Two installation methods This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you.. 150 degree adjustment The rod of wireless bridge bracket mount can be adjusted up and down by 150. After you install the CPE, adjust the angle of the rod to receive signals of different strengths.. Firmness This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.. Waterproof The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. Its very suitable for outdoor use.. Wide application This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..

5.8GHz 300Mbps High-Speed Transmission This wireless bridge utilize advanced 5.8GHz 300Mbps wireless technology and are equipped with a 12dBi high-gain antenna. With a maximum transmission range of up to 2 miles Barrier-free, they offer reliable and fast connectivity. The built-in 100Mbps LAN port ensures seamless wired network speed, making it ideal for point-to-point internet access sharing, remote IP camera surveillance, or remote network Wi-Fi access.. PTMP Pre-programmed for Easy Setup Simply connect both bridges to the PoE adapters using Ethernet cables, and the system will automatically power on. After waiting for 1 minute, the equipment will pair and establish a connection. The Link green LED indicator confirms successful pairing. This feature simplifies installation and eliminates the need for complex configurations, perfect for extending internet access to locations like garages, barns, stores, and warehouses using 5.8GHz wireless transmission instead of complicated wiring.. Long Range High Speed Operating in the 5.8GHz frequency with a fast 300Mbps wireless transmission rate, these wireless bridges can achieve a transmission distance of up to 2 miles Barrier-free and offer a reliable 100Mbps wired network speed. This makes them suitable for extending networks further, ideal for applications such as internet access sharing, video camera surveillance, or remote network Wi-Fi hotspots AP mode.. Point-to-Point Mode for Easy Pairing By connecting both wireless bridges to the PoE power adapter, they will automatically pair without requiring any configuration through a computer. In point-to-point mode, they are perfect for long-range video surveillance and internet network sharing. The master bridge outputs a Wi-Fi hotspot, allowing users to access it by entering the password. With a coverage range of up to 1.86 miles in a 60-degree angle in the front direction, it effectively extends Wi-Fi access coverage.. Includes Wireless Bridge Bracket Mount The point to point wireless bridge outdoor comes in a 2-pack bridges and bracket mount, providing a complete solution for extending your network. The 7-inch rotatable mounting bracket allows for easy installation on a wall or pole without the need for additional purchases, saving both time and cost. It is user-friendly and can be set up quickly without requiring professional assistance.. Compatible with Starlink Satellite Internet Kit This point-to-point wireless bridge extends Starlink router signals to another location using the 5.8G band requires Starlink Ethernet adapter for Gen V2. It simplifies sharing your Starlink internet access across multiple locations in remote areas. A fantastic Starlink mesh node device.. Solar Panel Power Supply and IP65 Waterproof Rating This ethernet wireless bridge supports solar panel power supply and features an IP65 waterproof rating, ensuring durability and longevity even in harsh weather conditions. It can be powered by plugging into a DC 5V socket with a minimum current requirement of 200MAH, making it convenient to use outdoors when there is no power supply.. 5.8Ghz WiFi Band and Long Range Transmission Distance The wireless bridge supports the 5.8G band, offering a clear channel without interference signals, leading to more stable network transmission. It also provides a long-range transmission distance of up to 3km, with a built-in 14DBi directional antenna to significantly improve the transmission and reception performance of wireless signals. This makes it suitable for various outdoor applications, such as extending network coverage to warehouses, garages, and other remote locations.. Wide Applications This wireless bridge outdoor is widely used for point-to-pointmulti-point connections, client bridge for elevator monitor networks, and connecting IP wireless cameras for extended coverage. It is suitable for venues requiring extended wireless network coverage, such as outdoor surveillance and remote locations.. Reliable Performance Built with high-quality materials and advanced technology, this bridge offers reliable and consistent performance, minimizing downtime and ensuring a seamless internet experience..

Transmission Distance Important Notes The maximum transmission distance of this wireless bridge is 3 kilometers. This is a theoretical value under ideal, unobstructed conditions. The actual distance will be affected by the environment obstacles such as trees, walls, and buildings will significantly reduce the effective distance and stability. For quality assurance in practical use, it is recommended to install the device within a line-of-sight range.. Operating Frequency and Advantages This WiFi bridge operates on a 5.8GHz frequency band. Compared with the common 2.4GHz band, this frequency band has less interference, providing a more stable and clean signal, which is suitable for point-to-point transmission.. 100Mbps1000Mbps LAN Ports This point to point wireless bridge is equipped with one 100Mbps LAN port and one 1000Mbps LAN port. It should be noted that the 100Mbps LAN port does not mean a 100Mbps speed will be achieved during use, nor does the 1000Mbps LAN port mean a 1000Mbps speed will be achieved. Wireless bridging cannot achieve the exact same speed as a direct network cable connection, and there will be a certain amount of bandwidth loss.. Antenna Performance This outdoor wifi bridge is fitted with a 16dBi high-gain antenna. This means the antenna has strong signal receiving and transmitting capabilities, and can better focus signals, thereby improving the efficiency and stability of point-to-point transmission.. IP65 Waterproof Rating An IP65 waterproof rating means the point to point wireless bridge can be installed outdoors and withstand rain and snow. However, it does not mean the device can be submerged in water or exposed to extremely harsh weather for a long time.. Compatibility with Starlink Router This wireless bridge outdoor can be connected to the LAN port of a Starlink router to extend the Starlink network signal to another location. It cannot receive satellite signals by itself, nor can it replace the Starlink antenna.. Typical Application Scenarios It is highly suitable for scenarios such as homes, villas, and small offices. It solves the network coverage problem in areas like courtyards, independent garages, warehouses, and neighboring houses..

- Equipped with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225-Outdoor easily delivers dual-band Wi-Fi speeds of up to 1200 Mbps to multiple devices at the same time.. The durable, weatherproof enclosure protects the access point against harsh outdoor conditions and provides stable wireless coverage up to 200m range at 2.4GHz and 300m at 5GHz in outdoor settings. Discreet appearance can also fit with any indoor scenarios.. ? Omada's Software Defined Networking SDN platform integrates network devices including access points, switches gateways with multiple control options offered - Omada Hardware controller, Omada Software Controller or Omada cloud-based controllerContact TP-Link for Cloud-Based Controller Plan Details. Standalone mode also applies.. Remote Cloud access and Omada app brings centralized cloud management of the whole network at different sitesall controlled from a single interface anywhere, anytime.. For SDN usage, make sure your devicescontrollers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN Access Points, Switches Gateways. Non-SDN controllers work only with non-SDN APs. For devices that are compatible with SDN firmware, please visit 'From the manufacturer - QA' section or TP-Link website.. Supporting the latest Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies.. Supports both 802.3afat PoE Passive PoE power supply, making deployment effortless and flexible.. Backed by our industry-leading limited lifetime warranty and free 247 technical support, you can work with confidence..

Network Suite Solution This suite integrates UeeVii CPE450 outdoor wireless bridge and WR3000K WiFi6 router to easily achieve point-to-point wireless network expansion Adding a slave side router boosts signal strength to meet diverse networking needs. Enhanced Dual 100Mbps Ports The 5.8G outdoor wifi bridge provides reliable connections with dual 10100Mbps RJ45 ports, offering data transfer speeds of up to 300Mbps between point-to-point bridges, perfect for stable network extension. Versatile Network Expansion Effortlessly extend your network to an old house, barn, shop, or garage by wifi point to point bridge outdoor Share the internet with neighbors or family members and save on subscription fees. Effortless Surveillance Setup Wifi bridge point-to-point outdoor wire connects IP cameras to monitor large areas such as lanes, yards, or farms. No need for complex wiring, saving you time and costs. 3KM Transmission Range Achieve up to 3km barrier-free transmission The PTP wireless bridge's built-in 14dBi high-gain directional antenna needs a clear line of sight for the best performance Face-to-face positioning is recommended for optimal use. Upgraded Wide Voltage Bridge The bridges LAN2 port supports non-standard 24V48V and standard 48V power supply, while LAN1 supports non-standard 24V48V This upgraded p2p wireless bridge provides more flexibility and reliability for your power supply. Dual Band WiFi6 Router Equipped with WiFi 6 and a 6-antenna design, this gigabit router enhances signal coverage and data efficiency The wireless router supports 2.4G and 5.8G dual-band for stable, smooth connections anywhere in your home. 2 Installation Options The wireless ethernet bridge comes with hoops that support pole and wall mounting Select the method that fits your needs for easy installation at height or on walls, enhancing your network's convenience and flexibility. Weather-Resistant Design The wifi ethernet bridge IP65-rated weatherproof casing ensures reliable operation in harsh outdoor environments, with protection against rain, dust, and freezing conditions. Plug and Play Simplicity The pre-configured wireless bridge point to point outdoor is ready to use out of the box. If reconfiguration is needed, easily pair them with a simple dial, ensuring hassle-free installation.

What is CPE131 Wifi Ethernet Bridge KuWFi CPE131 is a 5.8G Long Distance Outdoor Wireless Bridge CPE with an LED display.Pre-Configured Bundle of 2 for WiFi Coverage and CCTV Project. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional work for Starlink Satellite Internet Signal Extend .. Point to Point wireless bridge 100Mbps WANLAN PortPoint to point wireless bridge outdoor equipped with 100Mbps ethernet port. The wireless bridge provides higher speed for all users to ensure that they have access to better WiFi service. You can connect your home to other building without either a spool of burial-grade cable or professional expertise. Our wifi bridge point to point outdoor can quickly establish a PTP PTMP connection.. 2KM Wireless Bridge Transmission DistanceWireless bridge point to point outdoor built-in 12dBi High-gain antenna, it provides up to 900Mbps wireless speeds, PTP WiFi distance up to 2000 metersbarrier-free, which significantly improves the coverage and WiFi signal stablity. The wifi bridge is recommended for factory, barn, garden, car park, warehouse, golf course, shops, garage, lake etc.. Point to Point Wireless Bridge Outdoor Weatherproof UseThe point to point wireless bridge use IP65-rated weatherproof shell, all-weather sunscreen, lightning protection, antifreeze, waterproof, dustproof seal design can be used in a variety of outdoor working conditions for stable performance. It also supports SSID broadcastingmulti SSIDs up to 4 and DHCP server.. Multiple Applicable ScenariosCPE131 with PTPPoint to Point, PTMPPoint to Multi-Point, AP and Bridge operation mode, it can widely be used in video, voice, data transmission in long range wireless monitor industrial. 4G outdoor access point supports Wireless AP, Repeater operation mode to meet various long-distance wireless transmission needs, such as buildings, factories, rural areas, construction sites, squares, elevators and other places.. Wireless ethernet bridge Powerful Outdoor Wireless KitIncludes two high-performance CPE131 wifi bridge with ethernet port for long-range outdoor connectivity, two PoE adapters, two LAN cables and user manual.. Usage TipsFull information LED display, include host-client modeH or C,the number behind is the channel number, signal strength, the reset button can complete the reset setting, you can more clearly know the device status. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program and save much human work and cost. If it transmits the wrong gateway and the wrong DNS information. You can try setting a manual IP address with the gateway address of the original modem with the DNS of your choice.. Customer ServiceFor 30 days after the date of purchase, return your KuWFi long range wifi antenna intact and receive a refund for any reason 12 months warranty for quality-related issues, we take care of all quality-related issues with a REPLACEMENT OR REFUND.and all wireless bridge come with 3 Years Warranty.

PRE-CONFIGURED FOR CONVENIENCE - Ready to use out of the box with no complex setup required, Plug and Play.. HIGH SPEED PERFORMANCE - 5GHz connection delivering over 150 Mbps throughput for fast and reliable data transmission.. ADVANCED NOISE IMMUNITY - Ensures optimal performance even in high-interference environments.. LONG-RANGE CAPABILITIES - Ideal for Point to Point and Point to Multipoint applications, covering extensive distances.. VERSATILE APPLICATIONS - Perfect for extending networks across buildings, connecting remote locations, or providing wide-area wireless internet access.. 1 Year Warranty and Support provided by Epsilont.

IEEE 802.11ac Wave 2 MU-MIMOEnhance throughput with simultaneous communication to multiple wireless clients, ensuring a superior user experience.. Dual-band VersatilitySupports both 2.4 GHz and 5 GHz bands concurrently, accommodating a wider range of client devices and tripling the connection capacity compared to single-band APs.. Gigabit Internet SpeedsAchieve up to 1167 Mbps dual-band data rates, coupled with a 1000 Mbps Ethernet port for ultra-fast internet connections.. Optimized Omni-directional AntennasMaximizes wireless signal coverage and strength, ensuring reliable connectivity throughout your environment.. Resource Allocation FairnessImplements air interface scheduling to equitably distribute network resources, optimizing overall wireless network speed. Customize RSSI threshold values to manage client connections effectively based on signal strength..

SUPERIOR PENETRATION RANGE Stop struggling with 2.4G5G signals that fail at the first wall. Unlike standard wireless bridges, our WiFi HaLow technology operates on the 902-928MHz Sub-1GHz band. This allows for massive diffraction and wall penetration, reliably extending your network up to 1-2 km 1.2 Miles. Perfect for point to point wireless bridge outdoor setups where obstacles are unavoidable.. V2 UPGRADED 27dBm HIGH POWER While competitors offer standard signal strength, our V2 Dongle is engineered with an upgraded 271 dBm transmit power. This hardware boost ensures a rock-solid wireless access point connection even in challenging environments. Experience stable long-range transmission with data rates up to 32.5 Mbps, eliminating the lag often found in inferior wifi bridge models.. VERSATILE MULTI-MODE CONNECTIVITY Designed for the modern IoT ecosystem, this point to point wireless bridge supports USB Type-C, Ethernet, and 2.4GHz WiFi connections. Featuring four bandwidth modes 1248MHz, it adapts to your needswhether its high-speed video monitoring or ultra-low-power sensor networks. It acts as a smart bridge between legacy devices and the new HaLow standard.. PLUG PLAY STAR NETWORKING Deployment is effortless with our factory-matched pair. No complex configuration required for basic point-to-point communication. For larger scale operations like farmland IoT, warehouse logistics, or campus network extension, these units can work seamlessly with a HaLow gateway to create a robust star network covering every corner of your property.. INDUSTRIAL-GRADE DURABILITY SUPPORT Built to replace costly Ethernet cables in harsh conditions, this outdoor access point solution is ideal for smart street lighting, remote monitoring, and smart home expansion. Each package includes a complete APSTA pair with antennas and cables. We provide professional technical documentation to ensure your long-range wireless setup is optimized for peak performance..

Widely Application This pole mount bracket is for easy installation of outdoor antennas for all wireless bridges, CPE, outdoor security cameras for home or other wireless systems. TIP Weight capacity of 4 pounds within the use of the best results, high load is not recommended to use. 150 Degree Adjustment The wireless bridge mount pole can be adjusted 150up and down. After you install the CPE or antenna, adjust the angle of the pole to receive a stronger signal. Stability This antenna mount comes with non-slip gears. After adjusting the angle of the pole, you only need to give it a slight twist and the pole will be securely fixed. And this pole mount bracket is equipped with two hoops, which can completely secure your bracket firmly to the pole. Waterproof This antenna mounting pole has a painted surface and is equipped with a waterproof cap on top to prevent rain from entering the bracket and rusting. This makes this bracket mount a good waterproof performance. With proper installation, can withstand rain. Two Installation Methods This antenna mount pole bracket can be installed on a pole or wall-mounted, both installation methods are very simple, you can choose according to your needs.

866Mbps wireless bridge, 4KM ultra-long-distance transmission WiFi, you can perform point-to-point pairing by dialing without entering the GUI, eliminating the need for complicated setup procedures, the factory default pairing, no additional settings, plug and play. Make long-distance wireless coverage, data transmission and wireless monitoring simple and professional. 5.8G frequency band wireless transmission, avoiding the 2.4G frequency band commonly used by household and handheld devices, effectively reducing interference and achieving high-speed transmission. Transmitreceive automatic networking, support point-to-point, point-to-multipoint.. It supports two power supply modes power adapter and Passive 24V PoE. Passive PoE power supply distance can reach 70 meters. It is easy to install and deploy, simplify construction, and is safe and reliable.. Professional outdoor design, suitable for various harsh environments. Waterproof, high temperature resistance, low temperature resistance, dustproof, lightning protection, anti-aging.. Every NICGIGA Wireless Bridge is rigorously tested for reliability, quality and performance. We provide lifetime technical support for the entire product..

Designed for Starlink Internet expansionThe point-to-point wireless bridge is compatible with Starlink third-generation routers and second-generation Ethernet adapters. This point-to-point wireless bridge can help extend the internet from the main router to a second building without digging trenches to lay cables.. Outdoor long-distance connection up to 3 kilometers The gigabit wireless bridge is designed for outdoor network expansion on the 5.8GHz band, helping to connect barns, garages, workshops, warehouses, farms, cabins, and other auxiliary buildings. Optimal performance requires unobstructed line of sight.. Up to 1000MBPS Transmission The long range WiFi bridge supports high-speed data transmission between buildings, suitable for HD video streaming, security cameras, remote work, file sharing, and other applications that require a stable long-distance connection.. 14DBI HIGH-GAIN ANTENNA FOR STRONGER SIGNALThe directional high-gain antenna improves signal reception and anti-interference performance, helping maintain a more reliable connection across open outdoor spaces.. The plug-and-play IP65 outdoor design Starlink WiFi extender is specially designed for outdoor installation, featuring an IP65 protection rating and an included PoE power adapter, making it easier to deploy in residential, rural, commercial, and industrial environments..

Network Suite Solution This suite integrates UeeVii CPE450 outdoor wireless bridge and WR3000K WiFi6 router to easily achieve point-to-point wireless network expansion Adding a slave side router boosts signal strength to meet diverse networking needs. Enhanced Dual 100Mbps Ports The 5.8G outdoor wifi bridge provides reliable connections with dual 10100Mbps RJ45 ports, offering data transfer speeds of up to 300Mbps between point-to-point bridges, perfect for stable network extension. Versatile Network Expansion Effortlessly extend your network to an old house, barn, shop, or garage by wifi point to point bridge outdoor Share the internet with neighbors or family members and save on subscription fees. Effortless Surveillance Setup Wifi bridge point-to-point outdoor wire connects IP cameras to monitor large areas such as lanes, yards, or farms. No need for complex wiring, saving you time and costs. 3KM Transmission Range Achieve up to 3km barrier-free transmission The PTP wireless bridge's built-in 14dBi high-gain directional antenna needs a clear line of sight for the best performance Face-to-face positioning is recommended for optimal use. Upgraded Wide Voltage Bridge The bridges LAN2 port supports non-standard 24V48V and standard 48V power supply, while LAN1 supports non-standard 24V48V This upgraded p2p wireless bridge provides more flexibility and reliability for your power supply. Dual Band WiFi6 Router Equipped with WiFi 6 and a 6-antenna design, this gigabit router enhances signal coverage and data efficiency The wireless router supports 2.4G and 5.8G dual-band for stable, smooth connections anywhere in your home. 2 Installation Options The wireless ethernet bridge comes with hoops that support pole and wall mounting Select the method that fits your needs for easy installation at height or on walls, enhancing your network's convenience and flexibility. Weather-Resistant Design The wifi ethernet bridge IP65-rated weatherproof casing ensures reliable operation in harsh outdoor environments, with protection against rain, dust, and freezing conditions. Plug and Play Simplicity The pre-configured wireless bridge point to point outdoor is ready to use out of the box. If reconfiguration is needed, easily pair them with a simple dial, ensuring hassle-free installation.

Wall and Pole Installation This point to point wireless bridge mount bracket offers the flexibility to be mounted on either a wall or a pole, allowing you to choose the installation method that best suits your needs. This convenience makes it easy to set up according to your preferences.. Waterproof and Dustproof Constructed with durable iron material, this wireless bridge bracket mount is perfect for long-term outdoor antenna installations. It is resistant to bending, breaking, snapping, or cracking under normal usage, ensuring reliability in various weather conditions such as strong winds and rain. Properly installed, it provides excellent protection against the elements.. 160-degree Adjustability The wireless bridge bracket mount features a rod that can be adjusted up and down by 160, offering a wide range of angle options for optimal signal reception. Adjusting the angle of the rod after installing the CPE allows for stable and reliable connectivity, ensuring signals of different strengths can be received.. Stability Equipped with non-slip gears, the point-to-point wireless bridge pole mount ensures secure installation. Once the angle of the rod is adjusted, a light twist will firmly lock it in place. Additionally, two hoops securely fasten the mount to the rod, providing added stability and peace of mind.. Versatile Application Designed to streamline the installation of outdoor antennas for various devices such as wireless bridges, CPEs, weather stations, Starlink, access points, and WiFi routers, this wireless bridge bracket mount enhances signal strength and connectivity. Its user-friendly design makes it a valuable addition to different setups, ensuring reliable performance.. Improved Stability The universal wireless bridge mount bracket features non-slip gears and a dual screw locking design, providing enhanced stability and outstanding support for devices weighing over 30LB. This robust design ensures secure installation and long-term performance, optimizing signal reception and connectivity.. Flexible Installation This universal mount bracket is designed for versatile installation options, offering both wall and pole mounting. It includes a detachable base plate for easy customization and flexibility to suit various installation needs.. Supports Multiple Devices Suitable for a range of outdoor devices including TV antennas, Ethernet bridges, network extenders, Starlink receivers, WiFi routers, weather stations, wind vanes, meteorological equipment, and outdoor access points, this wireless bridge mount accommodates various devices for seamless integration.. Complete Accessories The wireless bridge pole wall mount bracket includes expansion screws for brick wall installation, four screws for mounting on wooden walls, and two American-style hose clamps for securing the J mounting bracket to an antenna pole, providing all necessary components for easy installation.. Premium Metal Construction Crafted with high-quality iron with metal paint, this wireless bridge mount bracket is built to last, providing sturdy construction for long-lasting durability and robust support for outdoor devices..

? O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km. 1.CCTV Transmission One device in AP mode and another in Station mode create a long-distance wireless link for video surveillance. 2. Internet Sharing Similar setup allows for long-distance wireless internet sharing between buildings or neighbors. 3. Private ISP Access Connect wirelessly to a Private ISP tower to share internet with local wired and wireless networks.. Supports 12V 1A Passive PoE and 12V 1A DC power supply option. It helps the engineer to deploy the device flexiblely. ? Includes centralized management software PC-CPE Assistant for effortless network configuration and device management from a single interface.. ? Equipped with IP65 waterproof enclouse and high quality hardware design, O1-5G can work in various weather conditions, such as sunshine, rainfall or extremely lowhigh temperature environment. -? ? O1-5G supports auto-bridge technology, It enables the CPE or basestation in factory default settings to connect to each other automaticaly after the device is powered on. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application. ? - Tenda's CPE product comes with an industry-leading 3-year warranty, accompanied by complimentary lifetime dedicated technical support. Please feel free to contact us via phone or email..

High-Speed Transmission Featuring advanced 5.8GHz 100Mbps wireless technology and a 16dBi high-gain antenna, our wireless bridge delivers lightning-fast speeds of up to 100Mbps. Operating at a rapid 300Mbps wireless transmission rate, our bridges can achieve transmission distances of up to 2 miles Barrier-free, making them ideal for extending networks further and providing reliable internet access for a wide range of applications.. Long Range High Speed Operating at 5.8GHz frequency with a rapid 300Mbps wireless transmission rate, our bridges can achieve transmission distances of up to 2 miles Barrier-free, making them ideal for extending networks further and providing reliable internet access.. Solar Panel Power Supply IP65 Waterproof Rating Our wireless bridge supports solar panel power supply and features an IP65 waterproof rating for durability in harsh weather conditions, making it ideal for outdoor use without power supply constraints.. PTMP Pre-Programmed Setup Our wireless bridges are pre-programmed for easy setup, allowing for quick and hassle-free installation. Simply connect both bridges using Ethernet cables, and they will automatically pair and establish a connection within a minute, eliminating the need for complex configurations.. 5.8GHz WiFi Band Extended Range Our wireless bridge supports the 5.8GHz band, offering a clear channel free from interference for stable network transmission. With a long-range transmission distance of up to 3km and a built-in 16dBi directional antenna, it significantly enhances signal transmission and reception performance.. Compatible with Starlink Gen 2, Gen 3 Routers Our wireless bridges are compatible with Starlink's second-generation Ethernet adapter, third-generation routers, and Mini LAN Port, enabling seamless integration with the Starlink satellite internet system for reliable network connections.. Plug and Play Installation The Outdoor Point-to-Point Wireless Bridge Kit includes everything needed for easy installation, eliminating the need for additional accessories. The Plug and Play feature simplifies setup, catering to users of all levels, and seamlessly integrates into existing networks for swift expansion.. 24V PoE Injector 2 RJ45 LAN Ports The 24V PoE Injector streamlines installation by combining power and data transmission over a single Ethernet cable, while the two RJ45 LAN ports provide enhanced connectivity options for flexible network configuration and device connectivity..

Long Range Up to 3KM for Star Link Internet With a range of up to 3 kilometers outdoors, the Star Link Extender is well-suited for long-distance network bridging applications. Whether in rural areas, mountainous regions, or remote locations, users can easily access high-speed and stable network connections. This extensive coverage capability provides users with greater flexibility and convenience, enabling them to enjoy connectivity over a wider range.. Compatible with Star Link Gen 3 Router The point to point wireless bridge is compatible with third-generation routers, facilitating seamless integration with the Star Link satellite internet system. Regardless of which generation of Star Link devices users have, they can achieve reliable network connections through this product, enjoying the convenience brought by Star Link satellite internet.. High - speed Data Transmission for Star Link Internet We've adopted gigabit ports. However, due to the influence of the bridging distance, the actual transmission speed for users when transferring data and accessing the Internet is approximately 200Mbps. Nevertheless, whether it's downloading large files, streaming HD videos, or playing online games, a smooth and fast experience is guaranteed. This high - speed data - transmission capability creates possibilities for users to utilize networ. 18dBi High-gain Antennas for Star Link Internet Kit Equipped with 18dBi high-gain antennas, the starlink wifi bridge significantly enhances signal reception and transmission capabilities. These antennas enable the product to cover a wider area and provide stable connections even in areas with weak signals. The design with high-gain antennas offers users stronger signal coverage, allowing them to enjoy stable network connections over a broader range.. Reliability and Stability 5.8GHz WiFi Band The Star Link WIFI Extender operates on the 5.8GHz frequency band, known for its high signal transmission stability and resistance to interference. It maintains a stable network connection even in challenging environments with high levels of wireless signal interference or adverse weather conditions like thunderstorms or strong winds.. 24V PoE Injector The PoE injector included with the Point to Point Wireless Bridge simplifies installation by combining power and data transmission over a single Ethernet cable. This streamlines setup procedures, reducing complexity and minimizing the need for additional power sources. With a 24V output, it ensures efficient power delivery to the wireless bridge, enhancing reliability and convenience during deployment.. Outdoor IP65 Waterproof for Wireless Star Link Bridge The Point to Point Wireless Bridge Outdoor features a weatherproof and durable design, capable of withstanding challenges in various outdoor environments. Whether in extreme heat, cold, or heavy rain, the product can operate stably, providing users with enduring and reliable network connections.. Two RJ45 LAN Ports Two RJ45 LAN ports are included in the Point-to-Point Wireless Bridge, providing enhanced connectivity options and allowing for flexible network configuration. Users can utilize these ports to connect additional devices such as computers, printers, or network switches directly to the bridge, easily expanding the network infrastructure.. Plug and Play The Plug and Play feature of the Point to Point Wireless Bridge revolutionizes installation with its intuitive design, catering to users across all proficiency levels. By eliminating the complexities of traditional setups, it ensures effortless deployment without the necessity for specialized technical skills. Its seamless integration capability into existing networks further enhances convenience, enabling swift expansion or enhancement of connectivity without disruption.. NoteIf you can't connect or can't work properly in the process of using the wireless bridge, please contact us at the first time, we will do our best to help you solve the problem.

Wireless Bridge with Dual Adjustable Mount Brackets The CPE550 Wireless Bridge features two versatile pole mounting bracket kits, facilitating easy installation on walls or poles. These adjustable brackets allow for precise positioning to optimize signal strength, making them ideal for outdoor network extension deployments and point-to-point wireless bridge setups in various environments.. Plug and Play This outdoor point-to-point wireless bridge kit includes two compact bridges with lightweight mounting brackets for easy installation on poles or walls. Factory pre-configured for seamless setup - you simply connect your devices to the master and slave bridges, provide power, and you're ready to go.. 300Mbps Network Speed The connection between two Ethernet bridges can support speeds up to 300 Mbps. The outdoor WiFi bridge features two built-in RJ45 ports supporting 1001000 Mbps, actual providing wireless speeds of up to 300Mbps. Simply connect an access point or router to the slave bridge to broadcast WiFi and establish a reliable wireless network.. Easy to Pair The CPE550 WiFi bridge with mounting brackets features a straightforward plug-and-play design. The dial pairing method allows you to easily connect the master and slave bridges by pressing the A-B buttons. Simply set both bridges to the same number and press the RST button to complete the pairing process.. Extended Starlink WiFi This point-to-point wireless bridge with bracket mount is specifically designed to seamlessly integrate with Starlink's Gen 2 Ethernet Adapter, Gen 3 routers, and Mini LAN Port, ensuring a reliable and stable network connection with your Starlink satellite internet system. It is ideal for effortlessly connecting remote buildings, barns, shops, farms, garages, warehouses, or security cameras, providing a versatile solution for extending your network coverage.. Extended Network WiFi Connect the master bridge to your primary router with internet access. Then, connect the slave bridge to the secondary WiFi router where you want to extend the network - such as a neighbor's house, store, barn, or garage. This point-to-point configuration allows you to extend your network efficiently and cost-effectively. Additionally, the network relay function can be achieved using two pairs of wireless bridges, enabling seamless coverage over longer distances.. Extended-Range Surveillance System Features a highly optimized deep protocol for wireless video transmission, ensuring high-speed, smooth, and reliable surveillance. The underlying wireless driver is specially engineered for enhanced anti-interference capabilities and superior stability. Supports both point-to-point and point-to-multipoint connections, allowing expanded monitoring coverage to effectively safeguard your property.. Solar-Powered Ip65 Waterproof Rating This ethernet wireless bridge is designed for outdoor use, supporting solar panel power supply for enhanced flexibility and sustainability. It features an IP65 waterproof rating, ensuring reliable performance and durability in harsh weather conditions. Easily powered by connecting to a DC 12V socket with a minimum current of 1000mA, making installation straightforward and convenient even in locations without an external power source.. 3km Long-Distance Wireless Transmission Equipped with automatic power adjustment to adapt to environmental changes, ensuring seamless video quality even at very close distances. Capable of reaching up to 3 kilometers in unobstructed, line-of-sight conditions. For optimal performance, deploy the wireless bridge face-to-face with a clear line of sight, and keep actual application distances below 3 kilometers without any obstructions.. High-Performance 5.8ghz Ethernet Bridge The CPE550 Wireless Bridge operates at 5.8GHz, providing high-performance, long-range building-to-building connectivity. Its digital tube display enables simple point-to-point pairing by dialing, eliminating complex GUI setup and saving time and costs. Designed for reliable data transmission, it ensures seamless coverage and easy wireless monitoring. Supporting dynamic MIMO Power Saving Mode DMPS and Automatic Power-Saving Transmission APSD, it offers enhanced energy efficiency. Compatible with 24V to 48V PoE power supply, the CPE550 is easy to install and deploy, streamlining construction while ensuring network safety and reliability..

Compatible with Starlink Gen 2 Ethernet Adapter or Gen 3 Router and Mini Lan Port The point to point wireless bridge is compatible with Starlink's second-generation Ethernet adapter, third-generation routers and Mini LAN Port, facilitating seamless integration with the Starlink satellite internet system. Regardless of which generation of Starlink devices users have, they can achieve reliable network connections through this product, enjoying the convenience brought by Starlink satellite internet.. Long Range Up to 2KM for Starlink Internet With a range of up to 2 kilometers1.2 Miles outdoors, the Starlink Extender is well-suited for long-distance network bridging applications. Whether in rural areas, mountainous regions, or remote locations, users can easily access high-speed and stable network connections. This extensive coverage capability provides users with greater flexibility and convenience, enabling them to enjoy connectivity over a wider range.. 100Mbps High-speed Data Transmission for Starlink Internet Supporting speeds of up to 100Mbps for WiFi bridging, users can transfer data and access the internet with almost no latency. Whether downloading large files, streaming HD videos, or playing online games, smooth and fast experiences are guaranteed. This high-speed data transmission capability opens up possibilities for users to utilize network resources more effectively, enhancing both work and entertainment efficiency.. 14dBi High-gain Antennas for Starlink Internet Kit Equipped with 14dBi high-gain antennas, the starlink wifi bridge significantly enhances signal reception and transmission capabilities. These antennas enable the product to cover a wider area and provide stable connections even in areas with weak signals. The design with high-gain antennas offers users stronger signal coverage, allowing them to enjoy stable network connections over a broader range.. Reliability and Stability 5.8GHz WiFi Band The Starlink WiFi Extender operates on the 5.8GHz frequency band, known for its high signal transmission stability and resistance to interference. It maintains a stable network connection even in challenging environments with high levels of wireless signal interference or adverse weather conditions like thunderstorms or strong winds. This ensures uninterrupted network connectivity and consistent speeds for users, whether for home or commercial deployments.. Outdoor Weatherproof, Solar Panel Power Supply, and IP65 Waterproof Rating The Point to Point Wireless Bridge Outdoor is designed to withstand challenges in various outdoor environments with its weatherproof and durable construction. It features a solar panel power supply option and an IP65 waterproof rating, ensuring longevity and reliability even in harsh weather conditions such as extreme heat, cold, or heavy rain. This makes it suitable for a wide range of outdoor applications, including agriculture and industrial parks, offering users durable and stable network connections.. 24V PoE Injector The PoE injector included with the Point to Point Wireless Bridge simplifies installation by combining power and data transmission over a single Ethernet cable. This streamlines setup procedures, reducing complexity and minimizing the need for additional power sources. With a 24V output, it ensures efficient power delivery to the wireless bridge, enhancing reliability and convenience during deployment. Its integrated design eliminates the necessity for separate power adapters, optimizing space utilization and contributing to a tidier installation process. This feature underscores the product's commitment to user-friendly operation and efficient connectivity solutions.. 2 RJ45 LAN Port Two RJ45 LAN ports are included in the Point-to-Point Wireless Bridge, providing enhanced connectivity options and allowing for flexible network configuration. Users can utilize these ports to connect additional devices such as computers, printers, or network switches directly to the bridge, easily expanding the network infrastructure. This feature facilitates the creation of local area networks LANs or the integration of multiple devices into a network for seamless data sharing and communication within a networked environment.. Plug and Play The Outdoor Point-to-Point Wireless Bridge Kit includes 2 bridges with low-light mounting brackets for easy installation on poles or walls. This complete kit eliminates the need for additional accessories and features a weatherproof design for outdoor use. The Plug and Play feature simplifies installation, catering to users of all levels. It seamlessly integrates into existing networks for swift expansion without technical skills required.. Note If you can't connect or can't work properly in the process of using the wireless bridge, please contact us at the first time, we will do our best to help you solve the problem.

REUMAR AH-WiFi Extender is a device designed to extend the range of your wireless network. It acts as a relay for your existing wireless router, boosting the signal and transmitting it to areas with weaker coverage. Usally for extending network for IP Camera.. REUMAR WiFi Extender supports 2.4GHz frequency only, allowing for faster and more reliable connections. It features built-in antennas that enhance signal strength and stability.. Setting up the AH-WiFi Extender is effortless. Simply plug usb into the power adapter and network cable to the router,then it will connect it to your existing wireless network, and you're ready to go.. - REUMAR WiFi Extender built-in Omni-directional antennaThe transmission distance is considerable, with a visual range of up to 1000 meters, Easily penetrate through three walls.. ? The REUMAR WiFi Extender operates at a frequency of 902-928MHz, the bandwidth is only 8M, The maximum transmission rate is 16Mbps, which depends on your devices and network environment. It is important to note that the actual speed may be affected by interference, distance, and other wireless signals. The REUMAR WiFi Extender can support a maximum of 8 connected devices..

5.8GHz WiFi Band Operating on the 5.8GHz frequency band, the Starlink WIFI Extender ensures high signal transmission stability and resistance to interference. It maintains a reliable network connection even in challenging environments characterized by high levels of wireless signal interference or adverse weather conditions like thunderstorms or strong winds. This guarantees uninterrupted network connectivity and consistent speeds for users, whether for home or commercial deployments.. 100Mbps High-speed Data Transmission for Starlink Internet Supporting speeds of up to 100Mbps for WiFi bridging, users can transfer data and access the internet with minimal latency. Whether downloading large files, streaming HD videos, or engaging in online gaming, smooth and fast experiences are assured. This capability for high-speed data transmission enables users to leverage network resources more efficiently, enhancing both work productivity and entertainment experiences.. Long Range Up to 2 KM for Starlink Satellite Internet Extension With a transmission range of up to 2 kilometers outdoors, the Starlink Extender is ideal for long-distance network bridging applications. Whether in rural areas, mountainous regions, or remote locations, users can effortlessly access high-speed and stable network connections. This extensive coverage capability offers users greater flexibility and convenience, allowing them to enjoy connectivity across a broader range of environments.. 12dBi High-gain Antennas for Starlink Internet Kit Featuring 12dBi high-gain antennas, the Starlink wifi bridge significantly enhances signal reception and transmission capabilities. These antennas enable the product to cover a wider area and provide stable connections even in areas with weak signals. The inclusion of high-gain antennas in the design ensures stronger signal coverage, enabling users to enjoy stable network connections over a broader range of environments.. Included Wall Mount Bracket The Outdoor Point-to-Point Wireless Bridge Kit includes 2 bridges and 2 low-light mounting brackets with accessories. These brackets facilitate mounting on poles and walls, allowing you to adjust the installation angle for optimal alignment of both bridges. It's a complete kit, eliminating the need to purchase additional accessories. The kit features a weatherproof and durable design capable of withstanding challenges in various outdoor environments, including extreme heat, cold, or heavy rain.. Compatible with Starlink Gen 2 Ethernet Adapter or Gen 3 Router The point to point wireless bridge is compatible with Starlink's second-generation Ethernet adapter and third-generation routers, facilitating seamless integration with the Starlink satellite internet system. Regardless of which generation of Starlink devices users have, they can achieve reliable network connections through this product, enjoying the convenience brought by Starlink satellite internet.. Plug and Play Starlink WiFi Extender The Plug and Play feature of the Point to Point Wireless Bridge revolutionizes installation with its intuitive design, catering to users across all proficiency levels. By eliminating the complexities of traditional setups, it ensures effortless deployment without the necessity for specialized technical skills. Its seamless integration capability into existing networks further enhances convenience, enabling swift expansion or enhancement of connectivity without disruption.. 24V PoE Power Injector The Point-to-Point Wireless Bridge includes a PoE injector, simplifying installation by consolidating power and data transmission through a single Ethernet cable. This simplifies setup, reducing complexity and the need for extra power sources. With a 24V output, it ensures efficient power distribution to the bridge, enhancing reliability and convenience during deployment. Its integrated design removes the requirement for separate power adapters, optimizing space usage and contributing to a neater installation process. This aspect highlights the product's dedication to user-friendly operation and efficient connectivity solutions.. 2 Ethernet RJ45 LAN Port The Point-to-Point Wireless Bridge boasts two RJ45 LAN ports, enriching connectivity options and enabling versatile network setup. Users can employ these ports to directly link supplementary devices like computers, printers, or network switches to the bridge, effortlessly enlarging the network infrastructure. This attribute streamlines the establishment of local area networks LANs or the amalgamation of various devices into a network, facilitating seamless data exchange and communication within a networked environment.. Note If you can't connect or can't work properly in the process of using the wireless bridge, please contact us at the first time, we will do our best to help you solve the problem.

READY TO USE Pre-configured for convenience, with no complex setup required simply Plug and Play. LBE 5AC GEN 2.. HIGH-SPEED CONNECTIVITY LBE 5AC GEN 2 works in the 5GHz frequency band and delivers over 450 Mbps throughput for fast and reliable data transmission from the Access Point over the Remote Station or multiple Remote Stations.. MULTIPLE APPLICATIONS Ideal for expanding network coverage between buildings, linking distant sites, or offering broad-area wireless internet connectivity.. LONG-RANGE CAPABILITIES Perfect for Point-to-Point and Point-to-Multipoint setups, enabling connectivity over long distances.. EXCEPTIONAL NOISE IMMUNITY Ensures peak performance even in environments with significant interference.. PACKAGE INCLUDES 2 Paired LiteBeam 5 AC GEN 2, 2 POE Injectors with power cords, 2 PoleWall mounts, and an easy-to-follow Installation guide. MIMO Technology. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments..

NanoBeam M5 Exclusive Bundle Expertly configured set of 2 NanoBeam M5-16 NBE-M5-16 devices for seamless Point-to-Point Bridge functionality.. Optimized Performance Meticulously fine-tuned by our skilled professionals, eliminating the complexities of manual configuration.. Comprehensive Package Includes 2 Paired NanoBeam M5 devices, 2 POE Injectors with power cords, 2 PoleWall mounts, and an easy-to-follow Installation guide.. Comprehensive Package Includes 2 Paired NanoBeam M5 devices, 2 POE Injectors with power cords, 2 Pole and Wall mounts, and an easy-to-follow Installation guide.. Effortless Point-to-Point Connectivity Establish a high-speed, secure, and stable wireless bridge for seamless data, voice, and video transmission across long distances.. Versatile Applications Perfect for connecting separate buildings, extending network coverage, or establishing a reliable link for surveillance systems.. Reliable Performance Enjoy optimal performance and connectivity with the bundled NanoBeam M5 devices, designed to meet your networking needs..

Long Range Up to 3KM for Starlink Internet With a range of up to 3 kilometers outdoors, the Starlink Extender is well-suited for long-distance network bridging applications. Whether in rural areas, mountainous regions, or remote locations, users can easily access high-speed and stable network connections. This extensive coverage capability provides users with greater flexibility and convenience, enabling them to enjoy connectivity over a wider range.. Compatible with Starlink Gen 2 Ethernet Adapter or Gen 3 Router The point to point wireless bridge is compatible with Starlink's second-generation Ethernet adapter and third-generation routers, facilitating seamless integration with the Starlink satellite internet system. Regardless of which generation of Starlink devices users have, they can achieve reliable network connections through this product, enjoying the convenience brought by Starlink satellite internet.. 1000Mbps High-speed Data Transmission for Starlink Internet Supporting speeds of up to 100Mbps for WiFi bridging, users can transfer data and access the internet with almost no latency. Whether downloading large files, streaming HD videos, or playing online games, smooth and fast experiences are guaranteed. This high-speed data transmission capability opens up possibilities for users to utilize network resources more effectively, enhancing both work and entertainment efficiency.. 18dBi High-gain Antennas for Starlink Internet Kit Equipped with 18dBi high-gain antennas, the starlink wifi bridge significantly enhances signal reception and transmission capabilities. These antennas enable the product to cover a wider area and provide stable connections even in areas with weak signals. The design with high-gain antennas offers users stronger signal coverage, allowing them to enjoy stable network connections over a broader range.. Reliability and Stability 5.8GHz WiFi Band The Starlink WIFI Extender operates on the 5.8GHz frequency band, known for its high signal transmission stability and resistance to interference. It maintains a stable network connection even in challenging environments with high levels of wireless signal interference or adverse weather conditions like thunderstorms or strong winds. This ensures uninterrupted network connectivity and consistent speeds for users, whether for home or commercial deployments.. Outdoor IP65 Waterproof for Wireless Starlink Bridge The Point to Point Wireless Bridge Outdoor features a weatherproof and durable design, capable of withstanding challenges in various outdoor environments. Whether in extreme heat, cold, or heavy rain, the product can operate stably, providing users with enduring and reliable network connections. This outdoor durable design makes the product suitable for various outdoor scenarios such as agriculture and industrial parks, offering users a wider range of application options.. 24V PoE Injector The PoE injector included with the Point to Point Wireless Bridge simplifies installation by combining power and data transmission over a single Ethernet cable. This streamlines setup procedures, reducing complexity and minimizing the need for additional power sources. With a 24V output, it ensures efficient power delivery to the wireless bridge, enhancing reliability and convenience during deployment. Its integrated design eliminates the necessity for separate power adapters, optimizing space utilization and contributing to a tidier installation process. This feature underscores the product's commitment to user-friendly operation and efficient connectivity solutions.. Plug and Play The Plug and Play feature of the Point to Point Wireless Bridge revolutionizes installation with its intuitive design, catering to users across all proficiency levels. By eliminating the complexities of traditional setups, it ensures effortless deployment without the necessity for specialized technical skills. Its seamless integration capability into existing networks further enhances convenience, enabling swift expansion or enhancement of connectivity without disruption.. 100Mbps1000Mbps RJ45 LAN Port Two RJ45 LAN ports are included in the Point-to-Point Wireless Bridge, providing enhanced connectivity options and allowing for flexible network configuration. Users can utilize these ports to connect additional devices such as computers, printers, or network switches directly to the bridge, easily expanding the network infrastructure. This feature facilitates the creation of local area networks LANs or the integration of multiple devices into a network for seamless data sharing and communication within a networked environment.. NoteIf you can't connect or can't work properly in the process of using the wireless bridge, please contact us at the first time, we will do our best to help you solve the problem.

5GHz WiFi AC867 point-to-point bridge kit Includes two preconfigured TEW-840APBO access points. MANUFACTURER PROTECTION We stand by the quality of our products.The TEW-840APBO2K 14 DBI WiFi AC867 Outdoor Poe Preconfigured Point-to-Point Bridge Kit is backed and supported with 3 years of TRENDnet Manufacturer Protection.. NDAA TAA COMPLIANT With our NDAA and TAA compliant Wireless AC, you can plan and install networking solutions that Government customers demand today U.S. and Canada Only. RELIABLE TECH SUPPORT Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers.. PRECONFIGURED POINT-TO-POINT BRIDGE Reduce installation and setup time with this preconfigured and pre-encrypted long-range outdoor WiFi bridge kit.. POE POWER ADAPTERS Included proprietary PoE power adapters provide power and data over a single Ethernet cable with a maximum distance of 60m 197 ft... OUTDOOR READY Built for outdoor environments with an IP56 weather rating, and an operating temperature range of -10 60 C 14 140 F.. DIRECTIONAL ANTENNAS Built-in 14 dBi directional antennas. MOUNTING HARDWARE Pole and wall mount hardware included. LED INDICATORS LEDs convey wireless link quality.

1. Dual Installation Options This versatile wireless bridge bracket mount can be easily installed on either a pole or wall, giving you flexibility to choose the method that best suits your needs. Both installation processes are straightforward and user-friendly.. 2. Premium Quality Construction Engineered to endure the toughest conditions, this J pole is designed to resist bending, breaking, snapping, or cracking under normal use. With proper installation, it stands strong against powerful winds and heavy rain.. 3. 150-Degree Adjustable Design The rod of the wireless bridge bracket mount can be adjusted up to 150 degrees vertically. This allows you to fine-tune the angle after installing your CPE, ensuring optimal signal reception from various directions.. 4. Enhanced Stability Featuring a non-slip gear design, this mount ensures that once you adjust the rods angle, a simple twist will securely lock it in place. Additionally, it comes with 4 hoops for an extra secure fit, keeping your mount firmly attached to the pole.. 5. Weather-Resistant Finish Coated with a durable paint and equipped with a waterproof cap at the top, this J pole mount is built for outdoor use. It delivers long-lasting performance, reliably withstanding harsh weather conditions like strong winds and rain..

Stable High-speed Wireless Bridging with Dual Operating Modes Offers point-to-point or point-to-multipoint wireless bridging solutions to meet networking needs in different scenarios, creating a reliable wire-grade network connection for your outbuildings.. Engineered Specifically for Extending Network Coverage to Outbuildings Effortlessly extend a stable main house network including Starlink to detached garages, warehouses, workshops or farmhouses, and effectively eliminate signal dead zones.. High-gain Directional Antenna 5.8GHz Frequency Band Equipped with a 14dBi high-gain directional antenna and paired with the 5.8GHz frequency band featuring strong anti-interference performance, it is designed to enhance the efficiency and stability of directional signal transmission actual performance is subject to environmental and distance factors.. Outdoor Rugged Design Boasting an IP65 waterproof and dustproof rating, the device is built exclusively for outdoor installation and can withstand common rainy and windy weather conditions.. Simplified Installation with Single-cable Power data Transmission Adopts 24V Passive PoE technology, enabling simultaneous power supply and data transmission via a single network cable to simplify outdoor wiring and allow for hassle-free installation.. Compatible with Mainstream Routers please check model compatibility Designed to work in tandem with most standard routers including the Starlink Gen 3 Router for seamless network expansion users are recommended to verify the interface compatibility of their routers..

Point to Point Wireles BridgeCPE355 is a 5.8G long range wifi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability.The 5.8G wireless bridge outdoor is capble sharing internet to remote location up to 2KMBarrier Free and its point to point paring function save you much time and effort from complex wire setup process.It is a simple,easy and professional way for long range wireless coverage,data transmit,wireless monitoring.. Easy to Installation - Pre-configured CPE Kit with build in 10dBi panel antenna, the transmitreceive point to point wireless distance more than 1-2KM meters.suitable for long range video transmission point to point wifi cover, It support Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode ,no need seting , it can work two unit at the same time , no need long cable for connect to camera with your PC. Long Range Transmission Distance - Up to 2km visible unobstructed environment, actual application distance should be less than 2KM. Built-in 10DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house. Widely Applications - Any place required cameras Point to PointMulti-Point connection Client Bridge for Elevator Monitornetworks. Outdoor CPE Connect an IP Wireless Camera to a secondary port and utilize its long-range connectivity to send video back through the wireless network for extended coverage. Built for Outdoor Wi-Fi Coverage - IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold,heat or continuous moisture.Lightning Protection,Waterproof,Dustproof,Antifreeze,High-Temperature Resistant, With software-enabled PoE output,the secondary Ethernet port can power an external device,such as a PoE security camera,for seamless IP video integration.

INCREDIBLE SPEED - Experience 450 Mbps throughput with the NanoBeam ac Gen2, ideal for demanding applications requiring a reliable, high-speed connection across distances of 15 km.. RELIABLE PERFORMANCE - Powered by an Atheros MIPS 74Kc 720 MHz processor, 128MB DDR2 memory, and 8MB Flash, ensuring stable operation and efficient data processing for consistent connectivity.. STRONG SIGNAL - The integrated 19 dBi gain antenna with dual linear polarization delivers a focused and powerful signal, minimizing interference and maximizing range for superior network performance.. EASY SETUP - Features a dedicated Wi-Fi radio for management, simplifying device configuration and monitoring via intuitive software, streamlining the installation process for quick deployment.. WIDE COVERAGE - Adjustable channel sizes 10203040506080 MHz in PtP, 10203040 MHz in PtMP optimize bandwidth, providing extensive coverage and flexible network configurations to suit various environments..

Built-in 13dBi 2x2 dual-polarized directional MIMO antenna. Adjustable transmission power from 0 to 27dBm500mW. System level optimizations for more than 15km long-range wireless transmission only for paired Point-to-Point or Point-to-MultiPoint transmission. TP-Link Pharos maxtream tdma Time-Division-Multiple-Access technology improves product performance in throughput, capacity and latency performance, ideal for ptmp applications. Centralized management system - Pharos control. AP client AP router AP client router WISP operation modes. Passive PoE adapter supports up to 60 meter 200 feet power over Ethernet deployment and allows the device to be reset remotely. Connectivity technology Wi-Fi Built In.

23 dBi Directional 2 2 MIMO Antenna, 256 QAM and an 80 MHz bandwidth boosts overall speeds up to 867 Mbps.. ?-? Excellent beam directivity, improved latency, and noise immunity makes CPE710 an ideal choice and cost-effective solution for outdoor long-distance wireless networking applications.. ? Snap-lock parts make assembly simple and convenient. Pole mount kits and the freedom of three-axis alignment facilitate flexible installation. Sturdy design ensures stability in windy conditions.. ? CPE710 comes equipped with Pharos Control centralized management software, the web-based PharOS provides an alternative management method and allows professionals to access more detailed configurations.. Durable IP65 weatherproof enclosure along with 15kV ESD and 6kV lightning protection ensures all-weather suitability..

5.8GHz WiFi Band Operating on the 5.8GHz frequency band, the Starlink WIFI Extender ensures high signal transmission stability and resistance to interference. It maintains a reliable network connection even in challenging environments characterized by high levels of wireless signal interference or adverse weather conditions like thunderstorms or strong winds. This guarantees uninterrupted network connectivity and consistent speeds for users, whether for home or commercial deployments.. 100Mbps High-speed Data Transmission for Starlink Internet Supporting speeds of up to 100Mbps for WiFi bridging, users can transfer data and access the internet with minimal latency. Whether downloading large files, streaming HD videos, or engaging in online gaming, smooth and fast experiences are assured. This capability for high-speed data transmission enables users to leverage network resources more efficiently, enhancing both work productivity and entertainment experiences.. Long Range Up to 1.5KM for Starlink Satellite Internet Extension With a transmission range of up to 1.5 kilometers outdoors, the Starlink Extender is ideal for long-distance network bridging applications. Whether in rural areas, mountainous regions, or remote locations, users can effortlessly access high-speed and stable network connections. This extensive coverage capability offers users greater flexibility and convenience, allowing them to enjoy connectivity across a broader range of environments.. 14dBi High-gain Antennas for Starlink Internet Kit Featuring 14dBi high-gain antennas, the Starlink wifi bridge significantly enhances signal reception and transmission capabilities. These antennas enable the product to cover a wider area and provide stable connections even in areas with weak signals. The inclusion of high-gain antennas in the design ensures stronger signal coverage, enabling users to enjoy stable network connections over a broader range of environments.. Included Wall Mount Bracket The Outdoor Point-to-Point Wireless Bridge Kit includes 2 bridges and 2 low-light mounting brackets with accessories. These brackets facilitate mounting on poles and walls, allowing you to adjust the installation angle for optimal alignment of both bridges. It's a complete kit, eliminating the need to purchase additional accessories. The kit features a weatherproof and durable design capable of withstanding challenges in various outdoor environments, including extreme heat, cold, or heavy rain.. Compatible with Starlink Gen 2 Ethernet Adapter or Gen 3 Router The point to point wireless bridge is compatible with Starlink's second-generation Ethernet adapter and third-generation routers, facilitating seamless integration with the Starlink satellite internet system. Regardless of which generation of Starlink devices users have, they can achieve reliable network connections through this product, enjoying the convenience brought by Starlink satellite internet.. Plug and Play Starlink WiFi Extender The Plug and Play feature of the Point to Point Wireless Bridge revolutionizes installation with its intuitive design, catering to users across all proficiency levels. By eliminating the complexities of traditional setups, it ensures effortless deployment without the necessity for specialized technical skills. Its seamless integration capability into existing networks further enhances convenience, enabling swift expansion or enhancement of connectivity without disruption.. 24V PoE Power Injector The Point-to-Point Wireless Bridge includes a PoE injector, simplifying installation by consolidating power and data transmission through a single Ethernet cable. This simplifies setup, reducing complexity and the need for extra power sources. With a 24V output, it ensures efficient power distribution to the bridge, enhancing reliability and convenience during deployment. Its integrated design removes the requirement for separate power adapters, optimizing space usage and contributing to a neater installation process. This aspect highlights the product's dedication to user-friendly operation and efficient connectivity solutions.. 2 Ethernet RJ45 LAN Port The Point-to-Point Wireless Bridge boasts two RJ45 LAN ports, enriching connectivity options and enabling versatile network setup. Users can employ these ports to directly link supplementary devices like computers, printers, or network switches to the bridge, effortlessly enlarging the network infrastructure. This attribute streamlines the establishment of local area networks LANs or the amalgamation of various devices into a network, facilitating seamless data exchange and communication within a networked environment.. Note If you can't connect or can't work properly in the process of using the wireless bridge, please contact us at the first time, we will do our best to help you solve the problem.

Ubiquiti NanoStation M5 locoM5 IndoorOutdoor airMAX CPE 5GHz High-Power 2x2 MIMO Point to Point PtP Bridging 2-PACK. The NanoStation M can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE. The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE.. With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.. 150 Mbps real outdoor throughput and up to 10km range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before..

ubiquiti cpe acess point.

Compatibility with Starlink Devices This Point to Point Wireless Bridge is designed to work seamlessly with Starlink Mini, Starlink Gen 2 with Ethernet Adapter and Starlink Gen 3 Router. This ensures that users with different Starlink generations can enjoy reliable internet connectivity without any hassle. The compatibility enhances user experience by integrating effortlessly with existing Starlink systems, making it a versatile choice for all Starlink users.. Plug and Play Convenience The point to point wiresless bridge is pre-configured at the factory with A and B modes. Set one device to A mode and the other to B mode. When powered on, they will automatically pair without any additional setup. Users can set up the wireless bridge without requiring technical skills, ensuring that anyone can enhance their network connectivity with minimal effort.. 3KM Long Range Connectivity With an impressive outdoor range of up to 3 kilometers, this Starlink WiFi Extender is ideal for long-distance applications. It is particularly useful in rural, mountainous, or remote areas where strong internet connections are hard to come by. The long-range capability allows users to maintain high-speed connectivity over extended distances, making it perfect for expansive properties or outdoor events.. Note the Gigabit model supports LAN speeds of 1001000 Mbps on LAN2, while LAN1 is limited to 10100 Mbps. In a point-to-point wireless bridge setup, the wireless transmission speeds between the master and slave devices typically range from 150 to 350 Mbps. Keep in mind that wireless links do not achieve the full 1000 Mbps wired LAN capacity due to the inherent limitations of wireless signal transmission, which reduce maximum throughput.. Enhanced Signal Reception with 14dBi Antennas Featuring 16dBi high-gain antennas, this WiFi bridge improves both signal transmission and reception. The enhanced antennas provide solid coverage, even in areas where signals may be weak. Users can enjoy stable and robust connections over a broader area, ensuring that their internet experience remains uninterrupted.. Reliable Performance on 5.8GHz Band Operating on the 5.8GHz frequency band, this Starlink Extender is engineered for stability and resistance to interference. It maintains a consistent network connection even in challenging conditions, such as high wireless interference or severe weather. This reliability ensures users can depend on their internet connection regardless of environmental factors, whether for home or commercial use.. Durable Outdoor Design Built for outdoor use, this Point to Point Wireless Bridge is weatherproof and durable. It can withstand various environmental challenges, including extreme temperatures and heavy rainfall. This makes it suitable for a variety of outdoor applications, including agriculture and industrial parks, providing enduring connectivity.. 24V PoE Injector for Simplicity The included 24V Power over Ethernet PoE injector simplifies installation by combining power and data transmission over a single cable. This reduces cabling clutter and eliminates the need for additional power sources, making setup easier and more efficient while ensuring reliable power delivery.. Dual RJ45 LAN Ports for Connectivity The bridge features two RJ45 LAN portsone operating at 100 Mbps and the other at 1000 Mbpsproviding versatile connectivity options for additional devices. Users can easily connect computers, printers, or switches directly to the bridge, enabling smooth data sharing and communication within a local area network LAN.. Customer Support Commitment We prioritize customer satisfaction. If users encounter connection issues or difficulties during setup, our dedicated support team is ready to assist promptly. We are committed to ensuring a smooth and enjoyable experience with our product, enhancing user confidence in the purchase..

The Bluedery CPE220 Starlink network bridge is a 5.8G Long Range WiFi Ethernet bridge with a digital display. It is compliant with the 802.11a and 802.11n standards to ensure compatibility. Point-to-point pairing can be easily achieved by dialing without the need to access the GUI, eliminating the requirement for complex setup programs. This simplifies long-range wireless coverage, data transmission, and wireless monitoring, saving time and costs while upholding a professional standard.. Easy Setup with Mounting Bracket This wireless bridge point-to-point outdoor comes with pole and wall mounting kits, making installation a breeze. Simply attach the wireless bridge to the kickstand and secure it to a pole or wall using hose clamps and screws. Connect both WiFi bridges to PoE adapters with Ethernet cables, power on the devices, and wait for them to automatically pair and connect. The Link green LED indicator will illuminate once a successful pairing is achieved.. 5.8GHz WiFi Band This wireless bridge supports the 5.8GHz band, offering a clear channel free from interference signals for a stable network transmission with minimal disruptions. Press the RST button to easily switch channels and optimize performance. It functions effectively as a long-range outdoor WiFi network extender.. Long Range Transmission Distance When connecting both outdoor Wireless Bridges to the PoE power adapter, they will automatically pair without the need for complex configurations on a computer. In point-to-point mode, this bridge can be used for long-range video surveillance, Starlink wifi extender, and internet network sharing. The master bridge creates a Wi-Fi hotspot allowing users to access and extend Wi-Fi coverage up to 1.2 miles in a 60-degree angle in the front direction.. Point-to-Multiple-Point Mode This mode is ideal for video surveillance DVR systems to receive IP camera video streams from various buildings or locations. The master bridge connects to the DVR system, while the slave bridges connect to the IP cameras. This network bridge, also referred to as a long-range Wi-Fi outdoor wireless access point extender, allows you to consolidate IP cameras from different buildings into one system without the need for wiring.. Wide Range of Applications This outdoor wireless bridge is suitable for Point-to-PointMulti-Point connections for elevator monitor networks. It connects an IP wireless camera to a secondary port and utilizes its long-range connectivity to transmit video through the wireless network for extended coverage. This long-range wireless bridge is extensively used in various venues.. Designed for Outdoor Wi-Fi Coverage The IP66-rated weatherproof housing ensures continuous operation in harsh outdoor environments or extreme climates. This outdoor wireless bridge, also known as a WiFi access point extender, can be utilized in any setting, providing lightning protection, waterproofing, dustproofing, antifreeze properties, and high-temperature resistance. The secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.. Plug Play The CPE220 is powered by a 24V PoE adapter included and supports dial pairing without the need to access the GUI. The bridges come pre-configured, simply connect the PoE power supply for automatic pairing of the two bridges. It can help extend your home network to a second building and is also ideal for monitoring purposes.. Solar Panel Power Supply This point-to-point wireless bridge supports solar panel power supply and can be powered by plugging into a DC 5V socket. The minimum current requirement is 500MAH, making it convenient for outdoor use when there is no power supply available.. Starlink Satellite Internet Gen 2 Gen 3 Compatibility This point-to-point wireless bridge extends Starlink router signals to another location using the 5.8G band requires Starlink Ethernet adapter for Gen V2. It simplifies sharing your Starlink internet access across multiple locations in remote areas, serving as a fantastic addition to your Starlink mesh node setup..

Extend Starlink Beyond One Building Bring internet from your Starlink setup to a barn, garage, shop, warehouse, guest house, RV area, or camera location without running long underground Ethernet cables.. Up to 3KM Long-Range Outdoor Transmission Designed for line-of-sight deployment, this 5.8GHz point-to-point wireless bridge helps deliver stable long-distance connectivity with a high-gain directional antenna for stronger signal focus. Stable Connection for Work, Streaming Security Built for daily internet sharing, HD video streaming, IP cameras, remote work, and smart devices, helping reduce signal loss across separate buildings or outdoor spaces. PoE Power Easy Plug-and-Play Setup Power and data travel through one Ethernet cable for a cleaner installation. The pre-configured bridge kit helps reduce setup time and makes deployment easier for homes, farms, and job sites. Flexible PtP PtMP Network Expansion Use it for building-to-building internet, Starlink network extension, warehouse links, garage coverage, farm monitoring, or outdoor surveillance. RJ45 ports make it easier to connect routers, switches, cameras, and other wired devices..

What CPE120 isKuWFi CPE120 is an Outdoor Wireless WiFi Bridge router support 1KM Long Range WiFi Extender with LED display to configure the PTPTMP connection, AP Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTPPTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature -30-55 Storage Temp -40-70. Multiple operation mode, for different network environment Point to PointMulti-Point1-4 for Elevator Monitorsurveillance networks Connect an IP Surveillance Camera to internet bridge CPE120s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras networks DVR. Point to Point Connection for Wireless Coverage Multi-Mode wireless ethernet bridge with ethernet port and LED display Support Wireless AP, Repeater operation mode Support SSID broadcasting, Multi SSID up to 4 Support DHCP server WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge. Tips on product how to use Its LED Display can show operation modechannelsignal strength, its HC switch ctrl the MasterSlave units, no need to access into GUI, press reset 1s will automatic paired avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS. Customer ServiceFor 30 days after the date of purchase, return your undamaged KuWFi line of sight wifi bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.

The EZ-Bridge-LT is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mbsec.. It complies with the 802.11g and n standards to insure interoperability.. The EZ-Bridge-LT creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.. Multiple EZ-Bridge-LT units can be connected in a mesh configuration to allow interconnecting more than two sites..

Built in 9dBi 2x2 dual polarized directional MIMO antenna. Adjustable transmission Power from 0 to 27dBm500mW. Power Consumption 10.5 Watts Max, Note When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. System level optimizations for more than 5km long-range wireless transmission only for paired Point-to-Point or Point-to-MultiPoint transmission. TP Link Pharos tdma Time Division Multiple Access technology improves product Performance in throughput, Capacity and latency Performance. Centralized management system Pharos Control. AP client AP router AP client router WISP operation modes. Passive PoE adapter Suppots up to 60 meter 200 Feet Power over Ethernet deployment and allows the device to be reset remotely. Connectivity technology Wi-Fi Built In.

CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.. 1000Mpbs digital display wireless bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 433Mbpss.. 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability. Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD, supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.. Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM.FCC ID 2A6EJ-CPE450.

CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional. 100Mpbs digital display bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standardsFCC. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. The FCC ID 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions1This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

UeeVii CPE5824 Wireless Bridge CPE features a dual-band wireless link, supporting both 2.4Ghz and 5Ghz network equipment. Compared to single-frequency Wi-Fi bridges,dual-frequency support ensures compatibility with a wider range of devices and provides better stability and anti-interference ability. The Wi-Fi bridge supports fast speeds with 2 1000Mbps ports, reaching a maximum transfer speed of 1200Mbps and network speed of 433Mbps. The 2-Pack Wireless Bridges come pre-paired and are plug-and-play, making it simple to use with point-to-point or point-to-multipoint applications No technical knowledge required. The outdoor Wi-Fi bridge point to point has a 16 dBi directional antenna, the maximum 27dBm can automatically adjust the power to adapt to environmental changes, the transmission distance can reach 5km barrier-free, and the actual application distance should be less than 5KM. This point-to-point internet bridge easily helps you extend the network range to a second building barn, shop, warehouse, garage, or wirelessly extend the IP camera surveillance range. WDS networking mode, video network dual compatibility. IP65-rated weatherproof enclosure for continuous operation in harsh outdoor environments, ideal for outdoor use. Support POE power supply support 24V POE power supply, easy to install and deploy, simplify construction.

5KM3 Miles Long Distance- ULNA Dual Band Gigabit Wireless Bridge provides stable transmission over long distances up to 5KM3.1Miles.Supports DHCP Server, Guest Mode, and broadcast 4 SSID at the same time. Ideal for extending ethernet from the main house to the barn, office, garage, farm etc.. WiFi 5 High Speed- The point to point wireless bridge is equipped with a high gain 4x15dBi antenna and supports 2.4G5.8G dual-band, enjoying Gigabit wireless speeds. Allowing you to upload and download files, stream HD videos, video conferencing, and engage in online gaming faster.. 1200Mbps Lightning-fast Speed- With advanced technology IEEE802.11ac, concurrent bandwidth of the PTP wireless bridge up to 1200Mbps, 300mbsp on 2.4G while 900Mbps on 5.8G. Compatible with major carriers, including Starlink, ATT, Verizon, T-Mobile, Sprint, etc.. Designed for outdoors-WiFi bridge outdoor is made of high quality ABS material, IP65 waterproof, -6KV thunder-resistant, dustproof, cold-proof, and heat-resistant, working temperature is -40C to 75C, ideal for farms, industrial sites, and other challenging locations.. Wireless Security- Wireless bridge point to point outdoor is built with advanced security protocols, including WPA-PSKWPA2-PSKWPAWPA2. Avoid unauthorized access and information leakage. Protect sensitive data and ensure your network security.. Plug and Play- The WiFi bridge point to point outdoor is Plug and Play, pre-configured. You can use it without entering the GUI and monitoring the point to point wireless bridge status from the LED indicator. When you installed the point to point WiFi bridge, make sure they are installed face to face within Horizontal 60Vertical 30, have clear line of sight and no obstruction between them.. What's In The Package- The package comes with anything you need including 1 x master bridge, 2 x slave bridge,3 x POE injector 24V, 3 x 3.3ft network cable, installed accessories..

3pcs Wireless Bridge kit with Two 1Gbs PortsAdalov CPE881 contains 3pcs Wireless bridges,and with 2 x 1000Mbps LAN ports,with 14DBi high gain Antenna offers long range work distance up to 5KM, 5.8G wireless helps it get a higher network speed. Point to point wireless bridge with LED display to configure the PTPPTMP connection, AP and Bridge operation mode. To achieve the CPE function, one needs to act as a transmitters and the others as 2 receivers.. Plug and Play - Point to 2 Points Wireless BridgesPairing by dialing wireless Ethernet bridges.CPE881 PTMP wireless bridges kit is easier to add users in a multipoint connection, instead of creating a series of individual connections. It is also great for extend network, video surveillance, and internet sharing for point to 2 points.. Reliable Wireless Bridge and Save your MoneyWiFi Bridges can be installed on a pole or wall-mounted. Point to multipoint wireless bridges provides a more economical method than laying cable or leasing a private line.Users are not monopolizing channels, but sharing one communication link.It is used to connect CCTV cameras, buildings, sensors, corporate WAN connections, internet access, telecommunication masts, or anything else that requires a data connection.. 5KM Work Distance for Outdoor UsageLong range wireless bridge comes with a 14 dBi directional antenna to expand the range up to 3.1 miles.It is perfect for PtMP or PtP interconnection over long distances.IP65 waterproofdustproof designed for outdoor environments where it can withstand harsh weather conditions.It can easily extend the network range in your house to the garage shop, barn, or video surveillance systems through Wi-Fi bridge signal transmission.. 5.8 Ghz Offers Higher SpeedsThe connectivity operates on 5.8GHz frequencies with high speeds and has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. The transmitter and receiver can talk to each other at up to 866Mbps,and supply LAN DATA RATE up tp 500Mbps,which is deal for voice and video transmission with low latency.The Better the aim,the better the throughput..

3pcs Wireless Bridge kitAdalov CPE369 contains 3pcs Wireless bridges,and with 100Mbps and 1000Mbps ports,with 16DBi high gain Antenna offers long range work distance up to 3KM, 5.8G wireless helps it get a higher network speed. Point to point wireless bridge with LED display to configure the PTPPTMP connection, AP and Bridge operation mode. To achieve the CPE function, one needs to act as a transmitters and the others as 2 receivers.. Plug and Play - Point to 2 Points Wireless BridgesPairing by dialing wireless Ethernet bridges.CPE369 PTMP wireless bridge kit is easier to add users in a multipoint connection, instead of creating a series of individual connections. It is also great for extend network, video surveillance, and internet sharing for point to 2 points.. Easy to InstallWiFi Bridges can be installed on a pole or wall-mounted. It is used to connect CCTV cameras, buildings, sensors, corporate WAN connections, internet access, telecommunication masts, or anything else that requires a data connection.. 3KM Long-range Work DistanceLong range wireless bridge comes with a 16 dBi directional antenna to expand the range up to 1.9 miles.It is perfect for PtMP or PtP interconnection over long distances.It can easily extend the network range in your house to the garage shop, barn, or video surveillance systems through Wi-Fi bridge signal transmission.. 5.8 Ghz Offers Higher SpeedsThe connectivity operates on 5.8GHz frequencies with high speeds and has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. The transmitter and receiver can talk to each other at up to 900Mbps,and supply LAN DATA RATE up tp 433Mbps,which is deal for voice and video transmission with low latency.. Great for Outdoor Usage IP65 waterproofdustproof designed for outdoor environments where it can withstand harsh weather conditions.Whether it is sunlight, frost, rain, humidity, or hail, CPE369 outdoor wireless bridge can handle it all.It supports 24V POE power2 POE adapters included,making network design and deployment even more manageable.So it can be installed in areas where power outlets are not readily available.Eliminating the mess of altering existing network infrastructure.. SecurityCPE369 Wireless bridge security WEP64128bits,WPA,WPA2,802.1x . It is also important to establish secure connections to avoid any network risks.. Reliable Wireless Bridge and Save your MoneyPoint to multipoint wireless bridges provides a more economical method than laying cable or leasing a private line.Users are not monopolizing channels, but sharing one communication link, which makes the connection more reliable.ensure fast and efficient data transfer in a remote location and to make sure that all networked devices follow the same rules of data sharing and access.. All in One Package3pcs CPE369 Wireless bridge kit3 x CPE369 Wireless Bridges3 x POE Adapters3 x Metal Cable Ties3 x Network Cables1 x User Manual..

Enjoy True WiFi 6 SpeedThe next generation of WiFi, complies with IEEE 802.11 acabgn standards.Supports dual-band maximum speed up to 5GHz 1201Mbps and 2.4GHz 574Mbps, avoiding wireless interference congestion and offering lightning-fast Internet speed. you can enjoy HD videos, smooth gaming, etc. even outdoors.. Multiple Modes, Flexible UseYou can install it anywhere you want,Place as you like,Equipped with IP67 waterproof enclosure, 15kV ESD protection and 6kV lightning protection, it can work normally in rainsnowwindthunder and other bad weather. Supports Mesh, AP, Router, Repeater, APRepeater and other modes to meet your different needs and apply to more outdoor use scenarios.. Seamless WiFi RoamingThe 4x8dBi Fiberglass tube high-gain antennasomnidirectional antennas and two built-in high-power amplifiers provide extreme WiFi coverage and penetration,greatly expanding the WiFi coverage, and eliminating every network dead zone.design for more strong penetration longer range coverage, ideal for providing Wi-Fi service in big area such as Home,Camping,Factory, Community, Street.. Optional PoE Power SupplySupports 802.3AFAT active PoE and passive PoE, transferring data and charging the product with a single Ethernet cable, so you can install the product outdoors where power outlet is not available,Give you more choice of installation locations. Note The PoE converter is not waterproof. Please use CAT5E or above cable and the length should not exceed 100m328ft.. About After SalesNotePlease feel free to contact us in the buyer communication if you have any question, We will provide solutions within 8 h,12-month worry free warrantyextra 6 months for registered members and life-long technical support.Note If you need to use special characters, please search for 573HX1 in Firmware on the Wavlink website to upgrade the latest firmware..

NEXT-GEN WIFI 6 WIRELESS BRIDGE Equipped with the latest WiFi 6 technology, ULNA CPE806S wireless bridge point to point outdoor offers improved efficiency, capacity, and reduced latency for seamless long-range connections and real-time data transmission. 5KM STABLE WIRELESS TRANSMISSION Built with 5x 16dBi directional antennas, this long range wireless bridge enables up to 5KM point-to-point connectivity. Ideal for expanding networks across buildings, ranch, or large outdoor properties with reliable signal strength. 2.5GBPS 1GBPS DUAL ETHERNET PORTS Designed with a 2.5Gbps high-speed LAN and 1Gbps LAN port, this gigabit wireless bridge ensures seamless 4K streaming, IP camera video feed, and fast file sharing, perfect for data-heavy applications or monitoring environments. DUAL BAND WIFI ACCESS ON BOTH ENDS Each CPE806S wireless bridge unit supports 2.4GHz and 5.8GHz WiFi dual-band access for flexible local wireless access, allowing multiple users or cameras to connect directly at both transmitter and receiver ends, no extra router required on the receiver side. TWO POWER OPTIONS ULNA CPE806S wifi bridge point to point outdoor supports 24V passive POE and 12V1A DC solar panel input for flexible power setup in outdoor environments. A perfect choice for off-grid farms, construction sites, or mobile deployments. Note Not compatible with 48V POE switches or 48V adapters. HASSLE-FREE PLUG PLAY SETUP Pre-configured from the factory, this wireless ethernet bridge pairs instantly on power-up, no need for tech knowledge perfect for first-time users, get your wireless network running in minutes. POINT-TO-POINT POINT-TO-MULTIPOINT READY Designed for network expansion across buildings or IP camera backhaul, this wireless internet bridge supports both point-to-point and point-to-multipoint transmission modes, ideal for security systems, warehouses, cabins, or campuses. SUITABLE FOR OUTDOOR USE Built to last in harsh environments with IP65-rated waterproof housing, this outdoor wifi bridge comes with mounting brackets for easy rooftop or pole installation. WHAT'S IN THE BOX Our wireless bridge kit includes 2 CPE806S units, 2 24V POE adapters, 2 brackets, metal straps, 23ft test Ethernet cables, and full hardware kiteverything you need for a fast and stable wireless setup.

1 km Long Range Connection The outdoor wireless bridge provides stable signal transmission up to 1 kilometer in line-of-sight. It extends the network between buildings, from your house to a shop, barn, garage, shed, farm, RV, or any outdoor structure. High-Speed Connectivity The WiFi bridge kit includes two pieces, with one working as an AP Transmitter and the other as a Station Receiver, enabling wireless data transmission at speeds of up to 867Mbps on the 5GHz band. 802.11ac WiFi standard ensures fast data transfer. Point-to-Point PtP Connection Connect the 10100 Mbps RJ45 Ethernet port of the WiFi bridge to another WiFi router and instantly extend your network. Enjoy fast WiFi in your workshop, office, or guest house. . Plug-and-Play This point to point wireless bridge is pre-paired for instant setup out of the box. Simply power the AP Transmitter and Station Receiver in the same room for automatic pairing in minutes. Supports power supply via included Passive PoE or DC power adapter. All-Weather Durability The WiFi bridge point to point outdoor is designed to withstand all weather conditions with IP65 weatherproof resistance and 6KV lightning protection. Supports wall-mounted and pole-mounted installation. Note PoE injectors are intended for indoor use only.

5 km Long Range Connection The outdoor WiFi bridge provides stable WiFi transmission up to 5 kilometers, with a clear line of sight. Extend your network between buildings such as house, barn, garage, shed, shop and farm connect RVs, campgrounds, and remote locations and share Internet with family and neighbors, also works with Starlink. Fast WiFi and Dual Gigabit Ethernet Ports The WiFi bridge has one unit as an AP Transmitter and the other as a Station Receiver, delivering 867 Mbps on 5 GHz. Each unit comes with two 1000 Mbps LAN ports, ideal for seamless streaming, efficient workflows, and more. Point-to-Point PtP Connection Connect the 1001000 Mbps LAN port of the WiFi bridge to another WiFi router for instant network extension. Powered via the included Passive PoE injector, 802.3af PoE switch, or DC adapter, it ensures flexible deployment and seamless connectivity. Plug-and-Play The WiFi bridge comes pre-paired for a hassle-free setup. Simply power the AP and Station in the same room for automatic pairing in minutes. Supports both wall and pole-mounted installations for flexible deployment. Outdoor Design for Any Weather The WiFi bridge features IP65-rated enclosure with waterproof, dustproof, and 6kV lightning protection to withstand harsh weather conditions. Note PoE injectors are intended for indoor use only. For outdoor installations, we recommend using Cat5e or higher Ethernet cables that are shielded, UV-resistant, waterproof, and PoE-compatible. Installation Requirement For optimal performance, a clear line of sight between the two CPEs is required. Obstacles like trees, buildings, and large steel structures can block the wireless signal.

Network Expansion Dual WiFi Broadcasting The upgraded Adalov CPE661 point to point wireless bridge outdoor allows both transmitter and receiver to broadcast WiFi signals directly. Phones, tablets, smart TVs, and outdoor wireless cameras connect without an extra router. It extends networks up to 3km 1.9 miles while both bridges broadcast WiFi, instantly turning barns, garages, workshops, or campsites into reliable high-speed internet hotspots.. Gigabit Connectivity for Devices Streaming Equipped with dual ports 100Mbps and 1001000Mbps, the CPE661 point to point WiFi bridge delivers blazing speeds for gaming, 4K streaming, fast file transfers, and network expansion. Transmitter and receiver communicate up to 900Mbps with LAN rates up to 433Mbps. The receiver connects wired or wirelessly to phones, tablets, smart TVs, and wireless cameras, extending internet as a reliable wifi to ethernet bridge or wireless bridge router. Expand and Share Wireless Networks AnywhereWith powerful 16dBi high-gain antennas, the CPE661 point to point wifi solution delivers stable coverage up to 3KM without costly trenching or wiring. Perfect for extending Network or Compatible with Starlink to barns, garages, or outbuildings, it also supports connecting IP cameras, sharing internet with neighbors or extra buildings, and reducing network costs. Reliable Compatible with Starlink wifi extender and the long range wifi extender for outbuilding.. Outdoor-Ready Mounting Easy AlignmentThe wireless bridge point to point outdoor includes adjustable wall and pole mounting options with 60 horizontal and 30 vertical alignment. This ensures accurate face-to-face signal setup for optimal performance. Whether installed as a WiFi bridge with Ethernet port or outdoor WiFi extender, it comes with mounting brackets, cable clips, and wall plugs for secure installation.. Flexible Power Options with PoE SupportSupporting 2448V PoE, the CPE661 WiFi ethernet bridge offers versatile installation for outdoor and remote locations. LAN1 can be powered with the included 24V adapter, while LAN2 receives power through a compatible PoE switch, allowing unified PoE setup for multiple devices. Ideal for surveillance cameras, barns, warehouses, or remote buildings, it simplifies wiring and ensures stable, long-distance network operation as a reliable wireless bridge.. Plug-and-Play Setup No Tech Skills RequiredPre-configured for out-of-box use, the CPE661 wireless bridge router is easy to install. Simply connect, power with PoE, select a channel, and youre ready to go. No technical expertise required. Use it as a WiFi to Ethernet bridge for cabins, offices, or camping trips. Its the ideal computer networking wireless access point for effortless outdoor WiFi solutions.. Weatherproof IP65 Outdoor Network BridgeBuilt to withstand outdoor environments, the CPE661 point to point wireless bridge features IP65-rated protection against rain, dust, and temperature extremes. Ideal for extending or sharing internet to barns, farms, shops, garages, hotel, factories, or outbuildings, it delivers stable, reliable network performance in harsh weather, making it perfect for long-range outdoor connectivity and building-to-building network expansion.. Versatile PtP and PtMP NetworkingThe CPE661 outdoor WiFi extender long range supports Point-to-Point PtP and Point-to-Multipoint PtMP modes, making it perfect for multiple applications. Share high-speed internet with neighbors to save costs, or extend WiFi for IP cameras, elevators, and garages. This versatile WiFi bridge point to point outdoor is also a reliable wireless access point for flexible networking.. Reliable 5.8GHz Wireless Connectivity Operating on the 5.8GHz frequency band, the CPE661 gigabit wireless bridge ensures faster speeds, low latency, and resistance to interference. Designed for outdoor WiFi needs, this point to point WiFi solution is ideal for extending networks to guest houses, sheds, and farms. Enjoy seamless streaming, gaming, or work-from-home stability with this dependable wireless ethernet bridge system.. Complete Wireless Bridge Kit IncludedThe Adalov CPE661 wireless bridge kit comes fully equipped with everything you need 2 wireless bridges, 2 PoE adapters, 2 mounting brackets, 2 small ties, 4 large ties, network cables, wall plugs, and clips. Designed as a ready-to-install solution, this WiFi Bridge extender for outbuildings works seamlessly as a wireless ethernet bridge, ensuring stable outdoor WiFi coverage..

Outdoor AC1200 Gigabit Dual Band Access Point with MU-MIMO. Designed with the latest 802.11ac Wave 2 technology, Cudy AP1300 can reliably delivers dual band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz to multiple devices simultaneously. Designed with one gigabit ethernet port, AP1300-Outdoor can delivers up to 1000Mbps ethernet speed to wired devices.. 5-IN-1 Multifunctional Wireless Access Point. AP1300 outdoor is not only an outdoor wireless access point, it can also work as an outdoor WiFi Extender, Gigabit Outdoor WiFi Router, Gigabit Outdoor WISP Router or Gigabit Mesh Router. You can configure the operating mode to meet your requirement.. RP-SMA interface and detachable WiFi antennas. 2 external 5dBi WiFi antennas enhance the sensitivity of the router and improve the signal quality of WiFi. At the same time, the WiFi antenna is a detachable design. If you want to use other high gain outdoor antennas, the RP-SMA connector also provides the possibility of an external cellular antenna.. IP65 rated waterproof housing and 4KV lightning protection design, suitable for outdoor use. Pole or wall mount for easy installation in your yard, shop, farm or RV.. Multiple Power Options for Easy Installation. AP1300 Outdoor supports 802.3ataf PoE or 2450V passive power supply adapter included , can be either powered by a PoE switch or PoE Injector adapter, making deployment effortless and flexible..

Wi-Fi 6 Speeds up to 1,200 MbpsEnhanced with Wi-Fi 6 technology enables speed of up to 1,200 Mbps in the 5-GHz frequency range.. Stable and reliable connectivityImproved signal reception and reliability for clients through beamforming technology.. More power than all the restWi-Fi 6 enables Simultaneous 4K video streaming up to 20 devices or 1080p 30fps camera streaming up to 200 devises.. Efficient Outdoor Performance2x2 directional antennas provides superior outdoor Wi-Fi performance and efficiency.. Extended Wi-Fi CoverageExtended Wi-Fi coverage up to the yard or between buildings with a high transmit power of 26 dBm.. Up to 5 miles point-to-point extensionWireless network extension of up to 5 miles point-to-point with a high gain 16 dBi integrated directional antenna.. IP55 housingWeatherproof and dustproof IP55-rated housing for durability.. User-friendly appEasy configuration and monitoring through a user-friendly EnWiFi app.. Multiple operation modes availableMultiple operation modes supported Access Point, Client Bridge, WDS Access Point, WDS Station. Flexible Power optionsFlexible power options available with the Gigabit Ethernet PoE port. PoE Injector included.

Wave 2 MU-MIMO Improves Performance Expands User Capacities. IP67-Rated Waterproof Dustproof Housing Withstands Harsh Environments. 11ac Dual-Radio Speeds to 867 Mbps on 5 GHz to 400 Mbps on 2.4 GHz. Beamforming Optimizes Antenna Signal, Reception Reliability. Four 4 External 5dbi High-Gain, 360 SMA-Type Antennas. Band Steering Optimizes Network Traffic Flow Fast Roaming Secures Seamless Connections. Flexible Operation Modes AP, Client Bridge or WDS. Quickly View, Monitor Reconfigure APs Locally or Remotely with EZ ControllerTM Software.

For Starlink Optimal Network Extension Extend the reach of your internet receiver with our high-performance wireless bridge, it is ideal for connecting remote outbuildings, barns, and secondary structures to your main with Starlink receiver. 5G Gigabit Wireless Bridge The CPE850 is a 5G outdoor CPE designed for long-range WiFi extension, it supports lightning-fast data transfer rates of up to 1200Mbps between bridges, and the maximum achievable network speed is 450Mbps. Easy to Use This outdoor wireless bridge comes pre-paired at the factory, pairing can be initiated effortlessly through a code dialing process, eliminating the need for GUI access, moreover, it automatically re-pairs after power restoration. 5KM Wide Range Featuring a built-in 16dBm directional antenna with a transmission distance of up to 5 kilometers barrier-free. With automatic power adjustment up to 27dBm, it adapts to environmental changes effectively. Network and Surveillance Expansion This point-to-point internet bridge facilitates seamless network extension to secondary buildings like barns, shops, garages, or warehouses, as well as wireless expansion of IP camera surveillance ranges. POE Power Supply Support for 24V POE power supply, installation, and deployment of the UeeVii wireless bridge is a breeze, simplifying construction processes, and ensuring smooth wireless video guaranteeing high-speed and uninterrupted surveillance.

What KuWFi CPE200 isan 11AC 5GHz 900Mbps wireless bridge point to point outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 2KM and with LED display to configure the PTPTMP connection, more stable Support AP and bridge operation mode, simple to built the PTPPTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature -30-55 Storage Temp -40-70. Multiple operation mode,suit for different network environment Connect an IP Surveillance Camera to CPE200s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200 gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR. Point to Point Connection for Wireless Coverage Multi-Mode wireless wifi bridge with ethernet port and LED display Support Wireless AP, Repeater operation mode Support SSID broadcasting, Multi SSID up to 4 Support DHCP server WiFi coverage before 2 houses with 2KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable. Tips on product how to use Its LED Display can show operation modechannelsignal strength, its HC switch ctrl the MasterSlave units, no need to access into GUI, press reset 1s will automatic paired avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS. Customer ServiceFor 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.

Extended Starlink WiFi This point-to-point wireless bridge with bracket mount is specifically designed to seamlessly integrate with Starlink's Gen 2 Ethernet Adapter, Gen 3 routers, and Mini LAN Port, ensuring a reliable and stable network connection with your Starlink satellite internet system. It is ideal for effortlessly connecting remote buildings, barns, shops, farms, garages, warehouses, or security cameras, providing a versatile solution for extending your network coverage.. Extended Network WiFi Connect the master bridge to your primary router with internet access. Then, connect the slave bridge to the secondary WiFi router where you want to extend the network - such as a neighbor's house, store, barn, or garage. This point-to-point configuration allows you to extend your network efficiently and cost-effectively. Additionally, the network relay function can be achieved using two pairs of wireless bridges, enabling seamless coverage over longer distances.. Extended-Range Surveillance System Features a highly optimized deep protocol for wireless video transmission, ensuring high-speed, smooth, and reliable surveillance. The underlying wireless driver is specially engineered for enhanced anti-interference capabilities and superior stability. Supports both point-to-point and point-to-multipoint connections, allowing expanded monitoring coverage to effectively safeguard your property.. Plug and Play This outdoor point-to-point wireless bridge kit includes two compact bridges with lightweight mounting brackets for easy installation on poles or walls. Factory pre-configured for seamless setup - you simply connect your devices to the master and slave bridges, provide power, and you're ready to go.. Wireless Bridge with Dual Adjustable Mount Brackets The CPE556 Wireless Bridge features two versatile pole mounting bracket kits, facilitating easy installation on walls or poles. These adjustable brackets allow for precise positioning to optimize signal strength, making them ideal for outdoor network extension deployments and point-to-point wireless bridge setups in various environments.. 100Mbps Network Speed The connection between two Ethernet bridges can support speeds up to 300 Mbps. The outdoor WiFi bridge features two built-in RJ45 ports supporting 10100 Mbps, actual providing wireless speeds of up to 100Mbps. Simply connect an access point or router to the slave bridge to broadcast WiFi and establish a reliable wireless network.. Easy to Pair The CPE556 WiFi bridge with mounting brackets features a straightforward plug-and-play design. The dial pairing method allows you to easily connect the master and slave bridges by pressing the A-B buttons. Simply set both bridges to the same number and press the RST button to complete the pairing process.. 1.9 Miles Long-Distance Wireless Transmission Equipped with automatic power adjustment to adapt to environmental changes, ensuring seamless video quality even at very close distances. Capable of reaching up to 1.9 miles in unobstructed, line-of-sight conditions. For optimal performance, deploy the wireless bridge face-to-face with a clear line of sight, and keep actual application distances below 1.9 miles without any obstructions.. High-Performance 5.8ghz Ethernet Bridge The CPE556 Wireless Bridge operates at 5.8GHz, providing high-performance, long-range building-to-building connectivity. Its digital tube display enables simple point-to-point pairing by dialing, eliminating complex GUI setup and saving time and costs. Designed for reliable data transmission, it ensures seamless coverage and easy wireless monitoring. Supporting dynamic MIMO Power Saving Mode DMPS and Automatic Power-Saving Transmission APSD, it offers enhanced energy efficiency. Compatible with 24V to 48V PoE power supply, the CPE556 is easy to install and deploy, streamlining construction while ensuring network safety and reliability..

Long-Range Network Extension for Outdoor Use Designed for long-distance point-to-point transmission, this wireless bridge helps extend internet coverage to barns, workshops, garages, warehouses, farms, and other remote outdoor areas. In open line-of-sight conditions, it supports transmission distances of up to 3KM. Compatible with Starlink Gen 2 and Gen 3 Setups Built for compatibility with Starlink Gen 2 Ethernet Adapter and Starlink Gen 3 Router setups, this outdoor wireless bridge helps expand network reach where direct cable runs are difficult or inconvenient. Ideal for users who need more flexible installation options. Stable 5.8GHz Signal with 18dBi High Gain Antenna Operating on the 5.8GHz band, the bridge is designed to reduce interference and support a more stable outdoor connection. The 18dBi high gain antenna helps improve signal transmission and reception across longer distances. Easy Installation with 24V PoE and Mounting Bracket The included 24V PoE injector simplifies setup by carrying power and data through a single Ethernet cable. A mounting bracket is included for convenient outdoor installation, helping reduce wiring complexity and save setup time. uilt for Outdoor Conditions With an IP65 waterproof housing, this wireless bridge is designed for outdoor environments such as rooftops, yards, poles, and exterior walls. It is made for reliable day-to-day use in changing weather conditions. Actual performance may vary based on distance, obstacles, and interference..

Long-Range Starlink WiFi Extender The CPE560 is a 5.8GHz outdoor wireless bridge designed for extending Starlink internet access up to 3 kilometers, providing a simple and professional solution for long-range wireless coverage without complex wiring setups.. High-Speed Data Transmission With speeds of up to 100Mbps, this starlink WiFi extender ensures smooth and fast data transfer for activities like downloading large files, streaming HD videos, and online gaming, enhancing work and entertainment efficiency.. Enhanced Transmission Distance Featuring a built-in 14dBi directional antenna, this wireless bridge point to point outdoor offers reliable transmission performance up to 3km, making it ideal for locations like warehouses or garages near your home, with trees not affecting signal speed.. Stable 5.8GHz WiFi Band Operating on the stable 5.8GHz frequency band, this point to point wireless bridge for Starlink WiFi Extension maintains a reliable network connection even in challenging environments with high interference levels or adverse weather conditions, ensuring consistent speeds for home or commercial use.. Starlink Compatibility Compatible with Starlink's Gen 2 Ethernet adapter and Gen 3 routers, this wireless bridge point-to-point seamlessly integrates with the Starlink satellite internet system, providing reliable network connections regardless of device generation.. Solar Panel Power Supply IP65 Waterproof Rating Supporting solar panel power supply and featuring an IP65 waterproof rating, this ethernet wireless bridge ensures durability in harsh weather conditions, making it suitable for outdoor use without a power supply.. Weatherproof Design With a weatherproof and durable construction, this wireless bridge access point can withstand extreme outdoor conditions, making it ideal for agriculture and industrial parks, ensuring enduring and reliable network connections.. 24V PoE Injector The included PoE injector simplifies installation by combining power and data transmission over a single Ethernet cable, ensuring efficient power delivery to the network bridge and minimizing the need for additional power sources.. Dual RJ45 LAN Ports Featuring two RJ45 LAN ports, this point to point wireless bridge outdoor offers enhanced connectivity options for connecting additional devices directly to the bridge, facilitating the creation of local area networks or seamless data sharing within a networked environment.. Plug and Play Installation The Plug and Play feature streamlines installation with an intuitive design, catering to users of all proficiency levels, ensuring effortless deployment and seamless integration into existing networks for swift connectivity expansion..

Comprehensive Wireless Bridge Kit Includes two 5.8G wireless bridges, adjustable installation brackets, and a high-speed WiFi 6 AX3000 dual-band router an all-in-one solution for network extension and WiFi broadcasting. 5KM Point-to-Point Transmission Wireless bridges support long-distance transmission up to 5 kilometers, ensuring stable data transfer for surveillance systems, remote offices, or outbuildings. Dual Gigabit Ethernet Ports Both wireless bridges come equipped with dual Gigabit RJ45 ports, offering fast wired connections for devices that require reliable high-speed internet access. 48V PoE Power Supply The wireless bridges support 48V Power over Ethernet PoE, providing both power and data transmission through a single cable, simplifying the installation process. Adjustable Mounting Brackets The included installation brackets allow for both pole and wall-mounted setups, featuring angle adjustment for optimal alignment and easier setup. Seamless WiFi 6 AX3000 Router The WiFi 6 router provides ultra-fast speeds up to 3000Mbps, with dual-band frequencies 2.4GHz and 5GHz, perfect for delivering stable WiFi to remote areas via the bridge system. Expand Your Network Effortlessly Ideal for extending your home or business network to remote locations such as barns, workshops, garages, and other outdoor buildings. Weather-Resistant Design Built to withstand outdoor environments, the wireless bridges feature IP66 weatherproofing, making them resistant to rain, dust, and extreme temperatures. Plug Play Setup Pre-configured for easy installation, no advanced networking knowledge requiredsimply mount, connect, and enjoy stable network coverage. Compatible with Multiple Devices Works seamlessly with various networking devices including surveillance cameras, smart home devices, and office systems, providing a reliable long-range connection.

Expert Pre-Configuring Applied to a set of two airMAX NanoStation 5AC Loco Devices to work as a Point-to-Point Wireless Bridge.. Bundle Includes Configuration Applied, 2 Paired airMAX NanoStation 5AC Loco Ubiquiti, 2 POE Injectors with Power Cords, 2 Straps, Installation Guide.. Meticulously optimized by our team of experts for unparalleled performance.. Do Not Reset the Devices to Factory Setting, this will result in the lost of the Configuring Applied.. Create a seamless and high-speed point-to-point wireless connection effortlessly..

Expert Pre-Configured Bundle A set of two NanoStation Loco M5 devices, meticulously optimized by our team of experts to function as a Point-to-Point Wireless Bridge.. Bundle Includes Configuration Applied, 2 Paired NanoStation Loco M5 Ubiquiti, 2 POE Injectors with Power Cords, 2 Straps, Installation Guide.. Robust Performance Experience unparalleled performance with the expert pre-configured NanoStation Loco M5 bundle.. Maintain Configuration Important Do not reset the devices to factory settings as this will result in the loss of the applied configuration.. Seamless High-Speed Connection Create a reliable and high-speed point-to-point wireless connection effortlessly..

?- Features 11AC technology with a maximum wireless rate of 867Mbps, ensuring fast and reliable wireless connections for demanding applications. ?- ? Equipped with a 12dBi directional antenna and internal power amplifier, providing stable wireless connectivity over distances up to 5km. - ? Utilizes Tenda's proprietary TDMA protocol to enhance performance and capacity in PtP and PtMP outdoor network scenarios. -? ? Simplifies setup by automatically connecting devices out of the box, making it perfect for users with limited network expertise, especially in CCTV installations. ? Built with an IP65 waterproof enclosure and durable hardware, ensuring reliable performance in harsh weather conditions, including extreme temperatures.. Supports both 12V 1A Passive PoE and 12V 1A DC input, enabling versatile and convenient deployment in various environments. ? Includes PC-based CPE Assistant software, allowing easy configuration and management of multiple devices within a network. - Backed by Tenda's 3-year warranty, the OS3 also comes with lifetime dedicated technical support. Reach out via phone or email for assistance anytime.

Tri-Band Six-Stream Outdoor WiFi 7 Up to 9.3 Gbps.. 6 GHz Band Unlocked by AFC AFC enables 6 GHz band outdoor uses.. True Tri-Band Omnidirectional Coverage 300m2 3,200ft2 recommended coverage. Professional Hardware Design Industry-Leading IP68-Rated, 1 2.5G PoE port, 2.4 GHz dual-polarized antennas. Easy and Quick Setup Wallpole mounting Omada SDN for one-click setup.

- ? Managable over TP-Link OMADA cloud platform. Enjoy the uniform network management experience everywhere in one system, including CPE, Access Point, Network Switch, Gateway. -? Save significant deploying time and effort by auto-pairing and agile LEDs. , Up to 867 Mbps on the 5 GHz wireless data transfer rate. ? ? Utilize 5GHz, Ideal for long-range wireless transmission up to 0.6 mile, 1km. ? 3 1000M ports to provide more possiblity for your flexible connection options. IP65 weatherproof enclosure and 6kV lightning protection ensure all-weather suitability. Powered by PoE or DC adapters, it's up to you how to power it up. PoE Adapter included.

- ? Managable over TP-Link OMADA cloud platform. Enjoy the uniform network management experience everywhere in one system, including CPE, Access Point, Network Switch, Gateway. -? Save significant deploying time and effort by auto-pairing and agile LEDs. , Up to 867 Mbps on the 5 GHz wireless data transfer rate. ? ? Utilize 5GHz, Ideal for long-range wireless transmission up to 3 miles, 5km. ? 3 1000M ports to provide more possiblity for your flexible connection options. IP65 weatherproof enclosure and 6kV lightning protection ensure all-weather suitability. Powered by PoE or DC adapters, it's up to you how to power it up. PoE Adapter included.

POINT TO POINT BRIDGE2 10 dBi Outdoor PoE Access Points with wireless N300 point-to-point networking 2.4 GHz. NDAA TAA COMPLIANT This National Defense Authorization Act NDAA compliant switch abides by the guidelines that prohibits equipment or components from certain Chinese companies and their subsidiaries. TAA compliant in accordance to the Trade Agreements Act 19 U.S.C. 2501-2581. MANUFACTURER PROTECTION We stand by the quality of our products.The TEW-740APBO2K 10dBi Wireless N300 Outdoor PoE Pre-configured Point-to-Point Bridge Bundle Kit is backed and supported with 3 years of TRENDnet Manufacturer Protection.. RELIABLE TECH SUPPORT Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers.. PRECONFIGURED KIT 2 x Preconfigured Wireless N access points. Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit. POE POWER ADAPTER Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 60 m 197 ft.. WIRELESS N300 2.4 GHz The N300 Oudoor access point kit is compliant with 802.11bgn technology 2.4 GHz with data rates up to 300 Mbps. WIRELESS MODES Supports Access Point AP, Wireless Distribution System WDS, Client Bridge AP, Wireless ISP WISP AP, CPE AP, and control AP CAP modes. OUTDOOR READY The PoE Access Point has a durable enclosure with an IPX6 outdoor weather rating. Operating Temperature of -20 - 60 C -4 - 140 F.. DIRECTIONAL ANTENNA The 10 dBi Access Point has a built-in 10 dBi directional antenna.

NSM5 2-Pack NanoStation M5. Voltage 48 Volt.

Operation mode AP, Client, WDS Frequence 5,4 - 5.825 GHz. DHCP yes Transmission speed 300 Mbps. Standards 802.11an Chipset Atheros. TX Power regulation yes Max.output power 27 dBm. Sensitivity -96 dBm Modulation OFD.

Enhanced Dual 1000Mbps Ports The 2.4G 5.8G Wi-Fi wireless bridge provides reliable connections with dual 1001000Mbps RJ45 ports, offering data transfer speeds of up to 1000Mbps between P2P POE wireless bridge, perfect for stable WiFi network extension. All in One Network Expansion Solution This kit combines dual-band wireless bridge and WR3000K WiFi 6 router in one cost-effective solution, letting you expand networks to barns, shops, or remote areas without pricey cabling. Effortless Setup, Limitless Connectivity Say goodbye to complex configurations Our wireless bridge offers a plug-and-play experience, allowing you to establish a point-to-point connection in seconds. No technical expertise requiredsimply connect the devices, and you're ready to go. it also supports point-to-multipoint setups, giving you the flexibility to expand your network and connect multiple locations or devices with ease. For Starlink Signal Extension Specialist Specifically designed for Starlink V2V3 compatible kit connect the master bridge to your router, then boost signals to areas like barns, garages, or rural stores. Maximize for Starlinks coverage while eliminating costly wired installations. 5KM Long Range with 14dBi High-Gain Antenna This high-gain antenna focuses the signal for maximum efficiency, ensuring a strong, stable connection with the outdoor Wi-Fi extender even over vast distances. Built to Withstand the Elements Our wireless bridge features an IP65-rated design, providing robust protection against dust, rain, and extreme temperatures. Whether it's scorching heat, freezing cold, or heavy downpours, this bridge is engineered to perform reliably outdoors. Note that the router in this kit is not waterproof unlike the IP65-rated wireless bridge and must be used indoors.. 2 Installation Options The UeeVii PTMP wireless Ethernet bridge comes with hoops that support pole and wall mounting. Select the method that fits your needs for easy installation at height or on walls, enhancing your network's convenience and flexibility. Weather-Resistant Design The wireless bridge point to point outdoor IP65-rated weatherproof casing ensures reliable operation in harsh outdoor environments, with protection against rain, dust, and freezing conditions. Plug and Play Simplicity The pre-configured ethernet bridge point to point is ready to use out of the box. If reconfiguration is needed, easily pair them with a simple dial, ensuring hassle-free installation.

2 installation methods This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you. 150-degree adjustment The rod of the wireless bridge bracket mount can be adjusted up and down by 150. After you install the CPE, adjust the angle of the rod to receive signals of different strengths. Firmness The wireless bridge pole mount is designed with non-slip gears. After adjusting the angle of the rod, only need to twist it lightly, and the rod will be firmly fixed. This pole mount is equipped with 2 hoops to firmly fix the mount on the rod. Waterproof The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which gives this bracket mount a good waterproof performance. Its very suitable for outdoor use. Wide application This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most wireless bridges on the market, some APs can also use it.

3-IN-1 WIRELESS BRIDGE KIT All-in-One Solution for Long-Range Local Coverage.The CPE452 outdoor wifi bridge establishes a robust point-to-point link over distances of up to 3KM, while the AX3000 Wi-Fi 6 router transforms it into powerful. Complete with adjustable mounts for easy installation, it's the ideal solution for connecting separate buildings and eliminating coverage dead zones.. DUAL 100Mbps ETHERNET PORTS Equipped with two 10100Mbps RJ45 ports, this 5.8G outdoor wireless bridge ensures reliable wired connectivity. Meanwhile, its point-to-point wireless transmission speed reaches up to 300Mbps, well-suited for bandwidth-demanding applications like HD video surveillance and network extension.. 3KM POINT TO POINT TRANSMISSION The point to point wireless bridge features a built-in 14dBi high-gain directional antenna, enabling unobstructed transmission up to 3KM to ensure stable data transfer for surveillance systems, remote offices, or auxiliary buildings. WiFi bridges are installed face-to-face as much as possible, with a clear line of sight and no obstructions. DUAL BAND AX3000 WiFi ROUTER Equipped with WiFi 6 and a 6-antenna design, this gigabit router enhances signal coverage and data efficiency The high-speed router supports 2.4G and 5.8G dual-band for stable, smooth connections anywhere in your home.. 2 INSTALLATION OPTIONS of ADJUSTABLE MOUNTING BRACKETS This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs. Adjustable angles facilitate precise alignment and rapid deployment, enhancing the convenience and flexibility of network usage.. EXPAND NETWORK WiFi EFFORTLESSLY Extend your network to an old house, barn, farm, shop, or garage by wifi bridge point to point outdoor,work with starlink Good for extending your home or business network to remote locations and outbuildings.. EXTENDED SURVEILLANCE RANGE Connect IP cameras wirelessly for lane, yard, warehouse, farm, and house monitoring without wiring and buried wires, saving manpower and material resources.. 24V PoE POWER SUPPLY The wireless bridge adopts a PoE power supply, which is easy to install and manage while saving costs. This upgraded p2p wireless bridge provides more flexibility and reliability for your power supply.. DURABLE OUTDOOR DESIGN Wireless ethernet bridge built to withstand outdoor environments, IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, with rain, dust, and antifreeze characteristics.. PLUG PLAY The pre-configured wireless bridge point to point outdoor is almost plug-and-play functionalitysimply plug devices out of the box to get started. For reconfiguration, easily pair the master and slave bridges by switching the DIP switches and pressing the A-B button, ensuring hassle-free installation..

Extend Your WiFi Further with High Power Dual BandBlast through dead zones with supercharged WiFi coverage Featuring two 7dBi high-gain antennas and powerful 1000mW output, this extender delivers combined speeds up to 600Mbps 450Mbps on 5GHz 150Mbps on 2.4GHz. Perfect for smooth streaming, smart cameras, and reliable connectivity in gardens, pools, farms, and outdoor gatherings.. Flexible Power over Ethernet PoE SetupSimplify installation in hard-to-reach spots using just one cable for both power and data. Supports passive PoE included and standard 802.3ataf active PoEuse your own compatible switch for even more flexibility. Ideal for locations without power outlets.. Built Tough with IP67 Weatherproof ProtectionEngineered to withstand the elements, this extender operates reliably in extreme temperatures from -10C to 50C and resists moisture, dust, 15KV ESD, and 6KV lightning strikes. Its rugged IP67-rated enclosure guarantees year-round performance, rain or shine.. 4-in-1 Smart Operation ModesSwitch effortlessly between Repeater, Router, AP, and APRepeater modes to fit your network needs. Extend existing WiFi, create a new wireless network, or convert wired connectionsall with one versatile device.. Wide Coverage for Dozens of DevicesWith a coverage range of up to 150 meters and support for 3264 connected devices, this outdoor access point ensures strong, stable signals across large areas. Optimize performance easily via user-friendly settings. Actual range may vary based on environment.. . - - -. .. . , -? ..

Effortless Setup The CPE830 wireless bridge simplifies the pairing method with easy-to-use dip switch pairing, eliminating the need for complex configurationIP, channel, scan. No specialized networking knowledge is required - simply pair and use. High-Speed Transmission Point to point wireless bridge outdoor utilizing advanced 5.8G 16dBi antenna transmission technology, our bridge delivers lightning-fast network speeds, easily getting wired speeds ranging from 100Mbps to 1000Mbps. Adaptive Power Adjustment Built-in 16dBm directional antenna with up to 27dBm power adjustment for a smooth connection across varying distances up to 3km barrier-free. Outdoor IP65 Level Weatherproof Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in extreme environments, real-time, long-term, stable, and efficient transmission, enhances user experience. Save on Subscriptions and Wiring Say goodbye to costly network subscription fees and the hassle of laying Ethernet cables. Ueevii wireless bridge provides a cost-effective solution for rapid network expansion without the need for additional wiring. Expand Network Wirelessly Extend your WiFi network wirelessly to outbuildings such as barns, shops, and garages with an outdoor point to point wireless bridge, effortlessly connecting remote areas to your main network hub,building to building wifi extender. Enhance Surveillance Coverage Seamlessly extend the coverage of your surveillance cameras to areas like yards, driveways, warehouses, and farms with point to point outdoor wifi bridge, ensuring comprehensive monitoring and security. Maximized Reach with Starlink Pair the CPE830 outdoor wifi bridge with your Starlink router for extended coverage to distant outbuildings, ensuring seamless connectivity across your property.

PRE-CONFIGURED FOR CONVENIENCE - Ready to use out of the box with no complex setup required, Plug and Play.. HIGH SPEED PERFORMANCE - 5GHz connection delivering over 450 Mbps throughput for fast and reliable data transmission.. ADVANCED NOISE IMMUNITY - Ensures optimal performance even in high-interference environments.. LONG-RANGE CAPABILITIES - Ideal for Point to Point and Point to Multipoint applications, covering extensive distances.. VERSATILE APPLICATIONS - Perfect for extending networks across buildings, connecting remote locations, or providing wide-area wireless internet access.. 1 year warranty and support provided by Tavora.

Plug and Play - Pre-Configured by our expert techniticians for the easy deployment. 5 GHz Wireless Bridge is ideal for Point-to-Point PtP and Point-to-MultiPoint PtMP links. Real-world throughput up to 450 Mbps. Integrated 19 dBi Directional Antenna. Focused beam for long-distance, interference-resistant communication. Excellent for rural connectivity, surveillance systems, or building-to-building links. Compact All-in-One Design - Combines radio and antenna in a single weatherproof housing. 1 year warranty and support provided by Tavora.

READY TO USE Pre-configured for convenience, with no complex setup required simply Plug and Play. NBE 5AC GEN 2. HIGH-SPEED CONNECTIVITY NBE 5AC GEN 2 works in the 5GHz frequency band and delivers over 450 Mbps throughput for fast and reliable data transmission.. MULTIPLE APPLICATIONS Ideal for expanding network coverage between buildings, linking distant sites, or offering broad-area wireless internet connectivity.. LONG-RANGE CAPABILITIES Perfect for Point-to-Point and Point-to-Multipoint setups, enabling connectivity over long distances.. EXCEPTIONAL NOISE IMMUNITY Ensures peak performance even in environments with significant interference.. PACKAGE INCLUDES 2 Paired NanoBeam 5 AC GEN 2, 2 POE Injectors with power cords, 2 PoleWall mounts, and an easy-to-follow Installation guide..

Complete pre-configured kit with 2 units for easy and fast setup. Long-range high-speed 5G wireless connectivity for outdoor networks. Supports IEEE802.11AC protocol for up to 450Mbps wireless access. Cost-effective hardware configuration with Qualcomm's enterprise-class master chip. Weather-resistant design for outdoor use in various climates and conditions. Powerful wireless transmission capability with high power and high reception sensitivity. Fast and easy setup with powerful wireless optimization features. Simple pairing process without the need for professional knowledge or computer operation. Small and sleek appearance with flexible wall hanging and easy installation options.

Point to Point Wireless BridgeWireless Bridge Point-to-Point uses wireless communication technology to transmit network data using air as a medium to carry out long-distance point-to-point or point-to-multi point interconnection. It can extend the network to another building, and it can also extend your monitoring range.. Easy to InstallJust connect the transmitter to the computer and the receiver to the IP camera to achieve video surveillance. Wireless bridge transmission and reception is automatic networking, no need for you to perform tedious configuration operations. Support point-to-point, point-to-multi point, transmissionreceiver flexible switching. Operating in the 902MHz-928MHz frequency band, with strong penetration and diffraction capabilities.. Long Range TransmissionWireless Ethernet bridge is transmitted by infrared has excellent performance. Indoor use can achieve signal transmission through 4 walls, with a transmission distance of 492 feet. Outdoor use can achieve long-distance transmission up to 2600 feetLight of Sight. Suitable for inconvenient long-distance layout of network cables, ideal for farms, wharf, garden, car park, etc.. Strong Signal TransmissionConnect one of the wireless bridges to the IP camera and the other to your computer for long distance monitoring without the need for long distance wiring or additional routers. Make long-distance wireless coverage, data transmission and wireless monitoring easy and professional. It meets many scenarios that require long-distance wireless transmission needs such as buildings, factories, farms, construction sites, warehouses, elevators, etc.. IP65 WaterproofWireless access point has the characteristics of waterproof, dust-proof and lightning protection. Operating Temperature -4F158F, which means you can safely use the wireless bridge outdoors without worrying about inclement weather..

CPE660 with 2 Bracket Mounts Wide ApplicationAdalov CPE660 wireless bridges come with 2 bracket mounts, two 100Mbps ports,long range work distance up to 3KM with 14DBi high gain Antenna, 5.8G wireless helps it get a higher network speed. Point to point wireless bridge with Point to Point, Point to Multi-Point, AP and Bridge operation mode. 2 Pole mounts can easily fit into a window as well as wall and are vertically and horizontally adjustable for more application.. 3KM Long Range Working DistanceWiFi bridge systems more suitable for wireless ethernet bridge connect. Several installations of these bridge systems, have been at 3 miles Line of Sight. It support wifi bridge outdoor, default Pre-program WDS mode ,no need seting , it can work two unit at the same time , no need long cable for connect to camera with your PC Bridge.. 5.8G Technology better than 2.4G Point to point Wireless bridge outdoor 5.8G frequency makes long range wireless bridge router has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference.The transmitter and receiver can talk to each other at up to 300mbps, at the ethernet ports which complete the bridge- on either side, max data speed is 100mbps, suitable for warehouses, barns, shops, or garages next to your house.. Suitable for Outdoor UseWireless ethernet bridge built-in 14DBi high-gain antenna enables the transmission highly effective rate between 2 wireless bridge . To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter. IP65 Waterproof, long durability and high quality material of ABS lead to rain resistance, 2KV thunder resistance, freeze resistance and sun resistance.. How to useThe AdaLov PTP wireless internet bridge pairing can be done by dialing without having to access the GUI, to give you a full plug and play bridge, that allows true networking. With its fast long range wireless bridge connection speed, into any Building, Farm or Ranch, Video cameras. Meanwhile, any problems, please feel free to contact us. We will do our best to help you. GET 100 SATISFACTION..

Upgraded Wireless Bridge - ULNA WiFi wireless bridge is FCC compliant FCC ID 2A6ZR-CPE609. No worries about specialized knowledge, lots of cables, or complex setup. Connect your home to outbuildings hassle-free, saving a lot of time and money.. Dual Gigabit High Speed - Supported by IEEE802.11ac and IEEE 802.11an, featuring dual 1000Mbps ports. Achieve up to 1200Mbps transmission between two outdoor wireless bridges, with a maximum network speed of 1000Mbps. Supports Master Bridge WiFi Access PointSlave bridge not supported, Point to Point, Point to Multi-Point, WDS and Video Network Mode for high-speed, reliable transmission.. Up to 5KM3.1Miles - With a built-in large circular antenna, the long range WiFi bridge extends networks up to 5 KM3.1Miles outdoors. This outdoor WiFi bridges is widely used in daily life. Ideal for extending WiFinetwork to warehouse, garden, barn, office, shop, or garage next to your home and surveillance security cameras.. Plug and Play - The outdoor point to point wireless bridge supports both dip switch pairing and non-dip switch pairing, allowing for real-time monitoring and flexible adaptation. The network bridge is ready-to-use, eliminating setup hassle. You can also access the GUI through your smartphone or computer to make further custom settings.. Wireless Security - This point to point wireless bridge outdoor also supports multiple encryption methods to ensure the security of the wireless network. Including WPA-Personal, WPA2-Personal, WPA-Auto-Personal, WPA-Enterprise, WPA2-Enterprise, WPA-Auto-Enterprise. Avoid unauthorized access and data breaches. Safeguard sensitive information and ensure the confidentiality of network connections.. IP65 Waterproof - Waterproof, heat-resistant, freeze-resistant and thunder-resistant for improved stability in harsh conditions. Works reliably in temperatures from -22-30C to 14965C. Tips for installation - Make sure the 2 PTP wireless bridge are installed face to face within Horizontal 60Vertical 30, have clear line of sight and no obstruction between them.. What's in The Package - 2 CPE 609P Wireless Bridge, 2Gigabit PoE Injector 24V, 2Cat 5e Network Cable, 2Metal Hoop, 1Mounting Screw Set, and User Manual..

What can the UeeVii CPE453 long-range wireless bridge help you do Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs. Also suitable for surveillance cameras.. Cost-effective Hardware Configuration Internet bridge adoption MTK's enterprise-class master chip, industrial-grade circuit design, supports IEEE802.11anac protocol and can provide stable wireless access speed and 10100Mbps Ethernet exchange processing speed.. Outdoor IP65 Level Weatherproof Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in the extreme environment, real-time, long-term, stable, and efficient transmission, enhance user experience.. 5.8G Powerful Wireless Transmission Capability Built-in dual-polarized 14dBi high gain directional antenna and the circuit design with high power and high reception sensitivity greatly enhances the distance of wireless transmission and improves the performance and stability of wireless transmission.. Pairing Simple and Efficient Point to point wireless bridge without the need for network professional knowledge, without computer operation, easy to dial code and adjust the main and slave devices' digital tube to the same value to complete point-to-point, point to multipoint within 8 points matching work..

Dual 100Mbps LAN PortsThe WB503X-S wireless bridge is equipped with two 100Mbps LAN ports, both of which can adapt to RJ45 Ethernet ports and can also be used as POE ports for power supply. The working voltage of this wifi bridge is 24V-55V, supports 24V and 48V POE power supply, and can also be powered by a POE switch, which is plug and play and more flexible in power supply.. 3KM Transmission DistanceThe wireless bridge adopts high-power circuit design, built-in 14dBi high-gain directional antenna, strong signal strength, and transmission distance up to 3KM 1.9 miles, which can be easily used in factories, farms, warehouses, parking lots, stores and other places. This point to point wireless bridge adopts Qualcomm engineering-grade chips from the United States, with stable and reliable performance, and can be well applied to PTP, PTMP and other working modes.. 5.8GHz Wireless TechnologyThe point to point wireless bridge operates on the 5.8GHz frequency band, with strong anti-interference ability, good stability, high scalability and flexibility, and can meet 8 non-overlapping channel deployments. The wireless transmission rate of this wifi bridge can reach 300Mbps, which can easily and stably perform data transmission or network expansion.. One-key BridgeThe outdoor point to point wireless bridge has a digital tube display, and point-to-point pairing can be completed by dialing. The operation is simple, and there is no need to lay network cables, saving a lot of manpower and costs. This network bridge can be used to connect surveillance cameras through one-key pairing to expand the monitoring range, and can also extend the network to a second building or further away for data connection.. IP65 WaterproofThe internet bridge adopts an outdoor rainproof design with IP65 protection level and 2KV lightning protection, which can easily adapt to various harsh outdoor environments and ensure the long-term stable operation of the equipment. This outdoor point to point wireless bridge adopts an arc-shaped appearance design, which is simple and generous. The included metal cable tie can fix the bridge on the pole, or you can use the key slot on the back of the bridge for wall mounting..

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.. CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.. Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.. Point-to-point bridge easily helps you expand the network range to the second buildingbarn, shop, warehouses, garages, or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.. Support PoE power supply 50 meters power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMACA, CSMACD, TCPIP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID 2A6EJ-CPE450.

High-speed dual-band experienceThe AC120 reaches full speed of 867 Mbps in the 5 GHz band and 300 Mbps in the 2.4 GHz band. Video, live broadcast, and gaming are not stuck, and enjoy an uninterrupted network experience. Our WiFi access point is equipped with LANWAN Ethernet port backward compatible with 10100 Mbps speeds for an excellent and stable network experience, providing faster transmission rates for wired connections.. Full coverage of installationOutdoor Wifi Extender supports POE power supply up to 100 meters of cable length, with a 48V adapter, no power socket is required, and power can be supplied with ordinary network cables, so it can be installed in any outdoor location including difficult-to-reach areas to achieve full coverage of outdoor scenes.. No fear of extreme weatherIt adopts IP66 waterproof body, with waterproof, windproof, cold protection, and lightning protection functions, and can face storms, sandstorms, dust and snow. It is not afraid of climate impact, equipped with dual chips and PA performance, ensuring the equipment can run stably 24 hours a day, and your garden monitoring, party live broadcasts, and outdoor security systems are always connected online. Note The POE converter is not waterproof.. Reliable Security Systemwifi extender signal booster using DDoS defense system, supports wireless roaming, adopts strong data encryption method WPAWAP-PSKWPA2AES, it can prevent unauthorized access, and uses a built-in firewall to block malicious attacks and protect your network security issues.. Multiple Rich ModesWifi Access Point with two external high gain antennas, RJ45 cables, power adapter, POE converter, installation kit and quick start guide, it supports RepeaterRouterAPBridge Modes, four rich modes that can be switched to the needs of the scenario, providing flexible and reliable connectivity for all your needs..

What is CPE361 WiFi bridge Plug and Play-Dialing pair WiFi bridge Replace Ethernet cabling. Point to point wireless bridge allows users to connect two or more locations by wireless transition, in order to share a single internet connection. You can get various modes like CPE, client bridge, PTP, PTMP. And this pair wireless bridge supports working with Surveillance Cameras,or Extends Wi-Fi network to far away places, such as barn,shop,garage,warehouses, factories, and construction sites.. Easy to Install and with 2pcs Mounting Bracket Wireless bridges can be install by Hold Pole or wall-mounted.Hold Pole The Metal Cable tiesincluded could hold tight bridge to a pole. Wall-mounted Key slots on the back of the bridge, allow for flush mounting against a wall. Offers 2pcs Wall mount pole mount Pole Brackets in the box. With this pole bracket, the direction of outdoor wireless bridge mounted on it could be changed horizontally and vertically.. 5KM Long Range Working DistanceGet an excellent range of up to 5 KM Line of Sight with 14DBi high gain directional Antenna.P2P bridges could be used in industrial settings where network connectivity is needed between large numbers of devices. They provide a cost-effective solution for connecting remote locations such as warehouses, factories, and construction sites. Extends Wi-Fi network to faraway places, make a special network for guests or home office.IP65 rate for outdoors usage.. 5.8 GHz and 1000Mbps LAN Port Supply High Speed Wirless bridge with 2 1Gbs LAN ports, 5.8G has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. 5.8 GHz band offers much higher speeds for much better network performance.The transmitter and receiver can talk to each other at up to 900mbps, at the ethernet ports which complete the bridge,on either side, max LAN data speed is 500Mbps.The Better the aim,the better the throughput.. What's You Can Get2 x CPE361 Wireless Bridges, 2 x Mounting Brackets, 2 x POE Adapter 2 x Small Metal Cable Tie4 x Big Metal Cable Tie, 2 x Network Cable 1 x User Manual. Professional after-sales reply within 24 hoursReplacement and Lifetime Technical Support.Any problems, please feel free to contact us. We will do our best to help you. GET 100 SATISFACTION..

Complete Wireless Bridge PoE System Includes two 5.8G wireless bridges and a 48V PoE switch, providing an integrated solution for extending networks to remote locations while powering connected devices like IP cameras.. 5KM Point-to-Point Range The wireless bridges offer up to 5KM transmission, perfect for linking remote buildings or extending your surveillance system with stable, long-distance connections.. Dual Gigabit RJ45 Ports Each wireless bridge comes with dual Gigabit ports for high-speed wired connections, ensuring efficient data transfer for multiple devices.. 48V PoE Power Supply The bridges support 48V PoE, allowing easy power and data transmission over a single cable, reducing installation complexity and costs.. PoE Switch with SFP Port The included PoE switch has 4 downlink PoE ports and 1 uplink port for easy connection to the wireless bridge and up to 3 IP cameras, providing both data and power.. Simplified Camera Setup With the PoE switch, you can power your wireless bridge and up to three surveillance cameras, making it perfect for large outdoor setups such as farms, barns, or remote offices.. Easy Installation Plug-and-play setup with pre-configured bridges that require no technical knowledge, making network expansion as simple as possible.. Reliable Data Power Delivery The system supports fast, stable data transmission and consistent power for devices, ensuring uninterrupted performance for surveillance and network systems.. SFP Port for Additional Flexibility The switchs SFP port adds more flexibility for long-distance fiber connections or extending networks to additional locations.. Weather-Resistant Design The IP66-rated weatherproof wireless bridges are built to handle tough outdoor environments, providing reliable operation in any condition..

Plug and Play Easy to Install CPE662 3PCS CPE kit supports one-key dialing pairingOne acts as a transmitter, while the other two serve as receivers, making it easy to use without requiring extensive network knowledge. It supports 24V POE powerNoteDon't use 48V POE48V Switch power it. It's easy to install, you can mount and use it on walls, pillars, and more.Great for extend network, video surveillance, and internet sharing for point to 2 points.. Point to 2 Points Wireless Bridge kit3pcs CPE662 kit has versatile applications. It eliminates the need for additional cabling and supports both point-to-pointPtP and point-to-multipointPtMP configurations. It can extend network coverage to areas with poor signal reception, such as farms, ports, garages, warehouses, remote construction sites, mountainous regions, and more. It is also suitable for long-distance wireless surveillance for applications like video, voice, and data transmission.. 5.8Ghz 1Gbs LAN Port Offers High-Speed The wireless bridge using a 5.8GHz frequency, enhancing wireless transmission performance and stability.The bridge features both 100Mbps and 1000Mbps ports, The transmitter and receiver can talk to each other at up to 900Mbps,and supply LAN DATA RATE up tp 433Mbps,which is deal for voice and video transmission with low latency. It is used to connect CCTV cameras, internet access, network extend or anything else that requires a data connection.. 3KM Outdoor Work Range The outdoor point to 2 points wireless bridge has versatile applications. Comes with a 16 dBi directional antenna to expand the range up to 1.9 miles.It can extend network coverage to areas with poor signal reception, such as farms, ports, garages, warehouses, remote construction sites, mountainous regions, and more. It is also suitable for long-distance wireless surveillance for applications like video, voice, and data transmission.. Reliable After-Sales Guarantee Package includes 3 pcs CPE662 Wireless Bridges, 1 pcs User Manual, 3 pcs POE Adapters, 3 pcs Metal Cable Ties, 3 pcs Network Cables. IP65-rated Wi-Fi bridge, making it resilient to various harsh weather conditions.In case of any missing or damaged components, please contact us promptly, and we will arrange replacements without delay. If you encounter any difficulties during installation and use, we are more than willing to provide assistance..

Plug and Play Gigabit Wireless BridgeThe CPE362 wireless bridge features a 1000Mbps LAN port, delivering high-speed and stable network performance. Its 14dBi high-gain antenna ensures long-distance connectivity up to 5KM. Ideal for extending WiFi bridge connections between buildings, CCTV cameras, video surveillance, network extend, Starlink network extend and network sharing.. Support VLAN for Secure and Isolated NetworksAdalov CPE362 outdoor CPE supports VLAN Virtual LAN, allowing network segmentation to enhance security and reduce congestion. Perfect for applications requiring data isolation, such as corporate WAN connections, guest networks, and secured IoT deployments.. Extend and Share Your Starlink NetworkThe CPE362 wireless bridge extends your Starlink network up to 5KM with fast 5.8GHz transmission and 1000Mbps LAN support. Perfect for bringing internet to remote barns, farms, garages, and guest houses. Easily share your connection with family, neighbors, or multiple buildings without costly cabling or extra monthly fees.. 5KM Transmission for Outdoor ApplicationsDesigned for long-range wireless ethernet bridge connections, the CPE362 can operate up to 3.1 miles 5KM in open, line-of-sight conditions. The IP65-rated waterproof and dustproof casing ensures stable operation in harsh outdoor environments, making it suitable for garages, barns, warehouses, farms, and remote offices.. 5.8GHz Frequency for High-Speed, Low-Latency PerformanceOperating on the 5.8GHz frequency, the wireless bridge delivers high-speed transmission up to 866Mbps with low latency. Better anti-interference performance ensures seamless video streaming, VoIP calls, and remote access without network congestion.. 48V PoE Power for Simplified InstallationThis WiFi bridge supports 48V Power over Ethernet PoE, eliminating the need for additional power adapters. Easily connect the wireless bridge to a PoE switch, reducing cable clutter and installation complexity. Power and data travel through the same Ethernet cable, saving both cost and time.. Cost-Effective Alternative to Fiber or Ethernet CablingThe PtP wireless internet bridge is an economical solution compared to laying expensive fiber optic cables or leasing dedicated network lines. Users share a single communication link without monopolizing the frequency, reducing operational costs while maintaining high-speed connectivity.. Adjustable Dual Mounting Brackets for Flexible InstallationThis wireless bridge kit includes two adjustable mounting brackets, allowing for both wall-mount and pole-mount installation. The flexible design ensures easy alignment and secure attachment, optimizing signal strength for better performance.. Plug Play Setup for PTP and PTMP Network ExtensionThe point-to-point wireless bridges outdoor automatically pair and connect upon powering up, making installation seamless. Supports both Point-to-Point PtP and Point-to-MultiPoint PtMP configurations, ideal for video surveillance, internet sharing, and remote network expansion.. Perfect Alignment Maximizes Signal StrengthFor optimal performance, install the point-to-point wireless bridges outdoor in a direct, face-to-face position with no obstacles in between. The better the alignment, the stronger the signal at the receiving end, ensuring a stable and high-speed connection..

What is CPE467 WiFi bridge Plug and Play-Dialing pair WiFi bridge Replace Ethernet cabling. Point to point wireless bridge allows users to connect two or more locations by wireless transition, in order to share a single internet connection. You can get various modes like CPE, client bridge, PTP, PTMP. And this pair wireless bridge supports working with Surveillance Cameras,or Extends Wi-Fi network to far away places, such as barn,shop,garage,warehouses, factories, and construction sites.. Easy to Install and with 2pcs Mounting Bracket Wireless bridges can be install by Hold Pole or wall-mounted.Hold Pole The Metal Cable tiesincluded could hold tight bridge to a pole. Wall-mounted Key slots on the back of the bridge, allow for flush mounting against a wall. Offers 2pcs Wall mount pole mount Pole Brackets in the box. With this pole bracket, the direction of outdoor wireless bridge mounted on it could be changed horizontally and vertically.. 1.5KM Long Range Working DistanceGet an excellent range of up to 1.5 KM Line of Sight with 8DBi high gain directional Antenna.P2P bridges could be used in industrial settings where network connectivity is needed between large numbers of devices. They provide a cost-effective solution for connecting remote locations such as warehouses, factories, and construction sites. Extends Wi-Fi network to faraway places, make a special network for guests or home office.IP65 rate for outdoors usage.. 5.8G Wireless Bridges Offers Higher SpeedsOutdoor Wifi Bridge 5.8G frequency makes long range wireless bridges has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference.Wireless Outdoor bridge systems more suitable for long range connect. Several installations of these bridge systems, have been at 2 miles Line of Sight. It support Wireless Bridge mode, default Pre-program WDS mode, no need long cable for connect to camera with your PC Bridge.. 24V POE Powered WeatherproofWireless Ethernet Bridge Powered by a POE adapter, just use the included power injector and your bridge has power and data transmitted over CAT-5 cabling. Easy, instant deployment of the CPE467 Wifi bridge is possible,and cable runs up to 150 feet with no signal degradation.Note Only the PoE port of the POE adapter supplies power. Long durability and high quality material of ABS lead to rain resistance, thunder resistance, freeze resistance and sun resistance.. Plug and Play p2p Wireless BridgeEthernet wifi bridge supports point to point and point to Multi-Point wireless connections,pairing can be done by dialing without having to access the GUI, to give you a full plug and play bridge. With a fast 100MBPS wireless speed, Point-to-point bridge easily helps you expand the network range to the second buildingbarn, shop, warehouses, garages, or wireless extend the IP camera monitoring range. Please feel free to contact us. GET 100 SATISFACTION.. What's You Can Get2 x CPE467 Wireless Bridges, 2 x Mounting Brackets, 2 x POE Adapter 2 x Small Metal Cable Tie 2 x Short Network CableFor test use 1 x User Manual. Professional after-sales reply within 24 hoursReplacement and Lifetime Technical Support.Any problems, please feel free to contact us. We will do our best to help you. GET 100 SATISFACTION.. Reliable Wireless Bridge and Save your MoneyWiFi Bridges can be installed on a pole or wall-mounted. Point to multipoint wireless bridges provides a more economical method than laying cable or leasing a private line.Users are not monopolizing channels, but sharing one communication link.It is used to connect CCTV cameras, buildings, sensors, corporate WAN connections, internet access, telecommunication masts, or anything else that requires a data connection.. IP65 for Outdoor UsageIP65 waterproofdustproof designed for outdoor environments where it can withstand harsh weather conditions.It can easily extend the network range in your house to the garage shop, barn, or video surveillance systems through Wi-Fi bridge signal transmission.. CPE467 is suitable for farm, barn, warehouse, shop, building to building, garage for long range network extender, or surveillance camera. And could work with starlink.You can easily connect your Starlink router at its clear line of sight location with where ever you need the internet service..

Easy Plug-and-Play Setup The CPE467 wireless bridge offers a simple plug-and-play installation, ensuring fast deployment for point-to-point wireless bridge outdoor setups. No GUI access required, making it the ideal choice for both residential and professional wireless ethernet bridge applications.. 1.5KM Long-Range Connectivity The CPE467 wireless bridge, with an 8dBi high-gain directional antenna, ensures stable point-to-point connections up to 1.5KM in clear line-of-sight. For best results, install the two bridges without obstacles in between, as obstructions can impact signal quality. Perfect for extending Wi-Fi to remote areas like warehouses and rural offices, it delivers reliable performance where wiring is not feasible.. High-Speed 5.8GHz Performance Operating on the 5.8GHz frequency, the CPE467 ensures anti-interference and high-speed connectivity, making it a great choice for demanding applications like CCTV surveillance and corporate WAN extension. Ideal for environments with high wireless traffic, it delivers consistent performance.. Weatherproof Design for Outdoor Use Built with IP65-rated weatherproof housing, this outdoor CPE ensures durability in harsh conditions. Whether for a wireless bridge in an exposed area or an outdoor Wi-Fi bridge setup, it is designed to withstand rain, dust, extreme temperatures, and other outdoor elements.. Versatile Mounting Options PoE Power The CPE467 includes two mounting brackets for easy pole or wall installation. Powered by 24V PoE, this wireless ethernet bridge simplifies setup by transmitting both power and data over a single CAT-5 cable, making it perfect for outdoor Wi-Fi bridge installations.. Point-to-Multipoint Connectivity Support point-to-multipoint configurations with the CPE467, ideal for extending your wireless coverage across large areas. Whether for rural offices or large warehouses, this Wi-Fi bridge provides a flexible, scalable solution to meet diverse connectivity needs.. Affordable Long-Range Wireless Coverage The CPE467 wireless bridge provides a cost-effective solution for extending your network over long distances. Perfect for connecting remote locations without the expense of fiber optics or traditional wiring, it ensures reliable internet access in challenging environments.. Easy Horizontal Vertical Alignment The adjustable mount on the CPE467 allows for precise alignment in both horizontal and vertical directions, ensuring optimal performance for long-range outdoor wireless bridge setups. Perfect for fine-tuning your outdoor wireless ethernet bridge installations.. Ideal for Tough Outdoor Environments Designed for outdoor use, the CPE467 wireless bridge offers reliable performance in a variety of environments. Whether you're setting up an outdoor Wi-Fi bridge or connecting remote offices, it guarantees stability in demanding conditions, from rain to extreme temperatures.. Seamless Point-to-Point Wireless Bridge With its high-gain antenna and stable 5.8GHz performance, the CPE467 wireless bridge excels in point-to-point outdoor connections, ensuring seamless, high-speed internet access across large properties. Perfect for businesses, surveillance, and network expansion in rural or industrial locations..

Wi-Fi 5 Device Capable of speeds up to 867 Mbps on 5 GHz, 3x faster than N300 bridges. No Trenching Simulate ethernet connections without the need of excessive cabling. PoE Enabled Allows for easy hassle-free deployment. High Powered 27 dBm high transmit power extends Wi-Fi building-to-building.

What Is CPE 200 CPE200 wireless bridge is a 5.8G high-performance,high-speed outdoor long-distance wireless network bridge.The advantage is long transmission distance, strong penetrating ability, and strong anti-interference ability .Point-to-point and point-to-multipoint outdoor coverage and applications without having to layout network cables making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.. 5.8G Technology IP65 Level Waterproof Design5.8G frequency using a new generation of 11ac technology is better than 2.4 G traditional CPE. It makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. Wireless bridge IP65 dustproof and waterproof, lightning protection,and antifreeze,is very suitable for outdoor use.. 2-3KM Transmission DistanceThis wifi outdoor bridge built-in 12dBi directional antenna can significantly improve the transmission and reception performance of wireless signals,data rate max up to 900Mbps between the bridge,which supports 2-3KM long-distance wireless transmission.suitable for warehouses, garden,barns, shops, or garages next to your house.. Point to Point Connection for Wireless Transmission Multi-Mode wireless wifi bridge with ethernet port and LED display Support Wireless AP, Repeater operation mode Support SSID broadcasting, Multi SSID up to 4 Support DHCP server. It transmits via wireless WiFi, reducing the trouble of wiring cable.. Tips on Product How to UseFull information LED display, include host-client modeH or C,the number behind is the channel number, signal strengthP,a number will be displayed after the pairing is successful, IP addressA, port wifipower led, the F button can switch the LED display info, the S button can complete the setting, more clearly know the device status, more conducive to debugging and maintenance..

2 UNITS Ubiquiti NanoStation Loco M5 READY TO INSTALL, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.. Ubiquiti NanoStation LocoM5 features the CPE design that expanded the global Wireless ISP industry.. Ubiquiti versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.. Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.. NanoStation locom5 can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE..