Mini jaw set includes one of each of the following 20mm.78 Mini Jaws JS20N, 70mm2.75 Jaws JS70N, Mini Spigot Jaws 6026, Mini Step Jaws 6025. Add even greater versatility to your Midi, G3, Super Nova2 and Titan chucks. Allows you to fill the gaps left between 50mm2 and 70mm2.75 jaws. Increased gripping ability for smaller turnings.

Pro-Tek 48290 G3 Chuck Kit with 58 Plainbore Insert. Rust resistant nickel plating. Pro-Tek 2 jaws with dovetail and serrated inner face. Now with intuitive clockwise tightening updated chuck key. 6 point star head jaw screws for better holding power and quicker fastening, T-handled 6 point wrench for faster jaw changes.

Pro-Tek 48290 G3 Chuck Kit with 1-14 x 8tpi Insert Adapter. Rust resistant nickel plating. Pro-Tek 2 jaws with dovetail and serrated inner face. Now with intuitive clockwise tightening updated chuck key. 6 point star head jaw screws for better holding power and quicker fastening, T-handled 6 point wrench for faster jaw changes.

Pro-Tek 48290 G3 Chuck Kit with 1 x 8tpi Insert Adapter with set screw for reverse turning. Rust resistant nickel plating. Pro-Tek 2 jaws with dovetail and serrated inner face. Now with intuitive clockwise tightening updated chuck key. 6 point star head jaw screws for better holding power and quicker fastening, T-handled 6 point wrench for faster jaw changes.

Premium nickel plated chuck, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Premium nickel plated chuck, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Premium nickel plated chuck, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Pro-Tek 23108 Supernova 2 Chuck Bundle with 1-14 x 8tpi Insert Adapter. Rust resistant nickel plating on chuck body. Includes Pro-Tek 2 jaws with dovetail and serrated inner face, JS100N 4 Bowl Jaw Set, and JS130N 5 Bowl Jaw Set. Now with intuitive clockwise tightening. 6 point star head jaw screws for better holding power and quicker fastening, T-handled 6 point wrench for faster jaw changes.

The Wood Lathe Chuck body is made of high quality steel with excellent hardness and anti-rust properties, which can withstand high intensity work without damage and have a longer service life.. The self-centering lathe chucks has the function of self centering, which allows you to quickly clamp the workpiece without repeated calibration.. The use of high-precision machining technology ensures the structural stability and machining accuracy of the four-jaw chuck.. The chuck jaws can be mounted inward and outward to accommodate different shapes of materials.. The inner jaws have a clamping range of 0.2-3.9 inches 5-100mm and the outer jaws have a clamping range of 3.8-5.3 inches 98-135mm for a wide range of workpiece sizes..

Products include Included Chuck body, a set of 2 Dovetail Jaw mounted, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 34 x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first to avoid Wrong Chuck Thread to Wood Lathe Spindle This set of Wood Lathe Chuck is for 1'' x 8TPI or 34 x 16TPI Wood Lathe Spindle Thread . Lathe Chuck Capacity Internal jaws tighten around workpieces varying from 1-12 to 3 or 3 Square Block. External jaws spread inside of workpieces with pilot holes ranging from 2 to 3-58. Included screw chuck provides even more options for extra supporting your projects.. Wide Range of Versatility With the help of 2 Dovetail Jaw, this strong wood lathe chuck can hold and grip most kinds of wood projects, from Bowls, Cups to Vases. VINWOX 4 Jaw Chuck for Wood Lathe is a must to enlarge your range on Wood Lathe Tools and Wood Lathe Accessories, ideal for all Mini, Midi and Heavy Duty Wood Lathes up to 14 swing, capable for turning up to 12 bowl.. Wide Adaptability Lathe Chuck Accepts Full Range of VINWOX Chuck Accessories for Best Versatility and Functions, a perfect Wood Lathe Chuck 1x8TPI for lathe such as Jet, Rikon, Delta, PSI, Grizzly, Rocker, etc, also can work with other Wood Lathe Tools to finish different from small to big projects.. Powerful and Positive Grip The Self-Locking system of VINWOX Lathe Chuck delivers great gripping power after tightening. VINWOX offer clients an option at a price that is more affordable than anything of same quality on the market for Wood Lathe Accessories.. Anti-Rust Chuck Body and Long Life VINWOX 4 jaw Chuck made from high grade K1045 steel machined to allow closest tolerances, Sturdy 4 Body with electric Nickle plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.. Worry-Free Service Quick Response All Customers Can Expect Quick Response and Worry Free Service from VINWOX's Professional Service Team and Qualified Engineers.. DOUBLE CHECK ON WOOD LATHE SPINDLE THREAD SIZE Some customers bought our Key Chuck to fit 1-12x8TPI Spindle Tread, 1x12TPI Thread, 1-14x8TPI Thread, M18x2.5, etc, that won't Thread on. If Wood Lathe Spindle Thread is not 1'' x 8TPI or 34 x 16TPI, Please DO NOT PLACE ORDER, Thanks.

Quality Assured Brass locking pneumatic chuck for durability, strength corrosion resistance. Built-in gasket ensures no air leaks while maintaining smooth flow. Good Compatibility The tire lock on air chuck with 14 NPT internal thread is compatible with most tire inflators and compressors. The maximum pressure of the tire chuck is 250 PSI,suitable for heavy vehicles such as trucks, RVs, etc. Locking Clip Function The tire inflator chuck with clamp adapter not only simplifies the inflation process with its straight tip, but also ensures that the chuck fits snugly into the valve during inflation, providing a hands-free inflation experience. Easy to Install and Use Quickly attaching the locking tire inflator chuck is as simple as pressing down on the locking clip, then pushing the air chuck into the stem until it is firmly clamped, and finally releasing the locking clip. Multiple Options We have both open-flow and closed-flow tire air chucks available. Open-flow design allows air to flow even when not engaged with the stem, and closed-flow design allows air to flow when the internal flow valve is open.

Premium nickel plated chuck, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Chuck set includes Chuck body,Dovetail Jaw, Pin Jaw, Step Jaw, Wide Jaw, 5 Flat Jaw, Two Tightening Bars, T-Allen wrench, Worm Screw Chuck, Adapter converts 1'' x 8TPI to 34 x 16TPI, Nylon washers. MAKE SURE check your wood lathe SPINDLE FIT first to avoid Wrong Chuck Thread to Wood Lathe Spindle . Jaws are compatible with the following chucks Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.All listed chucks require M6x12mm jaw fixing screws to be used. The chuck comes with 8pcs M6x12mm jaw fixing screws .. The gear Chuck delivers great gripping power after tightening. With the Safe Lock Woodworm Screw, you can quickly and easily install small bowl blanks without extra steps or tools.A professional grade tool to secure mounting to form the outside of bowls.. Packed in Plastic box for better storage. Two nylon washers provide a small non-stick buffer between contacting metal surfaces without affecting mount accuracy.. Made from high grade steel machined to allow closest tolerances. Surface with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..

High-Precision Design The 3-jaw self-centering design lathe chuck features an inner diameter of 0.63 inches 16 mm and an outer diameter of 3 inches 80 mm. The clamping range of the chuck for workpieces is 0.08-2.48 inches 2-63 mm. It is widely adaptable to various processing requirements and can be regarded as an ideal choice for multi-scenario processing. . Outstanding Quality The 3-jaw self-centering design lathe chuck is meticulously crafted from high-quality steel and undergoes quenching and hardening treatment. This treatment ensures the chuck body and rolling plate deliver exceptional wear endurance and impact tolerance, making it ideal for high-intensity machining applications.. Minimalist Design The 3-jaw lathe chuck adopts a simple and compact design style, combined with practical balancing functions, to ensure stable and reliable handling. Equipped with a dedicated T-shaped wrench, the installation process is simple and easy to understand. Even novice workers can quickly get started and easily achieve efficient works. . Stable Self-Centering System Users do not need complicated calibration during installation. With high-precision clamping control, it ensures that the clamping error of the workpiece is controlled within a small range, always maintaining the ultra-high stability and accuracy of lathe processing. It can easily handle the lathe chuck, making every work perfect. . Wide Compatibility Scenarios The 3-jaw chuck, with its outstanding versatility, is compatible with various machine tools such as ordinary lathes, economical CNC lathes, grinders, milling machines, drilling machines, as well as all kinds of machine tool accessories..

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used. The jaws come with 8pc NCK-JS8-M6 M6x12mm jaw fixing screws.. The deep internal grip is versatile but main benefit of these jaws is to project the work away from the chuck, allowing good tool access to the base of the timber for cleaning and shaping.. These extremely flexible jaws feature internal and external dovetails for bowl work..

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used. The jaws come with 4 pc NCK-JS8-M6 M6x12mm jaw fixing screws for fitting on the chucks SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4..

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used. Precision CNC machined from a special grade of medium-tensile steel, perfectly balanced for excellent concentricity and a super fine, chatter-free finish to the workpiece.. The jaws come with 8pc NCK-JS8-M6 M6x12mm jaw fixing screws..

Turn spindles without removing your chuck from the lathe using this four prong drive centre.. The centre point insert is removable and can be replaced by a threaded pin or a blank 8mm diameter pin used for long hole boring which is also supplied.. You can get three drive centers with different center points.. The drive center is suitable on BMWOOD NCK and CK series Chuck, Compatible with the chucks SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4..

Premium nickel plating, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, offering better holding power and minimizing strip out for longer life.. Jaw fastening wrench upgraded to T-bar handle from hex wrench for reduced stripping and enabling quicker tightening of screws which are easier on hands..

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. All listed chucks require our M6x12mm jaw fixing screws to be used. The jaws come with 8Pc M6x12mm jaw fixing screws. Designed for the re-chucking of bowls and platters to remove chuck marks.. Add decoration or to reshape the bottoms of bowls and platters previously turned.. Suitable for lathes with a minimum 16 swing diameter Made of die cast aluminum with pre-set holes for precise closing, durability, and long life.. Comes with 4 jaw segments, special fasteners, standard rubber bumpers. Also included Cole Jaw Extension Kit, and extend the capacity from 10 to 15.. Easy bolt on installation..

Adapt your insert type chuck to lathe spindle at a very low cost 1-Inch 8TPI. Easy and inexpensive insertadapter system,Simply screws into the back of your chucks.Ensures maximum adaptability and flexibility - Changing your lathe only requires change of insert. Female 1 inch 8 TPI,male 1-12-8 TPI,Make sure the size of your lathe.Partial thread,non-full thread,please confirm before purchase.. Widely Compatible Compatible with Nova lathes original design, Jet Mini lathes, WEN 3421, Rikon 70-150VSR, SuperNova 2 and G-3 lathes.. Important Notes Some chuck bundles have dedicated threads that dont accept adaptersverify chuck specifications first. This adapter has no grub screw for reverse turning,please note it..

Easy Headstock and Tailstock Mounting on 2 Morse Taper Wood Lathe Spindle with Simple Tap of a Rubber Mallet, Easily Tighten and Open the Drill Chuck Jaws with the Provided Key, A Great Addition to Your Wood Lathe. Accurately, Securely and Smoothly Holds Different Kinds of Drill Bits, Pen Mandrel Shafts and Workpieces up to 58 Diameter, Perfect for Pen Blank Drilling, Trimming and Boring, also Including Drill Press Drilling. Include 2 Morse Taper Arbor, 2 Morse Taper Shank Compatible with most porpular Wood Lathe on Market JT3 fits Most Standard Heavy Duty Industrial Jacbos Drill Chuck for Convinient Interchanging. The other end of Arbor is with JT3 Taper for Drill Chuck with Maximum Holding Power. Fits Popular Wood Lathe 2MT Spindle Including Robert Sorby Wood lathe, Rikon Wood Lathe, Penn State Wood Lathe, Jet Wood Lathe, Delta Wood Lathe, Grizzly Wood Lathe and Tekna Tool Wood Lathe. Drill Chuck is made of Alloy Steel, Corrosion Resistance and Antirust, USA Traditional Design and Construction, Super Strong and Heavy for Stable Service and Long Life. Affordable price. Cautions This Heavy Duty Chuck with 2MT Arbor is not for Power Tools such as Electric Drill or Cordless Drill, ONLY for Wood Lathes with 2MT Spindle and Drill Presses with 2MT Spindle. Please Check Carefully Before Placing an Order.

3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws. Diameter 380mm. Max. Imput Torque 40Nm. Max. Speed 4000rmin. Durable and sturdy, with a long service life..

The 4-inch self-centering chuck kit includes four interchangeable jaws Flat, Round, Big Round, Step, sliding T-handle chuck wrench, T-handle hex wrench, pre-installed and spare screws, safety pin, woodworm screw, 1 x 8 TPI threaded insert, 34 x 16 TPI adapter, and portable black tool case for convenient storage and transport. The chuck automatically centers the workpiece when the jaws are tightened, ensuring symmetric alignment with the lathe's axis. This process maintains accuracy and prevents wobble during turning, making setup and securing the workpiece easier without manual adjustments. The chuck body is made from hardened steel, with the jaws undergoing a hardening and tempering process. The surface is then electroplated with a corrosion-resistant, wear-resistant coating to ensure smooth operation and a prolonged service life. Ideal for beginners and home woodworkers, it comes equipped with multiple jaws and threaded adapters to fit various workpiece sizes, especially for turning bowl-shaped and spindle-shaped objects. Tested and Trusted - Buy with confidence We strive to improve efficiency, reduce costs, and save time, so you can focus on what matters most. Find your parts here.

Integrated Design for Precision - Maximizes rigidity and accuracy with an integral MT3 shank, eliminating chuck slippage and enhancing stability. Keyless Self-Tightening - Features a convenient keyless, self-tightening design for quick and effortless tool changes without a chuck key. Wide Clamping Capacity - Offers a versatile 0 to 12 inch clamping capacity, accommodating a broad range of drill bits and tooling. Superior Runout Accuracy - Ensures high precision with a maximum Total Indicator Runout T.I.R. that does not exceed 0.002 inches. Compact Efficient - The integral shank design is more compact than traditional chucks and arbors, optimizing workspace and setup time.

MINIMIZE STRIPPING Fasten jaws with the included t-bar handle in order to quickly tighten screws and minimize stripping. NICKEL CONSTRUCTION Premium nickel plating and construction conveniently reduces rust and maintenance. IDEAL FIT Fits full range of NOVA Chuck lathes with up to a 16-inch swing. PRECISE ALIGNMENT Laser-etched jaw provides precision when adjusting your slide alignment and positioning. ALL-INCLUDED 12-piece woodturning chuck set includes 2-inch jaw, 8 6-point star fasteners, t-bar handle wrench, woodworn screw, and a microfiber workshop towel Dimensions L x W x H 4 x 4 x 3 inches.

Premium nickel plating, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Compatible with lathe that use 1'' X 8 TPI thread, and 34 X 16 TPI using the adapter. Our wood lathe chuck set is nickel-plated. Each part will not rust. This is its advantage over rusty chuck and can be used for a long time. All most parts are processed by CNC and can be used stably. The lathe chuck jaws can be clamped and expanded, and are widely used.If you need more jaws.Please visit the DEEFIINE store,many products for you to choose. Include chuck body, round Jaw, tightening gear key, T-Allen wrench, wood Screw 38 , adapter converts 1'' X 8 TPI to 34 X 16 TPI.

Compatible with lathe that use 1-14X8 TPI and 1X8 TPI thread. This set contain 4 frequently used types of jaws and 1 large plate jaw so they can handle most shape and sized blocks. This is nickel-plated scroll chuck set for wood lathe. Each part will not rust. This is its advantage over rusty chuck and can be used for a long time. The gear chuck has five jaws and two wooden screws. Each jaw has different uses. This is a complete set of chuck, which can complete most of the work. Owning this set of chuck will not worry about the lack of jaws. All parts are processed by CNC and can be used stably. Considerate black tool box for you to store these tools. And it's easy to carry.

Insert version - required Nova Insert adapter sold separately Body threaded M38.. Includes Pro-Tek 2 jaws with dovetail and serrated inner face, JS100N 4 Bowl Jaw Set, and JS130N 5 Bowl Jaw Set. 6 point star head jaw screws for better holding power and quicker fastening, T-handled 6 point wrench for faster jaw changes.

8 Cole Jaws withaccessory buffer kit. Accessory buffer kit includes 8 long pin buffers and 8 Multisided steel reinforced Buffers. Extra buffer kits facilitate better holding power on various shaped bowl rims. Fits Original Nova, Supernova, G3, Titan, and Midi chucks.. Capacities External Grip on bowl approx. 6.69. Internal grip up to approx. 8.5.

3 most popular small accessory jaws in one handy pack. Fits on any NOVA Chuck. Special NOVA wood turning dovetail profile. Quick mounting. Precisely machined.

Designed for expanded dovetail, reverse dovetail for gripping footed bowls. One of the most popular accessories for mounting 12-14-Inch bowls. Same jaw fixing system across all NOVA Chuck models - total system interchangeability. All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes. 2-Year Warranty.

Premium nickel plated chuck, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Premium nickel plated chuck, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Compatible with lathe that use 1'' X 8 TPI thread, and 34 X 16 TPI using the adapter. Each part will not rust. This is its advantage over rusty chuck and can be used for a long time. All most parts are processed by CNC and can be used stably. The lathe chuck jaws can be clamped and expanded, and are widely used.If you need more jaws.Please visit the SIIIXS store,many products for you to choose. Include chuck body, round Jaw, tightening gear key, T-Allen wrench, wood Screw 38 , adapter converts 1'' X 8 TPI to 34 X 16 TPI.

Multi-tooth, spring-loaded drive centers are far superior to traditional 4-prong centers that come stock with most lathes. The spring-loaded center point contacts the workpiece first, then retracts into the center when pressure is applied preventing splitting of your workpiece. The multiple teeth then grip the wood as pressure is applied on the tailstock greatly decreased the likelihood of splitting your work. 1 diameter head. 1-34 long. Hardened steel. Designed to fit in most 4 jaw chucks eliminating the need to remove the chuck every time you need of use this center.

Premium nickel plating, minimizes rust and maintenance and is ideal for turning green wood.. Stronger and more versatile 50mm2 PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.. Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.. Upgraded 6 point star fasteners exerting more torque with ease, for holding power and minimizing strip out. Includes 6 point T bar wrench. Intuitive Clockwise Jaw Closing Action Righty Tighty, Lefty Loosey..

Auto-Stop Jaw Slides inhibit the widening of the chuck jaws beyond their optimum clamping range insuring the material is properly secured. Anti-Release Spindle Lock is an exclusive DELTA feature that ensures the chuck will stay securely mounted on the lathe during forward and reverse turning applications. Enhanced jaw gearing provides extra smooth jaw movement and increased clamping pressure for maximum material support. Threaded chuck jaws increase surface contact with the material offering more secure clamping.

High powered Tuff Lock gearing delivers outstanding grip for little effort. Fast comfortable Adjustable T Bar handle. Open back for easy cleaning. Fits full range of NOVA Chuck Accessories. Insert required for use Separate purchase.

INCLUDES chuck body, 50mm jaws, T-handled chuck key, manual and fasteners. CHUCK BODY IS APPROXIMATELY 3-38 diameter, depth is 1-34 and weight is only 3 lbs. Direct Thread 1 x 8 TPI. HANDLES UP TO 14-diameter bowls and turnings with up to a 6-long spigot when using the standard 50mm jaws. DESIGNED FOR mini, midi and smaller lathes with up to a 14- diameter swing.

New G3 chuck body, now with right hand tightening action. Kit includes 2 jaw set JS50N, Pen Jaw set 6034, mandrel saver, and woodworm screw. New chuck key with sliding T-bar handle to clear larger projects. Interchangable with other Nova jaws and chucks. Includes BM storage case.

New G3 chuck body, now with right hand tightening action. Kit includes 2 jaw set JS50N, 10 Cole Jaw set JSCOLE with 6030 bumper kit, and woodworm screw. New chuck key with sliding T-bar handle to clear larger projects. Interchangable with other Nova jaws and chucks. Includes BM storage case.

Fits all Nova G3 Chucks. New style - sliding T-bar handle clears large products and assists with greater leverage.