The ball base designed to fit into the cylindrical or hexagonal bore wall of motorcycle fork stems. Suitable for stem tube holes 12mm to 25.4mm in diameter. Package comes with two sizes of metal spacers. Small size spacer fit for tube 12mm to 18.5mm in diameter, Large size spacer fit for tube 18.5mm to 25.4mm in diameter. You can choose one size of the spacers according to the tube diameter for installation. It is not supported to use two spacers of different size at the same time. The metal motorcycle fork stem base included B size 1 TPU ball allows for connection to RAM MOUNTS BRCOVAN any B size double socket arm. PRE-INSTALL CHECK Measure tube diameter, select and fit the correct spacer before installing the ball base. Support minimum tube depth 38mm. ANTI-THEFT DESIGN The bolt head of the fork stem ball base has a specially designed screw groove, and the package comes with a special wrench for tightening or loosening the bolt. Adds extra security to equipment attached to this stem base. EASY TO INSTALL After select and fit the correct spacer, install the ball base. Step 1, insert the ball base into the motorcycle fork stem tube. Step 2, use the special wrench included with the package to tighten the bolt of the ball base clockwise. Installation Complete.

The anti-theft double socket arm made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.. With anti-theft knob design. Package come with a special wrench to adjust this secure knob. This design prevents the device attached to the double socket arm from being easily removed. Provides extra security for your device. The secure knob of double socket arm made of PA66GF30 material.. Short Arm Overall length 2.36 inch 60mm.. Compatible with RAM Mounts BRCOVAN any B size 1 inch ball components, including mounting bases and device holders.. Suitable for other 1 ball device mounts, such as bike phone mounts, motorcycle phone holders, action camera mounts, navigation mounts, marine electronic mounts, etc..

Lifetime WarrantyThe FANAUE brand has been bringing users a good experience since its launch, and we provide a lifetime warranty service. If there is any quality problem with this product of oursplease feel free to contact us, we will solve it for you within 24 hours.. Wide compatibilityThe rod clamp has four 14 screw holes and Detachable 1 Ball,It can be connected to FANAUE DA series Socket Arm and other accessories,Also applicable to RAM products.. Wide range of applicationsThe rod clamp Minimum clamping range of 0.513mm,Maximum clamping range of 2.052mm,When clamping round rod objects, the minimum is 0.5 13mm, and the maximum is 1.5 40mmYou can clamp your equipment within the range,Such as motorcycle handlebars, bicycle handlebars, and other sticks, squares, etc., depending on your equipment.. Strong and sturdyThe rod clamp is Made of aluminum alloy and stainless steel and hard anodized , sturdy and durable which can guarantee your use for different environments.Two rubber pads are built into the clamping position to protect the surface of your device from scratch and provide a more stable clamping .. Easy to installThe spring structure allows you to quickly clamp or loosen your device, you need to shrink the clamp to your desired position by hand, and then you can quickly turn the knob..

1s Lock ReleaseNOTICE The width of the phone clip can be adjusted. Turn the knob counterclockwise to enlarge the width of the phone clip, put your phone in, then turn the knob clockwise to grip your phone. Finally lock the safety lock up to secure your phone firmly. Adjust the width of phone clip to fit for the first time, you can enjoy the fast installation in the future, one hand to quick install and release.. No Block Camera The motorcycle phone mount adopts half enclosure design, doesn't block the phone's camera. Support photo shooting and video recording in cycling. The length of phone clip is 3.74 inches 95 mm, please measure the length from camera to the bottom of the phone to ensure it won't block the camera.. Quick handlebar Clamp The universal bike phone holder has upgraded handlebar clip, makes the installation easier. Press and hold the button on handlebar clip to adjust the clip to fit the handlebar, tighten the screw to fix it. No tools are needed. The handlebar clip is suitable for bike, bicycle, motorcycle, electric scooter, stroller, shopping cart, indoor bike, treadmill. Fit handlebar diameter 0.59 - 1.57 15 - 40mm.. Wide Compatibility This motorcycle phone holder can fits all 2.3 - 3.54 wide phones, like phones diagonal size in 4.7 - 7, such as iPhone 15 14 13 12 11 Pro Max, Pro, Mini, iPhone 15 14 Plus, iPhone Xs Max, Xs, XR, X, iPhone SE, Galaxy S24, S24, S24 Ultra, S23 Ultra S23 S23 S22 S21 S20 and more. The max thickness the phone clip can holds is 0.59.. 360 Rotation SturdyThe adjustable bike cell phone mount comes with 360 degrees rotating ball, allows you to adjust your cellphone to the horizontal or vertical viewing angle during riding. The all-around rubber pads on phone clip protect your phone from scratching and slipping. High quality handlebar clip holds the bar tightly, keep your phone safe and steady on bump road..

The ball base designed to fit into the cylindrical or hexagonal bore wall of motorcycle fork stems. Suitable for tube diameter 12mm to 25.4mm.. Package comes with two sizes spacers. Small size spacer fit for tube 12mm to 18.5mm in diameter, Large size spacer fit for tube 18.5mm to 25.4mm in diameter. You can choose one size of the spacers according to the tube diameter for installation. It is not supported to use two spacers of different size at the same time.. The motorcycle fork stem ball base included B size 1 TPU ball allows for connection to RAM Mounts BRCOVAN any B size 1 inch ball double socket arm. Work for other devices with 1 inch swivel ball mounting pattern. Great for motorcycle phone mounts, tablet mounts, navigation device mounts, rod holders and much more in a wide variety of applications.. PRE-INSTALL CHECK Measure tube diameter, select and fit the correct spacer before installing the ball base. Support minimum tube depth 38mm.. EASY TO INSTALL After select and fit the correct spacer, install the ball base. Step 1, insert the ball base into the motorcycle fork stem tube. Step 2, use the Allen wrench included with the package to tighten the bolt of the ball base clockwise. Installation Complete..

Compatible with RAM mount B Size ball headMotorcycle phone mount compatible with ram accessories, 1 inch ball adapter can be rotated 360, free to adjust the horizontal or vertical direction, the special shape of the cell phone mount won't affect the operation of the cameraportscreenbuttons, the high-quality non-slip rubber wraps the stainless steel ball head, which plays a very good role in protection, and fits the ball joints perfectly, making it more stable safety.. Protection and shock absorptionBike motorcycle phone mount features spring loaded auto retracting structure, anti-loosening knob rotates 180 lock spring loaded mechanism preventing device from loosening, double protection adds extra security to your cell phone mount, Built-in non-slip rubber pad protects smartphone from scratches and provide greater friction, even at high speeds on bumpy roads, you can be sure that your device is securely fastened to the motorcycle bike mount.. Wide compatibilityThe phone holder with 1 inch ball head adapter can be used for bicycles, motorcycles, ATVUTV, scooters, strollers, treadmills and other vehicles, suitable for 5.5-7 inch smartphones, support device thickness of 15mm, such as iPhone 14 13 12 11 ProMax, Samsung Galaxy S21 S22 S21 S22, OnePlus Ace Ace Pro 10 10Pro, Google Mobile, Huawei and other cell phones.. Long service lifeHigh quality cell phone holder with 1 ball head adapter body is made of 6061-T6 aluminum alloy, the surface of III stage hard anodic oxidation treatment, durable anti-corrosion and anti-rust, suitable for a variety of harsh environments, is the motorcycle phone mount, ram phone mount, bike phone holder, kayak phone mount, ball phone mount, ball mount etc for long-term use of the ideal choice.. Easy to install Cell phone holder with 1 inch ball mount fully automatic physical mechanics, strong spring automatically shrinks without adjustment, one-handed operation 1S to complete phone pick and place, tool-free installation is very convenient, the phone clip can be used with handlebar clamp mount base and double socket arm combination into motorcycle bike phone mount in a variety of scenarios to use, enjoy the convenience of the riding journey.. Lifetime warrantyThis phone holder with 1 inch ball head adapter comes with a lifetime warranty, if you have any questions, please feel free to contact us, we will provide you with the best solution within 24H. Phone mount with 1 ball head is an accessory specially designed for bike motorcycle cell phone holder, it's perfect Christmas gift for husband, father or friends, bring them the surprise and fun of assembling bicycle phone mount..

Wireless USB C Charge at the Same Time this motorcycle wireless phone mount charger allows to power mobiles by wireless, and charge camerasMP3MP4 through USB C at the same time. 15W wide wireless circuit built in, this item quickly charges smartphone supporting qi charging 20W USB C output port provides much fast charging speed than conventional USB A socket.. Excellent Fits the motorcycle fork stem phone mount is specially designed to fit into the cylindrical bore wall of fork stems. The motorcycle wireless phone mount fits to fork stem holes with diameter of 0.47-1 12-25.4mm .. 100 Firm Double Socket 1 Balls the motorcycle fork stem phone mount with wireless and USB C charger with stainless steel clamping feet and fork Stem spacer to ensure your mobile phones super stably mounted the composite double socket with RAM B size 1 balls to provide most steady and flexible rotation NEVER DROP 100 SECURE RELIABLE. Auto Clamping Self Locking Quick Release for One-handed Operation this motorcycle qi phone mount charger with clamping arms automatically stretching and releasing design to make people place take out of the phones just in 1 second. It realizes one-handed operation to free your hand while riding.. Wide Compatibility the clamping arms of the motorcycle wireless charger is suitable for 4.0-6.8 large phones.the max. thickness of phone case should be 0.63.. 720 Rotation Water Resistant the unique double socket arm with 1 balls phone mount provides 360 360adjustment to meet different mobile phone angle height requirements design with waterproof caps on switch and USB port to dispel your upset about leaving it outside and make your riding easy even in rainy days.

Standard RAM double socket arm provides an ideal overall length of 3.73 and a socket-to-socket length of 3.

1-inch ball head, compatible with 1-inch phone holders such as RAM and GoPro holders.. It could be clipped on the 0.67-1.57 of rod stick handle grip pole tube hooks shelves plate gun desk chair tripod railing photo studio indoor outdoor etc.. Flexible fixed knob for easy tightening.. ABS material, made of thickened material, will not break..

Sturdy Secure The main body of this motorcycle phone mount is made of PA66GF30 high-strength material, with built-in high-quality 304 stainless steel telescopic rods. Adopts aluminum alloy handlebar mounting base rear-view mirror mounting base. Protective mobile phone holder design The double socket arm handlebar mounting base are equipped with special safety screw. The package comes with a special wrench to tighten the safety screw. This design keeps your phone holder from being easily removed. Anti-shock, protect mobile phone camera Equipped with vibration dampener. The motorcycle handlebar cell phone mount also built-in with soft silicone that keep your phone from scratches and vibration. Handlebar phone mount phone camera features a non-contact designed to keep the phone camera from being squeezed and scratched while riding. Anti Shake, Protect Your Phone The special structure of this motorcycle phone mount can tightly wrap your smartphone. Designed with High-Speed Secure Knob After putting your phone in, tighten the knob on the back of this motorcycle phone mount, make sure your mobile phone is securely attached to the motorcycle phone holder even when riding at high speed on bumpy roads. Easy To Install Accessories included with the package allow this cell phone mount easy to attach to handlebars and rear-view mirror. The motorcycle phone holder handlebar mounting base fit for handlebars 0.5''12mm 0.875''22mm 1.0''25.4mm 1.125''28.6mm 1.26'' 32mm in diameter. Package also includes rear-view mirror mounting base. Convenient for you to install the phone holder on the motorcycle mirror. Adjustable Design, Wide Compatibility The body size of the motorcycle phone holder can be adjusted according to the size of your phone. This Motorcycle Phone Mount Holds Phones Case Included Dimensions Length 5.03'' 128mm - 7.59'' 193mm, Width 2.48'' 63mm - 3.46'' 88mm, Thickness 0.787'' 20mm Max. Compatible with phone screen 5.4''-7.2''. One-Handed Operation Design Put in or take out your phone with just one hand in one second, very convenient. 720 degree free rotation design, can be easy to adjust the mobile phone to horizontal or vertical screen. Enjoy a free and easy riding. Suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV, etc.. Installation Steps Step 1, Install the handlebar base or rear-view mirror base to the motorcycle Step 2, Loosen the special anti-theft screw on the double socket arm, and then loosen the knob of the double socket arm Step 3, Insert both balls simultaneously into the double socket arm Step 4, Install the special anti-theft screw to the double socket arm Step 5, Tighten the knob of double socket arm after adjusting the angle. Installation Complete.

The anti-theft 1'' ball double socket arm made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Designed with anti-theft special screw, and the package come with a special wrench to adjust this special screw. This design prevents the device attached to the dual socket arm from being easily removed. Provides extra security for your device. With an overall length 2.36''. Compatible with RAM Mounts BRCOVAN any B size 1'' ball components, including mounting bases and device holders.. Suitable for other 1 ball device mounts, such as bike phone mounts, motorcycle phone holders, action camera mounts, navigation mounts, marine electronic mounts, etc..

Tool-free installation and removal designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 0.5 to 1.75 in outer diameter. The 1'' ball mount main body made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. TPU over-molded ball head, non-slip and wear-resistant. Aluminum alloy tough-claw with built-in TPU provide stable gripping and protection of mounting surface. This 1 inch ball handlebar clamp mount compatible with RAM Mounts BRCOVAN any B size 1'' ball double socket arm. Work for other devices with 1 inch swivel ball mounting pattern. Perfectly suited for mounting on the yoke of an aircraft, handlebars of bikesbicyclesmotorcyclesstrollersmountain bikesdirt bikestrek bikesroad bikesgolf cartselectric scootersATV, or even on kayak rails and roll bars. Ideal mounting base for phones, tablets, action cameras, rod holders, and much more.

This 1'' ball handlebar clamp mount base accommodates handlebars 0.5 inch 12mm 0.87 inch 22mm 1 inch 25.4mm 1.125 inch 28.6mm 1.26 inch 32mm in diameter. Package come with four soft rubber ring inserts to provide a snug fit and protection of the mounting surface. Rubber ring inserts diameter 0.5''12mm, 0.87''22mm, 1''25.4mm, 1.125''28.6mm. You can add or remove rubber ring according to the diameter of handlebar. When the rubber ring insert is not embedded, the hole diameter of the handlebar mounting base is 1.26 32mm. The handlebar ball mount utilizes rubber-insert and lock-bolt to prevent loosening in high vibration for mounting to motorcycle bike handlebars and rear-view mirror as well as other round rails within the stated dimensions. An Allen key is included with the package to facilitate your installation. Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable. TPU over-molded ball head, non-slip and wear-resistant.. This 1 inch ball handlebar mounting base compatible with RAM Mounts BRCOVAN any B size 1'' ball double socket arms. Work for other devices with 1 inch swivel ball mounting pattern..

The motorcycle brakeclutch reservoir mount base with B size 1 TPU ball. Compatible with RAM MOUNTS BRCOVAN any B size 1 inch ball double socket arm. Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable. TPU over-molded ball head, non-slip and wear-resistant. Hardware Included 2 M6 x 45mm Stainless Steel Hex Bolt, 2 14'' x 1-34 Stainless Steel Hex Bolt, 2 12 Spacers. Check before installation To see if the ball base is compatible with your motorcycle. Check that the dimensions of the two mounting holes on the motorcycle brakeclutch reservoir are compatible with the supplied hex bolts, including the diameter, depth, and center-to-center distance of the two holes. This ball base suitable for hole center distances from 0.98 to 1.45.

Sturdy, Anti Shake The main body of this motorcycle phone mount is made of high-strength composite materials, providing durability and reliability in the most demanding environments. Built-in high-quality industrial springs and a special eight-claw wrapping phone design ensure that your phone is securely fixed on the motorcycle cell phone mount even when driving on bumpy roads.. Easy to Install Equipped with aluminum alloy fork stem mounting base. Accessories included with the package allow this motorcycle phone holder easy to attach to motorcycle fork stem tubes. The fork stem mounting base fit tubes 12mm-25.4mm in diameter.. Anti-Shock, Protect Mobile Phone Camera The motorcycle phone holder is designed with a vibration dampener to minimize the vibration transmitted to the mobile phone while riding. The motorcycle fork stem phone holder also built-in with soft silicone that keep your phone from scratches and vibration. The phone cradle phone camera features a non-contact designed to keep the phone camera from being squeezed and scratched while driving.. Adjustable Design, Wide Compatibility Adjustable width design can accommodate mobile phones of more sizes. The Motorcycle Phone Mount Holds Phones Case Included Dimensions Maximum Width 88mm3.46'', Maximum Length 178mm7'', Maximum Thickness 16mm0.629''. Compatible with phone screen 5.4''7.2''. One-Handed Operation Put in or take out your phone with just one hand in one second, very convenient. 720 degree free rotation design, can be easy to adjust the mobile phone to horizontal or vertical screen. Enjoy a free and easy riding..

Anti-Vibration Design - The iMESTOU motorcycle phone mount is specifically designed with an anti-vibration design that ensures your phone stays stable and secure while riding. This makes it a must-have accessory for any motorcycle enthusiast who wants to stay connected while on the road.. Versatile Compatibility - With a 1 ball head, the bike phone mount is suitable for RAM B size phone mounts or other 1 ball head adapter mounts or accessories. This ensures that it can be easily integrated with other accessories and devices.. Stay Safe While Riding - The anti vibration motorcycle phone holder features a back safety locking knob that ensures your phone stays securely in place even while riding at high speeds, making it safe and convenient for motorcycle riders.. Shock Absorbers Soft Silicone Covered Panel - The 1 ball phone mount comes with four cushioning shock absorbers and a four-claw clamp with a soft silicone panel to prevent scratches. This ensures that your phone stays safe and protected while in use.. Compatible with a Wide Range of Phones - The motorcycle ball mount is compatible with 4.7-7.2 inch phones, with adjustable width and a hexagonal screwdriver for adjusting the arm width to fit different phone sizes. This makes it a versatile option that can be used with a variety of smartphones.. Easy to Use - The motorcycle phone mount can be operated with one hand and has a one-click quick automatic locking and release system. To release your phone, simply push the top of the mount and the bracket will automatically release. This makes it a convenient and user-friendly option for motorcycle riders.. High-Quality Material - The panel of the mount is made of 6061-T6 aluminum alloy material, giving it a sturdy structure and a high-end appearance. It is durable and long-lasting, making it a reliable choice for motorcycle enthusiasts.. Fits- This motorcycle phone mount with vibration dampers fits for phones with case max. size 88mm width 16mm thickness..

New arrived motorcycle fork stem phone mount This motorcycle fork stem phone mount fit for install in fork stem or Triple Tree Stem Yoke Center hole, fit for tube hole 12-25.4mm in diameter, package come with two spacer, small spacer suits tube hole 12-18.5mm, large spacer suits tube hole 18.5-25.4mm, Compatible with most of BMW, Ducati, Suzuki, Yamaha, Kawasaki, CBR CBR motorcycle. Sturdy and Safe A special shape design of this motorcycle phone mount can be wrapping four corners of your cell phone tightly, Adopts stainless steel telescopic arms, TPU ball and stainless steel fork stem, super sturdy The motorcycle fork stem mount holds your phone perfectly even riding on a bumpy road. Shockproof Protection The motorcycle phone holder also built-in with soft silicone that keep your phone from scratches and vibration, Phone bike mount phone camera features a non-contact designed to keep the phone camera from being squeezed and scratched while riding. One-handed Operation The motorcycle fork stem phone holder adopts one-push automatically lock and quick release design, Put in or take out your phone with just one hand in one second, very convenient. 360 degree free rotation design, can be easy to adjust the mobile phone to horizontal or vertical screen. Enjoy a free and easy riding. Wide Compatibility The motorcycle fork stem phone mount compatible with 4.0 -6.9'' cellphone, Fit for mobile phone thickness less than 16 mm.

Professional shock absorption moduleMotorcycle phone mount equipped with professional mobile phone holder shock absorber, features spring loaded auto retracting structure, anti-loosening knob rotates 180 lock spring loaded mechanism preventing device from loosening, double protection adds extra security to your phone mount, avoiding damage to device due to large vibrations, anti-loosening knob makes your smartphone firmly fixed in the phone holder, make your riding more safer reliable.. Compatible with RAM mount B Size ball headMotorcycle phone mount compatible with ram accessories, 1 inch ball adapter can be rotated 360, free to adjust the horizontal or vertical direction, the special shape of the cell phone mount won't affect the operation of the portscreenbuttons, the high-quality non-slip rubber wraps the stainless steel ball head, which plays a very good role in protection, and fits the ball joints perfectly, making it more stable safety.. Wide compatibilityPhone mount with 1 ball mount built-in non-slip rubber pad protects phone from scratches and provide greater friction, bike phone holder can be used for ATVUTV, scooters, strollers, treadmills and other car accessories, support device thickness of 15mm for 5.5-7 phone, such as iPhone 14 13 12 ProMax, Galaxy S21 S22, OnePlus Ace 10 Pro and other phones, even at high speeds on bumpy roads, you can be sure that your device is securely fastened to the motorcycle bike mount.. Long service lifeHigh quality cell phone holder with 1 ball head adapter body is made of 6061-T6 aluminum alloy, the surface of III stage hard anodic oxidation treatment, durable anti-corrosion and anti-rust, suitable for a variety of harsh environments, is the motorcycle phone mount, ram phone mount, bike phone holder, kayak phone mount, ball phone mount, ball mount etc for long-term use of the ideal choice.. Easy to install Cell phone holder with 1 inch ball mount fully automatic physical mechanics, strong spring automatically shrinks without adjustment, one-handed operation 1S to complete phone pick and place, tool-free installation is very convenient, the phone clip can be used with handlebar clamp mount base and double socket arm combination into motorcycle bike phone mount in a variety of scenarios to use, enjoy the convenience of the riding journey.. Lifetime warrantyThis phone holder with 1 inch ball head adapter comes with a lifetime warranty, if you have any questions, please feel free to contact us, we will provide you with the best solution within 24H. Phone mount with 1 ball head is an accessory specially designed for bike motorcycle cell phone holder, it's perfect Christmas gift for husband, father or friends, bring them the surprise and fun of assembling bicycle phone mount..

CASE MOUNT COMPATIBILITY Compatible with all Rokform Twist Lock Cases or Rokform Universal Adapter and 1 RAM Socket Mount.. MOUNT SECURITY Keeps phone secure with patented RokLock Twist Lock, aluminum lock, and lever arm. Includes safety lanyard for additional security on and off the bike.. UNIVERSAL MOUNT COMPOSITION Constructed of durable, CNC machined, 6061 T-6 military-grade aluminum to stand up to years of daily use and abuse.. PACKAGED CONTENTS Rokform Universal Ball Adapter Phone Mount and 1 safety lanyard. Does NOT include RAM mount, phone, or case.. ROKFORM WARRANTY We offer a 2-year warranty on our entire catalog, along with 5-star customer support. If you have any issues with your purchase, please let us know, and we will fix it.

1 Ball for Handlebar Phone Mounts this handlebar ball base is with 1 diameter to fit all motorcycle bike phone mounts with 1 sockets.. Aluminium for Never Breaking made from all aluminium, this ball adapter makes phone holders super steadily even on rocky roads. No Tool Quick InstallationDisassembly to lock or loose the ball mount by screw, this ball adapter realizes one-hand easy and quick installingdisassembly.. Wide Fits coming with two rubber gaskets and one non-slip handlebar tape, it universally fits to 0.5-1-1.26 handlebar diameter one 12mm gasket for rear-view mirror pole installation.. 360 Rotation this ball adapter allows motorcycle phone mount to free rotation on handlebars..

Zinc-coated metal U-bolt base with 1 rubber ball is designed to sit at right angles to mounting rail includes black cover caps for exposed ends of the U-bolt. Compatible with any B size RAM Mounts component ball and socket technology allows for near-infinite adjustability. Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments. Backed by a lifetime warranty.

W126108862.

Handlebar mounting base with B size 1 rubber ball accommodates rails 34 to 1 in diameter. Includes sizing inserts to provide a tight fit while protecting the mounting surface mount includes nylon-insert locknuts to prevent loosening. Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments. Backed by a lifetime warranty.

Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone includes optional device tether for peace of mind during rugged use. Includes U-bolt base that accommodates rails from .5 to 1.25 in diameter and a medium length, B size RAM double socket arm ball and socket technology allows for near-infinite adjustability. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments. Compatible with iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, Drive 50, Drive 51 LM, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, RV 660LMT, RV 770 LMT-S, Google Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Huawei Mate 20 X,Motorola moto e4 plus,moto g4,moto z2, moto z2 play, moto z3, Samsung Galaxy A7,Galaxy A7 2017,Galaxy A8, Galaxy A8 2016, Galaxy A9 2016, Galaxy A9 Pro 2016, Galaxy J7, Galaxy Note 10 Plus, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active.

Small version of the RAM Tough-Claw base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625 inch to 1.5 inch in outer diameter rubber pads provide stable gripping and protection of mounting surface. Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone includes optional device tether for peace of mind during rugged use. Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments. Phone Holder Dimensions Width Range 1.75 inch4.5 inch Depth Range 0.875 inch Max. RailTube Clamp Range 0.625 inch1.5 inch Diameter Flat Surface Clamp Range 0 inch1.14 inch. Backed by a lifetime warranty.

Spring-loaded 'X' design with rubber caps sports great holding power without hiding your phone includes optional device tether for peace of mind during rugged use. Includes motorcycle fork stem base that works with stems 12mm to 38mm in length and short length, B size RAM double socket arm ball and socket technology allows for near-infinite adjustability. Made of stainless steel components, high-strength composites, and powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments. Compatible with Apple iPhone 7, iPhone 8, iPhone SE, iPhone X, iPhone Xs, iPhone Xr, Google Pixel 3,Pixel 3a, Samsung Galaxy J7 Series, Galaxy Note 8,Galaxy Note 10, Galaxy S7,Galaxy S7 Edge, Galaxy S8Plus,Galaxy S9,Galaxy S9Plus,Galaxy S10,Galaxy S10,Galaxy S10e,Galaxy Xcover 3, Galaxy Xcover 4.

Spring-loaded 'X' design with rubber caps sports great holding power without hiding your phone includes optional device tether for peace of mind during rugged use. Includes U-bolt base that accommodates rails from .5 to 1.25 in diameter and a short length B size RAM double socket arm ball and socket technology allows for near-infinite adjustability. Device Holder Dimensions Width Range 1.875 - 3.25 Depth Range .875 max Clamp Range .5 - 1.25 diameter. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments. Backed by a lifetime warranty.

Consists of the standard size RAM X-Grip and a 34 RAM Snap-Link socket connected to the small version of the RAM Tough-Claw base not compatible with RAM double socket arms. Small version of the RAM Tough-Claw base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625 to 1.5 in outer diameter rubber pads provide stable gripping and protection of mounting surface. Spring-loaded RAM X-Grip phone holder features rubber caps that sport great holding power without hiding your phone includes optional device tether for peace of mind during rugged use.

Spring-loaded 'X' design with rubber caps sports great holding power without hiding your phone includes optional device tether for peace of mind during rugged use. Compatible with any B size RAM Mounts double socket arm ball and socket technology allows for near-infinite adjustability. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments. Compatible with Apple iPhone 7, iPhone 8, iPhone SE, iPhone X, iPhone Xs, iPhone Xr, Google Pixel 3,Pixel 3a, Samsung Galaxy J7 Series, Galaxy Note 8,Galaxy Note 10, Galaxy S7,Galaxy S7 Edge, Galaxy S8Plus,Galaxy S9,Galaxy S9Plus,Galaxy S10,Galaxy S10,Galaxy S10e,Galaxy Xcover 3, Galaxy Xcover 4.