FULLY FUNCTIONAL Our high torque stepper motor is a Nema23 57x57mm, all-in-one integrated CAN interface smart servo step motor that comes with an encoder, motor driver and motion controller, in an aluminum alloy case. Using the CANBUS protocol, multiple motors can communicate simultaneously to achieve complex motion control.. POWERFUL TECHNICAL SUPPORT This Nema 23 stepper motor incorporate robust DSP core and fault tolerance, fail safe user interface, along with free debugcontrol software and complete SDK, lib, dll and C, C example codes.. HIGH TORQUE Holding Torque 1.26 N.m, 1-128 micro-stepping, 24-48 VDC supply voltage and 1-2.8 Amp adjustable current. Running with no vibrationnoise and high torque, good substitution of ACDC servo motor at low speed.. EXCELLENT DESIGN Closed-loop motion, high positioning accuracy, fast response, and high speed to 2000 rpm. Supports speed control mode, position control mode, backlash compensation, stall detection, and many other control functions.. LOW NOISE This arduino stepper motor comes with 3 inputs, 1 output and 3 trigger modes to suppress electrical noise. 11 actions can be attached to each input level change. All inputs can generate notifications when triggered..

Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor2-phase hybrid stepper motors Outer diameter 42, 57,86mm.. Package 1piece DM542. More informations, please refer to the last photo in this link.. This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor 42,57,86 type 2-phase 4-phase 4-wire, 6-wire, 8-wire. PLEASE NOTE if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you..

Controller Driver Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time. Forward Reverse It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application. 4 Control Mode In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands. 9 work states Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.ForwardReverseDelayLoopSelf-lockingNo-lockRotating speed and so on. HD LCD display The HD LCD can clearly display the speeddelaycycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost.

2.2 Nm Strong Torque Performance This NEMA 23 stepper motor kit delivers powerful performance with high torque, ensuring reliable, precise and smooth movement during engraving and cutting for woodworking. The torque is 2.2 Nm, a 400 increase over the original NEMA 17 stepper motor.. DM542 Driver Controller Four independent motor drivers ensure more stable and quieter machine operation. NEMA 23 stepper motor kit is equipped with a compact control box that is easy to use and maintain.. Faster and High Precision Achieve precise positioning and excellent repeatability with this NEMA 23 stepper motor. The max moving speed is 8000mmmin, which make your CNC engraving machine running quickly and improve your working efficiency.. Versatile Compatibility The NEMA 23 motor kit is designed for FoxAlien Masuter 3 and Masuter Pro. Please note that Masuter Pro requires new aluminum panels sold separately.. Convenient Setup NEMA 23 stepper motor kit includes the instruction manual for easy installation. Get your CNC carving or engraving machine quickly set up and start your project without additional complicated wiring..

Professional CNC Controller Kit This is a professional 3d printer DIY kit made of high premium materials. The complete kit includes motor, driver, and power supply. Ideal for DIY projects, small workshops, and light industrial automation.. 3 Pcs Nema23 57mm Stepper Motor 1.2Nm120Ncm 170oz.in holding torque, nema23 step motor size 2.24 x2.24 x2.21 inch57x57x56 mm. Current 3A 1.8 deg. step angle200 stepsrev, 2 phase 4-lead wires shaft diameter 8mm D shaft 7.5mm .. 3 DM556 Step Motor Drive DM556 driver voltage DC 20V-50V, with 8-step adjustable output current, suitable for all two-phase hybrid stepper motors with currents less than 5.6A. Offers 15 microstep modes with multi-step resolution adjustment from 400 to 25600.. Stable output 350W 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range 100V or 240V AC selected by switch to choose input voltage.. Plug-and-Play Works seamlessly with CNC. Comes with a Mach3 control cardnot required if not needed, controlled by computer software, supporting up to 5-axis simultaneous control. Strong anti-interference capability and high reliability..

This CNC kit part is functionally equivalent the fixed bearing ball block end support BK12 for linear motion Ball Screw 16mm and the aluminum motor mounting mount holder bracket for Nema 23 Stepper Motor. The integration of the bearing ball block and motor mounting bracket, make the motor shaft, coupling axial, axial bearing hole, and ball screw axis all in a line strictly, the cnc transmission system with more accurately, less noise and longer life. The material is cast aluminum, high hardness, shock resistance and high precision machining the product is beautiful, rust proof and durable. We also have the cast steel style. We provide the CAD and 3D files for the item, you could message us to get them We also provide all the cnc ball screw parts accessories, if you have any needs, please let us know. Widely UsedThe integrated bearing end support block and motor mount bracket holder are widely used for stepper motor, servo motors, the cnc ball screw, lead screw parts for the 3d printer router engraving milling machine.

This driver is an upgraded version of TB6600 and with plastic cover.. The subdivision is increased to 32 subdivision, which is suitable for high subdivision.. Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.. Suitable for step motorNEMA17,23 42, 57 type 2 phase 4 phase 4 6 8 wires. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices..

This mounting bracket is manufactured by integral forming of 3mm steel plate and welds fixed bar on each side of the holder, strong and tough. strong mounting and easy to install. Mounting Holes The distance from the center of the hole to the ground is 39mm, all slotted and holes openings are made of high-precision punch press once stamping, ensureing that absolutely the dimensions are absolutely accurate and precise, and with the motor fit tightly.. Our motor fixed seat adopts advanced anti-rust paint technique, Durable with alloy steel material,which makes the bracket be used for a long-term. All slot hole for high precision punch a punching processing,perfect fit for your 57mm Nema 23 Stepper Motor. Package Included 4pcs mounting bracket, 16pcs M4 mounting screws.

57-56 nema 23 stepper motor, motor size 22.4x22.4x22. Come with 80CM 31.49 Cable. High torque -Holding torque up to 1.2Nm. Rate Voltage 5.2V DC. Rated Current 2.0 A. Widely works for Most 3D Printer CNC Machine and Robotics.

Package 1PCS. Specification1.2Nm175oz.in holding torqueCurrent3A,Step angle1.8phase2Resistance0.9510inductance2.820mH. Size Frame Size 57 x 57mm ,Body Length 56mm ,Shaft Diameter 8mm , Shaft Length 21mm. Connection RedA, GreenA-, YellowB, BlueB-. Warning Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor..

All-in-One Stepper Motor Controller Driver This integrated control module combines both driver and controller functions for unipolar two-phase, 4-wire stepper motors. It has multiple built-in operation modes, allowing users to quickly select optimal motion trajectories. It features power-off memory for storing distancespeeddelaycycle count settings. The module can operate either as a standalone unit or integrate with other systems, making it suitable for various industrial control applications.. Intuitive HD LCD Display Our high-resolution display provides real-time monitoring of speed, delay, and cycle parameters for effortless adjustment. The intuitive interface enables precise motor control while the TTL serial port ensures compatibility with industrial PLCs and PCs. Expandable control interfaces allow direct integration with robotic arms, CNC equipment, 3D printer and automated production systems.. High-Power 6.6A Industrial Drive Supports 425786 series stepper motors with powerful 6.6A output, ideal for CNC machines, automated production lines, 3D printer and logistics equipment. Wide 10-30V DC input voltage adapts to complex factory power environments. Suitable for Nema 172334 Stepper Motors.. Forward Reverse It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application. It's suitable for small mechanical equipment applications industrial automation control motor modular application.. 15 Working Modes Built-in 15 fixed operating modes, and you can quickly select the appropriate motion track to meet the needs of different scenarios, such as follow modeJog Controlcycle according to the set distance, reverse direction after reaching the limit, reverse cycle according to the set time, etc..

SpecificationHybrid Stepper1.8 degree 1.8Nm270oz-in 1ohms 3A3.5mH-201KHz57 x 57 x 76 mm,4-Lead WireFront shaft is 8mm diameter and 21mm lenth,back shaft is 6.35mm dia and 10mm length,Step angle accuracy - 5full step,not load,Resistance accuracy - 10,Inductance accuracy - 20,Temperature rise 80deg Maxrated current,2 phase on,Ambient temperature 20deg-50deg. Excellent MaterialThe 23HS8430B Nema23 stepper motor casing is made of sturdy and durable metal The internal coil adopts pure copper enameled wire to ensure that long-term operation will not cause excessive engine temperature High quality motor steel plate, with small self inductance reactance and fast response of bearings, can be directly connected to loads for low-speed operation without the need for gear reduction, and has a longer service life. Low noiseThe perfect combination of rubber and rotor makes the internal structure more stable with low noise. This reduces the vibration and noise during engine operation. Widely applicationThe Nema23 Stepper Motor is widely used in engraving machine, printer, medical equipment,embroidery machine, stage lighting, textile automation, printing,packaging and other industries automation equipment. Package include1PC 23HS8430B Nema23 Stepper Motor Dual shaft 76mm, 270oz-in,3A.

23HS8430B Motor ParameterPhase 2 Phase Step Angle 1.8 degree Frame Size 57x57x76mm Shaft Diameter 8mm Holding Torque 180N.cm 270Oz-in Phase Resistance 1ohms Rated Currentphase 3A Inductance 3.5mH-201KHz.. Excellent PerformanceIt has high torque, the stepper motor's power is 15-20 higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.. Advanced TechnologyThe motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.. High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.. Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction..

Rigid Motor Support for Motion SystemsDesigned to provide stable and secure mounting for Nema 23 stepper motors, these heavy duty steel brackets help reduce unwanted movement and vibration in CNC machines, 3D printers, and motion control systems. Compatible with Standard Nema 23 MotorsEngineered for standard 57mm Nema 23 stepper motor mounting patterns, allowing easier alignment and installation in automation frames, linear rail assemblies, and custom machine builds. Heavy Duty Steel ConstructionMade from durable steel material to provide strong structural support under continuous operation. Helps maintain mounting stability during high-speed or repeated motor movement applications. Ideal for CNC, Robotics DIY AutomationSuitable for CNC routers, 3D printers, robotic arms, belt drive systems, linear motion platforms, and other automation equipment requiring reliable stepper motor mounting support. Complete Mounting Hardware IncludedIncludes mounting screws and nuts for easier installation and faster assembly, helping simplify motor mounting and machine frame setup for both professional and hobby projects.

Motor and TB6600 Driver wiringStepper motor's RED wire connects to driver's A port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B port. Stepper motor's BLUE wire connects to driver's B- port.. Control Card and TB6600 Driver wiring X-axis as an example Driver's CLK- connects to control card's XP pin , Driver's CW- connects to control card's XD pin , Driver's 5V connects to control card's 5V pin.The USB Mach3 control card can't support connection EN- and EN.. Low NoiseHigh Torque Hybrid Stepper Motor23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in 180N.cm18kg-cm. The motor runs quietly and doesn't cause the generator to become too hot over a long time.. Upgraded 4.5A Stepper Motor DriverUsing the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 14, 18, 116 step, up to 425786 two-phase four-phase four-wire six-wire stepper motors within 4.2A. six-wire stepper motor.. USB Interface, Drive-free Design 4-Axis Linkage Control CardOutput pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.. Multi-function control cardWith support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control PWM mode and Him electrical mode, handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.. Stable output 24V DC power supplyOver-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance..

Specifications of Motor Holding Torque 2N.m Current 4.2A Peak Current 6A Phase 2 Size 57x57x76 mm Step Angle 1.8 degree Motor Lead Wire 4-wire Encoder lines 1000 Insulation ClassB Motor Weight2.4 LB. Specifications of 2HSS57 Driver 2-Phase Hybrid Stepper Servo Driver Frequency 0-200KHz Insulation resistance 500M Voltage DC 24-50V inputPulses response frequency can reach 200KHZ 16 kinds microsteps choice,highest 51200 microstepsrev. Advantages Stepper motor closed loop system,never lose step The stepper motor control has a new generation of 32-bit DSP. The vector control technology can increase the accuracy of the motor Improve motor output torque and working speed Automatic current adjustment based on load. More Functions It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely. Widely used Closed loop stepper system can be applied to all kinds small automatic equipment and instrument,such as milling machine, engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so onThis motor driver kit fits all types of machine load conditions without adjusting the gain parameters.

Nema 23 Stepper Motor, great for 3D printer and CNC.. Each phase draws current 2.8A, allowing for a holding torque of 1.26Nm178.5oz.in.. 30cm lead wire, 2-phase 4-wire, available for rotation of forward and reverse.. With 1.8 step angle 200 stepsrevolution. Precisely machined full metal body, size 57mm57mm56mm..

Dimensional details The physical dimensions of a Nema 23 Stepper Motor are summarized below. Body size 57x57x54.4mm2.25x2.25x2.15in, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, Installation hole distance 47mm, with Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 717g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Resistance 0.5, Rated current 4.2A, Inductance 1.2mH20, Rotor inertia approx 300g.cm.. Safety This Nema23 Step Motor operates safely and reliably. Here are its key safety parameters Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F Temperature rise 80K MAX.. Unlock Machine Capability Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Information Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. Used in 3D printers, DIY robots, CNC machines, and other systems, the Nema 23 Stepper Motor's compact size and high torque make it suitable for tough applications..

Dimensional data Key dimensions for Nema 23 Stepper Motor include the following. Body size 57x57x75.4mm2.25x2.25x2.97in, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47mm, with Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 1082g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 2Nm 283.22ozin, Resistance 0.6, Rated current 4.2A, Inductance 1.8mH20, Rotor inertia approx 495g.cm.. Safety Data This Nema23 Step Motor ensures safe and reliable performance, and here are its key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F.. Smooth, Powerful Drive Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Points to Remember Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is widely used in 3D printers, DIY robots, CNC machines, and more. Its compact design and high torque make it ideal for tough applications..

Size Specifications Nema 23 Stepper Motor dimensional parameters are as follows. Body size 57x57x40.4mm2.25x2.25x1.6in, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, Installation hole distance 47mm, incl. Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 477g.. Performance Data Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Resistance 1.6, Rated current 2.0A, Rotor inertia approx 135g.cm, Inductance 3.5mH20.. Safety Specifications The safe and reliable operation of this 57mm Step Motor is supported by these key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity Temperature rise 80K MAX.. More Power, Less Noise Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Points Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. Widely used in 3D printers, DIY robots, CNC machines, and other automated systems, the Nema 23 Stepper Motor offers compact size and high torque for tough tasks..

Specifications Nema 23 Stepper Motor has the following various dimensional parameters. Body size 57x57x40.4mm2.25x2.25x1.6in, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47mm, Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 488g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Rated current 2.0A, Resistance 1.6, Inductance 3.5mH20, Rotor inertia approx 135g.cm.. Safety Operating safely and reliably, this Nema 23 Step motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX.. Smarter Core Design Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Considerations Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is used in various applications like 3D printers, DIY robots, and CNC machines, offering a compact design and high torque for demanding tasks..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x54.4mm2.25x2.25x2.15in, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Installation hole distance 47mm, incl. Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 724g.. Performance Data Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Resistance 0.5, Rated current 4.2A, Rotor inertia approx 300g.cm, Inductance 1.2mH20.. Safety Compliance Operating safely and reliably, this Nema 23 Stepper motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature 15RH95RH-20 50 -4F122F Operation ambient humidity Temperature rise 80K MAX.. Exceptionally Quiet Powerhouse Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Things to Note Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. In 3D printers, DIY robots, and CNC machines, the Nema 23 Stepper Motor's compact size and high torque are perfect for a variety of demanding applications..

Size Specifications Dual Shaft Nema 23 stepper motor dimensional parameters are as follows. Body size 57x57x81.4mm 2.25x2.25x3.21in, Shaft diameter 6.35mm, Front shaft length 21mm, Front shaft D-cut length 21mm, Rear shaft length 15mm, Rear shaft D-cut length 15mm, Installation hole distance 47.14mm, Weight 235, 8-Lead Cable 1M.. Performance Data Nema 23 Dual Shaft Stepper Motor 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque unipolar 2Nm 283.22ozin , Holding torque series bipolar 2.8Nm 396.51ozin , Holding torque parallel bipolar 2.8Nm 396.51ozin , Rated current 2.1A, Resistance 1.2, Inductance 2.7mH20, Rotor inertia approx 565g.cm.. Operational Safety Operating safely and reliably, this Nema 23 double shaft stepper motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Significant Torque Upgrade Engineered for minimal noise interference, our enhanced Nema 23 Dual Shaft Stepper Motor boasts up to 20 greater holding torque through its higher-grade steel core construction and optimized winding technique. Experience smoother machine cycles with less surrounding disruption.. Notes to Remember Increasing speed lowers torque, with the recommended speed range of 0600 RPM. Lower current decreases both torque and temperature rise, and reduced voltage results in lower torque 2436V DC range. The Nema 23 Dual Shaft Stepper Motor is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks..

Specifications Nema 23 closed-loop stepper motor with integrated driver has the following various dimensional parameters. Body size 57x57x129mm 2.25x2.25x5.08in, Shaft length 21mm, Shaft diameter 8mm, D-cut length 15mm, Installation hole distance 47.14mm, Black A Green A- Red B Blue B-, incl. Cable 0.3M, Weight 1699g.. Characteristics Nema 23 Closed Loop Stepper Motor with built-in driver, 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque 3Nm 424.84ozin, Resistance 0.70, Rated current 4.2A, Rotor inertia approx 290g.cm, Inductance 2.4mH20.. Safety Compliance With safe and reliable operation, this Nema 23 Step motor with integrated closed-loop controller features the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH.. Unlock Machine Capability Offering up to 20 more holding torque than typical Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Controller, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Notes to Remember Increased speed reduces torque, with closed-loop at up to 1800 RPM. A lower current leads to lower torque and temperature rise, and reduced voltage results in lower torque recommended range 2436V DC. The Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Driver is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks..

Specifications Dimensional parameters of Nema 23 closed-loop stepper motor with integrated driver are as follows. Body size 57x57x73mm 2.25x2.25x2.88in, Shaft length 20.5mm, Shaft diameter 8mm, D-cut length 15mm, Installation hole distance 47.14mm, Black A Green A- Red B Blue B-, incl. Cable 0.3M, Weight 726g.. Characteristics Nema 23 Closed Loop Stepper Motor with built-in driver, 2 Phase, Step angle 1.8 Degree200 stepsrev, Holding torque 1.1Nm 155.77ozin, Rated current 4.0A, Resistance 0.45, Inductance 1.1mH20, Rotor inertia approx 200g.cm.. Safety Compliance Operating safely and reliably, this Nema 23 Step motor with integrated closed-loop controller comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Operation ambient temperature -2050 -4F122F Operation ambient humidity 15RH95RH Temperature rise 80K MAX.. Precision-Built for Higher Output Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Controller offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Points Increased speed reduces torque, with closed-loop at up to 1800 RPM. A lower current leads to lower torque and temperature rise, and reduced voltage results in lower torque recommended range 2436V DC. Widely used in 3D printers, DIY robots, CNC machines, and other automated systems, the Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Driver offers compact size and high torque for tough tasks..

Specifications Nema 23 Stepper Motor has the following various dimensional parameters. Body size 57x57x40.4mm, 2.25x2.25x1.6in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, with Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 477g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Resistance 1.6, Rated current 2.0A, Inductance 3.5mH20, Rotor inertia approx 135g.cm.. Safety Compliance Operating safely and reliably, this Nema23 Step motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F.. Precision-Built for Higher Output Built with advanced steel cores and precisely tuned windings, this Nema 23 Step Motor generates up to 20 stronger holding torque while significantly reducing noise output. Achieve smoother machine motion and lower acoustic impact.. Important Notes Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is used in 3D printers, DIY robots, CNC machines, and other automated systems. Its compact size and high torque suit demanding applications..

Size Specifications Nema 23 Stepper Motor dimensional parameters are as follows. Body size 57x57x54.4mm, 2.25x2.25x2.15in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, with Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 724g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Resistance 0.5, Rated current 4.2A, Inductance 1.2mH20, Rotor inertia approx 300g.cm.. Operational Safety This 57 mm Stepper Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH.. Advanced Steel Construction Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Key Details Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. Commonly used in 3D printers, DIY robots, CNC machines, and other automated systems, the Nema 23 Stepper Motor is compact yet provides high torque for heavy-duty tasks..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x100.4mm, 2.25x2.25x3.96in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, with Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 1499g.. Parameters Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 3Nm 424.84ozin, Resistance 0.8, Rated current 4.2A, Inductance 2.8mH20, Rotor inertia approx 750g.cm.. Safety Data This Nema 23 Stepper Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient humidity 15RH95RH Operation ambient temperature -20 50 -4F122F Temperature rise 80K MAX.. Significant Torque Upgrade Offering up to 20 more holding torque than typical Nema 23 Step Motor, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Important Details As speed increases, torque decreases. Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current lowers both torque and temperature rise, and lower voltage reduces torque 2436V DC recommended. The Nema 23 Stepper Motor is perfect for 3D printers, DIY robots, CNC machines, and other automated systems, offering a compact size and high torque for demanding tasks..

Dimensional data Key dimensions for Nema 23 Stepper Motor include the following. Body size 57x57x40.4mm, 2.25x2.25x1.6in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, incl. Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 488g.. Specifications Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 0.72Nm 101.96ozin, Resistance 1.6, Rated current 2.0A, Rotor inertia approx 135g.cm, Inductance 3.5mH20.. Operational Safety This 57 Step Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH Temperature rise 80K MAX.. Elevate Your Equipment Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Notes to Remember Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is ideal for 3D printers, DIY robots, CNC machines, and other other automated systems, with compact size and high torque for complex tasks..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x54.4mm, 2.25x2.25x2.15in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 6.35mm, D-cut length 21mm, Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 717g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 1.3Nm 184.1ozin, Rated current 4.2A, Resistance 0.5, Inductance 1.2mH20, Rotor inertia approx 300g.cm.. Safety Data With safe and reliable operation, this Nema 23 Stepper Motor features the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH Insulation classUL B 130 266F Temperature rise 80K MAX.. Significant Torque Upgrade Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Details Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor is perfect for 3D printers, DIY robots, CNC machines, and other automated systems, offering a compact size and high torque for demanding tasks..

Specifications Nema 23 Stepper Motor has the following various dimensional parameters. Body size 57x57x81.4mm, 2.25x2.25x3.21in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, incl. Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 1180g.. Performance Data Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 2.2Nm 311.55ozin, Resistance 0.6, Rated current 4.0A, Rotor inertia approx 565g.cm, Inductance 1.8mH20.. Safety Compliance With safe and reliable operation, this 57mm Step Motor features the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Operation ambient temperature -20 50 -4F122F Operation ambient humidity Temperature rise 80K MAX.. Precision-Built for Higher Output Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Notes As speed increases, torque decreases. Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current lowers both torque and temperature rise, and lower voltage reduces torque 2436V DC recommended. The Nema 23 Stepper Motor is used in 3D printers, DIY robots, CNC machines, and other automated systems. Its compact size and high torque suit demanding applications..

Dimensional details The physical dimensions of a Nema 23 Stepper Motor are summarized below. Body size 57x57x75.4mm, 2.25x2.25x2.97in, Installation hole distance 47mm, Shaft length 210.5mm, Shaft diameter 8mm, D-cut length 21mm, Cable 1m, 4-Wire Black A Green A- Red B Blue B-, Weight 1082g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8dge 200 stepsrev, Holding torque 2Nm 283.22ozin, Rated current 4.2A, Resistance 0.6, Inductance 1.8mH20, Rotor inertia approx 495g.cm.. Safety Specifications The safe and reliable operation of this 57mm Stepper Motor is supported by these key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH.. High Torque Low Noise Leveraging reinforced steel cores and meticulously wound coils, this Nema 23 Step Motor offers up to 20 increased holding torque versus standard units. Benefit from a quieter operational profile and minimal environmental disturbance.. Important Insights Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current reduces torque and temperature rise, while lower voltage decreases torque recommended range 2436V DC. The Nema 23 Stepper Motor fits 3D printers, DIY robots, CNC machines, and other automated systems, offering a small size and high torque for performance-driven tasks..

Size specifications Ratio 51 Planetary Gearbox for Nema 2324 Stepper Motor 8mm-21mm38.1mm-2mmF47.14mm-M4Compatible shaft length range 8-21mm, Body length 57-67mm 2.25-2.64in, Input shaft diameter 8 mm, Input shaft length 21mm, Output shaft diameter 14 mm, Output shaft length 35 mm, Installation hole distance 47.14mm, Weight 235g.. Characteristics Nema 23 planetary gearbox, Backlash 15 arcmin, Efficiency 95, Nominal output torque 25Nm 3540.3ozin, Moment permissible torque 50Nm 7080.6ozin, Nominal input speed 3000rpm, Max. input speed 4000rpm, Radial force 490N, Axial force 460N.. Performance Durability Engineered for precision and endurance, this Nema 24 23 planetary reducer meets the following critical specifications Noise 60db, Waterproof rating IP65, Working temperature -1580, Lifetime 20000H.. Superior Performance Durable, quiet, and powerful this planetary gear for Nema 2324 handles heavy-duty loads while maintaining reliable, low-maintenance operation for up to 20,000 hours.. Application scenario From automated systems to precision tools, this planetary gearbox excels where low speed and high torque are key. Its efficient design ensures reliable, controlled movement in every application..

Dimensional details The physical dimensions of a Nema 23 closed-loop stepper motor with integrated driver are summarized below. Body size 57x57x94mm 2.25x2.25x3.71in, Shaft length 21mm, Shaft diameter 8mm, D-cut length 15mm, Installation hole distance 47.14mm, Black A Green A- Red B Blue B-, Cable 0.3M, Weight 1070g.. Parameters Nema 23 Closed Loop Stepper Motor with built-in driver, 2 Phase, Step angle 1.8dge200 stepsrev, Holding torque 1.8Nm 254.9ozin, Resistance 0.45, Rated current 4.0A, Rotor inertia approx 230g.cm, Inductance 1.4mH20.. Safety Specifications The safe and reliable operation of this Nema 23 Step motor with integrated closed-loop controller is supported by these key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation resistance 100M MIN Insulation classUL B 130 266F Temperature rise 80K MAX Operation ambient humidity 15RH95RH Operation ambient temperature -2050 -4F122F.. More Power, Less Noise Offering up to 20 more holding torque than typical Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Controller, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Important Details Increased speed reduces torque, with closed-loop at up to 1800 RPM. A lower current leads to lower torque and temperature rise, and reduced voltage results in lower torque recommended range 2436V DC. The Nema 23 Closed Loop Stepper Motor with Closed Loop Stepper Driver is perfect for 3D printers, DIY robots, CNC machines, and other automated systems, offering a compact size and high torque for demanding tasks..

FULLY FUNCTIONAL Our high torque stepper motor is a Nema23 57x57x76mm 2.242.243 inch, all-in-one integrated CAN interface smart servo step motor that comes with an encoder, motor driver, in an alloy aluminum case.. HIGH TORQUE Holding Torque 1.2 N.m. Running with no vibrationnoise and high torque, good substitution of ACDC servo motor at low speed.. EXCELLENT DESIGN Closed-loop motion, high positioning accuracy, fast response, and high speed to 1000 rpm. Supports speed control mode, position control mode, backlash compensation, stall detection, and many other control functions.. SPECIFICATIONS Type Hybrid Encoder line number 1000 Motor length 57x57x56mm 2.242.242.2 inch Shaft Diameter8mm Total length76mm3 inch Lead wire 4pcs Support DC Power SupplyDC20-48V Current4.2A.. HIGH PRECISION It is a new motor-driven integrated hybrid servo drive system with communication function.Using a new generation of 32-bit DSP control and closed-loop control, it can prevent out-of-step and ensure the accuracy of the product..

Package Includes 1 pcs high torque CNC stepper motor, with 50cm20inch XH2.54 cable, advanced magnetic circuitry and low noise.Smooth and reliable run, ensuring accurate positioning and efficient motion control. Low Noise 58.84N.cm83.3oz.in holding torque, drive voltage 24V - 60V, rated current 2A, resistance 2ohms. Size NEMA 23 bipolar 57 x 57 x 40mm2.24 x2.24 x1.57inch, 2 phase, 4 wire, shaft diameter 8mmD-Shaft 7.5mm, shaft length 21mm. Application Nema 23 Stepper Motor is used in CNC machine, milling machine, 3D printer, laser engraving, semiconductor equipment and other automation systems. Compact size and high torque make it suitable for various demanding applications. Note Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will damage the motor.

High-Speed Precision with Closed-Loop Motors Powered by NEMA23-76 closed-loop stepper motors, the Masuter 3S eliminates step-loss and delivers a massive 2.2 Nm of torque. Reach rapid moving speeds up to 10,000mmmin with high-precision accuracy, making your workflow both faster and more reliable. 3D Cylindrical Carving Ready Unlock 360 engraving capabilities with built-in support for the 4th Axis Rotary Module ASIN B0GKGQJ8FV. Easily switch to rotary mode to carve intricate designs on mugs, chess pieces, and other cylindrical objects. Industrial-Grade Stability Accuracy Built with reinforced 2360mm extrusions and dual HG-15 linear rails on the Z-axis. The T12 lead screw design minimizes vibration and wobble, achieving an ultra-fine engraving precision of 0.05mm for professional-grade results. Powerful 400W Spindle Versatile Upgrades The included 400W spindle easily handles wood, plastics, and soft metals like aluminum. It includes a 65mm clamp for an effortless upgrade to a handheld trimmer router and 1.5kW spindle, and supports high-power engraving modules for expanded project variety. Upgraded Dust-Proof Controller Box Experience seamless operation with the redesigned controller box featuring tactile shortcut buttons and a dust-resistant housing. It is fully compatible with our Offline Controller ASIN B0DC6HHNH4 for PC-free carving and easier workshop management. Large Expandable Working Area The generous 15.75 x 15.75 x 3.74 workspace is perfect for hobbyists and professionals alike. For even larger projects, the machine is fully compatible with our X-Axis Extension Kit ASIN B0D5HK72MP to significantly increase your carving surface.

Items in Kit 3 Pcs 2Nm nema23 Closed loop stepper motor with 1000line encoder. 3 Pcs Nema 23 stepper motor driver. 1 Pc 24V 350W Power Supply and 1 Pc USB Mach3 Card. This is a complete stepper motor motion control system for professional 3d printer DIY kit.. Specifications of Nema23 Stepper Motor Holding Torque 2N.m Current 3A 2 phase 4 wire Step Angle 1.8 degree Encoder 1000 lines Inductance 2 mH Resistance 0.7 ohm Motor Length 57x57x80 mm 2.242.243.15 inch.. Parameter of Nema23 Closed Loop Stepper Motor Driver DSP Closed loop stepper drive Impulse response frequency 200KHz. Supply voltage DC 24-80Vdc, Compatible 4.528V signal continuous output current 0.5-13A. Micro-stepping driver 20025600ppr Signal input Support PULDIR and CWCCW modes difference. This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.. Stable output 24V 350W DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range 110V or 220V AC selected by switch to choose input voltage.. Functions of the Mach3 Control Board It supports 5-axis linkage control at most. Strong anti-interference and high reliability. Applications Nema 23 closed loop stepper motor kit can be applied to all kinds small and medium-sized automation equipment and instrument,such as 3D printer, CNC machine, milling machine, carving machine, special industrial sewing machine, stripping machine, marking machine, graph plotter, cnc machine, automatic assembly equipment,automation application and so on..

Specifications Dimensional parameters of Nema 23 Stepper Motor are as follows. Body size 57x57x109.4mm2.25x2.25x4.31in, Shaft length 210.5mm, Shaft diameter 10mm, D-cut length 21mm, Installation hole distance 47mm, Cable 1m, 4-Lead Black A Green A- Red B Blue B-, Weight 1663g.. Characteristics Nema 23 Stepper Motor 2 Phase, Step angle 1.8 Degree 200 stepsrev, Holding torque 3.5Nm 495.64ozin, Rated current 4.2A, Resistance 1.0, Inductance 4.0mH20, Rotor inertia approx 850g.cm.. Safety Compliance This 57mm Stepper Motor boasts safe and reliable operation, with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE Insulation classUL B 130 266F Insulation resistance 100M MIN Temperature rise 80K MAX Operation ambient temperature -20 50 -4F122F Operation ambient humidity 15RH95RH.. Exceptionally Quiet Powerhouse Offering up to 20 more holding torque than typical Nema 23 Step Motor, our version focuses on low-noise operation. Its enhanced steel core and winding design ensure smooth motion and significantly decreased sound emission.. Things to Note As speed increases, torque decreases. Faster speeds lead to lower torque, so the recommended range is 0600 RPM. Lower current lowers both torque and temperature rise, and lower voltage reduces torque 2436V DC recommended. In 3D printers, DIY robots, and CNC machines, the Nema 23 Stepper Motor's compact size and high torque are perfect for a variety of demanding applications..

4 pieces of Nema 23 56mm length stepper motors in one set. 1.26Nm 179oz.in torque. 2.8A current.. Four lead wires.. Ideal for CNC Mill, Lathe, Router or other CNC projects..

Very Huge Torque. 3Nm425oz.in holding torque. NEMA 23 bipolar 2.24x2.24x4.45 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 4.2A resistance 0.9ohms.

Nema 23 cnc stepper motor, up to 269oz-in or 1.9Nm holding torque. Rated current 2.8A resistance 1.13ohms. Step angle 1.8200 stepsrev. 4-wire, 11.81 cable. Connection BlackA, GreenA-, RedB, BlueB-. RoHS and CE Certified. Tightly packed in cut foam. Widely used for 3D printer, CNC milling, small robotics, stage lighting, laser engraving, textile machinery, medical equipment, placement machine, automation equipment.

1 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor. 1 x Nema 23 Bipolar 1.8deg 1.9Nm 269oz.in 3.0A 3.36V 57x57x76mm 4 Wires.

This CNC kit included. 1 x Nema 23 Bipolar 3Nm 425oz.in 4.2A 57x57x114mm 4 Wires CNC Stepper Motor. 1x Digital Stepper Driver 1.85.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor.

Package in 3PCS. 3Nm425oz.in holding torque. NEMA 23 bipolar 2.24x2.24x4.45 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 4.2A resistance 0.9ohms.

Package in 3PCS. 1.26Nm178.5oz.in holding torque. NEMA 23 bipolar 2.24x2.24x2.2 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 0.9ohms.

Package in 3PCS. 1.9Nm269oz.in holding torque. NEMA 23 bipolar 2.24x2.24x3.0 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 1.13ohms.

1.9Nm269oz.in holding torque. Single Shaft 6.35mm diameter. NEMA 23 bipolar 2.24x2.24x3.0 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 1.13ohms.

Higher Torque. 1.26Nm178.5oz.in holding torque. NEMA 23 bipolar 2.24x2.24x2.2 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 2.8A resistance 0.9ohms.