingregister user. Detail video guide and wire diagram make all easily. You can DIY.. Reader is weatherproof. 0.2 second read Speed, 5-10cm Proximity Range.Support who can enter which door at certain time, Authorized access control.. Network communication via TCPIP. Software Supportable Database Access SQL Server. Support Win7Win8Win10Win11 both 32 64 bit ALL Windows system..

Supports Standard Desktop 2.53.5 SATA Hard Drives or SSD. Supports hard drives up to 20TB. Plug and play, no drivers needed.. Supports Offline Cloning up to 60MBps.. Supports Transfer Speeds up to 5Gbps USB 3.0,480Mbps USB 2.0, 12Mbps USB 1.1.

3.2inch HD color screen display, English voice, 4AAA batteries poweredNot included in order, easy to carry, simple operation.br. Muti-frequency 125Khz250KHz375KHz500Khz625KHz750KHz875KHz1000Khz13.56Mhz125Khz Proximity Mode, can read TK4100EM4100EM4200Classic 1K125Khz Proximity card, can write T5577EM430513.56Mhz ISO14443A UID changeable card.br. It can used to copy low level 13.56Mhz ISO14443A encrypted access control card by using our decoding software. But higher level encryption card like hotel card, credit card, bank card...can not be copied.br. We provide some keys, anti-metal sticker and card for you to copy. Before using the them, please note the frequency of them is 12KHz or 13.56MHz..br. If you are not sure if your card can be copied, please contact with us before buying the copier, avoid to wasting your time.br.

MSR605X Reader Writer Encoder All 123 Tracks. Work USE USB Power Supply. Functions Read,Write, Copy, Erase, Edit.. Free 20pcs Blank Cards.

Package Dimensions 2.4 cms L x 9.9 cms W x 2.4 cms H. Product Type Memory Reader. Package Quantity 1. Country Of Origin China.

6' USB Smart Cable part No. CN8000 is included. Can read any government issued ID card with magnetic stripe information andor 2D barcodes. This approach to scanning both magstripe and 2D information with one device is an ideal solution for the POS, ID authentication and law enforcement environment. In addition to the standard side access USB cable interface connector, the Model 260 has incorporated a bottom mounted interface connector, making it an ideal solution for kiosk application environments. Data is transferred to the host device via a standard USB interface or RS-232.

Easy reading and writing no need to connect computer software, one-key reading and writing, automatic identification of card model and frequency, accurate operation prompts.. Excellent decryption performance realize efficient decryption, editing, analysis, etc., and also support special functions such as card package and one-key encryption.. ID IC full frequency range support 13.56MHz, 125KHz, 175KHz, 250KHz, 300KHZ, 375KHZ, 500KHz, etc. The front and rear dual induction areas are more compatible the front induction area only supports IC frequency.. Independent NFC simulation function not only supports reading and writing of proximity cards, but also allows mobile phones, bracelets and other NFC-enabled devices to simulate encrypted IC cards with one key, allowing you to go out without a card.. Rewritable Realize the IC card M1 to restore the default key, clear all data used by the CUID card, this function can realize repeated erasing and rewriting. Connect your computer and mobile phone for quick upgrades..

ONLY duplicates onto Keysy branded rewritable KeycardsKeyfobs one included.. Copy up to 4 RFID Key Fobs or Key Cards 125kHz into the Keysy Remote.. Keysy can then emulate these credentials when placed in front of RFID reader.. Save time, money and avoid dealing with the building management. Additional Rewritable Key Fobs sold separately.. NOTE If you are not sure if your key fob is compatible contact Tiny Labs before purchasing..

NVMe M.2 SSD Offline Cloner- No need for any computer or laptop, our NVMe enclosure helps you clone the old SSD quickly. Only just take 10mins to clone 500G SSD from Source SSD to Target SSD, saving your time to backup the SSD data.NOTES Make Sure the capacity of The Target NVME M.2 SSD is larger than or equal to The Sources'.Please Back up the Data on the target disk before cloning to avoid losing important data.. 10Gbps Extreme Speed- This 2 in 1 M.2 duplicator is applicable to sizes 22302242 2260 2280 NVMe M.2 drivers. M.2 Enclosure Reader reaches up to 10 Gbps high speed for NVME M.2 through USB 3.1 Gen 2, a perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds. NVMe SSD is not included. Not support SATA SSD. Excellent Heat Dissipation System-M.2 Adapter adopts a classic black design, is durable, can quickly dissipate heat, and protects the hard disk when in use. The auto cooling fan can cool the SSD quickly, which starts running after the transfer files 10 seconds and cuts off after finishing the transfer 10 seconds.. Tool Free Design- Only 10 seconds to install, This NVME M.2 SSD Enclosure allows quick and easy installation of your NMVe M.2 SSDs.One Button can achieve clone, PLUG PLAY, perfect for first-time users. Note The first time you use m.2 solid-state drive SSD, you need to format the disk.. Type C interface- Both sides can be inserted USB-C Gen 2 10Gbps Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps. Compatible Multi OS, Windows 7 8 8.1 10 Linux MAC.Blue Indicator shows the data transfer status, easy and clear. 12V DC Power Adapter is included..

RFID Reader WriterYou will get 1 x RFID Copier Without Battery, 6 x Writable Key Tags, 6 x Writable Cards EM4305, 1 x User Munual. The RFID Copier Size Approx. 11.5 x 7 x 3cm 4.6 x 2.8 x 1.2in.. Supports Frequency Reading and WritingPlease note that this card readerwriter only supports 125Khz EM4100 EM410X cards or tags. Copy Times 20,000 Times. Adopting advanced chip, product integration is higher, more stable and reliable. Supports Frequency Reading and WritingPlease note that this card readerwriter only supports 125Khz EM4100 EM410X cards or tags. Copy Times 20,000 Times. Adopting advanced chip, product integration is higher, more stable and reliable.. Easy to UseOnly Read and Write two buttons, easy to operate. Excellent program algorithm and circuit design reduce the power consumption and prolong battery life,2 x AAA battery is needed Battery is not included in the package.. Widely UsesThis device is used to copy and duplicate the 125 Khz EM4100 ID Card for backup purpose. Excellent program algorithm and circuit design are adopted. You can copy all IDEM4100 Cards with this RFID copier. Portable size, easy to carry..

MAIN FUNCTIONS This kit can achieve efficient decryption, editing, analysis, etc., and also supports functions such as card packets and one key encryption.. FULL FREQUENCY Supports ID IC full frequency band, 13.56MHz, 125KHz, 175KHz, 250KHz, 300KHz, 375KHz, 500KHz and other frequencies.. NFC SIMULATION Independent NFC simulation function, allowing devices with NFC function to simulate encrypted IC cards with one button.. APP CONNECTION The card duplicator can be connected to a computer or phone for quick upgrade with just one key support for Android and for Harmony.. BUILT IN BATTERY The card reader has built in 400mah lithium battery, support Type C comm and power supply, making it convenient and practical..