Tie rod puller - 2Pc press screw. For separating pitman arm from steering gear.. Drop forged and heat treated chrome vanadium steel for strength. Made from quality materials. Durable and long lasting. Separates pitman arm from steering gear. Drop forged and heat treated chrome vanadium steel provides superior strength. Fine threaded center screw allows maximum torque. Meets or exceeds ANSI standards. Features lifetime factory warranty.

Designed to fit Pitman arms on domestic cars and light trucks. Spread is 1-12 inch. Reach of 2-12 inches. 34-16 x 4-34 inch forcing screw provides enough power to remove stubborn Pitman arms. Conical design allows the puller to fit securely on the Pitman arm.

a. QUICK BALANCER REMOVAL This harmonic balancer puller kit by Orion Motor Tech is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time. b. SAFE EASY OPERATION This mechanic tool set includes a 3-jaw puller for a firm and secure grip, a push bolt fitted for 19 mm hex drive and 38 square drive tools that easily centers up to drive the rods, and 4 forcing rods 4, 5.4, 6.2, 7.5 to keep your work fast and efficient. c. WIDE COMPATIBILITY Our harmonic damper pulley puller set works for dampers and balancers in a wide range of domestic and import vehicles, compatible with Cadillacs since 1988, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, GM Generation II engines, the 1995 Mitsubishi Eclipse, and more. d. DURABLE CONSTRUCTION Each part in this professional tool kit is made from structural-grade AISI 1045 medium carbon steel for superior strength with a cataphoretic electro-coating for corrosion-resistant durability and longevity. e. CONVENIENT STORAGE CASE This puller set comes with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs.

Auto Truck Maintenance. Country of manufacture United States. Manufacturer OTC.

5-Tool Coverage This front end service set includes 22mm ball joint separator along with 27mm and 33mm pitman arm pullers plus 19mm tie rod remover and outer tie rod tool. One kit handles all your steering and suspension separation jobs without hunting for extra pullers. Damage Free Removal Ditch the pickle fork and stop destroying dust boots on reusable parts. These scissor-style separators apply controlled pressure to pop tapered studs loose without hammering or prying that tears rubber seals and shortens part life. Precise Jaw Opening Features adjustable pullers specifically shaped for tight spaces. The pitman arm tool removes steering box arms where hammers cannot reach. The tie rod lifter separates ends cleanly. Solves access problems in cramped wheel wells effectively. Forged Steel Build Heat-treated alloy steel construction stands up to rusted frozen joints that bend cheaper tools. Black oxide coating blocks corrosion from road salt and brake fluid keeping the kit working strong through years of shop use.. Universal Fitment Works on most domestic and import cars along with light trucks vans and SUVs. Adjustable jaw designs grab different stud sizes and fit into tight spaces around steering knuckles where clearance runs short.

The versatile design allows this tool to be used as a pitman arm remover for many small domestic rear wheel drive vehicles. Or as a tie rod end puller for many domestic and import vehicles. The jaws with a spread of 1 give a positive grip in tight work places.

ApplicationThe pitman arm puller is specifically used to remove pitman arms on cars and light trucks 34 ton, also for bearings, collars, gears removal applications. Adjustable Forged JawsRugged and forged two jaws can be adjusted to fit various sizes and shapes, while two clamp bolts lock the tool in place for a slip-free grip during removal, pressure screw designed ball head for striking. High Quality The heavy duty 2 jaw puller is built with high-grade carbon steel to withstand 10 ton pulling force. Ideal for high-torque repairs in professional garages or DIY projects, , ensuring safe removal without damaging shafts or splines. Easy to UseRemove the fastener nut from the pitman arm shaft, adjust the puller jaws and pressure screw, and secure the jaws with two clamping bolts. Then tighten the pressure screw against the shaft until the pitman arm is released, and remove it. 247 Customer Service We offer lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Please feel free to contact us if you have any questions.

Application Amerbm heavy duty pitman arm puller is designed to remove the pitman arm shaft in cars and light trucks 34 ton. It can also be used for bearing, collar and gear removal.. Design Features forged adjustable jaws and two clamp bolts that lock jaws together. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip.. Material Made of 45 carbon steel, black oxide finish resists corrosion and rust. Adjustable and have rugged forged jaws shaped to fit the job.. Function Pressure screw has ball head designed for striking. This tool includes an adapter for added versatility and both pullers cover a variety of pulling jobs. Similar to OEM 27170.. Package Pressure Screw, H-Frame, Jaw Bolt, Jaw, Clamp Bolt and Wing Nut, Pressure Screw Adapter..

High Performance Functionality compatible with Sheppard M100 gearboxes, our pitman arm puller is designed to effortlessly remove stubborn pitman arms off it, specially engineered for heavy duty tasks, ensuring a hassle free maintenance experience for commercial trucks. Wide Ranging Compatibility our pitman arm puller is not only effective but also versatile It is commonly applied for Class 6-8 transportation trucks and equipment, compatible with KenworthPeterbiltFreightlinerMackVolvo, paving the way for an all encompassing use. Safe and Precise bid goodbye to the risky hammering and torch cutting methods of the past, our pitman arm tool offers a higher degree of safety with every use Crafted from high strength steel castings and designed for high capacity pulling, it promises strength, power, and durability. Ease of Use our pitman arm puller stands out for its user friendly design It is designed to slide in quickly for immediate use, significantly reducing labor time and simplifying the disassembly process A tool that is not just robust but extremely easy to manipulate, thus boosting your productivity. Unmatched Durability and Strength when it comes to longevity and endurance, trust in our pitman arm puller Cast from nice material, it is made to withstand high capacity pulling Experience not just the power, but also the exceptional durability that this tool can offer.

VERSATILE USE OMT's 5-piece pickle fork tool set features three fork open sizes, easily removing standard sizes of ball joints, tie rods, and Pitman arms from a vast range of cars, vans, and trucks. COMPLETE SET Our ball joint remover set includes an 1116 tie rod fork, a 1516 ball joint fork, a 1-18 Pitman arm fork, a knurled striking handle for regular hammers, and an adapter handle for air hammers. HEAT-TREATED The 1045 steel used in these premium ball joint separators has been heat treated for greater strength and durability and their nickel coatings protect them from corrosion, extending their service life. EASY OPERATION Our tie rod removal tool offers exceptional convenience and quick set up with our precision threaded forks that are easily switchable between two handles. NON-SLIP PERFORMANCE The knurled striking handle of OMT's Pitman arm removal set provides a sure grip for complete control of your work without slippage.

Versatile Suspension Tool Set Includes pitman arm puller, ball joint separator, and tie rod removal tools to handle a variety of front-end maintenance tasks without damaging suspension components.. Heavy-Duty Pitman Arm Puller Built for strength and precision, this puller effortlessly removes stubborn pitman arms in demanding applications, ensuring smooth and efficient repairs.. Complete Ball Joint Removal Installation Kit Safely and effectively remove and install ball joints across a wide range of vehicles, speeding up your suspension repair process.. Accurate Tie Rod Removal Tools Designed to remove and replace tie rod ends cleanly and securely, helping maintain proper vehicle alignment during front-end service.. Clear Instructions Portable Carrying Case Plastic-laminated, step-by-step instructions with detailed photos are included inside a heavy-duty carrying case that keeps all tools organized, protected, and easy to transport..

VERSATILE DESIGN Features an adjustable opening range of 2.5-4.1 inches, perfect for removing pitman arms from various heavy-duty truck steering systems. DURABLE CONSTRUCTION Made from high-strength steel to withstand the force required for tough removal jobs on commercial vehicles. ADJUSTABLE FIT Precision-engineered jaws provide optimal grip and leverage for efficient pitman arm removal. PROFESSIONAL GRADE Specifically designed for use on heavy-duty trucks and commercial equipment maintenance. PRACTICAL FEATURES Includes a forged forcing screw for maximum pressure application and controlled removal process.

5 in 1 Ball Joint Separator KitDesign for easy and safe removal of ball joints, tie rods, pitman arms. Avoid to damage the hammers and pickle forks. Including 5 adjustable tools, can be used alone or with other tools. greatly improving efficiency. Heavy Duty MaterialThe tie rod end removal tool is constructed from alloy steel with heat-treated and anti rust plating finish, which ensures corrosion resistance and long term durability. The jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job. All In OneThe pitman arm puller comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x Plastic Carry Case. Universal CompatibilityThis front end service tool kit is suitable for many small domestic rear wheel vehicles, imported vehicles, and light trucks. Essential tool kit for vehicle maintenance tasks. Convenient Carry CaseThe ball joint removal tool comes with a portable high-quality ABS plastic box, easy to store and protect all the tool parts, allowing for quick storage and transportation.

Automotive Front End Maintenance Set Specifically designed for front end work in automobiles, including the replacement of tie rod ends, ball joints, steering linkages, and steering boxes. These pullers are crafted to preserve part integrity, unlike pickle-fork tools that might cause damage. The set comprises Tie Rod End Pullers, Pitman Arm Puller, Ball Joint Remover, and Tie Rod End Lifter. An invaluable addition to your toolkit for easier automotive repair and maintenance.. Versatile Application The kit can be used to easily removes common pitman arms, tie rods, and ball joints. It contains 1 pitman arm puller, 1 universal ball joint separator, 1 outer tie rod remover, and 2 tie rod end pullers. All the tools come in a heavy-duty blow-mold case with secure latches, ensuring easy and safe storage.. Durable and Sturdy Build Crafted from premium alloy, this ball joint separator set is designed to handle the toughest jobs by removing stubborn ball joints, tie rod ends, and pitman arms. Each tool is engineered to withstand high-force applications.. Adjustable and Effective This range of adjustable tools caters to both domestic and foreign vehicles, offering various shapes and sizes. The effective press-type ball joint separator enables easy separation of pitman arms, tie rods, and ball joints without causing damage to boots or other components, unlike fork-type removers.. Effortless Ball Joint Removal Bicos's ball joint separator tools provide the most convenient method for removing ball joints. This high-quality ball joint separator is essential for auto mechanics and enthusiasts, facilitating the effortless loosening and removal of ball joints for replacement and repair..

Wide Application This pitman arm puller pull can be used for other applications such as bearing, collar, and gear removal, services cars and light trucks 34 ton. Function The pitman arm puller is designed for the toughest Pitman arm jobs. Theyre adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the Pitman arm ensuring a solid grip. Premium This tool is made of carbon steel, ensuring wear resistance, durability, and long term use. Design Pressure screw has ball head designed for striking. Tips Please check the relevant information before purchasing to make sure the product is what you need. Any question, connect us anytime.

All-in-One Front End Service KitIncludes 5 adjustable tools 1 x Ball Joint Separator, 1 x Tie Rod Ball Joint Remover, 1 x Conical Pitman Arm Puller, 1 x Pitman Arm Tie Rod End Puller, and 1 x Pitman Arm Puller. Comes in a durable carrying case for organized storage and easy transport.. Premium Heavy-Duty ConstructionMade of high-strength heat-treated alloy steel with black oxide treatment to resist rust and corrosion. The ball joint separator is designed to withstand the toughest automotive repair jobs for long-lasting performance.. FunctionThis front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms without damaging boots, sleeves, or other components.. Portable ConvenientAll tools of the ball joint removal tool come in a high-quality carrying case, keeping your tools organized and secure. Ideal for on-the-go use in professional workshops or home garages.. Wide Vehicle CompatibilityThe versatile design allows this pitman arm puller to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..

UNIVERSAL REMOVAL TOOLS This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts. BETTER TOGETHER Our bearing puller set includes three puller sizes, offering maximum spreads of 3, 4, and 6 and reaches of 4.3, 5, and 7.3 to cover most applications. 3 JAW DESIGN These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage. REVERSIBLE JAWS Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes. TOOLS FOR MECHANICS Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Professional KitCovers tie rod end puller, pitman arm puller, goat leg pulley puller, ball joint puller and heavy duty tie ros end tool, solving diverse front-end repair tasks in one set.. Premium MaterialForged from high-carbon steel with heat treatment, resistant to deformation and wear, ensuring longevity under heavy-duty use. The Front End Service Tool Kit can remove the most stubborn ball joints, tie rod ends, and pitman arms. Universal Vehicle CompatibilityThe versatile design allows this repair tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller. Precision grooves and jaws fit most cars, SUVs, and trucks. Easy to carryThe case is crafted from high-quality ABS hard plastic for durable. Conveniently keeps all your tools in one organized and secure place. 247 Customer SupportmaXpeedingrods offers lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Feel free to contact us if you have any questions.

For Cars, Trucks, and SUVs Efficiently separates the ball joint from the spindle support arm on most newer domestic and import front wheel drive vehicles, including trucks and SUVs. Extended Range In order to fit the variety of vehicles this near universal tool can service, it adjusts up to 2 38 inches for various ball joints. Designed With Care This ball joint splitter tool carries less risk of damaging the boot than a pickle fork joint remover and a hammer. Low Profile Give yourself plenty of room to work This ball joint separator is designed to access tight access where most ball joint separators wont fit. Easy to Use This ball joint removing tool is designed to be the easiest means to replace top of the line ball joints Simply twist the removable nut until the joint pops out.

Used to Remove Commercial Heavy-Duty Yokes on Transmissions and Rear-End Differentials Without Damage to Yokes or Other Components.. For use on yokes with a bearing diameter between 1-78 and 2-316.. These yokes are commonly found on Class 6-8 trucks.. Kit comes with strong, grade eight bolts. All components are heat-treated..

Professional front end service tool set makes it easy to separate pitman arms, tie rods, and ball joints without damageSaving you time and effort during repairs. Total 5 units tools are in different shapes and sizes, can remove even the most stubborn ball joints tie rods pitman arms Design works with the steering and suspension ball joints found in most cars and light trucks. Made of heat-treated alloy steel with great strength Durable alloy means these tools can stand up to the toughest jobs. All tools were packed in a convenient ABS carrying case for easy storage and transportation Stay Organized. Item Includes 1x Ball Joint Separator 1x Tie Rod and Ball Joint Remover1x Conical Pitman Arm Puller1x Pitman Arm and Tie Rod End Puller 1x Pitman Arm Puller1 x Carrying Case.

Works on Light Trucks Built to remove Pitman arms from domestic cars and light trucks, this tool handles steering component removal during suspension or steering repairs with precision and consistency. Forged for Strength The drop-forged yoke and heat-treated design deliver long-lasting strength and durability, making it reliable for tough jobs where standard pullers may bend or slip.. Optimized Fit and Reach With a 1-516 yoke opening and 2-12 depth, this puller offers secure engagement on stubborn arms while maintaining enough clearance for tool maneuverability in tight spaces.. Reduces Risk of Damage Engineered to apply even pressure, this Pitman arm puller helps reduce the risk of component damage during removal, a common concern during steering system work.. Ready to Use Packaged pre-assembled and ready for immediate use with a 12 drive tool, so technicians can spend less time setting up and more time turning wrenches..

5-IN-1 SERVICE SET The front end service tool kit includes 1 x Pitman Arm and Tie Rod End Puller 1 x Ball Joint Separator 1 x Pitman Arm Puller 1 x Conical Pitman Arm Puller 1 x Tie Rod and Ball Joint Remover. 1 x Storage Case for secure storage. This tie rod end removal tool set can easily remove common pitman arms, tie rods, and ball joints.. Premium Material The 5-in-1 pitman arm puller is constructed from high hardness alloy steel for ultra-strength and durability, professional grade heat-treated and anti-rust coating for longer service life, can stand high intensity extrusion. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.. High Efficiency The full range adjustable tool set with different shapes and size allows for both foreign and domestic vehicles. Professional ball joint separator kit makes it safely and easily to separate pitman arms, tie rods, and ball joints without damaging to boots and other parts that fork-type removers may cause.. Easy Operation According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage bootsleeve and other parts.. Wide Compatibility This bearing extractor can complete a wide variety of pulling jobs on many different pieces of equipment. The parts within this bearing splitter set are effective in removing bearings, pulleys, gears, and bushes, the versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..

Made from High-Quality zinc plated forged carbon steel, our tools are tough and durable enough to handle even the toughest jobs. Remove stubborn ball joints, tie rod ends, and pitman arms with ease.. Our tool set is universally compatible with a wide range of vehicles, making it the perfect pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. Our custom-molded ABS case is crafted from high-quality hard plastic, making it the perfect choice for amateur or professional mechanics on the go. Keep all your tools organized and secure in one convenient place.. At MT MoreTechData, we stand behind the quality of our tools. If you experience any issues, please don't hesitate to contact us. We want to ensure you're only getting the best tools for the job..

Comprehensive Kit -- This front end service Set includes a pitman arm puller, ball joint separator, and tie rod end removal tool for all your suspension maintenance needs on most cars and light trucks.. Pitman Arm Puller -- Designed to easily remove pitman arms without damaging components, saving you time and effort during repairs.. Ball Joint Separator -- Separates ball joints efficiently, allowing for smooth disassembly and reassembly of suspension parts.. Tie Rod End Removal Tool -- Simplifies the removal of tie rod ends, ensuring a hassle-free suspension repair process.. Solid Construction -- Crafted from high strength alloy steel, heat treatment, these tools offer long-lasting performance and reliability.. Convenient Storage-- A rugged carrying case is included to keep all tool components neatly organized and stored..

Pitman Arm Puller.

OTC's 6295 Front End Service Set Includes five popular tools that are compatible with front end components used on a wide range of vehicles from a variety of manufacturers. Having the right tools for the job saves time and frustration when servicing ball joints, tie rods, pitman arms, stabilizer links, sway bars and other suspension components. Includes two pitman arm pullers for large or small ball joint applications, two ball joint separators, and three different tie rod pullers. Rugged construction materials and robust design ensures these powerful tools will get the job done for years to come. Durable blow molded storage case keeps kit components organized and protected when not in use and fits in standard-depth toolbox drawers for easy storage. NOTE For tool longevity and performance always lubricate the forcing screw threads before first use and as needed.

Fits Most Domestic Cars Light Trucks Designed for universal application on pitman arms commonly found in U-joint steering systems of passenger vehicles and light-duty trucks.. Efficient Conical Puller Design Tapered conical geometry helps center and grip the pitman arm securely for stable and safe removal.. Robust Forcing Screw Heavy-duty 34-16 4-34 threaded forcing screw delivers high mechanical advantage to dislodge stubborn pitman arms.. Optimal Size Reach With a spread of approximately 1-12 and reach of 2-12, this puller fits a wide range of steering arm configurations.. Durable Construction Built from hardened Steel components to withstand professional shop use and repeated heavy-torque operations.. Warranty Service--We offer warranty.If any issue arises with the product, rest assured that we are here to assist you promptly and without hesitation..

Used for Pulling Pitman Arms. Heat Treated Frame for Strength and Durability. Pressure Screw has Ball Head Designed for Striking. Frame has Opening for 1-316 Shafts.

ALL IN ONE FRONT END SERVICE KIT Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.. HARDENED ALLOY CONSTRUCTION Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. PROFESSIONAL PORTABLE ABS CASE The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.. ORION MOTOR TECH PROMISE If any issues from our tools arise please dont hesitate to contact us. We guarantee the quality of our tools and want to ensure youre only getting the best. Because to do perform your best, you deserve the best, thats our Orion Motor Tech Promise..

forged arm for enhanced strength. bearing design reduces endplay. Induction hardened to match OE fatigue life. undergo extreme impact, wear, and fatigue testing to ensure quality and durability. studs use cold-formed manufacturing to maintain very close tolerances. greaseable design for long life. Fit type Vehicle Specific.

Includes pitman arm puller. Includes ball joint separator.

New patented design saves time, increases productivity. Labor intensive removal of steering sector is now unnecessary. Compact design of puller allows easy access to the Pitman arm. Live center-on forcing screw and easy use of a standard wrench results in less effort required. Works on most domestic SUV's and pickups.

Country of OriginChina. Package length6.8. Package width4.6. Package height3.2.

Part Type Pitman Arm Puller. Manufacturer Part Number 10388. Engineered to effortlessly remove the most stubborn pitman arms found on intermediate trucks, school buses, and other vehicles equipped with a nut release pitman arm. Commonly found on class 3-5 trucks and equipment. For use with Ram 35005500, for use with Chevrolet 35005500, for use with Ford F-350550, for use with Isuzu NPR etc.. The Intermediate Pitman Arm Puller improves safety and efficiency by removing the need for dangerous hammering or cutting, and works effortlessly with up to a 12 impact wrench for smooth pitman arm removal.

Pitman Arm Puller 10389. Effortlessly remove stubborn Pitman Arms on the Sheppard M110 gearboxes, designed specifically for heavy-duty tasks. Commonly found on class 6-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.. Replaces hazardous hammering and cutting methods, offering safer operation. Constructed from high-strength steel casting, this tool delivers powerful, durable performance for heavy-duty pitman arm removal. Features a quick-slip design for fast setup and immediate use, reducing labor time and making pitman arm removal effortless and efficient.

Windshield Wiper Arm Puller - Compatible with select vehicles.

COMPATIBILITY Fits 2011-2019 Chevrolet Silverado 2500 HD 2011-2019 Chevrolet Silverado 3500 HD 2011-2019 GMC Sierra 2500 HD 2011-2019 GMC Sierra 3500 HD. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. Heavy duty design. Engineered steel composition results in a stronger component. Loose or worn chassis parts can lead to premature tire wear. Greaseable. Lock Nut for installation. Direct OE replacement.

Remove tie rods and pits from all types of vehicles, including cars, light trucks, and SUVs. Ideal for airing or maintaining vehicle components like wheels, shocks, steering, brakes, etc. Made of high-quality steel with excellent service life and resistance to wear and tear. Heat-treated center s increases durability and enhances strength. Adjustable jaws fit around the pitman arm for precise removal.

Type Intermediate Pitman Arm Puller. Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms. Help prevent damage that can be caused by other removal methods. 41450 works on pitman arms on medium duty trucks and other vehicles with pitman arms held on with a nut. For impact use, please check the size of the product whether it fits for yours or not before purchase..

Made specifically for pulling steering pitman arms. No adjustments or screws to retain puller, this special puller can remove the most stubborn or frozen pitman arms. Forged steel jaws. Fast and effective.

ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with all the receiver tubes and removinginstalling adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle. PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press bushing removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.. ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..

Designed to easily remove difficult pitman arms on Sheppard M110 gear boxes on heavy duty commercial trucks class 6-8 including Volvo, Mack, Kenworth, Peterbilt, Freightliner and more. Can be used with any sized impact wrench up to 34 in. as well as hand ratchet, and or breaker bar. Maximum glove size opening of 4.5 in.. Made of high quality CR-MO alloy steel for daily use and heavy torque. Eliminate dangerous hammering or cutting torch methods.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.. Heavy duty design. Engineered steel composition results in a stronger component. Loose or worn chassis parts can lead to premature tire wear. Exclusive cover plate protects against debris leaking into the bearing surface. Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part. Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.. Heavy duty design. Engineered steel composition results in a stronger component. Loose or worn chassis parts can lead to premature tire wear. Exclusive cover plate protects against debris leaking into the bearing surface. Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part. Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength.

This puller is designed for the toughest pitman arm jobs. Adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip. Includes an adapter for added versatility and both pullers cover a variety of pulling jobs. For medium and heavy-duty trucks with a maximum jaw spread is 2-14 inches.

Removes Pitman arms on pickups and sport utility vehicles. The wedge end is placed between the Pitman arm and steering gear box and with just a few hammer blows it separates them. Works on 1988 and newer Chevrolet and GMC 12 and 34-ton 4WD pickups Suburban Tahoe and Yukon.

This puller is designed for the toughest pitman arm jobs. Adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip. Includes an adapter for added versatility and both pullers cover a variety of pulling jobs. For cars and light trucks with a maximum jaw spread is 2-18 inches.

Efficiently and safely removes large pitman arms on 34 and 1-ton pickup trucks including F450F550 models with ZF steering gear.. Patented design uses leverage action and requires less torque and space compared to other pitman arm tools and removal methods.. Accommodates pitman arms that are 3 wide.. Less energy required so there is no need to use an impact gun. Requires less clearance - eliminates need to remove steering box.

Sheppard M110 Pitman Arm Puller.

Safely and easily remove pitman arms from the output shaft on Sheppard M100 gearboxes. Designed for high capacity pulling with heavy-duty constructed casted steel. Works on most class 6-8 transportation trucks and equipment including Peterbilt, Mack, Volvo, Freightliner, Kenworth, and more. Impact Drive Size Socket 1 14 in.. Maximum glove opening is 4.165 in..

This set contains three pitman arm pullers for use on a wide range of 1983 and later Cadillac, Chevrolet, Dodge, Ford, GMC, Hummer, Jeep, and Ram applications. Includes OTC 8150 conical pitman arm puller, 6496 compact pitman arm puller and 6497 super-duty pitman arm puller. 8150 conical pitman arm puller is compatible with select 1994-08 Dodge Ram 1500, 2500, 3500 trucks 2019 Ram 1500 trucks 1999-04 Jeep Grand Cherokee, 2007 Jeep Wrangler. 6496 compact pitman arm puller is compatible with select Ford Expedition, F-150, F-250, F-350 Select Cadillac Escalade Select Chevrolet Blazer, Express, Silverado, Suburban, Tahoe Select GMC Savana, Sierra, Yukon Hummer H2 Select Lincoln Navigator. 6497 super-duty pitman arm puller is compatible with SELECT 2005 Ford F-250 and F-350 4x4 Super-Duty trucks Select 2014 Ram 2500 and 3500 trucks Select 2018 Jeep Wrangler JL, 2020 Jeep Gladiator JL.

Removes tie rod ends and pitman arm assemblies from many cars and light trucks.. Opening size 1 18-Inch .. Pull travel 2 18-Inch .. 38-Inch drive square port in center screw allows for use with 38-Inch drive ratchet.. Heat treated center screw..

Effortlessly remove stubborn Pitman Arms on the Sheppard M100 gearboxes, designed specifically for heavy-duty tasks. Commonly found on class 6-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.. Eliminate dangerous hammering and cutting torch methods that have been used in the past, providing higher levels of safety with every use. Made from high strength steel casting, which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool. Engineered for effortless use, it attaches quickly and streamlines the pitman arm removal process.

Remove on a Multitude of Models Remove stubborn seized u joint cups on most intermediate trucks, buses, and light industrialfarm equipment with this heavy duty u joint tool.Fit Type Universal Fit. Gentle On Vehicles Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing this u joint tool No need to use hammering or heating methods. Easy To Use The heavy duty u joint removal tool can be used with a 12-inch drive impact wrench or smaller Yokes easily fit into the 1.25 to 1.7 inch outside diameter bearing cup. Durable Build Quality Easily torque the u joint removal tool to remove a seized back or front driveshaft U-joint Built to hold up to frequent repairs. Keep Money in Your Pocket Working on a budget doesnt mean you have to sacrifice quality This OEM puller is a cost-effective option to get the job done right.

COMPATIBILITY Fits 2007-2007 Chevrolet Silverado 2500 HD 2001-2006 Chevrolet Silverado 3500 2000-2013 Chevrolet Suburban 2500 2007-2010 Chevrolet Silverado 3500 HD 2009-2021 GMC Savana 4500 2007-2007 GMC Sierra 1500 Classic 2007-2007 GMC Sierra 2500 HD Classic 2007-2007 GMC Sierra 3500 Classic 2007-2007 GMC Sierra 1500 HD Classic 2003-2022 GMC Savana 2500 2003-2022 GMC Savana 3500 1999-2006 GMC Sierra 1500 2001-2006 GMC Sierra 1500 HD 1999-2004 GMC Sierra 2500 2001-2010 GMC Sierra 2500 HD 2007-2007 GMC Sierra 2500 HD 2001-2006 GMC Sierra 3500 2001-2013 GMC Yukon XL 2500 2007-2010 GMC Sierra 3500 HD 2003-2009 Hummer H2. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. Heavy duty design. Engineered steel composition results in a stronger component. Loose or worn chassis parts can lead to premature tire wear. Exclusive cover plate protects against debris leaking into the bearing surface. Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part. Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength.

Puller body is drop-forged and heat-treated for strength. Designed to work on even the most stubborn Pitman arm pulling jobs. Position puller jaws over Pitman arm and turn center screw to free Pitman arm. Fit type Universal.

Product Type Tools. Package Dimensions 13.716 Cm L X14.224 Cm W X8.382 Cm H. Country Of Origin China. Package Weight 2.0lbs.

Use with impact wrench to remove hubs, drums and brake rotors dics. Durable 8.5 ton rated forged design, made from same alloy used on Astro's famous ball joint presses. Use with 1-14 socket and 1-14 or 32mm wrench. Drum Rotor pulling arms include raised stops for use with ratchet straps not included for especially difficult applications. Includes three different hub adapters to fit all types of hub sizes, arms spread up to 14 wide.

Heat-treated. High-strength cast steel.

Heat-treated. High-strength cast steel.

INCLUDES 1 34 Center x 4-14 Diameter Heavy-Duty 4-Way Slotted Puller Yoke 1 34-16UNF x 5-38 and 1 34-16UNF x 2-34 Grade 5 Hardened Live-Center Forcing Screw 3 516-24 UNF x 3 Grade 8 Stepped Bolts 3 each 8mm x 1.25 x 90mm, 8mm x 1.25 x 45mm, 14-28UNF x 3, 8mm x 1.25 x 65mm, 516-24UNF x 3, 516-18UNC x 3.5, 38-24UNF x 1.5, 38-16UNC x 2, 38-16UNC x 3, 38-16UNC x 4.5, and 10mm x 1.5 x 35mm Grade 8 Washer Head Bolts. QUALITY The forged 4-way slotted puller yoke includes two lengths of Grade 5 hardened forcing screws and a set of 4 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening. The screws and washers feature premium hardened steel construction, and thanks to the high quality blow molded case, you'll never have to worry about misplacing any of them on the job.. APPLICATIONS This 43-piece set can be used on a variety of jobs harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today. It also includes special stepped bolts for use with GM 1990 and Newer 3300-3800 V-6 Crankshaft Pulleys.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Harmonic Balancer Puller Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Need a manual for this tool Download it for free on our website. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization..

FRONT END SERVICE KIT Orion Motor Tech's 3pc ball joint removal tool set includes lever and scissor style ball joint separators and a conical pitman arm puller so you can quickly and safely remove standard pitman arms, outer tie rods, and ball joints. VERSATILE FITMENT The pitman arm tool has a 0.79 jaw spread and depth the ball joint separator offers a 0.85 spread, 0.77 depth, and 2.16 max opening the scissor-style puller features a 0.75 spread, 1.3 depth, and 2.07 max opening. POWERFUL LEVERAGE Our heat-hardened alloy steel tools with corrosion-resistant black oxide-coated forcing screws offer outstanding strength and durability, making it easy to remove even the most stubborn, stuck, and seized parts. CONVENIENT ORGANIZATION The custom molded case is crafted from ABS hard plastic for the amateur or professional mechanic on the go never miss a job, with everything well organized for storage or transport. FRIENDLY REMINDER Please verify compatibility by comparing the component specs with your vehicle's parts.

EFFORTLESS REMOVAL Engineered to effortlessly remove the most stubborn pitman arms found on intermediate trucks, school buses, and other vehicles equipped with a nut release pitman arm, ensuring efficiency and safety.. WIDE COMPATIBILITY Commonly found on class 3-5 trucks and equipment. For use with Ram 35005500, for use with Chevrolet 35005500, for use with Ford F-350550, for use with Isuzu NPR etc... SAFE EFFICIENT By eliminating the need for hazardous hammering and cutting torch methods, the Intermediate Pitman Arm Puller enhances workplace safety and efficiency. Its compatibility with up to a 12 inch impact wrench ensures a seamless, hassle-free removal process.. DURABILE STRONG Constructed from high-strength steel casting, this tool is designed to withstand high-capacity pulling, ensuring durability, reliability, and longevity. Its straightforward design allows for quick and easy application, significantly reducing labor time and manual effort.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

COMPREHENSIVE PITMAN ARM SERVICE The Tiger Tool Pitman Arm Master Kit equips you with everything needed to service pitman arms across a broad spectrum of medium to heavy-duty vehicles. Whether working on trucks or heavy equipment, this kit provides the necessary tools for efficient maintenance of class 3-8 vehicles.. WIDE COMPATIBILITY Application commonly found on class 3-8 trucks and equipment. For use with Ram 35005500, for use with Chevrolet 35005500, for use with Ford F-350550, for use with Isuzu NPR, for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc... SAFE, EFFICIENT, EASY TO USE The Kit includes the Sheppard M100 Pitman Arm Puller part number 10385 to easily remove even the most stubborn pitman arms for use on Sheppard M100 gearboxes. It is engineered to be used with up to a 34 impact tool, it is made with high strength steel casting designed for high capacity pulling. This kit also includes the Pitman Arm Spreader part number 10386, this tool will safely efficiently remove pitman arms on 2-ton and larger trucks and is engineered to be used with a 12 impact tool.. DURABLE EFFECTIVE The medium Duty Pitman Arm Puller part number 10388 allows the removal stubborn pitman arms on medium duty trucks, school buses, other vehicles with a nut release pitman arm. This tool may be used with up to a 12 impact wrench. The kit also includes the Sheppard M110 Pitman Arm Puller part number 10389 to easily remove pitman arms for use on Sheppard M110 gear boxes. This tool may be used with up to a 34 impact tool. Both tools eliminate dangerous hammering and cutting torch methods.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

1 ALL IN ONE FRONT END SERVICE KIT Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.. 2 HARDENED ALLOY CONSTRUCTION Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.. 3 UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. 4 PROFESSIONAL PORTABLE ABS CASE The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.. 5 ORION MOTOR TECH PROMISE If any issues from our tools arise please dont hesitate to contact us. We guarantee the quality of our tools and want to ensure youre only getting the best. Because to do perform your best, you deserve the best, thats our Orion Motor Tech Promise..

For 2005 and later Ford F250 and F350. A heavy-duty puller for the large Pitman arms on Ford 250 and 350 trucks. Jaws are forged and heat-treated for strength. Position puller jaws unmder the Pitman arm, turn center screw to remove.

Services cars and light trucks 34 ton. Can be used for other applications such as bearing, collar, and gear removal. Features forged adjustable jaws and two clamp bolts that lock jaws together. Pressure screw has ball head designed for striking. Includes A. Pressure Screw B. H-Frame C. Jaw Bolt D. Jaw E. Clamp Bolt and Wing Nut F. Pressure Screw Adapter.

1. ALL IN ONE FRONT END SERVICE KIT Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.. 2. HARDENED ALLOY CONSTRUCTION Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.. 3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. 4. PROFESSIONAL PORTABLE ABS CASE The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.. 5. ORION MOTOR TECH PROMISE If any issues from our tools arise please dont hesitate to contact us. We guarantee the quality of our tools and want to ensure youre only getting the best. Because to do perform your best, you deserve the best, thats our Orion Motor Tech Promise..

The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes.. Application Commonly found on class 6-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.. This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool.. Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor.. The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..

Exceptional Quality This tie rod removal tool is crafted from high-strength heat-treated forged steel for outstanding durability black oxide-coated bolts effectively ward off corroding. Engineered for heavy-duty applications, ensuring professionals and home users alike enjoy long-lasting, reliable performance. Easy to Operate Select the appropriate puller for the ball joint, insert it into the opening of the ball joint, align it with the bolt, and use a suitable ratchet wrench to rotate for detachment. Effortlessly dismantles stubborn ball joints, tie rods, steering knuckles, and steering links. Time- and labor-saving design Simple setup with ergonomic grip for easy handling in tight spaces. Use with standard ratchet wrenchjust insert, align, and turn to remove stubborn components quickly. Saves time and effort during front-end repairs. Universal Compatibility Versatile design suitable for most domestic and imported cars and light trucks. Suitable for front suspension and steering system repairs, including ball joints, tie rods, steering arms, and steering linkages. Integrated Tool Kit This 5-piece ball joint removal tool set includes a ball joint separator, tie rod and ball joint puller, conical pitman arm puller , pitman arm and tie rod end puller , and pitman arm puller. All tools are neatly organized within a sturdy carrying case for convenient storage and transport.

2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc. This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.. 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.. The button makes it easily to change the puller into internal or external gear puller.. There are 5 different sizes of jaw puller for you to choose to deal with different parts small, medium and large 3, 4, 6, 8, 10.

VERSATILE TOOL KIT CARVALAX 5-in-1 ball joint separator tool kit includes five tools Ball Joint Separator1, Tie Rod and Ball Joint Remover1, Conical Pitman Arm Puller1, Pitman ArmTie Rod End Puller1 , and Pitman Arm Puller1, ensuring compatibility with a wide range of ball joints, tie rods and pitman arms.. DURABLE CONSTRUCTION Crafted from durable, high-strength carbon steel, these tools are designed with pulling capacity of up to 5 tons, being able to withstand the rigors of professional use. Perfect for most small rear-wheel-drive cars and SUVs, and Pickup trucks.. ERGONOMIC DESIGN Each separator features an ergonomic grip and a compact design, making them easy to handle and operate in tight spaces, reducing fatigue during extended use.. EASY TO USE Simple and straightforward setup, allowing for quick ball joint and tie rod removal without damaging surrounding components, enhancing efficiency in your automotive repairs. Components in the kit can be used separately or with other puller tools, fit for all types of puller jobs.. CONVENIENT STORAGE CASE CARVALAXs front end service tool kit comes with a robust ABS carrying case that keeps all tools organized and easily transportable, allowing for efficient storage and quick access when needed..

High Quality Material - The 14 inch 2 jaw gear puller made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.. Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.. Adjustable Design - Adjustable clamping depth and grip width, the 2-jaw separator tool suitable for different sizes of gears and bearingsenables many bearings and components to be dismounted. Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, brake drum, etc. Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller..

Size The relevant specifications of the wiper arm puller are jaw opening 116 - 1-116 6-28mm and outer diameter1-78 48mm. Easy to Use Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling.. Great Material The windshield wiper arm removal tool is made of 45 carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time. Multifunction Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline.. Package Included 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.

This is a complete set of coverage, including five different SAE standard pieces. Forks are designed to interchange with either of the handles, making it easy to remove standard-size ball joints, tie rods, and pitman arms from a variety of cars and light trucks. The 40 steel used in these premium tie rod removers has been forged and heat treated for greater strength and durability, and chrome-plated surfaces protects them from corrosion, extending their service life. The knurled handles of these pitman arms separators provide sure grip for complete control of your work without slippage, and protect tool threads to extend tool lifetime and provide technician comfort. Set includes 1 Track rod fork 1116 , 1 Ball joint fork 1516 , 1 Pitman arm fork 1-18 ,1 7-78 knurled striking handle for use with conventional hammers, 1 6-3132 adapter handle for use with air hammer. Tie rod removal tool set includes a sturdy blow-molded case for neat organization and rapid identification. It's a greater reach and penetration in places where space is limited and difficult to access.

APPLICATION --- Fumrtcy Adjustable Heavy Duty Pitman Arm Puller is designed to remove the pitman arm shaft in cars and light trucks 34 ton.. WIDE COMPATIBILITY --- Can be used for other applications such as bearing, collar, and gear removal.. DESIGN --- Pressure screw has ball head designed for striking. Features forged adjustable jaws and two clamp bolts that lock jaws together.. MATERIAL --- Made of 45 carbon steel, black oxide finish resists corrosion and rust for providing much longer service time.. INCLUDES --- A. Pressure Screw B. H-Frame C. Jaw Bolt D. Jaw E. Clamp Bolt and Wing Nut F. Pressure Screw Adapter.

ApplicationThe pitman arm puller is specifically used to remove pitman arms on cars and light trucks 34 ton, also for bearings, collars, gears removal applications. Adjustable Forged JawsRugged and forged two jaws can be adjusted to fit various sizes and shapes, while two clamp bolts lock the tool in place for a slip-free grip during removal, pressure screw designed ball head for striking. High Quality The heavy duty bearing puller is built with high-grade carbon steel to withstand 10 ton pulling force. Ideal for high-torque repairs in professional garages or DIY projects, , ensuring safe removal without damaging shafts or splines. Easy to UseRemove the fastener nut from the pitman arm shaft, adjust the puller jaws and pressure screw, and secure the jaws with two clamping bolts. Then tighten the pressure screw against the shaft until the pitman arm is released, and remove it. Heavy Duty Construction Tackle tough jobs with our heavy duty pitman arm puller, designed for durability and precision when removing stubborn pitman arms in heavy-duty applications, ensuring a smooth repair process.

ApplicationThe pitman arm puller is specifically used to remove pitman arms on cars and light trucks 34 ton, also for bearings, collars, gears removal applications. Adjustable Forged JawsRugged and forged two jaws can be adjusted to fit various sizes and shapes, while two clamp bolts lock the tool in place for a slip-free grip during removal, pressure screw designed ball head for striking. High Quality The heavy duty bearing puller is built with high-grade carbon steel to withstand 10 ton pulling force. Ideal for high-torque repairs in professional garages or DIY projects, , ensuring safe removal without damaging shafts or splines. Easy to UseRemove the fastener nut from the pitman arm shaft, adjust the puller jaws and pressure screw, and secure the jaws with two clamping bolts. Then tighten the pressure screw against the shaft until the pitman arm is released, and remove it. 247 Customer Service We offer lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Please feel free to contact us if you have any questions.

Our 5-in-1 front end service kit includes 5 adjustable tools for a wide range of domestic and import vehicles, making it the perfect addition to any mechanic's toolbox.. Made from High-Quality zinc plated forged carbon steel, our tools are tough and durable enough to handle even the toughest jobs. Remove stubborn ball joints, tie rod ends, and pitman arms with ease.. Our tool set is universally compatible with a wide range of vehicles, making it the perfect pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. Our custom-molded ABS case is crafted from high-quality hard plastic, making it the perfect choice for amateur or professional mechanics on the go. Keep all your tools organized and secure in one convenient place.. At MT MoreTechData, we stand behind the quality of our tools. If you experience any issues, please don't hesitate to contact us. We want to ensure you're only getting the best tools for the job..

Wide application Nilight ball joint separator kit serves as a pitman arm remover, ball joint separator, and tie rod end puller, making it suitable for a wide range small domestic rear-wheel-drive vehicles, import vehicles, and light trucks. Robust Quality Made from heavy-duty forged steel and finished in oxide coating, heat treatment processes are employed to enhance the hardness of steel to a new level, enabling it to remove even the stuck or seized parts. Function Nilight front end service kit is engineered for quick and safe removal of ball joints, tie rods, pitman arms, eliminating the risk of damage commonly associated with hammers and pickle forks. It can significantly improve work efficiency, making it accessible to both novices and mechanics. Convenient Storage The ball joint tool is contained in a carrying case, design for quick storage and easy transportation. Protects all your tools while being user-friendly, making it perfect for on the go or for storing between jobs. Efficient Tool SetNilight front end service tool kit contains 22mm Ball Joint Separator, 27mm pitman arm puller, 33mm pitman arm puller, 19mm Tie Rod and Ball Joint Remover, and an outer tie rod remover tool. A must-have tool set for the task of vehicles maintenance.

For Pressed-On Harmonic Balancers Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers. Wide Application Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac 1988 - Newer, Chevrolet Trucks 2003 - Newer, Chrysler 1990, Ford 1995 - Newer, and Mitsubishi Eclipse 1995. Easy To Use Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process. Instructions Aand Storage Case Included Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case Easily take this harmonic balancer puller set from job to job. Product Specifications Includes Puller Body, 3-Jaw Puller, 3 Jaw Retaining Pins, 3 Wave Washers, 4 Pressure Screw Adapter Rods 4, 5-1332, 6-12, and 7-1332 Blow-Molded Carrying Case.

Designed for Tough Jobs Built to handle demanding tasks, this OEMTOOLS ball joint press kit heavy duty design is perfect for removing larger press-fit joints, making it ideal for trucks like the Ford F350-550 and Dodge Ram 2500-3500.. Extended C-Frame Reach The extra large ball joint press offers extended reach, accommodating larger adapters that standard presses can't handle, ensuring versatility for multiple vehicle types, including 4WD and Chevy trucks 2500-3500.. Heavy-Duty Construction This ball joint removal tool features a forged steel C-frame, providing the strength and durability needed for challenging jobs on vehicles like the Toyota Tundra and Tacoma trucks.. Versatile Adapter Compatibility Compatible with all OEMTOOLS ball joint press kits and adapter sets, this tool seamlessly integrates with various heavy duty ball joint press kit setups, ensuring it's ready for any ball joint removal job on trucks and SUVs.. Lifetime Warranty Protection Backed by a limited lifetime warranty, this ball joint press service kit provides peace of mind, ensuring reliable performance for professional mechanics and DIY enthusiasts alike..

Effortless Tie Rod Removal Engineered for professional and efficient removal of tie rods and Pitman arms in compact cars and light trucks, this tool significantly reduces effort and time.. Heavy Duty Construction Featuring a 2-116-inch yoke opening, dropped forged steel yoke, and a heat-treated pressure screw, this tool promises durability for heavy duty applications.. Universal Compatibility Designed to remove tie-rods on most cars and light trucks, offering a wide range of vehicle maintenance solutions for auto mechanics and DIY car enthusiasts.. Precision Engineered This tool's precision engineering ensures a snug fit and effective leverage for removing even the most stubborn tie rods and Pitman arms, making challenging tasks manageable.. Compact and Convenient Its compact design allows for easy storage and accessibility, making it a must-have in every mechanic's toolbox for quick and hassle-free maintenance tasks..

Versatile Suspension Tools Perform essential front-end maintenance tasks with pitman arm puller, ball joint separator, and tie rod removal tools, making it easy to work on various suspension systems without damaging components.. Heavy Duty Pitman Arm Puller Tackle tough jobs with our heavy duty pitman arm puller, designed for durability and precision when removing stubborn pitman arms in heavy-duty applications, ensuring a smooth repair process.. Comprehensive Ball Joint Kit Safely remove and install ball joints with our ball joint puller and ball joint separator tool kit, suitable for a wide range of vehicles, helping you complete jobs faster and more effectively.. Precise Tie Rod Tools Utilize our tie rod tool and tierod separator to efficiently remove and replace tie rod ends without causing damage, ensuring a secure fit and maintaining vehicle alignment during front-end repairs.. Durable Storage Case Keep your ball joint tools kit, pitman arm tool, and tie rod end removal tool organized and protected in the sturdy case, allowing for easy transport and quick access during automotive repairs..

1 ALL IN ONE FRONT END SERVICE KIT Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.. 2 HARDENED ALLOY CONSTRUCTION Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.. 3 UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.. 4 PROFESSIONAL PORTABLE ABS CASE The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.. 5 ORION MOTOR TECH PROMISE If any issues from our tools arise please dont hesitate to contact us. We guarantee the quality of our tools and want to ensure youre only getting the best. Because to do perform your best, you deserve the best, thats our Orion Motor Tech Promise..

MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications.. HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust.. COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles.. PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization.. 100 SALE SUPPORT -We back up all products for life, 247 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone.

EFFICIENT REMOVAL Designed for the effortless and safe removal of pitman arms on all heavy duty trucks weighing 2-tons and above, ensuring a seamless maintenance experience.. WIDE COMPATIBILITY Commonly found on class 3-8 trucks and equipment. For use with Ram 35005500, for use with Chevrolet 35005500, for use with Ford F-350550, for use with Isuzu NPR, for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc... SAFE PRECISE Featuring high strength pulling arms that adjust to accommodate various pitman arm widths, this tool eliminates the need for hazardous hammering or cutting torch methods, prioritizing mechanic safety and efficiency.. OPTIMIZED FOR IMPACT TOOLS Engineered for compatibility with a 12 inch impact tool, the Tiger Tool Pitman Arm Spreader ensures quick and effortless operation, significantly reducing labor time and enhancing productivity in the workshop.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

3 pieces front end service kit is designed for seperating ball joint, outer tie rod and pitman arm found on automotive applications.. The press scissor or cup design ball joint separator tool allows for ball joint removal without damage to joint and other parts often caused by hammers and pickle forks.. The durable heat-treated steel construction of this front end service kit fits a wide range of domestic and imported FWD vehicles for repair.. Information adjustable ball joint separator 78 20mm jaw spread, 1-18'30mm jaw force range adjustable up to 2-18'' 56mm ball joint separator jaw spread 253220mm, jaw force range to 1-151650mm conical pitman arm puller jaw spread 34''19mm, jaw force range to 1-3444mm. ATTENTION Please measure your ball joint of size before purchasing, and check the specifications of the Ball Joint Separator, whether it is suitable for your ball joint.

SPECIFICATIONS This tool has a 1 516-inch 33mm yoke opening and a 2 -inch throat depth and is designed to remove the Pitman arms from domestic cars and light trucks. The 38-inch drive square port in the center screw allows for the tool to be used with a 38-inch drive ratchet or flex handle for further ease of use. This puller includes a 9cm hex head screw with a head size of 19mm.. DESIGN CONSIDERATIONS Our 1 516-inch 33mm Pitman Arm Puller is designed to handle the toughest Pitman arm pulling jobs on passenger cars and light trucks. The yoke features drop forged construction and is heat treated for strength and durability, while the jaws are shaped to ensure a positive grip, keeping a solid grip while you work.. GET THE SET We offer a full range of front end service tools. The complete set can be found under ARES 70840. We've got the tools that you'll need to get the job done now. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Pitman Arm Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization..