Support NFC RFID reading and writing, P2P communication with peers. Support I2C, SPI and HSU High Speed UART, easy to change among these modes. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. Arduino Raspberry Pi compatible, Small Size and easy to embed into your project. RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854.

Includes The package includes 50 pieces blank NTAG215 nfc cards Diameter 25 mm0.98 Inch, packaged with one piece coin container. The NFC tag is not adhensive.. Chip Feature The NFC chip is NXP Original NTAG 215 chip, with 504-byte usable Memory. with 504-byte usable Memory. Operating Frequency - 13.56 MHZ. It has a read-write lock function that makes the cards can be edited repeatedly or read-only. Cannot be edited or reset after set as read-only tag. Game character only can edit once. Data can be stored in more than 10 years.. Wide Application The blank NFC tags are compatible with TagMo Nintendo Switch and NFC-enabled phones and devices daily using for sharing contact info, business card, URL, text, security, authentication purposes, etc. Each NFC card is readwrite ready and easy to program.. Material Made of waterproof sturdy PVC material, no adhesive, no hole. Can be placed outdoors or near water without the risk of losing functionality.. Easy to Operate The process is simple, you just need to hover your phones over NTAG 215 coin tag, data will imput to your phones, there is no needs for energy, battery or manual pairing, convenient to use..

Chip C This Key Fobs uses FUDAN Chip work with 1K 13.56MHz wireless frequency, according to the ISO14443A standard, and contains 1K bytes of readwrite memory.. Compatible - RFID IC Key fob works with KABA, SAFLOK, MIWA AND ONITY LOCKS, also compatible with RC522 and PN532 readers. Can NOT work with HID, Salto and Assa Abloy Locks systems.. Applications - The IC cards can be used in Identification Access Control Loyalty Ticketing.. Reading Distance - It's contactless with 0-2.36 inch 0-6 cm reading distance based on the reader. Reading time is 1-2ms.. Pack Pack of 50pcs..

Suitable for All Skill Levels Whether you're an electronics novice, an experienced developer, or an educator, the RAB Holder caters to your needs. With its robust compatibility, it supports Arduino Uno R4 Minima Wifi Uno R3 Mega R3, Raspberry Pi 543B3Zero WZero, and breadboards 830400. Safety Durability Crafted from high-quality materials, this product promises long-lasting durability. Its design prioritizes user safety, preventing short circuits and offering enhanced protection for your Arduino, Raspberry Pi, and breadboard circuits. One-Stop Development Platform Whether you're an Arduino enthusiast or a Raspberry Pi developer, it provides a comprehensive and compatible development environment. From prototype design to actual testing, everything becomes straightforward and simple. Organized Workspace Say goodbye to the chaos and damage of circuit boards. The design of the RAB Holder ensures that all components and boards are stored neatly, offering a tidy workspace for your creative endeavors. Seamless Project Switching Managing multiple projects at once. The RAB Holder offers the perfect solution for multitasking, allowing you to effortlessly switch between different projects, boosting your work efficiency.

High quality Mi-fare Classic 1K chipWorking frequency 13.56MHz, 1K byte memory, ISO14443A protocol, password read and write protection, high scan strength, easy to program. Service life 10 years, 100,000 writes. UID Cant be changed and rewrite.. Durable PVC MaterialMade of high-quality PVC material, it is wear-resistant, waterproof and scratch-proof.with uniform thickness and excellent hand feel. Fits perfectly in wallets, card holders, and card printers.. Double-Sided Printable ISO StandardBlank white surface on both sides no magnetic strips, no slotsholes, no printed numbers, compatible with all ISO standard desktop photo ID card printers Evolis, Zebra, Badgy, Fargo, Magicard, DataCard. Note NOT suitable for inkjet printers.. CompatibilityCompatible with RC522 and PN532 readers, all RFID Chip are pre-programmed with a unique ID, 4-byte UID. UID cannot be changed, factory default key FF FF FF FF FF FF, compatible with most access control systems.Please ensure that your system is the same frequency 13.56MHz. Wide Compatibility for Multiple ScenariosPerfectly works with KABA, SAFLOK, MIWA, ONITY locks and RC522PN532 RFID readers ideal for commercial access control, hotel key cards, office security, attendance systems and identification management. Important NOT compatible with HID, Salto, Assa Abloy systems, Amiibo and Tagmo..

It not only supports Mifare cards and Class A and B cards conforming to the ISO 14443 standard, but also supports NFC and FeliCa contactless technology.. This is a USB hot-pluggable device that complies with the CCID standard and is ideal for applications such as personal identity security authentication and online micropayments.. This is a USB full-speed device 12 Mbps, which reads NFC tags at 106 kbps212 Kbps and 242 Kbps, allowing faster read and write speeds and higher efficiency. To increase the safety factor, you can choose to configure an ISO7816-3 compliant SAM card slot in the ACR122.. Widely used in areas such as access control, electronic payment, bus e-ticketing, highway toll collection systems, network verification, logistics, and supply chain management.. Product content 1 card reader, 1 software CD, and 3 test IC cards.The product is compatible with this free software NFC Tools GUI. Product packaging 1 IC card reader writer, 1 software and manual CD, 3 IC cards. IC card type NXP Mifare1 series, card type S50. The product manual and readwrite program are in the CD.. This card reading device cannot be read, and the frequency of writing andor cloning ID card 7610 is 125kHz.. If you have any problems, please contact us and we will solve them for you within 24 hours.

Module Feature With ceramic antenna, excellent signal.. Data Storage Saves configuration parameter data in EEPROM Down.. Battery Comes with data backup battery and LED signal indicator.. Interface Default baud rate is 9600, interface is RS232 TTL.. Compatibility Compatible with various flight control modules..

Chip - FUDAN Chip work with 1K 13.56MHz wireless frequency, according to the ISO14443A standard, and contains 1K bytes of readwrite memory.. Compatible - RFID cards work with KABA, SAFLOK, MIWA AND ONITY LOCKS, also compatible with RC522 and PN532 readers. Can NOT work with HID, Salto and Assa Abloy Locks systems.. Applications - The IC cards can be used in Loyalty Ticketing Identification Access Control.. Reading Distance - It's contactless with 0-2.36 inch 0-6 cm reading distance based on the reader. Reading time is 1-2ms.. Small Size - 1.57'' x 1.22''x 0.18'' 40mm314.5mm Small Size..

Size 0.91 inches, Resolution 128 x 32Viewing angle160Supported voltage 3.3V-5V DC,no need for level conversion chipsPower consumption during normal operation 0.06WFull screen illumination 0.08WColorBlue. Embedded driver IC SSD1306Communication I2CIIC interface, only requires two IO ports,Compatible with Arduino nano, R3 board, Raspberry Pi 4B3B3B2BZero,ESP8266, ESP32, STM32, etc.. No backlight required, each pixel emits light independently. It has ultra-high contrast, high resolution, bright and clear dots, making it easy to read even in small fonts. Graphics and text information can be directly displayed on microcontroller projects, and OLED controllers do not have embedded fonts. Users can create fonts through font generation software. Equipped with 20 DuPont wires 10 male-female and 10 female to increase convenience.

About Product -- Contains 30pcs MF1 Classic 1K RFID Smart Cardseach card individually OPP bag packed. Blank white both sidesNo printed numbers, no magnetic strips and no slots or holes. About Chip-- MF1 Classic 1K chips are produced by the Fudan brand in Shanghai, China and are compatible with NXP chips. The wireless frequency of the MF1 Classic 1K card is 13.56MHz, which complies with the ISO14443A standard and contains 1K bytes of readwrite memory. Each chip has a unique UID number, but the UID cannot be changed or rewrittenDefault button FF FF FF FF FF FF.. About Material-- The MF1 Classic 1K card is made of durable and waterproof PVC material, and the antenna adopts ultrasonic winding technology. The card has a five layer structure, which is the same size as the credit card. The surface is smooth and glossy, wear-resistant, stable, non-toxic and odorless, and hygienic and safe.. About Application-These RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. But they can NOT work with HID,Salto and Assa Abloy LocksSystems,Amiibo and Tagmo, etc.All cards are pre-programmed with a unique ID4 Byte UID. The UID is NOT changeable.. Printable--These cards both sides are printable on all ISO Standard Desktop Photo ID Card Printers Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.NOT USE FOR INKJET PRINTERS.

This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place.. Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etcsuitable for various DIP type components suitable for any type of Raspberry Pi GPIO breadboard PCB.. Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength. 5pcs 2.05x3.5 PCB Solder-able Breadboard 2pcs 2.0x1.5 mini PCB Solder-able Breadboard for prototyping and transferring,Blue. Lead-free and RoHS compliant for longer shelf life.

High-Capacity VersatileIndustry-Standard Classic 1K 13.56MHz RFID card with 1KB memory for complex data storage. Ideal for access control, prepaid systems, membership cards, and NFC solutions. Fully compliant with ISO14443A protocol.. Plug-and-Play CompatibilityWorks with Major Readers Locks Seamlessly integrates with RC522, PN532, ACR122U readers, and KABASAFLOKMIWAONITY locks. Perfect for hotels, offices, smart homes. No configuration required ready to use out of the package.. Advanced Security ControlsCustomizable Protection Set password-based readwrite permissions to prevent unauthorized cloning. Factory default key FF FF FF FF FF FF recommend updating for enhanced security. Includes programming guide for quick setup.. Unique Traceable IDPermanent 4-Byte UID Each card pre-programmed with unalterable factory-locked UID for secure asset tracking, user identification, and anti-counterfeit applications.. Professional-Grade CustomizationPrintable Durable CR80 size 85.5x54x0.8mm with smooth PVC surface. Compatible with ZebraFargoEvolisDatacard thermal transfer printers. Individually wrapped for scratch-free printing.Not for inkjet..

The display screen is controllable and can be used for APP remote control, remote environmental data collection and remote. Data , remote parameter setting and other batch development applications.. ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions. Application Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications. ESP32 WIFIBluetooth Development Board 2.8 240320 Smart Display Screen 2.8inch LCD TFT Module With Touch WROOM Support 1 UARTSPII2CPWMADCDAC and other interfaces 2OV2640 and OV7670 cameras, built-in flash 3picture WiFI upload 4TF card 5multiple sleep modes 6Embedded Lwip and FreeRTOS 7STAAPSTAAP working mode 8Smart Config 9AirKiss one-click network configuration 10secondary development. The ESP32-24325028 development board is based on the company's ESP32-D0WDQ6 controller, with dual core CPU and clock frequency up to 240MHz. It integrates peripherals, high-speed SDO, SP, UART and other functions, and supports automatic download..

PDF tutorialmore than 22 lessons and clear listing in a nice package. The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested.. Lcd1602 module with pin header not need to be soldered by yourself. This is the upgraded starter kits with power supply module, 9V battery with dc. High quality kit with UNO board, compatible with Arduino UNO R3, UNO R4, MEGA 2560 R3, NANO..

Requires some solderings. Easy to build, perfect for your Arduino project. Breakout board version, shield version also available.

High-Precision Voice Recognition and Broadcasting WonderEcho AI voice module seamlessly integrates voice recognition and broadcasting functions, achieving a recognition accuracy of up to 98. It supports both English Chinese keywords, offering robust capabilities for intelligent voice applications.. Advanced Neural Network Processor Powered by a neural network processor, WonderEcho AI voice module supports convolutional neural network CNN operations, greatly improving both the speed and accuracy of voice recognition.. Wide Compatibility WonderEcho AI voice module's Type-C and I2C interfaces make it fully compatible with Arduino, Raspberry Pi, STM32, ESP32, Jetson, microbit, Scratch, and ROS, enabling integration into a variety of development environments.. Extensive Voice Interaction Library Preloaded with over 100 voice interaction commands, the module comes with comprehensive user guides and online tutorials, allowing users to integrate voice functionality and reduce development time easily.. Must-Have AI Voice Sensor Module for Robot Building Equip robot with WonderEcho AI voice module, enabling it to hear your voice, execute your commands, and achieve voice control functions Combined with a vision module, it can realize voice and visual interaction, enhancing the fun and practicality of robot-smart AI interaction. WonderEcho is a must-have sensor module for every robot enthusiast when building a robot.

Supply Voltage 3.3V to 5.5 V Model Number NFC Card Reader Module Type C Interface. With NFC library support for Arduino and Raspberry Pi, this contactless communication module facilitates the development of NFC-enabled products. Utilize the capabilities for Arduino and for Raspberry Pi platforms to easily integrate NFC functionality into your projects.. support for cards IC access card, IC lift card, electric car NFC card. Based on PN532 Chip Built with the PN532 chip, this near field communication reader ensures reliable and efficient 13.56MHz NFC communication. It features an onboard antenna, eliminating the need for external antenna coils. The module is compatible with SPI, I2C, and UART interfaces for seamless communication.. Support SPI, I2C and UART interface selection switching.

NFC RFID Function Supports NFC RFID reading and writing, and P2P communication with peers.. Interface Support Supports I2C, SPI, and HSU High-Speed UART, easy to switch between these modes.. Level Shifter On-board, with 5V TTL for I2C and UART, 3.3V TTL SPI.. Compatibility Compatible with Arduino and Raspberry Pi, small in size, easy to embed in projects.. ReaderWriter Capability Supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards like CD97BX, CD Light, Desfire, P5CN072 SMX, Innovision Jewel cards like IRT5001 card, and FeliCa cards like RCS_860 and RCS_854..

PCB Dimensions Size approx 1.68in1.59in.. Voltage 3.3V-5V. Support I2C, SPI and HSU High Speed UART, NFC RFID reading and writing, P2P communication with peers.. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI,Built in PCB Antenna, with 4cm6cm communication distance.. RFID ReaderWriter Support Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards , FeliCa cardssuch as IRT5001 card, RCS_860 and RCS_854..

Support NFC RFID reading and writing, P2P communication with peers. Support I2C, SPI and HSU High Speed UART, easy to change among these modes. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. compatible for Arduino Raspberry Pi compatible, Small Size and easy to embed into your project. RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854.

PN532 NFC NXP RFID Module Support NFC RFID reading and writing, P2P communication with peers. Support I2C, SPI and HSU High Speed UART, easy to change among these modes. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. PN532 NFC NXP RFID Module Compatible for Arduino Raspberry Pi compatible, Small Size and easy to embed into your project. RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854.

Chip - FUDAN FM11RF08 compatible MI-FARE Classic 1K 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of readwrite memory,MI-FARE and MI-FARE Classic are trademarks of NXP B.V.. Printable and Compatible - Printable on all ISO Standard Desktop Photo ID Card PrintersNOT Use for INKJET Printers Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. Can NOT work with HID,Salto and Assa Abloy Locks systems. Programmable - All cards are pre-programmed with a unique ID4 Byte UID. The UID is NOT changeable, factory default key FF FF FF FF FF FF.. Reading Distance - There is Mi-fare Class Chip inside of card via lamination.it's contactless with 1-10 cm reading distancebased on the reader.. Standard Credit Card Size- 3 38 x 2 18 85mm54mm Standard Credit Card Size CR80 30 Mil,each card individually OPP bag packed. Blank white both sidesno printed numbers, no magnetic strips and no slots or holes.

PN532 gilt PCB and Small dimension and easy to embed into your project , support I2C.SPI and HSU high speed UART, change between those modes. Typical Operating Distance have been updated to 5cm7cm reading distance, work in NFC Mode or RFID readerwriter mode. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI. Work as RFID readerwriter, work as 1443-A card or a virtual card. Exchange data with other NFC devices such as smartphone.

13.56mhz,ISO14443A. All the Chip has Unique ID pre-programed,4 byte UID,And UID Can't change. work with RC522 and PN532. All the Package has YARONGTECH Brand sticker to make sure you buy our brand product. red,blue,black,green,yellow,white,orange,red color available in stock,logo printing is optional.

13.56mhz,ISO14443A. All the Chip card has Unique ID pre-programed,4 byte UID,And UID Can't change. rfid bracelet work with RC522 and PN532. Diameter 60mm for adult size,waterproof. Black,Blue,Orange,Red color available in stock.and logo printing is optional.

COMPATIBILITY Works seamlessly with Raspberry Pi and supports 13.56MHz NFCRFID communication protocols. FUNCTIONALITY Features PN532 chipset for reading and writing NFC cards, tags, and other NFC-enabled devices. INTERFACE Includes standard pin headers for easy connection and integration with microcontroller projects. PACKAGE CONTENTS Includes one NFC reader module board and one blue RFIDNFC key fob tag for testing. TECHNICAL SPECS Operating frequency of 13.56MHz with built-in antenna for reliable card reading and data transfer.

PN532 gilt PCB and Small dimension and easy to embed into your project , support I2C.SPI and HSU high speed UART, change between those modes. Typical Operating Distance have been updated to 5cm7cm reading distance, work in NFC Mode or RFID readerwriter mode. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI. Work as RFID readerwriter, work as 1443-A card or a virtual card. Exchange data with other NFC devices such as smartphone.

3PCS PN532 Module V3 Kit Reader Module Kit with S50 White Card Key Card.

3PCS PN532 Module V3 Kit Reader Module Kit with S50 White Card Key Card.

Current 13-26mADC 3.3V Idle Current 10-13mADC 3.3V Data Transfer Rate Max.10Mbits Power Voltage 3.3V Operating frequency 13.56MHz, MFRC522 Supports MIFARE series higher-speed contactless communication, bidirectional data transmission rate up to 424kbits. The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.. RC522 is a highly integrated contactless 13.56MHz card reader chip, applicable for the user who need to design or manufacture the RF card terminal.. RFID RC522 Module is a better choice for the development of smart meters and portable handheld devices, the module can be directly loaded into the various reader molds.. The module can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.

Quantity -- The parcel contains 100pcs MF Classic 1K RFID Smart Cardseach card individually OPP bag packed. Blank white both sidesno printed numbers, no magnetic strips and no slots or holes. Material quality, production process --The MF Classic 1K card is made of durable and waterproof PVC material, and the antenna adopts ultrasonic winding technology. The card has a five layer structure, which is the same size as the credit card. The surface is smooth and glossy, wear-resistant, stable, non-toxic and odorless, and hygienic and safe.. High quality MF Classic 1K chips--MF Classic 1K chips are produced by the Fudan brand in Shanghai. The wireless frequency of the MF Classic 1K card is 13.56MHz, which complies with the ISO14443A standard and contains 1K bytes of readwrite memory. Each chip has a unique UID number, but the UID cannot be changed or rewritten Default button FF FF FF FF FF FF.. Compatible--These RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. But they can NOT work with HID,Salto and Assa Abloy LocksSystems,Amiibo and Tagmo, etc.All cards are pre-programmed with a unique ID. The UID is NOT changeable.. Printable--These cards both sides are printable on all ISO Standard Desktop Photo ID Card Printers Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.NOT USE FOR INKJET PRINTERS.

Quantity 20 pieces round 13.56MHz RFID tags. Diameter 25 mm 1 inch. This MF classic 1K tag is adhesive, can be pasted. Please check our store and there are many small quantities for you to choose from, you can buy the experience with a small quantity first. Note 1 The UID cannot be changed or rewritedNote 2 Please make sure this M1 S50 RFID tag is compatible with your system before purchasing. Chip High quality M1 Classic 1K chip, working frequency 13.56MHz, 1K byte memory, ISO14443A protocol, password read and write protection, high scan strength, easy to program. Service life 10 years, 100,000 writes. UID Cant be changed and rewrite. Non-NDEF format. Note This MF 1K tags is MF1 S50, donot compatible with MF0, MF2 and MF3. Application These MF1 S50 RFID stickers proximity cards work with KABA, SAFLOK, MIWA and ONITY LOCKS, also compatible with RC522 and PN532 readers. But they can NOT work with HID, Salto and Assa Abloy LocksSystems, TagMo, etc. Note If you want to add the M1 RFID tags to your lock system, please ensure that your system is the same frequency 13.56MHz. Compatibility Compatible with RC522 and PN532 readers, all M1 Classic 1K stickers commercial access proximity cards are pre-programmed with a unique ID, 4-byte UID. UID cannot be changed, factory default key FF FF FF FF FF FF, compatible with most access control systems.Note Not supported to use on metal surface and strong magnetic field. Hassle Free Warranty We are confident that you'll love our NFC Tags. If, for any reason, you're not satisfied with the 13.56 mhz rfid tags stickers, please do not hesitate to send the seller a message through Amazon and we will respond within 24 hours..

NTAG215 Chip This NFC tag has 504 bytes of inventory, a readwrite time of 1 to 2 milliseconds, and a readwrite lock function. These coin-sized cards can be edited or read repeatedly, write the information you want quickly, provide you with enough storage space, operating frequency 13.56MHz, sensing distance 0 - 10 cm.. Self-adhesive backing NTAG215 coin card comes with self-adhesive backing, which can be attached to the back of the cell phone or walls and other smooth surfaces to fix it.. Premium Materils The NFC coin card is made of high quality PVC material with a diameter of 25mm, compact and portable with storage box, easy to use.. Easy to Use NTAG215 can be used with TagMo and all NFC-enabled mobile phones and devices. You need to ensure that the device supports NFC function. After installing the corresponding application, you only need to hover your phone or device when using it. Stop at the NTAG 215 coin tag and the data will automatically be entered into your phone. It is recommended that you do not use the card in a strong magnetic environment or on a metal surface, as this will destroy its functional. Wide application Programmable NFC tags can be stuck in any location, such as electronic tag shelf, smart advertisement, outdoor mobile phone holder tag, etc. NFC chips can automatically perform tasks and share information, bringing convenience to life. You can use NFC stickers to share social information, connect wifi, play games, create a smart life and more.. Package Includes 50 blank nfc cards, NFC chip is easy to carry, you can use it anytime and anywhere in your daily life. The quantity is enough to share with your family. Use with friends..

Quantity -- The parcel contains 10pcs M-IFARE Classic 4K RFID Smart Cardseach card individually OPP bag packed. Blank white both sidesno printed numbers, no magnetic strips and no slots or holes. Material quality, production process --The M-IFARE Classic 4K card is made of durable and waterproof PVC material, and the antenna adopts ultrasonic winding technology. The card has a five layer structure, which is the same size as the credit card. The surface is smooth and glossy, wear-resistant, stable, non-toxic and odorless, and hygienic and safe.. High quality M-IFARE Classic 4K chips--M-IFARE Classic 4K chips are produced by the Fudan brand in Shanghai, China and are compatible with NXP chips. The wireless frequency of the M-IFARE Classic 4K card is 13.56MHz, which complies with the ISO14443A standardMemory size4kB32 sectors of 4 blocks and 8 sectors of 16 blocks.256 blocks, with 16 bytes per blockEach chip has a unique UID number, but the UID cannot be changed or rewritten Default button FF FF FF FF FF FF.. Compatible--These RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. But they can NOT work with HID,Salto and Assa Abloy LocksSystems,Amiibo and Tagmo, etc.All cards are pre-programmed with a unique ID. The UID is NOT changeable.. Printable--These cards both sides are printable on all ISO Standard Desktop Photo ID Card Printers Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.NOT USE FOR INKJET PRINTERS.

RFID Sticker operates at 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of readwrite memory,but UID cant change,uid is not rewritable. These RFID stickers work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. But they can NOT work with HID,Salto and Assa Abloy LocksSystems,TagMo and Amiibo etc.. All stickers are pre-programmed with a unique ID4 Byte UID. The UID is NOT changeable, factory default key FF FF FF FF FF FF. It cant stick on metal,so it will not work on metal,if you need to stick on metal,please choose the anti-metal tag. if you need to make customized logo,please contact with us.

RC522 RFID Reader Writer Compatible with for MFRC522 chip. Working Voltage 3.3V. Working frequency 13.56MHz. Support SPI I2C IIC interface. RC522 Module S50 Blank Card Key Ring.

RFID readerwriter supports1k, 4k, Ultralight, and DesFire cards. ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMXInnovision Jewel cards,FeliCa cardsRCS_860 and RCS_854. Support I2C.SPI and HSU High Speed UART, P2P communication with peers,NFC with Android phone.. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI,Built in PCB Antenna, with 4cm6cm communication distance.. Power voltage3.3V-5VCompatible Pi,Small Size and easy to embed into your project.. ServiceWe have always cared about the customer experience and improve the product function details,please feel free to contact us..

Support NFC RFID reading and writing, P2P communication with peers. Support I2C, SPI and HSU High Speed UART, easy to change among these modes. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. compatible for Arduino Raspberry Pi compatible, Small Size and easy to embed into your project. RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854.

Support NFC RFID reading and writing, P2P communication with peers Support I2C, SPI and HSU High Speed UART, easy to change among these modes. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. Small size and easy to embed into your project. RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854. Package Include You will receive 3Pcs PN532 NFC NXP RFID Module V3 Kit. If you have any questions about the V3 Kit, please feel free to contact us,we will provide you with a satisfactory solution..

RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. Support NFC RFID reading and writing, P2P communication with peers. Support I2C, SPI and HSU High Speed UART, easy to change among these modes. Small Size and easy to embed into your project.

With CUID card and CUID key ring,M1 white card and M1 key ring. Support I2C, SPI and HSU High Speed UART, easy to change among these modes. On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI. Arduino Raspberry Pi compatible, Small Size and easy to embed into your project. RFID readerwriter supports Mifare 1k, 4k, Ultralight, and DesFire cards, ISOIEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 SMX, Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854. Support NFC RFID reading and writing, P2P communication with peers.

Please check the online User Manual carefully before using. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Onboard PN532 chip, supports various NFCRFID cards like MIFARENTAG2xx, etc.. Three interface options I2C, SPI, and UART, configured via jumpers and switches. Breakout control pins, for easily connecting with host boards like STM32Arduino. Comes with online development resources and manual examples for Raspberry PythonC, STM32, Arduino.