COMPATIBILITY Fits 2011-2018 Ram 1500 2019-2021 Ram 1500 2019-2019 Ram 1500 Classic 2020-2023 Ram 1500 Classic 2009-2010 Dodge Ram 1500. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. COMPLETE, EASY-TO-INSTALL SOLUTION -- Easy to install with an upper mounting plate, this complete solution includes everything you need for strut replacement without the need for a spring compressor. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves on- and off-road handling and performance. RESTORES RIDE HEIGHT -- Precisely calibrated, each application-specific coil spring is fit checked, ride tested and engineered to restore factory ride height. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a nitro-carburized piston rod to reduce scuffs rust, double-welded loops at stress areas, application-specific sintered iron piston for enhanced structural integrity and polyvinyl protective boot. REDUCES FADE -- Nitrogen gas pressurized to 60 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

Vehicle Fitment-1 Compatible with Chevrolet Silverado 1500 RWD 1999-2006, Silverado 1500 2007-2022, Silverado 1500 Classic RWD 2007-2007, Silverado 2500 HD 2011-2023, Silverado 3500 HD 2011-2023, Suburban 2015-2019, Suburban 1500 2012-2014. Vehicle Fitment-2 Compatible with GMC Sierra 1500 RWD 1999-2006, Sierra 1500 2007-2022, Sierra 1500 Classic RWD 2007-2007, Sierra 2500 HD 2011-2023, Sierra 3500 HD 2011-2023, Yukon 2012-2020, Yukon XL 2015-2020, Yukon XL 1500 2012-2014. Vehicle Fitment-3 Compatible with Dodge Ram 1500 1994-2001, Ram 3500 RWD 1994-2002 Compatible with Jeep Gladiator 2020-2022 Compatible with Nissan Titan 4WD 2004-2015, 2017-2022. Specifications ?Location Rear Left and Right, Driver and Passenger Side Extended Length 24.24 Collapsed Length 14.88 Stroke 9.36 Upper Mount 14mm I.D. x 1.66 long sleeve Lower Mount 14mm I.D. x 1.66 long sleeve. Reference Number 43181, 58600, 58636, 43163, 51930.

COMPATIBILITY Fits2011-2013 Ram 2500 2014-2024 Ram 2500 2014-2021 Ram 2500 2014-2020 Ram 2500 2014-2019 Ram 2500 2014-2018 Ram 2500 2016-2024 Ram 2500 2021-2024 Ram 2500 2023-2024 Ram 2500 2011-2013 Ram 3500 2014-2019 Ram 3500 1994-2001 Dodg. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. PRECISE HANDLING AND PERFORMANCE -- Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on- and off-road. STRONG AND DURABLE -- Features a 14mm hardened chrome piston rod to reduce scuffs and corrosion, double-welded loops at stress areas, double-strength closure method, and hot form reserve tube. HANDLES EXTREME TEMPERATURE CHANGES -- Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. REDUCES FADE -- Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade. SMOOTH PERFORMANCE -- Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. THE RIGHT FIT -- Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware. KEEPS DIRT AND DEBRIS OUT -- Sealing system with integrated dirt wiper helps keep moisture and debris from being ingested into the shock and contaminating the oil and damaging the internal seal. BUILT TO LAST -- Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling for extra protection, purchase shock boot RS1952 or RS1961.

COMPATIBILITY Fits 2019-2019 Chevrolet Silverado 1500 LD 2014-2018 Chevrolet Silverado 1500 2019-2019 GMC Sierra 1500 Limited 2014-2018 GMC Sierra 1500. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. COMPLETE, EASY-TO-INSTALL SOLUTION -- Easy to install with an upper mounting plate, this complete solution includes everything you need for strut replacement without the need for a spring compressor. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves on- and off-road handling and performance. RESTORES RIDE HEIGHT -- Precisely calibrated, each application-specific coil spring is fit checked, ride tested and engineered to restore factory ride height. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a nitro-carburized piston rod to reduce scuffs rust, double-welded loops at stress areas, application-specific sintered iron piston for enhanced structural integrity and polyvinyl protective boot. REDUCES FADE -- Nitrogen gas pressurized to 60 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

COMPATIBILITY Fits 1987-2006 Jeep Wrangler 2007-2009 Jeep Wrangler 1997-2006 Jeep TJ 2007-2007 Chevrolet Silverado 2500 HD Classic 2007-2007 Chevrolet Silverado 1500 HD Classic 2002-2006 Chevrolet Avalanche 2500 2001-2006 Chevrolet Silverado 1500. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue. ACCOMMODATES LARGER TIRES -- Engineered for vehicles with oversized wheels and tires. ENGINEERED TO LAST -- Features protective boot to safeguard shock rod and oil seal. HANDLES EXTREME TEMPERATURE CHANGES -- Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

Improved Handling Performance Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. Minimizes Rough Ride Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. Strong Durable Features a 16mm nitro-carburized piston rod to resist scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. Handles Extreme Temperature Changes Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. Vehicle Compatibility This fits your 1984-2001 Cherokee, 1993-2004 Grand Cherokee, 1997-2006 TJ Wrangler with 0 Lift and 1992-1999 C1500 C2500 Suburban with 4 Lift.

Part Number RS55297. Rear pair of 2 shocks for vehicles w5-6 rear lift These parts fit Classic SilveradoSierra 1500 models only Will not work on non-Classic models, which require front struts. Excludes HD Models. Fits 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

COMPATIBILITY Fits2007-2007 Chevrolet Silverado 2500 HD Classic 2007-2007 Chevrolet Silverado 3500 Classic 2007-2007 Chevrolet Silverado 1500HD Classic 2016-2019 Chevrolet Suburban 3500 HD 2002-2006 Chevrolet Avalanche 2500 2001-2006 Chevrolet Si. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. PRECISE HANDLING AND PERFORMANCE -- Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on- and off-road. STRONG AND DURABLE -- Features a 14mm hardened chrome piston rod to reduce scuffs and corrosion, double-welded loops at stress areas, double-strength closure method, and hot form reserve tube. HANDLES EXTREME TEMPERATURE CHANGES -- Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. REDUCES FADE -- Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade. SMOOTH PERFORMANCE -- Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. THE RIGHT FIT -- Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware. KEEPS DIRT AND DEBRIS OUT -- Sealing system with integrated dirt wiper helps keep moisture and debris from being ingested into the shock and contaminating the oil and damaging the internal seal. BUILT TO LAST -- Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling for extra protection, purchase shock boot RS1952 or RS1961.

COMPATIBILITY Fits 1966-1966 Ford Bronco 1967-1977 Ford Bronco 1978-1979 Ford Bronco 1980-1996 Ford Bronco 1975-1991 Ford E-250 Econoline 1975-1991 Ford E-250 Econoline Club Wagon 1975-1991 Ford E-350 Econoline 1977-1991 Ford E-350 Econoline Club. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs rust, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits2018-2020 Jeep Wrangler 2021-2024 Jeep Wrangler. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits2005-2009 Toyota Tacoma 2005-2005 Toyota Tacoma 2006-2006 Toyota Tacoma 2007-2009 Toyota Tacoma 2010-2015 Toyota Tacoma 2016-2016 Toyota Tacoma 2017-2020 Toyota Tacoma 2021-2021 Toyota Tacoma 2022-2023 Toyota Tacoma. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system. EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation. LEVELS FRONT SUSPENSION -- Reduces factory rake for an aggressive stance. INCREASED GROUND CLEARANCE -- Provides 2-in. of additional lift to accommodate up to 285x70x17 tires for a custom look and increased ground clearance lift height varies depending upon application. NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression and long-lasting premium liquid metallic finish and polyvinyl protective boot ensure long life. REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

COMPATIBILITY Fits2014-2014 Ford F-150 2015-2016 Ford F-150 2017-2020 Ford F-150. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system. EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation. LEVELS FRONT SUSPENSION -- Reduces factory rake for an aggressive stance. INCREASED GROUND CLEARANCE -- Provides 2.25-in. of additional lift to accommodate up to 275x65x20 tires for a custom look and increased ground clearance lift height varies depending upon application. NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression and long-lasting premium liquid metallic finish and polyvinyl protective boot ensure long life. REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

COMPATIBILITY Fits1994-2001 Dodge Ram 1500 2000-2001 Dodge Ram 1500 1994-1996 Dodge Ram 2500 2007-2007 Chevrolet Silverado 1500Classic 2019-2019 Chevrolet Silverado 1500LD 1999-2006 Chevrolet Silverado 1500 2007-2013 Chevrolet Silverado 1500 2. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits2011-2018 Ram 1500 2019-2021 Ram 1500 2019-2023 Ram 1500 Classic 2009-2010 Dodge Ram 1500. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits2007-2007 Chevrolet Silverado 1500Classic 2002-2006 Chevrolet Avalanche 1500 1999-2005 Chevrolet Silverado 1500 2006-2006 Chevrolet Silverado 1500 2000-2006 Chevrolet Suburban 1500 2000-2000 Chevrolet Tahoe 2001-2006 Chevrolet. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. PRECISE HANDLING AND PERFORMANCE -- Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on- and off-road. STRONG AND DURABLE -- Features a 14mm hardened chrome piston rod to reduce scuffs and corrosion, double-welded loops at stress areas, double-strength closure method, and hot form reserve tube. HANDLES EXTREME TEMPERATURE CHANGES -- Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. REDUCES FADE -- Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade. SMOOTH PERFORMANCE -- Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. THE RIGHT FIT -- Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware. KEEPS DIRT AND DEBRIS OUT -- Sealing system with integrated dirt wiper helps keep moisture and debris from being ingested into the shock and contaminating the oil and damaging the internal seal. BUILT TO LAST -- Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling for extra protection, purchase shock boot RS1952 or RS1961.

COMPATIBILITY Fits 2004-2004 Ford F-150 2005-2008 Ford F-150 2009-2009 Ford F-150 2010-2014 Ford F-150 2015-2016 Ford F-150 2017-2019 Ford F-150 2006-2008 Lincoln Mark LT. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. NINE LEVELS OF PERFORMANCE -- Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility. DESIGNED FOR HARDWORKING VEHICLES -- Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road. INDUSTRY FIRST -- Recognized as the first nine-position manually adjustable shock series in the off-road market. REDUCES FADE -- Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. STRONG AND DURABLE -- Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity. HANDLES EXTREME TEMPERATURE CHANGES -- Up to 2.75-in. tri-tube body application specific filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life.

COMPATIBILITY Fits 1961-1967 Dodge D100 Series 1961-1967 Dodge D200 Series 1961-1967 Dodge W100 Series 1961-1967 Dodge W200 Series 1976-1980 Dodge D100 Panel 1975-1989 Dodge D100 1977-1993 Dodge D150 1975-1980 Dodge D200 1981-1993 Dodge D250 19. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. NINE LEVELS OF PERFORMANCE -- Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility. DESIGNED FOR HARDWORKING VEHICLES -- Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road. INDUSTRY FIRST -- Recognized as the first nine-position manually adjustable shock series in the off-road market. REDUCES FADE -- Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. STRONG AND DURABLE -- Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity. HANDLES EXTREME TEMPERATURE CHANGES -- Up to 2.75-in. tri-tube body application specific filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life.

COMPATIBILITY Fits1994-2001 Dodge Ram 1500 1994-1999 Dodge Ram 1500 2000-2001 Dodge Ram 1500 1994-2002 Dodge Ram 2500 1994-1996 Dodge Ram 2500 2015-2020 Chevrolet Suburban 2016-2019 Chevrolet Suburban 2007-2007 Chevrolet Silverado 1500Classic. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. PRECISE HANDLING AND PERFORMANCE -- Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on- and off-road. STRONG AND DURABLE -- Features a 14mm hardened chrome piston rod to reduce scuffs and corrosion, double-welded loops at stress areas, double-strength closure method, and hot form reserve tube. HANDLES EXTREME TEMPERATURE CHANGES -- Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. REDUCES FADE -- Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade. SMOOTH PERFORMANCE -- Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. THE RIGHT FIT -- Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware. KEEPS DIRT AND DEBRIS OUT -- Sealing system with integrated dirt wiper helps keep moisture and debris from being ingested into the shock and contaminating the oil and damaging the internal seal. BUILT TO LAST -- Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling for extra protection, purchase shock boot RS1952 or RS1961.

COMPATIBILITY Fits 2011-2023 Chevrolet Silverado 2500 HD 2011-2023 Chevrolet Silverado 3500 HD 2014-2019 Chevrolet Silverado 3500 HD 2014-2014 Chevrolet Silverado 3500 HD 2011-2023 GMC Sierra 2500 HD 2011-2023 GMC Sierra 3500 HD 2014-2019 GMC Sier. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. PRECISE HANDLING AND PERFORMANCE -- Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on- and off-road. STRONG AND DURABLE -- Features a 14mm hardened chrome piston rod to reduce scuffs and rust, double-welded loops at stress areas, double-strength closure method, and hot form reserve tube. HANDLES EXTREME TEMPERATURE CHANGES -- Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. REDUCES FADE -- Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade. SMOOTH PERFORMANCE -- Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. THE RIGHT FIT -- Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware. KEEPS DIRT AND DEBRIS OUT -- Sealing system with integrated dirt wiper helps keep moisture and debris from being ingested into the shock and contaminating the oil and damaging the internal seal. BUILT TO LAST -- Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling for extra protection, purchase shock boot RS1952 or RS1961.

Front Pair of Struts Springs Rear Pair of Shocks - compatible with 4WD Vehicles at factory height or 0-2 Front Lift,0-1 Rear Lift. Front height not adjustable from specified height. 9 settings of compression,dampening adjustment. Shock boots included with RS5000X shocks.. Twin tube nitrogen-gas charged design, suitable for offroad use, towing,,heavier loads.. All necessary washers, bushings,,nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects,premature failure. Rancho's limited lifetime warranty protects against defects,premature failure. RS9000XL series shocks include a 90-day ride guarantee..

Rear Pair of Shocks - compatible with 4WD Vehicles at factory height or 0-1 Rear Lift. Twin tube nitrogen-gas charged design, suitable for offroad use, towing, and heavier loads.. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Includes TrendsAuto Decal Sticker.

COMPATIBILITY Fits1961-1967 Dodge W100 Series 1961-1967 Dodge W200 Series 1982-1982 Dodge D50 1983-1986 Dodge Power Ram 50 1987-1989 Dodge Raider 1983-1991 Dodge Ram 50 1968-1971 Dodge W100 Pickup 1968-1971 Dodge W200 Pickup 1969-1973 Jeep Comm. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits 1994-2001 Dodge Ram 1500 2000-2001 Dodge Ram 1500 1994-1996 Dodge Ram 2500 2007-2007 Chevrolet Silverado 1500 Classic 2019-2019 Chevrolet Silverado 1500 LD 2022-2022 Chevrolet Silverado 1500 LTD 1999-2006 Chevrolet Silverado 151. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. PRECISE HANDLING AND PERFORMANCE -- Deflective Disc Valving features digressive, linear or progressive turning based on application requirements for precision handling and performance on- and off-road. STRONG AND DURABLE -- Features a 14mm hardened chrome piston rod to reduce scuffs and rust, double-welded loops at stress areas, double-strength closure method, and hot form reserve tube. HANDLES EXTREME TEMPERATURE CHANGES -- Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. REDUCES FADE -- Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade. SMOOTH PERFORMANCE -- Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. THE RIGHT FIT -- Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware. KEEPS DIRT AND DEBRIS OUT -- Sealing system with integrated dirt wiper helps keep moisture and debris from being ingested into the shock and contaminating the oil and damaging the internal seal. BOLD APPEARANCE -- Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out.

COMPATIBILITY Fits 1999-2004 Ford F-250 Super Duty 1999-2004 Ford F-350 Super Duty 2008-2016 Ford F-450 Super Duty. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs rust, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits 1994-2001 Dodge Ram 1500 1994-1999 Dodge Ram 1500 2000-2001 Dodge Ram 1500 1994-2002 Dodge Ram 2500 1994-1996 Dodge Ram 2500 2015-2020 Chevrolet Suburban 2016-2019 Chevrolet Suburban 2007-2007 Chevrolet Silverado 1500 Classic. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. NINE LEVELS OF PERFORMANCE -- Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility. DESIGNED FOR HARDWORKING VEHICLES -- Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road. INDUSTRY FIRST -- Recognized as the first nine-position manually adjustable shock series in the off-road market. REDUCES FADE -- Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. STRONG AND DURABLE -- Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity. HANDLES EXTREME TEMPERATURE CHANGES -- Up to 2.75-in. tri-tube body application specific filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life.

Part Numbers RS55319 and RS55777. Set of 2 Shocks 2 Struts for vehicles at factory height or w0 front lift and w0 rear lift. Fits 4WD vehicles Only fits 2WD vehicles w 6 Lugs. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

COMPATIBILITY Fits2020-2020 Jeep Gladiator 2021-2021 Jeep Gladiator 2022-2022 Jeep Gladiator 2023-2023 Jeep Gladiator 2018-2020 Jeep Wrangler 2021-2024 Jeep Wrangler. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

Engineered for vehicles with oversized wheels tires. Reduce wheel shimmy, bump steer and vibration. Universal and direct-fit applications available. White in color. Protective boot included select applications.

COMPATIBILITY Fits 2007-2007 Chevrolet Silverado 1500 Classic 2002-2002 Chevrolet C1500 1999-2005 Chevrolet Silverado 1500 2006-2006 Chevrolet Silverado 1500 1999-2004 Chevrolet Silverado 2500 2007-2007 GMC Sierra 1500 Classic 1999-2005 GMC Sierra. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. NINE LEVELS OF PERFORMANCE -- Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility. DESIGNED FOR HARDWORKING VEHICLES -- Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road. INDUSTRY FIRST -- Recognized as the first nine-position manually adjustable shock series in the off-road market. REDUCES FADE -- Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. STRONG AND DURABLE -- Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity. HANDLES EXTREME TEMPERATURE CHANGES -- Up to 2.75-in. tri-tube body application specific filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life.

Complete Set This set comes with 2 front RS9000XL Struts and 2 rear RS5000X Suspension Shock Absorbers. Smooth Performance Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride. Strong and Durable Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity. Built to Last Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures long life. Buy with Confidence Both the RS9000XL Struts and the RS5000X Shocks come with a limited lifetime warranty.

IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

SPRING ASSIST TOWING SHOCKS Gabriel Load Carrier shocks combine shock absorber and spring technology to help reduce ride height loss under ongoing loaded conditions for towing and hauling applications. UP TO 500 LBS LOAD SUPPORT Variable-rate rear coil springs provide up to 500 lbs of load capacity per pair to help improve stability and maintain ride height while towing or hauling cargo does not increase vehicle payload rating. HEAVY-DUTY CONSTRUCTION Drawn-Over-Mandrel D.O.M. pressure cylinder reduces internal wear, while the chromed piston rod helps resist corrosion and provides consistent sealing performance. LEAK-RESISTANT DESIGN Engineered with a leak-proof piston seal to help extend shock life and maintain dependable ride control under demanding towing and hauling conditions. FITMENT Fits select Chevrolet Silverado, Tahoe, Suburban, GMC Sierra, Yukon, Dodge Ram, Jeep Gladiator and Nissan Titan applications verify compatibility using Amazon Confirmed Fit before purchase..

COMPATIBILITY Fits2000-2006 Toyota Tundra 2001-2007 Toyota Sequoia. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system. EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation. LEVELS FRONT SUSPENSION -- Reduces factory rake for an aggressive stance. INCREASED GROUND CLEARANCE -- Provides 2.25-in. of additional lift to accommodate up to 285x60x18 tires for a custom look and increased ground clearance lift height varies depending upon application. NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression and long-lasting premium liquid metallic finish and polyvinyl protective boot ensure long life. REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

COMPATIBILITY Fits2014-2014 Ford F-150 2015-2016 Ford F-150 2017-2020 Ford F-150. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system. EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation. LEVELS FRONT SUSPENSION -- Reduces factory rake for an aggressive stance. INCREASED GROUND CLEARANCE -- Provides 2.5-in. of additional lift to accommodate up to 295x60x20 tires for a custom look and increased ground clearance lift height varies depending upon application. NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression and long-lasting premium liquid metallic finish and polyvinyl protective boot ensure long life. REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

COMPATIBILITY Fits2018-2018 Jeep Wrangler JK 2010-2017 Jeep Wrangler. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue. ACCOMMODATES LARGER TIRES -- Engineered for vehicles with oversized wheels and tires. ENGINEERED TO LAST -- Features protective boot to safeguard shock rod and oil seal. HANDLES EXTREME TEMPERATURE CHANGES -- Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. BUY WITH CONFIDENCE -- Comes with Ranchos Limited Lifetime Warranty.

Part Number RS55297. Rear pair of 2 shocks for vehicles w4 rear lift wRS6572, RS6572B, RS6573 or RS6573B System. Fits 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

Part Number RS55254. Rear pair of 2 shocks for vehicles at factory height or w0-2 rear lift. Fits 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

Part Number RS55324. Rear pair of 2 shocks for vehicles at factory height or w0 rear lift Rear shock hardware not included, original factory rubber bushings and steel washers are reused for installation. Fits 2WD 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

COMPATIBILITY Fits 1984-2001 Jeep Cherokee 1986-1992 Jeep Comanche 1993-1998 Jeep Grand Cherokee 1999-2001 Jeep Grand Cherokee 1997-2006 Jeep Wrangler 1997-2006 Jeep TJ. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs rust, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

COMPATIBILITY Fits 2001-2005 Ford Explorer Sport Trac 1995-2001 Ford Explorer 1998-2011 Ford Ranger 1997-2001 Mercury Mountaineer 1999-2001 Mazda B2500 1998-2002 Mazda B3000 2003-2007 Mazda B3000 1998-2010 Mazda B4000. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. IMPROVED HANDLING AND PERFORMANCE -- Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road. MINIMIZES ROUGH RIDE -- Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. STRONG AND DURABLE -- Features a 16mm nitro-carburized piston rod to reduce scuffs rust, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot. HANDLES EXTREME TEMPERATURE CHANGES -- Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F. SMOOTH PERFORMANCE -- Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride. REDUCES FADE -- Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming. MAINTAINS VEHICLE CONTROL -- Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control. BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area.

Part Number RS55379. Rear pair of 2 shocks for vehicles w1-2 rear Lift. Fits 2WD 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

10 Stage Variable Valving, Military Fluid Rated To -50 Degrees C. Nitrogen Charged, Rubber Bushings, 36kN Tensile Strength. Fast Cooling 54mm Shock Body. Spring Loaded Piston Rod Seal. Military Spec. Fluid Rated To -40 C. Backed by Rough Country's Limited Lifetime Replacement Warranty..

Improved Handling and Performance - Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road of the 2017 - 2024 F250 F350 Super Duty 4WD with 0 Lift.. Minimizes Rough Ride - Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride.. Strong and Durable - Features a 16mm nitro-carburized piston rod to resist scuffs corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot.. Handles Extreme Temperature Changes - Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248F.. Built to Last - Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area..

Improved Handling Performance Packed with innovative features, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance thanks to Rancho's exclusive Cross Tuned technology. Minimizes Rough Ride Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride. Strong Durable Features a nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and application-specific sintered iron piston for enhanced structural integrity. Buy with Confidence Knowing that Rancho RS5000X series struts and shocks are backed by Ranchos limited lifetime warranty, you can purchase this set with confidence. Vehicle Compatibility These Rancho RS5000X struts and shocks are designed to fit 2020-2023 Silverado 1500 LTZ 2020-2023 Sierra 1500 SLT with 0 lift.

Front Pair of Struts Springs Rear Pair of Shocks - compatible with 2WD 4WD Vehicles at factory height or 0-2 Front Lift and 0-1 Rear Lift Excl. Electronic Suspension, 4 Wheel Steering, ZW7 Self-Leveling Nivomat Suspension. Front height not adjustable from specified height. 9 settings of compression and dampening adjustment. Shock boots included with RS9000XL shocks.. Twin tube nitrogen gas charged design with 9 settings of compression dampening adjustment.. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's limited lifetime warranty protects against defects and premature failure. RS9000XL series shocks include a 90-day ride guarantee..

Shock Kit-2 Front 2 Rear. Rancho RS5000 shocks. FITS 2000-2006 SUBURBAN TAHOE AVALANCHE YUKON XL 2WD 4WD.

RS5000X Front and Rear Shock Absorbers. Progressive Engagement Valving Tuned Compression Control Valve Enlarged 2-14-inch Twin Tube Body Gas Pressurization of Shock. 16 mm Nitro-Carburized Rod Full-Displaced 35 mm Bore 1-38-inch Diameter Sintered Iron Piston Rebound Bumper. Black, Natural Rubber Bushings Low-Friction, Self-Lubricating Seal Protective Boot Glass-Filled, Fluon Banded Piston Double-Welded Loops. Includes TrendsAuto Decal Sticker.

Part Numbers RS55274 and RS55288. Set of 4 Shocks for vehicles at factory height or w0 front lift and w0 rear lift 9200 GVW. Excl. Autoride Air Leveling. Fits 2WD 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

Part Number RS55198. Rear pair of 2 shocks for vehicles at factory height or w0-2.5 rear lift Excludes HD Models. Fits 2WD 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

Part Numbers RS55326 and RS55328. Set of 4 Shocks for vehicles at factory height or w0-2 front lift and w0-2 rear lift. Fits 4WD vehicles. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.. Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's 90 day ride guarantee covers RS5000X, RS7000MT, and RS9000XL shocks..

Compatible with 2008-2015 F-250 2008-2015 F-350. Kit Includes Two 2 of Part Number RS55042 - Rancho RS5000X Shock Absorber Two 2 of Part Number RS55254 - Rancho RS5000X Shock Absorber One 1 of Part Number RS5415 Rancho RS5000 Steering Damper. Part RS55042 Details Front Fitment Compressed Length 13.85 Extended Length 20.79 Lower Mounting Loop Bushing and Sleeve Mount Upper Mounting Stem Mount Extended Bumper Stop Yes Compressed Bumper Stop No Extended Hydraulic Lockout No Twin tube internal design Gas Pressurization of shock Dust Shield Included Limited Lifetime Warranty. Part RS55254 Details Rear Fitment Compressed Length 18.26 Extended Length 30.83 Lower Mounting Loop Bushing and Sleeve Mount Upper Mounting Loop Bushing Mount Extended Bumper Stop Yes Compressed Bumper Stop No Extended Hydraulic Lockout No Twin tube internal design Gas pressurization of shock Dust Shield Included Limited Lifetime Warranty. Part RS5415 Details Fits models with OEM Steering Dampers Mounts Extended Length 27.86 Compressed Length 16.08 Lower Mounting Code L1 Upper Mounting Code LS26 Not Extended Bumper Stop Travel Length 11.78 Not Compressed Dust Shield Included Engineered for Vehicles with Oversized Wheels and Tires Limited Lifetime Warranty.

Includes front QuickLIFT Loaded Strut Assemblies and rear RS9000XL Shocks.. Levels front suspension.. 9-position tuning technology.. DOES NOT FIT WITH AIR SUSPENSION OR MEGA CAB. Limited lifetime warranty.