100pcs 12 Rings- Copper crimps rings set include 100pcs 12 copper crimps rings, which can be used to connect PEX fittings and PEX pipes.. Premium Material-12 PEX copper crimp rings are made of a strong and sturdy copper, whose strength and resistance to corrosion make it an ideal material for plumbing applications. PEX copper crimp rings comply with ANSINSF-61, ASTM Standard F1807 and NSF372.. Crimping Tool Installation- You need to install the copper ring on the pipe, then insert the fitting into the pipe, slide the copper ring over the pipe, and use a crimping tool to tighten the copper ring.. Easy to Install- 100 pack PEX copper crimp rings can be easily installed without flame, flux, or solder, requires no bonding agents, glue, or solvents.. Wide Application- 12 PEX copper crimp rings are suitable for 12 PEX pipe and PEX fittings, they are used in potable water and hydronic heating water distribution..

CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 12 in., 34 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe. CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar. Compact design with wide grip handles. One-handed operation. Quick and easy disassembly. To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations. The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.

3 LOOP PEX MANIFOLD The Pex manifold is made of excellent PEX material, this non-barrier PEX pipe is non-toxic, maintenance-free, and anti-aging. Fit for radiant floor water and sprinkler systems only to keep quick uninterrupted hotcold water flows.. BALANCED FLOW The water flow of each branch of this water manifold pex can be adjusted individually so that the water flow of each channel will be balanced, and no water grab phenomenon will occur, thereby reducing energy consumption and achieving the purpose of energy saving.. STURDY AND RELIABLE The main body of this radiant heat manifold is made of metal, which is sturdy and reliable. The tube body of this manifold valve is demagnetized as a whole, does not absorb impurities, prevents internal clogging, and effectively extends the service life of the water separator longer than the life of the non-demagnetized water separator.. PREMIUM FLEXIBILITY The only connections are at the appliance and the PEX manifold with valves usually located in an airing cupboard or under a sink, etc. There are no joints under floorboards or inside walls. Safe, secure, and improved control over the building's plumbing.. WIDE APPLICATION 3 loop water manifolds with PEX Ball valves are widely used in gardens,water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc..

Directly from One of the Biggest Pex Systems Manufacturers.. EFIELD Pex-A PipeTubing 12 100 ft Blue Pex 12 100 ft Red Pex 200 ft Total with a Pipe Cutter. EFIELD Pex A is Most Flexible Tubing for Potable Water and Plumbing Application. The Pipe Can be Expand for the Connection. Recommended Connection For Full Water Flow Expansion Connection Need to Order Expansion Fitting and Rings, Tools as well. The Pipe is also Compatible with Barb Crimp, Clamp or Sleeve Connection. Meets Standards ASTM F876, F877, F1807, F1960, F2023, F2080 and F2169. Chemical Resistant - Pex Pipe Resist Against Chlorine.

Product Parameters6 loops1NPT main inletoutlet valves the thermometer is equipped with an integrated thermometer for Fahrenheit and Celsius, which is more convenient to observe the temperature all-copper globe valve core large-diameter pipelinethe maximum flow rate 1.4GPM.. High QualityThe radiant floor heating manifold kit is made of high-quality 304 stainless steel. The tube body is demagnetized and does not absorb impurities, which can effectively avoid internal blockage corrosion resistance, ensuring safe water use.. Visual Flow Meter Visually and accurately adjust the flow of each channel, and the flow of each channel can be adjusted to a consistent scale, so that the water flow of each channel is balanced, and there will be no water grabbing phenomenon.. Easy to InstallSimple installation steps, just use regular pliers or wrench to fix the main tube on the bracket, no PEX tools are required the radiant manifold kit includes heavy-duty stainless steel mounting brackets, making it easy to install on the wall.. All-Copper AdapterEquipped with 12 Adapter,Compatible with 12 PEX pipe 12 pcs all-copper floor heating pipe adapter joint, independent valve core, high-quality sealing ring, more firm and tighter easy to disassembly,more convenient to replace and clean..

CENTRALIZED CONTROL The PEX manifold enables centralized management of all household water lines by integrating hot and cold water circuits through a unified manifold. Whether it's kitchen, bathroom, or balcony water points, you can conveniently manage any fixture throughout your home without shutting off the entire house. Independent shut-off valves and flow regulation via the manifold significantly simplify future maintenance, making household water management clearer and more efficient. Pex Manifold System 50143 PEX Manifold compatible with Viega Manabloc, suitable for crimping and PEX crimping systems. There are two methods for supplying hot and cold water to the Water Manifold with Valve, each requiring a different number of supply adapters. If the third port is not used for connection, it can be sealed with an end cap. Note Supply adapters are not sold with the water manifold. ASSEMBLY Each Pex Manifold shipment includes an installation manual. For ports connecting to your supply line fittings, ensure the pipe is secure before tightening the fitting assembly. Once the pipe and threaded fitting are secured, use a crimping tool to directly crimp onto the port adapter on the Pex Manifold. If you have unused ports or wish to reserve them for future system expansion, use the valve T-handle to turn the port valve to the Closed position. PEX Manifold Includes Accessories pex manifold with valves1, featuring built-in shut-off valves for independent control of each water outlet. Port Adapters14, compatible with PEX pipe sizes 34 and 1. T-handle valves2 manually control water flow. Supply end cap3. Color-coded labels1 distinguish cold water blue and hot water red lines, enabling quick identification during installation and clear maintenance later. IMPORTANT NOTICE The maximum pressuretemperature rating for the PEX manifold with valves piping system is 100 psi 180F. Excessive pressure applied to the water manifold may cause leakage. Do not allow chemicals such as PVC glue or flux to come into contact with the water manifold. They will compromise the integrity of the water manifold and lead to leaks.

Product Parameter This radiant heat manifold features 5 branches,1NPT main inletoutlet valves,up to 1.4 GPM high flow meter.Each kit includes a flow meter, automatic exhaust and drain valves, 12 adapter, temperature control handwheel, Celsius Fahrenheit integrated thermometer,making it an ideal choice for efficient radiant floor heating systems.. High QualityYUFUYEK pex tubing manifold is made from durable 304 stainless steel,built to withstand corrosion and pressure, while boosting thermal conductivity and ensuring better sealing, faster heating and insertion into plastic pipework.. Easy to install The pex tubing floor heating manifold comes with all-in-one accessories and clear instructions for an easy installation process.Built in heavy-duty stainless steel mounting bracket, can be easily installed on any wall. simply use regular pliers or adjustable wrenches to connect the PEX tube to the manifold. Pressure tested and pre-assembled for peace of mind.. User friendly design This floor radiant heating manifold is equipped with a visual flow meter shut-off valve on the inlet branch, which can achieve balanced water flow control in each circuit and prevent water absorption. This hydraulic glass radiation manifold has a flow rate of up to 5Lmin, providing fast and efficient heating, bringing a warm and comfortable experience to your entire space.. Efficient Heating The radiant heat manifold efficiently distributes heat from a single source to multiple rooms or zonesthis hydronic radiant heat manifold ensures consistent and even heat distribution across your entire space. YUFUYEK radiant heat pex plumbing manifold is suitable for both residential and commercial applications, delivering dependable performance and optimal heating efficiency..

DIRECT REPLACEMENT14-Port 8 Cold 6 Hot PEX Water Distribution Manifold, perfectly compatible with viega manabloc systems and standard homerun plumbing setups in small to medium-sized residential homes. Integrated branch shut-off valves enable independent control of each water outlet, allowing targeted maintenance e.g., fixing leaky faucets without shutting off the entire house water supply, eliminating family inconvenience. ZERO-LEAD POLY ALLOY FOR SAFE DRINKING WATERCrafted from high-grade zero-lead poly alloy material, featuring 34-inch main inlet and 12-inch PEX crimp connections that meet strict drinking water safety requirements. The corrosion-resistant and chlorine-resistant body prevents sediment buildup, rust, and damage from harsh water conditions including hard water, ensuring safe water quality and long-term leak-proof performance for years of reliable use. COLOR-CODED PORTS HASSLE-FREE INSTALLATION Each port is clearly marked with red hot water and blue cold water color coding, plus embossed labels for permanent identification, significantly reducing installation errors for both professional plumbers and DIY enthusiasts. Pre-assembled design fits all standard PEX crimp tools no extra valve purchases needed, cutting down installation time and labor costs. COMPLETE ACCESSORY KIT INCLUDED Package comes with 1 x 50143 PEX Manifold with built-in valves, 14 x Port Adapters, 3 x Supply End Caps for sealing unused ports, 2 x T-Handle Valves for manual main flow control, and 1 x Color-Coded Label Sheet. Unused ports can be easily sealed for future system expansion, enhancing versatility. DURABLE DESIGN WITH SAFETY ASSURANCE Withstands maximum 100 PSI water pressure and temperature range of 33F to 180F, suitable for both hot and cold water distribution systems. Important Note Avoid contact with PVC glue, flux, or other corrosive chemicals to prevent manifold damage and leakage. Compact and organized port layout saves space in utility rooms or crawl spaces, ensuring easy integration into tight plumbing enclosures.

SHARKBITE EXPANSION MULTI-PORT TEE Multiport tees are designed to connect PEX-A pipes to supply multiple water lines expansion fittings form connections that grow stronger over time. Requires PEX expansion tool and expansion rings to make connection. COMPATIBILITY This expansion tee is compatible with PEX-A pipes only suitable for domestic hot and cold water service lines, burial applications including concrete, and radiant heating systems. DURABLE These PEX-A expansion fittings are made from high-quality Acudel Polymer for long-lasting reliability feature an elastic memory that provides flexibility and protects against kinking and corrosion to ensure a tight, and leak-proof connection. EASY TO INSTALL Multi-port tee fitting allows for quick and easy installation with expansion ring and PEX tubing. Use expansion tool to insert and hold fitting in place until the expansion ring and tube contracts tightly to ensure proper and quick installation No solder or bonding agents required. CERTIFIED This poly multi-port tee meets ASTM F-1960 and ASTM F-877 standards for product safety. Expansion manifolds are compatible with all PEX-A tubing of the same size from any manufacturer..

Product Parameter4 loops,1 NPT supply and return shut-off ball valves,up to 1.4GPM high flow meter,12 adapters included8 pcs.. High QualityABST PEX radiant manifold is made of high-quality 304 stainless steel material,which is wear-resistant,anti-corrosion,pressure-resistant,and has a higher thermal conductivity,transmitting heat more effectively.. Easy to InstallThe floor heating manifold kit is equipped with a stainless steel mounting bracket,which can fix the water distributor on the wall or the box.Simply use regular pliers to install the main on the bracket and connect the inlet and outlet main valves to the automatic exhaust and drain valves.Pressure tested and pre-assembled for peace of mind.. Auto Drain ExhaustThere is more gas in central heating,and the use of automatic exhaust and drain valves can effectively remove the gas in the pipe,increase the flow,and improve the heating effect.. PEX Radiant Heat Manifold KitEach kit includes flow meter,auto exhaust drain valve,12adapters,temperature control handwheel,centigrade fahrenheit integrated temperature gauge,inletreturn water valve..

PIPE COMPATIBILITY This pex ice maker outlet box is ONLY compatible with crimp pex fitting system, NOT compatible with expanding fitting system. The box is equipped with a 14-turn shut off valve The inlet works well with 12 inch PEX B pipes the outlet fits well with 14 inch compression ice maker hoses.. LONG LASTING The shut off valve of pex ice maker outlet box is forged from solid brass that delivers high corrosion and abrasion resistance percentage. It is excellent for pipe fitting system as it can withstand long period of wear and tear.. VERSATILE APPLICATIONS SUNGATOR pex ice maker outlet box allows for inverted installation and provides solutions for a range of residential ice makers, refrigerators, and water dispenser applications. It features a recessed design and features a snap on frame which accommodates to drywall.. SAFE TO USE SUNGATOR pex ice maker outlet box conforms to American standards meets cUPC and NSF requirements. The shut off valves are made of premium brass, which is safe for water distribution.. PACKAGE INCLUDES Pex Ice Maker Outlet Box1 Clamp2..

Includes 12 and 34 Connectors Compared with others, our PEX radiant manifold includes two types of connectors, which are compatible with 12 and 34 PEX tubing outlets, no need to purchase an additional 34'' connector. Great for radiant floor heat systems.. 3-Step Installation Simply use regular pliers to install the main on the bracket and connect the inlet and outlet main valves to the automatic exhaust and drain valves. The PEX tubing floor heating manifold comes with all-in-one accessories and clear instructions for an easy installation process. Even non-professionals can handle the installation, saving time and labor costs.. User Friendly Design This floor radiant heating manifold is equipped with a visual flow meter shut-off valve on the inlet branch, which can achieve balanced water flow control in each circuit and prevent water absorption. This hydraulic glass radiation manifold has a flow rate of up to 1.4GPM, providing fast and efficient heating, bringing a warm and comfortable experience to your entire space.. All In One PEX radiant manifold is made of high-quality 304 stainless steel material, which is wear-resistant, anti-corrosion, pressure-resistant, and has a higher thermal conductivity, transmitting heat more effectively.. Efficient Heating Starts Here The PEX manifold is suitable for radiant heating system, connected with coldheat source, and plays the role of zone temperature control. The radiant heat manifold efficiently distributes heat from a single source to multiple rooms or zones, and it ensures consistent and even heat distribution across your entire space. It is suitable for both residential and commercial applications, delivering dependable performance and optimal heating efficiency..

Proven quality and non-corroding. Reduced flow noise. Excellent chlorine resistance. PolyAlloy port adapters. Homerun distribution manifold.

Directly from One of the Biggest Pex Systems Manufacturers. 10 Pieces 12 Inch Pex Brass Full Port Shut-off Ball Valve Hot and Cold Red and Blue Handle. Certified with ASTM F1807 NSFANSI 61. Resistant to Corrosion Due to DZR Brass. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Compatible with all types and brands of Pex Tubing.

Directly from One of the Biggest Pex Systems Manufacturers. 10 Pieces Lead Free Brass 12 Inch Pex x 38 Inch OD Compression with 14 Turn onoff. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Compatible with all Types and Brands of Pex Tubing. Certified with ASTM F1807 NSFANSI 61.

Multidirectional Connector4 ways brass pex adapter can connecting 4 pipes from different directions. Fit for extending pipelines and changing the lines of connections.. Premium MaterialHigh-quality brass, resists corrosion, rust and high temperature.. Compatible ProductsUse with stainless steel clamp rings, or PEX Crimp tool and copper rings. Not included. Easy to InstallThis cross pex fittings can be easily installed without flame, flux, or solder, requires no bonding agents, glue, or solvents.. Wide ApplicationThis brass crimp fitting can be used for PEX pipes in plumbing jobs..

Equipped with a 12 inch Crimp Pex inlet and 14 inch OD compression outlet connections. The Snap-on faceplate dimensions are 6-12 inch x 5 inch. The rough Opening is 5 inch x 3-12 inch x 2-34 inch. The box with one-piece box-and-flange design, no additional support framing required. Pre-installed 14 turn brass valve complies with NSF 61-G RequirementsPortable Water Standard..

This Efield Product is Compatible with all Types of Brands of Pex A PipeTubing. Meet the Standard F1960 Certified to ANSINSF-61 and ASSE 1061 Product Standard. This Efield Product is Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Pack of 10. Only for Pex A PipeTubing Fitting Connection.. Need to Order Expander tool Pex Sleeves Ring Separately.

49224 38 PolyAlloy Press x MANABLOC Port Adapter Lead Free. 49234 12 PolyAlloy Press x MANABLOC Port Adapter Lead Free. 50023 38 PolyAlloy Crimp x MANABLOC Port Adapter Lead Free. 50133 12 PolyAlloy Crimp x MANABLOC Port Adapter Lead Free.

Equipped with 12 inch Expansion Pex-A Inlet and 34 inch Male Hose ThreadMHT Outlet Connections. Lead Free 14-Turn Hot and Cold Ball Valve with Water Hammer Arrestors Installed. Both Central and Side Drain Design Measures 9.25 inch x 3.5 inch x 8 inch. Includes a Pre-installed Support Bracket, a Faceplate Cover. Expansion Pex-a Conncetion need the tool to install. Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp Copper Crimp Ring Systems.

10 Pieces 12 Pex-a Expansion Copper Stub Out Elbows with Wall Flange. Compatible with all Types of Pex-A Tubing. The Stub-out Length is 6 inch Pex-A Expansion Connection. Need the Expansion Tool and Expansion Rings to Install The Flange with Pre -Drilled Holes for Easy Installing. Lead Free. This Efield Product is Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp Copper Crimp Ring Systems.

SHARKBITE EXPANSION REDUCING TEE Expansion fitting allows you to join PEX-A pipes of the same sizes quickly and easily. PEX-A systems can handle higher pressure and temperature variations Requires PEX expansion tool and expansion rings to make connection. COMPATIBILITY This expansion tee is compatible with PEX-A pipes only suitable for domestic hot and cold water service lines, burial applications including concrete, and radiant heating systems. DURABLE PEX-A expansion fittings are made from high-quality plastic for long-lasting reliability feature an elastic memory that provides flexibility and protects against kinking and corrosion expansion fittings form connections that grow stronger over time. EASY TO INSTALL Expansion Fittings allow for quick and easy installation with expansion ring and PEX tubing. Use expansion tool to insert and hold fitting in place until the expansion ring and tube contracts tightly to ensure proper installation No solder or bonding agents required. CERTIFIED This expansion poly reducing tee meets ASTM F-1960 and ASTM F-877 standards for product safety. Expansion manifolds are compatible with all PEX-A tubing of the same size from any manufacturer.

Directly from One of the Biggest Plumbing Systems Manufacturers. 12 inch Barb Crimp Pex F1807 Connection Inlet x 34 inch MHT Outlet Connections. 14-turn Hot and Cold Shut off Ball Valve, Lead Free Brass. Measures 9 inch x 7.8 inch For Frame Panel, The Depth is 4.23 inch. Features a Snap-on Frame Up to 1 inch Drywall.

1 female sweat x male sweat. 10-14 length. With four 12 Pex ball valve branches. 2 o.c. Combine for as many branches as are needed.

Directly from One of the Biggest Plumbing Systems Manufacturers. 2 Piece Closed Manifold 34 Trunk, 12 Port 3 Ports Poly PPSU Barb Crimp Pex Fittings, Lead Free. This Efield Product Suits with all Types and Brands of Pex Tubing. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Made of PolyPPSU, Better Performance than Brass Manifold in RO, Chlorinated Water Application.

Directly from One of the Biggest Plumbing Systems Manufacturers. 2 PCS Manifolds 34 Trunk, 12 Port 2 Ports Open Poly PPSU Barb Crimp Pex Fittings, Lead Free. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems and All Types and Brands of Pex Tubing. Made of PolyPPSU, Better Performance than Brass Manifold in RO, Chlorinated Water Application. ASTM F2159 NSFANSI 61 NSF 372 Certified.

Directly from One of the Biggest Plumbing Systems Manufacturers. 2 PCS Manifold 34 Trunk, 12 Port 4 Ports Open Poly PPSU Barb Crimp Pex Fittings, Lead Free. This Efield Product Suits with all types and brands of Pex Tubing. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. ASTM F2159 NSFANSI 61 NSF 372 Certified.

Directly from One of the Biggest Plumbing Systems Manufacturers. Open 4 Port Opposing Open Poly PPSU Pex Crimp Manifold 34 Trunk, 12 Port 4 Ports , Lead Free. Suits with all Brands of Pex Tubing. Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Made of PolyPPSU, Better Performance than Brass Manifold in RO, Chlorinated Water Application. NSFANSI 61 NSF 372 Certified..

Compatibility The SD-F1960 expansion tool is designed to expand Type PEX-A tubing for insertion into ASTM F1960 expansion fittings, ensuring versatility across a wide range of fittings, making it the ideal choice for professionals.Note Not applicable to PEX-B tubing.. Complete Kit, Robust Construction This pex expansion tool set provides all the essentials for efficient operation. It comes with 3 expansion heads 12, 34, and 1 and a tube cutting tool for accurate results. Each component is expertly engineered from high-strength aluminum alloy, offering exceptional durability, lightweight maneuverability, and ease of use in confined areas.. Effortless Use This manual pex expander is built from lightweight aluminum alloy, allowing for smooth operation in tight or elevated spaces. The cone is crafted from chrome-plated spring steel, providing exceptional weather and corrosion resistance.. Flexibility and Ease This mechanical pipe expander tool is designed for versatility, making it perfect for various applicationsfrom residential plumbing to commercial and industrial setups. It includes a robust carrying case, ensuring all components stay organized and easily transportable for work on the move.. Eco-Conscious Lubricant Provided We prioritize environmental responsibility by including a premium, eco-friendly lubricant with this set. It ensures a smoother, more efficient expansion process while being gentle on both the user and the planet..

HIGH-QUALITY PPSU MATERIAL PEX-A expansion fittings are made from durable Polyphenylsulfone PPSU for long-lasting performance. Compatible with all Type A PEXPERT tubing designed for F1960 expansion connections. Meets NSF and ASTM F1960 standards.. FOR PLUMBING HEATING SYSTEMS Poly alloy PEX-A fittings are ideal for potable water systems, radiant heating, retrofit construction, and hot or cold water distribution. Resistant to corrosion, mineral buildup, rust, and freeze damage.. EASY EXPANSION INSTALLATION Designed for use with PEX-A expansion ring connection systems using a PEX expansion tool. NOT compatible with stainless steel clamp or copper crimp ring systems. Compatible with all brands of PEX-A tubing only.. PACKAGE CONTENTS Includes1x Pex-A Expansion Poly PPSU Manifold 34 Trunk, 12 Ports, fittings for PEX-A plumbing systems. NOTE Expansion tool and PEX expansion ringssleeves are NOT included and must be purchased separately.. WARRANTY SUPPORT 12-month warranty from the date of purchase. Free returns within 30 days with no questions asked..

1. Product Parameters 10 pcs 34'' G to 12'' PEX manifold connectors included, applied to serve as tube connections on PEX radiant manifolds.. 2. Quality Material brass pex ends, nickel-plated copper nuts, PEX manifold adapters feature high temperature and wear resistant.. 3. Compatible Manifold brass 34'' G to 12'' PEX manifold adaptors are compatible with AB, WiseWater 2-12 loop manifolds.. 4. Replacement Fittings radiant manifold adaptors is designed as piping fittings to connect the branch outlet to the piping, also ideal to replace the branch port fittings.. 5. Good Sealing the pex end of radiant manifold tubing nuts is added gaskets, brass clamps equipped to fix the pipeline, without the need for additional sealing rings ..

Product Parameters 10 pcs 34'' G to 58'' PEX manifold connectors included, applied to serve as tube connections on PEX radiant manifolds.. Quality Material brass pex ends, nickel-plated copper nuts, PEX manifold adapters feature high temperature and wear resistant.. Compatible Manifold brass 34'' G to 58'' PEX manifold adaptors are compatible with AB, WiseWater 2-12 loop manifolds.. Replacement Fittings radiant manifold adaptors is designed as piping fittings to connect the branch outlet to the piping, also ideal to replace the branch port fittings.. Easy Connection the PEX manifold tubing nuts are easy to use and can be installed in just a few minutes..

Premium QualityPex Radiant Manifolds are made of durable stainless steel material, which is corrosion-resistant and pressure-resistant and has higher thermal conductivity, faster heating and insertion into plastic pipes.. All In OneEach radiant heat manifold includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valvemanual wheel for supply and return trunks.. Easy For InstallationHeavy duty stainless steel mounting bracket is included makes it attachable to any wall easily. No PEX tools requiredJust use regular pliers or adjustable wrench to connect PEX tubing to the manifold. Pressure tested and pre-assembled. Simply mount the manifold on brackets and connect valves and PEX tubing.. Product Parameter3 loops with 1 extra drain and cap, 1 FPT supply and return, up to 1.4 GPM high flow meter. 12 PEX adapters included, can be replaced by 34 adaptersnot included, great for radiant floor heat systems.. 100 Satisfaction ServiceWe provide premium quality as well as 100 Satisfaction Service, please feel free to contact us if you have any question about out product..

Package Includes Pex B Fittings Combo includes 12pcs 12 PEX Elbows, 12pcs 12 PEX Tees, 12pcs 12 PEX Couplings. Non-Pollution Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSFANSI 61 Certified. Extra-Long Service Life High-quality brass pex 90 degree elbow tee coupling, resists corrosion, rust and high temperature 32200.. Applications This brass crimp PEX fitting can be used ONLY for PEX B pipes in plumbing jobs. Great for hot or cold water distribution and and hydronic heating systems in your home, in warehouse or in RV.. Compatible Products Use with Stainless Steel Clamp Rings or PEX Crimp Copper Rings. Clamp rings are not included in this set.. Warm Tips NOT Compatible with UPONORWirsbo EXPANSION SYSTEM PB TUBE. NOT for PEX A pipes ONLY for PEX B pipes.

Meet ATSM F1807. With high quality made from tool steel,come with free GO NO GO Gauge. Simply pull back on the handles to open the jaws and crimp away. Fantastic Head design help you reach into tight connection and make the pipe installation easier.. Perfect polishing ensure no damage for copper ring.

Supply adapters are a 1 special Viega thread- only Viega brand supply adapterscaps may be used. The use of any other pipe fitting at these connections will strip the threads . Options include 50141 1manabloc thread x 34 pex crimp supply adapter Lead Free 50063 1 manibloc thread end cap..

Solid Copper Construction made from quality solid copper, this 3 port Lf tee manifold offers durability, corrosion resistance, and long service life for residential and commercial plumbing systems. 6 Port Closed Tee Manifold Design features one 34 inch inlet and six 12 inch outlets, allowing efficient water distribution from a main line to multiple branch lines while maintaining stable flow. Crimp Connection System designed for crimp style connections, compatible with standard copper crimp rings and crimp tools, ensuring a secure, leak free connection. Compatible with Pex PE-rt Tubing fully compatible with PEX and PE-RT plumbing systems, making it ideal for potable water, radiant heating, and general plumbing applications. Ideal for Manifold Branch Plumbing Applications ideal for use in plumbing manifolds, water distribution systems, remodeling projects, and new installations where multiple outlets are required from a single supply line.

SHARKBITE MULTI-PORT TEE Multi-port tee with outlets is designed to supply multiple water lines. COMPATIBILITY SharkBite straight coupling plumbing fittings work well with PEX, copper, CTS, CPVC, and PE-RT pipes in any combination. EASY TO INSTALL This 6-port closed multi-port tee allows for quick and easy installation, with no tools, crimping, glue, or soldering required. LINER No loose components with SharkBites' tube liner and easy to create a dependable secure connection. SPECS Plumbing fittings feature a minimum working temperature of 33 degrees F at 160 PSI, and a maximum working temperature of 200 degrees F at 80 PSI.

INSTALLS IN SECONDS PEX water manifold requires no soldering or glue Just push to create a watertight seal. LINER No loose components with SharkBites' tube liner, nothing to lose and easy to create a dependable secure connection. COPPER, PEX, CPVC SharkBite straight coupling plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination. EXPANDABLE and FLEXIBLE Simple Connect multiple manifolds together using SharkBite PEX Fittings. LEAD FREE All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

PLUMBING MANIFOLD SYSTEM PEX manifold allows for central control for all water lines throughout the home corrosion-resistant fitting certified for use in potable water systems. COMPATIBILITY The water manifold with valves is ideal for use with PEX and PE-RT pipes. NO TOOLS REQUIRED Plumbing manifold with valves can be easily attached to PEX pipes using copper crimp rings or stainless steel clamps, with no additional tools, glue, or soldering necessary. DURABLE PEX manifold is composed of strong and sturdy Acudel Polymer material. SPECS Plumbing fittings feature a minimum working temperature of 33 degrees F at 160 PSI, and a maximum working temperature of 200 degrees F at 80 PSI.

PLUMBING MANIFOLD SYSTEM PEX manifold allows for central control for all water lines throughout the home corrosion-resistant fitting certified for use in potable water systems. COMPATIBILITY The water manifold with valves is ideal for use with PEX and PE-RT pipes. NO TOOLS REQUIRED Plumbing manifold with valves can be easily attached to PEX pipes using copper crimp rings or stainless steel clamps, with no additional tools, glue, or soldering necessary. DURABLE PEX manifold is composed of strong and sturdy Acudel Polymer material. SPECS Plumbing fittings feature a minimum working temperature of 33 degrees F at 160 PSI, and a maximum working temperature of 200 degrees F at 80 PSI.

Directly from One of the Biggest Pex Systems Manufacturers. 2-Pack 3 Ports Closed Opposing Manifold 34 Trunk, 12 Port 3 Ports Poly PPSU Pex-A Expansion Fittings. Suits with all Brands of Pex Tubing, Lead Free, NSFANSI 61 NSF 372 Certified.. Compatible with ONLY Expansion Ring Systems and All Brands of Pex-A Tubing. Made of PolyPPSU, Better Performance than Brass Manifold in RO, Chlorinated Water Application.

Directly from One of the Biggest Plumbing Systems Manufacturers. 2 Pack 6 Ports Closed Pex-A Expansion Poly PPSU Manifold 34 Trunk, 12 Ports, Lead Free. Made of PolyPPSU, Better Performance than Brass Manifold in RO, Chlorinated Water Application. Compatible with all Types of Brands of Pex A PipeTubing Expanding Connection. Compatible with Expanion Fitting System, NOT Compatible with Stainless Steel Clamp Copper Crimp Ring Systems. Certified with ASTM F1960 NSFANSI 61 NSF 372,Safe for Potable Water.

10pcs 34 Valves- 34 brass PEX ball valve set includes 5 pack 34 red PEX brass full port shut off ball valve and 5 pack 34 blue PEX brass full port shut off ball valve. They are suitable for circulating heating and water distribution.. Durable Brass- 10pcs PEX brass full port shut off ball valves are made of durable brass, red and blue handles are used for distinguish hot and cold water applications. They are certified with ASTM F1807 NSFANSI 61.. Long Service Life- 34 full port shut off ball valve can be used for PEX pipes in plumbing jobs. and they resist corrosion, rust and durable for use. Their maximum pressure is 400 PSI.. Easy to Install- 10pcs 34 brass PEX valves can be easily installed without flame, flux, or solder, requires no bonding agents, glue, or solvents, they are suitable for stainless steel clamp copper crimp ring systems and they are NOT suitable for expander fitting System and uponorwirsbo expander system. Wide Application- 34 PEX brass full port shut off ball valves are suitable for all types and brands of PEX Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc. NOTE They are NOT suitable for PEX-AL-PEX tubing..

PRODUCT PARAMETER3 LOOPS,Heat can be transmitted 30-45 square meters.1 NPT supply and return shut-off ball valves,SUS 304 stainless steel cold forming, corrosion resistance, no rust, better sealing, more precise control, the main tube is not demagnetized as a whole, longer life than demagnetization tubes, and higher hardness. VISUAL FLOW METERThe water inlet branch is equipped with a visual flow meter type shut-off valve, which can accurately adjust the water flow of each channel and prevent the branch from grabbing water. Just open the red cap and turn the red base to adjust the water volume of each channel to 0-5 litersmin. Effectively ensure the hydraulic balance of each road. AUTO EXHAUST VALVEAutomatic exhaust valve, in a continuous automatic manner, Eliminates the air inside when the system is filled with water and during operation.A hygroscopic vent cap prevents accidental drips. ALL-COPPER NICKEL-PLATED HEXAGONAL LOWER JOINT All-copper material, nickel-plated treatment, anti-corrosion and durable, standard 6-point thread, 12 adapter, suitable for PERT PEXD and other floor heating pipes with an inner diameter of 12MM and an outer diameter of 16MM, professional thread sealant, Reinforcement double seal to lock water. EASY TO DISASSEMBLEEach part can be replaced and disassembled separately, the stainless steel body can be used for a long time, the internal space is large, and the flow is sufficient. It is a cost-effective water distributor, which is widely used in floor radiant heating systems, but not suitable for drinking water applications.

CENTRALIZED CONTROL The PEX manifold enables centralized management of all household water lines by integrating hot and cold water circuits through a unified manifold. Whether it's kitchen, bathroom, or balcony water points, you can conveniently manage any fixture throughout your home without shutting off the entire house. Independent shut-off valves and flow regulation via the manifold significantly simplify future maintenance, making household water management clearer and more efficient.. Pex Manifold System 49615 PEX Manifold compatible with Viega Manabloc, suitable for crimping and PEX crimping systems. There are two methods for supplying hot and cold water to the Water Manifold with Valve, each requiring a different number of supply adapters. If the third port is not used for connection, it can be sealed with an end cap. Note Supply adapters are not sold with the water manifold. ASSEMBLY Each Pex Manifold shipment includes an installation manual. For ports connecting to your supply line fittings, ensure the pipe is secure before tightening the fitting assembly. Once the pipe and threaded fitting are secured, use a crimping tool to directly crimp onto the port adapter on the Pex Manifold. If you have unused ports or wish to reserve them for future system expansion, use the valve T-handle to turn the port valve to the Closed position.. PEX Manifold Includes Accessories pex manifold with valves1, featuring built-in shut-off valves for independent control of each water outlet. T-handle valves2 manually control water flow. Supply end cap3. Color-coded labels1 distinguish cold water blue and hot water red lines, enabling quick identification during installation and clear maintenance later.. IMPORTANT NOTICE The maximum pressuretemperature rating for the PEX manifold with valves piping system is 100 psi 180F. Excessive pressure applied to the water manifold may cause leakage. Do not allow chemicals such as PVC glue or flux to come into contact with the water manifold. They will compromise the integrity of the water manifold and lead to leaks..

CENTRALIZED CONTROL The PEX manifold enables centralized management of all household water lines by integrating hot and cold water circuits through a unified manifold. Whether it's kitchen, bathroom, or balcony water points, you can conveniently manage any fixture throughout your home without shutting off the entire house. Independent shut-off valves and flow regulation via the manifold significantly simplify future maintenance, making household water management clearer and more efficient. Pex Manifold System 50243 PEX Manifold compatible with viega Manabloc, suitable for crimping and PEX crimping systems. There are two methods for supplying hot and cold water to the Water Manifold with Valve, each requiring a different number of supply adapters. If the third port is not used for connection, it can be sealed with an end cap. Note Supply adapters are not sold with the water manifold. ASSEMBLY Each Pex Manifold shipment includes an installation manual. For ports connecting to your supply line fittings, ensure the pipe is secure before tightening the fitting assembly. Once the pipe and threaded fitting are secured, use a crimping tool to directly crimp onto the port adapter on the Pex Manifold. If you have unused ports or wish to reserve them for future system expansion, use the valve T-handle to turn the port valve to the Closed position. PEX Manifold Includes Accessories pex manifold with valves1, featuring built-in shut-off valves for independent control of each water outlet. Port Adapters24, compatible with PEX pipe sizes 34 and 1. T-handle valves2 manually control water flow. Supply end cap3. Color-coded labels1 distinguish cold water blue and hot water red lines, enabling quick identification during installation and clear maintenance later. IMPORTANT NOTICE The maximum pressuretemperature rating for the PEX manifold with valves piping system is 100 psi 180F. Excessive pressure applied to the water manifold may cause leakage. Do not allow chemicals such as PVC glue or flux to come into contact with the water manifold. They will compromise the integrity of the water manifold and lead to leaks.

Equipped with 12 inch Pex-a Expansion Inlet and 34 inch Male Hose ThreadMHT . Both Central and Side Drain Design. Measures 9.25 inch x 3.5 inch x 8 inch Includes a Pre-installed Support Bracket, a Faceplate Cover. Lead Free 14-Turn Hot and Cold Brass Ball Valve. with Stainless Steel Water Hammer Arrestors Installed. Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp Copper Crimp Ring Systems.

Product Parameters 5 loops,1 NPT supply and return shut-off ball valves,adjustment range of 0 5L min,12 adapters included.. Visual Flow Meter the inlet branch has a visual flow meter type shut-off valve it can precisely adjust the water flow in each circuit to prevent water grabbing from the branch pipe.. Component Features return branch with spring-loaded temperature control spool can be dismantled to install electric actuator. Optional inlet and return mains valve at the front and manualautomatic exhaust valve at the end. Drain valve, bracket for fixing the manifold to the box or wall.. Auto Exhaust Valve Automatic exhaust valve, in a continuous automatic manner, Eliminates the air inside when the system is filled with water and during operation.A hygroscopic vent cap prevents accidental drips.. Fine Processing the main port is designed with longer threads for a more solid connection, 18mm deep.SUS 304 stainless steel, corrosion resistant, rust proof, high life expectancy, brushed surface, durable, no matter how long it is used, the surface remains as clean as new..

Superior DurabilityThe washing machine outlet box and valve are UPC certified,which get high Impact,non-corrosive plastic for long-lasting reliability.And 14-turn hot and cold shut off ball valve made of lead free brass,that is resists corrosion,rust,and high temperature.. Function DesignGUOFIS washing machine outlet box features both central and side drain design,which provide a convenient water drain function for washing machines.. Easy InstallationThe washing machine outlet box is designed for recessed residential applications,that is used for all kinds of washing machines.And box and frame can be separated for a flexible layout,allow for inverted installation.Fast and strong and mounting.. Product MeasurementWashing machine outlet box measures 9.25 inch x 3.5 inch x 8 inch.Equipped with 12 inch pex crimp inlet and 34 inch MHT outlet connection.Insalled with 14 inch turn ball valve and stainless steel water hammer arrestor.. Package IncludeIncludes a pre-installed support bracket,a faceplate cover.This box is designed as a termination point for all drain and water connections necessary when installing a washing machine,to provide quick,safe,water supply shut-off access..

High quality Made of lead-free brass, with excellent reliability and strength, suitable for residential applications.. Compatible Hourleey hot and cold PEX ball valves are compatible with all 12 PEX pipes.. Application scenario Designed for circulating heating and drinking water distribution. Approved to be used underground and behind walls without access panels.. Size 12 Pex, maximum pressure is 400 PSI, package include 10 Pieces Pex Brass Full Port Shut Off Ball Valve HOT AND COLDRed and Blud Handle.. Good service reply online within 24 hours, if you have any questions, we will serve you at any time..

PC-CRP1096 is a versatile PEX clamp tool kit in a handy carrying case. This 33-piece PEX crimping tool set allows to make secure connections to PEX tubing with stainless steel PEX clamp rings in sizes 38, 12, 58, 34 and 1.. Patented PEX clamp tool CRP-1096 is highlighted with PEX clamp cinching removal functions in one tool, allows for the installation of PEX clamp rings onto PEX barb fittings and allows fittings to be re-used.. PEX clamp rings included 12-in20-Pack 34-in10-Pack are corrosion-resistant and finished to offer long-lasting strength. For use with brass or poly PEX crimp fittings. NSF certified.. PEX tubing cutter cuts through up to 1 inch PEX tubings like butter.. Meets ASTM F2098 standard..

UNIVERSALThis tool meets ASTM 2098 standard will work with stainless steel clamps from any manufacturer to make PEX connections from 38-inch to 1-inch. It can also be used to cinch single ear hose clamp,as long as the ears lengthwidth is within the opening range of the jaws.. INNOVATIVENew design makes it be a multi-function tool which can cinch clamps and remove the clamps from pipe to allow re-using the pipe fittings,cost-effective and convenient.. DURABLEThe cinchremove tool is constructed of durable high-quality steel with forging process to ensure integrated mechanical property and long service life,and inside of the jaw is processed with Wire EDM Cutting to ensure the precision.. EASYIts easy to switch cinch and remove function.And the ratcheting design and self-release mechanism makes the cinch effortless.The tool is factory-adjusted with no requirement for calibration tool.. ALL-IN-ONEThis is a All-in-one kit for pex pipe installation, it includes 1pc of cinchremove tool,1pc of Pex cutter,20pcs of 12-inch clamps and 10pcs of 34-inch clamps..

Material Lead-Free brass and polly alloy construction. Which is corrosion resistance, no leaking, ductility at high temperature and low magnetic permeability and in the same time Which make it much more healthy for human. Design certified to ANSINSF-61 and ASSE 1061. ApplicationPEX Compatible with all types and brands of PEX B Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc.It connects PEX supply lines to parallel water system,well made and work great.. Installation There are three adpters which're needed to install on the manifold system, and in the package, there are Corresponding number of copper rings, which are for pex end on the adpter. You need special tool like pex pipe crimping tool to fasten those ringsNot provided in package. Operating temperatures Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F.. Package Include 3 PCS 34 Inch adpter with 3pcs 1 Copper Ring Crimp..

PIPE COMPATIBILITY This pex washing machine outlet box is ONLY compatible with crimp pex fitting system, NOT compatible with expanding fitting system. Its inlets work well with 12 inch PEX B pipes the outlets fit well with 34 inch FHT washing machine hoses.. PACKAGE INCLUDES Pex Washing Machine Outlet Box1 Pre-installed support bracket2 Clamp4.. PRACTICAL DESIGN This washing machine outlet box features both central and side drains, which is good for washing machine to drain off water. Recessed design saves space. Two support brackets serve to bridge the gap between mounting plates.. VERSATILE APPLICATIONS SUNGATOR 12 pex washing machine outlet box allows for inverted installation and provides solutions for a range of residential washing machine applications. The box and the frame can be detached from each other, enabling a flexible layout.. DURABLE RELIABLE The shut off valves of pex laundry outlet box are forged from solid brass that can withstand long period of wear and tear. Conforms to American standards and meets cUPC and NSF requirements, SUNGATOR pex washing machine outlet box is safe to use..

Supply adapters or cap 3 required which connect the main hot cold pipe lines to the ManaBloc- and port adapters or caps 30 required are not included and must be purchased separately. Accessories supply end caps, port caps, brackets, etc. are sold separately.. Supply adapters are a 1 special Viega thread- only Viega brand supply adapterscaps may be used. The use of any other pipe fitting at these connections will strip the threads .. Available fittings to complete the installation 49224 38 PolyAlloy Press x MANABLOC Port Adapter Lead Free 49234 12 PolyAlloy Press x MANABLOC Port Adapter Lead Free 50023 38 PolyAlloy Crimp x MANABLOC Port Adapter Lead Free 50133 12 PolyAlloy Crimp x MANABLOC Port Adapter Lead Free 50141 1manabloc thread x 34 pex crimp supply adapter Lead Free 50063 1 manibloc thread end cap..

24 Port PEX-B Manifold. Allows individual hot and cold lines to be connected directly to each fixture. Creates a single point shutoff for all home fixtures. Each manifold has an equal number of hot and cold outlets - Outlets are 12 PEX barb shut-off valves. Inlet sizes are 1 MPT - Each manifold comes with a reducing adapter to 34 PEX barb.

Lead Free Non-Pollution PPSU polyphenylsulfone Material Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Pex Manifolds 6 Ports are suitable for domestic water or radiant heating system, also used retrofit construction and for hot or cold water distribution.. Extra Long Service Life Resists corrosion and mineral buildup, rust, and freeze damage.. Applications This Multi-port tee PEX A expansion fittings can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.. Easy Installation Pex A Manifold work with Pro-Pex Ring connection methods with help of Expansion Tool. Compatible with all types and brands of PEX A Tubing. Warning Before Making Purchase Package of 2 includes only 2 pieces of Plastic Pex Manifold 6 Ports. NOTE Expansion Tool PEX RingSleeve Not Included in package. Also, Pex Manifold diameter is 34 inch Trunk Ports - Two Sides Open and diameter 12 inch for rest 6 Service Ports must be considered..

SHARKBITE MULTI-PORT TEE Multi-port tee with outlets is designed to supply multiple water lines. COMPATIBILITY SharkBite straight coupling plumbing fittings work well with PEX, copper, and CPVC pipes in any combination. EASY TO INSTALL This 4-port closed multi-port tee allows for quick and easy installation, with no tools, crimping, glue, or soldering required. GAUGES This multi-port tee features temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold. VALVES These stainless steel port tees feature flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.

12 PEX Manifold wvalves, 34 PEX in, clsd. Model Number Sioux Chief - 672XV0490. Item Package Dimension 5.0 L x 5.0 W x 5.0 H. Item Package Weight 1.0 lb.

Proven quality and non-corroding. Reduced flow noise. Excellent chlorine resistance. PolyAlloy port adapters. Homerun distribution manifold.