PCIE NVME adapterCompatible with M.2 PCIE NVMe M-KeyBM key SSDs. Note M.2 NGFF SATA is not supported PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.. Effective Heat DissipationAluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.. Wide Compatibility SupportPCIe 1X 4X 8X 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key BM-key. Note Not support MSATA and B KEY interface.. High Speed TransferThe M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum readwrite speed of 16Gbs theoretical value, greatly reducing the transfer time of large files. Note The actual transmission speed depends on the interface and working environment of the device.. Safe and StableSolid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size 14035mm LW, compatible with Windows 71011 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system..

Boost system performance Easily increase system performance by adding the speed of an M.2 SSD in any 2.5 SATA application with the M.2 SSD to 2.5 inch SATA Adapter. Broad compatibility The M.2 to SATA converter supports full length M.2 SDD solid state drives and can mount multiple drive heights, including 2230, 2242, 2260, and 2280. Increased transfer speeds Utilize the full potential of your SATA III controller, with an M.2 SSD, reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps. Hassle-free setup This M2 hard drive adapter offers a fast an easy setup with no drivers to install. The mounting hardware is also included in the M.2 SSD to SATA adapter. Open frame design Designed to maximize heat dissipation, the M.2 NGFF SSD to 2.5 inch SATA adapter converter will help protect the health of your hard drive.

Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface. Dual-Slot M.2 to SATA Adapter supports multiple RAID modes RAID 0 RAID 1 or spanning or JBOD. Supports B key M.2 SATA SSDs including full-length M.2 SSD drives 2230 2242 2260 2280 Not compatible with M.2 NVMe or AHCI PCI-Express SSDs. TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support. M.2 Adapter M.2 SSD Adapter M.2 SATA Adapter Dual M.2 to SATA Adapter M.2 Drive to SATA Adapter Dual SSD Adapter M.2 SATA SSD m 2 adapter m 2 to SATA.

Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key BM based on SATA or PCIe. Hyper Kit Storage controller,Ultra PCI-E Card PCIe 3.0 x4,The card only work for PCI-E SSD.Not work for SAS or Slimeline SAS HD. This U.2 M.2 converter enables two different usage applications.. One M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5 HDD. The converter can be installed into the system internally through the SFF-8654 Slimeline interface.. One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5 HDD. The converter can be installed into the system internally through the SATA 22pin interface..

M.2 to USB Adapter, RIITOP M2 SSD to USB 3.1 Card Reader Compatible with Both NVMe PCI-e Channel BM Key SATA Channel SSDallows adding NVMe or BM Key M.2 SSD to your PC via USB 3.1 3.0 Type-A Port at perfect performance. Chipset and Speed - RIITOP NVMe to USB Adapter Adopts Realtek 9210B Master chip, USB3.1 GEN2 transmission. It will be reduced to USB 3.0 Speed if connecting to USB 3.0 Type-A but not USB 3.1 Type-A Port. Compatible with M.2 SSDs Both NVMe and BM key SATA 80x22mm, 60x22mm and 42x22mm. Compatible with M.2 SSDs NVMe and BM Key SATA 80x22mm, 60x22mm and 42x22mm. Such as PM961, 960EVO, such as Samsung 970 EVO 950Pro 960Evo XP941 PM951 PM961 SM951 SM962, WD Black NVMe SSD and Samsung 860 EVO, WD SATA M.2 SSD. Note This M.2 NVMe SSD to USB Adapter adopts M key Socket, but can support both M.2 PCI-e Based M Key Nvme SSD, and SATA based BM key or B Key SSD. Package including 1x M2 to USB Adapter, 1x silicone pad, 1x screwdriver.

Note It doesnt support M.2 NVMe PCIe SSDs. Convert an m.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD. Added protection for your SSD with enclosed housing.

CONVENIENCE 100 Tool-Free, quickly install and remove SSDs without any tools.. DESIGN Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.. COMPATIBILITY M.2 form factor compatible with both SATA and NVME in sizes 224222602280.Thunderbolt 3 compatible. SPEED USB 3.2 supports data transmission speeds of up to 10Gbps for steady and efficient data transfer. Backward compatible with USB 3.1 and USB 3.0 at respective speed limits.. PLUG PLAY No additional drivers required. Bus powered. Does not need an external power supply. Perfect for tech nerds, 4K content designers, and engineers. At up to 1000MBs, Data copy and transferring will be done in in no time..

Applicable SSD - This M.2 SSD Enclosure only for NVMe M-Key M.2 SSD PCIE-based. Applicable to sizes 2242 2260 2280 solid state drivers. Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.. Type C interface- Both side can be inserted USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps.. Aluminum Alloy Shell- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry. Blue Indicator- Blue Indicator shows the data transfer status, easy and clear. High Quality Master Chip- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and exteend the lifetime of SSD. Compatible Multi OS, Windows 7 8 8.1 10 Linux MAC..

M.2 NVMEM Key SSD to PCIe expansion card. Equipped with Aluminum heatsink can reach 5-20 degrees celsius cooling effect. Supports 2280226022422230mm M.2 SSD. PCIe4.0 x4 support PCIe x4 x8 x16 slot. Supports NVMe SSD, such as Samsung 950Pro960EVOXP941PM951PM961SM951SM961, Plextor M6e Series, Kingston HyperX Predator M.2 SSD and so on..

CompatibilityThis M.2 SSD Enclosure only for M.2 NVMe M-Key SSD. Applicable to size 2230224222602280 solid state drivers. DO NOT Support M.2 SATA and Any SSDs with Heat Sink.. 10Gbps Transmission SpeedThis NVMe M.2 Enclosure equips with USB 3.1 GEN2 Type-C output interface, the theoretical speed is 10Gbps, support UASP and TRIM. Backward compatible with USB 3.1 GEN1 and USB 3.0 up to 5Gbps.. Aluminum Alloy ShellThis External Hard Drive Reader Case has aluminum alloy shell, slim design, durable and excellent heat dissipation, portable and easy to carry.. Tool-FreeThis external ssd enclosure allows quick and easy installation of M.2 NVMe SSDs, no need tools or drivers. Note Please format the M.2 SSD when you first use it.. FeatureAuto Sleep Plug Play 4TB Capacity 2-in-1 Type-C Cable Support Mac OS, Windows, Linux Item Size 11x3.75x1.25cm Item Weight 91g. NOTE If your drive is new, please do Hard Disk Initialization, Partition and Format to make it read and write data. For specific steps, please see description..

10Gbps High SpeedThis NVMe enclosure adopts USB3.2 GEN2 Type-C interface, NVMe SSD can support up to 10Gbps transfer rate, SATA SSD supports up to 5Gbps transfer rate The M.2 enclosure built in RTL9210B main control chip, support UASP Trim, can reduce CPU load, reduce consumption, greatly improve read and write efficiency.. Excellent Heat Dissipation PerformanceThis NVMe adapter shell is made of aluminum alloy, stylish and texture, abrasion, scratch resistance and durable. Allowing heat to be transmitted to the shell in time, avoiding damage to the hard disk and preventing speed loss.. Easy to InstallRemoveThis SSD enclosure allows you to easily install and remove, no tools and no driver required, plug and play. With a compact and portable design, easy to carry. Blue Indicator shows the data transfer status, easy and clear.. NGFF SATA NVMe PCIe 2-In-1M.2 SSD enclosure is suitable for M.2 NVMe M KeyBM Key and M.2 NGFF SATA BM Key. Support SSD Size 2230224222602280. The maximum capacity of SSD is 4TB.. Wide ApplicationThe M.2 external encolusre Equipped with USB Type-A to Type-C and USB Type-C to Type-C data cables, compatible with Window 7 8 10 11 Mac OS Linux multi-platform operation system. Suitable for connecting PC, smart phone, tablet, smart TV, smart router, PS4 and other devices..

Perfect Solution for Your Desktop - NNMe pcie adapter supports M.2 NVMeSATA SSDOne SATA interface and one PCIE x4 interface. PCIe adapter card allows to add your M.2 NVMeSATA SSD to your desktop, perfect solution for your desktop. Exclusively Designed for Speed - Up to 32Gbps with PCI Express 3.0 x4, 3200MBs read and 1500MBs write. Up to 6Gbps with SATA, 550MBs read and 520MBs write. M.2 pcie adapter Support PCIe x4 x8 x16 slot for Windows 78.110 MacOS. Advanced Heat Dissipation Solution - Double-sided copper hole strip porous heat dissipation structure reduce high heat generated. Making full use of the powerful performance of SSD. Applicable SSD - M.2 nvme card Support M.2 NVME MMB Key or SATA NGFF BBM Key SSD. M.2 M Key NVMe SSD requires with PCIe slot. M.2 SATA NGFF BBM Key SSD requires with a SATA cable included. Applicable to sizes 2230 2242 2260 2280 SSD. What You'll Get - 1x NVMeSATA to PCIe adapter card, 1x Bracket, 1x Screw Kit and 1x User Manual, LED power and data transfer status..

NOTE For M.2 NVMe SSD Only. Does not support M.2 SATA SSD or SATA HOST. Convert your M.2 NVMe SSD into the 2.5 U.2 NVMe form factor with 9.5mm height. 100 tool-less and screw-less M.2 drive installation. Accepts any M.2 PCIe 4.0 3.0 NVMe SSD from 30mm to 80mm in length 2230 2242 2260 2280. Dual-function aluminum heat sink and lid for optimal protection and cooling performance.

UPGRADE TO IMPRESSIVE NVMe SPEED Whether you need a boost for gaming or a seamless workflow for heavy graphics, the 980 is a smart choice for outstanding SSD performance. PACKED WITH SPEED 980 delivers value, without sacrificing sequential read write speeds up to 3,500 3,000 MB s. KEEP MOVING WITH FULL POWER MODE Keep your SSD running at its peak with Full Power Mode, which drives continuous and consistent high performance. BUILT FOR THE LONG RUN With up to 600 TBW and a 5 year limited warranty, the 980's optimized endurance comes with trusted reliability. RELIABLE THERMAL CONTROL 980 uses nickel coating to help manage the controller's heat level and a heat spreader label to deliver effective thermal control of the NAND chip.SMART THERMAL SOLUTION Embedded with Samsung's cutting edge thermal control algorithm, 980 manages heat on its own to deliver durable and reliable performance, while minimizing performance fluctuations during extended usage.SAMSUNG MAGICIAN SOFTWARE Monitor drive health, optimize performance, protect valuable data, and receive important updates with Magician to ensure you're always getting the best performance out of your SSD.