Power Steering Pulley Installer And Remover Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines. Removes Without Damage Pulley puller tool safely pulls power steering and alternator pulleys without harming pulley grooves, shafts, or surrounding components during removal and installation.. Works Across Vehicle Lines Power steering pulley pullerinstaller compatible with many domestic and import vehicles, this kit supports pulleys on GM, Chrysler, and other brands found in cars, trucks, and SUVs.. Durable Steel Construction Alternator pulley removal tool drop-forged jaws and a solid steel body provide the strength needed for repeated use in shop, garage, or field service settings.. Complete Kit Included Pulley puller kit includes two installer screws to match various pulley types, including applications on belt-driven vacuum pumps and water pump pulleys..

Function Use the alternator pulley tool to replace the pulley on the vehicle to make the accessory drive run quieter and smoother reduce vehicle vibration and extend the life of the belt and belt tensioner. Sturdy Made of chrome vanadium steel CR-V with a black oxide finish and polished coating. Features Allows alternator shaft to be held while the pulley retainer is removal. Wide Application Used on or off the vehicle can be used for overlay alternator decoupler OAD and one way clutch OWC pulleys available for many makes of vehicles. Contents A special set of spline and star socket bits for removing the Pulley drive pulley of Bosch-type alternators. The set includes both standard and short lengths for ease of use.

Power Steering Tool For removal and installation of pressurized alternators power steering pumps and other pulleys. Function This Prokomon tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-18 1-14 1-516 or 1-38 inch hub diameter. Compatibility Fits for late GM for Ford and Chrysler engines Includes special adapters for GM 3.2 Quad 4 engines and Modular engines. Sturdy The pulley puller and installer tools are constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength each piece is also heat treated and blackened for dependability and corrosion resistance. Easy to Use This power steering pulley removal tool is intuitive and In the following product description there are detailed steps for product disassembly and installation.

Universal Fit This spanner wrench set can be used with camshaft pulleys crankshaft pulleys and more variable pins 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 6.5mm and 10mm ensuring it's suitable for different types of vehicles and engines. Adjustable Wrench This pin wrench can be adjusted from 1-14 inches to 5 inches 32 127mm and ensures a tight and secure grip on pulleys. Durable Material This harmonic balancer holder is made of high quality steel material, durable and strengthened by heat treatment process with corrosion resistance. Enhanced Torque This pulley holder tool can connect to a standard 12 drive ratchet or breaker bar which gives you added reach and torque for tackling stubborn pulleys with less effort. Packing List The pin spanner wrench comes with 14 x pins 7 sizes 1 x 12-inch long pin wrench 1 x thin wrench 1 x plastic carrying case.

Everything You Need in One Box This 5 piece long reach harmonic balancer installer kit from Orion Motor Tech comes with 4 long reach adapters and a nutbearing assembly for easy damper installation. For Most Popular Makes Models Our adapters feature M16x2.0, M12x1.75, M14x1.5, M12x1.5 threads, making them compatible with most popular vehicles such as 2004-2012 Ford 3.0L, 3.5L, 4.6L, 5.4L, 6.8L, 2008-2012 GM 4.8L, 5.3L, 5.7L, 6.0L, 7.0L, 2006-2012 DodgeChrysler 3.7L, 4.7L, 5.7L, 6.1L please make sure to measure the balancer port before purchasing. Damper Installation Made Easy Make damper installation a breeze with our harmonic damper installer kit simply thread the nutbearing assembly onto the adapter, insert it into the crankshaft, and rotate until the damper is fully seated. Meticulously Crafted for Seamless Operation Our harmonic balancer installation tools are precisely forged and molded to ensure smooth and damage-free operation. Engineered for Lasting Service These crank pulley installers are blackened and constructed from solid steel for superior strength, corrosion resistance, and durability to withstand heavy daily use.

Easy Damper Pulley Removal Remove damper pulleys in tight engine compartments without removing the radiator, saving you time and effort.. Damage Reduction Designed to ease the operation of pulling the balancer pulley, reducing damage to both the pulley and the shaft.. Wide Compatibility Compatible with Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile vehicles, including cars, SUVs, vans, and pickup trucks.. Durable Construction Manufactured with high-quality 45 steel for extra strength and longevity, with a corrosion-resistant black oxide finish.. Complete Set Includes a 3-jaw puller, 4 forcing rods, 2 forcing screws, and a storage case for convenient organization and transportation..

WIDE APPLICATIONS This harmonic balancer puller is compatible for GM 5.7L V8 GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8 Cadillac 4.5L, 4.6L, and 4.9L V8 Compatible with Chevrolet Trucks 2003- 4.2L I6, 2004- 3.5L I5, 2005- 2.8L I4 Compatible with Ford 1995- V8 engines Mitsubishi Eclipse 1995- 2.0L DOHC non-turbo. UPGRADED VERSIONOur harmonic balancer pullerinstaller set has 6 jaws, 3 thicker jaws to fit older vehicle models and 3 thinner jaws to fit the newest models Fits most new and old models. QUICK BALANCER REMOVAL This harmonic balancer puller kit is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time. PREMIUM QUALITY MATERIAL Manufacture by high hardness steel provides extra strength and longevity with a black oxide finish for corrosion resistance. PACKAGE INCLUDES 1 x 3-jaw puller, another 3-jaw can be replaced, 4 x forcing rods, 1 x harmonic balancer holder, 1 x gloves, 1 x storage case Dimension 38 drive forcing screw-90 mm 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm.

Efficient water pump pulley removal and installation works on 3.0L V6 DOHC engines. Allow a precise and hassle-free operation without damage to components.. Compatible for Ford Escape Duratec 3.0L V6 2001-2012 Compatible for Ford Fusion Duratec 3.0L V6 2006-2012 Compatible for Lincoln MKZ 3.0L V6 2007-2012 Compatible for Mercury Mariner 3.0L V6 2007-2012For Mercury Milan 3.0L V6 2007-2012For Mercury Sable 3.0L V6 2000-2005For Mercury Cougar 3.0L V6 1999-2002.. Cross numbers 8069, 7483A, 303-S455, 303-009, 303-456, 303-457, 303-459.. The water pump pulley remover installer tool set is made of heavy duty steel and is resistant to bending and failure. And the tool surface has a black oxide coating to prevent corrosion and rust. Long service life, quality tool.. Includes 1 x Forcing Screw Puller Top Plate, 2 x Hex Head Cap Screws with Washers, 1 x Water Pump Pulley Installer, 1 x Shaft Protector, 1 x Swivel Head..

ADJUSTABLE DESIGNThis adjustable crankshaft pulley removal tool is equipped with adjustable arms, capable of accommodating various sizes of crankshaft pulleys and flywheels, with an adjustable range of 6.5-1.57 for versatile use.. Anti-Slip ThreadUtilizing a three-jaw thread for a tighter grip, this tool offers a tighter and more secure grip on the crankshaft pulley. The anti-slip thread, combined with a smoothly rotating screw design, guarantees a firm grasp and smooth operation during the disassembly process, enhancing safety and efficiency. Easy To UseSuitable for a variety of transmission pulley sizes and types, making it a versatile addition to any technician's or mechanic's toolkit.. High-Torque CapabilityEquipped with robust mechanics to generate high torque, making it ideal for stubborn or tightly fitted pulleys.. Durable ConstructionCrafted from durable materials to withstand the rigors of repeated use and the demands of automotive or industrial environments..

Kit features four yoke slots allowing unit to be used for two or three-hole applications. 30 Different size bolts included. The floating swivel prevents damage to the shaft ends. Yoke is heat-treated alloy steel for strength and durability. Set includes yoke, pressure screw, and pulling screws in a molded storage case.

AUTO_ACCESSORY. A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. Fits pulley hubs with diameters of 1-18, 1-14, 1-516 and 1-38. Includes the necessary adapters for servicing GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines. Housed in a blow-molded storage case to protect and organize components..

Function Easily remove and install crankshaft and camshaft seals without damageCompact puller with unique extracting hooks engage seal for quick removalInterchangeable sleeves and mandrels allow easy installation of new seal.. Include The Crank Bearing Camshaft Seal Installer and Remover Set,including 1 x Puller,12 x Seal Hooks,7 x Bolt Adapter 8,10,12,14,16,18,20mm,4 x Gasket 10,18,22,27mm,7 x Sealing Adapter28,34,42,46,49,56,64mm,1 x Installer Plate,1 x Seal Puller,1 x Gloves,1 x Stroge Case,1 x Automotive Tools Manual.. High Quality The camshaft oil seal puller tool is made of high-quality carbon steel, offering exceptional hardness and durability, and is resistant to deformation and breakage. It also comes equipped with an aluminum sealing adapter to protect the crankshaft from damage, making it both convenient and practical.. Seal Puller Features a double hook tip design, This seal removal tool is available in two hook sizes, it is suitable for most oil and grease seals and easily handles a wide range of repair situations, making the seal removal process quick and easy. Wide ApplicationThis crank bearing camshaft seal removal tool is suitable for a wide range of cars with oil seals between 27mm and 58mm 1.06-2.28 in diameter..

Broad Applicability The Power Steering Pump Pulley Tool Kit is suitable for disassembling and installing power steering pump pulleys on most domestic vehicles, including GM, Ford, Chrysler, and Volkswagen vehicles such as GM 3.1L V6 engine, 2.3L Quad 4 engine, and Ford 4.6L, 5.4L, 5.8L V8 engines. It supports operations on GM V6 engine's pressed-in water pump pulleys and GM belt-driven vacuum pump pulleys, and is compatible with Saginaw, Thompson, Ford C111, and C2 power steering pumps, ensuring easy handling of various power steering pulley disassembly and installation needs.. Full Tool Set The Power Steering Pump Pulley Tool Kit includes 1 pump pulley installation tool 38-16 UNF, 1 pump pulley removal tool 58-18 UNF, 1 power steering disconnect tool, 2 fastening screws 38-16 UNF and 58-18 UNF, 1 socket, and 2 puller jaw claws, suitable for pulley hubs with diameters of 1-18 inches, 1-14 inches, 1-516 inches, and 1-38 inches.. Ease of Use Before using the power steering pump pulley installation tool, lubricate the tool first. Place the threaded screw in the center of the pulley, engage the crescent-shaped clamping shell and lip retainer, then place the gripping nut center piece on top, tighten the threaded bolt to the center of the puller nut end, and easily loosen and remove the pulley with a ratchet, crescent wrench, or pneumatic gun for efficient and straightforward operation.. Durability The pulley puller tool kit is made of carbon steel, designed to handle any small pulley work, ensuring durable strength and longevity of the tool. Whether dealing with small or large pulley operations, it maintains excellent performance over prolonged use.. Convenient Storage Portability The power steering pump pulley tool kit comes with a sturdy storage case that neatly organizes all components, keeping the installation tool, removal tool, puller claws, sockets, and screws securely in place. This design makes it easy to carry, store, and access all the necessary tools on the go, ensuring you can handle power steering pulley tasks efficiently anytime, anywhere..

12PCS PULLEY PULLER AND INSTALLER SET - Designed to remove and install pulleys smoothly and effortlessly. Apply to variety of pins and adapters to fit most domestic and imported vehicles.. COMPATIBILITY - Comes complete with adapters for the GM 3.1L and Quad 4 motor's unique style pulleys, as well as compatible with Ford's 4.6L metric requirements. QUALITY AND DURABILITY - High quality carbon steel construction and excellent manufacturing process for a long service life, exquisite mold and screws for your comfort.. CONVENIENT STORAGE EASY TO CARRY - Equipped with a portable plastic carrying case for convenient storage and transportation, and quick organization collection and portability after use.. ESSENTIALS FOR MECHANIC - This power steering pulley remover and installer set with a reversible split jaws. It is a must have kit for professional and home DIY mechanics..

Package Includes 2-bearing puller, 1 piece of each size, 3 inch, 4 inch, 6 inch and 8 inch, 4 pieces in total,. High Quality This 2 jaw bear puller is made of high-strength and heat-treated high carbon steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.. Easy to Use Use the 2 jaw to catch the bearing Rotate the mandrel with the thread Slowly pull out the bearing of the shaft.. Adjustable Size The pulley puller tool can be rotated in both directions to expand the working space. Adjustable clamping depth between two jaw, suitable for different sizes of gears and bearings. Widely Usethe jaw bearing puller kit gear pullers Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on..

Widely ApplicationLainKeen Belt Tensioner Pulley Tool Kit includes multiple sizes of adapters that are compatible with virtually all vehicle models for removing and installing serpentine belts on vehicles with spring-loaded belt tensioner. Ease of useSerpentine Belt Tensioner Tool works in tight engine compartment spaces, with easy access to hidden nuts and bolts on the tensioner, timing wheel or auxiliary pulley. High Quality MaterialIdler Pulley belt tensioner tool set is made of high temperature treated high quality steel to ensure durability, rust and corrosion resistance, and is not easy to break and deform. Ergonomic HandleThe Timing Serpentine Belt Tool is designed with a long handle for a comfortable, non-slip grip and less effort than ordinary tools for hard-to-reach idlers. Product SpecificationsAuxiliary Idler Belt Tensioner Pulley Removal Tool Includes 1 long bend wrench, 5 torx adapters E10, E12, E14, E16, E18, and 8 12-point adapters 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm come with a heavy-duty toolbox for easy storage, transportation, and portability.

7-Piece Power Steering Pump Pulley Puller Tool Set 1pc Pump Pulley Installer Tool 1pc Pump Pulley Remover Tool 1pc Collar Retaining Ring 1pc 38 x 16 516 18 Bolt 1pc 38 x 16 Bolt 1pc Power Steering Disconnect Tool 1pc Puller Jaws. Heavy-Duty Construction Power steering pump pulley puller made from high-quality carbon steel and treated with black manganese phosphate coating, offers exceptional durability and resistance to wear, ensuring it withstands the demands of regular use in automotive repairs. Versatile Compatibility Pump pulley remover installer repair tool is suitable for power steering pump pulleys with hub diameters of 1-18, 1-14, 1-516, or 1-38, making it a versatile addition to any mechanic's toolkit for most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM's V6 engines, most VW vehicles' power steering systems. Precision Engineered Power steering pump pulley puller removal and installer tool is specifically designed for the efficient removal and installation of power steering pump pulleys, ensuring precision and ease of use for every task, easily removable pulleys, reduces the risk of damage during removal. Enhanced Performance Lubricating the threads before use prevents the tool from breaking for optimal performance, allowing for smooth operation and extended lifespan of the tool set during power steering repairs. Easy to Carry Pump pulley remover installer repair tool comes in a sturdy, high-impact storage case, with latches keeping your items organized and easily accessible, convenient storage and use.

Combo 23 jaw gear pull 4. Tool solutions for most all situations. Built to exceed tool standards. Strong and dependable enough to last a lifetime. Kit services many Domestic V8 and V6 engines with harmonic balancers with threaded holes. Tool set for removal and installation of harmonic balancers that have threaded holes. For use on many US made V6 and V8 engines. Includes special puller for removal of the crankshaft pulley on many 1990 and newer Chryslers engines. Storage case includes usage photos. Kit 45 includes 33-Piece for removal and installation of harmonic balancers with threaded holes.

Comprehensive Kit This harmonic balancer puller set makes removing and installing most press-fitted harmonic balancers and drive pulleys easy. It includes all necessary bolts and adapters for most applications, making it a comprehensive tool set for a wide range of jobs. Product Specifications This harmonic balancer puller kit includes bolts with threads 38-24 UNF, 38-16 UNC, 516-18 UNC, 516-24 UNF, 14-28 UNF, M10x1.5, M10x1.0, M8x1.25, and M6x1.0 for versatile compatibility. Wide Application This harmonic balancer puller set includes metric and standard bolts for flywheel, crankshaft pulley, and steering wheel removal. Note Not compatible with all vehicles, lacks M12x1.75 bolt, and not for LT1 Gen 2 or 4.0L Chrysler engines. Durable and Long-Lasting The harmonic balancer puller is made of high-quality, heavy-duty steel with exceptional strength and hardness. The surface is coated with an anti-oxidation coating to prevent rust, ensuring a long service life. Easy Removal and Installation This harmonic balancer kit removesinstalls balancers quickly and easily without damaging engine parts. Its thrust bearing design ensures smooth, even operation with minimal effort.

Applicable Vehicles Compatible with Ford Escape Fusion Lincoln MKZ Mercury Mariner Milan 3.0L Duratec Engine. Compatible with Ford Esacpe 2004-2014, Compatible with Ford Escape Hybrid 2005-2012, Compatible with Ford Fusion 2006-2012, Compatible with Ford Fusion Hybrid 2010-2012 Compatible with Lincoln MKZ 2008-2012, Compatible with Lincoln MKZ Hybrid 2011-2012 Compatible with Mercury Mariner 2006-2011, Compatible with Mercury Mariner Hybrid 2016-2011, Compatible with Mercury Milan 2006-2011, Compatible with Mercury Milan Hybrid 2010-2011, Compatible with Mercury Sable 2010-2011 2001-2005. Function This water pump pulley remover installer tool kit is used to remove and install water pump camshaft pulley on 3.0L DOHC engines. Ideal for pulling and reinstalling your 3.0 water pump pulley, easily and efficiently. OEM Equivalent Part Number 8069, 7483A, 303-S455, 303-009, 303-456, 303-457, 303-459, T94P-6312-AH1, T94P-6312-AH2, T58P-6316-D, 211-185 ZTSE4717. Professional Grade Tools This tool is made of high-quality steel, extremely durable, and not easily damaged And after professional design and rigorous testing, it can perfectly match the corresponding 3.0l Duratec engine model. A Complete Set The water pump pulley puller removal and installation tool kit includes T-puller, 303-456 T94P-6312-AH1 water pump pulley removal plate, 303-457 T94P-6312-AH2 water pump shaft protector, 211-185 ZTSE4717 power steering pump pulley installer, 2 hex head cap screws with washers, a portable case and instruction manual.

Function -- Replace for OTC pn 522 7393 8056 puller and protector tools.522 large gear and pulley puller can easily remove a wide range of gears, pulleys or other parts that have tapped holes.7393 gear and pulley puller help you easily remove timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes. 8056 shaft protector set is used with grip-o-matic puller or push-puller, fan blade, gear and bearing Pullers.. 522 Large Gear and Pulley Puller -- Compatible with Ford D80L-522-A and 303-D025, Spread from 2 inches to 7-34 inches block is 8-14 inches wide. Forcing screw is 34 inch-16 x 11-58 inches long. This tool could accommodate any cap screw up to 12 inch diameter and fit for many types of gears and pulleys.. 7393 Gear and Pulley Puller -- Puller features a spread of 1-12 inches to 4-14 inches. Puller block is 4-78 inches wide. 5-12 inch long center screw includes 2 ea. 38-16 x 3 inch long hex head cap screws.. 8056 Shaft Protector Set -- Designed to protect shaft centers from distortion when extreme pressures are applied with either Grip-O-Matic pullers or Push Pullers. The male and female locators will help keep the shaft protector in place during use.. High Quality -- Made from premium grade steel with black oxide finished at surface, the tools are hardened and extremely durable and strong, corrosion and rust resistance, very universal that you can use it however you need to. Best quality with best price, purchase this must-have tools kit now.

Durable Material Heat-treated carbon steel ensures maximum strength Chrome and black oxide finishes resist rust and corrosion Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization. 4-Way Slotted Gear Puller Set The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm 11mm hole size, 93mm Max span.. Easy Operation Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.. Application The balancer puller can be used on a variety of jobs harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application. Package Included 1pc yoke, different size of bolts, 3pcs 38162, 3pcs 38163, 2pcs 38164-12, 3pcs 38241-12, 2pcs 14 282-12, 2pcs 516 186, 3pcs 516 243-12, 2pcs 516 243, 3pcs M81.2545MM, 2pcs M81.2565MM, 2pcs M81.590MM, 3pcs M101.2535MM different size of washer 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID..

2-in-1 Removal Installation Tool The harmonic balancer puller kit's adjustable puller plate fits 2.24.3 in56108 mm centers. Quickly disassembles or installs harmonic balancers without damaging engine components. Multi-Thread Compatibility Our harmonic balancer puller set includes multiple screws and thread adapters. It is compatible with a range of metric and standard boltscheck vehicle fitment before use. Selective Fitment Notice Not for all vehicles. The harmonic balancer puller does not include M12 x 1.75 bolts. It is not compatible with LT1 Gen 2 engines. Built to Last The harmonic balancer pulley puller set is crafted from premium steel for outstanding durability. It withstands tough jobs and long-term use without breakingsolving the common problem of tool failure in high-pressure repairs. Versatile Applications This harmonic balancer remover handles worn or damaged harmonic balancer removal. It is also great for flywheels, crankshaft pulleys, and steering wheelsone tool, many uses.

Gear Pulling Made Easy Conquer your gear pulling tasks with Orion Motor Tech's 24-piece gear puller set, including four puller sizes with maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to ensure you're always prepared for a variety of applications.. 2-Jaw 3-Jaw Pullers This pulley puller kit comes with straight and triangular jaw brackets for 2-jaw and 3-jaw puller assemblies. Simply grab your wrench or ratchet, and tackle gear, bearing, pulley, and flywheel pulling tasks hassle-free.. Reversible Jaw Design The innovative reversible jaw design of this pulley removal tool enables you to extract parts effortlessly from both inside or outside, making your repair tasks more accessible and efficient.. 4-Position Pullers Each reversible jaw of the 4, 6, and 8 pullers boasts dual fixing holes, offering four configurations for short, standard, long, and extra-long reaches, perfect for navigating in tight spaces or accessing components deeply embedded.. Built for Durability Crafted from heat-treated steel with chrome-plated or blackened finish, each jaw puller tool is designed for superior durability and corrosion resistance. The custom blow-molded case makes organization and transport a breeze..

STEERING WHEEL REMOVAL TOOL Our steering wheel remover tool set is designed to pull steering wheels on all major makes and automobiles Steering wheel puller tool set also includes a steering lock plate remover. VARIETY OF USES These steering wheel pullers are compatible with most American domestic and imported cars and light trucks Truck and car steering wheel puller kit is useful for any mechanic tool set or automotive tool kit. EASY TO USE This puller kit for automotive steering wheels comes with clear instructions that are easy to understand Excellent steering wheel accessories for any steering wheel repair kit or for assisting with steering wheel replacement. EASY STORAGE Our steering wheel removal kit comes in a sturdy plastic storage case that keeps the steering wheel puller tools organized and secure Convenient storage case makes it simple to carry this steering wheel kit anywhere. PRODUCT SPECIFICATIONS H Bar, Frame, 2 Leg Rods, 2 516 x 18 Bolts, 2 38 x 16 Bolts, 2 14 x 28 Bolts, 2 8mm x 1.25 Bolts, 2 516 x 24 Bolts, Frame Nut and Washer, Pressure Screw and Point, M14 x 1.5 Adapter, and 916 x 18 Adapter.

UNIVERSAL REMOVAL TOOLS This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts. BETTER TOGETHER Our bearing puller set includes three puller sizes, offering maximum spreads of 3, 4, and 6 and reaches of 4.3, 5, and 7.3 to cover most applications. 3 JAW DESIGN These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage. REVERSIBLE JAWS Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes. TOOLS FOR MECHANICS Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Idea for Installs drive pulleys or harmonic balancers that are press-fitted onto the crankshaft, available on almost every car and light truck application. 13 special adapters in the right reach lengths to fit most threaded crankshafts. The heavy-duty 78 diameter forcing screw has internal threads to fit the threaded adapters. Threaded adapter size each of 716-20, 12-20, 916-18, 58-18, 34-16, M10 x 1.5, M12 x 1.0, M12 x 1.5, M12 x 1.75, M14 x 1.5, M14 x 2.0, M16 x 1.5, M16 x 2.0. Come in with blow case.

Broad Vehicle Compatibility The Power Steering Pump Pulley Removal Tool is compatible with Ford, GM, and VW models, this tool kit works seamlessly with Saginaw, Thompson, and Ford C111 and C2 power steering pumps, GM V6 engine's belt-driven vacuum pumps, and press-on water pump pulleys.. Comprehensive Tool Set Includes a pump pulley remover, installer, disconnect tool, two puller jaws, and forcing screws in various sizes 38-16 UNF and 58-18 UNF, suitable for pulley hubs with diameters ranging from 1-18 to 1-38. Comes with a custom carrying case for organized storage and portability.. Heavy-Duty Durability Made from structural-grade AISI 1045 medium carbon steel with heat treatment and corrosion-resistant blackened finish, ensuring long-lasting strength and reliable performance under tough conditions.. Easy to Use Features a straightforward installation and removal process. 1. Place the threaded screw in the center of the pulley, engage the crescent-shaped clamping shell and lip retainer 2. Place the gripping nut center piece on top, tighten the threaded bolt to the center of the puller nut end, and and use a wrench or pneumatic gun to effortlessly remove or install power steering pump pulleys with minimal effort.. Package Included Includes a pump pulley remover, installer, disconnect tool, two puller jaws, and forcing screws in various sizes 38-16 UNF and 58-18 UNF..

Reliable Function The harmonic damper puller kit is designed to remove the damper pulleys in the compact engine compartment without removing the radiator. The harmonic balancer puller set can simplify the operation of pulling the balancer pulley and reduce damage to the pulley and shaft.. Built to Last The 3-Jaw pulley puller tool is made of high quality AISI 5140 alloy steel with extra strength and longevity. This steel construction with black oxide coating is characterized by corrosion resistance and rust prevention during use.. Adjustable 3-Jaw Design The 3-jaw puller system adopts the 3-jaw enhanced design for a firm and secure grip and optimal position retention. The U-shaped clamp pin in 3-jaw puller set allows for quick removal and installation of the jaws.. Wide Compatibility This harmonic balancer installer set is suitable for GM, Mitsubishi, Cadillac, etc. And the 3-jaw pulley puller set is also compatible with cars, SUVs, vans, and pickup trucks.. Package Included This harmonic balancer puller removal tool includes 1 x 3-jaw puller, 4 x forcing rods4.3, 5.5, 6.5, 7.5, 1 x forcing screw, 1 x storage case..

POWER STEERING REPAIR SET This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-18, 1-14, 1-516, or 1-38 inch hub diameter. COMPLETE 7-PIECE SET This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool the reversible puller jaw design also lets you check and repair pulley flanges with greater ease. DURABLE PERFORMANCE Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use. WIDE COMPATIBILITY This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM's V6 engines the two forcing screws also work with most VW vehicles' power steering systems. USER FRIENDLY This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.

DEPENDABLE SPECIALTY TOOLS Removes and installs power steering pump pulleys for easy servicing includes 2 installer screws, 2 pulley removers, a pulley bushing, and a GM quick disconnect tool. IMPORT AND DOMESTIC VEHICLES Kit services a variety of vehicle hubs with 1 18 inch, 1 14 inch, 1 516 inch, and 1 38 inch diameters. BUILT STRONG Powerbuilt tool kits meet or exceed ANSI standards for long tool life Lifetime warranty. COMES IN Heavy duty blow molded case to keep set protected and organized. EASY TO READ Includes usage instruction with photos.

UNIVERSAL REMOVAL TOOLS This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts. BETTER TOGETHER Our bearing puller set includes four puller sizes, offering maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to cover most applications. 3 JAW DESIGN These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage. REVERSIBLE JAWS Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 and 8 gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes. TOOLS FOR MECHANICS Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

This power steering pump pulley removal tool set is crafted from structural-grade AISI 1045 medium carbon steel, ensuring the strength needed for tough jobs. Each tool is heat-treated and blackened for enhanced durability and superior corrosion resistance, promising years of reliable use. The robust screws are exceptionally durable, making this set perfect for garage or service station environments.. 7-Piece Pulley Puller Set This comprehensive power steering pump pulley pullerinstaller tool set includes 1 x pump pulley remover, 1 x pump pulley installer, 1 x sleeve, 2 x forcing screws, 1 x power steering disconnect tool, and 2 x puller jaws. The reversible puller jaw design also allows for convenient checking and repairing of pulley flanges.. Power Steering Pulley PullerInstaller This pump pulley puller remover and installer set is specifically designed for the removal and installation of power steering pump pulleys on domestic vehicles. It can pull and install any pump pulley with hub diameters of 1-18, 1-14, 1-516, or 1-38 inches. Suitable for both GM and Ford vehicles, ideal for home or professional use.. Specification Screw size 58 -18UNF, 58 -18UNF, 38 -16 UNC, 38 -16UNC x M6 - 1.25mm. This power steering pump pulley installer and remover set comes with a storage case keeps everything well organized and easy to store and carry.. Wide Compatibility This power steering pulley pullerinstaller is compatible with most Ford, Chrysler, GM, and VW vehicles' power steering pulleys. It fits Saginaw, Thompson, and Ford C111 and C2 pumps, as well as belt-driven vacuum pumps and press-on water pump pulleys of GM V6 engines. The two included forcing screws work with most VW vehicles' power steering systems, making this kit an essential tool for a wide range of automotive applications..

Universal CompatibilityOur Power Steering Pump Pulley Removal Tool Set is designed with universal compatibility in mind. For removal and installation of power steering pump and alternator pulleys. Whether you're working on a sedan, SUV, or truck, this versatile pulley puller tool set is engineered to fit a wide range of vehicle makes and models. Say goodbye to compatibility concerns and embrace the efficiency of a tool set that covers all your car repair needs.. Effortless Pulley Removal and InstallationTackle power steering pump and alternator pulley replacements with ease using our purpose-built pulley puller tool set. The precision-engineered components ensure a seamless removal and installation process, saving you valuable time and effort. Experience the convenience of a tool set that streamlines the often challenging task of pulley maintenance.. Enhanced Versatility for Comprehensive RepairsBeyond power steering pump pulleys, our power steering pulley puller tool set is designed to handle a variety of pulley-related tasks. From alternator pulleys to other engine components, this pulley puller and installer kit provides enhanced versatility for comprehensive car repairs.. Durable Construction for LongevityCrafted from high carbon steel, our power steering pulley removal tool ensure durability and longevity. The robust construction ensures that this pulley removal tool withstand the rigors of regular use, making them a reliable companion for multiple car repair projects.. Well-packedPower steering pulley pullerinstaller for use on most power steering pump pulleys,configurable to suit almost any alternator or power steering Pulley application, no additional adapters required. Includes Heavy Duty blow molded carrying case for easy transportation, safe storage and quick organization..

COMPLETE TOOL SET This pulley puller tool kit includes a 4-slot puller yoke, a pressure screw, 3 adapters, and 30 bolts in basic SAE and metric sizes 14-28, 516-18, 38-24, 38-19, 38-16, M8x1.25 and M10x1.5. MULTI-FUNCTIONAL USE The 4-slot yoke puller set efficiently removes harmonic balancers, steering wheels, crankshaft pulleys, gears and flywheels. With 30 different bolts and the steel yoke frame included, it is suitable for daily auto repair work on most cars, trucks, SUVs, and small engine vehicles. STURDY MATERIAL Made of strong carbon steel material, the heat-treated center adapter and hardened forcing screw helping this steering wheel tool kit can withstand repeated use, with high reliability and excellent corrosion resistance, is suitable for long-term use. EASY TO USE The 46-piece crank puller set includes 30 different bolts and a robust steel yoke frame. Simply locate the threaded hole, attach the puller with the proper bolts, and gradually tighten the center screw to elevate the puller body. Making steering wheel removal work easy and efficient. UNIVERSAL AUTOMOTIVE REPAIR TOOL The 46 pieces harmonic balancer puller kit is a comprehensive kit designed to easily remove harmonic balancers, steering wheels, crankshaft pulleys and more. This kit fits most cars, pickups, and SUVs, the flexibility of the 4-slot yoke makes it a universal choice for various automotive applications.

User-Friendly The kit facilitates effortless removal and installation of harmonic balancers, making it a must-have for maintenance. Its thrust bearing design ensures smooth operation without harming engine components.. Versatile Fit With an assortment of metric and standard bolts, the kit caters to a broad range of vehicles. Its a comprehensive solution for removing worn or damaged harmonic balancers. Comprehensive Kit Includes bolts of various sizes, such as M16 x 2.0, M14 x 1.5, and more, along with black and silver screws to match diverse specifications. Always verify compatibility with your vehicle. Selective Compatibility Not suitable for all models lacks an M12 x 1.75 bolt and is not compatible with LT1 Gen 2 engines or certain 4.0L Chrysler engines e.g., early 2000s Pacifica, 2008-2010 Chrysler TC Limited, Dodge Grand Caravan. Durability Constructed from high-quality, heavy-duty steel for exceptional strength and durability. The anti-oxidation coating on the surface prevents rust, ensuring longevity.

Widely ApplicationThe kit is used for removing installing pressed on alternator, power steering pump and other pulleys on engines fit for Ford, Chrysler and Late GM power steering pulleys with Saginaw, Thompson. Note Doesn't fit for 3.3L and 3.5L Chrysler engines. Easy To UseThis home and professional power steering repair pulls and installs any pump pulley with a 1-18, 1-14, 1-58, or 1-38 inch hub diameter. With this power steering pump pulley puller tool set lets you check and repair pulley flanges effortlessly. High Quality Our power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right Each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to ensure long term use. Protective Carrying CaseThe carrying case is crafted from high-quality ABS, it can conveniently keeps all the removal tools well organized, easy to storage and carry. Great ServiceAll 14 tools are in 1 well-organized ABS case. It is very important to lubricate screw threads when using, avoid breaking. If you have any questions,feel free to contact us, we will reply you and give you solutions within 24 hours.

Comprehensive Kit for Various Engines Includes four threaded rods M16 x 2.0, M14 x 1.5, M12 x 1.75, M12 x 1.5, compatible with Ford, GM, Dodge, and Chrysler V8V6 engines, ensuring wide application and convenience for diverse automotive tasks.. Durable and Reliable Construction Crafted from high-strength alloy steel, this harmonic balancerpulley installer ensures durability and reliability, reducing the risk of breaking crank bolts and stripping crank threads during installation.. Smooth and Efficient Operation Features a heavy-duty driving nut with thrust bearing for smooth operation. This tool simplifies the installation of crank and underdrive pulleys, enhancing efficiency and precision.. Long-Reach Design for Tight Spaces The long-reach design allows access to hard-to-reach balancer pulleys, making it ideal for complex automotive repairs. This feature enhances usability and effectiveness in confined engine compartments.. Corrosion-Resistant Finish and Organized Storage Black phosphate finish provides superior corrosion resistance. The set comes with a sturdy, organized storage case, keeping all components secure and easily accessible..

Efficient water pump pulley removal and installation works on 3.0L DOHC engines. Allow a precise and hassle-free operation without damage to components. Cross numbers 8069, 7483A, 303-S455, 303-009, 303-456, 303-457, 303-459. For Ford Escape Duratec 3.0L 2001-2012. For Ford Fusion Duratec 3.0L 2006-2012. For Lincoln MKZ 2007-2012.

Designed for removing harmonic balancers in tight engine compartments without having to remove the radiator. Kit contains 3-jaw puller, four lengths of forcing rods, forcing screw with a 38 inch internal square drive for ratchet use and 34 inch external hex for wrench or socket use plus an extra set of jaws to cover even more applications and vehicles. Rugged, high quality materials ensure high strength and a long service life. Compatible with GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L, and 8.1L V8s CADILLAC 1988 4.5L, 4.6L, and 4.9L V8s CHEVROLETGMC 2003 4.2L I6, 2004 3.5L I5 2005 2.8L I4 CHRYSLER 1990 2.0L, 2.4L I4s plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s. Compatible with FORD 1995 V8 engines with 3 spoke pressed on damper MITSUBISHI 1995-99 Eclipse 2.0L DOHC non-turbo SAAB 2005-09 9-7X with 4.2L, 5.3L, or 6.0L engine VOLKSWAGEN 2009-10 Routan 4.0L.

DIY OR PRO HARMONIC BALANCER REMOVER Removing harmonic balancers with a prybar damages components Our pully puller tool easily and safely removes harmonic balancers, vibration dampers, pulleys, and more Includes bolts for GM 3300 and 3800 V6 engines. EASY-TO-USE PULLEY PULLER Features a yoke with 4 slots, which allows for 2 or 3 hole applications The floating swivel prevents damage to shaft ends Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw. VERSATILE HARMONIC BALANCE TOOL Not just a harmonic balancer pulley puller This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit Invest in versatility. RELIABLE HARMONIC PULLER The screw tip keeps the harmonic pulley puller in place while you apply torque The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle. DURABLE PULLER TOOL The steering wheel remover's yoke is heat-treated for strength and durability Lubricate the pressure screw before using the steering wheel pullers to make the operation easier Not meant to be used with impact drills.

Installs alternator and power steering pulleys including Quad 4. Blow molded case keeps the tools organized and easy to transport. Case dimensions 9 long x 7 14 wide x 2 high. Case Dimensions L9 xW7-14 xH2. Weight 2 lbs..

Leading manufacturer of high-quality tools. Made to withstand even the most demanding jobs. International Renown for our diverse range of products. All our products have been designed with the requirements of the professional in mind. Trusted, designed, and used by experts.

Designed For The Removal of Alternator, Power Steering Pulleys and More. Reduces The Possibility of Damage To Delicate or Expensive Parts. Configurable To Suit Almost Any Alternator or Power Steering Pulley Application, No Additional Adapters Required. Includes Heavy Duty Blow Molded Case. Kit includes usage instruction with photos. Tool set for removal and installation of power steering pump and alternator pulleys. For use on most power steering pump pulleys. Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. Storage case includes usage photos. Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys.

Design for Versatility This power steering pulley puller installer fits 1-18, 1-14, 1-38, 1-58 shafts including Quad 4 without extra adapters, boosting versatility. Its design also reduces damage risk to fine parts, protecting your power steering pulley and more. Comprehensive Functions for Efficiency The pulley puller tool includes adapters, reverse jaws for alternator bearings, and 2 specialized tools. These simplify handling unique and common pulleys, making the power steering pump pulley removal tool efficient. Premium Material Crafted from high-strength carbon steel, this pulley puller tool boasts fine craftsmanship for long-lasting performance. Its robust build makes the power steering pulley puller reliable for frequent automotive repair tasks, withstanding regular wear. Wide Use in Various Scenarios Ideal for removing and installing power steering pulleys, alternator pulleys, this pulley removal tool works on most domestic cars and trucks. Its a practical choice for diverse repairs involving power steering and alternator systems. Easy Operation for All Users Using this power steering pulley puller is straightforward no complex steps. With included adapters and user-friendly parts, even beginners can efficiently do removal and installation tasks.

New.

Designed to remove and install press-on-type belt-driven accessory pulleys found on most major domestic vehicle platforms. Includes components necessary to use on pumps with the common 38-16 threaded shaft. Applications include GM Quad 4, GM 3.1L, and Ford 4.6L engines. Made in the USA.

For a wide range of pulling jobs including bearings alternator, generator, power steering, and crankshaft pulleys timing gears harmonic balancers and more. Drop-forged components can be used in a variety of combinations. Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-14 inches. Kit includes 2 ea. forcing screws live center, 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts. Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed.

Wide range of professional automotive specialy tools. Professional grade. Heavy duty design.

For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.. AUTO_ACCESSORY. For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft..

The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys. Works on traditional V-shaped pulleys and serpentine belt system pulleys. Also works faster than other conventional pulley pullers. Fits most domestic models including GM 3.1 and Quad 4 engines.

Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help. Pullers can also be converted to two- and three-leg pullers.

POWER STEERING PULLEY INSTALLER AND REMOVER Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines. WORKS WITH MANY VEHICLES This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps Pulls pulleys on GM belt-driven vacuum pumps. HEAVY-DUTY POWER PULLER The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability Power steering pump pulley installer designed to tackle any small pulley job. CONVENIENT STORAGE Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability Take this power steering pump pullerinstaller from job to job while keeping your puller kit organized. PRODUCT SPECIFICATIONS Pulls any pulley with hub diameters measuring 1-18, 1-14, 1-516, or 1-38 inches Pulls pulleys on GM belt driven vacuum pumps Pulls pressed-on water pump pulleys of GM V6 engines.

WHEEL BEARING PULLER SET This wheel bearing tool kit by Orion Motor Tech provides everything you need to let you quickly and easily remove and install your wheel bearings without hammering and front-end alignment, Please lubricate the rod to protect the threads. UNIVERSAL COMPATIBILITY Our versatile wheel bearing press kit offers multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, whether foreign or domestic. QUICK EASY OPERATION Two 8.8 grade sliding screws with precision threading firmly hold your bearings and let you smoothly pop them out without damage, leaving the steering knuckle and strut assembly untouched. DURABLE CONSTRUCTION Made of premium stainless steel, this wheel bearing removal tool set provides strong and dependable long-lasting service the sliding screws are heat treated and blackened for superior strength and corrosion resistance. COMPACT PORTABLE This 24 piece front wheel bearing press tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.

ITEM SPECIFICATIONS Our Power Steering Pump Pulley Remover and Installer Tool Kit is a disconnect toolset that releases the power steering pulleys from the pump and installs new ones on most American domestic vehicles. The kit fits pulley hubs with diameters of 1 18 inches, 1 14 inches, 1 516 inches, and 1 38 inches. This kit is a must-have for the new plastic pulleys found on newer vehicles. PROPER USE Use lubrication on the tools prior to use. Place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top. Tightly screw the threaded stud onto the center of the end of your puller nut, and then use your tool of choice to loosen and remove. When you're finished, store the tools safely in the included high quality storage case.. APPLICATIONS This Power Steering Pump Pulley Remover and Installer Set is compatible with Saginaw, compatible with Thompson, and compatible with Ford C111 C2 power steering pumps Compatible with Ford, compatible with GM, and compatible with Chrysler vehicles. The two included screws are suitable for use with Ford, for use with Chrysler, for use with GM, and for use with Volkswagen power steering pulleys. The kit even includes a quick disconnect for use with GM power steering lines.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Power Steering Pump Pulley Service Set, simply contact customer service for troubleshooting help, parts, replacement or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have pets, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization..

Compact SturdyThe compact all in one tool can be used on the front or back of the pulley. Place the tool on the pulley and turn the pulley to remove or install the elastic waistband without damage.. Premium MaterialMade of aluminium alloy, it is durable and has a long service life. The surface is smooth, wear resistant and will not damage the belt, and does not break easily.. Wide ApplicationSuitable for most bungee applications such as trucks, cars and other vehicles. Drive belts remover is a great gift for car owners who own cars and like car accessories.. Stretch Belt Mate KitElastic strap matching kit, including tools for installation and removal. Small size, easy to carry. And remove all ribbed expansion belts, check and reuse expansion belts.. Convenient And PracticalIt is more convenient to use in narrow spaces. Helps prevent belt or pulley damage during removal and installation and extends belt life..

All-in-One Solution This 49-piece harmonic balancer tool kit from Orion Motor Tech handles everything from harmonic balancers to gear pulleys, steering wheels, and crankshaft pulleys, making it essential for any auto repair job. Packed with All Essentials This steering installer tool set includes a steel yoke, pressure screw, flat shaft adapter, 2 centering adapters, and 30 bolts in popular SAE metric sizes 14-28, 516-18, 516-24, 38-24, 38-16, M8x1.25, M10x1.5. Easy to Use Simply locate the threaded holes, attach the puller with the proper bolts, and gradually tighten the center screw to lift the puller body, making steering wheel removal straightforward and hassle-free. Built to Withstand Tough Use The heat-treated centering adapters and hardened forcing screw ensure this steering wheel tool set can handle tough, repeated use while offering excellent corrosion resistance and lasting durability. Wide Compatibility With stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer removal tool set is designed to work with a wide range of cars, pickups, and SUVs.

Kit Include This harmonic balancer installer set comes with 4 long reach adapters, a nutbearing assembly for easy damper installation and a pair of gloves. Wide Compatibility This underdrive damper puller includes four threaded rods M16 x 2.0, M14 x 1.5, M12 x 1.75, M12 x 1.5, compatible with Ford, GM, Dodge, and Chrysler V8V6 engines, ensuring wide application and convenience for diverse automotive tasks. Efficient Operation Features a heavy-duty driving nut with thrust bearing for smooth operation simplifies the installation of crank and underdrive pulleys, enhancing efficiency and precision. Premium Material This long-reach harmonic pulley installer kit is made of solid steel, corrosion resistance, and durability to withstand heavy daily use. Service Assurance If you are unhappy for any reason or there is some problem with our products, you can get help from us Customer satisfaction is our top priority.

ITEM SPECIFICATIONS Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.. INCLUDES This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 38-inch square drive for use with a ratchet and a 34-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again. COMMON APPLICATIONS This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance. If you have any issues with your ARES harmonic balancer puller set set, simply contact customer service for troubleshooting help, parts, replacement, or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization..

2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc. This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.. 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.. The button makes it easily to change the puller into internal or external gear puller.. There are 5 different sizes of jaw puller for you to choose to deal with different parts small, medium and large 3, 4, 6, 8, 10.

This Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.. Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Clevis pins allow jaws to be quickly removed and installed.. APPLICATIONS This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.. Manufacture by high quality 45 steel provides extra strength and longevity with a black oxide finish for corrosion resistance.. Includes 1 x 3-jaw puller, 4 x Forcing rods, 1 x forcing screws, 1 x storage case. Dimension 38 drive forcing screw-90 mm 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm..

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more. Three jaws come with fine chrome plating to provide effective corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. Each of the three 3-jaw gear and bearing pullers can be reversed by simply flipping and repositioning to pull parts from inside or outside. The jaws can also be interchanged to accommodate different sizes and shapes, allowing for quick removal without damage or deformation. The 3-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Jaw Spread 3 inch Jaw Reach 3-916 inch Puller 3 T Maximum use range 75 mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. This size is measured by hand and may have slight errors. Please carefully confirm the size before purchasing.

25264 GM Harmonic Balancer PullerCompatible with GM LS engine models 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0L , compatible with Chrysler,Dodge,Jeep engine models 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT 5.7L LT14 series engines threaded holes, not applicable to 2018 and newer Coyote balancers.. LS Harmonic Balancer Installer Upgraded with Trust Bearing, Work for Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Fits for All GM LS And LT Series V8 Engines From 1997 To The Present 3rd, 4th,5th Generations.This tool will not work for 1991-1997 LT1 Gen 2 5.7L engines. Includes 1 Threaded Rod, 2Washer, 1Thrust Bearing, 1Flange Nut. Easy Balancer ReplacementThe HARMONIC BALANCER PULLER with 3-Jaw design provides secure grip onto the balancer allowing to remove the balancer quickly and easily, without tapped holes and radiator removal. The HARMONIC BALANCER INSTALLER with trust bearings makes installing a harmonic balancer very easy and it can be threaded into crank completely, will not break your crankshaft. This combination tool will make the job replacing balancer done more easily, save money and time.. Excellent Design The LS harmonic balancer puller adopts a clip-in design, which can be disassembled without bolting the puller to the balancer, which helps removing the balancer quickly and easily. And the LS harmonic balancer installer tool comes with hangable storage cap, which helps to store the tool conveniently.. Superior MaterialConstructed from high quality alloy steel material , it is solid, durable and no deformation .The surface is coated with black paint, which can resist corrosion and rust, ensures long-term service. And galvanized steel nuts and aluminum washers.. Satisfaction Guarantee If you're not 100 satisfied with this for gm ls harmonic balancer puller and harmonic balancer installer , simply return it for a money-back in 30 days. Support 12 months Warranty..

Complete 2-Piece Set Our gear puller set comes in two convenient sizes, 3 inches and 7 inches, making it perfect for disassembling various components such as gears, pulleys, bearings, and flywheels. Whether you're a mechanic or run an auto repair shop, these tools are essential for your needs.. Effortless Assembly With our two-step quick installation, you can have your pulley puller ready to use in just one minute. Unlike traditional pullers, our design minimizes the number of screws and nuts required, reducing the risk of loose parts during frequent hook switching.. Flexible Jaw Conversion Effortlessly switch between a two-jaw and three-jaw wheel puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.. Built for Durability Our gear puller is built to withstand tough tasks. The high-temperature quenched screw, finely processed hook and claw, and industrial-grade 45 steel construction ensure longevity. A rust and corrosion-resistant coating adds to its durability.. Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help.

UPGRADED VERSIONOur harmonic damping pulley tool has 6 jaws, 3 thicker jaws to fit older vehicle models and 3 thinner jaws to fit the newest models. Fits most new and old models.. QUICK BALANCER REMOVAL This harmonic balancer puller kit is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time. WIDE APPLICATIONS GM 5.7L V8 GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8 Cadillac 4.5L, 4.6L, and 4.9L V8 Compatible with Chevrolet Trucks 2003- 4.2L I6, 2004- 3.5L I5, 2005- 2.8L I4 Compatible with Ford 1995- V8 engines Mitsubishi Eclipse 1995- 2.0L DOHC non-turbo.. PREMIUM QUALITY MATERIAL Manufacture by high hardness steel provides extra strength and longevity with a black oxide finish for corrosion resistance.. PACKAGE INCLUDES 1 x 3-jaw puller, another 3-jaw can be replaced4 x forcing rods, 1 x storage case. Dimension 38 drive forcing screw-90 mm 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm..

Includes a disconnect tool, bushing and screw set. Pulls pulleys on GM belt driven vacuum pumps.

PRODUCT SIZE This harmonic balancer puller kit has a 3-jaw puller for a firm and secure grab, a forcing screw fitted for 24 mm drive tools, and 4 forcing rods 3-78, 5-15, 6-13, 7-35 to satisfy your needs.. EASY TO USE This 5 PCS harmonic balancer puller set is an ideal tool for removing damper pulleys in tight engine compartments without removing the radiator. Use 3 jaw puller arms with significant bite to grab and a forcing screw easily centers up to drive the rods. Easy and efficient.. WIDE APPLICATION This 3-jaw pulley puller set is compatible with Model GM 2000 Generation II Cadillac 1988 - Newer, Chevrolet Trucks 2003 - Newer, Chrysler 1990, Ford 1995 - Newer, and Mitsubishi Eclipse 1995, and more.. PREMIUM MATERIAL This harmonic balancer puller is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life.. KIT INCLUDES This harmonic balancer pulley removal tool includes 1 x 3-jaw puller, 4 x forcing rods3-78, 5-15, 6-13, 7-35, 1 x forcing screw, 1 x gloves, 1 x storage case..

1 Complete 59PCS Harmonic Balancer Puller Removal Installation Tool Kit Includes metric SAE bolts M6, M8, M10, M12, M14, M16, puller forcing screw, multi-slot bearing plate, washers and more. This harmonic balancer puller kit provides all essential components for crankshaft pulley and flywheel removal jobs.. 2 Easy Removal Installation Without Damage Quickly remove and install harmonic balancers, crankshaft pulleys, and steering wheels with this balancer puller and steering wheel puller kit. Designed to prevent damage to engine components during operation.. 3 Wide Compatibility for Most Vehicles This harmonic balancer puller and installer set fits most cars and light trucks. Ideal for flywheel removal, crankshaft pulley removal, and steering wheel pulling applications.. 4 Premium MaterialHeavy-Duty Steel Construction Made from high-strength, rust-resistant steel for durability and long-term use. Comes with a carrying case and a pair of gloves for you to wear when using the tool. Convenient to transport and store.. Compatibility Note Fits most vehicles. Does not include M12 x 1.75 bolts and is not suitable for LT1 Gen 2 or 4.0L Chrysler engines e.g., early 2000s Pacifica, 20082010 Chrysler TC Limited, Dodge Grand Caravan. Check your vehicle before use..

FOR PRESSED-ON HARMONIC BALANCERS Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers. WIDE APPLICATION Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac 1988 - Newer, Chevrolet Trucks 2003 - Newer, Chrysler 1990, Ford 1995 - Newer, and Mitsubishi Eclipse 1995. EASY TO USE Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process. INSTRUCTIONS AND STORAGE CASE INCLUDED Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case Easily take this harmonic balancer puller set from job to job. PRODUCT SPECIFICATIONS Includes Puller Body, 3-Jaw Puller, 3 Jaw Retaining Pins, 3 Wave Washers, 4 Pressure Screw Adapter Rods 4, 5-1332, 6-12, and 7-1332 Blow-Molded Carrying Case.

DIY OR PRO HARMONIC BALANCER REMOVER Removing harmonic balancers with a prybar damages components Our pully puller tool easily and safely removes harmonic balancers, vibration dampers, pulleys, and more Includes bolts for GM 3300 and 3800 V6 engines. EASY-TO-USE PULLEY PULLER Features a yoke with 4 slots, which allows for 2 or 3 hole applications The floating swivel prevents damage to shaft ends Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw. VERSATILE HARMONIC BALANCE TOOL Not just a harmonic balancer pulley puller This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit Invest in versatility. RELIABLE HARMONIC PULLER The screw tip keeps the harmonic pulley puller in place while you apply torque The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle. DURABLE PULLER TOOL The steering wheel remover's yoke is heat-treated for strength and durability Lubricate the pressure screw before using the steering wheel pullers to make the operation easier Not meant to be used with impact drills. Used to remove many harmonic balancers, vibration dampers, pulleys, or gears. Includes bolts for GM 3300 3800 V6 Engines. Comes in a sturdy blow-mold storage case.

1. VERSATILE BEARING PULLER This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels. 2. All-in-One Tool Kit Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 7-15 forcing screw, four 4-13 extension screws, four 5-13 extension screws, and two 5-35 L-type legs. 3. WIDE APPLICATION The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks. 4. EFFECTIVE OPERATION The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing the included tools enable you to reach and remove bearings in tight spaces effectively. 5. DURABLE CONSTRUCTION Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use.

1.16-PIECE SET This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 14 to 2-13 inch diameter 6-59 mm. 2.HEAVY-DUTY CONSTRUCTION These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble. 3.WIDE APPLICATION This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts. 4.EASY TO USE For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part. 5.BLOW-MOLDED CASE The custom blow-molded case keeps everything organized and easy to carry or store as needed.

UNIVERSAL REMOVAL TOOLS This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts. BETTER TOGETHER Our bearing puller set includes four puller sizes, offering maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to cover most applications. 3 JAW DESIGN These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage. REVERSIBLE JAWS Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 and 8 gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes. TOOLS FOR MECHANICS Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

1. QUICK BALANCER REMOVAL This harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time. 2. SAFE EASY OPERATION This mechanic tool set includes a 3-jaw puller for a firm and secure grip, a push bolt fitted for 24 mm hex drive and 38 square drive tools that easily centers up to drive the rods, and 4 forcing rods 4, 5.4, 6.2, 7.5 to keep your work fast and efficient. 3. WIDE COMPATIBILITY Our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, compatible with Cadillacs since 1988, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, GM Generation II engines, the 1995 Mitsubishi Eclipse, and more. 4. DURABLE CONSTRUCTION Each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity. 5. CONVENIENT STORAGE CASE This puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs.

POWER STEERING REPAIR SET This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-18, 1-14, 1-516, or 1-38 inch hub diameter. COMPLETE 7-PIECE SET This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool the reversible puller jaw design also lets you check and repair pulley flanges with greater ease. DURABLE PERFORMANCE Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use. WIDE COMPATIBILITY This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM's V6 engines the two forcing screws also work with most VW vehicles' power steering systems. USER FRIENDLY This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.

Pulls pressed on 1 and 2 grove pulleys on alternators and power steering pumps. Also removes some alternator bearings. Adjustable jaw tension. Heavy duty construction.

4Pc axle nut socket set K. Tool solutions for most all situations. Built to exceed tool standards. Strong and dependable enough to last a lifetime. Kit services many automobiles and light trucks. Tool set for removal and installation of harmonic balancers that have threaded holes. Removal pieces combo yoke, national fine center screw, center point piece and bolt pairs. Installation pieces national fine center screw, thrust bearing, forcing nut and jaw nut. Adapters included M12-1.5, M14-1.5, M16-2.0, 716-Inch-20, 12-Inch-20, 916-Inch-18 and 3416. Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.

Easy-to-Use Fits pulley hubs in 1-18, 1-14, 1-516, 1-38. The included power steering pulley removal tool makes taking off and putting on pulleys easyno hassle at all. Long-Lasting Material This power steering pulley removal tool delivering consistent performance for frequent professional workshops or home garage use. And its user-centric design is easy to navigate comes with detailed guidelines for smooth step-by-step use. User-Friendly Design Steering wheel puller kit has all the parts you need to safely and promptly remove or install press-on water pump pulleys. Features intuitive assembly and clear step-by-step instructions. This pulley puller tool cuts down time and wont damage parts easily. Fits Most Vehicles Works with power steering pulleys on most vehicles fits C111, C2 pumps and meets GM power steering pulley puller needssuper useful to keep in any workshop. Complete Kit Comes in a custom blow-molded case that keeps all parts organized and secure. The pulley puller kit includes a pulley installer, remover, 2 forcing screws, 1 sleeve, 2 puller claws, 1 disconnect tool, plus an instruction manual for easy installation.

MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications. HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust. COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles. PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization. 100 SALE SUPPORT -We back up all products for life, 247 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone.

47-Piece Harmonic Balancer Puller Set 1pc 34 pressure screw 5, 1pc steel yoke, 2pcs centering adapters large and small, 1pc flat shaft adapter, 30pcs bolts, 12pcs washers. Superior Durability Harmonic balancer puller set crafted from heat-treated carbon steel, the bolts are chrome plated and black oxidized respectively, withstand rigorous use, ensuring long-lasting performance and reliability. Versatile Applications Harmonic balancer puller set perfect for removing harmonic balancers, crankshafts, flywheels, pulleys, steering wheels and other two-hole or three-hole applications, for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, compatible with most cars, trucks, and SUVs in the market. User-Friendly Design Well-designed yokes, pressure screws and washers, pressure is evenly distributed to the pulleys, simply locate the threaded holes, install the puller using the appropriate bolts, and tighten the center screw to easily lift and remove components like the steering wheel without hassle. Comprehensive Harmonic Balancer Puller Set 38 bolts 1-12, 2, 4.5, and 6-inch, 516 bolts 3, 3.5, and 6-inch 14 bolts 2.5-inch, M8 x 1.25mm bolts 45, 65, and 90mm, M10 x 1.5mm bolts 35mm, a variety of bolt sizes are available to meet your needs in different scenarios, all equipped in a carrying case for easy storage and transportation.

Multipurpose The Stretch Belt Mate Kit is used to remove and install the belt without damaging it. Save your money and make your job easier. It can be used for most elastic belt applications such as cars, trolleys, trucks and other vehicles.. Easy to use Simply place the belt remover installer between the pulley groove and the belt. Then turn the pulley one turn clockwise to install or remove.. Unique design This stretch belt tool set provides the perfect performance and quality care for serpentine belts. It will not damage the belt when you disassemble or install the belt in the process, so that the belt can be disassembled and reused, extend the use of the belt time.. High-quality material Made of high quality zinc alloy, with smooth surface, corrosion resistance, practical to use, won't damage the belt.. All items are checked carefully and packaged in good condition. If there is some problem with our products, you can contact us and get help from us..

Removes pressed-on alternator and power steering pulleys on late-model GM and Chrysler engines.. The threaded end installs late model GM alternator and power steering pulleys, including Quad 4. This puller fits some AMC vehicles. Will NOT work on 3.3L and 3.5L Chrysler engines. Reverse the jaws to pull the alternator internal bearing.. Case Dimensions L9 xW7.25 xH2. Weight 2 lbs..

HIGH QUALITY high carbon steel construction Excellent manufacturing processexquisite mold,meticulous gringding and exquisite screws for your comfort use. KIT INCLUDESPulley puller kit also know as Power steering puller, pulley installer, pulley puller and installer kit, power steering pulley pullerinstaller, puller pulley, pulley removal tool power steering, pulley removal tool kit, pully puller set, pulley pullers tools, pully puller kit, power steering pulley remover, pulley installer and remover, power steering pump pulley puller, oem pulley puller installer kit.. EASY TO USE Designed to remove the pressed-on alternator and power steering pulleys for GM, Ford and Chrysler engines. With a reversible jaw for easy access to pulley flanges. Includes adapters for unique and typical style pulleys.. COMPATIBILITY The kit is used for removing and installing pressed-on alternator ,power steering Pump and other Pulleys ,fit on Late GM, Ford Chrysler EnginesIncludes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines. PROTECTIVE CARRYING CASE Includes a blow molded carrying case with handle that provides safe storage, quick organization, and easy transportation..

Profesional Replace Balancer Kit This kit made you to removal and install balancer a breeze, very easy to use and a must-have tool if you're changing out a harmonic balancer. Made the job very quick and easy with no damage to any engine parts,the thrust bearing design on this model is nice, removal and installation of the balancer required minimal effort, went onoff evenly and smoothly. Wide Application Comes with a number of metric and standard bolts so it should work for most applications. Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle. Specifications M16 x 2.0, M14 x 1.5, M12 x 1.5, 34-16, 58-18, 916-18, 12-20, 716-20 Black screws M10 x 1.5 x 35mm, M8 x 1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x 90mm Silver screws UNC 38 x 2, UNC 516 x 6, UNC 516 x 3-12, UNF 516 x 3, UNF 38 x 1-12, UNF 14 x 2-12, UNC 38 x 3, UNC 38 x 4-12, UNC 38 x 2, please carefully check your car's specifications. Tips This kit not fit all the vehicle, not have M12 x 1.75 bolt , Not for LT1 Gen 2 engines, not fit 4.0L Chrysler engine early 2000's Pacifica, 2008-2010 Chrysler TC Limited or Dodge Grand Caravan. Sturdy Harmonic balancer puller made of high quality heavy duty steel, has extremely strength and hardness, the surface has been coated with an anti-oxidation coating to prevent rust, so have long service life, and we offer 12 months warranty, we will refund or replace , if the tool have any quality problem.

AC Puller Installer Set for alternator and power steering pulley, including the Quad 4. Fits Pulley shafts of 1-18, 1-14, 1-38, 1-58.. Manufactured from high-strength aluminum for extra durability and longevity.. Includes a blow molded carrying case with handle that provides safe storage, quick organization, and easy transportation.. Comes complete with adapters for unique style pulleys. Has reversible split jaws for easy access to pulley flanges without damaging pulley.. Installs Removes pressed on alternator, power steering pump and other pulleys on late model GM Chrysler engines as well as most other vehicles..