Compatible VehiclesJDMSPEED Adjustable Rear Panhard Track Bar with polyurethane bushings Compatible with 2000-2020 Chevy Suburban 15002500, compatible with 2000-2020 Chevy Tahoe, compatible with 2000-2020 Chevy Avalanche, compatible with 2000-2020 GMC Yukon, compatible with 2000-2020 Cadillac Escalade, compatible with 2000-2020 Hummer H2.. FunctionJDMSPEED Adjustable Rear Panhard Bar allows for laterally centering the rear axle housing after lowering or lifting the ride height and it's the best component for serious handling and towing performance. It allows for lateral alignment of the rear end for clearance when running larger tires and greatly increases the rear end's lateral stability.. Polyurethane BushingsAdjustable Rear Panhard Track Bar Kit with polyurethane bushing is very wear-resistant and improves handling.. Durable MaterialThe bar is powder coated bright red for a brilliant and durable finish, made from high strength steel to proof rust and corrosion for extended lifespan.. NoticePlease make sure to check fitment If you have any question, please contact us..

Fits For Jeep Wrangler 2007-2018 JK 2Door 4Door with Factory Bushing.. Quality Forged Steel, Factory Style Bushing, Adjustable Sleeved Collar, Double Stronger than Factory Track Bar.. Adjustable Track Bar Fully adjustable on the vehicle. No removal required, no trial and error lining it up, and no more wasted time just to dial in your bar.. Easy to Install Simply attach to the vehicle and dial in your adjustable bar using our clamp. Can be Used with OE Wheels and Back Spacking.. Placement on Vehicle Rear..

Corrects Suspension Geometry After Lift Designed to keep the front axle centered under the chassis when your Jeep Wrangler JLJLU or Gladiator JT has a 04 suspension lift restores proper axle alignment and handling after lifting.. Heavy-Duty Steel Construction Built from high-strength steel tubing DOM with precision forming to maintain clearance and correct geometry around the front suspension engineered for robust on- and off-road use.. Adjustable for Perfect Fit Length-adjustable design lets you fine-tune track bar position to match lift height and alignment requirements without removing the bar from the vehicle in many cases.. Premium Bushings for Smooth Ride Equipped with quality bushings that reduce noise, vibration, and harshness NVH while maintaining lateral axle support improves ride comfort and long-term durability.. Bolt-On Installation with OE-Style Fitment Direct-fit design uses factory mounting points no major modifications required. Recommended alignment after installation ensures optimal steering performance..

Fitment for Jeep Cherokee XJ 2WD 4WD 1984-2001 not fit RHD. Suit 4-6.5 Lift Front track bar will properly center the axle after you install a lift leveling kit. Length is adjustable 790-830 mm eye-to-eye, perfect for XJ with 4-6.5 inches of suspension lift. Great for Off-road Brand new track rod can directly replace your old worn bar, prevent unwanted lateral movement of the axle assembly, help eliminate bump steer and steering wobble for lifted Jeeps. High Strength Material Heavy-duty tubular track arm features a Heim joint end and a high-quality poly bushing end, effectively improving steering performance. The powder-coated surface is resistant to rust and corrosion, provides a long-lasting service life. 247 Tech Support Package includes 1 x front adjustable trackbar and 1 x relocator bracket, instruction is available for download. maXpeedingrods provide lifetime technical support and 1-year limited warranty for quality-related issues from the date of purchase. Contact us if you have any questions. Replacement Bushing Available We understand suspension bushings are critical for a safe and comfortable ride. As a responsible seller, we pay serious attention to your driving safety If your bushing wears out from normal use, contact us ASAP for new replacement bushings.

Fit for Jeep Cherokee XJ 2WD 4WD 1984-2001 not fit right hand drive model. Front track bar will properly center the axle after adding a 4-6.5 lift leveling kit. With an adjustable length of 790-830 mm eyelet-to-eyelet and relocation bracket, this adjustable track rod is easy to adjust for the lift you had. Directly replace your stock track bar, prevent unwanted lateral movement of the axle assembly, also help eliminate bump steer and steering wobble. Tubular track bar features a Heim joint end and a PU bushing end, improve control and steering performance. Powder coat surface is resistant to rust and corrosion, built to last longer than stock bars. 247 Tech Support maXpeedingrods provide lifetime technical support and 1-year limited warranty for quality-related issues from the date of purchase. Contact us if you have any questions.

Fit for Jeep Wrangler TJ 1997-2006 not fit right hand drive vehicles. Length Adjustable Range is MAX 34 inch MIN 31.37 inch Accommodates 1''-6'' of Vehicle Lift. Adjustable for proper fit. Directly replace your stock track bar, prevent unwanted lateral movement of the axle assembly, also help eliminate bump steer and steering wobble. Tubular track bar features a PU bushing end, improve control and steering performance. Powder coat surface is resistant to rust and corrosion, built to last longer than stock bars. 247 Tech Support maXpeedingrods provide lifetime technical support and 1-year limited warranty for quality-related issues from the date of purchase. Contact us if you have any questions.

Supreme Durability---Crafted from top-quality, locally sourced materials, our suspension components ensure unwavering reliability and a long lifespan.. Widely Compatible---Perfectly tailored for 2009-2024 RAM 1500, and 2020-2024 Jeep Gladiator JT, offering seamless integration.. Smooth Driving Experience---Revamp your ride with Our Control Arm Kit, designed for enhanced stability and comfort, accommodating larger tires and lifts.. Full Customization---Engineered for flexibility, our adjustable arm kit supports lifts up to 6 inches, guaranteeing optimal handling without compromise.. Direct Fitment without Issues---Avoid the binding problems of OE control arms with our lift kit-compatible design, ensuring a smooth and hassle-free upgrade..

Rod End Heim Joint Kit2 right hand thread and 2 Left hand thread Heim set along with jam nut spacers that are zinc coated to offer more durability and tube adapter.. Max Load CapacityThe panhard rod end kits are heat treated and hard chrome plated to provide a longer use. 28,000 Pound static load rating for heavy-duty performance.. AdaptabilityThe rod end is with 34 shaft with 16tpi. 34 bore is the strongest way to make this heim. Fits Tube Size 1 14 OD.x .120 Wall x 1.01ID. Mounting width is 1-78.. Widely UseThe 34 rod ends heim joint kit is great for steering and suspension ,traction bars, traction bar kit, panhard bar, steering joints, johnny joint, tie rod, and links joints on hot rods.. Customer ServiceAny questions about our Heim Joints Rod End Kt. Please feel free to contact us. We will reply to you as soon as possible within 24 hours..

Sturdy Fitment---Engineered for 1994-2001 Dodge Ram 1500, 2500, 3500 4WD, ensuring precise alignment and compatibility. Wobble Reduction---Adjustable panhard bar effectively centers the front axle, eliminating side-to-side drift and steering instability. Durable Construction---Crafted from robust steel with powder coating, resistant to rust and corrosion, delivering enhanced durability and longevity. Complete Kit---Includes front adjustable track bar, relocation bracket, and all necessary bolts, ensuring a hassle-free installation professional installation advised. Customer Care Safety Focus---Enjoy lifetime technical support and a 1-year limited warranty. Replacement bushings available upon request for optimal safety and comfort.

Fitment for 2007-2018 Jeep Wrangler JK JKU 2 Door4 Door with 0-6 lifts. For 0-6 Lift Front track bar is fully adjustable from 820 to 860 mm eye-to-eye32.2-33.8, fits stock height and vehicles with up to 6 inches of suspension lift. Easy to adjust, allows you to install larger tires and rims, maintain track and improve driving safety. Reduce Wobble Adjustable track bar helps center the axle and keep it from drifting side to side, direct replacing the worn bar and eliminating steering wobble in the drive line. Preinstalled rubber bushings help retain factory ride quality. Strong Construction Features strong steel material for high strength with 12 mm wall thickness and 38 mm O.D. Powder coat surface prevents rust, chips, and corrosion. This JK track bar ensures high performance on rough roads. 247 Customer Support An installation video is available for viewing on the product page. maXpeedingrods offers lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Feel free to contact us if you have any questions.

Fitment for 2007-2018 Jeep Wrangler JK JKU 2 Door 4 Door with 0-6 Lift. Adjustable Design Perfectly center your car's front axle after adding lift leveling kits. This front track rod is fully adjustable for vehicles at stock height and with up to 6 of suspension lifts. Strong Construction Features strong steel material for high strength with 38mm1.49 outer diameter. Powder coat surface prevents rust, chips, and corrosion. This JK track bar ensures high performance on rough roads. Package Includes 1 x Front adjustable track bar. An installation video is available for viewing on the product page.. 247 Customer Support maXpeedingrods offers lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Feel free to contact us if you have any questions.

Upgrade Your Riding Experience Universal 4 link fits Hot Rod Hot Rat Truck Classic Car Air Ride. Provide a safe and quality ride, Panhard bar improves handling with better cornering. Parallel 4 Link Bars Panhard Rod 4 links are 24 long, DOM tubing outside diameter is 1.25 with thickness .156, metal bracketsplates are .197 thick. Panhard bar is adjustable from one end with the adjusting nut. Strong Steel Structure 4-Link suspension links are made of heavy-duty steel material, zinc plated ends have urethane bushings, built to last longer. Full Package Steel bars, 24 Panhard bar, rod ends wurethane bushings, steel axle mounts and fame mounts, steel center link axle mounts, 58 hex head hardware with nylon nuts. Note No instructions included, please let us know if you have any questions.

Fitment for Jeep Cherokee XJ 1984-2001, for Jeep Wrangler TJ 1997-2006. Suit 1.5-4.5 Lift This front track rod can be adjusted from 32.28 to 33.46, for Jeeps installed with 1.5 to 4.5 inches of suspension lifts to help keep the axle centered. Solve Wobble Issue Replace your vehicle's worn track bar can help to solve steering wander, death wobble, and alignment issues. Improve off-road capability, allows you to install larger tires while properly setting your track. Strong Steel Front trac bar has 1.25 O.D. and 0.24 wall tubing, the tubular steel design and anti-rust powder coating ensure high strength and durability. Rubber bushings are preinstalled to absorb noise and vibrations, providing a more comfortable ride. 247 Tech Support maXpeedingrods offers lifetime technical support and 1-year limited warranty for quality-related issues from the date of purchase. Feel free to contact us if you have any questions. Replacement Bushing Available We understand suspension bushings are critical for a safe and comfortable ride. As a responsible seller, we pay serious attention to your driving safety If your bushing wears out from normal use, contact us ASAP for new replacement bushings.

Vehicle Fitment Designed for Ram 1500 09 , this fixed rear panhard track bar eliminates lateral axle movement, ensuring precise alignment, improved handling, and superior rear-end stability for daily driving, towing, and light off-road use.. CORE Advantage Reduces body roll and enhances steering response by keeping the rear axle centered under all conditions. Greaseable polyurethane bushings absorb vibrations, minimizing NVH for a smoother, more controlled ride.. Adjustability Fixed-length design is ideal for stock, leveled, or lowered setups up to 2, maintaining proper suspension geometry without additional modifications.. Construction Built from high-strength cold-rolled steel with greaseable polyurethane bushings at both ends, reducing NVH while ensuring consistent and predictable axle alignment. Designed for long-term durability and performance.. Two-Stage Powder Coating Zinc primer base and top coat available in 10 vibrant colors protect against corrosion and allow for personalized styling of your rig..

Adjustable design for precise axle centering on vehicles lifted 0-4. Easy adjustment even when installed on vehicle. Enhances rear axle stability and alignment for improved handling and performance.. Durable, heavy-duty construction ensures long-lasting performance and reliability.. Easy bolt-on installation with no drilling or welding required.

Adjustment Range - 3 Degree. There are grooves inside the bushing to keep the grease in the bushing even under heavy load.. Inventory control arms with soft rubber bushings tend to deflect and absorb power under load rather than transfer it to the tires. Compared with the stock rubber bushing, this upper control arm adds a solid and more sensitive touch.. With our upper control arm, it is easier to start, reduce wheel runout and increase cornering consistency for your car.. These grooves also guide grease to the outer edge of the bushing, thus maintaining lubrication of the thrust surface. This effective lubrication ensures quiet and reliable operation of the bushing throughout its service life..

Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0. 75,0.875, 1. 125. It is applicable for roof racks, roll cages, bull bars, handlebars on an ATV, UTV and trucks. High Compatibility Compatible with various types of light bar brackets, the 10mm screw hole diameter fits all light with 8mm mounting screws. Perfect Fit Rubber Inserts Rubber insertsstrip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp. Making installation easier and always protecting the metal from being worn down. Built With Quality Clamps are built using precision-welded cast sturdy aluminum, makes it lightweight, but pretty neat and durable. Make Light Mounting Easier With the high compatible bar clamp, youre free of the hassle of lighter mounting and drilling holes in your vehicle body Simple all in one kit, make your life easier.

The Suspension Track Bar RodAdjustable Panhard Bar Made in Carbon Steel wPoly Bushing,Self-Lubricating Bushings ensures product never wears out. Front Adjustable Track Bar,Front Track Bar,Track Panhard Bar, Adjustable Track Bar,Replacement For Ford F-250 SUPER DUTY 2WD 4WD 1999 2000 2001 2002 2003 2004,This is Aftermarket Replcement Part,Direct Replacement. This adjustable track bar allows for properly centering the axle of your 2 to 6 inch lifted truck. Actual adjustment is from approximately 31.2inch-33.8inch. Stabilizes the Axle Helps Maintain Correct Steering Alignment,Reduces in most cases eliminates Death Wobble Axle Shake. Note Will not fit vehicles produced before 311999Not for truck with stock height.

Fitmentfor 2007 2008 2009 2010 2011, 2012 2013 2014 2015 2016, 2017 2018 Jeep Wrangler JK. Superior quality, extra heavy-duty replacement for original fixed length panhard rod Variable length design properly aligns axle housing with chassis and prevents undue stress on related components. Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearanceSpherical urethane bushing for unrestricted travel and high performance urethane for steering responsiveness. Package Included Adjustable Front Track Bar x1 Adjustable Rear Track Bar x1Hardware Kit x1. Placement on VehicleFront Rear, Left, RightFully adjustable on the vehicle.No removal required, no trial and error lining it up, and no more wasted time just to dial in your bar.

Protect Your Lights Keep your light bars protected from scratches, rain, fog, dust, snow, and other damage with our LED light bar protective cover. Stand Out Stay Legal Our black cover with smooth clean outlook and with unique Nilight logo, gives your vehicle a cool and unique look that will make it stand out from the crowd. Can ensures that the light bar comply with road traffic regulations, avoiding penalties from traffic enforcement agencies due to the lights not being legally protected. Premium Quality Made of high quality nylon oxford fabric and soft velvet fabric of awesome protects.Being soft to the touch, scratch-resistant, Waterproof, dustproof, snowproof. Can withstand outdoor elements and ensure long-term use. Easy to Install Just wrap the cover around the light,go around the bottom mounting bracket and attach the magic sticker tightly.If It fits securely, dont have to worry about it falling off by strong wind. Wide Compatibility Light cover length is 33 inches, universal fit for Nilight around 32 inches two or three rows straight and curved light bars height around 3 inches width around 3.5 inches. If used for other brands' light bars or shorter and thinner lights, the cover may be too long or too loose. To ensure a proper fit, please measure your light bar's exact length, width, and height before purchasing.

There are grooves inside the bushing to keep the grease in the bushing even under heavy load. These grooves also guide grease to the outer edge of the bushing, thus maintaining lubrication of the thrust surface. This effective lubrication ensures quiet and reliable operation of the bushing throughout its service life.. Made of heat-treated carbon steel to increase the hardness and strength Professionally Precision WeldedImprove maneuverability and Service life, and more suitable for harsh high and low-temperature environments. The Track Bar Made in Carbon Steel, Self-Lubricating Bushings ensures product never wears out Stronger, yet lighter than stock, greatly increases the rear end's lateral stability. Compatibility They can compatible with Chevrolet Trailblazer SSR 2002-2009, for GMC Envoy 2002-2009. Kit Includes 1X Single Adjustable Panhard Bar.

There are grooves inside the bushing to keep the grease in the bushing even under heavy load. These grooves also guide grease to the outer edge of the bushing, thus maintaining lubrication of the thrust surface. This effective lubrication ensures quiet and reliable operation of the bushing throughout its service life.. Made of heat-treated carbon steel to increase the hardness and strength Professionally Precision WeldedImprove maneuverability and Service life, and more suitable for harsh high and low-temperature environments. The Track Bar Made in Carbon Steel, Self-Lubricating Bushings ensures product never wears out Stronger, yet lighter than stock, greatly increases the rear end's lateral stability. Compatibility They can compatible with 2005 - 2014 Ford Mustang. Kit Includes 1X Single Adjustable Panhard Bar.

Vehicle Compatibility Compatible with 1994-2001 Dodge Ram 1500 4WD Compatible with 1994-2002 Dodge Ram 2500 4WD Compatible with 1994-2002 Dodge Ram 3500 4WD. Durable Construction Crafted from heavy-duty steel for superior strength and protection. Features a powder coated finish that effectively resists rust, ensuring long lifespan and lasting performance. Adjustable Design Precisely engineered for 4.5 to 8 vehicle lifts. The adjustable design ensures that axle alignment can be corrected even after installation without repeated disassembly, ensuring a great match with your lifted vehicles suspension. Upgraded Performance Tubular design with self-lubricating bushings ensures easy maintenance, exceptional stability and strength. This track bar can stabilize the axle, maintain correct steering alignment, and reduce or eliminate Death Wobble Axle Shake for a smoother, safer driving experience. Simple Installation You will receive 1 x Adjustable Track Bar, 1 x Relocator Bracket. Mounting hardware and instructions are included. Screw installation. No complicated tools or expertise required.

You could use this Panhard Bar on almost any street rod. Required for coil spring and coil-over rear suspensions. Complete kit includes rod, brackets and 58 hardware. Features a 22.5 long bar. Keep your axle located with this awesome kit.

Robust Construction Features a 1-18 OD 4130 Chromoly tube with a .058 wall thickness, offering maximum strength and durability for demanding racing conditions.. Adjustable Design Equipped with 34-16 RH and LH threaded ends for easy length adjustment by spinning the tube, allowing for precise customization to fit various racing vehicle requirements.. High-Performance Rod Ends Includes two 34 two-piece carbon steel rod ends with a hardened steel ball for metal-to-metal contact, minimizing slop in high load applications and enhancing overall performance.. Versatile Length Options Available in a range of tube lengths from 9 to 37, this kit is designed to meet the specific requirements of different racing classes, including IMCA Modified and Sport Mod.. Easy Size Selection Guide Note that the Length refers to the tube length customers should subtract 4 from the desired working or eye-to-eye length when selecting a tube to ensure the bar is in the middle of the total adjustable range, optimizing fit and function..

26-12 INCH ADJUSTABLE LENGTH J-shaped panhard bar adjusts to a maximum length of 26.5 inches, allowing you to adjust rear axle positioning in racing or custom suspension setups.. J-BAR CLEARANCE DESIGN J-shaped configuration provides additional clearance around suspension components and chassis parts compared to straight track bars.. 34 INCH HEIM JOINTS INCLUDED Features durable 34 rod ends on the bent end with an additional heim and jam nut included for the adjustable end of the bar.. SOLID STEEL CONSTRUCTION Heavy-duty steel track rod construction provides strength and durability for demanding racing and performance suspension applications.. CUSTOM LENGTH CAPABILITY Straight end can be shortened as needed with a welded threaded slug, making it adaptable for a wide range of chassis and suspension layouts..

COMPLETE RACING KIT Includes 32-inch swedged chromoly tube, carbon steel rod ends and jam nuts, providing everything needed to assemble a Panhard bar.. HEAVY-DUTY CHROMOLY TUBE Built from 1-18 O.D. 4130 chromoly with .058 wall thickness for exceptional strength in demanding racing conditions.. ADJUSTABLE RHLH THREADS Features 34-16 RH and LH threaded ends allowing quick length adjustments by simply rotating the tube.. ROBUST ROD ENDS Equipped with two 34 two-piece carbon steel rod ends with hardened steel balls for precise metal-to-metal movement and reduced play.. IMCA-READY DESIGN Suitable for IMCA Modified and Sport Mod applications part of a full lineup available in lengths from 9 to 37 for custom setups..

Item Package Dimension 41.99L x 4.99W x 4.99H inches. Item Package Weight - 20.04 Pounds. Item Package Quantity - 1. Product Type - AUTO PART.

Track Bar.

Top Quality MaterialRight hand and left hand threaded CNC machined 4140 chrome moly double adjuster threads into 4130N chrome moly TIG welded threaded tube adapters for maximum thread strength.This is the highest quality, easiest to adjust on-the-truck panhard bar on the market.. Fitment Compatible with 2000-2006 Suburban 1500 2WD 4WD, 2000-2006 Suburban 2500 2WD 4WD, 2000-2006 Tahoe 2WD 4WD, 2000-2006 Avalanche 1500 2WD 4WD, 2000-2006 Cadillac Escalade 2WD 4WD. FunctionReplace the factory's weak, stamped steel, rubber bushed, flexible panhard bar with one of our heavy duty adjustable set-ups.Our adjustable rear panhard bar allows for centering the rear axle housing after lowering or lifting the ride height and it's the best component for serious handling and towing performance.It also allows for lateral alignment of the rear end for clearance when running larger tires and greatly increases the rear end's lateral stability.. FeaturesConstructed of 1.25 x .095 wall DOM tubing.Stronger, yet lighter than stock.Polyurethane bushings fluted with grease fittings for easy lubrication.. Easy to InstallEasy 100 bolt in installation with the use of basic hand tools..

Package Weight 6.350 kilograms. The package length is 11.176 centimeters. The package height is 123.19 centimeters. The package width is 11.176 centimeters.

The Package Height of the Product is 92.71 centimeters. The Package Length of the Product is 11.43 centimeters. The Package Width of the Product is 11.43 centimeters. Package Weight 6.622 kilograms.

1998-2002 CamaroFirebird. Non-Adjustable. Red.

1982-2002 CamaroFirebird. On-Car Adjustable. Black.

Fits 2005-2014 S197 Mustangs. On-car adjustable design. Allows for proper centering of the axle housing on lowered vehicles. Eliminates Panhard Rod deflection. Proudly made in the U.S.A..

Fits 2005 - 2014 S197 Mustangs and 2007 - 2014 Shelby GT500. Provides additional support to Panhard bar mount.. Built from boxed steel for additional strength. MIG-welded.. Designed for street performance, drag race, and road race applications. Durable red or black hammertone powdercoat finish.. 1-hour installation time. Durable powdercoat finish. Proudly made in the U.S.A..

Made of steel with natural finish. 30 inches overall length, which can be shortened. Eliminates housing movement within chassis. Includes gussetted mounting brackets, spherical rod ends, hardware, and instructions.

Superior ReplacementThis new Rear Adjustable Track Bar is made of forged steel and features rubberized durable rubber bushings for longer life than the OEM. This reinforced design allows the bar to keep the axle tamed even under sheer off-road torture.. Fits more years of VehiclesRear Adjustable Track Bar Panhard for 2009-2024 RAM 1500 Classic, 20-24 Jeep Gladiator JT and Fits Vehicles with 0-4 Lift Kit. High-Quality ConstructionThis Adjustable style Rear Track Bar installs in minutes, allowing you to upgrade almost immediately. Our new bar is fully adjustable on the vehicle this means no removals, no trial and error, and no more wasted time just attaching to the vehicle.. Installation and WarrantyOur Rear Adjustable Track Bar is easy to install and even easier to adjust When you choose one of our products, you get more than just a quality product at an affordable price. You also get peace of mind, please contact us with any questions we provide you with the best after-sales service..

This Panhard bar kit comes with everything needed to build a Panhard bar for your IMCA Modified or Sport Mod. 1-18 OD chromoly tube with .058 wall thickness ensures maximum strength. 34-16 RH thread in one end and LH thread in the other allow for length adjustment of the assembly by spinning the tube. 34 two piece carbon steel rod ends with a hardened steel ball are metal to metal contact to reduce slop in high load applications. Available in tube lengths from 9 to 37.

Fits 2005 - 2014 S197 Mustangs and 2007 - 2014 Shelby GT500. Provides additional support to Panhard bar mount.. Built from boxed steel for additional strength. MIG-welded.. Designed for street performance, drag race, and road race applications. Durable red or black hammertone powdercoat finish.. 1-hour installation time. Durable powdercoat finish. Proudly made in the U.S.A..

Wide Vehicle Compatibility Fit for 20072014 Chevy Suburban 1500 2500, Tahoe, Avalanche, GMC Yukon, and Cadillac Escaladeperfect for lifted, leveled, or factory-height setups.. Adjustable Rear Upper Lower Control Arms Allows precise rear axle positioning and pinion angle adjustment, improving traction, ride quality, and overall handling.. Includes Rear Adjustable Panhard Track Bar Centers the rear axle after suspension modifications to correct alignment, reduce side-to-side movement, and enhance stability.. Heavy-Duty Construction for Maximum Strength Built from high-strength steel with reinforced welds and a corrosion-resistant finishdesigned to handle harsh road and off-road conditions.. Direct Bolt-On Installation Engineered for a straightforward bolt-on fit using factory mounting points..

Includes Panhard Bar. Weld On, Universal Design. Custom Fabrication Will Be Needed For Install. 24 Bars Left and Right Hand Threaded Ends. 58 Button Head Cap Screw Hadware with Nyloc nuts included.

Fits 1982 - 2002 Chevrolet Camaro Pontiac Firebird F-body. Replaces the factory stamped steel control arms with stronger tubular steel units. Includes 2x rear control arms and 1x rear panhard rod pre-loaded with high-density polyurethane bushings. Fabricated from tubular steel and pre-loaded with high-density polyurethane bushings for superior, lasting durability. Comes with detailed Installation Instructions.

1982-2002 GM F-Body. DOM Tubing. Polyurethane Bushings. Black Hammertone. Large Diameter 1.25 DOM Tubing.

Part number KPR068. Fit type Vehicle Specific. Package Weight 4.649 kilograms. Included components panhard brace.

Straight steel panhard bar, 26-12 eye-to-eye. Big 34 heims. This kit includes Steel Sleeve for 34 heims, 34 LH male standard heim, 34 RH male standard heim, 34 LH raw jam nut, 34 RH raw jam nut. If your application requires the use of misalignment spacers then 910-07000 would be the best one for you. This fine piece can be used on a plethora of applications.