PCIE NVME adapterCompatible with M.2 PCIE NVMe M-KeyBM key SSDs. Note M.2 NGFF SATA is not supported PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.. Effective Heat DissipationAluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.. Wide Compatibility SupportPCIe 1X 4X 8X 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key BM-key. Note Not support MSATA and B KEY interface.. High Speed TransferThe M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum readwrite speed of 16Gbs theoretical value, greatly reducing the transfer time of large files. Note The actual transmission speed depends on the interface and working environment of the device.. Safe and StableSolid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size 14035mm LW, compatible with Windows 71011 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system..

Connect a low profile x16 PCI Express Card to an x1 slot. PCI Express X1 to X16 Low Profile Slot Extension Adapter. PCIe x1 to PCIe x16 Slot Extension adapter. Provides enhanced compatibility between motherboards and a variety of PCI Express expansion cards. PCIe slot extension adapter accommodates low profile x2, x4, x8, x12 or x16 PCI Express cards allowing you to install a PCIe card x1.

HIGH PERFORMANCE Install 2 PCIe 3.0 M.2 SSDs NVMe or AHCI into your workstation or server for readwrite speeds up to 3GBs and 2.8GBs for single-drives or 2.4GBs and 1.42GBs per drive for 2. WIDE COMPATIBILITY Dual M.2 PCIe SSD adapter card was extensively tested to ensure compatibility w Samsung 970 evo, 950 Pro, SM951, other 2242, 2260, 2280mm PCIe M-Key M.2 NGFF SSDs NVMe or AHCI. BACKWARD COMPATIBILITY Compatible w PCIe 1.0 2.0 and x8 or x16 slots, PCIe bifurcation is not required. Works with all workstation and server OS's such as Windows, Linux, and macOS incl. legacy. RAID FUNCTIONALITY M.2 PCI Express adapter lets you use SSDs individually or in a storage pool using OS or 3rd party RAID software supports RAID 0, 1, SPAN, JBOD for tieredhybrid storage. VENTED DUAL-PROFILE BRACKETS Pre-installed full profile bracket with low-profile half-height bracket in box vented design for better cooling, avoiding drive throttling and improving reliability.

RIITOP Dual NVMe PCIe Adapter allows you add 2x M.2 NVMe SSD to Mainboard via a single PCI-e x8 Slot. RIITOP Dual NVMe to PCIe Adapter Adopts ASMedia ASMedia ASM2812 Chipset, It does NOT depend on PCIe bifurcation supported by MOBO. Each SSD costs PCI-e 3.1 x4 Channel individually, non-interfering. The final speed depends on the SSD and the Mobo's PCI-e bandwidth. Compatible with M.2 SSDs PCI-e NVMe All Size 110x 22mm, 80x22mm, 60x22mm and 42x22mm. Hardware Requirement Available PCI-e 8x16x Slot on Mainboard, Compatible with PCI-e 3.02.01.0 standards. Please NOTE 1. This M.2 PCIe Adapter can Only Support M.2 PCI-e Based M Key Nvme SSD, DO NOT support PCI-e M Key AHCI SSD, SATA based BM key or B Key SSD. 2. Please download driver of SSD from the brand official website if Disk Management or Device Management can not show the SSD. 3. Old MB can not support Booting from NVMe, Please confirm the MB's specification 4. Each SSD costs PCI-e 3.1 x4 Channel, NOT whole PCI-e 3.1 x8. RIITOP M.2 NVMe Adpater lets you to use SSDs individually, Speed up to or in a storage pool for OS or 3rd party software RAID configuration. Does NOT support Hardware RAID.

Unparalleled 5 Gbps Speed Future-proof your desktop PC's wired connection with the 5 Gbps PCIe network card. It takes your connectivity to the next level with speeds 5 times faster than a typical Gigabit PCIe Ethernet card. Hyper-Fast Internet Access Experience boosted speed, reduced latency, and enhanced responsiveness with the PCIe network card, making your computer ideal for intense gaming and flawless streaming. Harness your ISP's speeds with added 5GBASE-T technology. Instant Local Network Transfer Whether integrated into your client PC or host server, the PCI Express network card establishes lightning-fast connections with other devices in your local network, elevating the efficiency of data transmission. Crafted for Maximum Reliability Enhanced with dense fins and high-quality aluminum construction, the PCIe nic optimizes heat dissipation, ensuring consistent performance and reliability. Supports Windows 11 10 Windows Server 2022 Simply install the driver from the included disc or download it from our website to achieve the full 5Gbps speed. Supports Wake on LAN and QoS. Important Note Works out of the box with any Linux distribution running kernel 6.9 released May 12, 2024 or newer. Linux expertise support is not provided.

M.2 NVMEM Key SSD to PCIe expansion card. Equipped with Aluminum heatsink can reach 5-20 degrees celsius cooling effect. Supports 2280226022422230mm M.2 SSD. PCIe4.0 x4 support PCIe x4 x8 x16 slot. Supports NVMe SSD, such as Samsung 950Pro960EVOXP941PM951PM961SM951SM961, Plextor M6e Series, Kingston HyperX Predator M.2 SSD and so on..

10 Gbps PCIe Network Card With the latest 10GBase-T Technology, TX401 delivers extreme speeds of up to 10 Gbps, which is 10 faster than typical Gigabit adapters, guaranteeing smooth data transmissions for both internet access and local data transmissions1. Versatile Compatibility With extreme speed and ultra-low latency, 10GBase-T is backwards compatible with multiple data rates 10 Gbps, 5 Gbps, 2.5 Gbps, 1 Gbps, 100 Mbps, automatically negotiating between higher and lower speed connections. QoS Quality of Service technology delivers prioritized performance for gamers and ensures to avoid network congestion for PC gaming. Free CAT6A Ethernet Cable To maximize TX401's performance, a 1.5 m CAT6A Ethernet Cable is includedrated for up to 10 Gbps while a regular cable is only rated for 1 Gbps. Low-Profile and Full-Height Brackets In addition to the standard bracket, a low-profile bracket is provided for mini tower computer cases. Comprehensive System Support - Fully compatible with Windows 11108.187, Windows Servers 201920162012 R2, and Linux to meet your diverse operating system needs. Industry leading 2-year warranty and free 247 technical support.

Dual M.2 NVMe to PCIe AdapterBy installing 2 M.2 NVMe SSDs on this M.2 PCIE adapter, your computer will be able to run 2 M.2 NVMe SSDs at the same time. Compatible with 2280226022422230 M.2 NVMe SSDs. Note Not support M.2 SATA SSD.. Safe StableThe solid capacitor for voltage adjustment can avoid current wave in case of SSD damage. The NVME PCIE card powers from PCI-E port for 2 NVMe SSDs for more stable operation. No external power adapter required.. Effective Heat DissipationCopper strips and multi-hole cooling design can lower the temperature produced by the SSD during operation. The 2 included heatsinks prevent the drive from getting too hot. The NVMe PCIe adapter will stabilize SSD performance and extend the usage life of the hard disk.. OS CompatibilityCompatible with a wide range of application systems including Windows 111087LinuxMac OS. Plug and play, no driver required. The new M.2 NVMe SSD needs to be initialized and formatted before it can be recognized by the computer host.. Product InformationCompatibility Support PCIe X1X4X8X16 slots. Suitable for M.2 NVMe M-Key and MB Key SSDs. Data Transfer Speed 5Gbps. Packing List 1 x PCIe M.2 expansion card, 1 x long baffle, 1 x short baffle, 2 x screws, 2 x heat sinks and 1 x screwdriver..

PCIE to M.2 adapterCompatible with 2230224222602280 M.2 PCIE NVMe M-KeyBM key SSDs. Note M.2 NGFF SATA is not supported PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.. Support ListExpansion card support PCIe 4X 8X 16X, M-KeyBM-key PCIE to M.2 adapter. Note PCI-E 1x and PCI slots are not supported MSATA and B-KEY interfaces are not supported.. High-speed TransferThe adapter uses the NVMe protocol and PCI-E lanes, the maximum read speed reaches 32 Gbps theoretical speed. This greatly reduces the transfer time for large files. Note The actual transfer speed depends on the device interface and working environment.. Safe and StableSolid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size 14035mm LW, compatible with Windows 71011 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.. Effective Heat DissipationAluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive..

SATA Expansion Card 4 PortsThis PCIE SATA card has two SATA 3.0 ports with 6Gbps transfer speed, suitable for both largesmall PC cases, compatible with Windows 11 10 8 7 Vista MAC NAS Linux OS etc, for PCI Express X1 X4 X8 X16. Note Only MBR boot is supported, UEFI boot is not supported.. Excellent Heat DissipationThe PCIE SATA expansion card built-in alloy material heatsink with large area to effectively dissipate excess heat, so that the two SATA ports are always at room temperature and work more stably.. High Efficiency PerformanceSupports AHCI mode and NCQ capabilities, this sata expansion card allowing you to increase the overall performance of your hard disk by 5-20. Supports hot-swapping and IDE mode programming interface.. Durable and Stable15U gold-plated conductor improves conductivity and reduces wear and tear, ensuring faster and more stable transmission. Thick PCB board resists high and low temperatures and will not deform after prolonged use.. Support System Compatible with Windows 78 3264 bit, Vista1110MAClinux. Does not support XPServer 2003. Equipped with a replaceable bezel to support 4U2U chassis. WindowsR XPServer2003Note Please make sure the product is compatible with your computer before purchasing. For products with SATA interface, WIN1011 does not need to install the system, and if you use WIN7, WIN8 and blue screen happens, you need to reinstall the system..

7 ports PCIe USB card There is a 2-phase independent power supply module, which can feed one interface per output port to escape power shortage. Can operate without an external or auxiliary power supply the seven interfaces operate independently and do not affect each other. Seven USB 3.0 Type A ports can be added externally to the PC case. Note Not compatible with PS3PS4.. High Speed TransmissionUSB3.0 theoretical speed up to 5Gbps, provides 10 times faster transmission speed than USB2.0. This usb expansion card enables quick access to files and transfer of HD movies, photos, music, etc.. Stable power supplyThe usb pcie card adopt NEC720201NEC720210 chip. The USB interface can supply 5V2A power to external devices. Solid capacitors with good performance are used for low impedance, low temperature stability, and high temperature wave resistance.. 7 independent solid capacitorsEach interface has a stable voltage solid capacitor to ensure a stable power supply. The dielectric material of the solid capacitors is made of conductive polymer material, which has the advantages of high stability, long life, and low ESR faster charging and discharging speed.. Wide compatibility PCI-E X1 X4 X8 X16 compatible. Note Not compatible with older PCI, backward compatible with USB 2.0 1.1, 64-bit and 32-bit Windows 11 10 8 7 XP Linux, not Mac compatible. Note WIN8 and WIN1011 users do not need to install the drive XP and WIN7 users can download, unzip, install, and complete. The corresponding installation directory for CD is DRIVERS201R30230.EXE..

How the ACTIMED Adapter workM.2 NVMe to PCIe Adapter Allows You to Connect NVMe SSD M-Keyto Your X1, X4, X8, X16 PCI-e Interface.. Component CompatibilityM.2 PCIE Adapter Offers support for Support 2230 2242 2260 2280 SSD, PCIE X1 interface supports 1X 4X 8X 16X slots, Compatible with Windows XP, 7, 8, 9, 10 and above and MAC OS.. Advance Heat Sink SolutionThe Aluminum heat transfer design allows for more effective cooling to happen. By maximizing cooling it allows for extremely powerful performance.. Support TypeACTIMED PCIE X1 Adapter Only for M-Key M.2 SSD NVMe SSD, Doesn't Support B-Key SSD and MB Key M.2 SSD.. Whats included1 x M.2 to PCI-E Adapter Includes heatsink, 1 x Standard bracket, 1 x Small bracket, 1 x Thermal pads, 1 x Screwdriver, Spare screws. SSD Not Included.

1. Wire advantages using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8Gbps stable transfer.. 2.Cable length from 10?cm to 100 cm can be customized, our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing.. 3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability.. 4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen.. 5.Suitable graphics card?GTX1080ti High-end graphics CARDS, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional graphics card, support for all the PCIe CARDS after 2015 years.Note This product does not support external notebook graphicsOur all cables doesn't support the machine with 2x CPUs..

With this AMPCOM M.2 NVMe SSD PCI-E 4.0 X4 Adapter, you could add a NVME SSD on your motherboard without M.2 slot.. With the channel of PCIe 4.0 X4, the speed will be enhanced up to 64 Gbps, 7000 MBs random Read and 6000 MBs Write Max, improved computer performance, backward compatible with PCIe 1.0 2.0 3.0. Multi-layer PCBA, Multi-layer protection Overcurrent protectionOvervoltage protectionShort circuit protectionEMI Electromagnetic Interference protection, Heatsink layer for overheat protection . Maximum protection of M.2 NVMe SSD from electrical signal interference.. No driver required for Win10, plug and play, supports NVMe SSD, such as Samsung 980 Pro 970 EVO950Pro960EVOXP941PM951PM961SM951SM961, Seagate Firecuda 520 series, Intel SSD67 Plextor M6e Series, Sabrent Rocket NVMe 4.0, WD_BLACK SN850 and so on.. Package include 1 Adapter, 1 Profile, 1 Cabinet screw, 1 SSD screw, 1 Screw driver.

You can use NVME SSD with this adapter without M.2 slot on the motherboard. Supports PCIe Gen4Gen3 and PCIe Gen2 M.2 NGFF 80mm, 60mm, 42mm SSD. Come with heat sink and thermal pad, can realize NVME SSD's full potential of its high performance. Support Windows XP 7 8 10, No driver required. Only Support M.2 NVME SSD Key M, DO NOT support M.2 SATA SSD Key B. If you would like to use NVME M.2 SSD as boot drive, please confirm your motherboard wit CSM function before buying..

Turbo fan upgrade coolingIncrease the aluminum casing and turbo fan to enhance the heat dissipation efficiency, multi-directional 3D three-dimensional heat dissipation, and lower temperature.. SK8 transfer expansion cardSupport M.2 NVME SSD M-key, compatible with PCIe 4.0 motherboard, backward compatible with PCIe 3.02.01.0, support 223022422260228022110 length M.2 NVME SSD.. PCI Express physical interfaceUpgrade compatible PCIE X4X8X16 slot installation to meet the needs of different players, and M.2 SSD is reliable at full speed and does not require a driver.. PClE Bracket designUse screws to fix, provide a stable support for the M.2 SSD adapter card, block dust from entering, and extend the service life.. High heat dissipation and easy installationAdopt double-sided copper hole convection heat dissipation, strong heat dissipation and adaptability, plug and play, easy installation..

Insert the PCIe to USB 3.2 gen 2 card into the PCI Express 4X slot, you can upgrade desktop computer to 3x USB C and 2x USB 3.2 ports.On this basis, make more devices connected to computer systems,such as external hard drive,printer,scanner,tablet,smart phone,USB VR,game controller,etc.. SuperSpeed USB 3.21x USB Type-C port and 2x USB Type-A ports share 10Gbps bandwidth together, and the rest 2x ports share another 10Gbps bandwidth, PCIe card with total bandwidth up to 20Gbps. Each port supports transmitting data at a rate up to 10Gbps when used solely. This USB expansion card is a necessity for external hard drives and is ideal for file transfers. Note Actual transfer speed may be limited by the connected device.. Extensive compatibilityThis card Comply with PCI Express X4,X8,X16 slot. USB 3.2 port is backward compatible with 3.0 and 2.0. Operating system compatible with Windows 7, 8, 10 3264 bit and Mac OS 10.8.2 Above. When the pci-e adapter card is installed, Win 10, Mac OS and Linux do not need a driverWindows 7 system must install the drive.. Intelligent protectionEach interface has independent insurance, with over-current and short-circuit intelligent protection to protect your computer equipment. In addition, a low-power USB device connection does not require an external power supply. Easy to install, The card can be powered directly from the PCIe slot on the motherboard.. What You Get1x USB 3.2 pcie expansion card,1x CD drive, 2x installation screws,1x user manual and 180 day warranty..

Flex cable design allows a LP or full size PCI card to work on PCI Express slot. Jumper to select PCI 3.3V or 5V for PCI device. PCI 2.3 compliant with up to 133MBps. Plug and play,no driver needed.