Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor2-phase hybrid stepper motors Outer diameter 57, 60,86mm.. This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor 57,60,86 type 2-phase 4-wire, 6-wire, 8-wire. Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise. Package 1piece DM556 driver. PLEASE NOTE if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you..

FULLY FUNCTIONAL Our high torque stepper motor is a Nema23 57x57mm, all-in-one integrated CAN interface smart servo step motor that comes with an encoder, motor driver and motion controller, in an aluminum alloy case. Using the CANBUS protocol, multiple motors can communicate simultaneously to achieve complex motion control.. POWERFUL TECHNICAL SUPPORT This Nema 23 stepper motor incorporate robust DSP core and fault tolerance, fail safe user interface, along with free debugcontrol software and complete SDK, lib, dll and C, C example codes.. HIGH TORQUE Holding Torque 1.26 N.m, 1-128 micro-stepping, 24-48 VDC supply voltage and 1-2.8 Amp adjustable current. Running with no vibrationnoise and high torque, good substitution of ACDC servo motor at low speed.. EXCELLENT DESIGN Closed-loop motion, high positioning accuracy, fast response, and high speed to 2000 rpm. Supports speed control mode, position control mode, backlash compensation, stall detection, and many other control functions.. LOW NOISE This arduino stepper motor comes with 3 inputs, 1 output and 3 trigger modes to suppress electrical noise. 11 actions can be attached to each input level change. All inputs can generate notifications when triggered..

Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor2-phase hybrid stepper motors Outer diameter 42, 57,86mm.. Package 1piece DM542. More informations, please refer to the last photo in this link.. This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor 42,57,86 type 2-phase 4-phase 4-wire, 6-wire, 8-wire. PLEASE NOTE if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you..

Controller Driver Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time. Forward Reverse It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application. 4 Control Mode In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands. 9 work states Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.ForwardReverseDelayLoopSelf-lockingNo-lockRotating speed and so on. HD LCD display The HD LCD can clearly display the speeddelaycycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost.

2.2 Nm Strong Torque Performance This NEMA 23 stepper motor kit delivers powerful performance with high torque, ensuring reliable, precise and smooth movement during engraving and cutting for woodworking. The torque is 2.2 Nm, a 400 increase over the original NEMA 17 stepper motor.. DM542 Driver Controller Four independent motor drivers ensure more stable and quieter machine operation. NEMA 23 stepper motor kit is equipped with a compact control box that is easy to use and maintain.. Faster and High Precision Achieve precise positioning and excellent repeatability with this NEMA 23 stepper motor. The max moving speed is 8000mmmin, which make your CNC engraving machine running quickly and improve your working efficiency.. Versatile Compatibility The NEMA 23 motor kit is designed for FoxAlien Masuter 3 and Masuter Pro. Please note that Masuter Pro requires new aluminum panels sold separately.. Convenient Setup NEMA 23 stepper motor kit includes the instruction manual for easy installation. Get your CNC carving or engraving machine quickly set up and start your project without additional complicated wiring..

Professional CNC Controller Kit This is a professional 3d printer DIY kit made of high premium materials. The complete kit includes motor, driver, and power supply. Ideal for DIY projects, small workshops, and light industrial automation.. 3 Pcs Nema23 57mm Stepper Motor 1.2Nm120Ncm 170oz.in holding torque, nema23 step motor size 2.24 x2.24 x2.21 inch57x57x56 mm. Current 3A 1.8 deg. step angle200 stepsrev, 2 phase 4-lead wires shaft diameter 8mm D shaft 7.5mm .. 3 DM556 Step Motor Drive DM556 driver voltage DC 20V-50V, with 8-step adjustable output current, suitable for all two-phase hybrid stepper motors with currents less than 5.6A. Offers 15 microstep modes with multi-step resolution adjustment from 400 to 25600.. Stable output 350W 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range 100V or 240V AC selected by switch to choose input voltage.. Plug-and-Play Works seamlessly with CNC. Comes with a Mach3 control cardnot required if not needed, controlled by computer software, supporting up to 5-axis simultaneous control. Strong anti-interference capability and high reliability..

This driver is an upgraded version of TB6600 and with plastic cover.. The subdivision is increased to 32 subdivision, which is suitable for high subdivision.. Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.. Suitable for step motorNEMA17,23 42, 57 type 2 phase 4 phase 4 6 8 wires. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices..

Torque283oz.in2.0Nm Body size2.242.242.99inch. 2 Phase 4-Lead with 80cm Cable for 3D Printer STEP ANGLE 1.8STEP. WORKING VOLTAGE 24V. CURRENT 3.0APHASE INDUCTANCE4.2 mHPHASE. RESISTANCE1.15 PHASE INSULATION CLASSB.

Package include iMetrx Nema 17 Stepper Motor 42x23mm x5pcs, 1Meter Wiring x5pcs. iMetrx Nema 17 Stepper Motor has high torgue and stronger power 20-25 higher than normal motors and a lower resistance value to reduce heating.. iMetrx 3D printer motor has a stable internal structure which enabled the stepper motor to provide low noise.. 2 Phase, 1.8 Degrees, Compatible with all FDM 3D printer that need 42x23mm extruder motor.. iMetrx stepper motor have durable bearing for long time use..

This mounting bracket is manufactured by integral forming of 3mm steel plate and welds fixed bar on each side of the holder, strong and tough. strong mounting and easy to install. Mounting Holes The distance from the center of the hole to the ground is 39mm, all slotted and holes openings are made of high-precision punch press once stamping, ensureing that absolutely the dimensions are absolutely accurate and precise, and with the motor fit tightly.. Our motor fixed seat adopts advanced anti-rust paint technique, Durable with alloy steel material,which makes the bracket be used for a long-term. All slot hole for high precision punch a punching processing,perfect fit for your 57mm Nema 23 Stepper Motor. Package Included 4pcs mounting bracket, 16pcs M4 mounting screws.

57-56 nema 23 stepper motor, motor size 22.4x22.4x22. Come with 80CM 31.49 Cable. High torque -Holding torque up to 1.2Nm. Rate Voltage 5.2V DC. Rated Current 2.0 A. Widely works for Most 3D Printer CNC Machine and Robotics.

Package 1PCS. Specification1.2Nm175oz.in holding torqueCurrent3A,Step angle1.8phase2Resistance0.9510inductance2.820mH. Size Frame Size 57 x 57mm ,Body Length 56mm ,Shaft Diameter 8mm , Shaft Length 21mm. Connection RedA, GreenA-, YellowB, BlueB-. Warning Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor..

All-in-One Stepper Motor Controller Driver This integrated control module combines both driver and controller functions for unipolar two-phase, 4-wire stepper motors. It has multiple built-in operation modes, allowing users to quickly select optimal motion trajectories. It features power-off memory for storing distancespeeddelaycycle count settings. The module can operate either as a standalone unit or integrate with other systems, making it suitable for various industrial control applications.. Intuitive HD LCD Display Our high-resolution display provides real-time monitoring of speed, delay, and cycle parameters for effortless adjustment. The intuitive interface enables precise motor control while the TTL serial port ensures compatibility with industrial PLCs and PCs. Expandable control interfaces allow direct integration with robotic arms, CNC equipment, 3D printer and automated production systems.. High-Power 6.6A Industrial Drive Supports 425786 series stepper motors with powerful 6.6A output, ideal for CNC machines, automated production lines, 3D printer and logistics equipment. Wide 10-30V DC input voltage adapts to complex factory power environments. Suitable for Nema 172334 Stepper Motors.. Forward Reverse It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application. It's suitable for small mechanical equipment applications industrial automation control motor modular application.. 15 Working Modes Built-in 15 fixed operating modes, and you can quickly select the appropriate motion track to meet the needs of different scenarios, such as follow modeJog Controlcycle according to the set distance, reverse direction after reaching the limit, reverse cycle according to the set time, etc..

SpecificationHybrid Stepper1.8 degree 1.8Nm270oz-in 1ohms 3A3.5mH-201KHz57 x 57 x 76 mm,4-Lead WireFront shaft is 8mm diameter and 21mm lenth,back shaft is 6.35mm dia and 10mm length,Step angle accuracy - 5full step,not load,Resistance accuracy - 10,Inductance accuracy - 20,Temperature rise 80deg Maxrated current,2 phase on,Ambient temperature 20deg-50deg. Excellent MaterialThe 23HS8430B Nema23 stepper motor casing is made of sturdy and durable metal The internal coil adopts pure copper enameled wire to ensure that long-term operation will not cause excessive engine temperature High quality motor steel plate, with small self inductance reactance and fast response of bearings, can be directly connected to loads for low-speed operation without the need for gear reduction, and has a longer service life. Low noiseThe perfect combination of rubber and rotor makes the internal structure more stable with low noise. This reduces the vibration and noise during engine operation. Widely applicationThe Nema23 Stepper Motor is widely used in engraving machine, printer, medical equipment,embroidery machine, stage lighting, textile automation, printing,packaging and other industries automation equipment. Package include1PC 23HS8430B Nema23 Stepper Motor Dual shaft 76mm, 270oz-in,3A.

23HS8430B Motor ParameterPhase 2 Phase Step Angle 1.8 degree Frame Size 57x57x76mm Shaft Diameter 8mm Holding Torque 180N.cm 270Oz-in Phase Resistance 1ohms Rated Currentphase 3A Inductance 3.5mH-201KHz.. Excellent PerformanceIt has high torque, the stepper motor's power is 15-20 higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.. Advanced TechnologyThe motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.. High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.. Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction..

Motor and TB6600 Driver wiringStepper motor's RED wire connects to driver's A port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B port. Stepper motor's BLUE wire connects to driver's B- port.. Control Card and TB6600 Driver wiring X-axis as an example Driver's Pul connects to control card's XP pin , Driver's DIR connects to control card's XD pin , Driver's PUL- pin and DIR- connection to USB Mach3 control card's GND .. Low NoiseHigh Torque Hybrid Stepper Motor23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in 180N.cm18kg-cm. The motor runs quietly and doesn't cause the generator to become too hot over a long time.. Support Forward and Reverse Control Stepper Motor Driver4257 TB6600 stepper motor driver with input voltage anti-reverse connection and overheatovercurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions 1, 2 A, 2 B, 4, 8, 16, 32 and 8 subdivisions 0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A current control.. USB Interface, Drive-free Design 4-Axis Linkage Control CardOutput pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.. Multi-function control cardWith support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control PWM mode and Him electrical mode, handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.. Stable output 24V DC power supplyOver-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance..

23HS9430 Motor ParameterPhase 2 Phase Step Angle 1.8 degree Frame Size 56 x 56 x 81 mm Shaft Diameter 8mm Holding Torque 2.1Nm 308oz.in Rated Currentphase 3A.. Excellent PerformanceIt has high torque, the stepper motor's power is 15-20 higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.. Advanced TechnologyThe motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.. High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.. Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.. How to wiring the 4-lead wire Stepper motor's Red wire connects to driver's A port Stepper motor's GREEN wire connects to driver's A- port Stepper motor's YELLOW wire connect to driver's B port Stepper motor's BLUE wire connect to driver's B- port..

Motor and TB6600 Driver wiringStepper motor's RED wire connects to driver's A port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B port. Stepper motor's BLUE wire connects to driver's B- port.. Control Card and TB6600 Driver wiring X-axis as an example Driver's Pul connects to control card's XP pin , Driver's DIR connects to control card's XD pin , Driver's PUL- pin and DIR- connection to USB Mach3 control card's GND .. Low NoiseHigh Torque Hybrid Stepper Motor23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in 180N.cm18kg-cm. The motor runs quietly and doesn't cause the generator to become too hot over a long time.. Support Forward and Reverse Control Stepper Motor Driver4257 TB6600 stepper motor driver with input voltage anti-reverse connection and overheatovercurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions 1, 2 A, 2 B, 4, 8, 16, 32 and 8 subdivisions 0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A current control.. USB Interface, Drive-free Design 4-Axis Linkage Control CardOutput pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.. Multi-function control cardWith support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control PWM mode and Him electrical mode, handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.. Stable output 24V DC power supplyOver-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance..

Specifications of Motor Holding Torque 2N.m Current 4.2A Peak Current 6A Phase 2 Size 57x57x76 mm Step Angle 1.8 degree Motor Lead Wire 4-wire Encoder lines 1000 Insulation ClassB Motor Weight2.4 LB. Specifications of 2HSS57 Driver 2-Phase Hybrid Stepper Servo Driver Frequency 0-200KHz Insulation resistance 500M Voltage DC 24-50V inputPulses response frequency can reach 200KHZ 16 kinds microsteps choice,highest 51200 microstepsrev. Advantages Stepper motor closed loop system,never lose step The stepper motor control has a new generation of 32-bit DSP. The vector control technology can increase the accuracy of the motor Improve motor output torque and working speed Automatic current adjustment based on load. More Functions It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely. Widely used Closed loop stepper system can be applied to all kinds small automatic equipment and instrument,such as milling machine, engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so onThis motor driver kit fits all types of machine load conditions without adjusting the gain parameters.

Dimensional data Key dimensions for Nema 23 lead screw stepper motor include the following. Body size 57x57x54.5mm 2.25x2.25x2.15in, Lead screw TR8x8 350mm, Installation hole distance 47.14mm, 4-Wire, Black A Green A- Red B Blue B- Cable 1M, Weight 762g.. Specifications Nema23 stepper motor with TR8 lead screw , Step angle 1.8dge200 stepsrev, 2 Phase Holding torque 1.1Nm 155.77ozin, Resistance 0.65, Rated current 4.2A, Inductance 2.4mH20, Rotor inertia approx 200g.cm.. Operational Safety This Nema 23 lead screw step motor with flange nut boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Temperature rise 80K MAX Insulation resistance 100M MIN Insulation classUL B 130 266F Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Notes to Remember With higher speeds, torque decreases. The ideal range for operation is 0600 RPM. Lower current results in reduced torque and temperature rise, while lower voltage reduces torque recommended 2436V DC. The Nema 23 Stepper Motor with T8 Lead Screw is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks.. Precision-Built for Higher Output Generate up to 20 stronger holding torque compared to standard units with this Nema 23 Stepper Motor with T8 Lead Screw. Its robust steel core construction and specialized winding design minimize operational noise, enabling quieter and more efficient machinery..

Nema 23 Stepper Motor, great for 3D printer and CNC.. Each phase draws current 2.8A, allowing for a holding torque of 1.26Nm178.5oz.in.. 30cm lead wire, 2-phase 4-wire, available for rotation of forward and reverse.. With 1.8 step angle 200 stepsrevolution. Precisely machined full metal body, size 57mm57mm56mm..

Dimensional details The physical dimensions of a Nema 23 Stepper Motor are summarized below. Body size 57x57x54.4mm2.25x2.25x2.15in, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, Installation hole distance 47mm, with Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 717g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Resistance 0.5, Rated current 4.2A, Inductance 1.2mH20, Rotor inertia approx 300g.cm.. Safety This Nema23 Step Motor operates safely and reliably. Here are its key safety parameters Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F Temperature rise 80K MAX.. Unlock Machine Capability Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Information Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. Used in 3D printers, DIY robots, CNC machines, and other systems, the Nema 23 Stepper Motor's compact size and high torque make it suitable for tough applications..

Dimensional data Key dimensions for Nema 23 Stepper Motor include the following. Body size 57x57x75.4mm2.25x2.25x2.97in, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47mm, with Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 1082g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 2Nm 283.22ozin, Resistance 0.6, Rated current 4.2A, Inductance 1.8mH20, Rotor inertia approx 495g.cm.. Safety Data This Nema23 Step Motor ensures safe and reliable performance, and here are its key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F.. Smooth, Powerful Drive Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Points to Remember Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is widely used in 3D printers, DIY robots, CNC machines, and more. Its compact design and high torque make it ideal for tough applications..

Size Specifications Nema 23 Stepper Motor dimensional parameters are as follows. Body size 57x57x40.4mm2.25x2.25x1.6in, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, Installation hole distance 47mm, incl. Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 477g.. Performance Data Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Resistance 1.6, Rated current 2.0A, Rotor inertia approx 135g.cm, Inductance 3.5mH20.. Safety Specifications The safe and reliable operation of this 57mm Step Motor is supported by these key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity Temperature rise 80K MAX.. More Power, Less Noise Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Points Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. Widely used in 3D printers, DIY robots, CNC machines, and other automated systems, the Nema 23 Stepper Motor offers compact size and high torque for tough tasks..

Specifications Nema 23 Stepper Motor has the following various dimensional parameters. Body size 57x57x40.4mm2.25x2.25x1.6in, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47mm, Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 488g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Rated current 2.0A, Resistance 1.6, Inductance 3.5mH20, Rotor inertia approx 135g.cm.. Safety Operating safely and reliably, this Nema 23 Step motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX.. Smarter Core Design Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Considerations Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is used in various applications like 3D printers, DIY robots, and CNC machines, offering a compact design and high torque for demanding tasks..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x54.4mm2.25x2.25x2.15in, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47mm, incl. Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 724g.. Performance Data Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Resistance 0.5, Rated current 4.2A, Rotor inertia approx 300g.cm, Inductance 1.2mH20.. Safety Compliance Operating safely and reliably, this Nema 23 Stepper motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature 15RH95RH-20 50 -4F122F Operation ambient humidity Temperature rise 80K MAX.. Exceptionally Quiet Powerhouse Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Things to Note Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. In 3D printers, DIY robots, and CNC machines, the Nema 23 Stepper Motor's compact size and high torque are perfect for a variety of demanding applications..

Size Specifications Dual Shaft Nema 23 stepper motor dimensional parameters are as follows. Body size 57x57x81.4mm 2.25x2.25x3.21in, Shaft diameter 6.35mm, Front shaft length 21mm, Front shaft D-cut length 21mm, Rear shaft length 15mm, Rear shaft D-cut length 15mm, Installation hole distance 47.14mm, Weight 235, 8-Lead Cable 1M.. Performance Data Nema 23 Dual Shaft Stepper Motor 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque unipolar 2Nm 283.22ozin , Holding torque series bipolar 2.8Nm 396.51ozin , Holding torque parallel bipolar 2.8Nm 396.51ozin , Rated current 2.1A, Resistance 1.2, Inductance 2.7mH20, Rotor inertia approx 565g.cm.. Operational Safety Operating safely and reliably, this Nema 23 double shaft stepper motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Significant Torque Upgrade Engineered for minimal noise interference, our enhanced Nema 23 Dual Shaft Stepper Motor boasts up to 20 greater holding torque through its higher-grade steel core construction and optimized winding technique. Experience smoother machine cycles with less surrounding disruption.. Notes to Remember Increasing speed lowers torque, with the recommended speed range of 0600 RPM. Lower current decreases both torque and temperature rise, and reduced voltage results in lower torque 2436V DC range. The Nema 23 Dual Shaft Stepper Motor is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks..

Specifications Nema 23 closed loop stepper motor kit with stepper driver has the following various dimensional parameters. Body size 57x57x109.4mm 2.25x2.25x4.31in, Shaft length 21mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47.14mm, Motor lead color Black A Green A- Red B Blue B- incl. Cable 3M, Weight 1995g.. Performance Data Nema 23 Closed Loop Stepper Moto with driver kit, Step angle 1.8 Degree200 stepsrev, 2 Phase Holding torque 3.5Nm 495.64ozin, Resistance 1.2, Rated current 4.2A, Inductance 4.0mH20, Rotor inertia approx 850g.cm.. Safety This Nema 23 Step motor with closed-loop controller kit ensures safe and reliable performance, and here are its key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Elevate Your Equipment Our upgraded Nema 23 Closed Loop Stepper Motor Kit with Closed Loop Stepper Controller provides up to 20 higher holding torque. The refined steel core and advanced winding configuration promote efficient, smooth-running mechanics with substantially reduced operational noise for a cleaner working environment.. Important Notes Increasing speed lowers torque, with the recommended speed range of 01800 RPM for closed-loop. Lower current decreases both torque and temperature rise, and reduced voltage results in lower torque 2436V DC range. The Nema 23 Closed Loop Stepper Motor Kit with Closed Loop Stepper Driver is used in 3D printers, DIY robots, CNC machines, and other automated systems. Its compact size and high torque suit demanding applications..

Specifications Nema 23 closed-loop stepper motor with integrated driver has the following various dimensional parameters. Body size 57x57x129mm 2.25x2.25x5.08in, Shaft length 21mm, Shaft diameter 8mm, D-cut length 15mm, Installation hole distance 47.14mm, Black A Green A- Red B Blue B-, incl. Cable 0.3M, Weight 1699g.. Characteristics Nema 23 Closed Loop Stepper Motor with built-in driver, 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque 3Nm 424.84ozin, Resistance 0.70, Rated current 4.2A, Rotor inertia approx 290g.cm, Inductance 2.4mH20.. Safety Compliance With safe and reliable operation, this Nema 23 Step motor with integrated closed-loop controller features the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Unlock Machine Capability Offering up to 20 more holding torque than typical Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Controller, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Notes to Remember Increased speed reduces torque, with closed-loop at up to 1800 RPM. A lower current leads to lower torque and temperature rise, and reduced voltage results in lower torque recommended range 2436V DC. The Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Driver is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks..

Specifications Dimensional parameters of Nema 23 closed-loop stepper motor with integrated driver are as follows. Body size 57x57x73mm 2.25x2.25x2.88in, Shaft length 20.5mm, Shaft diameter 8mm, D-cut length 15mm, Installation hole distance 47.14mm, Black A Green A- Red B Blue B-, incl. Cable 0.3M, Weight 726g.. Characteristics Nema 23 Closed Loop Stepper Motor with built-in driver, 2 Phase, Step angle 1.8 Degree200 stepsrev, Holding torque 1.1Nm 155.77ozin, Rated current 4.0A, Resistance 0.45, Inductance 1.1mH20, Rotor inertia approx 200g.cm.. Safety Compliance Operating safely and reliably, this Nema 23 Step motor with integrated closed-loop controller comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH Temperature rise 80K MAX.. Precision-Built for Higher Output Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Controller offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Points Increased speed reduces torque, with closed-loop at up to 1800 RPM. A lower current leads to lower torque and temperature rise, and reduced voltage results in lower torque recommended range 2436V DC. Widely used in 3D printers, DIY robots, CNC machines, and other automated systems, the Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Driver offers compact size and high torque for tough tasks..

Specifications Nema 23 Stepper Motor has the following various dimensional parameters. Body size 57x57x40.4mm, 2.25x2.25x1.6in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, with Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 477g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Resistance 1.6, Rated current 2.0A, Inductance 3.5mH20, Rotor inertia approx 135g.cm.. Safety Compliance Operating safely and reliably, this Nema23 Step motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F.. Precision-Built for Higher Output Built with advanced steel cores and precisely tuned windings, this Nema 23 Step Motor generates up to 20 stronger holding torque while significantly reducing noise output. Achieve smoother machine motion and lower acoustic impact.. Important Notes Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is used in 3D printers, DIY robots, CNC machines, and other automated systems. Its compact size and high torque suit demanding applications..

Size Specifications Nema 23 Stepper Motor dimensional parameters are as follows. Body size 57x57x54.4mm, 2.25x2.25x2.15in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, with Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 724g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Resistance 0.5, Rated current 4.2A, Inductance 1.2mH20, Rotor inertia approx 300g.cm.. Operational Safety This 57 mm Stepper Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH.. Advanced Steel Construction Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Details Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. Commonly used in 3D printers, DIY robots, CNC machines, and other automated systems, the Nema 23 Stepper Motor is compact yet provides high torque for heavy-duty tasks..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x100.4mm, 2.25x2.25x3.96in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, with Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 1499g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 3Nm 424.84ozin, Resistance 0.8, Rated current 4.2A, Inductance 2.8mH20, Rotor inertia approx 750g.cm.. Safety Data This Nema 23 Stepper Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F Temperature rise 80K MAX.. Significant Torque Upgrade Offering up to 20 more holding torque than typical Nema 23 Step Motor, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Important Details As speed increases, torque decreases. Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current lowers both torque and temperature rise, and lower voltage reduces torque 2436V DC recommended. The Nema 23 Stepper Motor is perfect for 3D printers, DIY robots, CNC machines, and other automated systems, offering a compact size and high torque for demanding tasks..

Dimensional data Key dimensions for Nema 23 Stepper Motor include the following. Body size 57x57x40.4mm, 2.25x2.25x1.6in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, incl. Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 488g.. Specifications Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Resistance 1.6, Rated current 2.0A, Rotor inertia approx 135g.cm, Inductance 3.5mH20.. Operational Safety This 57 Step Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH Temperature rise 80K MAX.. Elevate Your Equipment Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Notes to Remember Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x54.4mm, 2.25x2.25x2.15in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 717g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Rated current 4.2A, Resistance 0.5, Inductance 1.2mH20, Rotor inertia approx 300g.cm.. Safety Data With safe and reliable operation, this Nema 23 Stepper Motor features the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH Insulation classUL B 130 266F Temperature rise 80K MAX.. Significant Torque Upgrade Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Details Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is perfect for 3D printers, DIY robots, CNC machines, and other automated systems, offering a compact size and high torque for demanding tasks..

Specifications Nema 23 Stepper Motor has the following various dimensional parameters. Body size 57x57x81.4mm, 2.25x2.25x3.21in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, incl. Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 1180g.. Performance Data Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 2.2Nm 311.55ozin, Resistance 0.6, Rated current 4.0A, Rotor inertia approx 565g.cm, Inductance 1.8mH20.. Safety Compliance With safe and reliable operation, this 57mm Step Motor features the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity Temperature rise 80K MAX.. Precision-Built for Higher Output Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Notes As speed increases, torque decreases. Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current lowers both torque and temperature rise, and lower voltage reduces torque 2436V DC recommended. The Nema 23 Stepper Motor is used in 3D printers, DIY robots, CNC machines, and other automated systems. Its compact size and high torque suit demanding applications..

Parameters Nema23 stepper motor with TR8 lead screw , 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque 1.1Nm 155.77ozin, Rated current 4.2A, Resistance 0.65, Inductance 2.4mH20, Rotor inertia approx 200g.cm.. Specifications Nema 23 lead screw stepper motor has the following various dimensional parameters. Body size 57x57x54.5mm 2.25x2.25x2.15in, Lead screw TR8x8 150mm, Installation hole distance 47.14mm, 4-Wire, Black A Green A- Red B Blue B- Cable 1M, Weight 708g.. Safety Compliance The safe and reliable operation of this Nema 23 lead screw step motor with flange nut is supported by these key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Advanced Steel Construction Generate up to 20 stronger holding torque compared to standard units with this Nema 23 Stepper Motor with T8 Lead Screw. Its robust steel core construction and specialized winding design minimize operational noise, enabling quieter and more efficient machinery.. Important Notes With higher speeds, torque decreases. The ideal range for operation is 0600 RPM. Lower current results in reduced torque and temperature rise, while lower voltage reduces torque recommended 2436V DC. The Nema 23 Stepper Motor with T8 Lead Screw is used in 3D printers, DIY robots, CNC machines, and other automated systems. Its compact size and high torque suit demanding applications..

Specifications Ratio 101 Planetary Gearbox for Nema 2324 Stepper Motor 8mm-31mm38mm-4.5mmF47.14mm-M4 Compatible with shaft length s ranging from 13 to 31 mm, Body length 60-74mm 2.37-2.92in, Input shaft diameter 8 mm, Input shaft length 31mm, Output shaft diameter 14 mm, Output shaft length 35 mm, Installation hole distance 47.14mm, Weight 235g.. Performance Data Nema 23 planetary gearbox, Backlash 15 arcmin, Efficiency 94, Nominal output torque 10Nm 1416.12ozin, Moment permissible torque 20Nm 2832.24ozin, Nominal input speed 3000RPM, Max. input speed 6000RPM, Radial force 400N, Axial force 230N.. Performance Durability Engineered for precision and endurance, this Nema 24 23 planetary reducer meets the following critical specifications Noise 65dB, Working temperature -20 150 -4F302F, Waterproof rating IP54, Lifetime 20000H.. Exceptional Performance this planetary gear for Nema 2324 combines high torque output with a rugged build for extended service life of up to 20,000 hours. Its low-noise design supports smooth, consistent operation in any working environment.. Application For tasks that require slower speeds but uncompromising torque, this planetary gearbox delivers. Its efficiency and control make it a top choice for robotics, other automated, and precision manufacturing..

Dimensional details The physical dimensions of a Nema 23 closed-loop stepper motor with integrated driver are summarized below. Body size 57x57x94mm 2.25x2.25x3.71in, Shaft length 21mm, Shaft diameter 8mm, D-cut length 15mm, Installation hole distance 47.14mm, Black A Green A- Red B Blue B-, Cable 0.3M, Weight 1070g.. Parameters Nema 23 Closed Loop Stepper Motor with built-in driver, 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque 1.8Nm 254.9ozin, Resistance 0.45, Rated current 4.0A, Rotor inertia approx 230g.cm, Inductance 1.4mH20.. Safety Specifications The safe and reliable operation of this Nema 23 Step motor with integrated closed-loop controller is supported by these key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient humidity 15RH95RH Operation ambient temperature -2050 -4F122F.. More Power, Less Noise Offering up to 20 more holding torque than typical Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Controller, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Important Details Increased speed reduces torque, with closed-loop at up to 1800 RPM. A lower current leads to lower torque and temperature rise, and reduced voltage results in lower torque recommended range 2436V DC. The Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Driver is perfect for 3D printers, DIY robots, CNC machines, and other automated systems, offering a compact size and high torque for demanding tasks..

FULLY FUNCTIONAL Our high torque stepper motor is a Nema23 57x57x76mm 2.242.243 inch, all-in-one integrated CAN interface smart servo step motor that comes with an encoder, motor driver, in an alloy aluminum case.. HIGH TORQUE Holding Torque 1.2 N.m. Running with no vibrationnoise and high torque, good substitution of ACDC servo motor at low speed.. EXCELLENT DESIGN Closed-loop motion, high positioning accuracy, fast response, and high speed to 1000 rpm. Supports speed control mode, position control mode, backlash compensation, stall detection, and many other control functions.. SPECIFICATIONS Type Hybrid Encoder line number 1000 Motor length 57x57x56mm 2.242.242.2 inch Shaft Diameter8mm Total length76mm3 inch Lead wire 4pcs Support DC Power SupplyDC20-48V Current4.2A.. HIGH PRECISION It is a new motor-driven integrated hybrid servo drive system with communication function.Using a new generation of 32-bit DSP control and closed-loop control, it can prevent out-of-step and ensure the accuracy of the product..

Package Includes 1 pcs high torque CNC stepper motor, with 50cm20inch XH2.54 cable, advanced magnetic circuitry and low noise.Smooth and reliable run, ensuring accurate positioning and efficient motion control. Low Noise 58.84N.cm83.3oz.in holding torque, drive voltage 24V - 60V, rated current 2A, resistance 2ohms. Size NEMA 23 bipolar 57 x 57 x 40mm2.24 x2.24 x1.57inch, 2 phase, 4 wire, shaft diameter 8mmD-Shaft 7.5mm, shaft length 21mm. Application Nema 23 Stepper Motor is used in CNC machine, milling machine, 3D printer, laser engraving, semiconductor equipment and other automation systems. Compact size and high torque make it suitable for various demanding applications. Note Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will damage the motor.

Items in Kit 3 Pcs 2Nm nema23 Closed loop stepper motor with 1000line encoder. 3 Pcs Nema 23 stepper motor driver. 1 Pc 24V 350W Power Supply and 1 Pc USB Mach3 Card. This is a complete stepper motor motion control system for professional 3d printer DIY kit.. Specifications of Nema23 Stepper Motor Holding Torque 2N.m Current 3A 2 phase 4 wire Step Angle 1.8 degree Encoder 1000 lines Inductance 2 mH Resistance 0.7 ohm Motor Length 57x57x80 mm 2.242.243.15 inch.. Parameter of Nema23 Closed Loop Stepper Motor Driver DSP Closed loop stepper drive Impulse response frequency 200KHz. Supply voltage DC 24-80Vdc, Compatible 4.528V signal continuous output current 0.5-13A. Micro-stepping driver 20025600ppr Signal input Support PULDIR and CWCCW modes difference. This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.. Stable output 24V 350W DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range 110V or 220V AC selected by switch to choose input voltage.. Functions of the Mach3 Control Board It supports 5-axis linkage control at most. Strong anti-interference and high reliability. Applications Nema 23 closed loop stepper motor kit can be applied to all kinds small and medium-sized automation equipment and instrument,such as 3D printer, CNC machine, milling machine, carving machine, special industrial sewing machine, stripping machine, marking machine, graph plotter, cnc machine, automatic assembly equipment,automation application and so on..

23HS8430 Motor ParameterPhase 2 Phase Step Angle 1.8 degree Frame Size 57x57x76mm Shaft Diameter 8mm Holding Torque 180N.cm 270Oz-in Phase Resistance 1ohms Rated Currentphase 3A Inductance 3.5mH-201KHz.. Excellent PerformanceIt has high torque, the stepper motor's power is 15-20 higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.. Advanced TechnologyThe motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.. High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.. Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x109.4mm2.25x2.25x4.31in, Shaft length 210.5mm, Shaft diameter 10mm, D-cut length 21mm, Installation hole distance 47mm, Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 1663g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 3.5Nm 495.64ozin, Rated current 4.2A, Resistance 1.0, Inductance 4.0mH20, Rotor inertia approx 850g.cm.. Safety Compliance This 57mm Stepper Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH.. Exceptionally Quiet Powerhouse Offering up to 20 more holding torque than typical Nema 23 Step Motor, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Things to Note As speed increases, torque decreases. Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current lowers both torque and temperature rise, and lower voltage reduces torque 2436V DC recommended. In 3D printers, DIY robots, and CNC machines, the Nema 23 Stepper Motor's compact size and high torque are perfect for a variety of demanding applications..

Integrated Controller Driver All-in-one stepper motor controller and driver for motor driving and real-time control of stepper motor working status. Kind reminder The user manual can be downloaded from the Technical Specifications section on the Amazon page.. Multiple Control Modes Automatic control mode, manual control mode, setting control mode, and UART control mode. For the setting control mode, it requires connecting to other stepper motor and just use this product as a standalone stepper motor controller.. Power-Off Memory Function Automatically saves and sets data such as distance, speed, delay, and cycle times to prevent data loss after power-off.. HD LCD Display Clearly and intuitively displays parameters such as forward and reverse pulse counts, forward and reverse speeds, delays, and cycle work times, facilitating browsing and setting for high-precision motor control.. Wide Application Suitable for general industrial control applications, such as CNC machine tools, mechanical packaging, electronic processing and testing, and automated assembly lines. Not suitable for special industries like medical, fire protection, or vital industrial fields..

Very Huge Torque. 3Nm425oz.in holding torque. NEMA 23 bipolar 2.24x2.24x4.45 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 4.2A resistance 0.9ohms.

Nema 23 100mm length stepper motor.. 3.0Nm 425oz.in torque.. The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router.. 8mm motor shaft..

1 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor. 1 x Nema 23 Bipolar 1.8deg 1.9Nm 269oz.in 3.0A 3.36V 57x57x76mm 4 Wires.

This CNC kit included. 1 x Nema 23 Bipolar 3Nm 425oz.in 4.2A 57x57x114mm 4 Wires CNC Stepper Motor. 1x Digital Stepper Driver 1.85.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor.

Package in 3PCS. 3Nm425oz.in holding torque. NEMA 23 bipolar 2.24x2.24x4.45 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 4.2A resistance 0.9ohms.

Package in 3PCS. 1.26Nm178.5oz.in holding torque. NEMA 23 bipolar 2.24x2.24x2.2 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 0.9ohms.

Package in 3PCS. 1.9Nm269oz.in holding torque. NEMA 23 bipolar 2.24x2.24x3.0 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 1.13ohms.

1.9Nm269oz.in holding torque. Single Shaft 6.35mm diameter. NEMA 23 bipolar 2.24x2.24x3.0 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 1.13ohms.

Higher Torque. 1.26Nm178.5oz.in holding torque. NEMA 23 bipolar 2.24x2.24x2.2 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 0.9ohms.

1.9Nm269oz.in holding torque. Single Shaft 6.35mm diameter. NEMA 23 bipolar 2.24x2.24x3.0 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 3.0 A resistance 1.12ohms.