FITMENT - The fender eliminator is fit with Ninja 400 Z400 2018 2019 2020 2021 2022 2023 Ninja 250 fender eliminator 2018-2023 2024 2025 2026 Ninja 500 fender eliminator Ninja 500 se Z500 fender eliminator2025 KTR 500 fender eliminator. FEATURE - Ninja 400 fender eliminator is fit with OEM and aftermarket turn signals.. REINFORCED WELDING - Add welds on the back of the 2026 Ninja 500 se fender eliminator Avoid vibration and noise during driving.. NEAT APPEARANCE - The size of the 2026 Ninja 500 tail tidy is 73.5 inches. Looks more concise than the factory license plate bracket.. PACKAGE - Ninja 500 fender eliminator comes with 1 rubber grommet, 4 nuts and screws and washers, 2 rubber plugs..

FITMENT - The fender eliminator is fit with Ninja ZX6R ZX-6R Ninja 636 2019 2020 2021 2022 2023 2024 2025 2026. FEATURE - 2025 2026 Ninja ZX6R Fender Eliminator is fit with OEM and aftermarket turn signals. No need for cutting or modification. Plug and play. EASY TO INSTALLA - The installation holes of 2026 ZX6R tail tidy have screws embedded. Simply align the mounting holes of the bike and screw in the bolts, without the need to install screws one by one.. POWDER COATING - The 2026 ZX6R License Plate Bracket is industrial grade powder coated. The finish is uniform and durable. Can withstand a variety of outdoor riding conditions.. REINFORCED WELDING - Add welds on the back of the ZX-6R fender eliminator Avoid vibration and noise during driving. At the same time, it is sturdy and not easily broken..

FITMENTZ650 fender eliminator compatible with Ninja 650 Z650 ZX650 2017 2018 2019 2020 2021 2022 2023.. MATERIALOur motorcycle Z650 fender eliminator was made of Aluminum-Stainless steel bracket.Gorgeous anodized surface, ninja Z650 tail tidy does not oxidize and scratch can tidy up your motorcycle well and definitely improve the look of your Ninja 650.. FUNCTIONThe 2023 Z650 license plate holder can adapt with original, aftermarket turn signals even home-made turn signals.. PROTECTIONThis 2023 Z650 fender eliminator comes with a rubber ring for protecting the cables to avoid scratch.. NOTEThis Z650 fender eliminator does not fit with 2016. Please check the model..

New Rage Cycles Fender Eliminator Compatible for Kawasaki Z900 2020-Present No Thanks.

FITMENT This motorcycle fender eliminator fit for Kawasaki Ninja 650 Z650 EX650 models from 2017-2025, Make your ninja 650 Clean, tucked appearance, eliminates bulky 'whale tail' factory fender.. Heavy-Duty Aluminum With Anti-Corrosion Finish Built from rigid aluminum with a corrosion-resistant surface, this Ninja 650 fender eliminator prevents rust, resists scratches, and provides long-lasting durability for Ninja 650 and Z650 riders.. Works with OEM Aftermarket Turn Signals The Ninja 650 tail tidy bracket is engineered to fit OEM indicators, properly sized rubber grommets for clean wire routingNo drilling required or modification required.. Reinforced Mounting Points Reduce Vibration Reinforced mounting slots and upgraded welds help reduce plate vibration and noise at high speed, includes lock nuts to prevent loosening from vibration.. Plug-and-Play Kit with Hardware Included This Ninja 650 plate holder kit includes the required bolts, washers, a protective rubber grommet for cable protection.Instruction manual included in the box, no drilling required installation time is approximately 30 to 60 minutes..

FITMENT This motorcycle fender eliminator compatible with Kawasaki Ninja 500 2024-2025 Ninja Z500 2024 Ninja 400 2018-2023 Ninja Z400 2018-2023 Ninja 250 2018-2025.. Heavy-Duty Aluminum With Anti-Corrosion Finish Built from rigid aluminum with a corrosion-resistant surface, this Ninja 500 fender eliminator prevents rust, resists scratches, and provides long-lasting durability for Ninja 400 and Ninja 250 riders.. Works with OEM Aftermarket Turn Signals The Ninja Z500 license plate bracket is engineered to fit OEM indicators, most aftermarket signals, and custom turn-signal setupsno cutting or modification required.. Reinforced Mounting Points Reduce Vibration Reinforced mounting slots and upgraded welds help reduce plate vibration and noise at high speed, giving this Ninja 400 fender eliminator improved strength over the factory bracket.. Plug-and-Play Kit with Hardware Included This motorcycle Ninja Z400 license plate bracket includes the required bolts, washers, a protective rubber grommet for cable protection and installation manual.Simple bolt-on tail tidy installation with no drilling..

Compatibility Rear Tail Tidy Is Compatible with Z650 2017-2025, Ninja 650 2017-2025, Ninja 650 KRT ABS 2022-2024, Z650 ABS 2019-2024, Ninja 650 ABS 2017-2024, Ninja 650 KRT 2022-2024.. Optional Hole Mountings Fender Eliminator Kits Not only Support to Mount Original Blinkers and 10mm Aftermarket Turn Signals, But Suitable for Stock LED License Plate Light.. Precision Construction Using Aluminum Alloy Constructed, Precision-cut with Black Powdercoat and Stainless Steel Mounting Hardware Incluede for Durability and Longevity.. Carbon Fiber Look License Plate Frame Customised Drill Hole Design 4.0 x 7.0-inch for Regular License Plate, Helps Your License Plate Installed on the Plate Holder Securely.. Simple Installation Equipped with Complete Hardware, Rear Tail Tidy Supports for Quick Installation and Keep Stable..

Direct-Fit for Key Kawasaki Models Engineered to fit Ninja 400 Z400 20182024 and Ninja 250 20182023 also compatible with many Ninja 500 Z500 variants especially newer 2024. Please verify modelyear before ordering.. Precision Fabrication Corrosion-Resistant Finish CNC-cutaluminum bracket with durable powder coat or anodized finish and stainless mounting hardware built to resist road corrosion and vibration.. Clean, Aggressive Tail Tidy Sharp OEM-Style Look Instantly transforms the bulky rear fender into a sleek, minimalist tail tidy for a sportier, modern appearance that highlights your bikes lines.. Complete Mounting Hardware Quick Install Includes the license-plate bracket and all stainless mounting hardware and rubber grommets for a bolt-on installation with basic hand tools. License-plate light or turn signals not included see notes below.. Street-Legal Reminder Who This Is For Designed for riders, DIY modifiers and small shops who want a clean tail look note local laws require plate visibility and illumination. You may need to fit an LED plate light or relocate turn signals to meet regulations..

VEHICLE SPECIFIC FITMENT Specially designed for 2017-2026 Kawasaki Ninja 650 and Z650 motorcycles. This fender eliminator provides a tailored fit for the rear tail section of your sportbike. Please check your model year before ordering.. DURABLE ALUMINUM CONSTRUCTIONCrafted from high-quality aluminum for long-lasting durability and a lightweight feel. The black finish provides a clean, professional aesthetic that blends seamlessly with your bike's rear profile.. STREAMLINED TAIL APPEARANCEDesigned to eliminate the bulky factory rear fender, offering a sleek tail tidy look for your sportbike. Helps enhance the overall appearance of your bikes rear end while maintaining secure plate mounting.. REUSE STOCK COMPONENTS Engineered to be compatible with your motorcycle's original turn signals and license plate light. No additional lights are included, allowing you to easily reuse your factory signal components for a straightforward installation.. MOUNTING HARDWARE INCLUDEDKit includes 1 x fender eliminator bracket, 4 x screws, 4 x nuts, and 4 x washers. No tools or installation instructions are included professional installation is recommended for a secure fit..

Comes with all necessary hardware. Plug and Play, simple installation. Add style to your ride. Compatible With R1 2015-Present Street Bikes.

Specific Fitment Fender Eliminator Compatible with Ninja 500 2024-2025, Ninja 250 2018-2024, Ninja 400 2018-2025, Z250 2019-2024, Z400 2019-2025, Z500 2024-2025.. Material Rear Tail Tidy Is Made of 3.0mm Aluminum Alloy.. Compatibility Supports to Install Original Blinkers and Aftermarket 10mm Turn Signals.. LED License Plate Light Suitable for Original LED License Plate Light and Package Included a New One.. Complete Hardware Include Easy to Mount..

Comprehensive Compatibility Ninja 400 fender eliminator kit for Ninja 400 Z400 2018 2019 2020 2021 2022 2023 2024 Ninja 250 2018 2019. Please check the year and model of your motorcycle before purchasing. Premium Construction Ninja 400 fender eliminator is crafted from superior metal and features an anodized black powder-coated finish that enhances durability and prevents rust and corrosion, ensuring long-lasting use while maintaining an attractive appearance. Stylish Design Ninja 400 license plate holder features an inverted triangle design that not only improves the aesthetics of your motorcycle but also makes it stand out. The stylish and cool look adds a unique touch to your vehicle. Seamless Integration Versatility Z400 fender eliminator is designed to fit perfectly with both OEM and aftermarket turn signals. It offers a cohesive look and functionality, and its precise engineering ensures seamless integration with your motorcycle. Easy Installation The plug and play installation method is straightforward. The fender eliminator kit includes all necessary accessories for direct installation. The kit comprises 1 license plate bracket, 2 aluminum columns, and 1 installation manual.

Applicable Models Years License Plate Bracket Fit for CBR650R CB650R 2021-2026, CB1000 Hornet SP 2025-2026.. High-strength Material Crafted from Aluminum Alloy, Precision Fabrication and Corrosion-Resistant Finish and Well Welding Ensures Tail Tidy Not Easy to Corroded and Bent.. Hole Design CYCBOLT Fender Eliminator Special Drill Hole to Fit with OEM Blinkers Aftermarket 10mm Turn Signals, Only Suitable for LED License Plate Light Package Included.. Simple Assembly Bolt-on Installations, Mounts with Existing Holes.. Features Equipped with a 4.0 x 7.0-inch Carbon Fibre Look Aluminum License Plate Frame, Enhancing the Sense of Style to Your Motorcycle..

Fits Yamaha R6 2017-Present. Made in the USA. Full line of plug-and-play accessories. Motorcycle is life Customize your life.

Wide Compatibility Fender Eliminator Kits LED Indicator Turn Signal Blinker Compatible with Ninja 250 20192023 Ninja 400 20182025 Ninja 500 20182025 Z250Z300 20192020 Z400Z500 20192025. Please double-check your model and year before ordering. All-In-One Kit Includes a license plate holder with bright LED license plate light and a pair of waterproof amber LED turn signals smoke or clear lens options for better visibility and style. Material License Plate Holder Made from 3mm laser-cut and CNC-bent aluminum, finished with anodizing for rust and corrosion resistancelightweight yet built to last includes a white LED license plate light 3 LEDs.LED Turn Signals Light Made from Acrylic,ABS,PU, and die-cast steel base includes a 270mm cable and adapter. Easy Installation Plug-and-play with included adapters for most models. Manual wiring required for motorcycles with non-standard connectors installation instructions not included. If the turn signal blinks too quickly, please install an LED resistor not included.--Professional installation is recommended if youre not familiar with wiring. ? IMPORTANT INSTALLATION NOTICE PLEASE READ BEFORE PURCHASE - DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire. - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding. - This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

FITMENT - The fender eliminator fits with Ninja 650 Z650 ZX650 2017 2018 2019 2020 2021 2022 2023 2024 2025 .. FEATURE - Ninja 650 fender eliminator is compatible with OEM and aftermarket turn signals.. DURABILITY - Premium aluminum alloy keeps it light anodized finish boosts corrosion resistance and durability.. EASE OF INSTALLATION -The 2023 Ninja 650 fender eliminator comes with a complete set of hardware for a plugandplay install.. PACKAGE - The 2024 Ninja 650 fender eliminator kit includes 1 rubber grommet, 4 nuts and screws with washers, and 2 rubber plugs..

Material Made of CNC Aluminum, adjustable license plate holder,laser cutting,treated with oxidized surface.. Fitment Replacement for Kawasaki Ninja 650 Z650 2017 2018 2019 2020 2021 2022 2023 2024 2025 fender eliminator kit plate holder.. Packaged Listing 1 x license plate light fender eliminator with turn signal light 1 set necessary install hardware.. Function License plate bracket holder protects against the splashing of water and the tires and engines of your motorcycle during using, keeping the motorcycle clean even on wet roads.. Warm Tip Installation instruction is not included and the fender eliminator light need to manually connect the cables..

Clean up the back end of your bike with an NRC-designed fender eliminator kit. Spend less time installing, and more time riding with our line of plug-and-play kits. Visibility during day or night with the brightest 1 mm LEDs offered on the market. Includes. LED turn signals. License plate bracket. License plate light.

Fitment - Compatible with Ninja300 EX300 2013-2020 Ninja250 ZX250 2013-2017Z250 2013-2018 Z300 2015-2018. Integrated LED license plate bracket with indicator, designed for a precise fit and an updated, streamlined appearance for your motorcycle.--NON-OEM product. High-Quality Construction - License plate holder is made from 3mm aluminum plate with laser cutting and CNC bending. Anodized surface resists rust and corrosionincludes mounting position for turn signals. Integrated Tail Tidy - Equipped with a license plate light featuring 3 bright white LEDs 12V1.5W, 35cm cables. Providing clear illumination for the license plate at night, enhancing driving safety.NOTEWiring requires manual connection Not plug-and-play. LED Turn Signal Details - Pair of bright waterproof LED turn signals with clear lenses and steel bases.The length of cable is 270mmIncldue the Adapter ConnectorPlayplug. If you find the plug don't fit it, please manually connect the cables. If the original turn signals are bulbs, a relay and resistor not included must be added. ? IMPORTANT INSTALLATION NOTICE PLEASE READ BEFORE PURCHASE DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire. - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while ridin. - This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

The AVT Ninja 400 z400 Ninja 500 z500 Fender Eliminator FLUSH NI Kit is designed from the ground up to dramatically improve the appearance of your Ninja 400500s tail and install as simply as possible.. The kit includes everything you need to completely replace your stock fender and turn signals with Super Bright LED turn signals and LED lighted license plate bracket. Precision laser cut out of aircraft grade aluminum Powder Coated.. Made IN THE USA.

Clean up the back end of your bike with an NRC-designed fender eliminator kit. Spend less time installing, and more time riding with our line of plug-and-play kits. Visibility during day or night with the brightest 1 mm LEDs offered on the market. Includes. LED turn signals. License plate bracket. License plate light.

Fitment Compatible with Kawasaki Ninja 650 Z650 EX650 2017-2025. Precision-cut fender eliminator kit directly replaces the bulky OEM rear bracket. Please confirm your model year before ordering. Premium MaterialsNinja fender elimination kit is made of a premium aluminum alloy for a lightweight construction and features an anodized surface treatment, significantly enhancing corrosion resistance and durability. Easy InstallationPlug-and-play tail tidy kit comes with a complete set of hardware. No drilling or cutting required for a bolt-on installation with basic hand tools License-plate light or turn signals not included. Works With Oem Aftermarket Turn SignalsEngineered to fit factory indicators and most aftermarket turn signals. Reinforced mounting channels and improved welding help reduce vibration and noise in the panels during high-speed driving. PackageComes with license plate bracket, mounting hardware. Please contact us If you have any fitment questions or need support.

Fitment Compatible with 2018-2025 Z400Ninja 400, 2018-2025 Ninja 250, and 2018-2025 Ninja 500Z500. LED brake tail light license plate bracket holder indicator frame eliminator ensuring perfect fit and enhancing motorcycle's appearance. Note NON-OEM product.. High-Quality License Plate Bracket The tail tidy license plate bracket features a compact design, made from 3mm high-quality aluminum plate with laser cutting, coated surface, and is equipped with clear acrylic lenses and an ABS cover, making it durable and high-quality.. LED License Plate Light The license plate light consists of three super bright white LEDs, powered by 12V1-2W. The LED light with two cables needs to be manually installed, providing clear illumination for the license plate at night, enhancing driving safety. Note The LED license plate light is not plug-and-play.. LED Turn Signals The LED turn signals have two wires positive and negative that need to be manually connected. If the original turn signals are bulbs, a relay and resistor must be added. It is recommended to test with an extra battery for accurate installation on the motorcycle. Please note that the LED turn signals are not plug-and-play.. Easy InstallationThe license plate bracket is easy to install with no instructions needed. Note The license plate frame does not include screws original screws from the vehicle can be used for installation..

Fitment - Compatible with ER-6N ER-6F NINJA 650 EX650 2012-2016. Integrated LED Fender Eliminator with urn signals, aggressive custom profile that reduces both weight and visual clutter,weight-saving transformation. High-Quality Construction - License plate holder is made from 3mm aluminum plate with laser cutting and CNC bending. Anodized surface resists rust and corrosionincludes mounting position for turn signals. Integrated Tail Tidy - Equipped with a license plate light featuring 3 bright white LEDs 12V1.5W, 35cm cables. Providing clear illumination for the license plate at night, enhancing driving safety.NOTEWiring requires manual connection Not plug-and-play. LED Turn Signal Details - Pair of bright waterproof LED turn signals with clear lenses and steel bases.The length of cable is 270mmIncldue the Adapter ConnectorPlayplug. If you find the plug don't fit it, please manually connect the cables. If the original turn signals are bulbs, a relay and resistor not included must be added. ? IMPORTANT INSTALLATION NOTICE PLEASE READ BEFORE PURCHASE DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire. - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding. - This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

Fitment - Compatible with NINJA650 EX650 2017-2024 Z650 ER650 2017-2024. Integrated LED Fender Eliminator with urn signals, aggressive custom profile that reduces both weight and visual clutter,weight-saving transformation. High-Quality Construction - License plate holder is made from 3mm aluminum plate with laser cutting and CNC bending. Anodized surface resists rust and corrosionincludes mounting position for turn signals. Integrated LED Illumination - Equipped with a license plate light featuring 3 bright white LEDs 12V1.5W, 35cm cables. Providing clear illumination for the license plate at night, enhancing driving safety.NOTEWiring requires manual connection Not plug-and-play. LED Turn Signal Details - Pair of bright waterproof LED turn signals with clear lenses and steel bases.The length of cable is 270mmIncldue the Adapter ConnectorPlayplug. If you find the plug don't fit it, please manually connect the cables. If the original turn signals are bulbs, a relay and resistor not included must be added. ? IMPORTANT INSTALLATION NOTICE PLEASE READ BEFORE PURCHASE DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire. - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding. - This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

Fitment - Compatible with NINJA650 EX650 2017-2024 Z650 ER650 2017-2024. Integrated LED Fender Eliminator with urn signals, aggressive custom profile that reduces both weight and visual clutter,weight-saving transformation. High-Quality Construction - License plate holder is made from 3mm aluminum plate with laser cutting and CNC bending. Anodized surface resists rust and corrosionincludes mounting position for turn signals. Integrated LED Illumination - Equipped with a license plate light featuring 3 bright white LEDs 12V1.5W, 35cm cables. Providing clear illumination for the license plate at night, enhancing driving safety.NOTEWiring requires manual connection Not plug-and-play. LED Turn Signal Details - Pair of bright waterproof LED turn signals with clear lenses and steel bases.The length of cable is 270mmIncldue the Adapter ConnectorPlayplug. If you find the plug don't fit it, please manually connect the cables. If the original turn signals are bulbs, a relay and resistor not included must be added. ? IMPORTANT INSTALLATION NOTICE PLEASE READ BEFORE PURCHASE DO NOT install directly. Please test the wires with an external battery before installation to confirm the function of each wire. - Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding. - This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

Fitment Fender eliminator kit for Kawasaki Ninja 500 Z500 2024-up, ensuring a perfect fit without compromising the motorcycle's sleek look. Precision-Designed for Secure Fit The Ninja 500 fender eliminator is meticulously designed to fit both OEM and aftermarket turn signals, ensuring a perfect match with your motorcycle. It remains securely in place even on rough and uneven roads. Aesthetic Durability The Ninja 500 license plate bracket features an inverted triangle design, crafted from high-quality metal and treated with anodized black powder coating, which offers properties of anti-oxidation, anti-corrosion, and scratch resistance. It not only enhances the aesthetic appeal of the motorcycle but also withstands the test of time and environmental conditions, ensuring long-term use. Performance Enhancements Installing a Ninja 500 Z500 license plate holder can reduce the rear weight of your motorcycle, leading to improved handling and balance due to the lighter design compared to stock fenders. Easy to Install Package Kit Plug and play, easy to install, can refer to the installation video on the listing. Package includes 1PCS Ninja 500 Z500 fender eliminator 2 PCS aluminum column1 copy of installation manual.

New Rage Cycles hits the market with a custom designed fender eliminator kit..

FITMENT The fender eliminator with the extension spacer can be suitable for most models. But not compatible with 2015 CBR300R,CBR600RR, CBR500R, CB500F, Monkey, 2011-current GSXR 600, 2011-current GSXR 750, 2022 GSXS, 2013-2019 Ninjia 300, 2021 Ninjia 400, 2021 Ninjia ZX6R,, Z900, 2012 2018 YZF-R1, 2020 YZF-R6, 2019 Xmax, MT-03. Please check the license plate bracket dimension image before purchasing. EXTENDABLE The range of the mounting hole is 30 to 210mm. The included extension spacer allows the mounting holes to be extended to 210mm, which can be used for a wider range of models. ADJUSTABLE 90 degree foldable for adjustment, the installation position of the motorcycle universal fender eliminator can be moved up and down, you could choose a suitable installation position to fit the different sizes of license plates. MATERIAL Made of 6063-T6 aluminum alloy, with high-quality anodized aluminum surface treatment, the motorcycle fender eliminator is not easy to corrode and oxidized by foreign objects. PACKAGE INCLUDES One Motorcycle license plate bracket, two Mounting screws, three Installation tools, and one License plate LED light.

Fitment Custom Fender Eliminator for Ninja 650 Z650 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026. Before placing an order, please confirm if the tail tidy is fit for your motorcycle. Material This plate holder is made of stainless steel, not easy to break, long-term use without deformation. Solid and sturdy.. Function It makes the lines at the rear of the motorcycle look smoother and enhances its aesthetic appeal. It can also serve as a mudguard to help motorcycles stay away from mud and sewage. The bracket kit is incorporated a license plate light, which can highlight the license plate during nighttime driving without the need for a separate purchase.. Installation Easy to install, fits perfectly and harmoniously to your model. Aftermarket replacement part. Quantity Package included 1 piece License Plate Mount for Ninja 650 Z650, comes with all necessary mounting hardware..

Material Fender Eliminator- Made of CNC Aluminum, adjustable license plate holder,laser cutting,treated with oxidized surface.. Suitabled Fender eliminator kit plate holder universial Replacement for Yamaha Kawasaki Honda Ducati Suzuki.. Packaged1 license plate light fender eliminator 1 necessary install hardware, instruction is not included,the fender eliminator light need to manually connect the cables.. FunctionLicense plate bracket holder protects against the splashing of water and the tires and engines of your motorcycle during using, keeping the motorcycle clean even on wet roads.. ConfirmedFor detailed license plate mount compatibility information, please see the following descriptionand please confirm with the model and year of your motorcycle from the following description ..

Material Motorcycle license plate holder is made of aluminum alloy , anodized coating, corrosion and wear resistance, rust-proof, sturdy and reliable, will has a long service life. Fitment Motorcycle tail tidy universal fits for most of motorcycle motorcross, replacement for Yamaha Suzuki Honda Bmw Kawasaki Victory and most other models with through hole license plate mounting systems. NOTE It is not specific designed for any bike. Some modifications may be needed during installation. Stylish motorcycle fender eliminator kit, enhances the looks of your motorcycle. Package Included 1 set Motorcycle license plate bracket with light.

UNIVERSAL LICENSE PLATE BRACKET Compatible with ninja 300 400 650 Z125 Z900 ZX10R Z400 Z650, Z750, Z800, Z1000, Z750R ER6N, ZX6R ZX10R XSR900 XSR700 FZ07 CB300R FZ6r R6 MT03 R3 MT01 MT03 MT07 MT10 YZF R7 R25 R15 R125. UNIVERSAL LICENSE PLATE HOLDER Compatible with S1000RR R1200GS F800GS F700GS S1000R S1000XR HP4Race K16000B F800GT K1600GT K1600GTL R1200RT K1200RS CBR 125R 150R 250R 250RR gsx250r GSXR 1000 SV650 GSX-S1000. NOTE Fender eliminator kit does not compatible with Ninja 1000 YZF-R1 2020 cbr500rr 2011- current gsxr 600750 cbr600rr cb300r yzf600r z125 2020 zx6r.Please confirm the size of your license plate mount before purchasing. MATERIAL T6061-T6 aluminum, durable anodized finish surface, corrosion and wear resistance.COLOR BlueRed TitaniumGreenGoldOrange. Easy to install. PACKAGE INCLUDE 1 set Fender eliminator kit with license plate light and installation hardware.. FENDER ELIMINATORS FEATURES 1.Mounting hole adjustable 30115mm 2. Horizontal angle adjustable get a better view of the road 3.Length adjustable avoid scratching rear seat. 4. The installation position of the license plate is adjustable can be moved up and down to fit for different sizes of license plate..

FITMENT - This motorcycle license plate mount fits a wide range of models including Z400, Z650, Z750, Z800, Z900, Z750R, ER6N, ZX10R CBR series 125R, 150R, 250R, 250RR, 400, 1000F, 1100R, 1100XX MT01, MT03, MT07, MT10 YZF series R3, R6, R7, R25, R15, R125, 600R T-max 500 and 530 FZ series FZ1, FZ6, FZ8, FZS series 1000, 600, and more.. Expandable Design - The mounting hole range is adjustable from 30mm to 116mm. An included extension spacer allows the mount to accommodate wider models with up to 116mm spacing.. Adjustability - The mount features a 90-degree foldable design, enabling vertical adjustments. You can move the license plate up or down to find the optimal position for different plate sizes.. Material - Made from high-quality 6063-T6 aluminum alloy with anodized surface treatment, the license plate bracket is resistant to corrosion and oxidation, ensuring durability against external elements.. Package Includes - 1x motorcycle license plate bracket, 2x mounting screws, 3 x installation tools, 1x license plate LED light for easy setup..

Fender eliminator kit fit for Kawasaki Ninja 400 Z400 2018-2024, for Kawasaki Ninja 250 2018 2019. Please refer to the compatible list, and check the year and model of your motorcycle before purchasing it. Our motorcycle fender eliminator is made of high quality metal, durable and not easy to damage. The surface is black powder coated to prevent rust and corrosion. Motorcycle license plate holder has an inverted triangle design at the end, which can improve the appearance of your motorcycle. The stylish and cool look can make your vehicle stand out from the crowd. License plate bracket matches the stock rear turn signals perfectly and is easy to install. Easy to install with bolts. Please refer to the installation video before installation. Package include 1 PCS license plate bracket2 PCS aluminum column1 copy of installation manual. If you receive a damaged, unsatisfied product, or have questions during installation, please contact us via Amazon email.

Fender eliminator kit fit for Kawasaki Ninja 500 2024-up Please refer to the compatible list, and check the year and model of your motorcycle before purchasing it. VEISUTOR motorcycle fender eliminator is made of high quality metal with a black powder coated surface that won't oxidize and scratch, and the tail license plate frame can organize your motorcycle well and can improve the appearance of your motorcycle. License plate holder is a perfect fit for your motorcycle, it works with stock, aftermarket and even homemade turn signals and does not come off easily in bumpy conditions.. Installing a fender eliminator on these motorcycles also offers certain performance benefits. By reducing the weight of the rear end since eliminators are usually lighter than stock fenders, it can improve the handling and balance of the motorcycle. Package include 1 PCS license plate bracket1 set mount hardware1 copy of installation manual. If you receive a damaged, unsatisfied product, or have questions during installation, please contact us via Amazon email.

FITMENT The adjustable range of the mounting hole is 30-115mm. Does NOT COMPATIBLE WITH Z1000, YZF-R1, 2020 CBR500RR, 2011- Current GSXR 600750, CBR600RR, CB300R, YZF600R, Z125, 2020 ZX6R, 2015 CBR300R, CBR600RR, CBR500R, CB500F, Monkey, 2011-Current GSXR 600, 2011-Current GSXR 750, 2022 GSXS, 2013-2019 Ninjia 300, 2021 Ninjia 400, 2021-Current Ninja 1000, 2021 Ninjia ZX6R, Z900, 2012 2018 YZF-R1, 2020 YZF-R6, 2019 Xmax, MT-03. NEED TO BE MODIFIED 2016 YZF - R3, 2017-2020FZ09, 2017-2020 Duke 390, 2021 Duke 690, CRF 300L, Africa twin adv sport, VTX 1800C.I, 2021 TNT 135, 2014 Monster 796. NEED TO BUY SCREWS AND BOLTS 2016 Ninja 650R2016 ZX 10R.. THREE ADJUSTABLE FUNCTIONS The motorcycle License Plate Bracket offers adjustable horizontal angle for optimal road view, a length adjustment to avoid exhaust or seat scratches, and an up-down position shift to fit various license plate sizes.. CLEARLY ILLUMINATE This fender eliminator kit comes with a license plate LED light. No need to buy separately. It can highlight the license plate in the night of driving. MULTIPLE MATCHING Motorcycle license plate mount for Z400 Z650 Z750 Z800 Z900 Z750R ER6N ZX10R For CBR 125R 150R 250R 250RR 400 1000F 1100R 1100XX MT01 MT03 MT07 MT10 YZF R3 R6 R7 R25 R15 R125 600R, T-max 500 T-max 530 FZ1 FZ6 FZ8 FZS1000 FZS600. WARM TIPS As for other models not shown on the list, you can check clearly before making a purchase.

Manufacturing high-quality performance products specializing in high-quality parts and accessories. Whether you're tackling a DIY project or seeking professional-grade components, we're here to meet your needs.. Precision manufactured for a perfect fit. Follow the manufacturer's specifications for safe usage. Fender Eliminator.

Manufacturing high-quality performance products specializing in high-quality parts and accessories. Whether you're tackling a DIY project or seeking professional-grade components, we're here to meet your needs.. Precision manufactured for a perfect fit. Follow the manufacturer's specifications for safe usage. Fender Eliminator.

FOR USE OF STOCK OEM TURN SIGNALS AND PLATE LIGHT. DMP brings the motorcycle enthusiast a new line of fender eliminator kits for modern sportbikes. DMP fender eliminators are based on the philosophy that motorcycle riders should be provided with high quality components at reasonable prices.. Each fender eliminator kit is precision laser cut from high grade steel to ensure strength under stress and precise fitment. Each component is treated with a durable powder coat finish to resist corrosion and weathering. High quality lock nuts and bolts make sure that the DMP Fender Eliminator kit remains intact even at high speeds.. Each DMP Fender Eliminator kit mounts to the stock location. No body modifications or drilling is necessary..

LED Marker Lights and Plate Lights Not Included . DMP brings the motorcycle enthusiast a new line of fender eliminator kits for modern sportbikes. DMP fender eliminators are based on the philosophy that motorcycle riders should be provided with high quality components at reasonable prices.. Each fender eliminator kit is precision laser cut from high grade steel to ensure strength under stress and precise fitment. Each component is treated with a durable powder coat finish to resist corrosion and weathering. High quality lock nuts and bolts make sure that the DMP Fender Eliminator kit remains intact even at high speeds.. Every fender eliminator has license plate mounts that offer secure fitment for several different size license plates. The DMP plate bracket has inconspicuous 10MM mounting points for most common aftermarket turn signals and 6 to 8MM plate lights. Each DMP Fender Eliminator kit mounts to the stock location. No body modifications or drilling is necessary.. Well written instructions with color photos make installing each unit fast and easy. Full customer support and technical service is available..

Manufacturing high-quality performance products specializing in high-quality parts and accessories. Whether you're tackling a DIY project or seeking professional-grade components, we're here to meet your needs.. Precision manufactured for a perfect fit. Follow the manufacturer's specifications for safe usage. Fender Eliminator.

FITMENT - The fender eliminator fits with KAWASAKI 2018-2023 Z400 Ninja 4002018-2021 Ninja 250ninja 500 z500 2024.. Please pay attention to the model year before purchasing, Only applicable to models after 18 years, not applicable to models before 18 years.. The Ninja Z400 fender eliminator is made of aluminum alloy which has the advantage of being very light and rigid.. Package Ninja 400 Fender eliminator comes with 4 nuts, screws and washers, 2 rubber plugs.. Worry-free after-sale service. If you have any installation problems, you can contact us in time..

FITMENT - The fender eliminator is fit with Ninja 650 Z650 EX650 ABS 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026. FEATURE - 2025 Z650 fender eliminator is fit with OEM and aftermarket turn signals. No modification required.. REINFORCED WELDING - Add welds on the back of the 2025 Ninja 650 fender eliminator. Avoid vibration and noise during driving.. NEAT APPEARANCE - The size of the Ninja 650 license plate bracket is 73.5 inches. Looks more concise than the factory license plate bracket.. PACKAGE - 2026 Ninja 650 fender eliminator comes with 1 rubber grommet, 4 nuts and screws and washers, 2 rubber plugs..

Condition100 Brand New. MaterialDurable Nylon Plastic. FitmentFor Kawasaki Vulcan S EN650.

FITMENT This fender eliminator is compatible with Ninja 400 20182023, Ninja 250 20182023, Ninja 500 20182025, including the Z500 eliminator version and its matching components.. FEATURE Ninja 500 fender eliminator is compatible with OEM and aftermarket turn signals.. DURABILITY The Ninja license plate bracket is anodized for improved corrosion resistance and strength.. EASE OF INSTALLATION The Ninja 400 fender eliminator comes with a complete set of hardware for a plugandplay install.. PACKAGE The eliminator kit includes 1 rubber grommet, 4 nuts and screws with washers, and 2 rubber plugs..

FITMENT Compatible With CBR 300 500 125R 150R 250R 300R 500R 250RR 400 600F 600RR 1000F 1100R 1100XX Compatible with MT01 MT07 MT09 MT10 YZF R1 R6 R7 R25 R15 R125 600R, T-max 500 T-max 530 FZ1 FZ6 FZ8 FZS1000 FZS600 Compatible with Z400, Z650, Z750, Z800, Z1000, Z750R ER6N, ZX6R ZX10R, Ninja 300 400 Please use lock-tite to prevent the license plate holder from vibrating or loose. FITMENT Compatible With S1000RR, R1200GS, F800GS, F700GS, S1000R, S1000XR, HP4Race, K16000B, F800GT, K1600GT, K1600GTL, R1200RT, K1200RS Compatible with SUZUKI GSXR 600 750 1000 SV650 GSX-S1000 Compatible with Monster 821 Stripe Dark 1200 S Stripe 1100S 1100 EVO S2R 1000 S4R S S 695 S2R 800 S4R S S4R NOTICE not for gsxr600 2019, cb300r, yzf600r, z125, 2020 zx6r. MATERIAL Made of 6063-T6 aluminum alloy, with high-quality anodized aluminum surface treatment, the motorcycle fender eliminator is not easy to corrode and oxidized by foreign objects. ADJUSTABLE The license plate holder can be folded 90 degree to adjust to a different horizontal angle from the ground. It can be extended up to 110 mm about 4.3 inches to avoid scratching the exhaust pipe or rear seat. The mounting position can be moved up and down to choose the right mounting position to fit different sizes of license plate holders. PACKAGE One Motorcycle license plate, two mounting screws, three Installation tools, one LED light, and two Turn signals.

Manufacturing high-quality performance products specializing in high-quality parts and accessories. Whether you're tackling a DIY project or seeking professional-grade components, we're here to meet your needs.. Precision manufactured for a perfect fit. Follow the manufacturer's specifications for safe usage. Fender Eliminator.

Clean up the back end of your bike with an NRC designed fender eliminator kit.

The AVT Ninja 650 z650 Fender Eliminator Kit is designed from the ground up to dramatically improve the appearance of your Ninja 650 z650s tail as simply as possible.. The kit includes everything you need to completely replace your stock tail light fender with a integrated turn signal tail light and LED lighted license plate bracket. Precision laser cut out of aircraft grade aluminum and Powder Coated. Made IN THE USA.

The AVT Ninja 650 z650 FLUSH NI Fender Eliminator Kit is designed from the ground up to dramatically improve the appearance of your Ninja 650s tail and install as simply as possible.. The kit includes everything you need to completely replace your stock fender and turn signals with Super Bright LED turn signals and LED lighted license plate bracket. Precision laser cut out of aircraft grade aluminum and Powder Coated. Made IN THE USA.

The AVT Ninja 650 ER-6N NI Fender Eliminator Kit is designed from the ground up to dramatically improve the appearance of your Ninja 650s tail and install as simply as possible.. The kit includes everything you need to completely replace your stock fender and turn signals with Super Bright LED turn signals and LED lighted license plate bracket. Precision laser cut out of aircraft grade aluminum and Powder Coated. Made IN THE USA.

Direct bolt-on - zero modifications. All wiring and stainless hardware included. Includes plug and play white LED plate light. Precision CNC laser cut 304 stainess steel and powder coated matte textured black.

Direct bolt-on - zero modifications. All wiring and stainless hardware included. Includes plug and play white LED plate light. Precision CNC laser cut 304 stainless steel and powder coated matte textured black.

Direct bolt-on - zero modifications. All wiring and stainless hardware included. Includes plug and play white LED plate light. Precision CNC laser cut 304 stainless steel and powder coated matte textured black.

FITMENTCompatible with Kawasaki Ninja 650 2017-2020 Compatible with Kawasaki Z650 2017 2018 Please make sure this product is suitable for your motorcycle before ordering. MATERIALMade of aluminum, it is durable and difficult to deform even under the pressure of external force.. INSTALLATIONThe license plate frame is easy to install and does not require any instructions. Just twist the screws to complete the installation process without any modification.. FUNCTION100 brand new aftermarket, which can directly replace the original license plate frame, and the product is cost-effective.. SERVICEYou can enjoy comprehensive services, logistics inquiry, pre-sales and after-sales service in our shop. If you have any questions, please contact us without hesitation..

Fitment Fit for Z650 ABS Ninja650 ABS 2017 - 2023 Ninja 650 KRT ABS 2022-2023. Compatible with Stock Turn Signals and Aftermarket Blinkers10mm. Material 5083-H112 Aluminum Alloy, Light Weight, with 3.0mm Thickness Aluminum Construction and Durable Black Powder Coating. All 304 Stainless Steel Hardware Included, Easy installation. Not Include LED License Plate Light, Compatible with OEM One.