Purpose-built for canopy use, ideal for high-performance tree climbing setups where strength, efficiency and compact design are critical. The micro pulley with massive strength of MBS 7,418 lbs. 33kN Weight .20 lb. 91g. Height 3 7.7cm Width 1.7 4.2cm. Mid-line attachable with swinging aluminum side plates for fast, easy setup and repositioning. Can accommodate ropes up to 12.9mm 12 diameter. Sheave Diameter 32mm. Sheave Width 17mm. Scannable data matrix for easy equipment tracking, inspection logging and compliance management.

ULTRA-LIGHTWEIGHT Weighing just 35 g, the TIBLOC is an exceptionally compact emergency ascender that can be easily carried on a harness or in a pack as a backup.. IMMEDIATE GRIP The automatic system presses the carabiner against the rope to ensure the teeth engage instantly, eliminating the slippage often found in older passive designs.. ALL-CONDITIONS PERFORMANCE Features a stainless steel cam with angled teeth and a self-cleaning slot to provide reliable grip on muddy, frozen, or icy ropes.. VERSATILE UTILITY Can be used as a rope ascender for emergency climbing, to build hauling systems for rescue, or to replace friction knots in self-rescue situations.. ROPE COMPATIBILITY Designed for use with single ropes ranging from 8 to 11 mm in diameter. Markings on the device indicate the correct installation direction..

DESIGNED BY PROFESSIONALS, FOR PROFESSIONALS Easily install low-voltage network cables over long distances 90-degree corners without kinks snags with our Professional Cable Pulley, made with tough ABS plastic, smooth roller bearings easy-remove, Extruded 6063-T3 Anodized Aluminum brackets. GUIDES UP TO 20 CAT6 CABLES IN ONE Made with tough, impact-resistant ABS plastic rollers with extra-deep cable-grooves, our Wire Cable Pulley Wheel easily holds up to 20 CAT6 network cables per pull, with smooth, reliable, anti-friction bearings for easy, friction-free cable pulling. EXTRA-TOUGH, EXTRUDED ALUMINUM BRACKETS Weve designed our Network Cable Pulley with extra-tough Extruded 6063-T3 Anodized Aluminum Brackets a gap of only 0.015 between the bracket shoulder and the outer edge of the roller. This tight tolerance helps prevent the cables from snagging or trying to jump over the edge of the pulley in certain situations for safer long distance Pulls. 360-DEGREE SWIVEL FIXING CLIP Designed with rotating, strong swivel-clips, our Cable Pulling Wheel can be easily attached to fixing points while freely rotating to keep cables fully aligned with the direction of pull, eliminating snags kinks around 90 degree turns. WORK SAFER SMARTER, NOT HARDER Unlike some other cable pulleys, our Data Cable Pulley features a split-style bracket for easy removal after installation, without threading or unthreading at either end. By keeping you off ladders to untangle cables, our pulley helps you work smart and safe. Don't risk falls - Hit 'Add to Cart' Now.

Swivel Pulley Design Combines a swivel and pulley into one tool, offering smooth operation and self orientation in climbing and rigging systems.. Long Lasting Durability Designed to handle demanding tasks with an 8kN WLL and 36kN MBS, ideal for climbing and rigging systems.. Easy-To-Open Sideplate Features a unique sideplate that opens while the pulley is still attached to the anchor, improving efficiency.. Prusik Minding Pulley Equipped with prusik minding edge allowing for easy use with a prusik for progress capture.. Compatible with 13mm Ropes Supports ropes up to 13mm in diameter, offering flexibility for different rigging and climbing applications..

HAUL SYSTEM ESSENTIAL Designed to act as a tractor or progress capture device in mechanical advantage systems Z-rigs the openable cam allows for easy installation at any point on the rope.. DOUBLE SAFETY CATCHES Features independent safety catches on both sides to prevent accidental opening includes red visual indicators to warn you if the device is unlocked.. ROPE COMPATIBILITY Compatible with a wide range of ropes from 9 to 13 mm diameter the ribbed cam is designed to grip effectively without damaging the rope sheath.. ERGONOMIC HANDLING The cam is integrated into the frame to facilitate handling a large attachment hole allows the carabiner to rotate freely, preventing cross-loading.. PROFESSIONAL CERTIFIED Certified for Technical Use NFPA 25001983 and European standards CE EN 567, EN 12841 Type B..

BETTER GRIP EASIER ASCENTS An ergonomic-molded handle allows a comfortable yet powerful grip. Wide opening allows the handle to be easily grasped, even with thick gloves. Easy-to-grip upper section maximizes power when pulling with two hands.. INTUITIVE DESIGN Wide lower hole allows the carabiners of the CONNECT ADJUST lanyard and FOOTAPE or FOOTCORD footloop to be easily attached Upper hole for clipping a carabiner around the rope.. DEPENDABLE PERFORMANCE Great for ascending AND hauling. Ascender shape designed to help prevent accidental snagging. Toothed cam with self-cleaning slot optimizes performance under any conditions frozen or dirty ropes.. RIGHT-HANDED Pair left- and right- handed ASCENSION ascenders for a seamless rope climbing experience..

Pulley carabiner, the Screwlock version is designed for use as a directional point on the ASCENSION handled rope clamp during short rope ascents.. H profile of carabiner - ensures an improved strength-to-weight ratio - protects markings from abrasion. Facilitates manipulations - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency. Specifications Materials aluminum Min. rope diameter 7 mm Max. rope diameter 13 mm Sheave diameter 18 mm Maximum working load 2 x 2 4 kN Efficiency 85 Major axis strength 20 kN Minor axis strength 8 kN Open gate strength 7 kN.

COMPACT LIGHTWEIGHT The Small D Sm'D design offers the functionality of a D-shape carabiner in a significantly lighter and more compact package 41-55g.. TIBLOC KEEPER HOLE Features a small, dedicated hole in the spine that allows you to tether a TIBLOC or MICRO TRAXION to the carabiner with a cord, making the system loss-proof.. D-SHAPE EFFICIENCY The asymmetrical D-shape guides the load to the major axis 23 kN, making it perfect for belay devices, pulleys, and lanyard ends.. NON-LOCKING OPTION The WALL version M39A SSN features a non-locking straight gate, specifically designed for aid climbing and easy clipping during progression.. SNAG-FREE KEYLOCK All versions feature a Keylock nose no hook and a fluid interior design to prevent snagging on webbing, ropes, or bolt hangers..

Harness tool holder. Design allows one-handed selection and return of tools. Slips in through the harness straps and stays in place, thanks to its stabilizing clip. Hole on top for attaching a tether to tools. Upper part designed for grouping and organizing equipment.

Extremely light and ultra-compact pulley. Easy and quick installation thanks to movable side plates. Sealed ball bearings mounted pulley for excellent efficiency.

ROLLCLIP A ANCHOR Gate opens on the pulley side to facilitate rope installation when the pulley is fixed to an anchor.. TRIACT-LOCK Automatic 3-stage locking system lift, twist, open for maximum security in critical applications.. INTEGRATED SHEAVE Mounted on sealed ball bearings for excellent efficiency minimizes system height..

Key lock system prevents any accidental snagging of the carabiner when putting the pulley in place. Gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor. May be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping. Sheave mounted on sealed ball bearings for excellent efficiency. FULLY EQUIPPED The H profile of carabiner ensures an improved strength-to-weight ratio and protects markings from abrasion..

Bushings have been replaced with sealed bearings, offering improved efficiency. Updated straight sides tend the hitch better. Extra volume in U shape rather than V shape above sheave means rope feeds in more easily when used in hitch climber system. Rigging plate helps organise single or multiple attachments. Fairlead flares help maintain high working efficiency. Compatible with most carabiner shapes and many textile connecting elements including rope and webbing. Size of attachment holes reduce probability of unwanted rotation of locking carabiners. Direct connection to textile components at the round edged attachment holes, helping to reduce system costs, increase lift height, minimise space required and enhance tolerance to torsion. Side plate shape allows an autoblock knot to function when the rope approaches the sides as well as at the bottom of the pulley. Tamperproof construction.

The eashook open carabiner is designed to be used at the ends of a double lanyard or placement at work. The open eashook carabiner is designed to be used at the ends of a double lanyard or placement at work. Connector with gated connection point for double lanyard and work positioning lanyard. H-shaped cross-section ensures an improved strength-to-weight ratio and protects markings from abrasion.

Very high efficiency double pulley with swivel. Designed for maximum simplicity when setting up haul systems or tyroleans for work at height or rescue. Optimal efficiency large diameter sheaves mounted on sealed ball bearings for excellent efficiency. Easy handling swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers.. Type of pulley sealed ball bearings Sheave diameter 40 mm maximum usage load 3 x 2 6 kN Breaking load 36 kN Yield 93.

Lightweight oval aluminium safety carabiner. unisex. One Size. Mountaineering and Hiking Climbing. Aluminium.

OVAL SHAPE Symmetrical oval shape allows for optimal positioning of equipment pulleys, rope clamps, mobile fall arresters by keeping them centered.. KEYLOCK SYSTEM Snag-free body and gate interface prevents the carabiner from hooking onto loops, hangers, or ropes during use.. H-PROFILE The H-shaped cross-section ensures an optimal strength-to-weight ratio and protects markings from abrasion.. FLUID DESIGN Fluid interior design limits the risk of having a catch point and facilitates the rotation of the carabiner.. LOCKING OPTIONS Available in Screw-Lock Manual, Triact-Lock Auto, and Ball-Lock Auto systems to suit different professional and sport needs..

Rope compatibility 7 to 13 mm. Sheave diameter 51 mm. Ball bearings yes. Efficiency 97 . Maximum working load 4 kN x 2 8 kN.

Versatile ultra-compact pulley. Ultra compact, lightweight pulley. Designed for hauling systems and deviations. Sheave mounted on self-lubricating bushings for good efficiency. Maximum working load 2,5 kN x 2 5 kN.

Ultra-strong pulley with swinging side plates. Designed to maneuver heavy loads or for intensive use.. Large diameter sheave mounted on sealed ball bearings for excellent efficiency. Accepts up to three carabiners to facilitate rope maneuvers. CEUIAA certified. Efficiency 95 . Breaking strength 36 kN. Working load 8 kN. Sheave 38mm. For use with 7-13mm ropes. Weight 185g.

1.Made of 7075 aviation aluminum material, light weight, high toughness and high strength.. 2.Small size and light weight, only 3.7 x 2.6 inches in size, suitable for 13mm rope.. 3.Static tension approx 30kn, rolling tension approx 15kn.. 4.This type of pulley is usually used for zipline sports, and the hanging point adopts three-hole round design, which is more uniform in force.. 5.Our pulleys are suitable for rock climbing, rappelling, mountaineering, exploration, aerial work, hauling, transport or other machinery work etc..

High Efficiency Stainless steel ball bearing, with self-lubricating bushing, no friction stuck, more stable and convenient to use. The 360 rotating side panels allow for quick rope installation and removal, improving efficiency.. Excellent Performance Made of Aluminum-magnesium alloy material forging process. Oxidation resistance Durable. Breaking strength 30kN 6750lbs, Size 4.88 in x 3.26 in, Weight 0.55lb. Lightweight and easy to carry.. Rope-Friendly Rope MAX 16 mmMax. High strength torsion resistance, prolong the life of the rope. Large load, large traction, can meet your more needs.. Wide Application Suitable for mountaineering, rock climbing, ice climbing, expansion, cave, rescue, aerial work, training etc. SEPEAK pulley can also be used for backyard zipline swing seats. Multiple uses make your life more convenient and safe. What You Get 1pc SEPEAK Blue Pulley. If you have any question, please contact us..

Major axis strength 23 kN. Minor axis strength 23 kN. Opening 11 mm. Weight 70 g. Certifications CE EN 362.

High Efficiency Stainless steel ball bearing, with self-lubricating bushing, no friction stuck, more stable and convenient to use. The 360 rotating side panels allow for quick rope installation and removal, improving efficiency. The isolation plate design can make the two ropes do not entangle with each other, to ensure the safety of users. And the upper and lower holes can be connected to the hook or rope.. Excellent Performance Made of Aluminum-magnesium alloy material forging process. Oxidation resistance Durable. Breaking strength 30kN 6750lbs. Rope-Friendly Rope MAX 16 mmMax. High strength torsion resistance, prolong the life of the rope. Large load, large traction, can meet your more needs.. Wide Application Suitable for mountaineering, rock climbing, ice climbing, expansion, cave, rescue, aerial work, training etc. SEPEAK pulley can also be used for backyard zipline swing seats. Multiple uses make your life more convenient and safe. Size 5.94 in x 3.26 in, Weight 0.95lb. Lightweight and easy to carry..

LARGE CAPACITY HMS The pear shape HMS offers a large internal capacity, making it perfect for organizing belay stations or connecting multiple ropes and slings.. MUNTER HITCH READY The wide, flat top bar is specifically designed to facilitate the use of a Munter hitch Italian hitch for belaying or lowering.. ERGONOMIC DESIGN The large size makes it easy to manipulate even with thick gloves, and the Keylock nose prevents snagging on webbing or anchors.. WIDE GATE OPENING Features a 28 mm gate opening, significantly larger than standard D-shapes, allowing for easy clipping of large diameter ropes or multiple items.. HIGH STRENGTH Rated to 27 kN on the major axis despite its lightweight aluminum construction 85g..

Weight 265 g. Certifications CE EN 567. Materials aluminium, stainless steel, nylon. Min. rope diameter 8 mm. Max. rope diameter 13 mm.

Weight 425 g. along the rope glides up and down, without manual interventions. Install and remove it anywhere on the rope. the connecting lever makes the system a must have to overcome splitting. Asap'Sorber or Asap'Sorber Axess It is used with an energy absorber to work away from the rope.

Special side plates designed for use with a Prusik friction hitch in lightweight progress capture systems. Sheave mounted on sealed ball bearings for excellent efficiency. Flat, compact and lightweight. CEUIAA certified. Efficiency 91 . Breaking strength 23 kN. Working load 5 kN. Sheave 25mm. For use with 7-11mm ropes. Weight 80g.

SINGLE ROPE COMPATIBILITY Converts the ZIGZAG and ZIGZAG PLUS mechanical Prusiks into an ANSI Z133 compliant system for use on single ropes SRSSRT.. ADDED FRICTION Provides continuous additional braking action via two friction pins, ensuring controlled and smooth descents on a single line.. SMOOTH ASCENT When used with an Am'D or OK carabiner, the H-shaped cross-section creates a unified system that glides smoothly up the rope during ascents.. ERGONOMIC HANDLE Features a large handle that offers excellent grip, making it easier to manage the rope and facilitating movement while limb walking.. EASY INSTALLATION The openable side plate with triple-action unlocking allows for quick and easy installation on the rope at any point..

PROFESSIONAL QUALITY The Petzl PROGRESS ADJUST-I Progression Lanyard - single adjustable progression lanyard - engineered for professional lanyards applications.. CERTIFIED SAFETY Meets international standards with certifications CE EN 358, EAC, ANSI Z359.3, CSA Z259.11, GB 24453 WQX. PROFESSIONAL GRADE Designed for work-at-height professionals requiring reliable, high-performance equipment.. LIGHTWEIGHT Weighing only 0.48 lb, balancing durability with ease of use.. WORK POSITIONING Single adjustable progression lanyard - designed for secure, reliable positioning during professional work-at-height operations..

Extremely lightweight and ultra-compact pulley. Quick and easy installation due to the swinging side plates. Sheave mounted on sealed ball bearings for excellent efficiency. Materials aluminium side plates, aluminium sheave. Certifications CE EN 12278, UIAA.

EFFORTLESS GLIDE Easy to install and easy to use. The FIXE pulley has a sheave mounted on self-lubricating bushings for easy rope glide during hauling or ascending.. SIMPLE INSTALLATION Fixed side plates prevent fumbling, allowing quick installation and coupling with a rope clamp.. LIGHTWEIGHT Weighing just 3.2 oz, this pulley is easy to throw onto your harness and forget about until you need it.. COMPATIBILITY Works with ropes 7-13 mm in diameter.. Lightweight This compact, aluminum pulley weighs only 90 grams..

LIGHTWEIGHT DESIGN Weighs only 240g thanks to aluminum pulleys, making it ideal for narrow passages and explorers who prioritize minimal gear weight.. EASY TO USE A traditional bobbin descender where speed is controlled by varying your grip on the rope compatible with 8.5 to 11 mm low stretch kernmantle ropes.. SAFETY GATE The safety gate on the openable side plate allows the rope to be installed easily without disconnecting the device from the harness.. PRACTICAL INSTALLATION The elongated connection hole allows the FREINO Z carabiner to rotate, making the descender loss-proof when transferring from gear loops.. MAINTENANCE FRIENDLY The aluminum pulleys can be rotated or replaced Part D004CA00 to extend the lifespan of the device..

Very high efficiency single pulley with gated swivel. Compact pulley designed for maximum simplicity in setting up haul or load deviation systems and tensioned highlines for work at height and technical rescue, when weight and size are important factors. Mid-size diameter sheave mounted on sealed ball bearings for great efficiency. Facilitates operations, thanks to the gated swivel. Sheave type Sealed Ball Bearings Sheave diameter 25mm Maximum working load 2 x 2,5 5kN Breaking strength 23kN Efficiency 91.

EFFICIENT ASCENTS The benchmark chest ascender designed for rope ascents keeps the body upright and allows for a smooth glide up the rope.. WIDE CHANNEL Large Version The CROLL L B016AA00 features a wider rope groove that limits friction, making it ideal for use with wide-diameter 8-13 mm, swollen, or stiff ropes.. DURABLE DESIGN Both versions feature a stainless steel wear plate or reinforced channel to improve durability against rope friction.. RELIABLE GRIP The toothed cam with a self-cleaning slot optimizes performance under difficult conditions, such as frozen or muddy ropes.. EASY OPERATION The ergonomic safety catch is integrated into the body of the ascender to prevent snagging and allows for simple, one-handed opening..

Model Number P54. Package weight 0.45 pounds. item package dimensions 13.462L x7.62Wx5.08H centimeters. Item package quantity 1.0.

ELEGANT DESIGN - Aluminum twin sheave with lower becket allows for multiple rigging options. Rope size up to 16 mm 58.. TOUGH AND RELIABLE - Aluminum side plates swing open easily for quick reeving.. INTUITIVE - Mounted with ball bearing for higher efficiency and smoothness. Swing side for easy and rapid rope installation and removal.. MULTIPURPOSE - Perfect for arborists, tree climbing, mountain climbing, rock climbing, ice climbing, rescue, rappelling, and many more.. BUILT TO LAST - Brass bushing and solid steel center pin for ultimate durability..

Durable Material The climbing ascender is made of high quality magnesium alloy, durable, high strength, lightweight and easy to carry. Dimensions Approx 7.8 7.5 cm 3.0 2.9 inch. Weight 95g. Max bearing capacity is 220lb. Suitable for 8-13mm diameter rope. Safety Rope Grab The connection hole of the rope grab is bidirectional and connected to the lock to protect the body. The rope grab is easy to slide up and down, easy to stop. Safety Design The barrier sheets can stuck the rope automatically. When your body weightlessness tilt, this climbing self-locking climbing rope grab will play the effect of grasping rope and stop falling, it can alsways protect you. Applications saddle hunting, rock climbing, tree climbing, construction, downhill protection, roofing, caving, climbing expand protection, exploring, engineering protection, aerial work, tree arborists, emergency and rescue services.

INTENDED USE The ULTRALEGERE can be installed on a carabiner for emergency use.. LIGHTWEIGHT The size and weight of this pulley are reduced to an absolute minimum, making the ULTRALEGERE the lightest pulley available at only 10 grams.. COMPATIBILITY The ULTRALEGERE pulley is designed for use with a symmetrically shaped carabiner.. DESIGN The ULTRALEGERE is a simple nylon sheave that accepts ropes 7 to 13 mm in diameter.. DETAILS This pulley has a working load of 1 kN..

COMPACT LIGHTWEIGHT Weighing only 85g, the BASIC offers a secure grip for rope ascents while taking up minimal space on a harness or in a pack.. VERSATILE USE Ideal for hauling systems, self-belay on fixed lines, or as a secondary ascender the wide lower hole easily accepts carabiners for lanyards and foot loops.. RELIABLE GRIP Features the standard Petzl toothed cam with a self-cleaning slot, ensuring optimal performance on frozen, muddy, or dirty ropes.. UPPER GUIDE HOLE The upper hole allows a carabiner to be clipped around the rope to guide it and keep the device properly aligned during use.. DURABLE Reinforced with a stainless steel wear plate to protect the aluminum frame from rope friction and extend the lifespan of the device..

Weight 9.2 oz 260 gm. Breaking Strength 2 x 18 kN36 kN. Working Load 2 x 4kN8 kN. Max Rope Diameter 13 mm. Sheave Diameter 1.5 38 mm.

Triple Attachment Climbing Pulley Designed for use in climbing and rigging systems , providing multiple attachment options for various setups.. Swivel-Top for Smooth Movement The swivel-top connection facilitates self orientation of climbing or riggins systems.. High Efficiency Pulley Pulley sheave uses high-efficiency bearing for smooth operation.. Secure Carabiner Connections Rubber O-rings on the connection points help prevent cross-loading, improving performance in rope pulley systems.. Lightweight and Rope Compatible Weighs just 20 oz and accommodates ropes up to 13mm, making it a great addition to any rope pulley system..

ULTRA-COMPACT LIGHTWEIGHT Weighing only 68 g, this updated pulley is designed for maximum portability and ease of handling in technical systems.. SWINGING SIDE PLATES Features moving side plates that allow for quick and easy installation on the rope large attachment hole accommodates most carabiners.. EXPANDED ROPE COMPATIBILITY Now compatible with a wider range of textile ropes, from 6 mm up to 13 mm in diameter.. RELIABLE EFFICIENCY Sheave mounted on self-lubricating bushings delivers good efficiency 71 for hauling loads and setting up deviations.. PROFESSIONAL CERTIFICATION Certified to CE EN 12278 and UIAA standards meets NFPA 2500 Technical Use and XF 494 Light requirements..

High Quality Material- Lixada Zipline Pulley is made of aluminum and magnesium alloy shell and stainless steel pulley. The double sheaves of pulley provide great smooth rotation and efficient performance.. Efficient Working-Two stainless steel discs with sealed stainless steel ball bearings prevent twisting for increased speed, efficiency and safety. Feature efficient bearings for high-speed adventure.This tandem pulley works better than a single pulley.. Strong Breaking Strength- This rescue pulley has a maximum breaking strength of 30KN 6700LBS, so it can keep you safe in most outdoor applications, such as rescues, swing seats or backyard zipline settings, etc.. Cable DiameterThis tandem pulley is specially designed for ropes and cables Maximum rope diameter 13mm0.5in Maximum cable diameter 12mm0.36in. This twin cart is extremely lightweight and durable enough for your outdoor adventures.. Multiple Use-The holes for easily clipping carabiners, double steel sheaves could compatible with both textile rope and cable.This stainless steel zipline pulley can be used for backyard ziplineswing seatbaby trampolinesetup, dog run leash, lift, rescue, bungee jumping, downhill, aerial work or other outdoor adventure activities..

Ultra-light and ultra-compact progress capture pulley volume and weight 50 smaller than the MINI TRAXION. Excellent efficiency, thanks to sealed ball bearings 91 . Cam can be locked in open position so device can be used as a simple pulley. Works even on frozen or muddy ropes. For use on ropes between 8 and 11 mm in diameter. Weight 85 g. Working load 2,5 kN x 2 5 kN . Breaking strength 7.5 kN x 2 15 kN . Working load as progress capture pulley 2.5 kN . Breaking strength as progress capture pulley 4 kN . Certifications CE EN 567, UIAA..

Rope installation is quick and easy, thanks to the markings on the device.. The ergonomic handle and integrated braking allow for comfortably controlled descent.. The integrated progress-capture pulley with very large diameter sheave mounted on sealed ball bearings rotates in only one direction for excellent hauling efficiency.. The AUTO-LOCK system automatically locks the rope when the handle is not in use.. Available in two sizes Small and Large.

Rope installation is quick and easy, thanks to the markings on the device.. The ergonomic handle and integrated braking allow for comfortably controlled descent.. The ergonomic handle and integrated braking allow for comfortably controlled descent.. The AUTO-LOCK system automatically locks the rope when the handle is not in use.. CE, EN 341 type 2 class A, NFPA 1983 General Use, EAC.

Material This Fusion Climb Strux Pulley FP-8152-BLU is made from a lightweight and durable Aero Space Aluminum Alloy. This pulley is perfect for various activities due to its high strength and lightweight.. Feature The Strux Pulley featured side swing cheeks, which allow for the dual pressed aluminum frames. Giving a more secure use and easier rope installation and removal.. Feature Efficient and smooth rotating sheaves held together by two aluminum rivet pins which provides the best user experience, reducing wear and tear on your rope to ensure the best product lifetime.. Feature The Strux provides smooth rounded edges along the frame and bushing for reduced wear and longer usage life of rope.. Feature The large eyelet opening allows for multiple anchors to be used making this pulley the right choice for almost every application.. Intended Use This pulley is intended to be used with 14mm Rope or smaller. TO NOT BE USED WITH WIRE ROPE.. SPECS Weight 0.57 lbs., Dimensions 1.42 x 3.5 x 5.04 inches, MBS 34 kN. TAA Approved..

17075 Aviation aluminum, built -in double -rolled bead bearings,high toughness and strength.. 2Static tension 30KN about 3000kgs6613lbs, rolling tension 15KN about 1500kgs3306lbs.. 3Small and compact size. Lightweight, portable, strong and durable.. 4This lightweight and durable pulley is an ideal choice for various applications.. 5Application Rock climbing, mountaineering, exploring, rappelling, rescue, aerial work, hauling, transporting or other mechanical advantages.

Special side plates designed for use with a Prusik friction hitch in lightweight progress capture systems. Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems, including the most complex. Sheave mounted on sealed ball bearings for excellent efficiency. Lightweight aluminum side plates and sheaves. Certifications CE EN 12278, UIAA.

Very high efficiency single pulley with swivel. Designed for maximum simplicity in setting up hauling or load deviation systems and tyroleans for work at height, rescue and tree care. Optimal efficiency and easy handling large diameter sheave mounted on sealed ball bearings for excellent efficiency. Easy handling swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers.. Type of pulley sealed ball bearings Sheave diameter 38 mm maximum usage load 4 x 2 8 kN Breaking load 36 kN Yield 95.

Weight 290 g Materials aluminum, stainless steel, polyamide. Certification s CE EN 12278, NFPA 1983 General Use Pulley, UIAA. Rope diameter min . 7 mm Rope diameter max . 13 mm. Type of pulley sealed ball bearings Sheave diameter 38 mm. maximum usage load 4 x 2 8 kN Breaking load 36 kN Yield 95.

CNC-Milled for Maximum Strength Each pulley is machined from solid T6 aluminum, retaining material exactly where it counts, and achieving an excellent strength-to-weight ratio.. Built-In Axle Design The axle is machined directly into the sideplate, resulting in enhanced strength, increased stability, and fewer parts for greater long-term reliability.. Slim, Snag-Free Profile A recessed axle screw ensures a low-profile body thats less likely to catch on gear, ropes, or harnesses during use.. Smooth, High-Efficiency Operation Equipped with sealed ball bearings, this pulley delivers consistent, high efficiency..

Load Capacity Certified to CE EN12278 standards with a rated breaking strength of 5845 lbs 26 kN 2600 kg, ensuring safety and reliability for professional use. High-quality Materials Made from durable 7075 aluminum alloy with a stainless-steel sheave and bearings, measuring 1.8 x 3.2 x 1.1 inches 4.4 x 8.1 x 2.8 cm and weighing only 3.2 oz 90 g for easy portability. Smooth Bearing Design Features a 12 mm sheave diameter with sealed bearings to reduce friction, prevent rope twisting, and provide quiet, smooth operation. Mounting Compatibility Accepts ropes up to 12 mm in diameter and works with both static and dynamic lines, equipped with side attachment holes for instant carabiner, sling, or mechanical advantage system connection. Wide Application Suitable for climbing, tree work, rescue operations, hauling, mechanical advantage setups, high-angle work, cargo lifting, aerial yoga, and home fitness pulley applications.

The Nano Traxion from Petzl is an ultra-light and compact pulley with backstop, whose encapsulated ball bearings assured Ideal efficiency. The pulley has a wide range of uses, the serrated clamping cam with cleaning slot offers optimal function in all conditions. The aluminium roller with encapsulated ball bearings offers Ideal efficiency. The pulley has the following features cable compatibility 7 to 11 mm, diameter of the cable disc 18 mm, efficiency 91 , breaking load 2 x 75 15 kN.

Durable Built to Last Made from aerospace-grade 7075 aluminum alloy with an anodized finish, offering superior strength, corrosion resistance, and lightweight performance. The 0.8 21mm sheave ensures smooth, efficient rope travel. Compact Yet Powerful Measuring just 1.73 x 3.2 and weighing only 3.17 oz, this pulley offers impressive strength without the bulk easy to carry and quick to deploy in the field. Smooth Rope Compatibility Compatible with ropes up to 12mm 0.47 in diameter. Perfect for hauling systems, rappelling setups, or mechanical advantage configurations. Heavy-Duty Strength You Can Trust CE Certified with a 26kN 5,845 lbf max load rating, this compact micro pulley delivers high-strength performance for climbing, rigging, and rescue applications. Versatile Use Ideal for more than just climbing use it for rescue missions, tree work, hauling gear, lifting cargo, aerial yoga setups, and more.

For Use With Ropes End 892 End 1891 8 13 Mm. Spring Operated Cam For Use As A Rope Ascender. Sliding Lock For Use As A Pulley. It Allows The Hauling Of Light Loads. Exceptional Use With Webbing 1016 Mm, For Positioning Adjustment.

AVIATION ALUMINIUM PULLEYThis rock climbing pulley is made of 7075 aviation aluminium, which is anti high strengt.. RELIABLEPulleys, heavy duty, can withstand a pulling force of about 4KN, static tension of the pulley 25KN, the side panels can prevent the rope from slipping, super reliable, and ensure your climbing safety.. FINE POLISHINGpulleys for rope fine polishing ensures a smooth surface, which can provide smooth and fast rotation, greatly reduce friction.. INSIDE SPRINGThe rope pulley inside is provided with a spring for easy one hand .Single swivel pulley is suitable for 8 12mm rope.. WIDELY USEDThis pulleys premium aluminium pulley is widely used in mountaineering, hoisting, caving, , aerial work, heavy objects, etc..

RELEASABLE HAUL SYSTEM Designed specifically for 41 mechanical advantage systems features an ergonomic handle that allows you to release the cam and lower heavy loads up to 280 kg without changing the rigging.. CONTROLLED DESCENT Equipped with a faceted main sheave single-direction rotation and an integrated brake on the side plate, providing added friction and precise control when lowering a victim or load.. EXCEPTIONAL EFFICIENCY Large diameter sheaves 38mm mounted on sealed ball bearings deliver 95 efficiency, significantly reducing user effort during heavy hauls.. VERSATILE RIGGING Features a large swivel that allows the pulley to orient under load and accepts up to three carabiners auxiliary attachment point allows for complex system configurations.. PROFESSIONAL SPECS NFPA 2500 General Use G Pulley Technical Use T Rope Grab ANSI Z359.4 Synthetic Rope Tackle Block Breaking Strength 36 kN Max Working Load 280 kg Rope Compatibility 8-13 mm..

PULLEY LOCK. MICRO TRAXION. Jamming pulley ultra-light and ultra-compact.. Excellent performance thanks to sealed ball bearings. Floor Plans of engraved rope inside the pulley.. Designed for crevasse rescue, recovery, self-rescue and as an emergency blocker..

ROPE CABLE COMPATIBLE Highly versatile design can be used on textile ropes up to 13 mm as well as steel cables up to 12 mm.. MAXIMUM EFFICIENCY Stainless steel sheaves are mounted on sealed ball bearings to deliver top-tier performance and 95 efficiency.. HIGH SPEED Engineered to smoothly and safely handle high-velocity traverses up to 20 meters per second 20 ms.. EASY RIGGING The large attachment point accepts up to three carabiners, simplifying the setup of complex mechanical advantage or redundant safety systems.. HEAVY-DUTY DURABILITY Wear-resistant stainless steel sheaves ensure a long lifespan even with frequent use on steel cables weighs 270 g..

Diameter min. 7 mm. Diameter max. 13 mm. Diameter of the rope disc 18 mm. Maximum load capacity 2 x 2.4 kN. Material Aluminum.

and Lightweight Anodized coloring enhances oxidation resistance, making it , lightweight, and. Smooth Sliding Action Double bearing design ensures steady and smooth sliding for optimal performance.. High-speed Rotation Support Effectively supports high-speed rotation, reducing friction coefficient during movement.. Uniform Force Distribution The 3 round holes hanging design ensures smooth and uniform force distribution.. Versatile Rope Compatibility Compatible with ropes up to 14mm, ideal for complex saving and hauling setups..

Extreme Snatch BlockProudly Introducing our Extreme Series Snatch Block which is made of Ultra-Strong Fully Forged Steel to provide 79,300 LBS Break Strength to work with most Winch Ropes with diameter under 58in. With ALL-TOP's exclusive 12-Stage Coating process including E-coating and Powdered Coats, these Extreme-Series products are extremely Impact-Resistant and have a much longer Wear Cycle against Wear Abrasion.. 12-Stage CoatingALL-TOP's exclusive standard finishing makes our Extreme-Series products have doubled and even tripled durability compared to other similar-looking products. Besides Forging, Heat harden, Galvanization, and E-coating, ALL-TOP Extreme Series products are finish Coated with Ultra-High-Wearing-Resistant Powder to increase their long-term durability, impact resistance and chemical resistance under extreme weather conditions.. 4X4 Must-HaveNo matter you are an off-road beginner or a professional badland explorer a weekend family camper or a challenge rock crawler you need this tactical snatch block for your Winch Pulley System. You would be able to enhance your winch performance by setting up a movable pulley system, and be able to change recovery direction in complicated situation where has no straight fixing point for your recovery.. Applicable OccasionFOR ATV, UTV, SUV, Pickup Trucks and 4X4 vehicles in desert, snow, rain forest and off-road trails, sometimes there is no straight forward recovery point in front of stuck vehicles due to trails' narrow, cliff's dangerous, riversides' slippery. Changing recovery direction by using snatch blocks is necessary. You could also increase your winching force by setting up a pulley system as your stucking friction might exceed your winch pull rating.. Exclusive WarrantyTo Join ALL-TOP's 200,000 Community Today, our Reliable Overland Products support all Pro Players over the world. We persistently improve our Overland Products After-Sale Services to ensure your 100 Satisfaction Experience. ALL-TOP Snatch Blocks are provided with 99-Year 999-Month Hassle-Free Warranty and Lifetime Customer Support..

High-Quality Material Crafted from lightweight and durable Aero Space Aluminum Alloy, this Fusion Climb Secura Pulley is built to withstand rigorous activities with its high strength and lightweight design.. Secure and Easy to Use Featuring three pressed aluminum plates and side swing cheeks, this pulley ensures a more secure use and allows for easier rope installation and removal, making it ideal for various activities.. Efficient and Smooth Enjoy a smooth experience with efficient rotating sheaves held together by two aluminum rivet pins, reducing wear and tear on your rope, ensuring a longer product lifetime.. Versatile Application The Secura Pulley offers smooth rounded edges and a bushing that reduces rope wear, allowing you to use it for multiple anchors and almost every application you need.. Intended Use and Specs This pulley is intended for use with 15mm Rope or smaller. Remember not to use it with wire rope. The pulley's dimensions are 6.0 x 3.2 x 2.2 inches, with a Maximum Breaking Strength MBS of 32 kN and TAA Approved certification..

Ekat Micro Pulley with Side Swing Cheeks Crafted from high strength and lightweight Aero Space Aluminum Alloy, this pulley is perfect for various activities with its compact and durable design.. Secure and Easy Installation The Ekat features side swing cheeks, providing dual pressed-aluminum frames for a more secure and hassle-free rope installation and removal.. Wide Application and High Breaking Strength This quality-made climbing pulley boasts a 25kN breaking strength, 10kN higher than required by CE and UIAA standards, making it suitable for various applications, from personal rescue to rigging and tree climbing systems.. Lightweight and Versatile Weighing just under 5 ounces 4.2 ounces, this Micro Pulley is ideal for first responders traveling on foot for long and steep distances. Suitable for ropes up to 12mm 0.5 inch in diameter, it's perfect for emergency rescue, hauling, downhilling, and more.. Technical Specifications Suitable for ropes with a maximum diameter of 12mm 0.5 inch. The pulley's dimensions are 3.1 x 2.2 x 1.0, and it's TAA Approved for superior quality and performance..

Quality-manufactured Single Rescue Pulleys for mountain rescue, tower work, ski patrol, or whatever requires a block-and-tackle system.. Sheave of 2.28 inches Dia, pulley with large sheave is much better and easier for hauling a big load.. Mounted with ball bearing for higher efficiency and smoothness Swing side for easy and rapid rope installation and removal. CE UIAA Certification Rating to 32kN 7100lbs for high durability to satisfy all your requirements, like pulling a stranded boat, hauling some out of a crevasse, etc.. Compatible with a wide range of ropes, up to 16mm 58 Multiple anchors for complex rescuehauling system setup.

Ultra-Lightweight Design Weighing just 1.8oz, this pulley is designed for those who need lightweight gear without compromising on performance.. Aircraft-Grade Aluminum Constructed from high-strength aluminum and stainless steel for durability in challenging conditions.. Prusik Minding Design Specifically engineered to handle Prusik knots, ensuring smooth operation in rescue and load-hauling applications.. Crevasse Rescue Ready Ideal for glacier travel, mountaineering, and crevasse rescues, offering reliable load management when it counts.. Compact Portable Its compact size and lightweight nature make it an easy addition to any climbing or rescue kit..

EFFORTLESS GLIDE Easy to install and easy to use. The FIXE pulley has a sheave mounted on self-lubricating bushings for easy rope glide during hauling or ascending.. SIMPLE INSTALLATION Fixed side plates prevent fumbling, allowing quick installation and coupling with a rope clamp.. LIGHTWEIGHT Weighing just 3.2 oz, this pulley is easy to throw onto your harness and forget about until you need it.. COMPATIBILITY Works with ropes 7-13 mm in diameter..

AUTO-LOCK SYSTEM Allows users to easily position themselves at a workstation without having to manipulate the handle or tie off the device rope locks automatically as soon as the handle is released.. ANTI-PANIC FUNCTION Automatically stops the descent if the user pulls too hard on the handle, limiting the risk of accidental uncontrolled descent.. ROPE COMPATIBILITY Designed for use with single ropes from 10 to 11.5 mm in diameter ideal for rope access and work at height.. ANTI-ERROR CATCH Safety cam reduces the risk of an accident due to incorrect installation of the device on the rope.. HEAVY LOADS Capable of handling loads up to 250 kg experienced users only certified to EN 341 Type 2 Class A, CE EN 12841 Type C, ANSI Z359.4, and NFPA 1983 Technical Use..

Can be attached to a wide range of products pulleys, lanyards because of its large opening. Reduces bulk and weight of component systems. Solves the twisting and tangling problems of ropes and lanyards in different situations. Hauling prevents rope twist when the load turns on itself, thus reducing kinking. Hauling avoids the risk of friction between ropes, which improves efficiency. Progression with a lanyard avoids twisting and simplifies manipulations.

Intended use Designed for attachment to a locking carabiner.. Features Attachment point for a locking carabiner. This point has a flexible ring that helps hold the carabiner in the major axis position.. Use with ease Wide opening for easy, semipermanent installation on a lanyard or device.. Hassle free Avoids twisting of lanyards and allows correct positioning of devices.. Perfect addition Compact, gated assembly reduces bulk and weight of component systems..

EXPERT USE Designed for experienced rope access workers allows for smooth descent control and hands-free positioning without tie-offs.. AUTO-LOCK SYSTEM The rope is automatically locked as soon as the handle is released the automatic return system on the handle limits the risk of accidental snagging.. SAFETY GATE Equipped with a safety gate on the moving side plate, allowing the rope to be installed while the device remains connected to the harness preventing drops.. DURABILITY Features a stainless steel wear plate non-replaceable that reinforces the rope friction zone for heavy usage.. SPECIFICATIONS Compatible with 10 to 11.5 mm ropes Working Load Limit up to 200 kg Rescue Weight 400 g..

Intuitive to use - technique identical to classic Prusik pulley system - the device locks automatically on the rope once the friction chain extends. For efficient movement within the tree - rope feed is smooth and precise thanks to the release lever, allowing the user great control over hisher movements. Adjusting the pressure on this lever controls the speed of movement - easy to take up slack, thanks to the pulley mounted on sealed ball bearings and the separated and curved side plates - lower attachment hole with high-efficiency swivel ensures stable and correct positioning of the mechanical Prusik and optimal rope glide through the dev. Versatile - for use on either doubled ropes or a single rope, thanks to the CHICANE accessory, which offers more friction on the descent, and the KNEE ASCENT assemblies, which facilitate the ascent - upper attachment hole for the rope end when using a doubled rope or for the CHICANE auxiliary braking device when using a single rope. It has a flexible positioning ring that helps keep the connector oriented along its major axis - auxiliary attachment hole for adding a ZILLON lanyard or connecting. Durability - steel construction for improved durability - separated and curved side plates for better wear resistance. Rope compatibility 11.5 to 13 mm diameter ZIGZAG PLUS allows the user to work in compliance with the ANSI Z133 standard.

HAUL SYSTEM READY Specifically designed to be used in conjunction with the JAG TRAXION double progress capture pulley to easily construct a 41 mechanical advantage system.. HIGH EFFICIENCY Both 25 mm sheaves are mounted on sealed ball bearings to provide excellent efficiency 91, maximizing your pulling power.. COMPACT LIGHTWEIGHT Weighs only 120 g, making it easy to carry and deploy in tight spaces or complex rigging setups without adding unnecessary bulk.. VERSATILE COMPATIBILITY Engineered to safely handle standard work and rescue ropes ranging from 8 mm to 11 mm in diameter.. PROFESSIONAL CERTIFICATION Built for demanding environments and certified to CE EN 12278 and NFPA 2500 Technical Use standards..

ProClimb Micro Pulley with Fixed Side 22kN, compact and light, compatible with rope up to 12 13mm, CEUIAA certified.. A perfect quality-manufactured micro pulley which is essential for a double-roped climbing or rescue system setup.. Rated at 22 kN 5,000 lbs for high durability to satisfy all your requirements light, compact and quick to install on the rope.. Frequently used in climbing system to reduce the overall friction in order to improve efficiency of your climbing, like slack-tending in spit tail climbing, reducing wear on the bridge when installed on the harness, etc.. As a general-purpose pulley, this micro pulley excels great as well in many other applications, such as hauling, transporting or other mechanical advantages..

Very high efficiency single pulley with one-way rotation and swivel. Designed to be used in conjunction with a descender for maximum simplicity when setting up a heavy load deviation or haul systems for work at height or rescue. Optimal hauling efficiency and lowering convenience the faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering heavy loads. Easy handling swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers.. Type of pulley sealed ball bearings Sheave diameter 40 mm maximum usage load 3 x 2 6 kN Breaking load 36 kN Yield 93.