Designed for Accuracy - KEMIMOTO UTV tail light is compatible with the 2018-2026 Polaris Ranger 1000 Crew 1000 XP 1000 Crew XP 1000, fits both driver and passenger sides, and replaces Part 2413766. Designed for Quick Setup - Simple plug play method. No cutting or modifications are needed, just disconnect the old taillight and connect the new one. Installation can be completed in just 5 minutes. Make for Multiple Uses - This tail light doubles as a running and brake light Heads up It doesn't function as a turn signal. IP65 Water-Resistance - These tail lights come with a sealed waterproof design, boasting an IP65 rating to withstand heavy rain, dust, mud, and snow. Built to Endure - These side lights are constructed from tough high-density ABS material for durability. With 12pcs 3528 LEDs in each tail light, they shine more intensely and stay lit well beyond 30,000 hours.

Perfect Fit KEMIMOTO utv tail light is compatible with Polaris Ranger 1000 2015-2017 , Ranger 570 Fullsize 2015-2019, Ranger XP 900Crew 2013-2019, Brutus HD, and General XP 1000 EPS XP 1000 XP 4 1000 2017-2021. It directly replaces for OEM 2412774 2411866 and is suitable for both the driver and passenger sidesNote Package includes 1PC only. Long-lasting Engineered for 50,000 hours of reliable performance, these ABS tail light with 3528 LEDs enhance visibility in low-light and harsh weather conditions, keeping you safe on the road. IP65 Protection Rating Featuring a seamless, highly sealed housing that meets IP65 standards, this taillight effectively withstands water, dust, and vibrations. Performs reliably in harsh weather conditions like rain and storms. Multi-Function Design The KEMIMOTO taillight serves dual purposes as both a continuous running light and an activated brake light Note Turn signal functionality is not included. 5-Minute Install Simply replace - unplug the old, plug in the new. No wiring changes required.

STROBING BRAKE LIGHT - A 5 minute installation of this Eagle Lights tail light will take your safety to the next level. Our pre-wired light has a built-in strobe function that lets you be seen from 3x farther away. When you activate the brakes, the light strobes in intervals of 3 for maximum noticeability and turn solid red. It is the ultimate upgrade to keep you out of harms way.. EASY INSTALLATION - Install right out of the box. The light harness plugs directly into your bike and includes a running light and strobing brake light. No load resistors are required for installing the brake light.. DIRECT REPLACEMENT - This light directly replaces the stock rear tail lamp on many HD motorcycles. Fits Street Glide and Switchback models with a bottom mount license plate.. MAXIMUM VISIBILITY - The perfect upgrade for your Harley Davidson. Be seen from 3X farther away with this extremely bright running and brake light. With high quality ABS housing, ploy-carbonate lens and high intensity LED bulbs, you can stay safer and light up the night.. EAGLE LIGHTS LIFETIME WARRANTY - Our light and motorcycles parts are made to last as long as your bike But should something go wrong, you are covered by a full LIFETIME warranty. No hassle returns and no hassle warranty replacement..

Compatible with 2008-2011 Cross Bones FLSTSB,2014-2016 CVO Limited FLHTKSE,2008-2013 Dyna Fat Bob FXDF, 2002-2009 Dyna Low Rider EFI FXDLI,2002-2009 Dyna Low Rider FXDL, 2014-2017 Dyna Low Rider FXDL,2006-2008 Dyna Street Bob EFI FXDBI,2006-2008 Dyna Street Bob FXDB, 2005-2011 Dyna Super Glide Custom EFI FXDCI,2005-2014 Dyna Super Glide Custom FXDC,2013-2015 Dyna Switchback FLD,2002-2008 Dyna Wide Glide EFI FXDWGI,2002-2008 Dyna Wide Glide FXDWG,2005-2011 Dyna Super Glide Custom EFI FXDCI. Replacement for 2005-2014 Dyna Super Glide Custom FXDC,2008-2011 Electra Glide Classic EFI FLHTCI,2011-2013 Electra Glide Classic FireRescue FLHTC,2008-2013 Electra Glide Ultra Classic Shrine SE FLHTCU,2010-2015 Electra Glide Ultra Limited FLHTK,2002-2017 Fatboy FLSTF,2007-2011 Fatboy Peace Office SE FLSTF,2010-2016 Fatboy Lo FLSTFB,2016-2017 Fatboy Lo S FLSTFBS,2014-2017 Forty Eight XL1200X,2003-2017 Heritage Softail Classic FLSTC,2007-2014 Heritage Softail Classic Peace Officer SE FLSTC. It's time to upgrade your harley led tail light, classic black makes your motorcycle tail lamp more dazzling and add new features to the motorcycle in appearance. smooth and double coated rear lamp surface, hard and durable ABS plastic to protect the blinker lights running lights from minor impact effectivly and not faded for long time use. Increased rear visibility, easy to notice by others vehicles on road for safety driving. Easy to install, just need to remove stock tail light, before replace new black tail lamp,please indsert the adaper into to corresponding holes to make sure new tail light works, screw it up. Package come with 1 piece Harley Led Tail Light 1 piece use manual..

3 In 1 Driving lightsWhen the tail lights are activated,the red breathing mode is scanned four times before switching to a constant red lightLow Bright Red LightTurn signalLeftRight sequential flowing turn signal led lightBrake lightWhen braking,it flickers four times and then switches to a constant red lightHigh Bright Red Light .. Connection guidance Black line - negative pole, white line - running lights, red line - brake lights, yellowgreen line - turn signal. If your motorcycle has dual flashing function, our product also has this effect.. Ultra high brightness equipped with a 60LED chip, the visibility reaches its maximum value day and night, and the working voltage is DC 12v-80v, suitable for motorcyclesATVScooterBikeTruckTrailer and Golf Car.. Good waterproof function Fully sealed design with IP67 waterproof rating, even in rainy weather, it can be used stably.. Professional Service We are committed to providing good customer experience, if you have any questions about our product, please do not hesitate to contact us..

OEM FITMENT --This rear tail light compatible with Polaris Ranger 900 1000 570 Full Size Brutus HD General. Replacement for OEM Part Number 2412774 QTY 1. Please confirm OEM part number before purchase.. PLUG PLAY --The Ranger 900 XP tail light is easy to install. Direct replace your stock ranger taillights. No modification required. Fits driver-side and passenger side both.. SUPER BRIGHT --With 14PCS high intensity LED chips, this Ranger 1000 XP tail light are brighter and energy saving, more than 30000 working hours.. HIGH QUALITY --Our Ranger 1000 tail light is made of premium ABS and PC materials, which are anti-scratch, waterproof and more durable.. PACKAGE INCLUDE --1 PCS Red Ranger LED Tail Light for Polaris. Sold each NOT 2PCS.

Compatibility compatible with yamaha bear tracker big bear bruin grizzly wolverine bruin viking rhino ATV models, replace part number 5KM-8472C-10-00, 5KM-84710-01-00. Super Bright Built in 22 pcs SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety. 3-in-1 design, acting as tail light, brake light and license plate lights. Best replacement for dull stock taillight. Durable and Waterproof Made of high quality ABS plastic, anti-scratch and not easy break, well-sealed on the edge, effectively keep water out of housing, stay illuminated in rainy days. The smoked lens give your ATV motorcycle a cool and modern appearance. Easy Installation Just splice wire into existing wire harness, 4-wire configuration, red wire for brake light, blue wire for running light taillight, yellow wire for license plate light and black wire for negative. Package Including1 Pcs red led motorcycle tail light atv taillight brake lights..

DURABILITY UPGRADE - Our glossy-coated baseplate replacement, crafted with durable ABS material, adds a touch of premium quality. Stand out on the road with confidence and True Mods' exceptional craftsmanship.. RIDE ON, SCRATCH-FREE - Say goodbye to those pesky scratches Our baseplate replacement has a protective foam pad that keeps your Harley Davidson pristine during and after installation. It is time to ride in style and keep your hog flawless. PERFECT FIT - Effortlessly upgrade your Harley bikes with our baseplate replacement. stainless screws to secure the tail light and circuit board are included, ensuring a seamless install experience and getting you on the road faster with style.. 2 COLOR OPTIONS - Choose from badass Black or shiny Chrome for your Harley baseplate replacement. Get the perfect look that matches your bike's personality.. COMPATIBILITY - Perfect alternative of OEM Part 68296-99A on 2000-2023 Harley Davidson OEM Fenders with PN 68296-99A. DOES NOT Fit 2018-2023 Softail models or 2012-2016 Dyna Switchback FLD..

Perfect Fitment Compatible with UTV models including 2018-2019 Ranger XP 900, 2020 Ranger 1000, 2015-2020 Ranger 570, 2014-2015 Ranger Crew 900, 2018 Ranger Crew XP 1000, 2019 Ranger Crew XP 900, 2013-2016 Polaris Brutus HD, 2019-2020 PRO XD 4000D, and 2020 PRO XD 4000G. Replace part number 2412774.. Super Brightness Equipped with high-power SMD LEDs per tail light, these lights are brighter than traditional incandescent bulbs. The super bright light output ensures excellent visibility while driving, enhancing safety. They function as both running lights and brake lights, offering the best replacement for dull stock taillights.. Waterproof Design Constructed with high-quality ABS plastic and featuring effective edge sealing, these tail lights are highly waterproof. They will remain illuminated even on rainy days, providing reliable performance. Operating at 12V, they have low power consumption and a long lifespan.. Easy Installation Designed for plug-and-play installation, there is no need for cutting or wiring. The installation process can be completed within 5 minutes. Simply remove the original taillights and replace them with these LED tail lights. The lights offer two-level brightness, with low intensity for tail and running lights and high intensity for brake lights. They provide a sleek and clear look to enhance the appearance of your UTV..

IP67 Waterproof RateHighly sealed connector of IP67 waterproof rate and the Polycarbonate Lens, efficiently anti-corrosion and anti-crash, protecting the fog lights from different weather conditions.. High QualityDOT SAE approved, sharp cut-off light and higher light output ensures no stabbing of others' eyes while providing the brightest and widest field of vision, durable shield that can withstand any extreme use conditions such as desert, stained weather or rain and fog. No flicker and good heat dissipation to protect the taillamps in different weather conditions.. Easy InstallationThe taillights are fits for Polaris RZR 900 2015-2019, RZR XP 1000 2014-2018, RZR 4 XP 1000 2014-2018, RZR 4 900 2015-2018, RZR S 900 2014-2019, RZR XP 2016-2018, RZR XP 4 2016-2018, RZR XP 4 1000 2014-2018, RZR Turbo 2014-2018. Plug Play, direct replacement of the original tail light without replacing any screws.. Precision TechnologyThe high quality LED chip uses new optical technology, the precision optical technology provides a highly controlled light pattern to improve visibility and a brighter chip. Therefore, you can see the road more clearly and drive safely on the road.. Atubeix GuaranteeWe have it in spot and you can assemblies the replacement very quickly .We offer a 30-day return guarantee and a 1-year warranty. If there are any quality problems, please feel free to contact us and buy directly.

BROAD COMPATIBILITY WITH CAN-AM MAVERICK X3 Fits Can-Am Maverick X3 XDS XRS Max Turbo R 2017-2025 all models, including turn signal kit upgrades replaces OEM part 710004744 for precise rear tail light installation check compatibility list for details.. BRIGHT LED PERFORMANCE YELLOW TURN SIGNAL High-quality LED beads with low power consumption deliver brighter, concentrated light source features yellow turn signal lights for enhanced driving safety and modern cool appearance on your Can-Am X3 lights setup.. DURABLE ABS CONSTRUCTION FOR ALL WEATHER Crafted from high-reliability ABS plastic with IP67 waterproof protection and internal mechanism to prevent flickering or failure ideal for Can-Am Maverick X3 tail light in harsh conditions, ensuring long service life.. STYLISH SPORTS DESIGN TECH UPGRADE Unique sports elements with full LED taillights design add technological sense and cool aesthetic energy-saving and high-brightness for Can-Am X3 accessories, working reliably in all weather without high maintenance.. PLUG PLAY INSTALLATION FOR EASY SETUP Quick and easy plug play installation with included 2PCS LED tail lights and instructions no modifications needed for Can-Am Maverick R lights or X3 models refer to installation video contact support for any assistance..

WIDE APPLICATIONPBYMT Tail Light Base Plate Conpatible with 2000-2023 Harley Davidson models originally equipped with OEM part number 68296-99A. NOTE Not compatible with Softail models 2018-2023 and Dyna Switchback FLD models 2012-2016.. LONG-LASTING MATERIALSThe rugged ABS plastic construction of the PBYMT baseplate ensures reliable defense. Its stiffness and impact resistance safeguard the part from road debris, vibrations, and the stresses of installation.. THE PERFECT FITPBYMT replacement baseplates are precision-engineered to integrate flawlessly with your taillight, ensuring a rigid mount for enhanced stability and performance on the road.. ONE-CLICK INSTALL Designed for effortless one-person installation, this baseplate features an intuitive alignment system. Just line it up with the vehicle's existing slots, press to engage, and tighten the screws. You can achieve a rock-solid fit in under 60 seconds.. PACKAGE OVERVIEWThis kit includes 1 Black replacement baseplate, complete with the necessary fasteners 1 flat washer and 3 cross round head screws..

OEM FITMENTThis rear tail light compatible with Polaris Ranger 400 570 800 EFI MIDSIZE. Replacement for OEM Part Number 2411450 QTY 1. Please confirm OEM part number before purchase.. PLUG PLAYEasy to install. Direct replace your stock ranger taillights. No modification required. Fits driver-side and passenger side both.. HIGH QUALITYOur LED Taillight for Ranger made of premium ABS and PC materials, which are anti-scratch, waterproof and more durable.. SUPER BRIGHT With 10PCS high intensity LED chips, this Ranger 400 570 tail light are brighter and energy saving, more than 30000 working hours.. PACKAGE INCLUDE1 PCS Ranger LED Tail Light for Polaris. Sold each not 2pcs.

WIDE COMPATIBILITY The motorcycle led license plate light is compatible with models featuring 34 axle holes. The motorcycle led rear light is fit for Harley Sportster Chopper Bobber Honda Yamaha Suzuki Kawasaki.. 300 BRIGHTER SMD LEDsThe motorcycle license plate LED brake light are 300 brighter than halogen lights. The motorcycle led tail light provides more visibility and safety when riding.. 50000 HOURS LIFESPAN The motorcycle license plate tail light is protected against short circuits for safety and reliability. The motorcycle LED rear light housing is made of rustproof aluminum for built to last.. IP67 UPGRADED WATERPROOF The motorcycle LED brake light features a waterproof design to protect the internal wires. This enhanced waterproof can withstand heavy rainstorms and harsh weathers.. 3 LIGHTING MODESThe motorcycle side mount LED rear light provides 3 lighting modes running light brake light license plate light. Also, the motorcycle license plate light with bracket can be mounted left and right side.. WHAT YOU WILL GET The package includes 1 motorcycle LED brake light 1 34 axle hole license plate bracket set license plate not included. If you have any questions, kindly message us..

Wide Compatibility This 12V motorcycle tail light is designed to fit for most universal Street Bikes, Cruisers, Choppers, Bobbers, and Cafe Racers. Compatible with popular brands like Harley, Honda, Kawasaki, BMW, Yamaha, Suzuki, Ducati, Benelli, Aprilia, and more.. 200 Brighter with 90 Ultra-Bright LEDs Equipped with 90 high-intensity LEDs, this motorcycle brake light delivers up to 200 more brightness than standard lights. Enhanced illumination boosts visibility in all conditions.. 40,000 Hour Lifespan Built with durable LED circuit boards and short-circuit protection, this motorcycle LED rear light offers a reliable service life of over 40,000 hours. Its IP67 waterproof rating ensures stable performance in all weather conditions, from heavy rain to dusty trails.. Enhanced Mounting Flexibility We've added 2 extra installation holes, providing a total of 4 mounting points to reduce the need for retrofitting and allows compatibility with a wider range of license plates. While most other brands of motorcycle license plate light offer only 2 mounting holes, often requiring modifications for proper fit.. 5 Lighting Modes 5-Wire Design This LED motorcycle tail light features 5 lighting functions running light, brake light, left turn signal, right turn signal, and license plate light. It comes with 5 dedicated wires for straightforward, hassle-free installation and reliable performance.. Whats in the Box 1 LED motorcycle tail light license plate not included, 2 screws, 2 spacers, 2 nuts, and 1 user manual.Note Some license plate sizes may require minor modifications for proper fit..

PERFECT FIT Direct replacement red tail light housing specifically compatible with Kawasaki Mule 500 520 550 600 610 2010 2020 2030 2500 2510 2520 3000 3010 3020 4000 4010 SX 1990-2020. Replaces OEM 23026-1019. Please verify fit using our detailed compatibility list in the description. STRONG AND DURABLE XATVXUTV tail light housing for Kawasaki Mule crafted from premium, high-transmittance plastic that's scratch-resistant and won't fade even of exposure. Features superior waterproofing to seal out rain, dust, and debris, provides protection for the internal bulb and extends the life of the tail light. HIGH LIGHT OUTPUT Rear brake stop lamp cover precision-engineered for exceptional light transmission, will not weaken the light. Delivering crisp, bright illumination that makes your UTV highly visible day or night. Enhanced awareness on the trails, people behind you will clearly notice you. EASY INSTALLATION Direct replacement, quickly installs simply swap out your old, broken, cracked, or faded tail light cover. Provides renewed protection for your tail light assembly. Note Bulb NOT Included. PACKAGE INCLUDES 1PC Red Tail Light Housing Lens. If you need 2 tail light covers, you need to place 2 orders.

Fitment Precisely engineered to fit 2023.5-2025 Harley Touring models, including CVO Street Glide FLHXSE, CVO Road Glide FLTRXSE, Street Glide FLHX, Road Glide FLTRX, CVO Road Glide ST FLTRXSTSE. These LED saddlebag lights complement the factory design, giving your bike a modern, integrated look.Notewill Not fit 2026-later Touring models. 4-in-1 Functionality Enhanced Visibility These multifunctional LED lights serve as running lights, brake lights, sequential turn signals, and strobe lightsoffering all-around illumination for safety and style. The lights glow bright red during normal running and braking conditions, while amber flow-effect turn signals activate when signaling. A sequential blinking pattern provides increased visibility, especially in low-light or high-traffic environments. Premium Material Durable Weather-Resistant Constructed from ABS plastic, these saddlebag lights are built to endure long-term exposure to sun, wind, rain, and road debris. The smoked lens not only delivers a sleek, stealthy look but also offers enhanced impact resistance and optical clarity, ensuring consistent lighting performance through all riding conditions. Plug Play Installation No complicated wiring required. Just plug into your existing system using the included wiring harness.Be sure to purchase the correct connectors based on your bikes year and model. Package Included1 pair of LED saddlebag lights left and right and a complete wiring harness for fast setup.

All in One Newest tail light with running brake integrated turn signal lights, brighter than stock tail light with smoked lens, making driving more safer. Built in turn signals function is really get drivers attention. The license plate light above the tail light, illuminate license plate well, upgrade your stock tail light.. Application Directly replace stock taillight, compitable with Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, 1991-2010 FLST Models except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE All 2002-2010 FXST Models except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCWC1991-2010 Electra Glides except 2005 FLHTCSE, 2009 FLHT Standard.. Style High intensity led chips, Increased rear visibility, Easy to notice by others vehicles on road for safety driving. Lay Down Style,low profile design tail light, which is angled to follow the curve of your stock fender for the customized look. Sealed better with gasket prevent water to infiltrate, made lifespan more longer.. Wire Diagram 12V DC, Black Wire - Negative White Wire - Running Light Red Wire - Brake Light Yellow Wire - Right Turning Blue Wire - Left Turning. Upgrade the plug for wires, Base on the wire diagram, insert the white red wire into the corresponding slot, then directly plug. Easy to install the led tail light. Integrated turn signal lights, blue wireturn left and yellow wireturn right connect to your stock turn signal light.. Package 1 PCS Smoked LED Tail Light 1 PCS Gasket with friendly customer service..

Plug N Play MOVOTOR tail light with runningbrake integrated turn signal lights, brighter than stock tail light with smoked lens, upgrade the turn signal plug, directly plug and play, easy Install. Lay Down Style, which is angled to follow the curve of your rear fender for the streamline look.. All-in-one Functions This movotor taillights can be used as running light, brake light, turn signal lightturn leftright. White Light used as license plate light The brake light and turn signals light built together. Providing good visibility, it makes your driving much safer.. Fitment Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSEAll 2002-2010 FXST Models except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCWC1991-2010 Electra Glides except 2005 FLHTCSE, 2009 FLHT Standard.. Specifications Voltage 12V DC High intensity 60pcs led chips, Increased rear visibility, Easy to notice by others vehicles on road for safety driving. Lifespan above 30000 hours Wire for functions Running--White Wire, Brake--Red Wire and Turn Signal Yellow wire-- right turning Blue wire-- left turning Black wire--Negative.. Package 1 Piece Low Profile Smoked Led Tail Light 1 piece Gasket, come with the gasket to prevent water infiltration. Warranty12 months quality warranty make sure you get risk-free tail light.Any product installtion issues, feel free to contact MOVOTOR via amazon message center, Notes Login your amazon account choose Your orders find the order ID click Contact seller..

COMPATIBILITYDesigned as a direct replacement for LTR450, Quadracer 450, and Quadsport-style ATV platforms. Replaces part number 35710-45G00.. EASY TO INSTALL This LTR450 tail light is plug and play. Using the harness connector, plug the 3 wires into the connector and into your ATV. Black--Negative Brown--Tail light Red--Brake light. Before plug into connector, ensure that the function corresponding to each wire is the same as the stock one.. HIGH QUALITYOur ATV LED Taillight made of premium ABS and PC materials, which are anti-scratch, waterproof and more durable.. SUPER BRIGHT With high power LED lamp beads, this rear tail lamp outshines traditional incandescent lamps. And when you hit the brakes, you'll grab everyone's attention.. PACKAGE INCLUDED1 LED rear tailbrake light for LTR450-style ATV applications. Sold individually.

Compatible-Fit for Kawasaki Z400 2018-2024, for Ninja 400 2018-2024, for Ninja Z1000 2013-2024, for ZX-10R 2016-2025, For Ninja ZX-6R 2019-2025Please refer to the compatible list in the listing, and check the year and model of your motorcycle before purchasing it. Material-This integrated taillight housing is made of ABS plastic materials, which is lightweight, durable and wear-resistant. High-quality LED lamp beads provide a brighter and wider light source to improve your driving safety. And the PC lenses are more conducive to the transmission of light sources. Features-This smoked taillight has three lighting modes running lights, reversing lights, and turn signals. The red and amber lights make your signals more visible and reduce your driving risks. IP67 waterproof, no need to worry about water leakage. Can directly replace the old broken tail light, perfectly suitable for your motorcycle. Easy to install, plug play need some wiring harness testing, no additional drilling and purchasing required. Please refer to the installation video in the listing before your installation. Package includes 1 PCS of taillights with a set of installation hardware and an installation manual. If there is any problem during your installation or received damaged products, please contact us on Amazon.

COMPATIBILITYThis Aftermarket ATV led Tail Light compatible with Yamaha Bear Tracker Big Bear Bruin Grizzly Wolverine Bruin Viking Rhino ATV models, replace part number 5KM-8472C-10-00, 5KM-84710-01-00.. SUPER BRIGHTDifferent from single halogen bulb, 22pcs LED are embedded on a special chrome panel that reflects and enhances the light. High intensity and outshines traditional incandescent lamps. When you hit the brakes, you'll grab everyone's attention.. HIGH QUALITYThis Grizzly Tail Light made of premium ABS and PC materials, which are anti-scratch, IP67 waterproof and more durable. Unique grid-patterned lens makes light stylish, add custom appearance.. EASY INSTALLATIONUsing the harness connector, plug the 3 wires into the connector and into your ATV. Black--Negative Blue--Tail light Yellow--Brake light. Before plug into connector, ensure that the function corresponding to each wire is the same as the stock one.. PACKAGE INCLUDE1 PCS ATV Motorcycle Brake Taillights for Yamaha. Sold each.

Better Security This tail light will take your safety to the next level.This tail light has a built-in strobe function that lets you be seen from 3x farther away. When you activate the brakes, the light strobes in intervals of 3 for maximum noticeability and turn solid red.Makes you more noticeable when driving to increase safety.. High QualityDOT SAE approved, sharp cut-off light and higher light output ensures no stabbing of others' eyes while providing the brightest and widest field of vision, durable shield that can withstand any extreme use conditions such as desert, stained weather or rain and fog.Dissipation to protect the taillight housing in different weather conditions.. IP67 Waterproof RateHighly sealed connector of IP67 waterproof rate and the Polycarbonate Lens, efficiently anti-corrosion and anti-crash, protecting the fog lights from different weather conditions.. CompatibilityFit for motorcycles with the same shape taillight base as ours. compatible with harley 99-20 XL, 99-17 FXDL, 18-20 FXLR, FLHC and FLHCS, 03-17 FXST, FXSTB, FXSTC and FXSTS, 00-17 FLST, FLSTC, FLSTF, FLSTFB, FLSTFBS and FLSTSB, 09-20 FLHRC, FLHTC, FLHTCU, FLHTK and FLTRU and 99-08 Touring models except FLHX, 2005 FLHTCSE, 2007-2008 FLHRSE and models equipped with Licenses Plate Relocation Kit PN 53702-04. Does not fit models with Bobtail fenders.. Easy Installation3-wire configuration, come with adapter, just insert the pigtail into corresponding hole. please make sure every wire in proper placement, red wire for brake light, blue wire for running light and black wire for negative..

32SMD high brightness 2835 LED chips per lights for maximum illumination. Working Voltage 12V.. Supports four functions Running Tail Light, Bake Light, Left Turn Signal and Right Turn Signal Lights.. All-in-one design. Perfect for Motorcycle Scooter Quad Cruiser Off Road etc. Easy Installation Mount with 3M tape, 5 wires connection.. Made with a durable flexible FPC plastic rust-resistant strip and filled with IP65 watertight silicone ensure it could work well in any weather.. Livtee LED are strictly tested for sale Any issues or questions please feel free to contact us, we are always here to satisfy all of you..

Transit FitmentCompatible with Ford Transit 150, 250, 350, and 350HD CargoPassenger Vans 2015-2025. Designed specifically for the Left Driver Side of the vehicle.. CRITICAL Single Rear Wheel OnlyIMPORTANT FITMENT NOTE This assembly is compatible ONLY with models equipped with Single Rear Wheels SRW. It is NOT Compatible with Dual Rear Wheel DRWDually models. Please visually verify your rear tires before purchasing.. OEM ReplacementA direct replacement compatible with part numbers CK4Z13405G, CK4Z-13405-G, 166-02779L, and FO2800242C. Engineered to match the factory dimensions and mounting points perfectly.. Complete SolutionComes pre-assembled with New Bulbs and a Wire Harness included. This is a complete plug-and-play solution, allowing you to replace your damaged light in under 10 minutes without splicing wires.. Superior ConstructionConstructed from heavy-duty ABS plastic housing and an impact-resistant polycarbonate lens. Designed to withstand the rigors of daily commercial use, resisting cracking from road debris and fading from UV exposure.. Weatherproof ReliabilityFeatures a fully sealed structure to prevent moisture intrusion, condensation, and dust buildup, ensuring your brake and turn signals remain bright and visible in all weather conditions.. 2-Year GuaranteeKeep your work van on the road with confidence. This Radvik Tail Light Assembly is backed by our dedicated technical support team and an unbeatable Radvik 24-Month Durability Guaranty.

Better SafetyThis tail light will take your safety to the next level. 60 LED lamp beads, smoked black lamp shell, bright and eye-catching and will not hurt the eyes of people behind. It has a service life of 50,000 hours. Combined with the left and right steering function, the yellow highlight light flashes to remind vehicles behind to improve safety.. High QualitySharp cut-off light and higher light output ensure that it will not hurt others' eyes while providing the brightest and widest field of view, and the durable protective cover can withstand any extreme usage conditions, such as deserts, dirty Weatherproof or rainproof or fogproof. Thermal protection of tail light housing in different weather conditions.. IP67 Waterproof RateHighly sealed connector of IP67 waterproof rate and the Polycarbonate Lens, efficiently anti-corrosion and anti-crash, protecting the fog lights from different weather conditions.. CompatibilityFits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE All 2002-2010 FXST Models except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCWC1991-2010 Electra Glides It can not be installed on models with exclusive tail light such as 2005 FLHTCSE,XL 1200XXL883NDyna wide glide2007 Harley Davidson Sportster XL1200L. 2009 FLHT Standard. Easy to Install3 plugs, just insert the pigtail into the corresponding hole. Please make sure that each wire is in the correct position, the yellow wire is for right turn, the blue wire is for left turn, and the set of multiple wires is the brake lightlicense plate light and driving light..

Fitment The Brake Light Taillight is fit for Yamaha BANSHEE 350 Warrior BLASTER 200 YFS200 GRIZZLY 125 660 ATV UTV. It will include the light bracket.For more details about the fitment you can see the link on the back.. PERFECT MATCH Our brake lights for yamaha blaster parts can perfectly match your car and are specially designed. It is a satisfying replacement.Please check before purchasing.. Easy to install Simple installation process, only need a few minutes, no need to go to the auto repair shop for maintenance. It will work normally after installing the screws and wires.. DURABLE WATERPROOF Made of high quality steel bracket and ABS plastic taillight, long service life and waterproof, you don't need to worry about the brake lights being damaged by rain.. After-sales Service You can contact us with any problems after purchase, we will provide you with high quality after-sales service..

High QualityThis Led tail light is made of high quality ABS PC lens. Waterproofrobustness and durability, and long service life,. Better PerformanceThis product is with the waterproof electronic board, equipped with a stabilization circuit, can suppress sudden overvoltages. 12 to 15 volt operating range.. Low Power ConsumptionLow energy consumption, but high output lumens, while not reducing engine power.. 3 in 1 Fucation DesignThe rear fender tail light can function as running light, brake light, and turn signal light.. About CompatibilityUniversal fits for Most of motorcycle models, Dirt Bike, or any Custom Bikes. It is not specific designed for any motorcycle. Some minor modifications may be needed during installation..

Enhanced visibility The Motorcycle LED Rear Fender light provides enhanced visibility, ensuring that other drivers can clearly see your motorcycle from a distance. With its bright 12V LED Tail Light Brake Lamp, you can ride with confidence knowing that you are easily visible on the road.. Multi-functionality This LED rear fender light is not just a simple tail light. It also features two turn signal lights, allowing you to indicate your intentions to other drivers when making turns or changing lanes. This multi-functionality adds an extra layer of safety to your motorcycle.. Easy installation Installing this Motorcycle LED Rear Fender light is a breeze. Simply follow the included instructions and connect it to your motorcycle's electrical system. No complicated wiring or modifications are required, making it a hassle-free upgrade for any motorcycle owner.. Durable and weather-resistant Built to withstand the elements, this LED rear fender light is designed to be durable and weather-resistant. Whether you ride in rain or shine, you can trust that this light will continue to perform optimally, enhancing your visibility and safety on the road.. Universal compatibility Designed to fit most motorcycles, this LED rear fender light is a versatile accessory that can be easily installed on various models and brands. Whether you have a cruiser, sportbike, or touring motorcycle, this light is compatible and will seamlessly integrate with your bike's aesthetics..

CompatibilityThe LED taillights fit motorcycles with the same shape of taillight base as ours. Especially perfect compatible with 99-20 XL, 99-17 FXDL, 18-20 FXLR, FLHC and FLHCS, 03-17 FXST, FXSTB, FXSTC and FXSTS, 00-17 FLST, FLSTC, FLSTF, FLSTFB, FLSTFBS and FLSTSB, 09-20 FLHRC, FLHTC, FLHTCU, FLHTK and FLTRU and 99-08 Touring models except FLHX, '05 FLHTCSE, '07-'08 FLHRSE and models equipped with Licenses Plate Relocation Kit PN 53702-04. Does not fit models with Bobtail fenders.. ALL-IN-ONE FunctionIt can be used as tail lights, brake light and license plate light. Built in 4Pcs led chips lit up good for license plate light. Low profile design, curved high with rear fenders for a streamline looking, make your motorcycle more distinctive.. 2X Brighter Than Factory LightGetting tired of dim or old light. Its time to get the taillights. Built in high power led chips, 2x brighter than factory light, maximize your rear end visibility, greatly improve your driving safety at night or rainy days. Easy to install, no modification needed, just connect black wire from tail light to ground on your stock light, connect red wire to your brake light, and connect blue wire to your tail light.. High Quality Tail Light KitMade of high quality ABS plastic material, processed with ultrasonic treatment housing, protect led chips from water or dirt damage without weakening light water sealed, a foam included in package makes our taillight closely to your motorcycle, avoid water or moisture inside after driving in heavy rainy days or car wash. And led chips lower power consumption, 99 reduce burning bulbs, prolong life service time and save few bucks on changing light.. Buy with ConfidenceYou are backed by 6-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..

Package Including 1 Dual Color Motorcycle Scooter LED Lamp,ONLY Need 1 Pcs lamp with 3 functions maximum visibility and safety. 3 In 1 - Driving lights Left and Right Turn signal Brake Stop light . Waterproof In Rainy Weather,Totally Glue Seal Design IP67 Waterproof Level Made It Steady Woking Performance In Rainy Days.. Connection Guide Black wire--Negative, Yellow wire--Turn signal Sequential,Green wire--Turn signal Sequential, White wire-- Position light,Red wire --Brake light Size For The Lamp - Length 125mm Width35mm Height21mm Screw Diameter M4.5 Hole Spacing69mm Wire length Around 50cm. Driving lights When the taillights are activated, the red breathing mode is scanned four times before switching to a constant lights Low Beam Red Light Brake light When braking, it flickers four times and switches to a constant red light High Beam Red Light Turn signal Left Right sequential flowing turn signal led lights LeftRight Flowing Amber light.. DC12-80V Working Voltage,Widely Use On Motorcycle,Scooter,Electric Motobike,Moped..

Fitment Left and right rear tail light replacement for Polaris Ranger 900 XP 1000 2013-2020. Replacement for Part Number 2412774 2411866. Installation Position Rear of the vehicle. Feature Direct replacement for a proper and easy installation. Note Please check carefully if this part is compatible with your vehicle before placing your order.

Compatible with Polaris RZR XP 1000 Turbo 2019 2020 2021 2022 2023 SPORTSMAN 1000 XP 2017 2018 2019 2020 2021 2022 2023 RZR RS1 2018 2019 2020 2021 2022 2023 Please refer to compatible list in description. Customize the look of your vehicle to make it stand out. Made of high quality ABS with good seal Durable off-road-ready construction, both dust and water-resistant. Long service time, high quality LED beads are used Working in all weather conditions. Easy to install, plug play 1-year warranty is provided Package include 1pcs center LED tail light.

Taillight lens Compatible with Polaris Ranger 400 2011-2013, Ranger 500 2011-2013, Ranger 570 2014-2019, Ranger 800 2013-2014 EFI MIDSIZE Note Not Full Size, Please refer to the compatible list in description. Replace part number 2411450, plug and play. Tail light lens for driver and passenger side. Function can be used as running lights or brake lights. Package included1PCS Tail light lens.

Operating Voltage 12V DC. Waterproof rate IP 67. Position Taillight. Life Time 50000 hours.

15 LED BeadsThis 12v rear brake light is composed of 15 LED beads, with high brightness, long service life up to 50000 hours, which is durable and has strong signal.. Safe DrivingAlways bright on running and high bright on stop brake to ensure your driving safety. With low power consumption and energy saving, ideal for your vehicle.. Ultrasonic WeldingUsing ABS material and professional ultrasonic welding technology, it is shockproof, rust-proof and waterproof, no fear of rain, snow and fog.. ApplicationSizeL H W Approx. 116 33 35mm4.6 1.3 1.4. Suitable for most motorcycles, ATVs and scooters. Wonderful light accompanies you along the way.. Easy To InstallNo need to change lines, you can directly replace the old or worn one, this brake taillight is light and strong, simple and convenient to install..

Widely Application - This tail light fit for 2007-2010 Sportster XL883L LowEFI, 2000-2006 Sportster XL883C Custom, 2005-2006 Sportster XL883L Low, 2011-2015 Sportster XL883L Super low, 2000-2006 Sportster XL883C Custom, 1998-2008 Road Glides, 1991-1996 Tour Glides, 1999-2006 FLTR-I etc. More for detailed applicable models, please refer to the vehicle fitment list or products description. HIGH QUALITY COMPONENTS - MZS tail light use high quality ABS injection molded housing and UV protected lens element, will have waterproof, dustproof, long-lasting and high toughness.. UPGRADE DESIGN - The integrated LED Tail Light with Turn Signals brighter than stock tail light with smoked lens. Lay Down Style, low profile design tail light, which is angled to follow the curve of your stock fender for the customized look. Sealed better with gasket prevent water to infiltrate, made lifespan more longer.. INTEGRATED FUNCTIONALITY - This tail light can be used as running light, brake light, turn signal lightturn leftright, Dual mode redyellow LEDs, is used to illuminate the license plate, as well as as a light sign behind, warning the car behind, the brake in order to maintain a certain distance. Providing good visibility, it makes your driving much safer.. INSTALLATION NOTE - Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. Black Wire Negative, White Wire Driving Light, Red Wire - Brake Light, Yellow Wire Right Turning, Blue Wire Left Turning. If you install have any problem, please contact us, we will help you..

CompatibilityFor 99-later XL except XL883N, XL1200CX, XL1200N, Xl1200NS, XL1200V, XL1200X, XL1200XS and 11-later XL1200C, 99-17 FXDL, 18-later FXLR, FLHC and FLHCS, 03-17 FXST, FXSTB, FXSTC and FXSTS, 00-'17 FLST, FLSTC, FLSTF, FLSTFB, FLSTFBS and FLSTSB, 09-later FLHRC, FLHTC, FLHTCU, FLHTK and FLTRU and 99-08 Touring models except FLHX, 05 FLHTCSE,07-08 FLHRSE and models equipped with Licenses Plate Relocation Kit PN 53702-04. Does not fit models with Bobtail fenders.. ALL-IN-ONE FunctionsThe layback taillight integrated tail light, brake light and license plate light. Laydown profile design, shaped to mirror the contour of the rear fender, greatly improved your motorcycle looking.. 2X Brighter Than Factory LightEquipped with high power led chips, 2x brighter than factory light, maximize your rear end visibility, greatly improve your driving safety at night or rainy days.. Easy to installEasy to install, no modification needed, just connect black wire from tail light to ground on your stock light, connect red wire to your brake light, and connect blue wire to your tail light, and then push everything back to its original place.. What You Will GetIncluding 1x tail light kit. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..

Wide Compatibility This LED TailLights are compatible with Can-Am Commander 800 1000 2011-2015 Commander Max 800R 1000 2016-2017 Outlander 500 650 800R 1000 1000R 2016-2017 Outlander Max 500 650 2016-2017 Maverick 1000 2013 Maverick 1000R Max 1000R 2013-2017 Please refer to the description for detailed models. High Reliability the internal protection mechanism design make it no flickering or failure, IP67 waterproof and scratch resistant materials prevent from dust, mud, snow or heavy rain leaking in. Full LED Design Our brake lights are made of ABS plastic and full LED beads, long service time, more than 30K working hours. Brighter and concentrated light source,working in all weather conditions. Easy Installation Plug Play, you can direct replace the original taillights without changing any screws with our taillights, working in all weather conditions. Good Service We offer a one-year warranty and lifetime customer services. If you have any questions about this product, please contact us, we will reply within 24 hours and try our best to solve your problems to your satisfaction.

Compatible with Polaris Ranger 570 900 1000 Ranger SP 570 Brutus HD Polaris General 1000 Please refer to compatible list in descriptioon. Work as running light and brake stop light, fit for both the driver and passenger side. High reliability, the internal protection mechanism design make it no flickering or failure, IP67 waterproof protection. Long service time, the high quality LED beads are used, more than 30K working hours, Working in all weather conditions. Quick easy installation, Plug Play Package include 2PCS Smoked Black Tail Lights.

PERFECT FIT - Motorcycle tail light suitable for YZF R3 R25 FZ07 MT07 MT03 MT25 models. More for detailed applicable models, please refer to the vehicle fitment list or products description.. HIGH QUALITY COMPONENTS - MZS brake light use high quality ABS injection molded housing and UV protected lens element.. ADVANTAGE - The integrated LED Tail Light with Turn Signals have waterproof, dustproof, long-lasting and high toughness.. INTEGRATED FUNCTIONALITY - This tail light can be used as running light, brake light, turn signal lightturn leftright, Dual mode redyellow LEDs, is used to illuminate the license plate, as well as as a light sign behind, warning the car behind, the brake in order to maintain a certain distance. Providing good visibility, it makes your driving much safer.. INSTALLATION - Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. So before install, please check the last installation instructions picture on products page. If the light work abnormaly,you need to add a resistance..

CompatibilityThe led taillights fit all motorcycles with the same shape of our taillights base. Featured compatible with Herley 883 sportster, sportster,Electra Glide, Road King, Touring, Road Glide Customer. For more suitable models please refer to amazon confirmed fit.. ALL-IN-ONE FunctionsLay down design, it can be used as taillights, brake lights, license plate light and turn signals. High intensity red light for brake light, red light for tail light, amber light for turn signals.. Easy InstallationPlug and play, easy to install. Black wire -- Negative White Wire - running light Red Wire - brake light Yellow Wire - turn right Blue Wire - turn left.. 3X Brighter Than Stock LightBuilt in high power led chips for illumination, maximize lighting output and improve your rear end visibility to other vehicles, make your driving much safer.. What You Will GetIncluding 1x Smoked Led tail light with turn signals. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..

FitmentFit for Honda ATV TRX125 1987-1988 TRX250R 1987-1989 TRX250X 1987-1992 TRX300EX 1993-2004 TRX400EX 1999-2004. FeatureO.E.M Specification, perfect fit and work as well as factory.. O.E.M33710-HB9-771 33710-HC0-003 33720-HC0-003 33710-HN1-A00 33710-HB9-671. PackageTaillight Lens x 1 Socket Kit x 1. ServiceJAVIK offer 24 hours customer service and 1 year warran_ty. Please message if you meet any problem..

CompatibilityDesigned to fit Honda CBR600RR 2003 2004 2005 2006 Honda CBR1000RR 2004 2005 2006 2007. It can be used as tail light, brake light and turn signals. Popular smoked lens cover add new features to your motorcycle, enhance appearance of your motorcycle.. 2X Brighter Than Halogen BulbsGetting tired of dim or old tail light and worrying of safety while riding at night. Its time to get this tail light. Built in high power led bulbs for output, 2X brighter than factory light, maximize your rear end visibility, greatly increased your safety while riding in rainy days or at night day time. Smooth and transparent surface, which maintain clear visibility without weakening the LED light. An ideal replacement for a old or defective bulbs.. 15 Times Longer Lifespan Than Factory LightUp to 30000 hours lifetime, 15 times longer lifespan than factory tag light Built in led chips, emitting a mere 10 of their energy in heat, making them much more energy efficient and cool to the touch, saving money on the amount of replacements that need to be purchased and saving costs on power consumption.. Easy Installation AS 1, 2, 3Easy to install, no modifications needed or required. Hardness connector is attached to the end of wire for easier install. Black wire-- Negative White wire-- Tail Light Red Wire-- Brake Light Yellow wire-- Right turn signal light Blue wire-- Left turn signal light.. Buy with ConfidenceYou will get 1X tail light. You are backed by 6-Month warranty since order purchase date. Please feel free to contact us BEFORE OR AFTER SALE if you have any questions. Solutions will be offered once detail is confirmed..

Wide Compatibility Our tail light fits a wide range of Harley models, including Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings,etc. For more models, please refer to description and amazonconfirmedfit.. ALL-IN-ONE Our taillights can be used as running lights, brake lights and turn signals leftright turn. White light can also be used as license plate lights, built in high power SMD chips, improve your rear visibility, make your driving safer.. Durability and Stylish Look Smooth, good light transmission, our taillights made with high strength LED chips and unique smoke lens, waterproof, dust proof, durable and high toughness, this taillight gives your motorcycle a smooth appearance. Low profile design, the layout style is angled to follow the curvy streamlined look of your rear fender.. Easy installation Our taillights come with an upgraded turn signal plug for easy installation. Easy wirin Running--White Wire, Brake--Red Wire and Turn Signal Yellow wire-- right turning Blue wire-- left turning Black wire--Negative.. Packing list 3-Month Warranty, come with 1 piece smoked LED taillight 1 piece washerthe washer to prevent water penetration.All LED taillights are tested before shipping, and all smoke lens caps are carefully inspected before shipping, but may be damaged during shipping. If you have any questions, please contact the seller and we will do our best to deal with it for you as soon as possible. Please check the description for compatibility before ordering..

Compatible for Polaris RZR XP 1000 Ultimate Sport Premium 2024-2025, Polaris RZR XP 4 1000 Ultimate Sport Premium 2024-2025Please refer to the compatible list in the listing, Replace OEM 2415182, 2415183. Our rear lamp assembly is made of high quality ABS with good seal, both dust and water-resistant Strictly follow the quality and safety standards, our red LED taillights can work in all the weather conditions Long service time, more than 30K working hours, provides a brighter and wider light source to increase your driving safety and visibility even on rainy nights. Full LED design, high quality LED beads are used, low power consumption, long service time and life span, more than 30K working hours. High reliability, the internal protection mechanism design make it no flickering or failure, perfectly matching the appearance of your vehicle. Easy to install, Plug Play perfect and accurate replacement of original taillights without changing any screws. Package include 2PCS red tail light assembly. If there is any problem during your installation, please contact us on Amazon.

Come with a 5-year free warranty and reliable after-sales service.. All-in-One LED Tail Light Assembly - Integrated rear running light, brake stop light, turn signals leftright and license plate illumination for a complete rear lighting upgrade.. High-Visibility Safety Performance - Super bright LEDs with long lifespan for improved daytime and night visibility enhances rider safety by making your vehicle more noticeable to trailing traffic.. Plug Play Installation - Hassle-free installation - designed to match like for Harley OE wiring harness for direct plug-in no splicing, no cutting, minimal installation time.. Durable Weatherproof Construction IP68 waterproof housing and rugged ABS PC lens withstand vibration, rain, and rough riding conditions.. Fitment - Fits for Harley models including Sportster 883, 1200, Dyna, Road King, Electra Glide, Road Glides, Tour Glides, Touring cruisers Do not fit for 91-20 FLSTF, 05-10 FLSTN, 97-03 FLSTS, 05-07 FLSTSC, 2010 FLSTSE, 02-07 FXSTD, 07-09 FXSTSSE, 08-10 FXCWC, 2005 FLHTCSE, 2009 FLHT Standard. Any issue with led tail light for Harley just feel free to reach out to AUDEXEN via Amazon message center. Log in your amazon account Choose Your orders Find the order ID Click Contact seller.

Fitment Compatible with Honda CBR600RR 2003 2004 2005 2006, Honda CBR1000RR 2004-2007. Super Bright and 3 in 1 Design built in high power SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety, function as running light, brake light and turn signal light. Waterproof Made of high quality ABS plastic, well-sealed on the edge, water tight, effectively keep water out of housing, stay illuminated in rainy days. Best replacement for old dull taillight. Easy Installation plug and play, 5-wire configuration, red wire for brake light, white wire for running light, blue wire for left turn signals, yellow wire for right turn signals, and black wire for negative. Package Including 1 Pc smoked led brake tail light integrated turn signals..

High Brightness This LED rear tail brake light uses high-quality LED bulbs, providing concentrated light without flickering. It maintains clear visibility at night and stable light output in extreme weather conditions such as rain, snow, and fog.. Functionality This LED rear tail brake light features different brightness levels based on driving conditionshigh-brightness red light when braking and medium-brightness red light while drivingproviding efficient warning functionality to clearly communicate your driving status to vehicles behind.. High Quality Constructed from high-quality ABS plastic and utilizing advanced ultrasonic welding technology, this LED rear tail brake light boasts a shock-resistant and waterproof housing to prevent moisture ingress and bulb short-circuiting. It is resistant to aging and wear.. Installation This LED rear tail brake light can directly replace old or worn-out tail lights. Simply remove the old one, connect the wires correctly, and tighten the screws with a screwdriver. No need to replace the wiring or use complex toolsthe upgrade is easy to complete.. Package You will get 1 x LED rear tail brake light, featuring a compact and efficient design, lightweight and durable, tested multiple times, plug-and-play, an essential accessory for enhancing driving safety in adverse weather conditions..

CompatibilityThe bullet rear led turn signal light bar fit all motorcycles with original equipment rear bullet stopturntail light bar. Featured compatible with 2017-later FLHRXS and 2014-later FLHT, FLHX, FLHXS, FLTRX, FLTRXS models, 2010-later Street Glide, and 2010-later Road Glide,etc. For more suitable models please refer to amazon confirmed fit. ALL-IN-ONEALL-IN-ONE design, function as brake light, tail light, turn signals and license plate lights. High intensity red light for brake light, red light for running light, amber light for turn signals, white down-lighting for the license plate. Super Brightness and Durable Made of high quality metal material,no corrosion, anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather, processed with black anodized finish, anti-oxidation, anti-corrosion, prolong the life service time Built in high power LED chips, 3x brighter lighting output illuminate than halogen bulbs, greatly improved your visibility, make driving safer. Easy to InstallEasy to install, just remove the stock rear turn signal light bar, then install new replacement Easy wiring, 4-line cable harness red wire for brake light, white wire for running light, yellow wire for turn signals, black wire for ground 2-line cable harness black wire for ground, red wire for license plate light. What You Will Get1set rear turn signal light bar kits. You are backed by 3- Month since from order purchasing, please contact us if you have any questions. Solutions will be offered once detail is confirmed.

High-brightness LED light setAdopt high-quality LED lamp beads, the brightness is increased by 30, ensuring driving safety at night and in bad weather. The three-in-one design of brake light, turn signal and tail light is simple and beautiful, while improving vehicle recognition113.. Perfect fit for KAWASAKI Z250 Z300 NINJA 250300 2013-2018,Designed for KAWASAKI Z250 Z300 NINJA 250300 2013-2018 , it is easy to install, no modification is required, directly replaces the original tail light, and perfectly fits the body curve.. Durable and waterproof designAdopting IP67 waterproof rating, dustproof and waterproof, adapting to various weather conditions, ensuring long-term stable use, suitable for urban commuting and long-distance riding.. Improve vehicle appearance and safetyStreamlined design, full of modern sense, enhances the overall appearance of the vehicle. High-response LED light group makes brake and turn signals more eye-catching, effectively reducing the risk of rear-end collision.. Plug and play, easy installationComes with detailed installation instructions, no professional tools are required, and installation can be completed within 15 minutes. Compatible with the original vehicle line, no additional wiring or modification is required..

Compatible with Kawasaki Mule 500 520 550 600 610 2010 2020 2030 2500 2510 2520 3000 3010 3020 4000 4010 SX 1990-2020Please refer to compatible list in description Replace 23026-1019. It can replace your broken, cracked or aged tail light lens and provide new protection for your tail light. The lens is made of high light-transmission plastic, smooth and transparent surface, anti-scratch and waterproof Working in all weather conditions. No faded of long-time exposure, protect the bulbs from water or dirt damage without weakening light, prolong the life service time. Quick Easy installation Package include 1PC Red Taillight Housing NOTE THE LENS DOTN'T COME WITH BULB.

Reliable replacement - this tail light assembly is designed to look and function like the original part on specific vehicles. Century of experience - for over 100 years, Dorman Products has provided quality automotive replacement parts to its customers. Durable materials - rigid plastic protects against weather and road conditions. Easy installation - built to match the exact original dimensions for proper fit. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Color 23 LED red as running brake light, 5 white LED as license plate light. Lens Color Smoke, Wire GreenGround, YellowRunning, BrownBrake. Aprox.Dimensioins 5 x 1-12 x 1-14 12.5cm X 3.7cm X 3cm. Package Included1 x 28 LED Universal Tail Light. FitmentFit for all kinds of cruiser bikes..

Lifetime LED Warranty. DOT SAE Compliant. Plug and Play. 45 Red LEDs. Replaces OEM 68245-03 or 67800205.

Worth UpgradingWith 60pcs high intensity LED chips, bright enough and over 50000 hours lifespan, increased rear visibility which is easier to notice by other vehicles on the road for safe driving. Multiple Functions All in OneThis taillights can be used as running light, brake light, and turn signal lightturn leftright, also come with extra license plate light. All modes and functions are built together which are more practical than the original taillights. Plug and PlayEasy to install within a few minutes, plug and play design, compared to others, we also upgrade the turn signal wire to a plug style, just plug 3 plugs to the corresponding position on the rear of your motorcycle to complete the installation, no need for any Hardwired. CompatibilityFits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE All 2002-2010 FXST Models except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCWC1991-2010 Electra Glides except 2005 FLHTCSE, 2009 FLHT Standard. Package Included1 PCS smoked housing LED tail light, 1 PCS Gasket.

Compatible with Polaris Ranger XP 1000 Crew 2018-2021 perfectly Please refer to the compatible list in description. Direct replacement of the original taillights without changing any screws. High reliability, the internal protection mechanism design make it no flickering or failure, IP67 waterproof protection. Long service time, the high quality LED beads are used, more than 30K working hours Working in all weather conditions. Easy to install, Plug Play 2pcs smoked black taillight included.

FITMENTThe Tail Light with Turn Signals compatible with MSX125SF,GROM125,CB650F CBR650FCTX700NYG125.. ALL IN ONEThe Motorcycle Integrated LED Tail Light has brake light, turn signals and DRL running light. Flowing turn signals and brighter brake light command the attention of following vehicles and greatly improving riding safety.. IP67 WATERPROOF The Tail Light Brake with Blinkers is made of high quality materials, IP67 waterproof and LED enable the light to work under any harsh environment.. LAMBORGHINI STYLISHFeaturing an array of fast acting high-intensity LED lamps arranged in Lamborghini-style shape, adding a stylish touch, even when the bike is parked.. EASY INSTALLMotorcycle Brake Light With Turn Signals features an easy plugin connection to the Original Equipment wiring harness. Black--Negative Red--Brake Light Blue--Running light 2 Yellow weirs for Turn Signals..

CompatibilityThe led taillights fit all motorcycles with the same shape of our taillights base. Featured compatible with Herley 883 sportster, sportster,Electra Glide, Road King, Touring, Road Glide Customer. ALL-IN-ONE FunctionsLay down design, it can be used as taillights, brake lights, license plate light and turn signals Basic aftermarket replacement for the standard new red led tail lamps, same color and size as stock, a good choice if you prefer the classic style lens to a customized one. Durable and WaterproofMade of high quality ABS plastic material, anti-scratch, water proof, no faded after long time exposure Well-sealed at the edge of the taillights, waterproof, even keep light on in heavy rainy days or after motorcycle washing. Easy InstallationPlug and play, designed with adapter plug at the end of wire, easy to install. Black wire -- Negative White Wire - running light Red Wire - brake light Yellow Wire - turn right Blue Wire - turn left. 3X Brighter Than Stock LightBuilt in high power SMD led chips for illumination, maximize lighting output and improve your rear end visibility to other vehicles, make your driving much safer. What You Will GetIncluding 1x red Led tail light with turn signals1x gasket5x metal terminals1x connector. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed.

LED tail light with turn signal for Harley Davidson.. Super bright wide angle provide maximum visibility safety. Brings you more safety, Visible By All Traffic. Curved design provides perfect match to the chopped rear fender.. 5 Wire Connection Red Brake Light Black-Ground White Blue-Turn signal lightYellow-Running Light.. Low consumption LED lights with 80,000 hour life expectancy.. Fitment For Harley Davidson 2004-2014 Sportster 883, Sportster 1200 2014 Iron 8832010-2014 Forty Eight 2013-2014 Seventy Two.

FITMENT Compatible with Can-Am Outlander Commander Maverick 2011-2022. Please refer to the compatible list in description, these LED tail lights ensure a seamless fit with no gaps. Upgrade your vehicle in minutes. ENHANCED SAFETY Equipped with high-performance LED beads, these tail lights offer 10x brighter illumination than traditional halogen bulbs. The high-luminosity LED chips produce a brighter, more concentrated, and instantly illuminating light beam, thereby significantly reducing the risk of rear-end collisions and improving your driving safety. DURABILITY Built with IP67 waterproof rating and high-strength ABS materials, these tail lights withstand harsh weather conditions, including rain, dust, and extreme temperatures. The design of the internal protection mechanism prevents it from flickering or malfunctioning. ensuring long-lasting performance. EASY PLUG PLAY INSTALLATION Direct replacement for your original halogen lights, no drilling or wiring modifications required. And the energy-efficient LED technology reduces power consumption and extends the lifespan of the lights. PACKAGE INCLUDES 2pcs black taillights. Please refer to the installation video before your installation.

Compatibility Compatible with Harley 2004-2013 XL883N, XL1200N, XL1200X, XL1200V and models equipped with chopped rear fender kit PN 60236-09, 60236-10 2014-later XL883N, XL1200V, XL1200X, XL1200XS, XL1200NS and models equipped with chopped rear fender kit PN 60236-XX and side-mount license plate. NOTE Will not fit models with center-mount license plates. Integrated Brake Turn Signal Lights Super bright with 3 in 1 design, the chopped rear fender edge light can function as tail light, brake light and turn signal light.. Upgrade LED Illumination Built in high power SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety.. Easy Installation Just splice wire into existing wire harness. 5-wire configuration, black - negative, blue - running light taillight, yellow - turn signal right, green - turn signal left, red - brake light.. Package Including 1 PC smoked led fender edge brake tail light integrated turn signals..

Light Reflector, Dual Functionality Stay visible in any condition. Our bike lights combine ultra-bright illumination with innovative wide-angle prismatic reflectors built into both front and rear lights. Even when turned off, the reflector panels provide powerful warnings to cars and pedestrians, maximizing your safety day and night.. 14 Lighting Modes, Switch Freely The bike headlight has 8 modes including spotlightfloodlightstrobe light and the tail light has 6 modes including constant onstrobeslow flash . With simple one-click, double-click, or long press, you can instantly switch between brightness levels and flash patternsIt will remember the previous settings when restarted. Perfect for most city streets, mountain trails, or foggy nights.Please refer to the user manual for detailed use.. Dual Type-C Charging Long Battery Life Charge both bike lights front and back at the same time with the included dual Type-C cableno more waiting. The bicycle headlight charges fully in just 2 hours, and the tail light in only 1 hour. Enjoy 3-16 hours of illumination from the headlight and 5-26 hours from the tail light on a single charge. A smart low battery indicator flashes green below 20, so youre always prepared for your next adventure.. Super Portable Ultra Durable Engineered for performance and portability, each bike light is ultra-slim and feather-light the bike front light weighs 27g, rear light 24g, making them easy to carry. With IP65 waterproofing and 3-meter drop resistance, these bike lights built to handle rain, mud, and rough ridesperfect for all your outdoor adventures.. Tool-Free Install Versatile Use Quickly attach and detach your bicycle light without tools, thanks to the flexible silicone straps that fit most handlebar or seat post. These bicycle lights solutions arent just for bikestheyre ideal for backpacks, strollers, or scooters, and perfect for hiking, camping, or evening dog walks.. Battery Retention The battery retention lasts up to 7 months, but for optimal performance, we recommend recharging them if unused for over 3 months..

Direct Replacement Tail Light Compatible with 2006-2011 Cadillac DTS. Evan-Fischer EVA15672037133 Features Halogen, Clear Red Lens, With bulbs. Replaces OE Number 15858151 and Replaces Partslink Number GM2818181. A high quality, Direct Fit OE Replacement Tail Light, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.

Super bright LED tail light with built in turn signals. Easy plug and play installation with included sub-harness. Stop Alert - utilizes 3 quick red flashes when brakes are applied initially. Sequential alternating yellow LED turn signals red turns off on that side when signals are activated. High quality injection molded housing and UV protected lens element.

CompatibilityThe taillights compatible with Harley Sportster, Street Bob, Dyna, Road King, Softail, Electra Glide, 1999-2019 XL except XL883N, XL1200CX, XL1200N, XL1200X and 11-19 XL1200C, 99-17 FXDL, 18-19 FXLR, FLHC and FLHCS, 03-later FXST, FXSTB, 00-17 FLST, FLSTC, FLSTF. 09-19 FLHRC, FLHTC, FLHTCU, FLHTK and FLTRU and 99-08 Touring models except FLHX, 05 FLHTCSE, 07-08 FLHRSE and models equipped with Licenses Plate Relocation Kit PN 53702-04. Does not fit models with Bobtail fenders.. DOT CompliantLegal for use on all roads and highways in the US, and DOT is printed on the tail light cover, can be used with confidence. This brake tail light adopts lay down style and eagle claw design, not only upgrade the appearance of your motorcycle, the red eagle claw also makes it easier for you to attract attention and ensure your safety while driving.. All in One FunctionThe LED taillight design with brake light turn signals DRL running light license plate lights. When turning on the brake light, flash 3 times and then stabilizes, which has a quite obvious warning effect, increase visibility, stands out on the road.. Easy InstallationBlack - Negative Red - Running light License plate light Purple - Brake light Yellow - Right turn signals Blue - Left turn signals. No modification required. Soft rubber is attached to the outer edge of the taillight, water sealed, moisture-proof, waterproof, making the brake light perfectly attached to your motorcycle.. Brighter and DurableHigh quality ABS waterproof plastic material, anti-scratch. Built in 26pcs LED chips, lower power consumption, prolong the lifespan of taillight Up to 30000 hours lifespan. 6000k for running light, brighter than stock one. Maximize your visibility. And you are backed by 6-Month warranty since the order purchase date..

CompatibilityThe LED taillights compatible with 1999-later XL except XL883N, XL1200N, XL1200V, XL1200X and '11-later XL1200C, 1999-later Dyna except '09 FXDB and FXDWG, and '14-later FXDF, 2003-later FXST, FXSTS, FXSTB, and FXSTC, 2000-later FLST, FLSTF, FLSTSB and FLSTC, 1999-2008 Touring models except FLHX, FLHTCSE2, FLHRSE34 Models equipped with Licenses Plate Relocation Kit PN 53702-04. Also fits '09-'13 FLHRC, and '09-later FLHTC, FLHTCU, FLHTK and FLTRU models.. ALL-IN-ONE FunctionIt can be used as tail lights, brake lights and license plate lights. Built in 6 Pcs led chips lit up good for license plate light. 39 Pcs LEDs are used for taillights, low profile design, curved high with rear fenders for a streamlined looking, make your motorcycle more distinctive.. 2X Brighter Than Factory LightGetting tired of dim or old light. Its time to get the taillights. Built in high power led chips, 2x brighter than factory light, maximize your rear end visibility, greatly improve your driving safety at night or rainy days. Easy to install, no modification needed, just connect black wire from tail light to ground on your stock light, connect red wire to your brake light, and connect yellow wire to your license plate light.. High Quality Tail Light KitMade of high quality ABS plastic material, processed with ultrasonic treatment housing, protect led chips from water or dirt damage without weakening light water sealed, a foam included in package makes our taillight closely to your motorcycle, avoid water or moisture inside after driving in heavy rainy days or car wash. And led chips lower power consumption, 99 reduce burning bulbs, prolong life service time and save few bucks on changing light.. Buy with ConfidenceYou are backed by 6-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..

All of Our Items are 100 In Original Packaging You Will Never Receive a Used Item From Us. DOT and SAE Compliant. Made by an ISO Certified Manufacturer using Materials that meet or Exceed OEM Requirements. Installation Made Easy on All of Our Items Little to No Modifications needed at Best. 30 Days Refund 90 Days Defective Item Replacement Warranty Any Issues With Your Item Please CallEmail Us and We Will Help You. FITMENT 2015-2020 Chevy Tahoe LS LT LTZ models only. 2015-2020 Chevy Suburban LS LT LTZ models only will also fit 2017-2020 Tahoe Premier and 2017-2020 Suburban Premier..

Yamaha OEM Tail Light Lens Grizzly Big Bear Bruin Kodiak Wolverine Rhino Viking. Genuine OEM Replacement Taillight Lens. Includes Bulb and Wiring. Replace your Broken or Cracked Tail light Lens with this OEM Part. Part 5KM-84710-01-00.