PERFECT FIT FOR 2 OD-ID SLIP FIT CONNECTIONS - ROADFORMER 2 inch exhaust clamp is designed to connect 2 OD pipe into 2 ID pipe for exhaust pipe, muffler inlet, muffler outlet, elbow joint, catalytic converter, and exhaust system repair applications. STAINLESS STEEL NARROW BAND CLAMP - Made with a stainless steel band for strength, corrosion resistance, and long service life. The narrow band design provides a clean, compact fit while delivering strong sealing performance on exhaust connections. 360 CLAMPING WITHOUT PIPE DAMAGE - Roadformer Reaction Block Technology helps distribute clamping force evenly around the pipe, creating a secure seal while reducing the risk of pipe distortion, crushing, or damage to exhaust pipe ends. STRONG 10.9 GRADE BOLT FOR SECURE SEALING - Built with a 10.9 grade bolt to provide high clamping force for a tight, serviceable exhaust joint. Recommended working torque 4050 ft-lbs. For best sealing results, exhaust sealant may be applied before installation. EASY NO-WELD INSTALLATION, 2 PACK VALUE - Pre-attached hardware makes installation fast, accurate, and removable. No welding required. Each pack includes 2 pieces of 2 inch narrow band exhaust clamps for repair, replacement, and custom exhaust work.

Size joins 2.0 OD pipe to 2.0 ID pipe, width of strap 3inch76.2mm.. Application Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair.. Advantages No welding design, easy to install or remove.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 63 Nm..

Pay Attention Please measure the pipe's outer and Inner diameter before purchase. Our exhaust clamp joins 4 102.06mm- 0.2mm OD pipe to 4 ID pipe, width of strap3 inches76 mm. The thickness of the strap is approximately 0.25.08mm. Durable 304 Stainless Steel The exhaust pipe clamp is constructed from high-grade 304 stainless steel with a zinc-plated bolt for maximum corrosion resistance. This material offers reliable performance under extreme heat and harsh conditions, protecting your exhaust system with long-lasting strength. Advanced Leak-Proof Seal Our exhaust coupler I-block design creates 360-degree force distribution for a complete, rounded seal. This technology provides superior containment compared to standard U-clamps, preventing exhaust leaks and maintaining system integrity. Quick-Install Design The muffler clamps, Pre-threaded hardware and a no-weld design allow for straightforward installation and removal. The dual-bolt system resists loosening from vibration, enabling a secure connection that simplifies maintenance and service. Universal Exhaust Application The exhaust band clamp is Ideal for connecting pipes, mufflers, elbows, and catalytic converters. Suitable for automotive, performance, and industrial systems, this clamp offers a versatile solution for both repair projects and custom exhaust assemblies.

2 PIECES IN PACK 4 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 4 inch OD to ID exhaust system connection. REAL SEALING CAPABILITY Roadformer 4 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free. INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation. DURALITY RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability. FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.

SizeJoins 2.0 OD pipe to 2.0 OD pipe.T-Bolt thread size M81.25. AdvantageMade from high-quality 304 stainless steel,this V Band Clamp with Flange is designed for long-term use and can handle tough environments.It can be easily installed and removed,providing excellent sealing at the connection points. FeatureThis V Band Clamp with Flange features a male and female flange design that provides a tight and secure seal without the need for gaskets or additional components. This ensures a simple and easy installation process. MaterialThe 304 stainless steel clamp and flange and chromoly steel T-bolts are built to last and offer high reliability,corrosion resistance,and high-temperature tolerance. ApplicationCan be used for inflatable pipelines,intake pipes,diesel engines,turbochargers and heavy exhaust systems,downpipes,catback exhausts.

This deepreach clamp set is designed for any length of 34 threaded pipe, perfect for edge gluing, woodworking, cabinetry and assembly projects. Extra deep 2.5 throat depth reaches deeper into boards or large panels where standard clamps cant, improving grip in tight or hardtoaccess areas. Smooth, secure adjustment,multipledisc clutch locks firmly on the pipe while the threaded screw enables smooth, precise tightening for consistent clamp pressure. Fixed head reverses easily so the clamp can also be used as a spreader, adding versatility for cabinetry, furniture building, and repair work. Clamp fixtures feature a durable cast iron body for increased strength, wear resistance, and long-lasting performance in demanding workshop use.

-- Size Minimum Diameter 1 34 1.75 Maximum Diameter 2. -- Band Width 1 14 1.25 Band Thickness 116 .0625 Height 3 Hex Nut 15mm Metric. -- Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.. -- Seal exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. -- Save Time and Effort Distribute the clamping force evenly over the entire 360 range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort..

Size 1.75 inch inner diameter 44-49mm, suitable for 1.75 inch outer diameter pipe.. Material U Bolt Clamps made of high-quality stainless steel, corrosion-resistant and not easily deformed.. Black Zinc Coating exhaust clamps with black finish surface effectively prevents rust and corrosion, ensuring longer service life.. Function Widely used, suitable for muffler inlet and outlet, exhaust pipe inlet, elbow and pipe sealing, etc.. Easy to install The exhaust clamp is installed with bolts, no welding is required and the installation is simple and quick..

Fits 4 OD Exhaust Pipes The exhaust clamp securely connects two exhaust pipesone with a 4-inch outer diameter and one with a slightly smaller sizeensuring a tight seal for muffler inlets and outlets, elbows, and coupling pipes.. Durable 304 Stainless Steel Construction Made from premium 304 stainless steel, this U clamp has a passivated surface, making it resistant to heat, corrosion, and wear for long-term performance in harsh environments.. Reinforced and Secure Connection Evil Energy's U-bolt clamp has a thickened slot, which is much stronger and less prone to deformation, while the high-strength stainless steel nuts with anti-slip teeth ensure a tight, vibration-resistant hold and prevent the nuts from loosening.. Easy Installation, No Welding Our U muffler clamp features precision-machined threaded rods for fast and secure installation, and it is fully detachable and reusable for convenient maintenance or adjustments. Complete Installation Kit Included Comes with 2 x heavy-duty U-bolts for 4-inch OD exhaust pipes, 2 x saddles, 4 x 38-inch nuts, and 1 x wrench, ready for quick and effortless installation..

PerformanceAn auxiliary fuel tank gravity feed kit is for connecting the RDS tank to the truckfor diesel fuel only. The diesel installation kit is easy to use and can provide a stable gravity fuel supply to control the fuel level from your OE tank.. Application The 1 12 Diesel Install Kit is compatible with Ford 1999-2024 , compatible with ChevyGMC 2011-2022 , compatible with Dodge 1999-2012.OE part number of the Auxiliary Fuel Tank Install Kit is 11025, 011025. ContentsThe PQY Auxiliary Fuel Tank Kit is designed for 38 female fuel outlet fittings. The compelete kit includes 4 large hose clamps,4 small hose clamps fittings, 1black fuel hose,2rubber hose sleeves ,1aluminum tee pipe,1shut-off valve,1roll-over valve,1tape. Quatity and materialThe black tee tube surface is electrophoresis treated, looking shiny and decent which can prevent corrosion.The valve threads are also made stronger by adding anti-seize.We still advise you use tape for a better sealing.. Installation tipInstalling the diesel auxiliary tank install kit needs to close the valve to prevent gas from escaping from the tank. Please use a tool to make the rds fuel tank valve closed enough during installation to prevent spillage..

Direct replacment for your old part .Replace part numbe is 626-001 .. The hose is made of high quality slicone,sturdy and durable.. Come with 58 and 34 aluminum hose fittings ,can work for most common heater hoses.. The kit also includes hose clamps and cable ties for installation and make you get a leak-free connection.. If you have any problem ,please contact us and we will respond you In 24 hours except weekends and holidays..

REPLACE PART NUMBER154 23. Package includes 2 pack of clip clamps,can offer you spare replacement if you lost it .. APPICATIONThe PQY radiator hose clips is compatible with BMW E39 E38 E60 E90 745Li X5 E46 325i 328i M3 540i 740iL 740i.. The PQY radiator hose retaining spring clip is made of high quality metal. PQY CUSTOMER SERVICE If you have any problem ,please contact us and we will respond you in 24 hours except weekends and holidays..

Wide Fuel CompatibilityUniversal PQY fuel filter comes with AN6, AN8, and AN10 adapters for different size applications. .Can work for Gasoline, diesel, methanol, and ethanol fuel lines application . Come with mounting bracket ,and keeps the engine bar stylish and clean.. Function Designed to capture pollutant particles of 100 microns and above, providing cleaner fuel, reducing engine wear, and ensuring the normal operation of the vehicle's fuel system.. Material The PQY inline fuel filter is consisted of billet aluminum fuel filter can and stainless steel filter element ,hasbetter heat and corrosion resistance, stable structure, and is not easily deformed.. Removable Design The built-in filter element can be disassembled, making it easy to clean or replace regularly.And the two end cap of the fuel filter is special desgined which is easy for you to remove them by hand directly without tool.. Installation TipPlease check and ensure the closed end of the filter element docks with the spring,and then install the fuel filter follow the direction that the spring end is inlet and the other end is outlet which can help the fuel filter work longer..

Clamps Size T bolt clamp adjustable work range 2.91-3.1174mm to 79mm Width 0.9424mm Thickness 0.8mm0.031 the screw bolt M860mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products.. Premium Material T bolt hose clamp including the band, housing and screw is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly.. Flanging Design Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better.. Easy to Install Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque.. Wide Applications high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..

Wide Application The PQY quick release vband clamp is universal for most intake intercooler piping, turbocharged intake piping,providing a leak-free.Also ideal for racing appllication with highly advanced pressurized air applications.These quick disconnect clamps also offer you a more cleaner way to connect up custom turbo intake piping.. Construction The quick release intercooler clamp assembly is consist of aluminum band clamp with locking pin, aluminum weld furrules,rubber union sleeve and rubber seal o-ring.Comes with the Oring gaskets to seal between the flanges.Pressure rating is 800 psi.Temp. rating is 400F.. Quick Connect Clamp The aluminum quick replease v band clamp with flange is a great replacement for your original vibrant clamps and offerrs tighter tolerances and a leak-free.These v band clamp will hep you build an impressive custom intake.They can be disconnected when you do need to remove the intake piping for what ever the reason,also make you disconnect intercooler-to-throttle body tube easily .. Various Size Clamp for Your Piping We offer several sizes quick release aluminum billet v band clamp of 3 inch ,2.5 inch,3.5 inch ,4 inch,2.75 inch,2 inch.These welding clamp can be welded on fine, and seals pretty well.Please confirm your desired size before purchase.. Installation Tip Please take apart the quick release clamp and weld on the furrules first ,and wait until it cools down enough ,then reinstall the seal o-ring and clamp to avoid o-ring destroyed by the high temperature durling welding.If you are missing pin,please contact us for help .You can also find quick release v band clamp of pinless type in our store..

Wide Application The PQY quick release vband clamp is universal for most intake intercooler piping, turbocharged intake piping,providing a leak-free.Also ideal for racing appllication with highly advanced pressurized air applications.These quick disconnect clamps also offer you a more cleaner way to connect up custom turbo intake piping.. Construction The quick release intercooler clamp assembly is consist of aluminum band clamp with locking pin, aluminum weld furrules,rubber union sleeve and rubber seal o-ring.Comes with the Oring gaskets to seal between the flanges.Pressure rating is 800 psi.Temp. rating is 400F.. Quick Connect Clamp The aluminum quick replease v band clamp with flange is a great replacement for your original vibrant clamps and offerrs tighter tolerances and a leak-free.These v band clamp will hep you build an impressive custom intake.They can be disconnected when you do need to remove the intake piping for what ever the reason,also make you disconnect intercooler-to-throttle body tube easily .. Various Size Clamp for Your Piping We offer several sizes quick release aluminum billet v band clamp of 3 inch ,2.5 inch,3.5 inch ,4 inch,2.75 inch,2 inch.These welding clamp can be welded on fine, and seals pretty well.Please confirm your desired size before purchase.. Installation Tip Please take apart the quick release clamp and weld on the furrules first ,and wait until it cools down enough ,then reinstall the seal o-ring and clamp to avoid o-ring destroyed by the high temperature durling welding.If you are missing pin,please contact us for help .You can also find quick release v band clamp of pinless type in our store..

CRITICAL SIZE MATCHPack of 2 pcs. Fits hoses with an EXACT Outer Diameter OD of 74-79 mm. STOP MEASURE Please use calipers to measure the OUTSIDE diameter of your hose over the fitting before purchasing. Do not order based on the hose's inner diameter ID.. HEAVY DUTY HIGH TORQUEEngineered with double solid stainless steel T-nuts for heavy-duty clamping force. PRO TIP To prevent stainless steel thread galling seizing under high torque, we highly recommend applying Anti-Seize lubricant to the bolt threads prior to installation.. RUST-PROOF 304 STAINLESSBuilt for extreme environments. Every componentthe band, T-nuts, and heavy-duty boltsis crafted from premium 304 stainless steel. Excellent corrosion and heat resistance for long-lasting reliability on exhaust systems.. HOSE-FRIENDLY DESIGNFeatures a smooth inner wall and rounded edges to distribute clamping force evenly and protect hoses from damage. Maintains a secure connection to ensure long-term performance and hose longevity.. VERSATILE AUTOMOTIVE APPLICATIONSPerfect upgrade for motorcycle exhausts, dirt bike mufflers, turbo intercooler charge pipes, radiator hoses, and high-pressure mechanical equipment..

ApplicationCompatible with Chevy C10 LS Swap Connects GM Type 2 Power Steering Pump.. Widely Used Commonly used in fuel delivery system, fuel injection systems, turbocharger and super- charger systems, performance and racing applications,ect.. Note The pressure hose has an M16X1.5 adapter at the pump and an 1116 in.-18 flare at the steering box the Return hose has a 58 in.-18 flare at the steering box and connects to the hose barb at the pump.. Material Aluminum alloy joints, nylon braided power steering pump hose and stainless steel power steering pump hose, which are waterproof and wear-resistant, resistant to high temperature and high pressure, not easily deformed.. Function Used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions..

Application Compatible with walbro fuel pumps with 39mm Diameter1.55, including 255lph, 410lph, 450lph, 480lph and Hellcat 525lph fuel pump.. Function Designed to attach to existing fuel hangers or custom brackets. Slide the fuel pump into the bracket and tighten the screws to lock the pump in place hardware included.. Material Made of sturdy aluminum alloy, the structure is stable, resistant to impact and vibration, ensuring a firm installation and not easy to loosen or fall off.. Upgraded Design Anodized coated bracket with better corrosion resistance in ethanol setups. Can be used for ethanol fuel up to E100, methanol fuels up to M100, and all types of gasoline.. NOTE This kit is not a direct replacement of the OEM fuel pumps. This is a universal kit which will require professional modification to your existing pump hanger to fit..

This is a can with Non-Clogging airoil separation double baffle made by free flow solid no restriction design.The hoses have no logo now. Build with internal filter for better oil air separation.. The catch can increases air intake efficiently and promotes engine durably.. Stealth Mounting on Cool Side of the Motor.Keeping Oil Out of your Air Intake System. Compatible with BMW N54 335i 135i E90 E92 E82 2006-2010.

Master cylinders 0.75Bar.The?master?cylinder?output?thread?size?is?38-24.Made of high quality Metal. FEATURESoft sponge handle .Adjustable lever height.Preinstalled oil tank.. PERFORMANCEAllow?the?rear?tires?to?be?fully?locked?and?makes?the?vehicle?slide?sideway.Allow?you?to?use?the?Hydraulic?Handbrake?as?a?temporary?park?brake.. PAY ATTENTIONDo?NOT?use?the?Hydraulic?Handbrake?as?a?permanent?park?brake.The?hydraulic?handbrake?is?not?used?to?stop?the?car.. PQY CUSTOMER SERVICEWe offer 1 year warranty for the hadbrake If you have any problem ,please contact us and we will respond you on 24 hours except weekends and holidays..

3-in-1 Adapter System Comes with 12, 38, and 516 barb adapters for different size applications, fits most fuel lines.. Function Designed to capture pollutant particles of 10 microns and above, providing cleaner fuel, reducing engine wear, and ensuring the normal operation of the vehicle's fuel system.. Material The sturdy aluminum housing can withstand harsh engine environments and is heat-resistant and corrosion-resistant. The built-in filter element can be disassembled, making it easy to clean or replace regularly.. Installation Tips Please check and ensure the closed end of the filter element docks with the spring. Install with arrow pointing toward carburetorfuel rail.. Complete Kit O-rings provide a tight seal for fittings and end caps to prevent fuel leakage. Equipped with a 50mm mounting bracket to keep the engine bar clean..

Ideal for race applications with highly advanced pressurized air applications and turbo intake charge piping, while the traditional VanJen Clamp is great for everyday street applications where silicone couplers may not be the best solution.. Pressure Rating 800 psi.Temp. Rating 400F.. Size 3. Fittings, Union Sleeves and Clamps can also be purchased as separate components.. Quick Release clamp assemblies provide a leak-free, modular connection that's perfect for pressurized air applications..

Maximum pressure 800PSI, maximum temperature 400 F.. Sealing The HD clamp is sealed by is sealed by NBR O-rings.. Size 4.0 Inch101.66mm.. Application Quick release V-Band clamp provides a leak-free, modular connection that is ideal for pressurized air applications. Widely used for clamping intake intercooler pipes, throttle body, turbocharged intake pipes, etc.. Note Please install the O-ring after the welding is completed and cooled down. If not, the O-ring will be damaged by high temperature during welding, resulting in leakage..

Wide Application The PQY 4.0 inch quick release V-Band clamp is universal for 4 inch intake intercooler piping, 4 inch turbocharged intake piping,providing a leak-free.Also ideal for racing appllication with highly advanced pressurized air applications.. Advantage The quick release clamp assembly is consist of aluminum band clamp with a safety lock push-buttonwill never make you worry about losing a pin,aluminum weld furrules,rubber union sleeve and rubber seal o-ring.Pressure rating is 800 psi.Temp. rating is 400F.. Function The aluminum quick replease v band clamp with flange is a great replacement for your original vibrant clamps and offerrs tighter tolerances and a leak-free.These v band clamp will hep you build an impressive custom intake.An integrated hinge spring ensures the clamp remains in a sprung-closed position, making installation easy with the clamp aligning itself onto the union sleeve.. Size Option We offer several sizes quick release v band clamp of 3 inch ,2.5 inch,3.5 inch ,4 inch,2.75 inch,2 inch.3 inch v band clamp also available in red and blue .Please confirm your desired size before purchase.. Installation Tip Please take apart the quick release clamp and weld on the furrules first ,and wait until it cools down enough ,then reinstall the seal o-ring and clamp to avoid o-ring destroyed by the high temperature durling welding..

This 5-ply stainless reinforced silicone hose is engineered to withstand over 100 PSI at 400F. Rather than a stainless steel pipe and two silicone couplers, a single 5-ply stainless reinforced silicone hose is included to connect the intercooler to the supplied billet hose adapter assembly. This means two clamped connection points have been eliminated entirely which makes for improved reliability and MUCH easier installation. The custom molded silicone hose matches the exact contourshape of the factory intercooler piping which also eliminates the need to relocate the factory power steering reservoir. Still included in this kit is our beautiful CNC-machined billet aluminum hose adapter assembly that adapts the factory air intake valve to allow the use of a regular t-bolt clamp along with all of the clamps and hardware required to complete the installation quickly and painlessly. Material Made of high quality aluminum and silicone.

Application The Truck Tonneau Cover Installation Accessory is not a universal fittment.It only works for hard quad-fold or hard tri-fold truck bed cover.It may work for other style fold truck bed cover if it can match your part size,but it can only for hard truck bed cover.. Convenient Backups Tonneau cover clamp kit includes 4x rear clamp, 2x front clamp, 2x triangle screw, 6x T-bolt,allowing you have backups just in case something goes missing again.. Material The PQY truck tonneau cover replacement installation accessory is made of premium plastic and aluminum for durability and stability. Easy to Use This truck bed cover hardware can be installed without drilling, so no permanent modifications to your truck bed.It is easy to install, can work right away, and bring your cover back to full function.. Performance The truck bed cover clamps are designed to not interfere with normal truck bed use.secure between the bed rail and the tonneau cover edge.Most designs sit flush or low-profile along the bed rails.When the cover is open or removed, clamps can be easily detached if needed.

Maximum pressure 800PSI, maximum temperature 400 F. Sealing The HD clamp is sealed by is sealed by NBR O-rings. Size 2.5 Inch. Application Quick release V-Band clamp provides a leak-free, modular connection that is ideal for pressurized air applications. Compatible for clamping intake intercooler pipes, throttle body, turbocharged intake pipes, etc. Note Please install the O-ring after the welding is completed and cooled down. If not, the O-ring will be damaged by high temperature during welding, resulting in leakage.

Wide ApplicationThe PQY throttle cable is universal to use, can be cut to fit most applicationcan also work great on go kart and other different project.But you may need do a little modification sometime.. Stainless Braided Cable The accelerator throttle cable is made of high quality stainless steel,equipped with aluminum fittings and aluminum ferrules to eliminate fraying,which is a good replacement for your plastic sleeve type throttle cable,work great and make your pedal smooth.. Easy to Customize This stainless throttle cable has the U-cut-to-fit outer housing, is available in 24 or 36 inch lengths with a u-cut-to-fit stainless inner wire.But beware that you can not cut the braided part outer , only the inside cable can be cut.. Nice Cable Construction The covering locking throttle cable is designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation.The styles of connectors on the ends of the cable made it super easy to install.. Package include1pcs 24 inch throttle cable and 1pcs allen wrench..

This 3 inch T bolt hose clamps are 100 stainless steel, 14-28 Stainless Steel Bolt, 304 Stainless Steel 34 Band in Floating Bridge, and Nylon Insert Locknut.. Roadformer 71mm - 79mm T-Bolt Clamp Working Range Diameter 2.81 - 3.11 same as 71mm - 79mm for 3 inch Hose O.D. - not I.D. Please be noticed and suggest measure your Hose O.D. before purchasing. Our T Bolt Hose clamps are designed to use in the situation of high vibration and high pressure with great performance in keeping consistent force and long-term durability. These t bolt hose clamps are widely used in Automotive, heavy trucks, industrial machinery, off-road equipment and Agriculture industry. Roadformer TBolt Hose Clamp provide leak proof seal for hose and tube assemblies, These T-Bolt Clamps featured in outstanding performance in Anti-rust and Anti-corrosion and provide uniform sealing pressure for a positive, reliable connection even in pretty hard working environment. These T-Bolt Hose Clamps are much easy and convenient to install and use. Simply slide the clamp overlap the hose, adjust the bolt position and use a wrench or common hand tools to achieve your desired tightness. 2 Pieces in Package - ROADFORMER credited in Premium Quality and our private label products does set industry Standard.

Precise 2 OD Pipe Fitment - Designed to connect 2 inch OD exhaust pipe with matching male and female flanges. The self-aligning flange design helps improve fitment, positioning, and sealing performance for exhaust and turbo applications.. Quick Release V Band Design - The quick release V band clamp structure allows faster installation and removal compared with traditional exhaust connections. Ideal for turbo systems, downpipes, mufflers, intercooler piping, and custom fabrication work.. Leak-Resistant MaleFemale Flange Seal - Male and female flanges help align the connection inside the clamp and distribute pressure evenly around the joint. This gasketless design helps reduce exhaust leaks, vibration, and misalignment during installation.. Complete 4-Pack Clamp and Flange Kit - Includes 4 complete assemblies. For each set includes 1 V band clamp, 1 male flange, and 1 female flange, giving you a complete solution for dual exhaust connections, turbo builds, or replacement projects.. 304 Stainless Steel for High-Heat Exhaust Use - Built with stainless steel clamp and flanges for corrosion resistance, high-temperature durability, and long service life in demanding automotive exhaust environments. Suitable for turbocharger, downpipe, muffler, exhaust, and intercooler systems.. Premium High Quality - Polished Finish and Precise Machining, 304 Stainless Steel Clamp and Flanges Silver Plating T bolt and very special self-locking Nut - all are made in high quality materials to ensure durability, reliability, leak-free and anti-corrosion even working in very hard environment.

Leak-Free Exhaust Seal Designed for maximum efficiency, this 2-inch V-Band clamp ensures a tight, reliable seal, eliminating exhaust leaks in turbochargers, downpipes, and performance exhaust systems. Reduce backpressure and optimize engine performance with a precision-fit connection.. Secure Vibration-Resistant Fit Built for high-performance applications, the NGR Performance V-Band Clamp ensures a secure, rattle-free connection even under high heat, vibration, and extreme driving conditions. Engineered for racing, street, and turbocharged vehicles, this clamp keeps your exhaust system locked in place.. Premium 6061-T6 Aluminum Construction Made from lightweight, high-strength aluminum, this V-Band exhaust clamp provides exceptional durability and corrosion resistance, built to withstand extreme temperatures, vibrations, and high-performance driving conditions.. Male-Female V-Band Kit This complete V-Band Clamp Kit includes two precision-machined flanges 1x male, 1x female and 1x heavy-duty clamp, ensuring quick assembly and hassle-free maintenance. Perfect for frequent modifications or part replacements.. Universal Fit Versatile Compatibility Designed to fit 2-inch exhaust systems, this high-performance V-band exhaust clamp is compatible with various vehicles, including turbocharged, supercharged, and naturally aspirated setups.. Exclusive Color Options for a Custom Look NGR Performance is the only brand offering V-Band Clamps in stylish finishes. Available in Gold, Neochrome, and Black, these stainless steel exhaust clamps add a sleek, custom touch while maintaining superior corrosion resistance.. Effortless Installation Removal Designed for quick and easy installation, this bolt-free exhaust band clamp allows for fast component swaps, eliminating the hassle of traditional exhaust flange connections.. Proven Quality Warranty Backed by NGR Performance, a trusted name in the automotive industry, this v-band kit is built for reliability and performance. Comes with a 1-year warranty for peace of mind..

This heater core hose is made of high quality silicone rubber,comes with 2pcs stainless steel clamps. The hose is used to adjust the heater hose outlets of your LSLT engine water pump,can be a direct replacement for your entire failed heater core. Hose Ends Size One end is 58 and the other is 34. Compatible with 98-up LS LT GEN 3 4 5 Engine with 58 and 34 heater supply and return ports.. PQY CUSTOMER SERVICEIf you have any problem ,please contact us and we will respond you in 24 hours except weekends and holidays..

Made of high quality 304 Stainless Steel .. 3 Tube Diameter .. No installation instruction included .. If you have any problem ,please contact us ,we will respond in 24 hours except weekends and holidays..

The Overflow tank connected with the radiator is sufficient to catch any overflowing coolant, which capacity is 20 ounces.. The Radiator Coolant tank with the overflow vent in the bottom,once the liquid gets to a certain level, built-in long tube which extended into the container will spills out to prevent leakage.. The Coolant Overflow Puke Tank is made of high quality stainless steel and polished surfacerust resistant and corrosion resistant for optimal durability and longevity.. The overflow coolant tank can work for most hot rods and classic engines.. Package includes 1pcs Stainless Radiator Coolant Overflow Reservoir Tank with Twist-On Aluminum Cap installed with 2pcs brakect ,2 pcs clamps and bolts for installation..

FIT FOR Complete V-band kit is ideal for turbos, waste gates, blow-off valves, exhausts and more.. FUNCTION One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal.. ADVANTAGESeasy onoff--V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut.. MATERIAL One 304 Stainless Steel V-band clamp.. SUPPORT At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems..

PRECISION WORKThis Spark Plug Gap Tool will give you that perfect gap every time.Simply place your spark plug onto the gap tool perfectly.. UNIVERSAL FITMENTUniversal for 10mm 12mm 14mm 16mm Spark Plugs.Used your desired size feeler gauge for gap thickness.. NOTE Some spark plugs electrode will spring back - This is normal for some spark plugs.If your gap target is 0.44mm we suggest to use 0.42mm this way when it spring back you will get it to 0.44mm.. WHAT YOU GET1x spark plug gap tool. WARRANTYPQY offers 1 year warranty for the tool.If you have any problem ,please contact us and we will respond you on 24 hours except weekends and holidays..

Premium 304 Stainless SteelCrafted from high-quality 304 stainless steel, this V-band clamp offers excellent corrosion and rust resistance, ensuring longevity and durability under tough conditions.. Quick Release MechanismDesigned for user-friendly operation, the quick-release feature allows for easy installation and removal of intercooler systems and turbine components, facilitating efficient maintenance.. Versatile ApplicationsThese V-band clamps are perfect for various applications, including exhaust systems, turbochargers, diesel engines, and more, providing reliable fastening solutions for charge piping and intake systems.. Simple InstallationEngineered with a machined ridge, this clamp ensures a precise fit for welding, allowing for seamless joints between pipes while eliminating the need for gaskets or additional sealing components.. Wide Size SelectionAvailable in multiple sizes, our V-band clamps can accommodate a variety of pipe diameters, ensuring that you have the right solution for your tightening needs across different applications..

Size joins 2'' OD pipe to 2'' ID pipe, width of strap 2.94inch 74.82mm.Accurately measure the outer diameter of the pipe before placing an order. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Advantage No welding design, easy to install or remove.. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 63 Nm.. Application Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.

The pipe is made of high quality 304 Stainless Steel .. 2.5 Tube Outer Diameter .. No installation instruction included ,professional installation is recommended.. If you have any problem ,please contact us ,we will respond in 24 hours except weekends and holidays..

Size This lap joint clamp joins a 2.5 OD pipe to a 2.5 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

2 Exhaust ClampsGet 2 durable 4 exhaust clamps in one package, no need to buy extras for replacements. Quality Galvanized Iron Material thicker more rust-resistant than standard clamps, with heat-resistant silver coating. Perfect 4 OD Fit Specifically sized for 4-inch outer diameter pipes, ensuring leak-free sealing.. No-Weld InstallationHeavy-duty U-bolt and saddle flange design installs in minute,no welding required just tighten the 38 nuts Creates a tight seal to prevent exhaust leaks and noise.. Beyond Exhaust Use also works for compressing hoses, Securing fence gates, Fixing gas exhaust tips.

Size This narrow band clamp joins a 2-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more..

Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they dont do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.. Lets make racked panel glue ups a thing of the past The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.. Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.. Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2s 2 x 4 ripped in half with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.. This clamp package comes with two full 4 way pressure clamp assemblies. Includes 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included..

Size joins 2 inch OD-ID slip fit pipe, width of strap 1.22inch 31mm.. Application Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Advantage No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation.. Material 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The band clamps make the force of 360 evenly distributed to provide a seal. Torque 63 Nm..

Basic Parameter- Max opening 24 Load limit 300 lbs Reach 3-13 from edge of bar to center-line of screw Advancing handle glass-filled nylon Bar 1434 plated, round-edge, high-carbon steel.. E-Z HOLD II Design- Not only can these versatile clamps be easily converted into a spreader clamps, also allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single clamp.. One-Handed Clamp- These bar clamps combine the speed and ease of single-handed use. With 3-13 inch reach and furnished with soft and durable plastic pads. As a standard, quick-acting, one-handed clamp, the patented, innovative sliding head maintains substantially higher clamping forces.. Features- The contoured comfort grip and quick release lever make it simple to get a firm grip in a flash. The unique in-line advancing handle provides comfort and ease of the use, permits greater travel per squeeze. These unique bar clamps are some of our easiest to use clamps and are ideal for hobby, craft and model projects.. Application Occasion- Suitable for a wide range of woodworking..

Ultra 4K HD resolution 4 times the resolution of a typical HD webcam look your best and enjoy professional video experience wherever you are with 5x HD zoom.. Auto light adjustment Logitech RightLight 3 uses HDR technology to show you in the best light, even in low-light and backlit situations.. Noise-canceling technology Dual omni-directional mics suppress background sound so you can be heard clearly.. 3 field of view presets Choose 90, 78 or 65 dFOV via Logi Tune to include more of your environment or narrow the focus on you.. Up to 90 fps Create high-quality video recording or streaming in any light condition.. Windows Hello integration Easily and securely sign into your computer without a password.. Privacy shade Flip up or and down to cover or expose the lens.. Works with Windows, Mac, or ChromeOS and popular calling and streaming platforms 1 year limited hardware warranty..

HIGH QUALITYMade of high quality rubber cushioned stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable. When installed, you will no longer worry about them rusting and breaking.. SIZE QUANTITYThis 52pcs cable clamps assortment kit includes 6 different sizes for you to deal with multiple different situations. It includes 14 inch 12pcs, 516 inch 10pcs, 38 inch 10pcs, 12 inch 8pcs, 58 inch 8pcs, 34 inch 4pcs.. UNIQUE DESIGNThe rubber on the clamp can help prevent vibration and impact from clamp edges on the held objects. The width of whole clamp is 19mm, which is wider than most rubber cable clamps on the market. More sturdy to protect the tubes well and hold the pipes firmly in place.. EASY TO USEThe installation is easy, just find a correct clamp and put it into wirespipes, tighten it with M6 screws. Comes with a convenient plastic case with size chart, making it easy to find correct rubber clamps quickly, saves your time of running around looking for a particular size.. WIDE APPLICATIONIt is very suitable to apply in automotive, industrial, boatship, windshield, household and other indooroutdoor application for wiring, cables, pipes, racks, line management and repair..

Cast Turbo Elbow Adapter Vband Flange and Clamp Kit, One Pair.. Vband flange allows rotation of the turbo at any angle. Flange is threaded with 8M10x1.5 holes. T3 T4 to 3.0 V-Band,works for Many Turbo Applications.. 304 Stainless Steel Cast and Machined Adapter, with Tight Radius.. Designed and built for improved performance gains, with excellent fitment and easy installation..

Features100mm 4 Length,can be used with any size fitting from -3 AN to -32 AN,and feature magnetic backs, allowing quick setups and easy transfer between vises.. ApplicationUse on Any Metal Vise, Magnetic Reversible Pads, Clamps Flat or Round Products, Fit Wide Array of Vises Vices and Vise Blocks. Excellent designOne side Flat, one side multi-groove,Prismatic, v-pads, protector for Barrels, woodwork, mechanics. Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum Material. Vise jaw inserts hold the hex part of aluminum fittings during assembly to minimize scaring and marking of aluminum hose fittings like the ones made by the Aeroquip, Earls, and Russell brands..

Comes with 7 pcs Hose end Replacement forting. Made of high quality T6061 Aluminum-6AN size 3pcs stainless steel Braided fuel hose.. Comes with a fuel pressure regulator-6AN inlet ports and return port. The oil in the gauge stabilizes the needle to give you the most accurate readings. Make the accelerator more sensitive and relaxed. No installation instruction included. Professional installation is highly recommended..