COMPATIBILITY 6 fins blender blades replacement fit for Ninja 900 Watt 1000W models, 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480, BL480D, BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70 and more. NOTE Please confirm if your blender match the models mentioned above before purchasing. 4 INCHES DIAMETER The 6 Fins Blender Blades fits for 18oz, 24oz, 32oz Cups, NOT FIT FOR 16oz The diameter of the Blender Blades is approximately equal to 4 inches10cm, NOT 3.35 inches8.5cm, PLEASE check which one you need before ordering. PACKAGE INCLUDES 6 Fins replacement blade assembly includes a rubber gasket, one hook. The gasket prevents leaks. Hook makes it easy to remove the gasket. PREMIUM QUALITY Blender blade for ninja is made of food grade ABS plastic and High-strength stainless steel blade. No metallic taste, non-oxidation, fastness and reusable. WARM TIPS The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.

PACKAGE INCLUDED- ONLY NINJA 6-BLADE REPLACEMENT IS IN THE PACKAGE. Please note that the pitcher is NOT included. The 72 oz pitcher shown in the picture is only for your reference.. COMPATIBILITY- This replacement ninja blade is ONLY compatible with 6-blade Ninja blender 72 Ounce Pitcher 1100w 1200w 1500w, including BL550 BL500C BL500, BL610, BL642, BL660, BL660C, BL700WM, BL700RC, BL700C, BL700, BL740, BL770, BL771, BL780, BL780CO, NC600CCO, NJ600, NJ602, NJ600C, NJ600RC, NJ602CO, NJ602NQ, NJ602Q, NJ602W and more. Please refer to image No.2 to check your original blade's base shapesize before placing ordering.. SAFEQUALITY MATERIAL- The ninja 6 blade replacement is made of food-grade stainless steel with corrosion resistance and free BPA which is quite safe. The blades excellent sharpness and 6-blade design can blend your food well without leaving bits and pieces of unblended bits. The great hardness also make it not easy to be damaged.. SAVING MONEY- Our 6-blade replacement can replace your Ninja blenders original dull or damaged blades to save you amount of money without buying another expensive new blender. Your nin-ja blender will make a big difference with this non-original 6-blade as its performance is as good as the original.. EASY INSTALLAITONWASH- This ninja blender parts blade is already assembled, you just need to install it to your ninja blender which is very easy. For washing, you can put it in the dishwasher to free your hands or brush it by holding the head..

Product Specifications The product is a 7 fins ninja blender blade replacement with a diameter of 10cm. The thickness of the ninja replacement blades reaches 0.09inch at most. It is made of BPA-free plastic and food-grade high-strength stainless steel. It is easy to install and clean, and the original parts match well.. Compatible models Be sure to check the number of Fins on your blender as the same model may use a different number of Fins ninja blender replacement parts Compatible with Nutri Ninja Auto-iQ Pro, BL487-30, BL488W-30, BL487A-30, BL486CO-30, BL480D Nutri Ninja Auto-iQ Compact System BL491-30, BL492-30, BL492W-30, Nutri Ninja Auto-iQ BL2012, BL2013, BL450-30, BL451-30, BL454-30, BL455-30, BL456-30, BL480, BL480D, BL481, BL481-30, BL482-30, BL486CO, BL486CO-30, BL487, BL487-30, BL488W, BL488W-30, BL490, BL490-30, BL491, BL491-30. Compatible models Be sure to check the number of Fins on your blender ninja blender cups replacement Compatible with Nutri Ninja Auto-iQ BL492, BL492-30, BL492W, BL492W-30, BL640, BL640-30, BL641, BL641-30, BL642, BL642-30, BL642W, BL642W1-30, BL642Z, BL680A, BL680A-30, BL681A, BL681A-30, BL681C, BL682, BL682-30, BL682QRT-30, BL682QT-30, BL685-30, BL687CO-30, BN751, BN800, BN801, CT641-30, CT680CO2SS, CT680CO2SS-30, CT680SS, NN100, NN100-30, NN100A, NN101, NN101-30, NN102,. Wide Application The replacement extractor blade is perfect for making smoothies and frozen drinks, the ultra-sharp and sturdy blade can quickly blend your favorite food and drinks, and the use of high-quality ABS material ensures that there will be no leakage.. You Can Get 1 7 Fins replacement blade assembly With one rubber gasket on, 24-hour quick customer service, 30 days worry-free refund, 18 month worry free warranty. If there is any problem with the product, please feel free to contact us.. NOTE Please note that there is one or two rubber rings in the knife holder. If there are two, please remove one..

Perfect Replacement This ninja 4 blades replacement is compatible with Ninja NJ100 NJ100GR NJ100WM. High-quality stainless steel This blade is made of premium, durable stainless steel that is rust-resistant and has a bright finish. It is sharper and stronger than other blades, making it easier to stir food and ensuring thorough mixing.. Rust-resistant and durable Made of food-grade stainless steel, it can be easily cleaned even with frequent contact with meat juices and daily rinsing, effectively preventing rust and maintaining cleanliness and hygiene even with long-term use. Easy Installation and Cleaning Ninja blender blades can be easily installed in seconds, without complicated assembly steps. The blade surface has a scratch-resistant coating that is smooth and delicate, preventing food residue from accumulating. Sharp Blades Effectively removes ice, resulting in a smooth texture. Easily chop, mince, and blend ingredients, perfect for making soups, sauces, gravy, toppings, dips, and more. This replacement blade is ideal for blending. Package includes 1 replacement bladeWe guarantee these Ninja compatible blades perform just as well as the original Because the blades are very sharp, keep out of reach of infants and young children, and exercise caution during installation or cleaning.

for Ninja blender replacement blade is made of durable stainless steel and non BPA food grade plastic, which matches well with original parts. blender replacement parts easy to install and clean, and can also be washed in a dishwasher. Replacement parts compatible Ninja blender BL450_30, BL451_30, BL454QAQ, BL454QBL, BL454QVO, BL454QY, BL456, BL456BRN, BL480_30, BL480D, BL487QH, BL487QPL, BL490_30, BL491_30, BL681C, BL682, BN401, BN401C, BN750, BN750C, BN751, etc. 7 fins replacement blender blade diameter 3.9in, only fit for 182432OZ cups with a diameter of 3.9in, not only fit for 16OZ cups with a diameter of 3.15in. PACKING 1x 7 Fins replacement blade assembly With one rubber gasket on. Before purchasing, please ensure that your Ninja blender is 7 fins and the blender blade is 3.9in. You can also compare the models in the picture to ensure compatibility with your Ninja blender.

Check Before OrderingThis 7 fins extractor blade assembly is designed for 7-fin blade bases only. Please confirm your original blade has 7 fins and about 4 in 10 cm diameter before purchase. Fits 18 oz, 24 oz and 32 oz cups not compatible with 5-fin, 6-fin or 16 oz cups.. Compatible Blender ModelsCompatible with select Ninja blender models including BN400, BN401, BN750, BN751, BN800, BN801, BL450-30, BL480-30, BL482-30, BL492-30, BL642-30, BL680-30, BL682-30, BL687CO-30, NN100, NN101, NN102, BL2012, BL2013 and more. Please compare your model and blade shape before ordering.. Stainless Steel Blade DesignThe blender blade replacement features sharp stainless steel blades and a sturdy base, helping blend smoothies, frozen fruit, protein shakes, vegetables, nuts and ice. A practical replacement part to help restore your blenders cutting and blending performance.. Leak-Resistant GasketThe 7 fins blade assembly comes with a pre-installed rubber gasket to help reduce leaking during blending. An extra gasket is included for future replacement. If leaking occurs, please check whether the bottom gear, gasket and cup are tightened securely.. Easy Installation CleaningDirect replacement design makes installation simple remove the old blade assembly and twist the new blade onto the compatible cup. The included hook helps remove the gasket, and the cleaning brush helps clean food residue from blade gaps while keeping your hands safer..

AttentionThis is 3.35inch 6-fin male blade.Only fit Ninja blender BL660, BL660C, BL663, BL663CO, BL740, BL740C,BL770, BL770A, BL770BRN, BL770W, BL771, BL771C, BL772, BL772QBK, BL772QCN, BL772QPL, BL772QT, BL772QWH, BL773CCO, BL773CO, BL780, BL780C, BL780CCO, BL780CO, BL780WM.If you are not sure about the model of the blade your machine needs, please let us know and we will promptly check it for you.. Not forCannot replace these blades of approximately the same size.Ninja blender QB3000,QB3000SSW 30, QB3000QR 30, QB3001SS 30, QB3000QBK , B3004, QB3005,BN300, BN301, BN302,BN305, BL200 30, BL201 30,BL201C 30,BL203QBK 30 ,BL203OCN 30,BL203QB 30,BL203QY 30,BL204 30,BL206QGN 30,BL206QWH 30,BL206QY 30, BL206QBK 30,BL206QBL 30, BL207QBK 30,BL207QMBL 30,BL208, BL209, BL250,BL710,BL810,BL820,BL830,BN642, BN642BRN, CT661V, CT671AV, CT672V etc.. Not forNot suitable for all other sizes of blades such as 4inch blade or 18oz 20oz 24oz 32oz cups. Not for other brand blenders .. UpgradeBPA free and Dishwasher safe.This latest replacement blade for ninja blender comes with new blade on the top. This blade is proven to have better balance and greater applicability.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

COMPATIBILITY Designed as a perfect Ninja blender blade replacement, fits Ninja Blender 72 Ounce Pitcher 1100w 1200w 1500w, including BL550 BL500C BL500, BL610, BL642, BL660, BL660C, BL700WM, BL700RC, BL700C, BL700, BL740, BL770, BL771, BL780, BL780CO, NC600CCO, NJ600, NJ602, NJ600C, NJ600RC, NJ602CO, NJ602NQ, NJ602Q, NJ602W and more. MATERIAL The 6-blade replacement is made of food-grade stainless steel and free BPA. Dishwasher safe, easy to clean. INSTALLATION Easily replaces your worn or damaged blade - fits securely into the original Ninja blender base. DESIGN Features a 6 fin blade system that delivers consistent and efficient chopping results. CUSTOMER SERVICE Any question, please send us message, we will reply to you soon.

Only For - This replacement Blade Only compatible with Ninja Foodi Power Blender CO101B, CO351B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT,CO401B, SS400, SS400C, SS401, SS401C. Please check your Ninja Blender model.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

COMPATIBILITY Our 7 fins ninja replacement blades apply to BL450-30, BL455-30, BL480D, BL481-30, BL482-30, BL486CO, BL487, BL487-30, BL487A, BL487A-30, BL487T, BL487T-30, BL488W, BL490, BL491, BL492, BL492W, BL492IS-30, BL640, BL640-30, BL641, BL641-30, BL642, BL642-30, BL642W1-30, BL680A, BL680A-30, BL682, BL682-30,BL682QRT-30, BL685-30, BL2012, BL2013, CT641-30, CT680SS, CT680CO2SS, CT680CO2SS-30, BL687CO-30, NN100, NN100A, NN100-30, NN101, NN101-30, NN102Only fit for 18oz, 24oz, 32oz cups not fit for 16oz. Not fit for BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, BL820, BL830, BL450, BL451-70, BL454-70, BL482-70, BL480, BL480D-30. Please confrim your ninja blender model number before order this ninja blender lid replacement.. Ninja blender blade replacement in market are easy to crack and leak after several times use, we released this new version to overcome those issues for customers after a long period of research and testing in the design and production process. For this new version 7 fins ninja blender replacement parts, we updated the carbon steel bearing to 404 stainless steel high speed bearing,it greatly enhances the strength of the product.. As you can see from the picture, our latest ninja blender blade comes with new blade on the top. This blade is proven to have better balance and greater applicability.BPA free and Dishwasher safe.. Note1please make sure you close the bottom blade tight enough on the cup before using this ninja accessories. Note 2 The rubber gasket in the bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it..

Please Check Before order,please check your existing blade for the following.Count the FINS IT SHOULD BE 7-FINS, 4 inch 10cm Diameter. Compatible ModelThe 7-fins blender blade is compatible for ninja blender BN400,BN401,BN750,BN751,BN800,BN801,BN801C,BL450_30,BL480_30,BL482_30,BL492_30,BL493,BL494,BL640_30,BL641_30,BL642_30,BL680_30,BL682_30,NN100,NN101,NN102,NN210 .etc. Premium MaterialsMade of food-grade high-strength stainless steel for superior corrosion resistance. Even with prolonged exposure to acidic juices and dairy products, it remains rust-free. The six-blade design crushes ice without dulling and easily handles frozen fruits, nuts, and other tough ingredients. Easy to CleanOur replacement blades are easy to clean and dishwasher safe, maintaining their durability and preserving the taste and flavor of your ingredients. Keep your blades clean for optimum performance and hygiene. Leakproof Seal RingExperience hassle-free blending with our replacement blades that come with superior sealing rings. These rings prevent any leaks, keeping your blends contained without any mess, so you can enjoy a clean and convenient blending process. Note1. Please read the pictures, bullet points, product description carefully before purchasing to ensure compatibility. 2. Only fit for 7 fins blade base not 5 fins or 6 fins. 3. Only fit for 18oz 24oz 32oz cups, not fit for 16oz cups.4.Not original Ninja product. Packing Includes1 7 fins replacement blade assembly there is already a gasket inside the blade, 1 hook, 1 cleaning brush,1 extra rubber gasket.

PlaceholderTotal Crushing Blades Part 316KKU770. Compatible with Ninja Blender BL640, BL641, BL642, BL642W, BL642W1, BL642Z, BL680, BL680A, BL681C, BL682, BL682W, BL685, BL687CO, BL688, BL689C, BL770, BL770ABL770W,BL771,BL771C,BL772,BL772Q,BL773CCO,BL773CO,BL773REF,BL780,BL780C,BL780CC0,BL780CO,BL910,BN700BN701,BN750,BN750C,BN751,BN751C,BN800,BN800C,BN801,BN801C,DB751A. Compatible with Ninja Blender NC600CCO, NJ600, NJ602, NJ600C, NJ600RC, NJ602CO, NJ602NQ, NJ602Q, NJ602NW,. Made of high quality food grade materials and stainless steel, BPA free , Dishwasher safe. Package include 1 pcs 6 Blade Replacement.

Pro Extractor Blades Assembly - 764KKU300. Compatible with ninja blenders BN300, BN300C, BN301, BN302QAQ, BN302QCN, BN302QCP, BN302QNV, BN302QRD,BN302QS. Made of food grade PP and stainless steel. Package include 1 blade.

No More Cracks and Rust Replacement blades in market are easy to crack and leak after several times use, we released this new version to overcome those issues for customers after a long period of research and testing in the design and production process. For this new version 7 fins blade compatible for ninja blender, we updated the carbon steel bearing to 420 stainless steel high speed bearing, which greatly enhances the durability of our blender blade and eliminates rusting. Updated Blades Our newest 7-fins blender blades come with a new blade on top. These blades are proven to have better balance and greater applicability. BPA free and dishwasher safe. Compatibility with This 7 fins replacement blade is suitable for Ninja Foodi Power Blender CO101B, CO351B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT, CO401B, SS400, SS400C, SS401, SS401C. Please check your blender model. Not Suitable for Not for 16OZ cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, Bl810, BL820, BL830. NOT for 6 fins blender, NOT for blender come with female blade. Worry-Free Shopping Product quality and customer satisfaction is our top priority. If this blender blade replacement fails to meet your expectations. Please contact with us through Amazon and you we will do our best to solve any problems and let you have a pleasant shopping experience..

Morning Smoothie Ready This blender blade replacement restores peak power for green smoothies, protein shakes post-workout drinks crushes frozen banana, kale ice into silky textures every time. Frozen Cocktail Ice Crushing Power These replacement parts for the Ninja Blender crush ice for margaritas, daiquiris snowcone drinks precision-machined 7 Fin Male 3.9 blade, no strain on your motor. Compatible with Multiple Ninja Models These blender replacement parts are suitable for CO101B, CO351B, CO150B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT. Versatile Multi-Use Design These blender parts replacement handles almond butter, nut milks thick smoothie bowls daily durable construction keeps blades sharp through months of daily blending. Easy to Clean Maintain These blender accessories let you enjoy your blends with less cleanup simply rinse the blade quickly and get back to blending in no time. Lifetime Warranty Backed by a limited lifetime warranty with responsive customer support for any compatibility or performance issues.

Upgraded 7-Fin Blades Includes a new top blade for better balance and vortex technology. Proven to crush ice, blend frozen fruits, and make smoother smoothies faster and more consistently than standard blades.. Wide Compatibility This replacement blade assembly is designed for Ninja Blenders Auto iQ models including BL480-30, BL482-30, BL490-30, BL640-30, BL642-30, BL682-30, BN401, BN751, BN801, BL2012, NN102 and more Please check your blender model.. Complete Replacement Kit Includes everything you need 2 x 7-Fin Bottom Blade Parts, 2 x Extra Replacement Gasket Rings, 1 x Gasket Replacement Tool for easy installation, and 1 x Cleaning Brush for maintenance.. Easy Installation Maintenance Tool-free replacementsimply unscrew your old blade and snap this one into place. Dishwasher-safe for quick cleanup, or hand-wash for added convenience.. Versatile Kitchen Performance Perfect for a wide range of tasksfrom chopping vegetables and grating cheese to blending the creamiest smoothies, shakes, and frozen drinks. Ensures leak-free operation for mess-free preparation..

Precision Engineered 7 Fin Design Our Ninja blender replacement blades feature an optimized 7-fin design that delivers superior blending performance, ensuring smooth and consistent results every time you blend.. This Ninja Blender Replacement Blade is Compatible with Models Including BL450_30, BL451_30, BL454QAQ, BL454QBL, BL454QVO, BL454QY, BL456, BL456BRN, BL480_30, BL480D, BL487QH, BL487QPL, BL490_30, BL491_30, BL681C, BL682, BN401, BN401C, BN750, BN750C, BN751, and more. Not compatible with 16 oz cups, or models such as BL660, BL770, BL780. Please verify your blender model before purchase.. Durable Stainless Steel Construction Crafted from high-quality stainless steel, these Ninja blades replacement are built to last, resisting wear and tear while maintaining sharpness for long-term use.. Effortless Food Processing The advanced blade assembly ensures efficient chopping, blending, and pureeing, making it ideal for everything from smoothies to soups and frozen treats.. Restore Your Blender's Performance Replace your worn-out Ninja blender parts with our high-performance blades to bring back the original power and efficiency of your Ninja blender..

Important Compatibility CheckThis 7 fins extractor blade assembly is designed for blender cups that use a 7-fin blade base with about 4 in 10 cm diameter. Fits compatible 18 oz, 24 oz and 32 oz cups. Not compatible with 5-fin, 6-fin blade bases or 16 oz cups. Please check your original blade before ordering.. Compatible Blender ModelsCompatible with select Ninja blender models including BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642-30, BL680A, BL682, BL682-30, BL687CO-30, NN100, NN101, NN102 and more.. Stainless Steel Blade DesignThe 7 fins blender blade replacement features sharp stainless steel blades and a sturdy base to help restore blending performance. Great for smoothies, frozen drinks, fruits, vegetables, protein shakes, nuts and ice, making daily blending more convenient.. Leak-Resistant Gasket DesignEach extractor blade assembly comes with a pre-installed rubber gasket to help reduce leaking during blending. Extra rubber gaskets are included for replacement. Before use, make sure the gasket is seated properly and the blade assembly is tightened securely onto the cup.. Complete Replacement SetPackage includes 2 x 7 fins extractor blade assemblies, 2 x extra rubber gaskets, 2 x cleaning brushes and 2 x cleaning tools. The extra gaskets help reduce leaking, while the brushes and tools help clean food residue from blade gaps and narrow areas after blending..

Compatible With Ninja Extractor Blade AssemblyFor Ninja blender blade 6 fin is compatible with Nutri Ninja BL660 BL663 BL663CO BL665Q BL770W BL770A BL770 BL771 BL771C BL772 BL772Q BL773CO BL773CCO BL740 BL770 BL770A BL780 BL780CO. Also Fit for Nutri Ninjia Extractor Blade Assembly Model 303KKU, 307KKU, 356KKU800, 322KKU770. Premium QualityThe 6 Fins blade for ninja bullet is made of food-grade high quality stainless steel, anti-corrosive and dishwasher safe. Meets or exceeds OEM standards, 100 tested before shipping. Prefect for nutritious shakes, smoothies and frozen drinks. NoteReplacement For ninja single serve blender blade only fits for single serve 16 oz cups, 6 Fins, Diameter 3.35 inches8.5cm. Not fit 18oz, 24oz, 32oz. Extra GiftThe extra gasket has been installed in the bl770 blade, you can use the blade without any other operation. Please check rubber gasket before use and make sure it is put tight into the replacement bottom blade. Package Include1 x 6-Fins for Ninja blender blade replacement, 1 x gasket rubbers replacement The rubber gasket had been put into the 6-fins bottom blade assembly. Please make sure your blender base has 6 fins.

Universal Compatibility for Seamless Blending Elevate your blending experience with our Ninja Blender Blade Replacement, meticulously designed for the 72 oz pitcher. It's universally compatible with a variety of models including BL640, BL642, BL680, BL770, BL910, BN701, BN751, BN801, and more. Check our Compatibility Chart for a detailed list of models.. Unparalleled Safety Superior Quality Crafted with culinary precision, our Ninja Blades Replacement features a durable 6-blade design, each blade meticulously made from food-grade stainless steel, ensuring they are BPA-free and corrosion-resistant. The blade assembly is thoughtfully engineered, with each of the six blades securely attached to a base crafted from enhanced nylon.. Optimal Replacement for Peak Performance Revitalize your Ninja blender with our top-quality Ninja Blender Blade. Over time, blades can wear and become dull. By replacing with our blade, youll rejuvenate your blender, bringing it back to its original glory and efficiency. This upgrade not only enhances your blending experience but also reduces the need for frequent replacements due to its high hardness and durability.. Effortless Installation Cleaning Our blades are pre-assembled for hassle-free installation. Designed with precision, the seamless integration of blades and base leaves no nook or cranny for food particles to hide, making it dishwasher-safe and easy to clean. This attention to detail ensures a hygienic and comfortable blending experience every time.. Worry-Free Shopping Experience We stand behind our Ninja Blender Blade Replacement with a 3-year manufacturer's warranty. Should you encounter any issues during your purchase or while using the product, our professional customer service team is always ready to provide fast, hassle-free support..

Compatibility List Our Ninja 5 fins blade has a diameter of 3.35in8.5cm and is compatible with Ninja QB series QB3001SS, QB3000, QB3000SS, QB3004, QB3005, QB3000SSW-30, QB3000QR-30, QB3001SS-30, QB3000QBK, QB3004, QB3005. Note Please carefully confirm your blender model before purchasing. Important ? Please read the pictures, bullet points, A content carefully before purchasing to ensure compatibility. The Ninja blender has 5 fins not 6 or 7 fins. Ninja blender cups is 16oz, not 18oz 24oz 32oz. One Gasket Rubber already in the blade, you just need to install it directly. The gasket included in the package is extra. If water leakage occurs, the biggest reason is that the gear on the back of the blade is loose, just tighten it. Not original Ninja product. Premium Quality Made of high quality BPA-Free high impact plastic and food-grade high-strength stainless steel. It has excellent corrosion resistance, dishwasher safe. We upgraded the carbon steel bearings of this 5 fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength, can prevent cracking, leakage and rusting. Easy installation and cleaning, perfectly match of original parts. Good Usage Great for smoothies and frozen drinks. The replacement blade is good for chopping, grating and blending. Whips up your favorite foods and smoothies in second without any leakage. If the blade replacement leaks, check if the gear fin on the back is loose and tighten it. Gasket Replace Tool Brush After using the blender, you should remove the sealing gasket from the blades and clean it. The gasket replace Tool can easily remove the gasket. The brush can clean food residue from the blade crevices and also protect your hands from cuts from the blades. Whats in the Box1 5 fins replacement blade assembly pre-installed with one rubber gasket, 1 gasket replace tool, 1 cleaning brush,1 extra rubber gasket. Product quality and customer satisfaction is our top priority. These are not Original Nutri Ninja Products. If this replacement blender blade fails to meet your expectations, please contact us we'll solve the issue for you.

Compatible with Ninja BL620C, BL660 Series, BL740, BL740C, BL770 Series, BL780 Series, QB3000 Series.. Incompatibility This 6 fins blade is not compatible with 18oz 24oz and 32oz cups. Please confirm that your original cup is 16oz.. 6-Fins Extractor Blade The diameter of the blade is 3.35inches and the height is 3inches. Please make sure your original one is exactly the same size. The extractor blade is 6 fins blade, it will only compatible with your female blender base. Please make sure it fit your blender.. Used for smoothies and frozen drinks our replacement extractor blade is suitable for, grating chopping and blending. Make your foods and smoothies in second.. Important Notice Please carefully check all product images to confirm compatibility before making your purchase..

PACKAGE INCLUDES1 Extractor 6 Fins Female Blade with Gasket, 2 24-Ounce Tall Cups, 2 Sip Seal Lids.. COMPATIBILITY Compatible with Nutri Ninja Auto iQ BL450-70, BL451-70, BL454-70, BL455-70, BL456-70 BL480-70, BL480D-30 DOB, BL480W-70, BL480D-70, BL481-70, BL482A, BL482-70, BL483-70, BL484-70, BL486CO-70, BL487-70, BL487A-70, BL488W-70 BL490-70, BL491-70, BL492-70, BL492W-70 BL451 30 DOB, BL455 30 DOB, BL456 30 DOB, BL482 30 DOB, BL482 BRN 30 DOB BL480D 69 DOB, BL482 BRN 69 DOB.. GOOD REPLACEMENT The extractor blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here. Please make sure the gear at the bottom is tightened before use.. SUPERIOR QUALITY Well-Designed, made of high quality food grade materials and stainless steel, BPA free Dishwasher safe, rigorously tested, no leaks, durable and longevous.. NOTE We don't claim these are original product..

AttentionThis is 4inch 7fins male blade ,Take out a credit card and compare it with your machine as shown in the figure. If the length of the credit card is almost the same as the diameter of the machine, please buy 3.35inch blade instead of the 4inch blade. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.NOT for Ninja ss series such as ss101,ss351,ss300, ss151 etc.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

Wide Compatibility Compatible with Nutri Ninja 7-fins blender blade replacement using 4 10cm cups, including BN400, BN401, BN750, BN751, BN800, BN801 BL480-30, BL481-30, BL482-30, BL487, BL488W, BL490-30, BL491-30, BL492-30 BL642, BL642W, BL681A, BL682 CT641, NN100, NN101, NN102, BL450-30, BL451-30, and BL456. Incompatible Models Not compatible with blender replacement parts 16oz cups or models BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL820, BL830. Please check your blender model and cup size before purchase. Leakproof Blender Blade Replacement This premium gasket for Ninja blades replacement is made from high-quality rubber, providing a secure, leakproof seal every time. Prevents spills and splashes while blending smoothies, shakes, or sauces, keeping your kitchen clean and mess-free. safe and reliable use with your Perfect for 7-fins Nutri Ninja blender. Premium 7-Fins Stainless Steel Blades Crafted with 7-fins stainless steel, these replacement for Ninja blades deliver powerful, efficient blending. Durable material resists wear and maintains sharpness, ensuring long-lasting performance and consistent crushing of ice, nuts, and fibrous ingredients. Durable Featuring premium bearings, this replacement for Nutri Ninja blade assembly ensures long-lasting durability, smooth and stable rotation, and quieter operation. Built to resist rust and cracking, it delivers reliable performance for smoothies, shakes, and frozen drinks. Package Includes 7-fins replacement blades with pre-installed rubber gasket, extra replacement gasket, gasket removal tool, and cleaning brush. Easy to install and maintain for long-lasting performance. Easy to Install Designed for quick and secure setup with the included gasket removal tool. This replacement for Ninja blade fits compatible cups effortlessly, making installation and removal safe, simple, and hassle-free.

Compatible with Ninja BL910 BL450,Bl451, Bl454,BL455, BL456,Bl480, BL480D, Bl481,BL482,BL483, Bl484,BL486,BL487,BL488,BL490, BL491,BL492,BL640,BL642,BL680, BL682,BL685,BN401,BN750,BN751, BN800, BN801, NN100 NN101,NN102,Foodi ss351, ss401, ss100, ss101,SS151,Auto IQ Series Blenders.. Upgraded Sip Seal Lids. No leak No Trouble. Comes with 2 Upgraded Sip Seal Lids, portable cups no leak that pair well with any busy lifestyle that demands on the go convenience.. Please make sure that the diameter of the blade is 3.9inches and the height is 3.15inches. It contains 7 fins and will only work with 18oz, 24oz and 32oz cups.. Safe Material. Health is our top concern. All Components of this ninja blender parts are BPA free. Made of food grade PP materials,eco-friendly and durable. Dishwasher Safe and Easy to Clean.. Avoid Overfilling. To prevent excessive food overflow during mixing, please do not add more than the MAX LIQUID of Ninja replacement cups. Package include 2 x Cups 24oz and 2 x Upgraded Sip Seal Lids and 1 x 7 Fins Blender Blade and 1 x Rubber Gasket..

Compatible with Ninja BL620C, BL660 Series, BL740, BL740C, BL770 Series, BL780 Series, QB3000 Series.. Incompatibility This 6 fins blade is not compatible with 18oz 24oz and 32oz cups. Please confirm that your original cup is 16oz.. 6-Fins Extractor Blade The diameter of the blade is 3.35inches and the height is 3inches. Please make sure your original one is exactly the same size. The extractor blade is 6 fins blade, it will only compatible with your female blender base. Please make sure it fit your blender.. Used for smoothies and frozen drinks our replacement extractor blade is suitable for, grating chopping and blending. Make your foods and smoothies in second.. Important Notice Please carefully check all product images to confirm compatibility before making your purchase..

Compatibility List Our Ninja 6 female fins blade has a diameter of 3.94in10cm and is compatible with Ninja Auto iQ 900W BL450-70, BL451-70, BL454-70, BL455-70, BL456-70, 1000W BL480-70, BL480D-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70, BL482Q-70. Please carefully confirm your blender model before purchasing to avoid buying the wrong one This blender blade has 6 female fins, not 6 male fins. Important ? Please read the pictures, bullet points, A content carefully before purchasing to ensure compatibility. Ninja blender has 6 female fins not 7 fins or 6 male fins. Ninja blender cups is 18oz 24oz 32oz, not 16oz. One Gasket Rubber already in the blade, you just need to install it directly. The gasket included in the package is extra. If water leakage occurs, the biggest reason is that the gear on the back of the blade is loose, just tighten it. Not original Ninja product. Premium Quality Made of high quality BPA-Free high impact plastic and food-grade high-strength stainless steel. It has excellent corrosion resistance, dishwasher safe. We upgraded the carbon steel bearings of this 6 female fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength, can prevent cracking, leakage and rusting. Easy installation and cleaning, perfectly match of original parts. Good Usage Great for smoothies and frozen drinks. The replacement blade is good for chopping, grating and blending. Whips up your favorite foods and smoothies in second without any leakage. If the blade replacement leaks, check if the gear fin on the back is loose and tighten it. Gasket Replace Tool Brush After using the blender, you should remove the sealing gasket from the blades and clean it. The gasket replace Tool can easily remove the gasket. The brush can clean food residue from the blade crevices and also protect your hands from cuts from the blades. Whats in the Box1 6 female fins replacement blade assembly pre-installed with one rubber gasket, 1 gasket replace tool, 1 cleaning brush,1 extra rubber gasket. Product quality and customer satisfaction is our top priority. These are not Original Nutri Ninja Products. If this replacement blender blade fails to meet your expectations, please contact us we'll solve the issue for you.

For Ninja Blade -- Blade assembly diameter 3.358.5cm. Fit for Ninja Extractor Blade Assembly Model 307KKU Ninja Professional Blender BL660 1100w, BL770 1500w, BL740, BL663, BL663CO 30, BL665Q, BL770W, BL771, BL771C, BL772, BL772Q, BL773, BL773CO, BL780,BL770 30, BL773CO 30, BL771 30,BL780 30, BL780CO 30. Please confirm the Size and Model of your blender base has 6fins before purchase. We don't claim these are original Ninja. It is only used to prove the compatibility of accessories.. Quality Replacement and Dishwasher Safe -- The Extractor Blade is made of food grade high strength stainless steel, safe and Durable. Replace it and continue to blend your way to a healthier lifestyle of nutritious shakes, smoothies, nut butters and anything you want.You can put it in your dishwasher for cleaning when finish blending. Very easy to clean and free of hassle.. Tight Seal O-Ring -- The rubber gasket Seal O-Ring is installed already in this replacement blade, you can use the blade without any other operation. Pls note that the gasket may be loose during transportation. Pls check it before use and make sure it is put tight into the replacement bottom blade.. New For Ninja Blender Replacement -- If your Nutri Ninja blender is leaking or getting noisier when blending, it is time that you need a new replacement for the extractor blade. Really recommend to check the bottom blade regularly and replace it every 6 months for good performance. Wed like to address any issues or concerns you have so please do not hesitate to contact us.. Usage Tip -- Crush through ice and frozen ingredients pls use in 72oz cups. Blend personalized smoothies and juices in the 16oz cups. Our 6fin blade only can fit for 16oz cup. Please classify correctly and use the cup for mixing, otherwise, it may damage the parts. Check the gear of the bottom before use, If it's loosen, please tighten it.We don't claim these are original Nutri Ninja. It is only used to prove the compatibility of accessories..

Compatibility The 7 fins blade size is 3.9 in10 cm Diameter fit for Ninja Auto-iQ NN100, NN100A, NN101, NN102, BL455-30, BL481-30, BL482-30, BL485, BL486CO, BL487, BL487A, BL487T, BL491, BL492, BL492IS-30, BL494, BL640-30, BL641-30, BL642-30, BL680A-30, BL681A, BL681C, BL682-30, BL682QT-30, BL685-30, BL687CO-30, CT680SS, CT680CO2SS, CT641-30. Please measure the diameter of the original blade and check the fins on the rubber shaft of the blade before purchase. Tips for Use It is recommended to use warm water to clean the blade after use, do not soak the blade in water for a long time. Please also note that the pre-installed seals may loosen during transport, so please check them before use to prevent leakage. Updated Version The 7 fins blade assembly is made of food-grade plastic and stainless steel with upgraded stainless steel bearings that are leak-free, rust-free, and BPA-free. Helps you make smoothies, dips, snacks and condiments with ease. We recommend replacing the extractor blade every 6 months to obtain the best performance. Packing Includes 1 x 7 Fins Extractor Blades Assembly,1 x Rubber Gaskets. Please kindly be noted that 1 Rubber Gasket is already pre-installed in the 7 fins replacement blade. 1 x Rubber Gasket is the extra one for your future replacement. Do not install an excess rubber gasket into the blade or it will not seal. Notice If our products fail to meet your expectations, wed like to address any issues or concerns you have. we strive to give our customers as good purchasing experiences as possible as we can. We don't claim these are original Nutri Ninja. It is only used to prove the compatibility of accessories.

Wide Compatibility These blender blades are designed for 72 Oz pitchers and work with Ninja blender models BC701CCO BL610610BRN610C660660A660W660WM661BBYC663663CO665QBK665QCN665QWH710WM710WMC740740C CO610B650B CT610610C611C. Quality Material Made with durable, food-grade stainless steel, this replacement blade for Ninja blender features 6 ultra-sharp blades designed for safe, efficient, and long-lasting performance. High Performance Engineered to crush ice, blend smoothies, and mix ingredients efficiently, these blender parts replacement deliver fast, smooth, and consistent results every time. Easy to Clean These replacement parts for blender are dishwasher safe and easy to rinse, making cleanup simple. Enjoy low-maintenance use with durable, quality replacement blades every day. Replacement Fit Designed like the factory part, this replacement blender blade for the pitcher locks in securely and can be swapped out for damaged, missing, or worn blades without buying a new blender.

CompatibilityThe 5 fins male blade for Ninja is 3.35in8.5cm in diameter. They compatible with Ninja QB series QB3001SS QB3000 QB3000SS QB3004 QB3005 QB3000SSW-30 QB3000QR-30 QB3001SS-30 QB3000QBK QB3004 QB3005. Make sure your blender model is on our compatibility list. Only Fit for Single Serve 16oz CupsThe 5 male fins ninja blender blade Only fits for single serve 16oz cups, not fit for 18oz 24oz 32oz blender cups. Not fit for 7 fins or 6fins ninja blender blade. Please confirm your blender base has 5 male fins before purchasing. Premium MaterialThe 5 male fins extractor blade assembly for Ninja is made of premium BPA-free impact-resistant plastic and food-grade high-strength stainless steel, dishwasher safe. Easy to install and clean, perfect match with the original parts. We upgraded the carbon steel bearings of this 5 fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength. Notes? Please read the pictures, bullet points, A content carefully before purchasing to ensure compatibility. The Ninja blender has 5 male fins not 7 fins or 6 fins. Only fit for 16oz cups, not fit for 18oz 24oz 32oz cups. Before use, make sure the 5 fins blades are firmly screwed onto the blender cup. There is already a gasket inside the blade, and the gasket included in the package is extra. The gasket may come loose during shipping, please make sure it fits snugly before use. Easy to UseGreat for making smoothies and frozen drinks. The 5 fins male blade replacement is perfect for chopping, grating and blending. Quickly blend foods and smoothies without any leaks. If the extractor blade leaks, it is most likely that the gear fins on the back are loose, so just tighten them. Package Include1 5 male fins replacement blades assembly there is already a gasket inside the blade, 3.35 inches8.5 cm in diameter, 1 hook, 1 cleaning brush,1 extra rubber gasket. If you have any questions, please contact us and we will give you a satisfactory solution within 24 hours.

Compatibility List Our Ninja 7 fins blade has a diameter of 3.94in10cm and is compatible with Ninja BL455-30, BL480, BL480D, BL481, BL481-30, BL482-30, BL486CO, BL487, BL487-30, BL487A, BL487A-30, BL487T, BL487T-30, BL488W, BL490, BL491, BL492, BL492W, BL492T-30, BL640, BL640-30, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL680A, BL680A-30, BL682, BL682-30, BL682QRT-30, BL685-30, BL2012, BL2013, BN751, BN801, NN100, NN100A, NN101, NN102, CT641-30, CT680SS, CT680CO2SS, CT680CO2SS-30. Important ? Please read the pictures, bullet points, A content carefully before purchasing to ensure compatibility. Only fit for 7 fins blade base not 5 fins or 6 fins. Your ninja blender cups is 18oz 24oz 32oz, not 16oz. One Gasket Rubber already in the blade, you just need to install it directly. The gasket included in the package is extra. If water leakage occurs, the biggest reason is that the gear on the back of the blade is loose, just tighten it. Not original Ninja product. Premium Quality Made of high quality BPA-Free high impact plastic and food-grade high-strength stainless steel. It has excellent corrosion resistance, dishwasher safe. We upgraded the carbon steel bearings of this 7 fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength, can prevent cracking, leakage and rusting. Easy installation and cleaning, perfectly match of original parts. Good Usage Great for smoothies and frozen drinks. The replacement blade is good for chopping, grating and blending. Whips up your favorite foods and smoothies in second without any leakage. If the blade replacement leaks, check if the gear fin on the back is loose and tighten it. Gasket Replace Tool Brush After using the blender, you should remove the sealing gasket from the blades and clean it. The gasket replace Tool can easily remove the gasket. The brush can clean food residue from the blade crevices and also protect your hands from cuts from the blades. Good Usage Great for smoothies and frozen drinks. The replacement blade is good for chopping, grating and blending. Whips up your favorite foods and smoothies in second without any leakage. If the blade replacement leaks, check if the gear fin on the back is loose and tighten it.

Compatibility List Our Ninja 7 male fins blade has a diameter of 3.94in10cm and is compatible with Ninja Foodi Power Blender CO101B, CO351B, CO401B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT, SS400, SS400C, SS401, SS401C. Note Please carefully confirm your blender model before purchasing. Important ? Please read the pictures, bullet points, A content before purchasing to ensure compatibility. Ninja blender has 7 fins not 5 fins or 6 fins. Ninja blender cups is 18oz 24oz 32oz, not 16oz. One Gasket Rubber already in the blade, you just need to install it directly. The gasket included in the package is extra. If water leakage occurs, the biggest reason is that the gear on the back of the blade is loose, just tighten it. Not original Ninja product. Premium Quality Made of high quality BPA-Free high impact plastic and food-grade high-strength stainless steel. It has excellent corrosion resistance, dishwasher safe. We upgraded the carbon steel bearings of this 7 male fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength, can prevent cracking, leakage and rusting. Easy installation and cleaning, perfectly match of original parts. Good Usage Great for smoothies and frozen drinks. The replacement blade is good for chopping, grating and blending. Whips up your favorite foods and smoothies in second without any leakage. If the blade replacement leaks, check if the gear fin on the back is loose and tighten it. Gasket Replace Tool Brush After using the blender, you should remove the sealing gasket from the blades and clean it. The gasket replace Tool can easily remove the gasket. The brush can clean food residue from the blade crevices and also protect your hands from cuts from the blades. Whats in the Box1 7 male fins replacement blade assembly pre-installed with one rubber gasket, 1 gasket replace tool, 1 cleaning brush,1 extra rubber gasket. Product quality and customer satisfaction is our top priority. These are not Original Nutri Ninja Products. If this replacement blender blade fails to meet your expectations, please contact us we'll solve the issue for you.

CompatibilityThe 6 fins ninja replacement blades are 3.35in8.5cm in diameter. They apply to Ninja BL660 1100W, BL660-30, BL660B-30, BL663, BL663CO, BL663CO-30, BL665Q, BL770 1500w, BL770A, BL770W, BL770AMZ, BL770A-30, BL770-30, BL771, BL771-30, BL771C, BL772, BL772Q, BL772-30, BL773, BL773CO, BL773CO-30, BL740, BL780, BL780-30, BL780CO-30, 303KKU, 307KKU, 356KKU800, 322KKU770. Notice Measure your original blade and check the shaft for an accurate match. Not Compatible withNot fit for Nutri Ninja BL450-30, BL451-30, BL454-30, BL455-30, BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30, BL484-30, QB3000, QB3001, SS101, SS151, SS300, SS351 etc. NOT fit for Ninja 18oz 24oz 32oz blender cups. Premium Material6 fins blades, 3.35 inches8.5 cm in diameter, made of premium BPA-free impact-resistant plastic and food-grade high-strength stainless steel, dishwasher safe. Easy to install and clean, perfect match with the original parts. We upgraded the carbon steel bearings of this 6 fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength. Notes? Please read the pictures, bullet points, A content carefully before purchasing to ensure compatibility. The Ninja blender has 6 male fins not 7 fins or 6 female fins. Only fit for 16oz cups, not fit for 12oz 18oz 24oz 32oz cups. Before use, make sure the 6 fins blades are firmly screwed onto the blender cup. There is already a gasket inside the blade, and the gasket included in the package is extra. The gasket may come loose during shipping, please make sure it fits snugly before use. Easy to UseGreat for making smoothies and frozen drinks. The 6 fins blade replacement is perfect for chopping, grating and blending. Quickly blend foods and smoothies without any leaks. If the extractor blade leaks, it is most likely that the gear fins on the back are loose, so just tighten them. Package Include1 6 fins replacement blades assembly there is already a gasket inside the blade, 3.35 inches8.5 cm in diameter, 1 hook, 1 cleaning brush,1 extra rubber gasket. If you have any questions, please contact us and we will give you a satisfactory solution within 24 hours.

Replace Original Parts Replace old ninja blender parts, this 6 blade Compatible With nin-ja 1100w 1200w 1500w kitchen blender systems, exact match Ni-nja 72 oz pitcher BL500 BL500C BL550 BL610 BL642 BL660 BL660C BL700 BL700C BL700RC BL700WM BL740 BL770 BL771 BL780 BL780CO NC600CCO NJ600 NJ600C NJ600RC NJ602 NJ602CO NJ602NQ NJ602Q NJ602W and more. High Hardness 6 Blades This ninja blender blade replacement is made of high-quality food-grade stainless steel, BPA-free and corrosion resistant. The 6-blade design ensures full mixing and provides a delicate output. The high hardness blade stirs food easily and is not easy to damage. Great value for money Instead of buying a brand new blender just because a ninja replacement blades broke, you can buy a 6-blade accessory for a fraction of the cost and get your machine working again. This is a super affordable accessory that fits most American homes. Easy to Install and Clean The ninja blender blade 6 fin has no complicated structure and installation procedures, you can install it in seconds. The blade surface has an anti-scratch coating, and the smooth surface is not prone to food residues and is easy to clean. Notice The blade is sharp, please pay attention to safety when installing and cleaning. Do not allow small children to touch. If there is any product problem, please contact us in time, we will solve any problem for you.

AttentionThis is 4inch 7fins male blade ,Take out a credit card and compare it with your machine as shown in the figure. If the length of the credit card is almost the same as the diameter of the machine, please buy 3.35inch blade instead of the 4inch blade. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.NOT for Ninja ss series such as ss101,ss351,ss300, ss151 etc.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

Compatibility The 6 fins male blade fits for 18 oz, 24 oz, 32 oz cup. Compatible with Nutri Ninja Blender Auto iQ 900W BL450-70, BL451-70, BL454-70, BL455-70, 1000W BL480-70, BL480W-70, BL481-70, BL483-70,BL484-70. Please confirm if your blender match the models mentioned above before purchasing.. Not Fit For Not compatible with Ninja BL450-30, BL451-30, BL454-30, BL455-30, BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30, BL770, BL771, BL772, BL780, BL660, BL740. Not suitable for 16 oz cups and any 7 fin base blender.. 6 Fins Male Blade The 6 fins extractor blade is made of food-grade stainless steel, 3.910 cm diameter, high hardness brings qualified anti-corrosion performance. Please measure the diameter of the original blade and check the fins on the rubber shaft of the blade has 6 before purchase.. Packing Include 1 x 6 fins Male blade. One Gasket Rubber is pre-installed in the 6 fins bottom blade. You can use it with your blender, very easy and doesn't need other operations. The gasket may be loose during transportation. Pls check before use and make sure it is put right into the replacement bottom blade. Note We don't claim these are original Nutri Ninja. It is only used to prove the compatibility of accessories. We recommend replacing the extractor blade every 6 months to obtain the best performance..

AttentionThis is 4inch 7fins male blade ,Take out a credit card and compare it with your machine as shown in the figure. If the length of the credit card is almost the same as the diameter of the machine, please buy 3.35inch blade instead of the 4inch blade. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.NOT for Ninja ss series such as ss101,ss351,ss300, ss151 etc.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

PACKAGE INCLUDES 1 7-Fins Extractor Blade with Gasket.. COMPATIBILITY Compatible with Nutri Ninja BL450-30, BL451-30, BL454Q, BL456-30 BL480-30, BL480D, BL481-30, BL482-30, BL483-30, BL486CO, BL487, BL487A, BL488W BL490, BL491, BL492, BL492W, BL493, BL494, BL494C BL640, BL641, BL641-30, BL642-30, BL642W, BL642Z BL680, BL680A, BL680A-30, BL682, BL682-30, BL682W CT640C, CT641, CT680, CT680A, CT680SS, CT682SP AMZ012BL, AMZ493BRN, BL910 NN100, NN100A, NN101, NN102, NN210 BN400, BN401, BN750, BN800, BN801 BL2012, BL2013.. GOOD REPLACEMENT The extractor blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here.. SUPERIOR QUALITY Well-Designed, made of high quality food grade materials and stainless steel, BPA free Dishwasher safe, rigorously tested, no leaks, durable and longevous.. NOTE We don't claim these are original product..

AttentionImportantPlease confirm first that your Ninja Blender meets these necessary conditions 1,Please make sure your blender model is on our compatibility list. The model number including the last two digits must be exactly the same 2,Your ninja blender blade is 7 fins bladenot 5 or 6 fins 3,Your ninja blender cups is 18oz,24oz,or 32oz.Not 16oz 4.One Gasket Rubber already in the blade, you just need to install it directly. Compatible with Ninia BN751 BN801 BL455-30 BL480D BL481-30 BL482-30 BL486CO BL487 BL487-30 BL487A BL487A-30 BL487T BL487T-30 BL488W BL490 BL491 BL492 BL492W BL492IS-30 BL640 BL640-30 BL641 BL641-30 BL642 BL642-30 BL642W1-30 BL680A BL680A-30 BL682 BL682-30 BL682QRT-30 BL685-30 BL2012 BL2013 CT641-30 CT680SS CT680CO2SS CT680CO2SS-30 BL687CO-30 NN100 NN100A NN100-30 NN101 NN101-30 NN102 and more. Increased PerformanceFeaturing ultra-sharp and durable blades, with a heavy duty long-lasting construction, this smoothie blender part keeps your personal blender running smoothly, easily crushing through fruits, veggies, protein shakes or smoothies. Premium Quality7 Fins, 4inch10cm diameter, Made of high quality 100 BPA-Free high impact plastic and food-grade high-strength stainless steel, dishwasher safe. Precision long-lasting and work great. Easy installation and cleaning, perfectly match of original parts. The Gasket Replace Tool and Brush After using the blender, you should take out the gasket rubber from the blade then clean it. It is easy to leave food residue inside the blades, it will breed bacteria and affect your health. The gasket rubber replace tool can easy take out the Gasket. The brush can clean the food residue inside the crevices of the blade. It also protects your hands from being scratched by the blade. Packing include 2 x 7 Fins bottom blades assembly with gasket rubber already in the blade, 4 x replacement gasket rubber, 2 x gasket rubber replace tool, 2 x cleaning brush..

Only For Please check your existing blade for the following 1 Count the FINS IT SHOULD BE 7-FINS. 2 3.94 10cm Diameter. This replacement Blade Only compatible with Ninja Foodi Power Blender SS300C, SS351, SS351C, SS351TGT, CO351B, SS100, SS101, SS101C, SS101TGT. Please check your Blender model.. High QualityUnlike similar products on the market, we used premium durable materials ,combining rustproof heavy duty stainless steel with non-BPA food-grade plastic, for enhanced safety.. Updated Blade StyleThis latest replacement blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process. the bottom piece is made from a rigid hard plastic material, BPA free and Dishwasher safe.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.. Package included1x7fin ss series blade, 2 x Extra Replacement Gaskets Rubber are also included and should come in handy in the future..

PACKAGE INCLUDES 1 5-Fins Extractor Blade with Gasket.. COMPATIBILITY Compatible with Nutri Ninja Blender 700W Model QB3000, QB3000SSW, QB3000QR, QB3000QBK, QB3001SS, QB3004, QB3005.. GOOD REPLACEMENT The 5 Fins Extractor blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here.. SUPERIOR QUALITY Well-Designed, made of high quality food grade materials and stainless steel, BPA free Dishwasher safe, rigorously tested, no leaks, durable and longevous.. NOTE We don't claim these are original product..

CompatibilityThe 7 fins ninja replacement blades apply to Nutri Ninja Auto iQ BL455-30, BL480, BL480D, BL481, BL481-30, BL482-30, BL486CO, BL487, BL487-30, BL487A, BL487A-30, BL487T, BL487T-30, BL488W, BL490, BL491, BL492, BL492W, BL492T-30, BL640, BL640-30, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL680A, BL680A-30, BL682, BL682-30, BL682QRT-30, BL685-30, BL2012, BL2013, BN751, BN801, NN100, NN100A, NN101, NN102, CT641-30, CT680SS, CT680CO2SS, CT680CO2SS-30, etc.. Not Compatible withNot fit for Nutri Ninja Auto iQ BL450, BL451-70, BL454-70, BL480, BL480D-30, BL482-70, BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, BL820, BL830. Premium Material7 fins blades, 4 inches10 cm in diameter, made of premium BPA-free impact-resistant plastic and food-grade high-strength stainless steel, dishwasher safe. Easy to install and clean, perfect match with the original parts. We upgraded the carbon steel bearings of this 7 fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength. Notes? Please read the pictures, bullet points, A content carefully before purchasing to ensure compatibility. The Ninja blender has 7 fins not 5 fins or 6 fins. Only fit for 18oz 24oz 32oz cups, not fit for 16oz cups. Before use, make sure the 7 fins blades are firmly screwed onto the blender cup. There is already a gasket inside the blade, and the gasket included in the package is extra. The gasket may come loose during shipping, please make sure it fits snugly before use. Easy to UseGreat for making smoothies and frozen drinks. The 7 fins blade replacement is perfect for chopping, grating and blending. Quickly blend foods and smoothies without any leaks. If the extractor blade leaks, it is most likely that the gear fins on the back are loose, so just tighten them. Package Include1 7 fins replacement blade assembly there is already a gasket inside the blade, 1 hook, 1 cleaning brush,1 extra rubber gasket.

AttentionThis is 3.35inch 6-fin Male blade.Only fit Ninja blender BL660, BL660C, BL663, BL663CO, BL740, BL740C,BL770, BL770A, BL770BRN, BL770W, BL771, BL771C, BL772, BL772QBK, BL772QCN, BL772QPL, BL772QT, BL772QWH, BL773CCO, BL773CO, BL780, BL780C, BL780CCO, BL780CO, BL780WM.If you are not sure about the model of the blade your machine needs, please let us know and we will promptly check it for you.. Not ForNot for Ninja blender QB3000,QB3000SSW 30, QB3000QR 30, QB3001SS 30, QB3000QBK , B3004, QB3005,BN300, BN301, BN302,BN305, BL710,BL810,BL820,BL830,BN642, BN642BRN, CT661V, CT671AV, CT672V etc.. Not ForNot suitable for all other sizes of blades such as 4inch blade or 3.75inch blade or 18oz 20oz 24oz 32oz cups.Not for other brand blender such as NutriBullet or Magic.. UpgradeThis latest replacement blade for ninja blender comes with new blade on the top. This blade is proven to have better balance and greater applicability.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

COMPATIBILITY- This replacement stacked 6-blade is ONLY compatible with Ninja Detect Power Blender 72 oz Pitcher, including TB200, TB200C, TB201, TB201C, TB300, TB300C, TB301, TB301C, TB400, TB400C, TB401, TB401C, TB301UK, TB301UKCP, TB301EU, TB301EUCP, TB200WMVB, TB200WMBM, CO401B, SS400, SS400C, SS401 and SS401C. Please refer to image No.2 to check your blenders model before placing ordering.. SAFEQUALITY MATERIAL- The total crushing 6 blade replacement for Ninja 72oz is made of food-grade stainless steel with corrosion resistance, BPA free, which is quite safe. The blades excellent sharpness and 6-blade design can blend your food well without leaving bits and pieces of unblended bits. The great hardness also make it not easy to be damaged.. SAVING MONEY- Our chopping 6-stacked blade assembly replacement for Ninja blender can replace your original dull or damaged blades to save you amount of money without buying another expensive new blender set. Your ninja blender will make a big difference with this 6-blade as its performance is as good as the original.. EASY INSTALLAITONWASH- This crushing 6 blade replacement part for ninja 72 oz pitcher is already assembled, you just need to install it to the pitcher torque which is very easy. For washing, it is dishwasher safe, or you can hand-wash it with brush. Please be careful when washing as the blades are quite sharp.. ADDITIONS- 1 We DONT CLAIM our replacement stacked 6-blade assembly for ninja is original 2 ONLY one 6-blade is in the package, the pitcher which is for demonstration is NOT included 3 Please check all images CAREFULLY before buying 4 Be careful when using the blade to avoid hurting your hands..

Compatibility Designed as a perfect Ninja blender blade replacement, including BL640, BL641, BL642, BL642W, BL642W1, BL680A, BL681A, BL681C, BL682, BL682W, BL685, BL687CO, BL688, BL770, BL770A, BL770BRN, BL770W, BL771, BL771C, BL772, BL772QBK, BL772QCN, BL772QPL, BL772QT, BL772QWH, BL773CCO, BL773CO, BL780, BL780C, BL780CCO, BL780CO, BL780WM, BL910, BL910BRN, BN700, BN700C, BN701, BN701C, BN750, BN750C, BN751, BN751C, BN800, BN800C, BN801, BN801C, BN801BBYC, BN801NP, BN805A,BN805CCO, DB751A, BL780WM, BR201AMZ and more. Material The 6-blade replacement is made of food-grade stainless steel and free BPA. Dishwasher safe, easy to clean. Easy to install clean The mixer blades do not have complex structures or installation procedures, you only need to connect them to your mixer. For washing, you can put it in the dishwasher to free your hands or brush it by holding the head. Shredding In All Directions This blender blade features a 6-blade staggered design. It is the best replacement for your blender blades as it achieves all round chopping at high speeds with no dead angles.. Package includes 1 6-Blade Replacement. Please pay attention to safety during installation and cleaning When not in use, please keep it out of reach of children.

PACKAGE INCLUDES 1 7-Fins Extractor Blade 703KKU100.. COMPATIBILITY Compatible with Nutri Ninja Blender SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT, SS400, SS400C, SS401, SS401C, CO101B, CO150B, CO351B, CO401B.. GOOD REPLACEMENT The extractor blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here.. SUPERIOR QUALITY Well-Designed, made of high quality food grade materials and stainless steel, BPA free Dishwasher safe, rigorously tested, no leaks, durable and longevous.. NOTE We don't claim these are original product..

PACKAGE INCLUDES 1 6-Blade Replacement.. COMPATIBILITY Compatible with Ninja Blender BL500 BL500C BL550 BL610 BL642 BL660 BL660C BL700 BL700C BL700RC BL700WM BL740 BL770 BL771 BL780 BL780CO NC600CCO NJ600 NJ600C NJ600RC NJ602 NJ602CO NJ602NQ NJ602Q NJ602W and more.. GOOD REPLACEMENT The 6-blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here.. SUPERIOR QUALITY Well-Designed, made of high quality food grade materials and stainless steel, BPA free Dishwasher safe, rigorously tested, durable and longevous.. NOTE We don't claim these are original Nutri Ninja product, but it will fit and work like the original. If you have any questions, please feel free to contact us..

Only For - This replacement Blade Only compatible with Ninja Foodi Power Blender CO101B, CO351B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT,CO401B, SS400, SS400C, SS401, SS401C. Please check your Ninja Blender model.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

PERFECT REPLACEMENT Replacement 4-blade compatible with Ninja NJ110GR Food Chopper Express Chop 200-Watt, 16-Ounce Bowl.. EXCELLENT QUALITY The chopper blade for ninja is made of food grade stainless steel, BPA free, corrosion-resistant, and dishwasher safe. Our food chopper blade for ninja food processor are sharper and stronger than other blade, allowing for better mixing of your food and ensuring repeated crushing.. EASY TO CLEAN AND INSTALL Chopper express blade for Ninja have no complicated installation procedures, you can install them independently without any tools. The hard surface of the blade has an anti-scratch coating, the smooth surface is not easy to have food residue, not only durable but also very easy to clean.. A SOLID INVESTMENT The frequent need to replace the blades can be tiresome and expensive, but not with our high hardness blades. Made of superior quality stainless steel, it is more durable. You don't need to buy a brand new ninja food processor, saving you a lot of time and money. The performance is as good as the original one.. PRECAUTIONS The package only contains a food chopper blade. Please note that the pitcher is not included. The replacement 4 fin blade is very sharp, please pay attention to safety when installing and cleaning. When not in use, please put it out of the reach of children..

Attention This is 6 female fin blade, 4 inches10 cm in diameter. Before purchasing, please check your existing blade and count the number of blade fins on the blade. The fins on the blade should be female, Please check all pictures carefully for compatibility.. No Suitable forNot for 16oz cups or 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.NOT for COSSCT series 7-fins blender such as CO101B, CO351B, CO401B,SS100, SS101, SS150, SS151,SS300,SS350, SS351, SS400, SS400C, SS401, SS401C,TB300, TB301, TB400, TB401C, etc.. No Suitable for NOT for 7 fins blade .Not for Nutri Ninja Auto iQ NN100, NN100A,NN101,NN102,BL2012,BL2013,BL450-30,BL455-30,BL481-30,BL482-30,BL485,BL486CO,BL487,BL487A,BL487T,BL491,BL492,BL492IS-30,BL494,BL640-30,BL641-30,BL642-30,BL680A-30,BL681A,BL681C,BL682-30,BL682QT-30,BL685-30,BL687CO-30,CT680SS,CT680CO2SS,CT641-30 Please confirm your blender need 6 fins replacement blade before purchasing.. Updated Blade StyleThis latest replacement blade for ninja blender overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

AttentionThis is 4inch 7fins male blade ,Take out a credit card and compare it with your machine as shown in the figure. If the length of the credit card is almost the same as the diameter of the machine, please buy 3.35inch blade instead of the 4inch blade. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.NOT for these COSSCT series 7-fins blender such as CO101B, CO351B, CO401B,SS100, SS101, SS150, SS151,SS300,SS350, SS351, SS400, SS400C, SS401, SS401C,TB300, TB301, TB400, TB401C, etc.. Updated Blade StyleThis latest replacement blade for ninja blender overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

AttentionThis is 3.35inch 5fin male blade.Take out a credit card and compare it with your machine as shown in the figure. If the length of the credit card is much smaller than the diameter of the machine, please buy 4inch blade instead of this 3.35inch blade.. Suitable forThe 5 Fins blender blade only fit for QB series Ninja blender models such as QB3000, QB3000SSW-30, QB3000QR-30, QB3001SS-30, QB3000QBK, QB3004, QB3005.. No Suitable forNot for 7 fins or 6fins ninja blender blade. Not for 18oz 24oz 32oz ninja cups.Not for BL204,BL710,BN300, BN301, BN302,BN305. UpgradeThis latest ninja blender blade comes with new blade on the top. This blade is proven to have better balance and greater applicability.BPA free and Dishwasher safe.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

Only For - This replacement Blade Only compatible with Ninja Foodi Power Blender CO101B, CO351B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT,CO401B, SS400, SS400C, SS401, SS401C. Please check your Ninja Blender model.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

COMPATIBLE MODELSReplacement 6 blade compatible with Ninja blender 72 Ounce Pitcher 1100w 1200w 1500w, including BL550 BL500C BL500, BL610, BL642, BL660, BL660C, BL700WM, BL700RC, BL700C, BL700, BL740, BL770, BL771, BL780, BL780CO, NC600CCO, NJ600, NJ602, NJ600C, NJ600RC, NJ602CO, NJ602NQ, NJ602Q, NJ602W and more. HIGH QUALITYThe 6-blade replacement is made of food-grade stainless steel with corrosion resistance and free BPA which is quite safe. The blades excellent sharpness and 6-blade design can blend your food well without leaving bits and pieces of unblended bits. EASY TO INSTALL CLEANThe mixer blades do not have complex structures or installation procedures, you only need to connect them to your mixer. For washing, you can put it in the dishwasher to free your hands or brush it by holding the head. 6-BLADE REPLACEMENTThe 6-blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here. PACKAGE INCLUDES1 6-Blade Replacement. Please pay attention to safety during installation and cleaning When not in use, please keep it out of reach of children.

Only For - This replacement Blade Only compatible with Ninja Foodi Power Blender CO101B, CO351B, SS100, SS100C, SS101, SS101C, SS101NP, SS101Q, SS101QS, SS101TGT, SS150, SS151, SS150C, SS151C, SS151HMT, SS151HRD, SS151HSL, SS300, SS300C, SS350, SS351, SS351B1NP, SS351C, SS351NP, SS351TGT,CO401B, SS400, SS400C, SS401, SS401C. Please check your Ninja Blender model.. Updated Blade StyleThis latest replacement ninja blender blade overcome the CrackLeaksRust issues for customers after a long period of research and testing in the design and production process.BPA free and Dishwasher safe.. No Suitable forNot for 16oz cups or blender comer with 3.35 inch blade such as these model BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,Bl810,BL820,BL830.. No Suitable forNOT for 6 fins blender,NOT for blender come with female blade.. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service for you..

?IMPORTANT?This blender replacement blades is compatible with Nutri Ninja 4 10 cm diameters cups 7-fin male Auto-iQ AMZ012BL493BRN, BL20122013, BL450450-30451-30454456480-30480481-30482-30486487488490-30491-30492-30492493494640641642680681682685687910, BN400401750751753800801803805, CT640641680682, DB750751, NN100101102210, KS500, BR601, CO90, CL405401. ?IMPORTANT? Optimally Sized Precision This replacement parts for Ninja blender feature a 4 10 cm diameter and fits only 18 oz and 24 oz cups. Please check your original blade and shaft for a secure fit. Package Includes Complete set with 1 blender blade, 1 durable rubber gasket for a secure seal, 1 gasket remover tool and 1 cleaning brush for easy, thorough maintenance. Tough Safe Materials These blender replacement parts are made from food grade stainless steel and plastic for durability and safety, with a design that prevents cracks, leaks, and rust. Easy to Clean Maintain The blender blade replacement is quick to rinse and simple to maintain, helping you spend less time cleaning and more time blending your favourite drinks.

PACKAGE INCLUDES 1 Chopping Blade.. COMPATIBILITY Compatible with Ninja Blender BL680 BL680A BL681A BL681C BL682 BL685 BL687CO BL770 BL770AMZ BL770W BL771 BL772 BL773CO BL780 BL910 BN600 BN601 BN601NP BN601WBKT BN800 BN800C BN801 BN801C CT680 CT680CO2SS CT680SS CT680SSCCO CT680W CT682SP and more.. GOOD REPLACEMENT The 4-blade replacement will extract vital nutrients, giving you optimum nutrition in every smoothie. Transforming your life starts here.. SUPERIOR QUALITY Well-Designed, made of high quality food grade materials and stainless steel, BPA free Dishwasher safe, rigorously tested, durable and longevous.. NOTE We don't claim these are original Nutri Ninja product, but it will fit and work like the original. If you have any questions, please feel free to contact us..

COMPATIBILITY Designed as a perfect Ninja blender blade replacement, fits Ninja Blender BL680 BL680A BL681A BL681C BL682 BL685 BL687CO BL770 BL770AMZ BL770W BL771 BL772 BL773CO BL780 BL910 BN600 BN601 BN601NP BN601WBKT BN800 BN800C BN801 BN801C CT680 CT680CO2SS CT680SS CT680SSCCO CT680W CT682SP and more. MATERIAL The 4 blade replacement is made of food-grade stainless steel and free BPA. Dishwasher safe, easy to clean. INSTALLATION Easily replaces your worn or damaged blade - fits securely into the original Ninja blender base. DESIGN Features a 4 fin blade system that delivers consistent and efficient chopping results. CUSTOMER SERVICE Any question, please send us message, we will reply to you soon.

PREMIUM QUALITY 7 Fins, 4inch10cm Diameter, 187gpc, Made of High Quality 100 BPA-free High Impact Plastic and Food-grade High-strength Stainless Steel, Dishwasher Safe. Precision Durable and Work Great. Easy Installation and Cleaning, Perfectly Match of Original Parts.. COMPATIBLE WITH Fits Nutri Ninja 10cm Diameters Cups, 7-Fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 Please Confirm Your Blender Need 7 Fins Replacement Blade Before Purchasing.. PERFECT USAGE Great for Smoothies and Frozen Drinks the Replacement Extractor Blade is Perfect for Chopping, Grating and Blending. Whips up Your Favorite Foods and Smoothies in Second without any Leakage.. PACKING INCLUDES 2x 7 Fins Replacement Blade Assembly With One Rubber Gasket on, 1 x Replacement Rubber Gaskets.. NOTICE We Make No Claims that These are Original Nutri Ninja Products. The Brand Mentioned, Model or Part Designation is not Working as Trademark, ONLY Applied to Demonstrate Compatibility..

Enhanced Compatibility This blender replacement part is meant to provide full compatibility with the following models Nutri Ninja Auto iQ NN100, NN100A,NN101,NN102,BN401,BL2012,BL2013,BL450-30,BL455-30,BL481-30,BL482-30,BL485,BL486CO,BL487,BL487A,BL487T,BL491,BL492,BL492IS-30,BL494,BL640-30,BL641-30,BL642-30,BL680A-30,BL681A,BL681C,BL682-30,BL682QT-30,BL685-30,BL687CO-30,CT680SS,CT680CO2SS,CT641-30.. High Grade Steel Unlike similar products on the market, we used premium durable materials during the manufacturing process, combining rustproof heavy duty stainless steel with non-BPA food-grade plastic, for enhanced safety.. Leakproof Seal Ring This Ninja replacement blade includes a superior grade tight sealing ring which prevents leaks, keeping the liquid properly contained without making a mess.. Increased Performance Featuring ultra-sharp and durable blades, with a heavy duty long-lasting construction, this smoothie blender part keeps your personal blender running smoothly, easily crushing through fruits, veggies, protein shakes or smoothies.. Easy to Wash Unlike similar products on the market, these Ninja blender accessories are dishwasher safe and easy to clean, without rusting or interfering with the taste or flavor of your ingredients..

CompatibilityThis is 6 female fin blade, 4 inches10 cm in diameter. They compatible with Ninja blender Auto iQ 900W BL450-70, BL451-70, BL454-70, BL455-70, BL456-70, 1000W BL480-70, BL480D-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70, BL482Q-70. Before purchasing, please check your existing blade and count the number of blade fins on the blade. The fins on the blade should be female, Please check all pictures carefully for compatibility. Premium Material6 female fins blades, 3.94 inches10 cm in diameter, made of premium BPA-free impact-resistant plastic and food-grade high-strength stainless steel, dishwasher safe. Easy to install and clean, perfect match with the original parts. We upgraded the carbon steel bearings of this 6 female fins blades to 404 stainless steel high-speed bearings, which greatly improved the product strength. Notes? Please read the pictures, bullet points, A content carefully before buying to ensure compatibility. Ninja blender has 6 female fins not 7 fins or 6 male fins, diameter 4in10cm. Fit for 18oz 24oz 32oz cups, not fit for 16oz cups. Before use, make sure the blades are firmly screwed onto blender cup. There is already a gasket inside the blade, and the gasket included in the package is extra. The gasket may come loose during shipping, please make sure it fits snugly before use. Easy to UseGreat for making smoothies and frozen drinks. The 6 female fins blade replacement is perfect for chopping, grating and blending. Quickly blend foods and smoothies without any leaks. If the extractor blade leaks, it is most likely that the gear fins on the back are loose, so just tighten them. Package Include1 6 female fins replacement blades assembly there is already a gasket inside the blade, 3.94 inches10 cm in diameter, 1 hook, 1 cleaning brush,1 extra rubber gasket. If you have any questions, please contact us and we will give you a satisfactory solution within 24 hours.

RELIABLE QUALITY 7 fins, 4inch10cm diameter, 187gpc, made of BPA-free plastic and food-grade high-strength stainless steel, dishwasher safe. Precision durable and work great. Easy installation and cleaning, well match of original parts. Important Compatibility Notice Only compatible with Nutri Ninja 10 cm diameter cups that require 7-fins blade assemblies. Supported models include BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, BL401, BL801, NN101, NN102. ? Please double-check your blender model and ensure it requires a 7-fins replacement blade before purchasing.. GOOD USAGE Great for smoothies and frozen drinks the replacement extractor blade is good for chopping, grating and blending. Whips up your favorite foods and smoothies in second without any leakage.. Whats in the Box Includes 2 x 7-fins blade replacement assemblies each with pre-installed rubber gasket 2 x spare rubber gasket Comes ready to use, no additional tools required. Helpful Reminder Before ordering, please double-check your blender model and ensure the cup diameter is 10cm 4 with a 7-fins blade system. Refer to product images for guidance..

Compatible With Ninja Blade Replacement The 5 fin MALE blender blade compatible with Ninja QB series QB3001SS QB3000 QB3004 QB3005 QB3000SSW-30 QB3000QR-30 QB3001SS-30 QB3000QBK QB3004 QB3005. Make sure your blender model is on our compatibility list. Fits for single serve 16 oz cups 3.35 inch8.5cm diameter. 5-Fin blade for quick processing. Fit for single serve blade 16 oz cups, Not fit for 18oz, 24oz, 32oz cups. Please confirm your blender base has 5 fins before purchasing. Not Suitable forNOT for 6 fins or 7 fins with18oz, 24oz, 32oz cups blade such as these model BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, Bl810, BL820, BL830. Not for Ninja SS series such as SS101, SS351, SS300, SS151 etc. High QualityMade of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, super foods and protein shakes into a delicious, smooth texture. Dishwasher safe.Meets or exceeds OEM standards, 100 tested before shipping. Package Included 1 x 5 Fins blender blade , 1 x extra gasket rubber. The rubber gasket had been put into the 5-fins bottom blade assembly. Any questions,please let us know any time.

Our blender blades are manufactured using high-quality and durable materials, combining rust resistant and durable stainless steel with non BPA food grade plastics to enhance safety.. Compatible with BL450_30, BL451_30, BL454QAQ, BL454QBL, BL454QVO, BL454QY, BL456, BL456BRN, BL480_30, BL480D, BL487QH, BL487QPL, BL490_30, BL491_30, BL681C, BL682, BN401, BN401C, BN750, BN750C, BN751, etc. The specific applicable models can be viewed in the pictures or details page.. 7 fins replacement blender blade only fit for 182432OZ cups, NOT FIT for 16OZ.. DISHWASHER SAFE Our replacement parts are easy to clean and can also be cleaned with a dishwasher Clean immediately after use to avoid food residue residue residue.. Our blender parts offers a 30 day warranty. If there are quality issues within 30 days, they can be replaced or returned If you have any questions, please contact us.

Compatibility Compatible with Ninja blenders BL480_30, BL482_30, BL490_30, BL640_30, BL642_30, BL682_30, BN401, BN751, BN801, BL2012, NN102, and more.Please confirm that your blender need a 7 Fins replacement blade before purchasing.. High-Quality Materials Crafted from durable stainless steel and BPA-free high-impact plastic for reliability.. Increased Performance Featuring ultra-sharp and durable blades, with a heavy duty long-lasting construction, this smoothie blender part keeps your personal blender running smoothly, easily crushing through fruits, veggies, protein shakes or smoothies.. Package Includes 1 x 7-Fin Bottom Blade Assembly with rubber gasket, 1 x replacement gasket rubber, 1 x gasket rubber replace tool, 1 x cleaning brush.. AttentionImportant This is 7 fins ninja blender blade only fits for 182432oz cups, Diameter 4 inches10cm. The model number including the last two digits must be exactly the same. IF NOT, DO NOT BUY.

YOU MUST KNOW100 brand new and compatible with Ninja NJ110GR100GR100WM100 Food Chopper Express Chop. Please note that this blade only fits 16oz bowl, does not work with 48oz bowl.. Food Grade MaterialsThe 4-Blade Assembly is made of high quality ABS plastic stainless steel. Non-toxic BPA-free and corrosion resistant. Very easy to chop, mince and puree ingredients into soups, sauces, dressings, toppings, dips more. UniqueEasy to install and use, direct replacement for a proper fit. You deserve good quality product and our 4-blade design with different heights ensure full mixing and provides a delicate output. The high hardness blades are very sharp, rust resistant and durable to use.. Great-valueInstead of buying a brand new chopper just because your old chop blade is broke, you can buy a new blade accessory for a fraction of the cost and get your machine working again. Definitely a cost-effective investment for your family. Package1x Replacement Blade. We make no claims that these are original Ninja products. But they work as great as the original indeed Please pay attention to safety when installing or cleaning, because it is really sharp. Do not allow baby or children to touch..

PLEASE CHECK YOUR MIXER MODEL The blender 6 blade compatible with ninja 1100W 1200W 1500W kitchen mixer system, perfectly matches Ni-nja 72 oz pitcher BL500 BL500C BL660 BL660C BL642 BL700 BL700C BL780 NJ600C NJ600RC NJ602CO NC600CCO.. Top Quality Food Grade Materials This blender replacement blade is forged from the finest steel and sterilised at over a thousand degrees Celsius to be fully food safe. This makes the blender parts incredibly sharp, unbendable and deformable, as well as safe and harmless. Shredding In All Directions This blender blade features a 6-blade staggered design. It is the best replacement for your blender blades as it achieves all round chopping at high speeds with no dead angles.. Easy To Clean This blender blade is very simple to clean, most of the time you just need to rinse it off. If you accidentally get grease stains on it, all you need to do is wipe it off with paper after rinsing. Of course, you can also put it in the dishwasher. NOTENOTENOTE To avoid cuts, keep your hands, other body parts and valuables away from the 6-blade..

Compatible ModelThe 7 fins blade is compatible for Ninja blender BN400,BN401,BN750,BN751,BN800,BN801,BN801C,BL450_30,BL480_30,BL482_30,BL492_30,BL493,BL494,BL640_30,BL641_30,BL642_30,BL680_30,BL682_30,NN100,NN101,NN102,NN210 .etc. Quality MaterialBuilt with stainless steel blade and Food-grade plastic housing, this blade for ninja blenders is rust-resistant, safe and durable. The upgraded bearing system delivers stronger torque, enhanced sealing, and reduced leakage or vibration for longer-lasting performance. Ideal for health conscious individuals, our 24oz blender cups and set allows you to create fresh and nutritious juices and beverages.Whether you're a busy professional, a student on the go, or simply want to enjoy a refreshing drink at home, our blender cups and set is perfect for many occasions. Packing Includes2x 24 oz cups,2x Sip Seal Lids,1x 7 fins replacement blade assembly there is already a gasket inside the blade, 1 hook, 2 brushes,1 extra rubber gasket. Note1. Please read the pictures, bullet points, product description carefully before purchasing to ensure compatibility. 2. Only fit for 7 fins blade base not 5 fins or 6 fins. 3. Only fit for 18oz 24oz 32oz cups, not fit for 16oz cups.4.We don't claim these are original Nutri Ninja product.

Upgraded Sip Seal Lids - Never Leak and easy to open and close design. More convenient to drink directly.. All Components are BPA free. Made from Tritan Material for Durability and Clarity and Dishwasher Safe.. Can replace the original 24Oz, 18Oz and 32 Oz cups. Compatible with Ninja BL480, BL490, BL640, BL680 Auto IQ Series and Ninja Foodi Smoothie Bowl Maker ss100, ss101 ,Foodi Power blender ss351.ss401. Package include 2X Cups 24 oz and 2x Sip Seal Lids. Please do not overfill To avoid spilling, do not add ingredients past the Max fill line.

Please Check Your Model BEFORE PURCHASING Please check your existing blade for the following 1 Count the FINS IT SHOULD BE 6-FINS. 2 The blade has MALE FINS. 3 Blender Base Diameter Should be 3.35 8.5cm . NOTE Please check your blender model and fins quatity before purchasing.. PACKAGE INCLUDES 1 Single Serve Blade6 Fins, 2 16-Oz Single Serve Cups with Lid. Blender replacement parts compatible with Ninja BL770, BL771, BL772, BL773CO ,BL780, BL660, BL740. Not fits 18oz, 24oz, 32oz. PREMIUM QUALITY The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, BPA free, dishwasher safe, reusable and easy to clean. Well-tested by the manufacturer.. EASY TO USE Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.. AFTER-SALES SERVICE This is non-original aftermarket parts. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..

Please Check Your Mixer ModelThis ninja 6 blades replacement is compatible with ninja 1100W 1200W 1500W kitchen mixer system, perfectly matches Ni-nja 72 oz pitcher BL500 BL500C BL660 BL660C BL642 BL700 BL700C BL780 NJ600C NJ600RC NJ602CO NC600CCO. Safe MaterialThe 6 blade replacement for Ninja blender 72oz is made of food-grade stainless steel with corrosion resistance and free BPA which issafe and harmlesssharpness and 6-blade design,unbendable and deformable,The blades can blend your food well. Easy To CleanThis blender blade If you accidentally get grease stains on it,you just need to rinse it off,you can also put it in the dishwasherPlease be careful when washing. Saving MoneyThis ninja 6 blades replacement for Ninja can replace your original dull or damaged blades to save you amount of money,without buying another new blender. NoteONLY 6-BLADE REPLACEMENT for NINJA is in the package,We don't claim our replacement blade is originalavoid cuts Please be careful .

PREMIUM QUALITY 6 Fins,4inch10cm Diameter, Made of High Quality Eco-friendly Plastic and Food-grade High-strength Stainless Steel, Dishwasher Safe. Precision Durable and Work Great. Easy Installation and Cleaning, Perfectly Match of Original Parts.. PERFECT USAGE Great for Smoothies and Frozen Drinks the Replacement Extractor Blade is Perfect for Chopping, Grating and Blending. Whips up Your Favorite Foods and Smoothies in Second without any Leakage. 1 Before Using the Blade, Please Check the Rubber Gasket and Be Sure It is Put Snugly into the Replacement Bottom Blade. 2 Please TAKE OFF the PRE-INSTALLED GASKET in the Bottom Blade, if You're Going to Use the New Replacement Gasket.. COMPATIBLE WITH Fits for Nutri Ninja 3.9in10cm Diameters Cups, 6-FIN Ninja Professional Blender, As Shown on Pic 3 and Pic 4. Please Confirm Your Blender Need 6 Fins Replacement Blade and 10cm Diameter Before Purchase.. PACKING INCLUDES 1x 6-Fin Replacement Blade Assembly.. NOTICE We Make No Claims that These are Original Nutri Ninja Products. The Brand Mentioned, Model or Part Designation is not Working as Trademark, ONLY Applied to Demonstrate Compatibility..

High Quality Ninja Blenders These small blender bullet blade are made of durable and food grade PP and stainless steel material. These replacement blades for ninja blender cups are perfect for your mixer grinder. The bullet blender has been well-tested by the manufacturer.. Diameter of Ninja Bullet Blender These replacement parts have diameter about 3.35 inch and also has 4 blades, these sharp blade effortlessly pulverizes fruits, vegetables, superfoods, ice and protein shakes into a delicious, smooth texture.. Compatibility The blender replacement parts fits for ninja blenders BL770A, 30BL770, 30BL773CO, 30BL771, 30BL772, 301200W NINJA BLENDER BL780, 30BL780C0. These ninja blender replacement parts are easy to install and use without any technical issue.. Design and Color of Ninja Blender Parts These blender cutter blade replacement are design to upgrade your blender machine and these ninja bullet blender blade have black color which doesn't look odd when attached. You can enjoy fresh juice with super ninja steel blade.. Features of Blade You can simply attached mini with your blender. These magic blender bullet blades are also dishwasher safe and easy to clean, never blend warm liquids in ninja blender because it may cause to damage..

COMPATIBILITY7 fins Blade Apply to BL450-30, BL455-30, BL480D, BL481-30, BL482-30, BL486CO, BL487, BL487-30, BL487A, BL487A-30, BL487T, BL487T-30, BL488W, BL490, BL491, BL492, BL492W, BL492IS-30, BL640, BL640-30, BL641, BL641-30, BL642, BL642-30, BL642W1-30, BL680A, BL680A-30, BL682, BL682-30,BL682QRT-30, BL685-30, BL2012, BL2013, CT641-30, CT680SS, CT680CO2SS, CT680CO2SS-30, BL687CO-30, NN100, NN100A, NN100-30, NN101, NN101-30, NN102Only fit for 18oz, 24oz, 32oz cups not fit for 16oz. Not fit forBL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, BL820, BL830, BL450, BL456-30,BL451-70, BL454-70, BL482-70, BL480, BL480D-30. Compatible with ninja blades replacement and Compatible with ninja replacement blades.. SIZE7 Fins Replacement Blade Compatible with ninja blender blade replacement and Compatible with ninja replacement parts, 410CM diameter, 165g, made of food grade PP and stainless steel Should you have any question about this item, feel free to contact us Replacement Blade, 410CM diameter, 165g, made of food grade PP and stainless steel Should you have any question about this item, feel free to contact us . IMPORTANT NOTENote1 please make sure you close the bottom blade tight enough on the cup before using it. Note 2 The rubber gasket in the bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it.. PACKAGE INCLUDED 1 x 7 Fins Bottom Blade Replacements, 2 x Replacement Gasket Rubber One Gasket Rubber already on the 7 fins replacement blade . If you have any questions please contact us by free, we will provide refund replacement to you..

BEFORE PURCHASING PLEASE CHECK YOUR EXISTING BLADE BY COUNTING THE FINS IT SHOULD BE FEMALE Fin's on the Blade and 4 10cm Diameter. BEFORE PURCHASING Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.. FIT for Nutri Ninja Auto iQ BL480 BL480D BL482 Ninja Professional BL456 Blenders. Made of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, vegetables, super foods and protein shakes into a delicious, smooth texture. Dishwasher safe..

Perfect Replacement This ninja 6 blades replacement is compatible with nin-ja 1100w 1200w 1500w kitchen mixer system, perfectly matches Ni-nja 72 oz pitcher NJ600C NJ600RC NJ602CO BL660 BL642 BL660C BL700C BL700 BL500 BL500C BL00780 NC600CCO.. SAFE QUALITY MATERIALThe ninja replacement blades is made of food-grade stainless steel, which is BPA-free, corrosion-resistant and quite safe. Our high durometer blades are sharper and stronger than others, and the high durometer blades make it easier to stir food and ensure adequate mixing. You can use it for quite a while before it needs to be replaced.. A SOLID INVESTMENTThe frequent need to replace the blades can be tiresome and expensive, but not with our high hardness blades. Made of superior quality stainless steel, it is more durable, especially when you compare it to its counterparts. This makes it a great investment for you and your machine, reducing the number of necessary replacements and saving you time and money. EASY TO INSTALL AND CLEAN The ninja blender blade replacement comes already assembled, there is no complicated installation procedure, you just need to attach it to your Ninja Blender. The surface of the blade has an anti-scratch coating, and the smooth surface is less prone to food residue, making it easier to clean.. ATTENTIONSThe package only contains a ninja replacement blades. Please note that the pitcher is not included. The ninja blades replacement 6 fin is very sharp, please pay attention to safety when installing and cleaning when not in use, please put it out of the reach of children. If you encounter any problems during use, please contact us in time, we will solve all your problems..